| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm handling updates from Ingo Molnar:
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency
reduction efforts
- Misc cleanups & fixes
* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
selftests/x86/lam: Zero out buffer for readlink()
x86/sev: Drop unneeded #include
x86/sev: Move sev_setup_arch() to mem_encrypt.c
x86/tdx: Replace deprecated strncpy() with strtomem_pad()
selftests/x86/mm: Add new test that userspace stack is in fact NX
x86/sev: Make boot_ghcb_page[] static
x86/boot: Move x86_cache_alignment initialization to correct spot
x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
x86_64: Show CR4.PSE on auxiliaries like on BSP
x86/iommu/docs: Update AMD IOMMU specification document URL
x86/sev/docs: Update document URL in amd-memory-encryption.rst
x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
x86/numa: Introduce numa_fill_memblks()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq fix from Ingo Molnar:
"Fix out-of-order NMI nesting checks resulting in false positive
warnings"
* tag 'x86-irq-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Fix out-of-order NMI nesting checks & false positive warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Ingo Molnar:
- Make IA32_EMULATION boot time configurable with
the new ia32_emulation=<bool> boot option
- Clean up fast syscall return validation code: convert
it to C and refactor the code
- As part of this, optimize the canonical RIP test code
* tag 'x86-entry-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/32: Clean up syscall fast exit tests
x86/entry/64: Use TASK_SIZE_MAX for canonical RIP test
x86/entry/64: Convert SYSRET validation tests to C
x86/entry/32: Remove SEP test for SYSEXIT
x86/entry/32: Convert do_fast_syscall_32() to bool return type
x86/entry/compat: Combine return value test from syscall handler
x86/entry/64: Remove obsolete comment on tracing vs. SYSRET
x86: Make IA32_EMULATION boot time configurable
x86/entry: Make IA32 syscalls' availability depend on ia32_enabled()
x86/elf: Make loading of 32bit processes depend on ia32_enabled()
x86/entry: Compile entry_SYSCALL32_ignore() unconditionally
x86/entry: Rename ignore_sysret()
x86: Introduce ia32_enabled()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 assembly code updates from Ingo Molnar:
- Micro-optimize the x86 bitops code
- Define target-specific {raw,this}_cpu_try_cmpxchg{64,128}() to
improve code generation
- Define and use raw_cpu_try_cmpxchg() preempt_count_set()
- Do not clobber %rsi in percpu_{try_,}cmpxchg{64,128}_op
- Remove the unused __sw_hweight64() implementation on x86-32
- Misc fixes and cleanups
* tag 'x86-asm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib: Address kernel-doc warnings
x86/entry: Fix typos in comments
x86/entry: Remove unused argument %rsi passed to exc_nmi()
x86/bitops: Remove unused __sw_hweight64() assembly implementation on x86-32
x86/percpu: Do not clobber %rsi in percpu_{try_,}cmpxchg{64,128}_op
x86/percpu: Use raw_cpu_try_cmpxchg() in preempt_count_set()
x86/percpu: Define raw_cpu_try_cmpxchg and this_cpu_try_cmpxchg()
x86/percpu: Define {raw,this}_cpu_try_cmpxchg{64,128}
x86/asm/bitops: Use __builtin_clz{l|ll} to evaluate constant expressions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Rework PE header generation, primarily to generate a modern, 4k
aligned kernel image view with narrower W^X permissions.
- Further refine init-lifetime annotations
- Misc cleanups & fixes
* tag 'x86-boot-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/boot: efistub: Assign global boot_params variable
x86/boot: Rename conflicting 'boot_params' pointer to 'boot_params_ptr'
x86/head/64: Move the __head definition to <asm/init.h>
x86/head/64: Add missing __head annotation to startup_64_load_idt()
x86/head/64: Mark 'startup_gdt[]' and 'startup_gdt_descr' as __initdata
x86/boot: Harmonize the style of array-type parameter for fixup_pointer() calls
x86/boot: Fix incorrect startup_gdt_descr.size
x86/boot: Compile boot code with -std=gnu11 too
x86/boot: Increase section and file alignment to 4k/512
x86/boot: Split off PE/COFF .data section
x86/boot: Drop PE/COFF .reloc section
x86/boot: Construct PE/COFF .text section from assembler
x86/boot: Derive file size from _edata symbol
x86/boot: Define setup size in linker script
x86/boot: Set EFI handover offset directly in header asm
x86/boot: Grab kernel_info offset from zoffset header directly
x86/boot: Drop references to startup_64
x86/boot: Drop redundant code setting the root device
x86/boot: Omit compression buffer from PE/COFF image memory footprint
x86/boot: Remove the 'bugger off' message
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 header file cleanup from Ingo Molnar:
"Replace <asm/export.h> uses with <linux/export.h> and then remove
<asm/export.h>"
* tag 'x86-headers-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Remove <asm/export.h>
x86/headers: Replace #include <asm/export.h> with #include <linux/export.h>
x86/headers: Remove unnecessary #include <asm/export.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
- Add AMD Unified Memory Controller (UMC) events introduced with Zen 4
- Simplify & clean up the uncore management code
- Fall back from RDPMC to RDMSR on certain uncore PMUs
- Improve per-package and cstate event reading
- Extend the Intel ref-cycles event to GP counters
- Fix Intel MTL event constraints
- Improve the Intel hybrid CPU handling code
- Micro-optimize the RAPL code
- Optimize perf_cgroup_switch()
- Improve large AUX area error handling
- Misc fixes and cleanups
* tag 'perf-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
perf/x86/amd/uncore: Pass through error code for initialization failures, instead of -ENODEV
perf/x86/amd/uncore: Fix uninitialized return value in amd_uncore_init()
x86/cpu: Fix the AMD Fam 17h, Fam 19h, Zen2 and Zen4 MSR enumerations
perf: Optimize perf_cgroup_switch()
perf/x86/amd/uncore: Add memory controller support
perf/x86/amd/uncore: Add group exclusivity
perf/x86/amd/uncore: Use rdmsr if rdpmc is unavailable
perf/x86/amd/uncore: Move discovery and registration
perf/x86/amd/uncore: Refactor uncore management
perf/core: Allow reading package events from perf_event_read_local
perf/x86/cstate: Allow reading the package statistics from local CPU
perf/x86/intel/pt: Fix kernel-doc comments
perf/x86/rapl: Annotate 'struct rapl_pmus' with __counted_by
perf/core: Rename perf_proc_update_handler() -> perf_event_max_sample_rate_handler(), for readability
perf/x86/rapl: Fix "Using plain integer as NULL pointer" Sparse warning
perf/x86/rapl: Use local64_try_cmpxchg in rapl_event_update()
perf/x86/rapl: Stop doing cpu_relax() in the local64_cmpxchg() loop in rapl_event_update()
perf/core: Bail out early if the request AUX area is out of bound
perf/x86/intel: Extend the ref-cycles event to GP counters
perf/x86/intel: Fix broken fixed event constraints extension
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Misc fixes and cleanups:
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping
symbols
- Minor cleanups"
* tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Skip over mapping symbols in output from readelf
scripts/faddr2line: Use LLVM addr2line and readelf if LLVM=1
scripts/faddr2line: Don't filter out non-function symbols from readelf
objtool: Remove max symbol name length limitation
objtool: Propagate early errors
objtool: Use 'the fallthrough' pseudo-keyword
x86/speculation, objtool: Use absolute relocations for annotations
x86/unwind/orc: Remove redundant initialization of 'mid' pointer in __orc_find()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster
wakeup
NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more
consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded
performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no
state changes
Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler
headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock
guards
- Fix sched_setaffinity() vs. CPU hotplug race
Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
... and misc cleanups & fixes"
* tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
sched/fair: Remove SIS_PROP
sched/fair: Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
sched/fair: Scan cluster before scanning LLC in wake-up path
sched: Add cpus_share_resources API
sched/core: Fix RQCF_ACT_SKIP leak
sched/fair: Remove unused 'curr' argument from pick_next_entity()
sched/nohz: Update comments about NEWILB_KICK
sched/fair: Remove duplicate #include
sched/psi: Update poll => rtpoll in relevant comments
sched: Make PELT acronym definition searchable
sched: Fix stop_one_cpu_nowait() vs hotplug
sched/psi: Bail out early from irq time accounting
sched/topology: Rename 'DIE' domain to 'PKG'
sched/psi: Delete the 'update_total' function parameter from update_triggers()
sched/psi: Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
sched/headers: Remove comment referring to rq::cpu_load, since this has been removed
sched/numa: Complete scanning of inactive VMAs when there is no alternative
sched/numa: Complete scanning of partial VMAs regardless of PID activity
sched/numa: Move up the access pid reset logic
sched/numa: Trace decisions related to skipping VMAs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Info Molnar:
"Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from
the multiplex syscall and adds a little room for extentions, while
lifting some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref
code, and by better interfacing the CMPXCHG8B assembly code with
the compiler
- Introduce arch_sync_try_cmpxchg() on x86 to improve
sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic
but was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify the
API-instantiation macros a bit
RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(),
rtlock_lock() and rwbase_read_lock()
.. plus misc fixes & cleanups"
* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
futex: Don't include process MM in futex key on no-MMU
locking/seqlock: Fix grammar in comment
alpha: Fix up new futex syscall numbers
locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
locking/seqlock: Change __seqprop() to return the function pointer
locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
locking/seqlock: Fix typo in comment
futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
locking/local, arch: Rewrite local_add_unless() as a static inline function
locking/debug: Fix debugfs API return value checks to use IS_ERR()
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu fixlet from Borislav Petkov:
- kernel-doc fix
* tag 'x86_fpu_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Address kernel-doc warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Borislav Petkov:
- Make sure PCI function 4 IDs of AMD family 0x19, models 0x60-0x7f are
actually used in the amd_nb.c enumeration
- Add support for extracting NUMA information from devicetree for
Hyper-V usages
- Add PCI device IDs for the new AMD MI300 AI accelerators
- Annotate an array in struct uv_rtc_timer_head with the new
__counted_by attribute
- Rework UV's NMI action parameter handling
* tag 'x86_platform_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Use Family 19h Models 60h-7Fh Function 4 IDs
x86/numa: Add Devicetree support
x86/of: Move the x86_flattree_get_config() call out of x86_dtb_init()
x86/amd_nb: Add AMD Family MI300 PCI IDs
x86/platform/uv: Annotate struct uv_rtc_timer_head with __counted_by
x86/platform/uv: Rework NMI "action" modparam handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make sure the "svm" feature flag is cleared from /proc/cpuinfo when
virtualization support is disabled in the BIOS on AMD and Hygon
platforms
- A minor cleanup
* tag 'x86_cpu_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Remove redundant 'break' statement
x86/cpu: Clear SVM feature if disabled by BIOS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for non-contiguous capacity bitmasks being added to
Intel's CAT implementation
- Other improvements to resctrl code: better configuration,
simplifications, debugging support, fixes
* tag 'x86_cache_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Display RMID of resource group
x86/resctrl: Add support for the files of MON groups only
x86/resctrl: Display CLOSID for resource group
x86/resctrl: Introduce "-o debug" mount option
x86/resctrl: Move default group file creation to mount
x86/resctrl: Unwind properly from rdt_enable_ctx()
x86/resctrl: Rename rftype flags for consistency
x86/resctrl: Simplify rftype flag definitions
x86/resctrl: Add multiple tasks to the resctrl group at once
Documentation/x86: Document resctrl's new sparse_masks
x86/resctrl: Add sparse_masks file in info
x86/resctrl: Enable non-contiguous CBMs in Intel CAT
x86/resctrl: Rename arch_has_sparse_bitmaps
x86/resctrl: Fix remaining kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by
Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
* tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/retpoline: Document some thunk handling aspects
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
x86/callthunks: Delete unused "struct thunk_desc"
x86/vdso: Run objtool on vdso32-setup.o
objtool: Fix return thunk patching in retpolines
x86/srso: Remove unnecessary semicolon
x86/pti: Fix kernel warnings for pti= and nopti cmdline options
x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk()
x86/nospec: Refactor UNTRAIN_RET[_*]
x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros
x86/srso: Disentangle rethunk-dependent options
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
x86/bugs: Remove default case for fully switched enums
x86/srso: Remove 'pred_cmd' label
x86/srso: Unexport untraining functions
x86/srso: Improve i-cache locality for alias mitigation
x86/srso: Fix unret validation dependencies
x86/srso: Fix vulnerability reporting for missing microcode
x86/srso: Print mitigation for retbleed IBPB case
x86/srso: Print actual mitigation if requested mitigation isn't possible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Specify what error addresses reported on AMD are actually usable
memory error addresses for further decoding
* tag 'ras_core_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Cleanup mce_usable_address()
x86/mce: Define amd_mce_usable_address()
x86/MCE/AMD: Split amd_mce_is_memory_error()
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iov_iter updates from Christian Brauner:
"This contain's David's iov_iter cleanup work to convert the iov_iter
iteration macros to inline functions:
- Remove last_offset from iov_iter as it was only used by ITER_PIPE
- Add a __user tag on copy_mc_to_user()'s dst argument on x86 to
match that on powerpc and get rid of a sparse warning
- Convert iter->user_backed to user_backed_iter() in the sound PCM
driver
- Convert iter->user_backed to user_backed_iter() in a couple of
infiniband drivers
- Renumber the type enum so that the ITER_* constants match the order
in iterate_and_advance*()
- Since the preceding patch puts UBUF and IOVEC at 0 and 1, change
user_backed_iter() to just use the type value and get rid of the
extra flag
- Convert the iov_iter iteration macros to always-inline functions to
make the code easier to follow. It uses function pointers, but they
get optimised away
- Move the check for ->copy_mc to _copy_from_iter() and
copy_page_from_iter_atomic() rather than in memcpy_from_iter_mc()
where it gets repeated for every segment. Instead, we check once
and invoke a side function that can use iterate_bvec() rather than
iterate_and_advance() and supply a different step function
- Move the copy-and-csum code to net/ where it can be in proximity
with the code that uses it
- Fold memcpy_and_csum() in to its two users
- Move csum_and_copy_from_iter_full() out of line and merge in
csum_and_copy_from_iter() since the former is the only caller of
the latter
- Move hash_and_copy_to_iter() to net/ where it can be with its only
caller"
* tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter, net: Move hash_and_copy_to_iter() to net/
iov_iter, net: Merge csum_and_copy_from_iter{,_full}() together
iov_iter, net: Fold in csum_and_memcpy()
iov_iter, net: Move csum_and_copy_to/from_iter() to net/
iov_iter: Don't deal with iter->copy_mc in memcpy_from_iter_mc()
iov_iter: Convert iterate*() to inline funcs
iov_iter: Derive user-backedness from the iterator type
iov_iter: Renumber ITER_* constants
infiniband: Use user_backed_iter() to see if iterator is UBUF/IOVEC
sound: Fix snd_pcm_readv()/writev() to use iov access functions
iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()
iov_iter: Remove last_offset from iov_iter as it was for ITER_PIPE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
|
|
Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:
tsc: Marking TSC unstable due to check_tsc_sync_source failed
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock_irqsave+0x3f/0x60
clocksource_mark_unstable+0x1b/0x90
mark_tsc_unstable+0x41/0x50
check_tsc_sync_source+0x14f/0x180
sysvec_call_function_single+0x69/0x90
Possible unsafe locking scenario:
lock(watchdog_lock);
<Interrupt>
lock(watchdog_lock);
stack backtrace:
_raw_spin_lock+0x30/0x40
clocksource_watchdog+0x23/0x5a0
run_timer_softirq+0x2a/0x50
sysvec_apic_timer_interrupt+0x6e/0x90
The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().
clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,
Before that change the synchronization function was invoked in thread
context so this could not happen.
As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.
Fixes: 9d349d47f0e3 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx
|
|
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
|
|
For "reasons" Intel has code-named this CPU with a "_H" suffix.
[ dhansen: As usual, apply this and send it upstream quickly to
make it easier for anyone who is doing work that
consumes this. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231025202513.12358-1-tony.luck%40intel.com
|
|
Pick up recent sched/urgent fixes merged upstream.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
After a lot of experimenting (see thread Link points to) document for
now the issues and requirements for future improvements to the thunk
handling and potential issuing of a diagnostic when the default thunk
hasn't been patched out.
This documentation is only temporary and that close before the merge
window it is only a placeholder for those future improvements.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231010171020.462211-1-david.kaplan@amd.com
|
|
It looks like it was never used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/843bf596-db67-4b33-a865-2bae4a4418e5@p183
|
|
vdso32-setup.c is part of the main kernel image and should not be
excluded from objtool. Objtool is necessary in part for ensuring that
returns in this file are correctly patched to the appropriate return
thunk at runtime.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231010171020.462211-3-david.kaplan@amd.com
|
|
scripts/coccinelle/misc/semicolon.cocci reports:
arch/x86/kernel/cpu/bugs.c:713:2-3: Unneeded semicolon
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230810010550.25733-1-yang.lee@linux.alibaba.com
|
|
Parse the pti= and nopti cmdline options using early_param to fix 'Unknown
kernel command line parameters "nopti", will be passed to user space'
warnings in the kernel log when nopti or pti= are passed to the kernel
cmdline on x86 platforms.
Additionally allow the kernel to warn for malformed pti= options.
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20230819080921.5324-2-jo.vanbulck@cs.kuleuven.be
|
|
For consistency with the other return thunks, rename __x86_return_skl()
to call_depth_return_thunk().
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ae44e9f9976934e3b5b47a458d523ccb15867561.1693889988.git.jpoimboe@kernel.org
|
|
Factor out the UNTRAIN_RET[_*] common bits into a helper macro.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/f06d45489778bd49623297af2a983eea09067a74.1693889988.git.jpoimboe@kernel.org
|
|
Macros already exist for unaligned code block symbols. Use them.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/26d461bd509cc840af24c94586561c06d39812b2.1693889988.git.jpoimboe@kernel.org
|
|
CONFIG_RETHUNK, CONFIG_CPU_UNRET_ENTRY and CONFIG_CPU_SRSO are all
tangled up. De-spaghettify the code a bit.
Some of the rethunk-related code has been shuffled around within the
'.text..__x86.return_thunk' section, but otherwise there are no
functional changes. srso_alias_untrain_ret() and srso_alias_safe_ret()
((which are very address-sensitive) haven't moved.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/2845084ed303d8384905db3b87b77693945302b4.1693889988.git.jpoimboe@kernel.org
|
|
Simplify the code flow a bit by moving the retbleed IBPB check into the
existing 'has_microcode' block.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/0a22b86b1f6b07f9046a9ab763fc0e0d1b7a91d4.1693889988.git.jpoimboe@kernel.org
|
|
For enum switch statements which handle all possible cases, remove the
default case so a compiler warning gets printed if one of the enums gets
accidentally omitted from the switch statement.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/fcf6feefab991b72e411c2aed688b18e65e06aed.1693889988.git.jpoimboe@kernel.org
|
|
SBPB is only enabled in two distinct cases:
1) when SRSO has been disabled with srso=off
2) when SRSO has been fixed (in future HW)
Simplify the control flow by getting rid of the 'pred_cmd' label and
moving the SBPB enablement check to the two corresponding code sites.
This makes it more clear when exactly SBPB gets enabled.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/bb20e8569cfa144def5e6f25e610804bc4974de2.1693889988.git.jpoimboe@kernel.org
|
|
These functions aren't called outside of retpoline.S.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1ae080f95ce7266c82cba6d2adde82349b832654.1693889988.git.jpoimboe@kernel.org
|
|
Move srso_alias_return_thunk() to the same section as
srso_alias_safe_ret() so they can share a cache line.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/eadaf5530b46a7ae8b936522da45ae555d2b3393.1693889988.git.jpoimboe@kernel.org
|
|
CONFIG_CPU_SRSO isn't dependent on CONFIG_CPU_UNRET_ENTRY (AMD
Retbleed), so the two features are independently configurable. Fix
several issues for the (presumably rare) case where CONFIG_CPU_SRSO is
enabled but CONFIG_CPU_UNRET_ENTRY isn't.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/299fb7740174d0f2335e91c58af0e9c242b4bac1.1693889988.git.jpoimboe@kernel.org
|
|
The SRSO default safe-ret mitigation is reported as "mitigated" even if
microcode hasn't been updated. That's wrong because userspace may still
be vulnerable to SRSO attacks due to IBPB not flushing branch type
predictions.
Report the safe-ret + !microcode case as vulnerable.
Also report the microcode-only case as vulnerable as it leaves the
kernel open to attacks.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/a8a14f97d1b0e03ec255c81637afdf4cf0ae9c99.1693889988.git.jpoimboe@kernel.org
|
|
When overriding the requested mitigation with IBPB due to retbleed=ibpb,
print the mitigation in the usual format instead of a custom error
message.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ec3af919e267773d896c240faf30bfc6a1fd6304.1693889988.git.jpoimboe@kernel.org
|
|
If the kernel wasn't compiled to support the requested option, print the
actual option that ends up getting used.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/7e7a12ea9d85a9f76ca16a3efb71f262dee46ab1.1693889988.git.jpoimboe@kernel.org
|
|
Make the SBPB check more robust against the (possible) case where future
HW has SRSO fixed but doesn't have the SRSO_NO bit set.
Fixes: 1b5277c0ea0b ("x86/srso: Add SRSO_NO support")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/cee5050db750b391c9f35f5334f8ff40e66c01b9.1693889988.git.jpoimboe@kernel.org
|
|
Qi Zheng reported crashes in a production environment and provided a
simplified example as a reproducer:
| For example, if we use Qemu to start a two NUMA node kernel,
| one of the nodes has 2M memory (less than NODE_MIN_SIZE),
| and the other node has 2G, then we will encounter the
| following panic:
|
| BUG: kernel NULL pointer dereference, address: 0000000000000000
| <...>
| RIP: 0010:_raw_spin_lock_irqsave+0x22/0x40
| <...>
| Call Trace:
| <TASK>
| deactivate_slab()
| bootstrap()
| kmem_cache_init()
| start_kernel()
| secondary_startup_64_no_verify()
The crashes happen because of inconsistency between the nodemask that
has nodes with less than 4MB as memoryless, and the actual memory fed
into the core mm.
The commit:
9391a3f9c7f1 ("[PATCH] x86_64: Clear more state when ignoring empty node in SRAT parsing")
... that introduced minimal size of a NUMA node does not explain why
a node size cannot be less than 4MB and what boot failures this
restriction might fix.
Fixes have been submitted to the core MM code to tighten up the
memory topologies it accepts and to not crash on weird input:
mm: page_alloc: skip memoryless nodes entirely
mm: memory_hotplug: drop memoryless node from fallback lists
Andrew has accepted them into the -mm tree, but there are no
stable SHA1's yet.
This patch drops the limitation for minimal node size on x86:
- which works around the crash without the fixes to the core MM.
- makes x86 topologies less weird,
- removes an arbitrary and undocumented limitation on NUMA topologies.
[ mingo: Improved changelog clarity. ]
Reported-by: Qi Zheng <zhengqi.arch@bytedance.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/ZS+2qqjEO5/867br@gmail.com
|
|
//git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Take care of a race between when the #VC exception is raised and when
the guest kernel gets to emulate certain instructions in SEV-{ES,SNP}
guests by:
- disabling emulation of MMIO instructions when coming from user mode
- checking the IO permission bitmap before emulating IO instructions
and verifying the memory operands of INS/OUTS insns"
* tag 'sev_fixes_for_v6.6' of //git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Check for user-space IOIO pointing to kernel space
x86/sev: Check IOBM for IOIO exceptions from user-space
x86/sev: Disable MMIO emulation from user mode
|
|
The x86 decompressor is built and linked as a separate executable, but
it shares components with the kernel proper, which are either #include'd
as C files, or linked into the decompresor as a static library (e.g, the
EFI stub)
Both the kernel itself and the decompressor define a global symbol
'boot_params' to refer to the boot_params struct, but in the former
case, it refers to the struct directly, whereas in the decompressor, it
refers to a global pointer variable referring to the struct boot_params
passed by the bootloader or constructed from scratch.
This ambiguity is unfortunate, and makes it impossible to assign this
decompressor variable from the x86 EFI stub, given that declaring it as
extern results in a clash. So rename the decompressor version (whose
scope is limited) to boot_params_ptr.
[ mingo: Renamed 'boot_params_p' to 'boot_params_ptr' for clarity ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
|
|
Move the __head section definition to a header to widen its use.
An upcoming patch will mark the code as __head in mem_encrypt_identity.c too.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/0583f57977be184689c373fe540cbd7d85ca2047.1697525407.git.houwenlong.hwl@antgroup.com
|
|
In x86, hardware uses RMID to identify a monitoring group. When a user
creates a monitor group these details are not visible. These details
can help resctrl debugging.
Add RMID(mon_hw_id) to the monitor groups display in the resctrl interface.
Users can see these details when resctrl is mounted with "-o debug" option.
Add RFTYPE_MON_BASE that complements existing RFTYPE_CTRL_BASE and
represents files belonging to monitoring groups.
Other architectures do not use "RMID". Use the name mon_hw_id to refer
to "RMID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/mon_groups/mon_grp1/mon_hw_id
3
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-10-babu.moger@amd.com
|
|
Files unique to monitoring groups have the RFTYPE_MON flag. When a new
monitoring group is created the resctrl files with flags RFTYPE_BASE
(files common to all resource groups) and RFTYPE_MON (files unique to
monitoring groups) are created to support interacting with the new
monitoring group.
A resource group can support both monitoring and control, also termed
a CTRL_MON resource group. CTRL_MON groups should get both monitoring
and control resctrl files but that is not the case. Only the
RFTYPE_BASE and RFTYPE_CTRL files are created for CTRL_MON groups.
Ensure that files with the RFTYPE_MON flag are created for CTRL_MON groups.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-9-babu.moger@amd.com
|
|
In x86, hardware uses CLOSID to identify a control group. When a user
creates a control group this information is not visible to the user. It
can help resctrl debugging.
Add CLOSID(ctrl_hw_id) to the control groups display in the resctrl
interface. Users can see this detail when resctrl is mounted with the
"-o debug" option.
Other architectures do not use "CLOSID". Use the names ctrl_hw_id to refer
to "CLOSID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/ctrl_grp1/ctrl_hw_id
1
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-8-babu.moger@amd.com
|
|
Add "-o debug" option to mount resctrl filesystem in debug mode. When
in debug mode resctrl displays files that have the new RFTYPE_DEBUG flag
to help resctrl debugging.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-7-babu.moger@amd.com
|
|
The default resource group and its files are created during kernel init
time. Upcoming changes will make some resctrl files optional based on
a mount parameter. If optional files are to be added to the default
group based on the mount option, then each new file needs to be created
separately and call kernfs_activate() again.
Create all files of the default resource group during resctrl mount,
destroyed during unmount, to avoid scattering resctrl file addition
across two separate code flows.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-6-babu.moger@amd.com
|