| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"These are the fixes left over from the v5.4 cycle:
- Various low level 32-bit entry code fixes and improvements by Andy
Lutomirski, Peter Zijlstra and Thomas Gleixner.
- Fix 32-bit Xen PV breakage, by Jan Beulich"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3
x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise
selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel
selftests/x86/mov_ss_trap: Fix the SYSENTER test
x86/entry/32: Fix NMI vs ESPFIX
x86/entry/32: Unwind the ESPFIX stack earlier on exception entry
x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL
x86/entry/32: Use %ss segment where required
x86/entry/32: Fix IRET exception
x86/cpu_entry_area: Add guard page for entry stack on 32bit
x86/pti/32: Size initial_page_table correctly
x86/doublefault/32: Fix stack canaries in the double fault handler
x86/xen/32: Simplify ring check in xen_iret_crit_fixup()
x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout
x86/stackframe/32: Repair 32-bit Xen PV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
|
|
This can be had with two instead of six insns, by just checking the high
CS.RPL bit.
Also adjust the comment - there would be no #GP in the mentioned cases, as
there's no segment limit violation or alike. Instead there'd be #PF, but
that one reports the target EIP of said branch, not the address of the
branch insn itself.
Signed-off-by: Jan Beulich <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Now that SS:ESP always get saved by SAVE_ALL, this also needs to be
accounted for in xen_iret_crit_fixup(). Otherwise the old_ax value gets
interpreted as EFLAGS, and hence VM86 mode appears to be active all the
time, leading to random "vm86_32: no user_vm86: BAD" log messages alongside
processes randomly crashing.
Since following the previous model (sitting after SAVE_ALL) would further
complicate the code _and_ retain the dependency of xen_iret_crit_fixup() on
frame manipulations done by entry_32.S, switch things around and do the
adjustment ahead of SAVE_ALL.
Fixes: 3c88c692c287 ("x86/stackframe/32: Provide consistent pt_regs")
Signed-off-by: Jan Beulich <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Cc: Stable Team <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The IOPL emulation via the I/O bitmap is sufficient. Remove the legacy
cruft dealing with the (e)flags based IOPL mechanism.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Juergen Gross <[email protected]> (Paravirt and Xen parts)
Acked-by: Andy Lutomirski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixlet from Juergen Gross:
"Just one patch for issuing a deprecation warning for 32-bit Xen pv
guests"
* tag 'for-linus-5.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: issue deprecation warning for 32-bit pv guest
|
|
Support for the kernel as Xen 32-bit PV guest will soon be removed.
Issue a warning when booted as such.
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/[email protected]
To: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Robert Richter <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
|
|
All these are functions which are invoked from elsewhere but they are
not typical C functions. So annotate them using the new SYM_CODE_START.
All these were not balanced with any END, so mark their ends by
SYM_CODE_END, appropriately.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]> [xen bits]
Reviewed-by: Rafael J. Wysocki <[email protected]> [hibernate]
Cc: Andy Lutomirski <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Len Brown <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Pavel Machek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Pingfan Liu <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: "Steven Rostedt (VMware)" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
These are all functions which are invoked from elsewhere, so annotate
them as global using the new SYM_FUNC_START and their ENDPROC's by
SYM_FUNC_END.
Make sure ENTRY/ENDPROC is not defined on X86_64, given these were the
last users.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]> [hibernate]
Reviewed-by: Boris Ostrovsky <[email protected]> [xen bits]
Acked-by: Herbert Xu <[email protected]> [crypto]
Cc: Allison Randal <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Armijn Hemel <[email protected]>
Cc: Cao jin <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Enrico Weigelt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jim Mattson <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: kvm ML <[email protected]>
Cc: Len Brown <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: linux-efi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Mark Rutland <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: "Radim Krčmář" <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: "Steven Rostedt (VMware)" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: Wei Huang <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Cc: Xiaoyao Li <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Change all assembly code which is marked using END (and not ENDPROC).
Switch all these to the appropriate new annotation SYM_CODE_START and
SYM_CODE_END.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]> [xen bits]
Cc: Andy Lutomirski <[email protected]>
Cc: Cao jin <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: [email protected]
Cc: Maran Wilson <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: "Steven Rostedt (VMware)" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
All these are functions which are invoked from elsewhere but they are
not typical C functions. So annotate them using the new SYM_CODE_START.
All these were not balanced with any END, so mark their ends by
SYM_CODE_END appropriately too.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]> [xen bits]
Acked-by: Rafael J. Wysocki <[email protected]> [power mgmt]
Cc: Andy Shevchenko <[email protected]>
Cc: Cao jin <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Pavel Machek <[email protected]>
Cc: Pingfan Liu <[email protected]>
Cc: [email protected]
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wei Huang <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Cc: Xiaoyao Li <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
_key_expansion_128 is an alias to _key_expansion_256a, __memcpy to
memcpy, xen_syscall32_target to xen_sysenter_target, and so on. Annotate
them all using the new SYM_FUNC_START_ALIAS, SYM_FUNC_START_LOCAL_ALIAS,
and SYM_FUNC_END_ALIAS. This will make the tools generating the
debuginfo happy as it avoids nesting and double symbols.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Juergen Gross <[email protected]> [xen parts]
Cc: Boris Ostrovsky <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Peter Zijlstra <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- correct panic handling when running as a Xen guest
- cleanup the Xen grant driver to remove printing a pointer being
always NULL
- remove a soon to be wrong call of of_dma_configure()
* tag 'for-linus-5.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Stop abusing DT of_dma_configure API
xen/grant-table: remove unnecessary printing
x86/xen: Return from panic notifier
|
|
Currently execution of panic() continues until Xen's panic notifier
(xen_panic_event()) is called at which point we make a hypercall that
never returns.
This means that any notifier that is supposed to be called later as
well as significant part of panic() code (such as pstore writes from
kmsg_dump()) is never executed.
There is no reason for xen_panic_event() to be this last point in
execution since panic()'s emergency_restart() will call into
xen_emergency_restart() from where we can perform our hypercall.
Nevertheless, we will provide xen_legacy_crash boot option that will
preserve original behavior during crash. This option could be used,
for example, if running kernel dumper (which happens after panic
notifiers) is undesirable.
Reported-by: James Dingwall <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes and cleanups from Juergen Gross:
- a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some
cases, plus a follow-on cleanup series for that driver
- a patch for introducing non-blocking EFI callbacks in Xen's EFI
driver, plu a cleanup patch for Xen EFI handling merging the x86 and
ARM arch specific initialization into the Xen EFI driver
- a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning
up after a user process has died
- a fix for Xen on ARM after removal of ZONE_DMA
- a cleanup patch for avoiding build warnings for Xen on ARM
* tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix self-deadlock after killing user process
xen/efi: have a common runtime setup function
arm: xen: mm: use __GPF_DMA32 for arm64
xen/balloon: Clear PG_offline in balloon_retrieve()
xen/balloon: Mark pages PG_offline in balloon_append()
xen/balloon: Drop __balloon_append()
xen/balloon: Set pages PageOffline() in balloon_add_region()
ARM: xen: unexport HYPERVISOR_platform_op function
xen/efi: Set nonblocking callbacks
|
|
Today the EFI runtime functions are setup in architecture specific
code (x86 and arm), with the functions themselves living in drivers/xen
as they are not architecture dependent.
As the setup is exactly the same for arm and x86 move the setup to
drivers/xen, too. This at once removes the need to make the single
functions global visible.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
[boris: "Dropped EXPORT_SYMBOL_GPL(xen_efi_runtime_setup)"]
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
Other parts of the kernel expect these nonblocking EFI callbacks to
exist and crash when running under Xen. Since the implementations of
xen_efi_set_variable() and xen_efi_query_variable_info() do not take any
locks, use them for the nonblocking callbacks too.
Signed-off-by: Ross Lagerwall <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- add dma-mapping and block layer helpers to take care of IOMMU merging
for mmc plus subsequent fixups (Yoshihiro Shimoda)
- rework handling of the pgprot bits for remapping (me)
- take care of the dma direct infrastructure for swiotlb-xen (me)
- improve the dma noncoherent remapping infrastructure (me)
- better defaults for ->mmap, ->get_sgtable and ->get_required_mask
(me)
- cleanup mmaping of coherent DMA allocations (me)
- various misc cleanups (Andy Shevchenko, me)
* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
mmc: queue: Fix bigger segments usage
arm64: use asm-generic/dma-mapping.h
swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
swiotlb-xen: simplify cache maintainance
swiotlb-xen: use the same foreign page check everywhere
swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
xen: remove the exports for xen_{create,destroy}_contiguous_region
xen/arm: remove xen_dma_ops
xen/arm: simplify dma_cache_maint
xen/arm: use dev_is_dma_coherent
xen/arm: consolidate page-coherent.h
xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
arm: remove wrappers for the generic dma remap helpers
dma-mapping: introduce a dma_common_find_pages helper
dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
vmalloc: lift the arm flag for coherent mappings to common code
dma-mapping: provide a better default ->get_required_mask
dma-mapping: remove the dma_declare_coherent_memory export
remoteproc: don't allow modular build
...
|
|
These routines are only used by swiotlb-xen, which cannot be modular.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
|
|
There is a lot of infrastructure for functionality which is used
exclusively in __{save,restore}_processor_state() on the suspend/resume
path.
cr8 is an alias of APIC_TASKPRI, and APIC_TASKPRI is saved/restored by
lapic_{suspend,resume}(). Saving and restoring cr8 independently of the
rest of the Local APIC state isn't a clever thing to be doing.
Delete the suspend/resume cr8 handling, which shrinks the size of struct
saved_context, and allows for the removal of both PVOPS.
Signed-off-by: Andrew Cooper <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 specific fixes and updates:
- The CR2 corruption fixes which store CR2 early in the entry code
and hand the stored address to the fault handlers.
- Revert a forgotten leftover of the dropped FSGSBASE series.
- Plug a memory leak in the boot code.
- Make the Hyper-V assist functionality robust by zeroing the shadow
page.
- Remove a useless check for dead processes with LDT
- Update paravirt and VMware maintainers entries.
- A few cleanup patches addressing various compiler warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Prevent clobbering of saved CR2 value
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
x86, boot: Remove multiple copy of static function sanitize_boot_params()
x86/boot/compressed/64: Remove unused variable
x86/boot/efi: Remove unused variables
x86/mm, tracing: Fix CR2 corruption
x86/entry/64: Update comments and sanity tests for create_gap
x86/entry/64: Simplify idtentry a little
x86/entry/32: Simplify common_exception
x86/paravirt: Make read_cr2() CALLEE_SAVE
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
x86/process: Delete useless check for dead process with LDT
x86: math-emu: Hide clang warnings for 16-bit overflow
x86/e820: Use proper booleans instead of 0/1
x86/apic: Silence -Wtype-limits compiler warnings
x86/mm: Free sme_early_buffer after init
x86/boot: Fix memory leak in default_get_smp_config()
Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
|
|
The one paravirt read_cr2() implementation (Xen) is actually quite trivial
and doesn't need to clobber anything other than the return register.
Making read_cr2() CALLEE_SAVE avoids all the PUSH/POP nonsense and allows
more convenient use from assembly.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
Commit 7457c0da024b ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.
This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:
[ 0.772876] general protection fault: 0000 [#1] SMP NOPTI
[ 0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[ 0.772893] RIP: e030:int3_magic+0x0/0x7
[ 0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246
[ 0.773334] Call Trace:
[ 0.773334] alternative_instructions+0x3d/0x12e
[ 0.773334] check_bugs+0x7c9/0x887
[ 0.773334] ? __get_locked_pte+0x178/0x1f0
[ 0.773334] start_kernel+0x4ff/0x535
[ 0.773334] ? set_init_arg+0x55/0x55
[ 0.773334] xen_start_kernel+0x571/0x57a
For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.
E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
pop %rcx;
pop %r11;
jmp xenint3
As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Andrew Cooper <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
PVH guest needs PV extentions to work, so "nopv" parameter should be
ignored for PVH but not for HVM guest.
If PVH guest boots up via the Xen-PVH boot entry, xen_pvh is set early,
we know it's PVH guest and ignore "nopv" parameter directly.
If PVH guest boots up via the normal boot entry same as HVM guest, it's
hard to distinguish PVH and HVM guest at that time. In this case, we
have to panic early if PVH is detected and nopv is enabled to avoid a
worse situation later.
Remove static from bool_x86_init_noop/x86_op_int_noop so they could be
used globally. Move xen_platform_hvm() after xen_hvm_guest_late_init()
to avoid compile error.
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
.. as "nopv" support needs it to be changeable at boot up stage.
Checkpatch reports warning, so move variable declarations from
hypervisor.c to hypervisor.h
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Clean up unnecessory code after that operation.
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
In virtualization environment, PV extensions (drivers, interrupts,
timers, etc) are enabled in the majority of use cases which is the
best option.
However, in some cases (kexec not fully working, benchmarking)
we want to disable PV extensions. We have "xen_nopv" for that purpose
but only for XEN. For a consistent admin experience a common command
line parameter "nopv" set across all PV guest implementations is a
better choice.
There are guest types which just won't work without PV extensions,
like Xen PV, Xen PVH and jailhouse. add a "ignore_nopv" member to
struct hypervisor_x86 set to true for those guest types and call
the detect functions only if nopv is false or ignore_nopv is true.
Suggested-by: Juergen Gross <[email protected]>
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Jan Kiszka <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
.. as they are only called at early bootup stage. In fact, other
functions in x86_hyper_xen_hvm.init.* are all marked as __init.
Unexport xen_hvm_need_lapic as it's never used outside.
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
initialized"
This reverts commit ca5d376e17072c1b60c3fee66f3be58ef018952d.
Commit 8990cac6e5ea ("x86/jump_label: Initialize static branching
early") adds jump_label_init() call in setup_arch() to make static
keys initialized early, so we could use the original simpler code
again.
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
|
|
Drop the pgtable_t variable from all implementation for pte_fn_t as none
of them use it. apply_to_pte_range() should stop computing it as well.
Should help us save some cycles.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Anshuman Khandual <[email protected]>
Acked-by: Matthew Wilcox <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: <[email protected]>
Cc: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The pinning of sensitive CR0 and CR4 bits caused a boot crash when loading
the kvm_intel module on a kernel compiled with CONFIG_PARAVIRT=n.
The reason is that the static key which controls the pinning is marked RO
after init. The kvm_intel module contains a CR4 write which requires to
update the static key entry list. That obviously does not work when the key
is in a RO section.
With CONFIG_PARAVIRT enabled this does not happen because the CR4 write
uses the paravirt indirection and the actual write function is built in.
As the key is intended to be immutable after init, move
native_write_cr0/4() out of line.
While at it consolidate the update of the cr4 shadow variable and store the
value right away when the pinning is initialized on a booting CPU. No point
in reading it back 20 instructions later. This allows to confine the static
key and the pinning variable to cpu/common and allows to mark them static.
Fixes: 8dbec27a242c ("x86/asm: Pin sensitive CR0 bits")
Fixes: 873d50d58f67 ("x86/asm: Pin sensitive CR4 bits")
Reported-by: Linus Torvalds <[email protected]>
Reported-by: Xi Ruoyao <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Xi Ruoyao <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 topology updates from Ingo Molnar:
"Implement multi-die topology support on Intel CPUs and expose the die
topology to user-space tooling, by Len Brown, Kan Liang and Zhang Rui.
These changes should have no effect on the kernel's existing
understanding of topologies, i.e. there should be no behavioral impact
on cache, NUMA, scheduler, perf and other topologies and overall
system performance"
* 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/rapl: Cosmetic rename internal variables in response to multi-die/pkg support
perf/x86/intel/uncore: Cosmetic renames in response to multi-die/pkg support
hwmon/coretemp: Cosmetic: Rename internal variables to zones from packages
thermal/x86_pkg_temp_thermal: Cosmetic: Rename internal variables to zones from packages
perf/x86/intel/cstate: Support multi-die/package
perf/x86/intel/rapl: Support multi-die/package
perf/x86/intel/uncore: Support multi-die/package
topology: Create core_cpus and die_cpus sysfs attributes
topology: Create package_cpus sysfs attribute
hwmon/coretemp: Support multi-die/package
powercap/intel_rapl: Update RAPL domain name and debug messages
thermal/x86_pkg_temp_thermal: Support multi-die/package
powercap/intel_rapl: Support multi-die/package
powercap/intel_rapl: Simplify rapl_find_package()
x86/topology: Define topology_logical_die_id()
x86/topology: Define topology_die_id()
cpu/topology: Export die_id
x86/topology: Create topology_max_die_per_package()
x86/topology: Add CPUID.1F multi-die/package support
|
|
Add a special Kconfig symbol X86_HV_CALLBACK_VECTOR so that the guests
using the hypervisor interrupt callback counter can select and thus
enable that counter. Select it when xen or hyperv support is enabled. No
functional changes.
Signed-off-by: Zhao Yakui <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: [email protected]
Cc: Nicolai Stange <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Boris Ostrovsky <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Create CPU topology sysfs attributes: "core_cpus" and "core_cpus_list"
These attributes represent all of the logical CPUs that share the
same core.
These attriutes is synonymous with the existing "thread_siblings" and
"thread_siblings_list" attribute, which will be deprecated.
Create CPU topology sysfs attributes: "die_cpus" and "die_cpus_list".
These attributes represent all of the logical CPUs that share the
same die.
Suggested-by: Brice Goglin <[email protected]>
Signed-off-by: Len Brown <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Ingo Molnar <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/071c23a298cd27ede6ed0b6460cae190d193364f.1557769318.git.len.brown@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- some minor cleanups
- two small corrections for Xen on ARM
- two fixes for Xen PVH guest support
- a patch for a new command line option to tune virtual timer handling
* tag 'for-linus-5.2b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: Use p2m entry with lock protection
xen/arm: Free p2m entry if fail to add it to RB tree
xen/pvh: correctly setup the PV EFI interface for dom0
xen/pvh: set xen_domain_type to HVM in xen_pvh_init
xenbus: drop useless LIST_HEAD in xenbus_write_watch() and xenbus_file_write()
xen-netfront: mark expected switch fall-through
xen: xen-pciback: fix warning Using plain integer as NULL pointer
x86/xen: Add "xen_timer_slop" command line option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The changes in here are:
- text_poke() fixes and an extensive set of executability lockdowns,
to (hopefully) eliminate the last residual circumstances under
which we are using W|X mappings even temporarily on x86 kernels.
This required a broad range of surgery in text patching facilities,
module loading, trampoline handling and other bits.
- tweak page fault messages to be more informative and more
structured.
- remove DISCONTIGMEM support on x86-32 and make SPARSEMEM the
default.
- reduce KASLR granularity on 5-level paging kernels from 512 GB to
1 GB.
- misc other changes and updates"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/mm: Initialize PGD cache during mm initialization
x86/alternatives: Add comment about module removal races
x86/kprobes: Use vmalloc special flag
x86/ftrace: Use vmalloc special flag
bpf: Use vmalloc special flag
modules: Use vmalloc special flag
mm/vmalloc: Add flag for freeing of special permsissions
mm/hibernation: Make hibernation handle unmapped pages
x86/mm/cpa: Add set_direct_map_*() functions
x86/alternatives: Remove the return value of text_poke_*()
x86/jump-label: Remove support for custom text poker
x86/modules: Avoid breaking W^X while loading modules
x86/kprobes: Set instruction page as executable
x86/ftrace: Set trampoline pages as executable
x86/kgdb: Avoid redundant comparison of patched code
x86/alternatives: Use temporary mm for text poking
x86/alternatives: Initialize temporary mm for patching
fork: Provide a function for copying init_mm
uprobes: Initialize uprobes earlier
x86/mm: Save debug registers when loading a temporary mm
...
|
|
text_poke() can potentially compromise security as it sets temporary
PTEs in the fixmap. These PTEs might be used to rewrite the kernel code
from other cores accidentally or maliciously, if an attacker gains the
ability to write onto kernel memory.
Moreover, since remote TLBs are not flushed after the temporary PTEs are
removed, the time-window in which the code is writable is not limited if
the fixmap PTEs - maliciously or accidentally - are cached in the TLB.
To address these potential security hazards, use a temporary mm for
patching the code.
Finally, text_poke() is also not conservative enough when mapping pages,
as it always tries to map 2 pages, even when a single one is sufficient.
So try to be more conservative, and do not map more than needed.
Signed-off-by: Nadav Amit <[email protected]>
Signed-off-by: Rick Edgecombe <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This involves initializing the boot params EFI related fields and the
efi global variable.
Without this fix a PVH dom0 doesn't detect when booted from EFI, and
thus doesn't support accessing any of the EFI related data.
Reported-by: PGNet Dev <[email protected]>
Signed-off-by: Roger Pau Monné <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Cc: [email protected] # 4.19+
|
|
Or else xen_domain() returns false despite xen_pvh being set.
Signed-off-by: Roger Pau Monné <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Cc: [email protected] # 4.19+
|
|
Add a new command-line option "xen_timer_slop=<INT>" that sets the
minimum delta of virtual Xen timers. This commit does not change the
default timer slop value for virtual Xen timers.
Lowering the timer slop value should improve the accuracy of virtual
timers (e.g., better process dispatch latency), but it will likely
increase the number of virtual timer interrupts (relative to the
original slop setting).
The original timer slop value has not changed since the introduction
of the Xen-aware Linux kernel code. This commit provides users an
opportunity to tune timer performance given the refinements to
hardware and the Xen event channel processing. It also mirrors
a feature in the Xen hypervisor - the "timer_slop" Xen command line
option.
[boris: updated comment describing TIMER_SLOP]
Signed-off-by: Ryan Thibodeaux <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
Currently, the IRQ stack is hardcoded as the first page of the percpu
area, and the stack canary lives on the IRQ stack. The former gets in
the way of adding an IRQ stack guard page, and the latter is a potential
weakness in the stack canary mechanism.
Split the IRQ stack into its own private percpu pages.
[ tglx: Make 64 and 32 bit share struct irq_stack ]
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: "Chang S. Bae" <[email protected]>
Cc: Dominik Brodowski <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Jordan Borgner <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Maran Wilson <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolai Stange <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Pu Wen <[email protected]>
Cc: "Rafael Ávila de Espíndola" <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
irq_ctx_init() crashes hard on page allocation failures. While that's ok
during early boot, it's just wrong in the CPU hotplug bringup code.
Check the page allocation failure and return -ENOMEM and handle it at the
call sites. On early boot the only way out is to BUG(), but on CPU hotplug
there is no reason to crash, so just abort the operation.
Rename the function to something more sensible while at it.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Alison Schofield <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Nicolai Stange <[email protected]>
Cc: Pu Wen <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Shaokun Zhang <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Suravee Suthikulpanit <[email protected]>
Cc: x86-ml <[email protected]>
Cc: [email protected]
Cc: Yazen Ghannam <[email protected]>
Cc: Yi Wang <[email protected]>
Cc: Zhenzhong Duan <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.
The changes have been produced by the following command:
git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done
And verifying the result.
Link: http://lkml.kernel.org/r/[email protected]
Cc: Andy Shevchenko <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Sakari Ailus <[email protected]>
Acked-by: David Sterba <[email protected]> (for btrfs)
Acked-by: Mike Rapoport <[email protected]> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <[email protected]> (for drivers/pci)
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
|
|
Merge misc updates from Andrew Morton:
- a few misc things
- the rest of MM
- remove flex_arrays, replace with new simple radix-tree implementation
* emailed patches from Andrew Morton <[email protected]>: (38 commits)
Drop flex_arrays
sctp: convert to genradix
proc: commit to genradix
generic radix trees
selinux: convert to kvmalloc
md: convert to kvmalloc
openvswitch: convert to kvmalloc
of: fix kmemleak crash caused by imbalance in early memory reservation
mm: memblock: update comments and kernel-doc
memblock: split checks whether a region should be skipped to a helper function
memblock: remove memblock_{set,clear}_region_flags
memblock: drop memblock_alloc_*_nopanic() variants
memblock: memblock_alloc_try_nid: don't panic
treewide: add checks for the return value of memblock_alloc*()
swiotlb: add checks for the return value of memblock_alloc*()
init/main: add checks for the return value of memblock_alloc*()
mm/percpu: add checks for the return value of memblock_alloc*()
sparc: add checks for the return value of memblock_alloc*()
ia64: add checks for the return value of memblock_alloc*()
arch: don't memset(0) memory returned by memblock_alloc()
...
|
|
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error. The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.
The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.
@@
expression ptr, size, align;
@@
ptr = memblock_alloc(size, align);
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);
[[email protected]: use '%pa' with 'phys_addr_t' type]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix format strings for panics after memblock_alloc]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: don't panic if the allocation in sparse_buffer_init fails]
Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[[email protected]: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Guo Ren <[email protected]> [c-sky]
Acked-by: Paul Burton <[email protected]> [MIPS]
Acked-by: Heiko Carstens <[email protected]> [s390]
Reviewed-by: Juergen Gross <[email protected]> [Xen]
Reviewed-by: Geert Uytterhoeven <[email protected]> [m68k]
Acked-by: Max Filippov <[email protected]> [xtensa]
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"xen fixes and features:
- remove fallback code for very old Xen hypervisors
- three patches for fixing Xen dom0 boot regressions
- an old patch for Xen PCI passthrough which was never applied for
unknown reasons
- some more minor fixes and cleanup patches"
* tag 'for-linus-5.1a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix dom0 boot on huge systems
xen, cpu_hotplug: Prevent an out of bounds access
xen: remove pre-xen3 fallback handlers
xen/ACPI: Switch to bitmap_zalloc()
x86/xen: dont add memory above max allowed allocation
x86: respect memory size limiting via mem= parameter
xen/gntdev: Check and release imported dma-bufs on close
xen/gntdev: Do not destroy context while dma-bufs are in use
xen/pciback: Don't disable PCI_COMMAND on PCI device reset.
xen-scsiback: mark expected switch fall-through
xen: mark expected switch fall-through
|