| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The output is inconsistent. Use a proper pr_fmt prefix and split out the
advertisement into a seperate function.
Remove the WARN_ON() in the failure case. It's pointless as we already know
where it failed.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
No point in doing the same calculation over and over. Do it once in
rapl_check_hw_unit().
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
There is no point in having a quirk machinery for a single possible
function. Get rid of it and move the quirk to a place where it actually
makes sense.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Like uncore the rapl driver lacks error handling. It leaks memory and leaves
the hotplug notifier registered.
Add the proper error checks, cleanup the memory and register the hotplug
notifier only on success.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The Knights Landings support added the events and the detection case, but then
returns 0 without actually initializing the driver.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dasaratharaman Chandramouli <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Fixes: 3a2a7797326a4 "perf/x86/intel/rapl: Add support for Knights Landing (KNL)"
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
CQM is a strict per package facility. Use the proper cpumasks to lookup the
readers.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Andi wanted to do this before, but the patch fell down the cracks. Implement
it with the proper error handling.
Requested-by: Andi Kleen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The only missing bit is to completely clear the hardware state on failure
exit. This is now a pretty simple exercise.
Undo the box->init_box() setup on all packages which have been initialized so
far.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Uncore is a per package facility, but the code tries to mimick a per CPU
facility with completely convoluted constructs.
Simplify the whole machinery by tracking per package information. While at it,
avoid the kfree/alloc dance when a CPU goes offline and online again. There is
no point in freeing the box after it was allocated. We just keep proper
refcounting and the first CPU which comes online in a package does the
initialization/activation of the box.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
For per package oriented services we must be able to rely on the number of CPU
packages to be within bounds. Create a tracking facility, which
- calculates the number of possible packages depending on nr_cpu_ids after boot
- makes sure that the package id is within the number of possible packages. If
the apic id is outside we map it to a logical package id if there is enough
space available.
Provide interfaces for drivers to query the mapping and do translations from
physcial to logical ids.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Luis R. Rodriguez <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Toshi Kani <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Store the PMU pointer in event->pmu_private, so we can get rid of the
per CPU data storage.
We keep it after converting to per package data, because a CPU to
package lookup will be 3 loads versus one and these usage sites are
in the perf fast path.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
No users outside of this file.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Clean up the code a bit before reworking it completely.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
When tearing down the boxes nothing undoes the hardware state which was setup
by box->init_box(). Add a box->exit_box() callback and implement it for the
uncores which have an init_box() callback.
This misses the cleanup in the error exit pathes, but I cannot be bothered to
implement it before cleaning up the rest of the driver, which makes that task
way simpler.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The storage array is size limited, but misses a sanity check
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This driver lacks any form of proper error handling. If initialization fails
or hotplug prepare fails, it lets the facility with half initialized stuff
around.
Fix the state and memory leaks in a first step. As a second step we need to
undo the hardware state which is set via uncore_box_init() on some of the
uncore implementations.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
No point in doing partial rollbacks. Robustify uncore_exit_type() so it does
not dereference type->pmus unconditionally and remove all the partial rollback
hackery.
Preparatory patch for proper error handling.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
uncore_cpumask_init() is only ever called from intel_uncore_init() where the
mask is guaranteed to be empty.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Harish Chegondi <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
BDX-DE and BDX-EP share the same uncore code path. But there is no sbox
in BDX-DE. This patch remove SBOX support for BDX-DE.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Battersby <[email protected]>
Cc: Vince Weaver <[email protected]>
Link: http://lkml.kernel.org/r/37D7C6CF3E00A74B8858931C1DB2F0770589D336@SHSMSX103.ccr.corp.intel.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Set HAVE_STACK_VALIDATION to enable stack metadata validation for
x86_64.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bernd Petrovitsch <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chris J Arges <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/cdaeb6914d00a070c0f455cd06989bf3f787a2f6.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
objtool reports the following warning for kretprobe_trampoline():
arch/x86/kernel/kprobes/core.o: warning: objtool: kretprobe_trampoline()+0x20: call without frame pointer save/setup
kretprobes are a special case where the stack is intentionally wrong.
The return address isn't known at the beginning of the trampoline, so
the stack frame can't be set up properly before it calls
trampoline_handler().
Because kretprobe handlers don't sleep, the frame pointer doesn't *have*
to be accurate in the trampoline. So it's ok to tell objtool to ignore
it. This results in no actual changes to the generated code.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bernd Petrovitsch <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chris J Arges <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/7eaf37de52456ff822ffc86b928edb5d48a40ef1.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
objtool reports the following false positive warning:
arch/x86/xen/enlighten.o: warning: objtool: xen_cpuid()+0x41: can't find jump dest instruction at .text+0x108
The warning is due to xen_cpuid()'s use of XEN_EMULATE_PREFIX to insert
some fake instructions which objtool doesn't know how to decode.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bernd Petrovitsch <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chris J Arges <[email protected]>
Cc: David Vrabel <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/bb88399840406629e3417831dc371ecd2842e2a6.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add a new macro, STACK_FRAME_NON_STANDARD(), which is used to denote a
function which does something unusual related to its stack frame. Use
of the macro prevents objtool from emitting a false positive warning.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bernd Petrovitsch <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chris J Arges <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/34487a17b23dba43c50941599d47054a9584b219.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Code which runs outside the kernel's normal mode of operation often does
unusual things which can cause a static analysis tool like objtool to
emit false positive warnings:
- boot image
- vdso image
- relocation
- realmode
- efi
- head
- purgatory
- modpost
Set OBJECT_FILES_NON_STANDARD for their related files and directories,
which will tell objtool to skip checking them. It's ok to skip them
because they don't affect runtime stack traces.
Also skip the following code which does the right thing with respect to
frame pointers, but is too "special" to be validated by a tool:
- entry
- mcount
Also skip the test_nx module because it modifies its exception handling
table at runtime, which objtool can't understand. Fortunately it's
just a test module so it doesn't matter much.
Currently objtool is the only user of OBJECT_FILES_NON_STANDARD, but it
might eventually be useful for other tools.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bernd Petrovitsch <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chris J Arges <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/366c080e3844e8a5b6a0327dc7e8c2b90ca3baeb.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This update contains:
- Hopefully the last ASM CLAC fixups
- A fix for the Quark family related to the IMR lock which makes
kexec work again
- A off-by-one fix in the MPX code. Ironic, isn't it?
- A fix for X86_PAE which addresses once more an unsigned long vs
phys_addr_t hickup"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mpx: Fix off-by-one comparison with nr_registers
x86/mm: Fix slow_virt_to_phys() for X86_PAE again
x86/entry/compat: Add missing CLAC to entry_INT80_32
x86/entry/32: Add an ASM_CLAC to entry_SYSENTER_32
x86/platform/intel/quark: Change the kernel's IMR lock bit to false
|
|
Merge fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <[email protected]>:
dax: move writeback calls into the filesystems
dax: give DAX clearing code correct bdev
ext4: online defrag not supported with DAX
ext2, ext4: only set S_DAX for regular inodes
block: disable block device DAX by default
ocfs2: unlock inode if deleting inode from orphan fails
mm: ASLR: use get_random_long()
drivers: char: random: add get_random_long()
mm: numa: quickly fail allocations for NUMA balancing on full nodes
mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Enumeration:
Revert x86 pcibios_alloc_irq() to fix regression (Bjorn Helgaas)
Marvell MVEBU host bridge driver:
Restrict build to 32-bit ARM (Thierry Reding)"
* tag 'pci-v4.5-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: mvebu: Restrict build to 32-bit ARM
Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"
Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"
Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"
|
|
Replace calls to get_random_int() followed by a cast to (unsigned long)
with calls to get_random_long(). Also address shifting bug which, in
case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits.
Signed-off-by: Daniel Cashman <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Nick Kralevich <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Mark Salyzyn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug.
Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not
v4.3 and bisected it to 991de2e59090. Sunjin reported that the RocketRAID
272x driver worked in v4.2 but not v4.3. In both cases booting with
"pci=routirq" is a workaround.
I think the problem is that after 991de2e59090, we no longer call
pcibios_enable_irq() for upstream bridges. Prior to 991de2e59090, when a
driver called pci_enable_device(), we recursively called
pcibios_enable_irq() for upstream bridges via pci_enable_bridge().
After 991de2e59090, we call pcibios_enable_irq() from pci_device_probe()
instead of the pci_enable_device() path, which does *not* call
pcibios_enable_irq() for upstream bridges.
Revert 991de2e59090 to fix these driver regressions.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Reported-and-tested-by: Олег Мороз <[email protected]>
Reported-by: Sunjin Yang <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
CC: Jiang Liu <[email protected]>
|
|
In the unlikely event that regno == nr_registers then we get an array
overrun on regoff because the invalid register check is currently
off-by-one. Fix this with a check that regno is >= nr_registers instead.
Detected with static analysis using CoverityScan.
Fixes: fcc7ffd67991 "x86, mpx: Decode MPX instruction to get bound violation information"
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Commit 172b2386ed16 ("KVM: x86: fix missed hardware breakpoints",
2016-02-10) worked around a case where the debug registers are not loaded
correctly on preemption and on the first entry to KVM_RUN.
However, Xiao Guangrong pointed out that the root cause must be that
KVM_DEBUGREG_BP_ENABLED is not being set correctly. This can indeed
happen due to the lazy debug exit mechanism, which does not call
kvm_update_dr7. Fix it by replacing the existing loop (more or less
equivalent to kvm_update_dr0123) with calls to all the kvm_update_dr*
functions.
Cc: [email protected] # 4.1+
Fixes: 172b2386ed16a9143d9a456aae5ec87275c61489
Reviewed-by: Xiao Guangrong <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Pull KVM fixes from Paolo Bonzini:
"KVM/ARM fixes:
- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
KVM/x86 fixes:
- Fix ubsan warning
- Fix hardware breakpoints in a guest vs. preempt notifiers
- Fix Hurd
Generic:
- use __GFP_NOWARN together with GFP_NOWAIT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: MMU: fix ubsan index-out-of-range warning
arm64: KVM: vgic-v3: Restore ICH_APR0Rn_EL2 before ICH_APR1Rn_EL2
KVM: async_pf: do not warn on page allocation failures
KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
KVM: x86: fix missed hardware breakpoints
arm/arm64: KVM: Feed initialized memory to MMIO accesses
KVM: arm/arm64: vgic: Ensure bitmaps are long enough
|
|
"d1cd12108346: x86, pageattr: Prevent overflow in slow_virt_to_phys() for
X86_PAE" was unintentionally removed by the recent "34437e67a672: x86/mm: Fix
slow_virt_to_phys() to handle large PAT bit".
And, the variable 'phys_addr' was defined as "unsigned long" by mistake -- it should
be "phys_addr_t".
As a result, Hyper-V network driver in 32-PAE Linux guest can't work again.
Fixes: commit 34437e67a672: "x86/mm: Fix slow_virt_to_phys() to handle large PAT bit"
Signed-off-by: Dexuan Cui <[email protected]>
Reviewed-by: Toshi Kani <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Andrew Morton <[email protected]>
Cc: K. Y. Srinivasan <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
The problem:
On -rt, an emulated LAPIC timer instances has the following path:
1) hard interrupt
2) ksoftirqd is scheduled
3) ksoftirqd wakes up vcpu thread
4) vcpu thread is scheduled
This extra context switch introduces unnecessary latency in the
LAPIC path for a KVM guest.
The solution:
Allow waking up vcpu thread from hardirq context,
thus avoiding the need for ksoftirqd to be scheduled.
Normal waitqueues make use of spinlocks, which on -RT
are sleepable locks. Therefore, waking up a waitqueue
waiter involves locking a sleeping lock, which
is not allowed from hard interrupt context.
cyclictest command line:
This patch reduces the average latency in my tests from 14us to 11us.
Daniel writes:
Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency
benchmark on mainline. The test was run 1000 times on
tip/sched/core 4.4.0-rc8-01134-g0905f04:
./x86-run x86/tscdeadline_latency.flat -cpu host
with idle=poll.
The test seems not to deliver really stable numbers though most of
them are smaller. Paolo write:
"Anything above ~10000 cycles means that the host went to C1 or
lower---the number means more or less nothing in that case.
The mean shows an improvement indeed."
Before:
min max mean std
count 1000.000000 1000.000000 1000.000000 1000.000000
mean 5162.596000 2019270.084000 5824.491541 20681.645558
std 75.431231 622607.723969 89.575700 6492.272062
min 4466.000000 23928.000000 5537.926500 585.864966
25% 5163.000000 1613252.750000 5790.132275 16683.745433
50% 5175.000000 2281919.000000 5834.654000 23151.990026
75% 5190.000000 2382865.750000 5861.412950 24148.206168
max 5228.000000 4175158.000000 6254.827300 46481.048691
After
min max mean std
count 1000.000000 1000.00000 1000.000000 1000.000000
mean 5143.511000 2076886.10300 5813.312474 21207.357565
std 77.668322 610413.09583 86.541500 6331.915127
min 4427.000000 25103.00000 5529.756600 559.187707
25% 5148.000000 1691272.75000 5784.889825 17473.518244
50% 5160.000000 2308328.50000 5832.025000 23464.837068
75% 5172.000000 2393037.75000 5853.177675 24223.969976
max 5222.000000 3922458.00000 6186.720500 42520.379830
[Patch was originaly based on the swait implementation found in the -rt
tree. Daniel ported it to mainline's version and gathered the
benchmark numbers for tscdeadline_latency test.]
Signed-off-by: Daniel Wagner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Boqun Feng <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Paul Gortmaker <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
set_memory_nx() (and set_memory_x()) currently differ in behavior from
all other set_memory_*() functions when encountering a virtual address
space hole within the kernel address range: They stop processing at the
hole, but nevertheless report success (making the caller believe the
operation was carried out on the entire range). While observed to be a
problem - triggering the CONFIG_DEBUG_WX warning - only with out of
tree code, I suspect (but didn't check) that on x86-64 the
CONFIG_DEBUG_PAGEALLOC logic in free_init_pages() would, when called
from free_initmem(), have the same effect on the set_memory_nx() called
from mark_rodata_ro().
This unexpected behavior is a result of change_page_attr_set_clr()
special casing changes to only the NX bit, in that it passes "false" as
the "checkalias" argument to __change_page_attr_set_clr(). Since this
flag becomes the "primary" argument of both __change_page_attr() and
__cpa_process_fault(), the latter would so far return success without
adjusting cpa->numpages. Success to the higher level callers, however,
means that whatever cpa->numpages currently holds is the count of
successfully processed pages. The cases when __change_page_attr() calls
__cpa_process_fault(), otoh, don't generally mean the entire range got
processed (as can be seen from one of the two success return paths in
__cpa_process_fault() already adjusting ->numpages).
Signed-off-by: Jan Beulich <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
arch/x86/include/asm/hw_irq.h contains declarations for the C-level handlers
called into directly from the IDT-referenced assembly stubs. These
declarations are never used as they are referenced from assembly only.
Furthermore, these declarations got their attributes wrong: there is no
'__irqentry' (parameter passing via stack) attached to them.
Also, the list of declarations isn't complete: none of the tracing-capable
variants is declared, for example.
Purge the handler declarations.
Signed-off-by: Nicolai Stange <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Ubsan reports the following warning due to a typo in
update_accessed_dirty_bits template, the patch fixes
the typo:
[ 168.791851] ================================================================================
[ 168.791862] UBSAN: Undefined behaviour in arch/x86/kvm/paging_tmpl.h:252:15
[ 168.791866] index 4 is out of range for type 'u64 [4]'
[ 168.791871] CPU: 0 PID: 2950 Comm: qemu-system-x86 Tainted: G O L 4.5.0-rc5-next-20160222 #7
[ 168.791873] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013
[ 168.791876] 0000000000000000 ffff8801cfcaf208 ffffffff81c9f780 0000000041b58ab3
[ 168.791882] ffffffff82eb2cc1 ffffffff81c9f6b4 ffff8801cfcaf230 ffff8801cfcaf1e0
[ 168.791886] 0000000000000004 0000000000000001 0000000000000000 ffffffffa1981600
[ 168.791891] Call Trace:
[ 168.791899] [<ffffffff81c9f780>] dump_stack+0xcc/0x12c
[ 168.791904] [<ffffffff81c9f6b4>] ? _atomic_dec_and_lock+0xc4/0xc4
[ 168.791910] [<ffffffff81da9e81>] ubsan_epilogue+0xd/0x8a
[ 168.791914] [<ffffffff81daafa2>] __ubsan_handle_out_of_bounds+0x15c/0x1a3
[ 168.791918] [<ffffffff81daae46>] ? __ubsan_handle_shift_out_of_bounds+0x2bd/0x2bd
[ 168.791922] [<ffffffff811287ef>] ? get_user_pages_fast+0x2bf/0x360
[ 168.791954] [<ffffffffa1794050>] ? kvm_largepages_enabled+0x30/0x30 [kvm]
[ 168.791958] [<ffffffff81128530>] ? __get_user_pages_fast+0x360/0x360
[ 168.791987] [<ffffffffa181b818>] paging64_walk_addr_generic+0x1b28/0x2600 [kvm]
[ 168.792014] [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[ 168.792019] [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[ 168.792044] [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[ 168.792076] [<ffffffffa181c36d>] paging64_gva_to_gpa+0x7d/0x110 [kvm]
[ 168.792121] [<ffffffffa181c2f0>] ? paging64_walk_addr_generic+0x2600/0x2600 [kvm]
[ 168.792130] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[ 168.792178] [<ffffffffa17d9a4a>] emulator_read_write_onepage+0x27a/0x1150 [kvm]
[ 168.792208] [<ffffffffa1794d44>] ? __kvm_read_guest_page+0x54/0x70 [kvm]
[ 168.792234] [<ffffffffa17d97d0>] ? kvm_task_switch+0x160/0x160 [kvm]
[ 168.792238] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[ 168.792263] [<ffffffffa17daa07>] emulator_read_write+0xe7/0x6d0 [kvm]
[ 168.792290] [<ffffffffa183b620>] ? em_cr_write+0x230/0x230 [kvm]
[ 168.792314] [<ffffffffa17db005>] emulator_write_emulated+0x15/0x20 [kvm]
[ 168.792340] [<ffffffffa18465f8>] segmented_write+0xf8/0x130 [kvm]
[ 168.792367] [<ffffffffa1846500>] ? em_lgdt+0x20/0x20 [kvm]
[ 168.792374] [<ffffffffa14db512>] ? vmx_read_guest_seg_ar+0x42/0x1e0 [kvm_intel]
[ 168.792400] [<ffffffffa1846d82>] writeback+0x3f2/0x700 [kvm]
[ 168.792424] [<ffffffffa1846990>] ? em_sidt+0xa0/0xa0 [kvm]
[ 168.792449] [<ffffffffa185554d>] ? x86_decode_insn+0x1b3d/0x4f70 [kvm]
[ 168.792474] [<ffffffffa1859032>] x86_emulate_insn+0x572/0x3010 [kvm]
[ 168.792499] [<ffffffffa17e71dd>] x86_emulate_instruction+0x3bd/0x2110 [kvm]
[ 168.792524] [<ffffffffa17e6e20>] ? reexecute_instruction.part.110+0x2e0/0x2e0 [kvm]
[ 168.792532] [<ffffffffa14e9a81>] handle_ept_misconfig+0x61/0x460 [kvm_intel]
[ 168.792539] [<ffffffffa14e9a20>] ? handle_pause+0x450/0x450 [kvm_intel]
[ 168.792546] [<ffffffffa15130ea>] vmx_handle_exit+0xd6a/0x1ad0 [kvm_intel]
[ 168.792572] [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[ 168.792597] [<ffffffffa17f6bcd>] kvm_arch_vcpu_ioctl_run+0xd3d/0x6090 [kvm]
[ 168.792621] [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[ 168.792627] [<ffffffff8293b530>] ? __ww_mutex_lock_interruptible+0x1630/0x1630
[ 168.792651] [<ffffffffa17f5e90>] ? kvm_arch_vcpu_runnable+0x4f0/0x4f0 [kvm]
[ 168.792656] [<ffffffff811eeb30>] ? preempt_notifier_unregister+0x190/0x190
[ 168.792681] [<ffffffffa17e0447>] ? kvm_arch_vcpu_load+0x127/0x650 [kvm]
[ 168.792704] [<ffffffffa178e9a3>] kvm_vcpu_ioctl+0x553/0xda0 [kvm]
[ 168.792727] [<ffffffffa178e450>] ? vcpu_put+0x40/0x40 [kvm]
[ 168.792732] [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[ 168.792735] [<ffffffff82946087>] ? _raw_spin_unlock+0x27/0x40
[ 168.792740] [<ffffffff8163a943>] ? handle_mm_fault+0x1673/0x2e40
[ 168.792744] [<ffffffff8129daa8>] ? trace_hardirqs_on_caller+0x478/0x6c0
[ 168.792747] [<ffffffff8129dcfd>] ? trace_hardirqs_on+0xd/0x10
[ 168.792751] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[ 168.792756] [<ffffffff81725a80>] do_vfs_ioctl+0x1b0/0x12b0
[ 168.792759] [<ffffffff817258d0>] ? ioctl_preallocate+0x210/0x210
[ 168.792763] [<ffffffff8174aef3>] ? __fget+0x273/0x4a0
[ 168.792766] [<ffffffff8174acd0>] ? __fget+0x50/0x4a0
[ 168.792770] [<ffffffff8174b1f6>] ? __fget_light+0x96/0x2b0
[ 168.792773] [<ffffffff81726bf9>] SyS_ioctl+0x79/0x90
[ 168.792777] [<ffffffff82946880>] entry_SYSCALL_64_fastpath+0x23/0xc1
[ 168.792780] ================================================================================
Signed-off-by: Mike Krinkin <[email protected]>
Reviewed-by: Xiao Guangrong <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
table format
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This doesn't seem to fix a regression -- I don't think the CLAC was
ever there.
I double-checked in a debugger: entries through the int80 gate do
not automatically clear AC.
Stable maintainers: I can provide a backport to 4.3 and earlier if
needed. This needs to be backported all the way to 3.10.
Reported-by: Brian Gerst <[email protected]>
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: <[email protected]> # v3.10 and later
Fixes: 63bcff2a307b ("x86, smap: Add STAC and CLAC instructions to control user space access")
Link: http://lkml.kernel.org/r/b02b7e71ae54074be01fc171cbd4b72517055c0e.1456345086.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Before we can move the command line processing before the allocation
of the kernel, which is required for detecting the 'nokaslr' option
which controls that allocation, move the converted command line higher
up in memory, to prevent it from interfering with the kernel itself.
Since x86 needs the address to fit in 32 bits, use UINT_MAX as the upper
bound there. Otherwise, use ULONG_MAX (i.e., no limit)
Reviewed-by: Matt Fleming <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Commit e8dd2d2d641c ("Silence compiler warning in arch/x86/kvm/emulate.c",
2015-09-06) broke boot of the Hurd. The bug is that the "default:"
case actually could modify "la", but after the patch this change is
not reflected in *linear.
The bug is visible whenever a non-zero segment base causes the linear
address to wrap around the 4GB mark.
Fixes: e8dd2d2d641cb2724ee10e76c0ad02e04289c017
Cc: [email protected]
Reported-by: Aurelien Jarno <[email protected]>
Tested-by: Aurelien Jarno <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Sometimes when setting a breakpoint a process doesn't stop on it.
This is because the debug registers are not loaded correctly on
VCPU load.
The following simple reproducer from Oleg Nesterov tries using debug
registers in two threads. To see the bug, run a 2-VCPU guest with
"taskset -c 0" and run "./bp 0 1" inside the guest.
#include <unistd.h>
#include <signal.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/wait.h>
#include <sys/ptrace.h>
#include <sys/user.h>
#include <asm/debugreg.h>
#include <assert.h>
#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len)
{
unsigned long dr7;
dr7 = ((len | type) & 0xf)
<< (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
if (enable)
dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));
return dr7;
}
int write_dr(int pid, int dr, unsigned long val)
{
return ptrace(PTRACE_POKEUSER, pid,
offsetof (struct user, u_debugreg[dr]),
val);
}
void set_bp(pid_t pid, void *addr)
{
unsigned long dr7;
assert(write_dr(pid, 0, (long)addr) == 0);
dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1);
assert(write_dr(pid, 7, dr7) == 0);
}
void *get_rip(int pid)
{
return (void*)ptrace(PTRACE_PEEKUSER, pid,
offsetof(struct user, regs.rip), 0);
}
void test(int nr)
{
void *bp_addr = &&label + nr, *bp_hit;
int pid;
printf("test bp %d\n", nr);
assert(nr < 16); // see 16 asm nops below
pid = fork();
if (!pid) {
assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
kill(getpid(), SIGSTOP);
for (;;) {
label: asm (
"nop; nop; nop; nop;"
"nop; nop; nop; nop;"
"nop; nop; nop; nop;"
"nop; nop; nop; nop;"
);
}
}
assert(pid == wait(NULL));
set_bp(pid, bp_addr);
for (;;) {
assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0);
assert(pid == wait(NULL));
bp_hit = get_rip(pid);
if (bp_hit != bp_addr)
fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n",
bp_hit - &&label, nr);
}
}
int main(int argc, const char *argv[])
{
while (--argc) {
int nr = atoi(*++argv);
if (!fork())
test(nr);
}
while (wait(NULL) > 0)
;
return 0;
}
Cc: [email protected]
Suggested-by: Nadav Amit <[email protected]>
Reported-by: Andrey Wagin <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Signed-off-by: Adam Buchbinder <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Both before and after 5f310f739b4c ("x86/entry/32: Re-implement
SYSENTER using the new C path"), we relied on a uaccess very early
in the SYSENTER path to clear AC. After that change, though, we can
potentially make it all the way into C code with AC set, which
enlarges the attack surface for SMAP bypass by doing SYSENTER with
AC set.
Strengthen the SMAP protection by addding the missing ASM_CLAC right
at the beginning.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/3e36be110724896e32a4a1fe73bacb349d3cba94.1456262295.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
If __preempt_schedule() or __preempt_schedule_notrace() is referenced at
the beginning of a function, gcc can insert the asm inline "call
___preempt_schedule[_notrace]" instruction before setting up a stack
frame, which breaks frame pointer convention if CONFIG_FRAME_POINTER is
enabled and can result in bad stack traces.
Force a stack frame to be created if CONFIG_FRAME_POINTER is enabled by
listing the stack pointer as an output operand for the inline asm
statements.
Specifically this fixes the following stacktool warnings:
stacktool: drivers/scsi/hpsa.o: hpsa_scsi_do_simple_cmd.constprop.106()+0x79: call without frame pointer save/setup
stacktool: fs/mbcache.o: mb_cache_entry_find_first()+0x70: call without frame pointer save/setup
stacktool: fs/mbcache.o: mb_cache_entry_find_first()+0x92: call without frame pointer save/setup
stacktool: fs/mbcache.o: mb_cache_entry_free()+0xff: call without frame pointer save/setup
stacktool: fs/mbcache.o: mb_cache_entry_free()+0xf5: call without frame pointer save/setup
stacktool: fs/mbcache.o: mb_cache_entry_free()+0x11a: call without frame pointer save/setup
stacktool: fs/mbcache.o: mb_cache_entry_get()+0x225: call without frame pointer save/setup
stacktool: kernel/locking/percpu-rwsem.o: percpu_up_read()+0x27: call without frame pointer save/setup
stacktool: kernel/profile.o: do_profile_hits.isra.5()+0x139: call without frame pointer save/setup
stacktool: lib/nmi_backtrace.o: nmi_trigger_all_cpu_backtrace()+0x2b6: call without frame pointer save/setup
stacktool: net/rds/ib_cm.o: rds_ib_cq_comp_handler_recv()+0x58: call without frame pointer save/setup
stacktool: net/rds/ib_cm.o: rds_ib_cq_comp_handler_send()+0x58: call without frame pointer save/setup
stacktool: net/rds/ib_recv.o: rds_ib_attempt_ack()+0xc1: call without frame pointer save/setup
stacktool: net/rds/iw_recv.o: rds_iw_attempt_ack()+0xc1: call without frame pointer save/setup
stacktool: net/rds/iw_recv.o: rds_iw_recv_cq_comp_handler()+0x55: call without frame pointer save/setup
So it only adds a stack frame to 15 call sites out of ~5000 calls to
___preempt_schedule[_notrace](). All the others already had stack frames.
Oddly, this change actually seems to make things faster in a lot of
cases. For many smaller functions it causes the stack frame creation to
get moved out of the common path and into the unlikely path.
For example, here's the original cyc2ns_read_end():
ffffffff8101f8c0 <cyc2ns_read_end>:
ffffffff8101f8c0: 55 push %rbp
ffffffff8101f8c1: 48 89 e5 mov %rsp,%rbp
ffffffff8101f8c4: 83 6f 10 01 subl $0x1,0x10(%rdi)
ffffffff8101f8c8: 75 08 jne ffffffff8101f8d2 <cyc2ns_read_end+0x12>
ffffffff8101f8ca: 65 48 89 3d e6 5a ff mov %rdi,%gs:0x7eff5ae6(%rip) # 153b8 <cyc2ns+0x38>
ffffffff8101f8d1: 7e
ffffffff8101f8d2: 65 ff 0d 77 c4 fe 7e decl %gs:0x7efec477(%rip) # bd50 <__preempt_count>
ffffffff8101f8d9: 74 02 je ffffffff8101f8dd <cyc2ns_read_end+0x1d>
ffffffff8101f8db: 5d pop %rbp
ffffffff8101f8dc: c3 retq
ffffffff8101f8dd: e8 1e 37 fe ff callq ffffffff81003000 <___preempt_schedule>
ffffffff8101f8e2: 5d pop %rbp
ffffffff8101f8e3: c3 retq
ffffffff8101f8e4: 66 66 66 2e 0f 1f 84 data16 data16 nopw %cs:0x0(%rax,%rax,1)
ffffffff8101f8eb: 00 00 00 00 00
And here's the same function with the patch:
ffffffff8101f8c0 <cyc2ns_read_end>:
ffffffff8101f8c0: 83 6f 10 01 subl $0x1,0x10(%rdi)
ffffffff8101f8c4: 75 08 jne ffffffff8101f8ce <cyc2ns_read_end+0xe>
ffffffff8101f8c6: 65 48 89 3d ea 5a ff mov %rdi,%gs:0x7eff5aea(%rip) # 153b8 <cyc2ns+0x38>
ffffffff8101f8cd: 7e
ffffffff8101f8ce: 65 ff 0d 7b c4 fe 7e decl %gs:0x7efec47b(%rip) # bd50 <__preempt_count>
ffffffff8101f8d5: 74 01 je ffffffff8101f8d8 <cyc2ns_read_end+0x18>
ffffffff8101f8d7: c3 retq
ffffffff8101f8d8: 55 push %rbp
ffffffff8101f8d9: 48 89 e5 mov %rsp,%rbp
ffffffff8101f8dc: e8 1f 37 fe ff callq ffffffff81003000 <___preempt_schedule>
ffffffff8101f8e1: 5d pop %rbp
ffffffff8101f8e2: c3 retq
ffffffff8101f8e3: 66 66 66 66 2e 0f 1f data16 data16 data16 nopw %cs:0x0(%rax,%rax,1)
ffffffff8101f8ea: 84 00 00 00 00 00
Notice that it moved the frame pointer setup code to the unlikely
___preempt_schedule() call path. Going through a sampling of the
differences in the asm, that's the most common change I see.
Otherwise it has no real effect on callers which already have stack
frames (though it does result in the reordering of some 'mov's).
Reported-by: Jiri Slaby <[email protected]>
Tested-by: Jiri Slaby <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Stacktool generates the following warning:
stacktool: arch/x86/kvm/vmx.o: vmx_handle_external_intr()+0x67: call without frame pointer save/setup
By adding the stackpointer as an output operand, this patch ensures that a
stack frame is created when CONFIG_FRAME_POINTER is enabled for the inline
assmebly statement.
Signed-off-by: Chris J Arges <[email protected]>
Reviewed-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The assembly PV_UNLOCK function is a callable non-leaf function which
doesn't honor CONFIG_FRAME_POINTER, which can result in bad stack
traces.
Create a stack frame when CONFIG_FRAME_POINTER is enabled.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bernd Petrovitsch <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Chris J Arges <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/6685a72ddbbd0ad3694337cca0af4b4ea09f5f40.1453405861.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
With some configs (including allyesconfig), gcc doesn't inline
test_cc(). When that happens, test_cc() doesn't create a stack frame
before inserting the inline asm call instruction. This breaks frame
pointer convention if CONFIG_FRAME_POINTER is enabled and can result in
a bad stack trace.
Force it to always be inlined so that its containing function's stack
frame can be used.
Suggested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bernd Petrovitsch <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Chris J Arges <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: Gleb Natapov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|