| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It is valid to receive external interrupt and have broken IDT entry,
which will lead to #GP with exit_int_into that will contain the index of
the IDT entry (e.g any value).
Other exceptions can happen as well, like #NP or #SS
(if stack switch fails).
Thus this warning can be user triggred and has very little value.
Cc: [email protected]
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This is SVM correctness fix - although a sane L1 would intercept
SHUTDOWN event, it doesn't have to, so we have to honour this.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
While not obivous, kvm_vcpu_reset() leaves the nested mode by clearing
'vcpu->arch.hflags' but it does so without all the required housekeeping.
On SVM, it is possible to have a vCPU reset while in guest mode because
unlike VMX, on SVM, INIT's are not latched in SVM non root mode and in
addition to that L1 doesn't have to intercept triple fault, which should
also trigger L1's reset if happens in L2 while L1 didn't intercept it.
If one of the above conditions happen, KVM will continue to use vmcb02
while not having in the guest mode.
Later the IA32_EFER will be cleared which will lead to freeing of the
nested guest state which will (correctly) free the vmcb02, but since
KVM still uses it (incorrectly) this will lead to a use after free
and kernel crash.
This issue is assigned CVE-2022-3344
Cc: [email protected]
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
add kvm_leave_nested which wraps a call to nested_ops->leave_nested
into a function.
Cc: [email protected]
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Make sure that KVM uses vmcb01 before freeing nested state, and warn if
that is not the case.
This is a minimal fix for CVE-2022-3344 making the kernel print a warning
instead of a kernel panic.
Cc: [email protected]
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
If the VM was terminated while nested, we free the nested state
while the vCPU still is in nested mode.
Soon a warning will be added for this condition.
Cc: [email protected]
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Do not recover (i.e. zap) an NX Huge Page that is being dirty tracked,
as it will just be faulted back in at the same 4KiB granularity when
accessed by a vCPU. This may need to be changed if KVM ever supports
2MiB (or larger) dirty tracking granularity, or faulting huge pages
during dirty tracking for reads/executes. However for now, these zaps
are entirely wasteful.
In order to check if this commit increases the CPU usage of the NX
recovery worker thread I used a modified version of execute_perf_test
[1] that supports splitting guest memory into multiple slots and reports
/proc/pid/schedstat:se.sum_exec_runtime for the NX recovery worker just
before tearing down the VM. The goal was to force a large number of NX
Huge Page recoveries and see if the recovery worker used any more CPU.
Test Setup:
echo 1000 > /sys/module/kvm/parameters/nx_huge_pages_recovery_period_ms
echo 10 > /sys/module/kvm/parameters/nx_huge_pages_recovery_ratio
Test Command:
./execute_perf_test -v64 -s anonymous_hugetlb_1gb -x 16 -o
| kvm-nx-lpage-re:se.sum_exec_runtime |
| ---------------------------------------- |
Run | Before | After |
------- | ------------------ | ------------------- |
1 | 730.084105 | 724.375314 |
2 | 728.751339 | 740.581988 |
3 | 736.264720 | 757.078163 |
Comparing the median results, this commit results in about a 1% increase
CPU usage of the NX recovery worker when testing a VM with 16 slots.
However, the effect is negligible with the default halving time of NX
pages, which is 1 hour rather than 10 seconds given by period_ms = 1000,
ratio = 10.
[1] https://lore.kernel.org/kvm/[email protected]/
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
A removed SPTE is never present, hence the "if" in kvm_tdp_mmu_map
only fails in the exact same conditions that the earlier loop
tested in order to issue a "break". So, instead of checking twice the
condition (upper level SPTEs could not be created or was frozen), just
exit the loop with a goto---the usual poor-man C replacement for RAII
early returns.
While at it, do not use the "ret" variable for return values of
functions that do not return a RET_PF_* enum. This is clearer
and also makes it possible to initialize ret to RET_PF_RETRY.
Suggested-by: Robert Hoo <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Now that the TDP MMU has a mechanism to split huge pages, use it in the
fault path when a huge page needs to be replaced with a mapping at a
lower level.
This change reduces the negative performance impact of NX HugePages.
Prior to this change if a vCPU executed from a huge page and NX
HugePages was enabled, the vCPU would take a fault, zap the huge page,
and mapping the faulting address at 4KiB with execute permissions
enabled. The rest of the memory would be left *unmapped* and have to be
faulted back in by the guest upon access (read, write, or execute). If
guest is backed by 1GiB, a single execute instruction can zap an entire
GiB of its physical address space.
For example, it can take a VM longer to execute from its memory than to
populate that memory in the first place:
$ ./execute_perf_test -s anonymous_hugetlb_1gb -v96
Populating memory : 2.748378795s
Executing from memory : 2.899670885s
With this change, such faults split the huge page instead of zapping it,
which avoids the non-present faults on the rest of the huge page:
$ ./execute_perf_test -s anonymous_hugetlb_1gb -v96
Populating memory : 2.729544474s
Executing from memory : 0.111965688s <---
This change also reduces the performance impact of dirty logging when
eager_page_split=N. eager_page_split=N (abbreviated "eps=N" below) can
be desirable for read-heavy workloads, as it avoids allocating memory to
split huge pages that are never written and avoids increasing the TLB
miss cost on reads of those pages.
| Config: ept=Y, tdp_mmu=Y, 5% writes |
| Iteration 1 dirty memory time |
| --------------------------------------------- |
vCPU Count | eps=N (Before) | eps=N (After) | eps=Y |
------------ | -------------- | ------------- | ------------ |
2 | 0.332305091s | 0.019615027s | 0.006108211s |
4 | 0.353096020s | 0.019452131s | 0.006214670s |
8 | 0.453938562s | 0.019748246s | 0.006610997s |
16 | 0.719095024s | 0.019972171s | 0.007757889s |
32 | 1.698727124s | 0.021361615s | 0.012274432s |
64 | 2.630673582s | 0.031122014s | 0.016994683s |
96 | 3.016535213s | 0.062608739s | 0.044760838s |
Eager page splitting remains beneficial for write-heavy workloads, but
the gap is now reduced.
| Config: ept=Y, tdp_mmu=Y, 100% writes |
| Iteration 1 dirty memory time |
| --------------------------------------------- |
vCPU Count | eps=N (Before) | eps=N (After) | eps=Y |
------------ | -------------- | ------------- | ------------ |
2 | 0.317710329s | 0.296204596s | 0.058689782s |
4 | 0.337102375s | 0.299841017s | 0.060343076s |
8 | 0.386025681s | 0.297274460s | 0.060399702s |
16 | 0.791462524s | 0.298942578s | 0.062508699s |
32 | 1.719646014s | 0.313101996s | 0.075984855s |
64 | 2.527973150s | 0.455779206s | 0.079789363s |
96 | 2.681123208s | 0.673778787s | 0.165386739s |
Further study is needed to determine if the remaining gap is acceptable
for customer workloads or if eager_page_split=N still requires a-priori
knowledge of the VM workload, especially when considering these costs
extrapolated out to large VMs with e.g. 416 vCPUs and 12TB RAM.
Signed-off-by: David Matlack <[email protected]>
Reviewed-by: Mingwei Zhang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <[email protected]>
Reported-by: Pawan Gupta <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When zapping a GFN range, pass 0 => ALL_ONES for the to-be-invalidated
range to effectively block all page faults while the zap is in-progress.
The invalidation helpers take a host virtual address, whereas zapping a
GFN obviously provides a guest physical address and with the wrong unit
of measurement (frame vs. byte).
Alternatively, KVM could walk all memslots to get the associated HVAs,
but thanks to SMM, that would require multiple lookups. And practically
speaking, kvm_zap_gfn_range() usage is quite rare and not a hot path,
e.g. MTRR and CR0.CD are almost guaranteed to be done only on vCPU0
during boot, and APICv inhibits are similarly infrequent operations.
Fixes: edb298c663fc ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range")
Reported-by: Chao Peng <[email protected]>
Cc: [email protected]
Cc: Maxim Levitsky <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The VCPU isn't expected to be runnable when the dirty ring becomes soft
full, until the dirty pages are harvested and the dirty ring is reset
from userspace. So there is a check in each guest's entrace to see if
the dirty ring is soft full or not. The VCPU is stopped from running if
its dirty ring has been soft full. The similar check will be needed when
the feature is going to be supported on ARM64. As Marc Zyngier suggested,
a new event will avoid pointless overhead to check the size of the dirty
ring ('vcpu->kvm->dirty_ring_size') in each guest's entrance.
Add KVM_REQ_DIRTY_RING_SOFT_FULL. The event is raised when the dirty ring
becomes soft full in kvm_dirty_ring_push(). The event is only cleared in
the check, done in the newly added helper kvm_dirty_ring_check_request().
Since the VCPU is not runnable when the dirty ring becomes soft full, the
KVM_REQ_DIRTY_RING_SOFT_FULL event is always set to prevent the VCPU from
running until the dirty pages are harvested and the dirty ring is reset by
userspace.
kvm_dirty_ring_soft_full() becomes a private function with the newly added
helper kvm_dirty_ring_check_request(). The alignment for the various event
definitions in kvm_host.h is changed to tab character by the way. In order
to avoid using 'container_of()', the argument @ring is replaced by @vcpu
in kvm_dirty_ring_push().
Link: https://lore.kernel.org/kvmarm/[email protected]
Suggested-by: Marc Zyngier <[email protected]>
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
virt/kvm/irqchip.c is including "irq.h" from the arch-specific KVM source
directory (i.e. not from arch/*/include) for the sole purpose of retrieving
irqchip_in_kernel.
Making the function inline in a header that is already included,
such as asm/kvm_host.h, is not possible because it needs to look at
struct kvm which is defined after asm/kvm_host.h is included. So add a
kvm_arch_irqchip_in_kernel non-inline function; irqchip_in_kernel() is
only performance critical on arm64 and x86, and the non-inline function
is enough on all other architectures.
irq.h can then be deleted from all architectures except x86.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Defer reprogramming counters and handling overflow via KVM_REQ_PMU
when incrementing counters. KVM skips emulated WRMSR in the VM-Exit
fastpath, the fastpath runs with IRQs disabled, skipping instructions
can increment and reprogram counters, reprogramming counters can
sleep, and sleeping is disallowed while IRQs are disabled.
[*] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
[*] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2981888, name: CPU 15/KVM
[*] preempt_count: 1, expected: 0
[*] RCU nest depth: 0, expected: 0
[*] INFO: lockdep is turned off.
[*] irq event stamp: 0
[*] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[*] hardirqs last disabled at (0): [<ffffffff8121222a>] copy_process+0x146a/0x62d0
[*] softirqs last enabled at (0): [<ffffffff81212269>] copy_process+0x14a9/0x62d0
[*] softirqs last disabled at (0): [<0000000000000000>] 0x0
[*] Preemption disabled at:
[*] [<ffffffffc2063fc1>] vcpu_enter_guest+0x1001/0x3dc0 [kvm]
[*] CPU: 17 PID: 2981888 Comm: CPU 15/KVM Kdump: 5.19.0-rc1-g239111db364c-dirty #2
[*] Call Trace:
[*] <TASK>
[*] dump_stack_lvl+0x6c/0x9b
[*] __might_resched.cold+0x22e/0x297
[*] __mutex_lock+0xc0/0x23b0
[*] perf_event_ctx_lock_nested+0x18f/0x340
[*] perf_event_pause+0x1a/0x110
[*] reprogram_counter+0x2af/0x1490 [kvm]
[*] kvm_pmu_trigger_event+0x429/0x950 [kvm]
[*] kvm_skip_emulated_instruction+0x48/0x90 [kvm]
[*] handle_fastpath_set_msr_irqoff+0x349/0x3b0 [kvm]
[*] vmx_vcpu_run+0x268e/0x3b80 [kvm_intel]
[*] vcpu_enter_guest+0x1d22/0x3dc0 [kvm]
Add a field to kvm_pmc to track the previous counter value in order
to defer overflow detection to kvm_pmu_handle_event() (the counter must
be paused before handling overflow, and that may increment the counter).
Opportunistically shrink sizeof(struct kvm_pmc) a bit.
Suggested-by: Wanpeng Li <[email protected]>
Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
Signed-off-by: Like Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: avoid re-triggering KVM_REQ_PMU on overflow, tweak changelog]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Batch reprogramming PMU counters by setting KVM_REQ_PMU and thus
deferring reprogramming kvm_pmu_handle_event() to avoid reprogramming
a counter multiple times during a single VM-Exit.
Deferring programming will also allow KVM to fix a bug where immediately
reprogramming a counter can result in sleeping (taking a mutex) while
interrupts are disabled in the VM-Exit fastpath.
Introduce kvm_pmu_request_counter_reprogam() to make it obvious that
KVM is _requesting_ a reprogram and not actually doing the reprogram.
Opportunistically refine related comments to avoid misunderstandings.
Signed-off-by: Like Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When reprogramming a counter, clear the counter's "reprogram pending" bit
if the counter is disabled (by the guest) or is disallowed (by the
userspace filter). In both cases, there's no need to re-attempt
programming on the next coincident KVM_REQ_PMU as enabling the counter by
either method will trigger reprogramming.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Force vCPUs to reprogram all counters on a PMU filter change to provide
a sane ABI for userspace. Use the existing KVM_REQ_PMU to do the
programming, and take advantage of the fact that the reprogram_pmi bitmap
fits in a u64 to set all bits in a single atomic update. Note, setting
the bitmap and making the request needs to be done _after_ the SRCU
synchronization to ensure that vCPUs will reprogram using the new filter.
KVM's current "lazy" approach is confusing and non-deterministic. It's
confusing because, from a developer perspective, the code is buggy as it
makes zero sense to let userspace modify the filter but then not actually
enforce the new filter. The lazy approach is non-deterministic because
KVM enforces the filter whenever a counter is reprogrammed, not just on
guest WRMSRs, i.e. a guest might gain/lose access to an event at random
times depending on what is going on in the host.
Note, the resulting behavior is still non-determinstic while the filter
is in flux. If userspace wants to guarantee deterministic behavior, all
vCPUs should be paused during the filter update.
Jim Mattson <[email protected]>
Fixes: 66bb8a065f5a ("KVM: x86: PMU Event Filter")
Cc: Aaron Lewis <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Extend the accounting sanity check in kvm_recover_nx_huge_pages() to the
TDP MMU, i.e. verify that zapping a shadow page unaccounts the disallowed
NX huge page regardless of the MMU type. Recovery runs while holding
mmu_lock for write and so it should be impossible to get false positives
on the WARN.
Suggested-by: Yan Zhao <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Explicitly check if a NX huge page is disallowed when determining if a
page fault needs to be forced to use a smaller sized page. KVM currently
assumes that the NX huge page mitigation is the only scenario where KVM
will force a shadow page instead of a huge page, and so unnecessarily
keeps an existing shadow page instead of replacing it with a huge page.
Any scenario that causes KVM to zap leaf SPTEs may result in having a SP
that can be made huge without violating the NX huge page mitigation.
E.g. prior to commit 5ba7c4c6d1c7 ("KVM: x86/MMU: Zap non-leaf SPTEs when
disabling dirty logging"), KVM would keep shadow pages after disabling
dirty logging due to a live migration being canceled, resulting in
degraded performance due to running with 4kb pages instead of huge pages.
Although the dirty logging case is "fixed", that fix is coincidental,
i.e. is an implementation detail, and there are other scenarios where KVM
will zap leaf SPTEs. E.g. zapping leaf SPTEs in response to a host page
migration (mmu_notifier invalidation) to create a huge page would yield a
similar result; KVM would see the shadow-present non-leaf SPTE and assume
a huge page is disallowed.
Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation")
Reviewed-by: Ben Gardon <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Mingwei Zhang <[email protected]>
[sean: use spte_to_child_sp(), massage changelog, fold into if-statement]
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Yan Zhao <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a helper to convert a SPTE to its shadow page to deduplicate a
variety of flows and hopefully avoid future bugs, e.g. if KVM attempts to
get the shadow page for a SPTE without dropping high bits.
Opportunistically add a comment in mmu_free_root_page() documenting why
it treats the root HPA as a SPTE.
No functional change intended.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Track the number of TDP MMU "shadow" pages instead of tracking the pages
themselves. With the NX huge page list manipulation moved out of the common
linking flow, elminating the list-based tracking means the happy path of
adding a shadow page doesn't need to acquire a spinlock and can instead
inc/dec an atomic.
Keep the tracking as the WARN during TDP MMU teardown on leaked shadow
pages is very, very useful for detecting KVM bugs.
Tracking the number of pages will also make it trivial to expose the
counter to userspace as a stat in the future, which may or may not be
desirable.
Note, the TDP MMU needs to use a separate counter (and stat if that ever
comes to be) from the existing n_used_mmu_pages. The TDP MMU doesn't bother
supporting the shrinker nor does it honor KVM_SET_NR_MMU_PAGES (because the
TDP MMU consumes so few pages relative to shadow paging), and including TDP
MMU pages in that counter would break both the shrinker and shadow MMUs,
e.g. if a VM is using nested TDP.
Cc: Yan Zhao <[email protected]>
Reviewed-by: Mingwei Zhang <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Yan Zhao <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Set nx_huge_page_disallowed in TDP MMU shadow pages before making the SP
visible to other readers, i.e. before setting its SPTE. This will allow
KVM to query the flag when determining if a shadow page can be replaced
by a NX huge page without violating the rules of the mitigation.
Note, the shadow/legacy MMU holds mmu_lock for write, so it's impossible
for another CPU to see a shadow page without an up-to-date
nx_huge_page_disallowed, i.e. only the TDP MMU needs the complicated
dance.
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Reviewed-by: Yan Zhao <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Account and track NX huge pages for nonpaging MMUs so that a future
enhancement to precisely check if a shadow page can't be replaced by a NX
huge page doesn't get false positives. Without correct tracking, KVM can
get stuck in a loop if an instruction is fetching and writing data on the
same huge page, e.g. KVM installs a small executable page on the fetch
fault, replaces it with an NX huge page on the write fault, and faults
again on the fetch.
Alternatively, and perhaps ideally, KVM would simply not enforce the
workaround for nonpaging MMUs. The guest has no page tables to abuse
and KVM is guaranteed to switch to a different MMU on CR0.PG being
toggled so there's no security or performance concerns. However, getting
make_spte() to play nice now and in the future is unnecessarily complex.
In the current code base, make_spte() can enforce the mitigation if TDP
is enabled or the MMU is indirect, but make_spte() may not always have a
vCPU/MMU to work with, e.g. if KVM were to support in-line huge page
promotion when disabling dirty logging.
Without a vCPU/MMU, KVM could either pass in the correct information
and/or derive it from the shadow page, but the former is ugly and the
latter subtly non-trivial due to the possibility of direct shadow pages
in indirect MMUs. Given that using shadow paging with an unpaged guest
is far from top priority _and_ has been subjected to the workaround since
its inception, keep it simple and just fix the accounting glitch.
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Reviewed-by: Mingwei Zhang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Rename most of the variables/functions involved in the NX huge page
mitigation to provide consistency, e.g. lpage vs huge page, and NX huge
vs huge NX, and also to provide clarity, e.g. to make it obvious the flag
applies only to the NX huge page mitigation, not to any condition that
prevents creating a huge page.
Add a comment explaining what the newly named "possible_nx_huge_pages"
tracks.
Leave the nx_lpage_splits stat alone as the name is ABI and thus set in
stone.
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Mingwei Zhang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Tag shadow pages that cannot be replaced with an NX huge page regardless
of whether or not zapping the page would allow KVM to immediately create
a huge page, e.g. because something else prevents creating a huge page.
I.e. track pages that are disallowed from being NX huge pages regardless
of whether or not the page could have been huge at the time of fault.
KVM currently tracks pages that were disallowed from being huge due to
the NX workaround if and only if the page could otherwise be huge. But
that fails to handled the scenario where whatever restriction prevented
KVM from installing a huge page goes away, e.g. if dirty logging is
disabled, the host mapping level changes, etc...
Failure to tag shadow pages appropriately could theoretically lead to
false negatives, e.g. if a fetch fault requests a small page and thus
isn't tracked, and a read/write fault later requests a huge page, KVM
will not reject the huge page as it should.
To avoid yet another flag, initialize the list_head and use list_empty()
to determine whether or not a page is on the list of NX huge pages that
should be recovered.
Note, the TDP MMU accounting is still flawed as fixing the TDP MMU is
more involved due to mmu_lock being held for read. This will be
addressed in a future commit.
Fixes: 5bcaf3e1715f ("KVM: x86/mmu: Account NX huge page disallowed iff huge page was requested")
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add the mask KVM_MSR_FILTER_RANGE_VALID_MASK for the flags in the
struct kvm_msr_filter_range. This simplifies checks that validate
these flags, and makes it easier to introduce new flags in the future.
No functional change intended.
Signed-off-by: Aaron Lewis <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add the mask KVM_MSR_FILTER_VALID_MASK for the flag in the struct
kvm_msr_filter. This makes it easier to introduce new flags in the
future.
No functional change intended.
Signed-off-by: Aaron Lewis <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add the mask KVM_MSR_EXIT_REASON_VALID_MASK for the MSR exit reason
flags. This simplifies checks that validate these flags, and makes it
easier to introduce new flags in the future.
No functional change intended.
Signed-off-by: Aaron Lewis <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Enable x86 slow page faults to be able to respond to non-fatal signals,
returning -EINTR properly when it happens.
Signed-off-by: Peter Xu <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a new "interruptible" flag showing that the caller is willing to be
interrupted by signals during the __gfn_to_pfn_memslot() request. Wire it
up with a FOLL_INTERRUPTIBLE flag that we've just introduced.
This prepares KVM to be able to respond to SIGUSR1 (for QEMU that's the
SIGIPI) even during e.g. handling an userfaultfd page fault.
No functional change intended.
Signed-off-by: Peter Xu <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When #SMI is asserted, the CPU can be in interrupt shadow due to sti or
mov ss.
It is not mandatory in Intel/AMD prm to have the #SMI blocked during the
shadow, and on top of that, since neither SVM nor VMX has true support
for SMI window, waiting for one instruction would mean single stepping
the guest.
Instead, allow #SMI in this case, but both reset the interrupt window and
stash its value in SMRAM to restore it on exit from SMM.
This fixes rare failures seen mostly on windows guests on VMX, when #SMI
falls on the sti instruction which mainfest in VM entry failure due
to EFLAGS.IF not being set, but STI interrupt window still being set
in the VMCS.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When the guest CPUID doesn't have support for long mode, 32 bit SMRAM
layout is used and it has no support for preserving EFER and/or SVM
state.
Note that this isn't relevant to running 32 bit guests on VM which is
long mode capable - such VM can still run 32 bit guests in compatibility
mode.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use SMM structs in the SVM code as well, which removes the last user of
put_smstate/GET_SMSTATE so remove these macros as well.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
if kvm_vcpu_map returns non zero value, error path should be triggered
regardless of the exact returned error value.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use kvm_smram_state_64 struct to save/restore the 64 bit SMM state
(used when X86_FEATURE_LM is present in the guest CPUID,
regardless of 32-bitness of the guest).
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use kvm_smram_state_32 struct to save/restore 32 bit SMM state
(used when X86_FEATURE_LM is not present in the guest CPUID).
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use kvm_smram union instad of raw arrays in the common smm code.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add structs that will be used to define and read/write the KVM's
SMRAM layout, instead of reading/writing to raw offsets.
Also document the differences between KVM's SMRAM layout and SMRAM
layout that is used by real Intel/AMD cpus.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
In the rare case of the failure on SMM entry, the KVM should at
least terminate the VM instead of going south.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The hidden processor flags HF_SMM_MASK and HF_SMM_INSIDE_NMI_MASK
are not needed if CONFIG_KVM_SMM is turned off. Remove the
definitions altogether and the code that uses them.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This allows making some fields optional, as will be the case soon
for SMM-related data.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This ensures that all the relevant code is compiled out, in fact
the process_smi stub can be removed too.
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Vendor-specific code that deals with SMI injection and saving/restoring
SMM state is not needed if CONFIG_KVM_SMM is disabled, so remove the
four callbacks smi_allowed, enter_smm, leave_smm and enable_smi_window.
The users in svm/nested.c and x86.c also have to be compiled out; the
amount of #ifdef'ed code is small and it's not worth moving it to
smm.c.
enter_smm is now used only within #ifdef CONFIG_KVM_SMM, and the stub
can therefore be removed.
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Some users of KVM implement the UEFI variable store through a paravirtual device
that does not require the "SMM lockbox" component of edk2; allow them to
compile out system management mode, which is not a full implementation
especially in how it interacts with nested virtualization.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Now that RSM is implemented in a single emulator callback, there is no
point in going through other callbacks for the sake of modifying
processor state. Just invoke KVM's own internal functions directly,
and remove the callbacks that were only used by em_rsm; the only
substantial difference is in the handling of the segment registers
and descriptor cache, which have to be parsed into a struct kvm_segment
instead of a struct desc_struct.
This also fixes a bug where emulator_set_segment was shifting the
limit left by 12 if the G bit is set, but the limit had not been
shifted right upon entry to SMM.
The emulator context is still used to restore EIP and the general
purpose registers.
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Some users of KVM implement the UEFI variable store through a paravirtual
device that does not require the "SMM lockbox" component of edk2, and
would like to compile out system management mode. In preparation for
that, move the SMM exit code out of emulate.c and into a new file.
The code is still written as a series of invocations of the emulator
callbacks, but the two exiting_smm and leave_smm callbacks are merged
into one, and all the code from em_rsm is now part of the callback.
This removes all knowledge of the format of the SMM save state area
from the emulator. Further patches will clean up the code and
invoke KVM's own functions to access control registers, descriptor
caches, etc.
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Some users of KVM implement the UEFI variable store through a paravirtual
device that does not require the "SMM lockbox" component of edk2, and
would like to compile out system management mode. In preparation for
that, move the SMM entry code out of x86.c and into a new file.
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Create a new header and source with code related to system management
mode emulation. Entry and exit will move there too; for now,
opportunistically rename put_smstate to PUT_SMSTATE while moving
it to smm.h, and adjust the SMM state saving code.
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Rename reserved fields on all structs in arch/x86/include/asm/svm.h
following their offset within the structs. Include compile time checks for
this in the same place where other BUILD_BUG_ON for the structs are.
This also solves that fields of struct sev_es_save_area are named by their
order of appearance, but right now they jump from reserved_5 to reserved_7.
Link: https://lkml.org/lkml/2022/10/22/376
Signed-off-by: Carlos Bilbao <[email protected]>
Message-Id: <[email protected]>
[Use ASSERT_STRUCT_OFFSET + fix a couple wrong offsets. - Paolo]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
ASSERT_STRUCT_OFFSET allows to assert during the build of
the kernel that a field in a struct have an expected offset.
KVM used to have such macro, but there is almost nothing KVM specific
in it so move it to build_bug.h, so that it can be used in other
places in KVM.
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|