aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/xen/enlighten_pv.c
AgeCommit message (Collapse)AuthorFilesLines
2020-06-11x86/entry: Convert Bounds exception to IDTENTRYThomas Gleixner1-1/+1
Convert #BR to IDTENTRY: - Implement the C entry point with DEFINE_IDTENTRY - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes - Remove the RCU warning as the new entry macro ensures correctness No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert Overflow exception to IDTENTRYThomas Gleixner1-1/+1
Convert #OF to IDTENTRY: - Implement the C entry point with DEFINE_IDTENTRY - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert Divide Error to IDTENTRYThomas Gleixner1-1/+6
Convert #DE to IDTENTRY: - Implement the C entry point with DEFINE_IDTENTRY - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport1-1/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-02-29x86/ioperm: Add new paravirt function update_io_bitmap()Juergen Gross1-0/+25
Commit 111e7b15cf10f6 ("x86/ioperm: Extend IOPL config to control ioperm() as well") reworked the iopl syscall to use I/O bitmaps. Unfortunately this broke Xen PV domains using that syscall as there is currently no I/O bitmap support in PV domains. Add I/O bitmap support via a new paravirt function update_io_bitmap which Xen PV domains can use to update their I/O bitmaps via a hypercall. Fixes: 111e7b15cf10f6 ("x86/ioperm: Extend IOPL config to control ioperm() as well") Reported-by: Jan Beulich <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Jan Beulich <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Cc: <[email protected]> # 5.5 Link: https://lkml.kernel.org/r/[email protected]
2020-02-21Merge tag 'for-linus-5.6-rc3-tag' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two small fixes for Xen: - a fix to avoid warnings with new gcc - a fix for incorrectly disabled interrupts when calling _cond_resched()" * tag 'for-linus-5.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Enable interrupts when calling _cond_resched() x86/xen: Distribute switch variables for initialization
2020-02-20x86/xen: Distribute switch variables for initializationKees Cook1-3/+4
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. arch/x86/xen/enlighten_pv.c: In function ‘xen_write_msr_safe’: arch/x86/xen/enlighten_pv.c:904:12: warning: statement will never be executed [-Wswitch-unreachable] 904 | unsigned which; | ^~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Juergen Gross <[email protected]> [boris: made @which an 'unsigned int'] Signed-off-by: Boris Ostrovsky <[email protected]>
2020-01-29x86/timer: Don't skip PIT setup when APIC is disabled or in legacy modeThomas Gleixner1-0/+1
Tony reported a boot regression caused by the recent workaround for systems which have a disabled (clock gate off) PIT. On his machine the kernel fails to initialize the PIT because apic_needs_pit() does not take into account whether the local APIC interrupt delivery mode will actually allow to setup and use the local APIC timer. This should be easy to reproduce with acpi=off on the command line which also disables HPET. Due to the way the PIT/HPET and APIC setup ordering works (APIC setup can require working PIT/HPET) the information is not available at the point where apic_needs_pit() makes this decision. To address this, split out the interrupt mode selection from apic_intr_mode_init(), invoke the selection before making the decision whether PIT is required or not, and add the missing checks into apic_needs_pit(). Fixes: c8c4076723da ("x86/timer: Skip PIT initialization on modern chipsets") Reported-by: Anthony Buckley <[email protected]> Tested-by: Anthony Buckley <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Cc: Daniel Drake <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206125 Link: https://lore.kernel.org/r/[email protected]
2019-11-16x86/iopl: Remove legacy IOPL optionThomas Gleixner1-10/+0
The IOPL emulation via the I/O bitmap is sufficient. Remove the legacy cruft dealing with the (e)flags based IOPL mechanism. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Juergen Gross <[email protected]> (Paravirt and Xen parts) Acked-by: Andy Lutomirski <[email protected]>
2019-10-26Merge tag 'for-linus-5.4-rc5-tag' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixlet from Juergen Gross: "Just one patch for issuing a deprecation warning for 32-bit Xen pv guests" * tag 'for-linus-5.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: issue deprecation warning for 32-bit pv guest
2019-10-25xen: issue deprecation warning for 32-bit pv guestJuergen Gross1-0/+8
Support for the kernel as Xen 32-bit PV guest will soon be removed. Issue a warning when booted as such. Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2019-07-22x86/paravirt: Drop {read,write}_cr8() hooksAndrew Cooper1-15/+0
There is a lot of infrastructure for functionality which is used exclusively in __{save,restore}_processor_state() on the suspend/resume path. cr8 is an alias of APIC_TASKPRI, and APIC_TASKPRI is saved/restored by lapic_{suspend,resume}(). Saving and restoring cr8 independently of the rest of the Local APIC state isn't a clever thing to be doing. Delete the suspend/resume cr8 handling, which shrinks the size of struct saved_context, and allows for the removal of both PVOPS. Signed-off-by: Andrew Cooper <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-07-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 specific fixes and updates: - The CR2 corruption fixes which store CR2 early in the entry code and hand the stored address to the fault handlers. - Revert a forgotten leftover of the dropped FSGSBASE series. - Plug a memory leak in the boot code. - Make the Hyper-V assist functionality robust by zeroing the shadow page. - Remove a useless check for dead processes with LDT - Update paravirt and VMware maintainers entries. - A few cleanup patches addressing various compiler warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Prevent clobbering of saved CR2 value x86/hyper-v: Zero out the VP ASSIST PAGE on allocation x86, boot: Remove multiple copy of static function sanitize_boot_params() x86/boot/compressed/64: Remove unused variable x86/boot/efi: Remove unused variables x86/mm, tracing: Fix CR2 corruption x86/entry/64: Update comments and sanity tests for create_gap x86/entry/64: Simplify idtentry a little x86/entry/32: Simplify common_exception x86/paravirt: Make read_cr2() CALLEE_SAVE MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE x86/process: Delete useless check for dead process with LDT x86: math-emu: Hide clang warnings for 16-bit overflow x86/e820: Use proper booleans instead of 0/1 x86/apic: Silence -Wtype-limits compiler warnings x86/mm: Free sme_early_buffer after init x86/boot: Fix memory leak in default_get_smp_config() Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
2019-07-17x86/paravirt: Make read_cr2() CALLEE_SAVEPeter Zijlstra1-1/+2
The one paravirt read_cr2() implementation (Xen) is actually quite trivial and doesn't need to clobber anything other than the return register. Making read_cr2() CALLEE_SAVE avoids all the PUSH/POP nonsense and allows more convenient use from assembly. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-07-17xen/pv: Fix a boot up hang revealed by int3 self testZhenzhong Duan1-1/+1
Commit 7457c0da024b ("x86/alternatives: Add int3_emulate_call() selftest") is used to ensure there is a gap setup in int3 exception stack which could be used for inserting call return address. This gap is missed in XEN PV int3 exception entry path, then below panic triggered: [ 0.772876] general protection fault: 0000 [#1] SMP NOPTI [ 0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11 [ 0.772893] RIP: e030:int3_magic+0x0/0x7 [ 0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246 [ 0.773334] Call Trace: [ 0.773334] alternative_instructions+0x3d/0x12e [ 0.773334] check_bugs+0x7c9/0x887 [ 0.773334] ? __get_locked_pte+0x178/0x1f0 [ 0.773334] start_kernel+0x4ff/0x535 [ 0.773334] ? set_init_arg+0x55/0x55 [ 0.773334] xen_start_kernel+0x571/0x57a For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with %rcx/%r11 on the stack. To convert back to "normal" looking exceptions, the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'. E.g. Extracting 'xen_pv_trap xenint3' we have: xen_xenint3: pop %rcx; pop %r11; jmp xenint3 As xenint3 and int3 entry code are same except xenint3 doesn't generate a gap, we can fix it by using int3 and drop useless xenint3. Signed-off-by: Zhenzhong Duan <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Stefano Stabellini <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Andrew Cooper <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2019-07-17x86: Add "nopv" parameter to disable PV extensionsZhenzhong Duan1-0/+1
In virtualization environment, PV extensions (drivers, interrupts, timers, etc) are enabled in the majority of use cases which is the best option. However, in some cases (kexec not fully working, benchmarking) we want to disable PV extensions. We have "xen_nopv" for that purpose but only for XEN. For a consistent admin experience a common command line parameter "nopv" set across all PV guest implementations is a better choice. There are guest types which just won't work without PV extensions, like Xen PV, Xen PVH and jailhouse. add a "ignore_nopv" member to struct hypervisor_x86 set to true for those guest types and call the detect functions only if nopv is false or ignore_nopv is true. Suggested-by: Juergen Gross <[email protected]> Signed-off-by: Zhenzhong Duan <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jan Kiszka <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Stefano Stabellini <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2019-04-25xen/pvh: correctly setup the PV EFI interface for dom0Roger Pau Monne1-1/+1
This involves initializing the boot params EFI related fields and the efi global variable. Without this fix a PVH dom0 doesn't detect when booted from EFI, and thus doesn't support accessing any of the EFI related data. Reported-by: PGNet Dev <[email protected]> Signed-off-by: Roger Pau Monné <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]> Cc: [email protected] # 4.19+
2019-01-14always clear the X2APIC_ENABLE bit for PV guestTalons Lee1-4/+1
Commit e657fcc clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit. Signed-off-by: Talons Lee <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-2/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [[email protected]: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Burton <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Serge Semin <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-09-03x86/paravirt: Use a single ops structureJuergen Gross1-13/+18
Instead of using six globally visible paravirt ops structures combine them in a single structure, keeping the original structures as sub-structures. This avoids the need to assemble struct paravirt_patch_template at runtime on the stack each time apply_paravirt() is being called (i.e. when loading a module). [ tglx: Made the struct and the initializer tabular for readability sake ] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-20x86/xen: enable early use of set_fixmap in 32-bit Xen PV guestJuergen Gross1-0/+2
Commit 7b25b9cb0dad83 ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()") moved the mapping of the shared info area before pagetable_init(). This breaks booting as 32-bit PV guest as the use of set_fixmap isn't possible at this time on 32-bit. This can be worked around by populating the needed PMD on 32-bit kernel earlier. In order not to reimplement populate_extra_pte() using extend_brk() for allocating new page tables extend alloc_low_pages() to do that in case the early page table pool is not yet available. Fixes: 7b25b9cb0dad83 ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2018-08-20x86/Xen: further refine add_preferred_console() invocationsJan Beulich1-1/+4
As the sequence of invocations matters, add "tty" only after "hvc" when a VGA console is available (which is often the case for Dom0, but hardly ever for DomU). Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2018-08-20x86/Xen: mark xen_setup_gdt() __initJan Beulich1-3/+3
Its only caller is __init, so to avoid section mismatch warnings when a compiler decides to not inline the function marke this function so as well. Take the opportunity and also make the function actually use its argument: The sole caller passes in zero anyway. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2018-08-14Merge tag 'for-linus-4.19-rc1-tag' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - add dma-buf functionality to Xen grant table handling - fix for booting the kernel as Xen PVH dom0 - fix for booting the kernel as a Xen PV guest with CONFIG_DEBUG_VIRTUAL enabled - other minor performance and style fixes * tag 'for-linus-4.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix balloon initialization for PVH Dom0 xen: don't use privcmd_call() from xen_mc_flush() xen/pv: Call get_cpu_address_sizes to set x86_virt/phys_bits xen/biomerge: Use true and false for boolean values xen/gntdev: don't dereference a null gntdev_dmabuf on allocation failure xen/spinlock: Don't use pvqspinlock if only 1 vCPU xen/gntdev: Implement dma-buf import functionality xen/gntdev: Implement dma-buf export functionality xen/gntdev: Add initial support for dma-buf UAPI xen/gntdev: Make private routines/structures accessible xen/gntdev: Allow mappings for DMA buffers xen/grant-table: Allow allocating buffers suitable for DMA xen/balloon: Share common memory reservation routines xen/grant-table: Make set/clear page private code shared
2018-08-06xen/pv: Call get_cpu_address_sizes to set x86_virt/phys_bitsM. Vefa Bicakci1-0/+3
Commit d94a155c59c9 ("x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption") has moved the query and calculation of the x86_virt_bits and x86_phys_bits fields of the cpuinfo_x86 struct from the get_cpu_cap function to a new function named get_cpu_address_sizes. One of the call sites related to Xen PV VMs was unfortunately missed in the aforementioned commit. This prevents successful boot-up of kernel versions 4.17 and up in Xen PV VMs if CONFIG_DEBUG_VIRTUAL is enabled, due to the following code path: enlighten_pv.c::xen_start_kernel mmu_pv.c::xen_reserve_special_pages page.h::__pa physaddr.c::__phys_addr physaddr.h::phys_addr_valid phys_addr_valid uses boot_cpu_data.x86_phys_bits to validate physical addresses. boot_cpu_data.x86_phys_bits is no longer populated before the call to xen_reserve_special_pages due to the aforementioned commit though, so the validation performed by phys_addr_valid fails, which causes __phys_addr to trigger a BUG, preventing boot-up. Signed-off-by: M. Vefa Bicakci <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # for v4.17 and up Fixes: d94a155c59c9 ("x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption") Signed-off-by: Boris Ostrovsky <[email protected]>
2018-07-20x86/xen/time: Initialize pv xen time in init_hypervisor_platform()Pavel Tatashin1-27/+24
In every hypervisor except for xen pv time ops are initialized in init_hypervisor_platform(). Xen PV domains initialize time ops in x86_init.paging.pagetable_init(), by calling xen_setup_shared_info() which is a poor design, as time is needed prior to memory allocator. xen_setup_shared_info() is called from two places: during boot, and after suspend. Split the content of xen_setup_shared_info() into three places: 1. add the clock relavent data into new xen pv init_platform vector, and set clock ops in there. 2. move xen_setup_vcpu_info_placement() to new xen_pv_guest_late_init() call. 3. Re-initializing parts of shared info copy to xen_pv_post_suspend() to be symmetric to xen_pv_pre_suspend Signed-off-by: Pavel Tatashin <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-07-13xen: setup pv irq ops vector earlierJuergen Gross1-13/+11
Setting pv_irq_ops for Xen PV domains should be done as early as possible in order to support e.g. very early printk() usage. The same applies to xen_vcpu_info_reset(0), as it is needed for the pv irq ops. Move the call of xen_setup_machphys_mapping() after initializing the pv functions as it contains a WARN_ON(), too. Remove the no longer necessary conditional in xen_init_irq_ops() from PVH V1 times to make clear this is a PV only function. Cc: <[email protected]> # 4.14 Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-07-12xen: remove global bit from __default_kernel_pte_mask for pv guestsJuergen Gross1-0/+1
When removing the global bit from __supported_pte_mask do the same for __default_kernel_pte_mask in order to avoid the WARN_ONCE() in check_pgprot() when setting a kernel pte before having called init_mem_mapping(). Cc: <[email protected]> # 4.17 Reported-by: Michael Young <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-06-19xen: share start flags between PV and PVHRoger Pau Monne1-0/+1
Use a global variable to store the start flags for both PV and PVH. This allows the xen_initial_domain macro to work properly on PVH. Note that ARM is also switched to use the new variable. Signed-off-by: Boris Ostrovsky <[email protected]> Signed-off-by: Roger Pau Monné <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-04-19x86/xen: Remove use of VLAsLaura Abbott1-55/+31
There's an ongoing effort to remove VLAs[1] from the kernel to eventually turn on -Wvla. It turns out, the few VLAs in use in Xen produce only a single entry array that is always bounded by GDT_SIZE. Clean up the code to get rid of the VLA and the loop. [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Laura Abbott <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> [boris: Use BUG_ON(size>PAGE_SIZE) instead of GDT_SIZE] Signed-off-by: Boris Ostrovsky <[email protected]>
2018-03-21x86/xen: Delay get_cpu_cap until stack canary is establishedJason Andryuk1-4/+4
Commit 2cc42bac1c79 ("x86-64/Xen: eliminate W+X mappings") introduced a call to get_cpu_cap, which is fstack-protected. This is works on x86-64 as commit 4f277295e54c ("x86/xen: init %gs very early to avoid page faults with stack protector") ensures the stack protector is configured, but it it did not cover x86-32. Delay calling get_cpu_cap until after xen_setup_gdt has initialized the stack canary. Without this, a 32bit PV machine crashes early in boot. (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.6.6-xc x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e019:[<00000000c10362f8>] And the PV kernel IP corresponds to init_scattered_cpuid_features 0xc10362f8 <+24>: mov %gs:0x14,%eax Fixes 2cc42bac1c79 ("x86-64/Xen: eliminate W+X mappings") Signed-off-by: Jason Andryuk <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2018-02-28x86/xen: add tty0 and hvc0 as preferred consoles for dom0Juergen Gross1-2/+4
Today the tty0 and hvc0 consoles are added as a preferred consoles for pv domUs only. As this requires a boot parameter for getting dom0 messages per default, add them for dom0, too. Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2017-12-22Merge tag 'for-linus-4.15-rc5-tag' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two fixes for running under Xen: - a fix avoiding resource conflicts between adding mmio areas and memory hotplug - a fix setting NX bits in page table entries copied from Xen when running a PV guest" * tag 'for-linus-4.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Mark unallocated host memory as UNUSABLE x86-64/Xen: eliminate W+X mappings
2017-12-19x86-64/Xen: eliminate W+X mappingsJan Beulich1-0/+3
A few thousand such pages are usually left around due to the re-use of L1 tables having been provided by the hypervisor (Dom0) or tool stack (DomU). Set NX in the direct map variant, which needs to be done in L2 due to the dual use of the re-used L1s. For x86_configure_nx() to actually do what it is supposed to do, call get_cpu_cap() first. This was broken by commit 4763ed4d45 ("x86, mm: Clean up and simplify NX enablement") when switching away from the direct EFER read. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2017-12-18Merge branch 'WIP.x86-pti.entry-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 syscall entry code changes for PTI from Ingo Molnar: "The main changes here are Andy Lutomirski's changes to switch the x86-64 entry code to use the 'per CPU entry trampoline stack'. This, besides helping fix KASLR leaks (the pending Page Table Isolation (PTI) work), also robustifies the x86 entry code" * 'WIP.x86-pti.entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) x86/cpufeatures: Make CPU bugs sticky x86/paravirt: Provide a way to check for hypervisors x86/paravirt: Dont patch flush_tlb_single x86/entry/64: Make cpu_entry_area.tss read-only x86/entry: Clean up the SYSENTER_stack code x86/entry/64: Remove the SYSENTER stack canary x86/entry/64: Move the IST stacks into struct cpu_entry_area x86/entry/64: Create a per-CPU SYSCALL entry trampoline x86/entry/64: Return to userspace from the trampoline stack x86/entry/64: Use a per-CPU trampoline stack for IDT entries x86/espfix/64: Stop assuming that pt_regs is on the entry stack x86/entry/64: Separate cpu_current_top_of_stack from TSS.sp0 x86/entry: Remap the TSS into the CPU entry area x86/entry: Move SYSENTER_stack to the beginning of struct tss_struct x86/dumpstack: Handle stack overflow on all stacks x86/entry: Fix assumptions that the HW TSS is at the beginning of cpu_tss x86/kasan/64: Teach KASAN about the cpu_entry_area x86/mm/fixmap: Generalize the GDT fixmap mechanism, introduce struct cpu_entry_area x86/entry/gdt: Put per-CPU GDT remaps in ascending order x86/dumpstack: Add get_stack_info() support for the SYSENTER stack ...
2017-12-17x86/entry/64: Make cpu_entry_area.tss read-onlyAndy Lutomirski1-1/+1
The TSS is a fairly juicy target for exploits, and, now that the TSS is in the cpu_entry_area, it's no longer protected by kASLR. Make it read-only on x86_64. On x86_32, it can't be RO because it's written by the CPU during task switches, and we use a task gate for double faults. I'd also be nervous about errata if we tried to make it RO even on configurations without double fault handling. [ tglx: AMD confirmed that there is no problem on 64-bit with TSS RO. So it's probably safe to assume that it's a non issue, though Intel might have been creative in that area. Still waiting for confirmation. ] Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Dave Hansen <[email protected]> Cc: David Laight <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Eduardo Valentin <[email protected]> Cc: Greg KH <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-12-17Merge commit 'upstream-x86-virt' into WIP.x86/mmIngo Molnar1-3/+3
Merge a minimal set of virt cleanups, for a base for the MM isolation patches. Signed-off-by: Ingo Molnar <[email protected]>
2017-12-17Merge commit 'upstream-x86-entry' into WIP.x86/mmIngo Molnar1-5/+4
Pull in a minimal set of v4.15 entry code changes, for a base for the MM isolation patches. Signed-off-by: Ingo Molnar <[email protected]>
2017-11-28x86/xen: Support early interrupts in xen pv guestsJuergen Gross1-13/+24
Add early interrupt handlers activated by idt_setup_early_handler() to the handlers supported by Xen pv guests. This will allow for early WARN() calls not crashing the guest. Suggested-by: Andy Lutomirski <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2017-11-13Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 APIC updates from Thomas Gleixner: "This update provides a major overhaul of the APIC initialization and vector allocation code: - Unification of the APIC and interrupt mode setup which was scattered all over the place and was hard to follow. This also distangles the timer setup from the APIC initialization which brings a clear separation of functionality. Great detective work from Dou Lyiang! - Refactoring of the x86 vector allocation mechanism. The existing code was based on nested loops and rather convoluted APIC callbacks which had a horrible worst case behaviour and tried to serve all different use cases in one go. This led to quite odd hacks when supporting the new managed interupt facility for multiqueue devices and made it more or less impossible to deal with the vector space exhaustion which was a major roadblock for server hibernation. Aside of that the code dealing with cpu hotplug and the system vectors was disconnected from the actual vector management and allocation code, which made it hard to follow and maintain. Utilizing the new bitmap matrix allocator core mechanism, the new allocator and management code consolidates the handling of system vectors, legacy vectors, cpu hotplug mechanisms and the actual allocation which needs to be aware of system and legacy vectors and hotplug constraints into a single consistent entity. This has one visible change: The support for multi CPU targets of interrupts, which is only available on a certain subset of CPUs/APIC variants has been removed in favour of single interrupt targets. A proper analysis of the multi CPU target feature revealed that there is no real advantage as the vast majority of interrupts end up on the CPU with the lowest APIC id in the set of target CPUs anyway. That change was agreed on by the relevant folks and allowed to simplify the implementation significantly and to replace rather fragile constructs like the vector cleanup IPI with straight forward and solid code. Furthermore this allowed to cleanly separate the allocation details for legacy, normal and managed interrupts: * Legacy interrupts are not longer wasting 16 vectors unconditionally * Managed interrupts have now a guaranteed vector reservation, but the actual vector assignment happens when the interrupt is requested. It's guaranteed not to fail. * Normal interrupts no longer allocate vectors unconditionally when the interrupt is set up (IO/APIC init or MSI(X) enable). The mechanism has been switched to a best effort reservation mode. The actual allocation happens when the interrupt is requested. Contrary to managed interrupts the request can fail due to vector space exhaustion, but drivers must handle a fail of request_irq() anyway. When the interrupt is freed, the vector is handed back as well. This solves a long standing problem with large unconditional vector allocations for a certain class of enterprise devices which prevented server hibernation due to vector space exhaustion when the unused allocated vectors had to be migrated to CPU0 while unplugging all non boot CPUs. The code has been equipped with trace points and detailed debugfs information to aid analysis of the vector space" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code genirq: Add config option for reservation mode x86/vector: Use correct per cpu variable in free_moved_vector() x86/apic/vector: Ignore set_affinity call for inactive interrupts x86/apic: Fix spelling mistake: "symmectic" -> "symmetric" x86/apic: Use dead_cpu instead of current CPU when cleaning up ACPI/init: Invoke early ACPI initialization earlier x86/vector: Respect affinity mask in irq descriptor x86/irq: Simplify hotplug vector accounting x86/vector: Switch IOAPIC to global reservation mode x86/vector/msi: Switch to global reservation mode x86/vector: Handle managed interrupts proper x86/io_apic: Reevaluate vector configuration on activate() iommu/amd: Reevaluate vector configuration on activate() iommu/vt-d: Reevaluate vector configuration on activate() x86/apic/msi: Force reactivation of interrupts at startup time x86/vector: Untangle internal state from irq_cfg x86/vector: Compile SMP only code conditionally x86/apic: Remove unused callbacks ...
2017-11-13Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - a refactoring of the early virt init code by merging 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init', which allows simplifications and also the addition of a new ->guest_late_init() callback. (Juergen Gross) - timer_setup() conversion of the UV code (Kees Cook)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/virt/xen: Use guest_late_init to detect Xen PVH guest x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA x86/virt: Add enum for hypervisors to replace x86_hyper x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init' x86/platform/UV: Convert timers to use timer_setup()
2017-11-10x86/virt: Add enum for hypervisors to replace x86_hyperJuergen Gross1-2/+2
The x86_hyper pointer is only used for checking whether a virtual device is supporting the hypervisor the system is running on. Use an enum for that purpose instead and drop the x86_hyper pointer. Signed-off-by: Juergen Gross <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Acked-by: Xavier Deguillard <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-11-10x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' ↵Juergen Gross1-1/+1
and 'struct x86_init' Instead of x86_hyper being either NULL on bare metal or a pointer to a struct hypervisor_x86 in case of the kernel running as a guest merge the struct into x86_platform and x86_init. This will remove the need for wrappers making it hard to find out what is being called. With dummy functions added for all callbacks testing for a NULL function pointer can be removed, too. Suggested-by: Ingo Molnar <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-11-07Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflictsIngo Molnar1-0/+1
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar <[email protected]>
2017-11-07Merge branch 'linus' into x86/apic, to resolve conflictsIngo Molnar1-0/+1
Conflicts: arch/x86/include/asm/x2apic.h Signed-off-by: Ingo Molnar <[email protected]>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Philippe Ombredanne <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-11-02x86/entry/64: Pass SP0 directly to load_sp0()Andy Lutomirski1-4/+3
load_sp0() had an odd signature: void load_sp0(struct tss_struct *tss, struct thread_struct *thread); Simplify it to: void load_sp0(unsigned long sp0); Also simplify a few get_cpu()/put_cpu() sequences to preempt_disable()/preempt_enable(). Signed-off-by: Andy Lutomirski <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/2655d8b42ed940aa384fe18ee1129bbbcf730a08.1509609304.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-11-02xen, x86/entry/64: Add xen NMI trap entryJuergen Gross1-1/+1
Instead of trying to execute any NMI via the bare metal's NMI trap handler use a Xen specific one for PV domains, like we do for e.g. debug traps. As in a PV domain the NMI is handled via the normal kernel stack this is the correct thing to do. This will enable us to get rid of the very fragile and questionable dependencies between the bare metal NMI handler and Xen assumptions believed to be broken anyway. Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/5baf5c0528d58402441550c5770b98e7961e7680.1509609304.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-25x86/init: Add intr_mode_init to x86_init_opsDou Liyang1-0/+1
X86 and XEN initialize interrupt delivery mode in different way. To avoid conditionals, add a new x86_init_ops function which defaults to the standard function and can be overridden by the early XEN platform code. [ tglx: Folded the XEN part which was a separate patch to preserve bisectability ] Signed-off-by: Dou Liyang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2017-09-13x86/paravirt: Remove no longer used paravirt functionsJuergen Gross1-2/+0
With removal of lguest some of the paravirt functions are no longer needed: ->read_cr4() ->store_idt() ->set_pmd_at() ->set_pud_at() ->pte_update() Remove them. Signed-off-by: Juergen Gross <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.