aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kvm/vmx
AgeCommit message (Collapse)AuthorFilesLines
2022-04-13KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-EntrySean Christopherson1-5/+10
Don't modify vmcs12 exit fields except EXIT_REASON and EXIT_QUALIFICATION when performing a nested VM-Exit due to failed VM-Entry. Per the SDM, only the two aformentioned fields are filled and "All other VM-exit information fields are unmodified". Fixes: 4704d0befb07 ("KVM: nVMX: Exiting from L2 to L1") Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-13KVM: x86: Drop WARNs that assert a triple fault never "escapes" from L2Sean Christopherson1-3/+0
Remove WARNs that sanity check that KVM never lets a triple fault for L2 escape and incorrectly end up in L1. In normal operation, the sanity check is perfectly valid, but it incorrectly assumes that it's impossible for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through KVM_RUN (which guarantees kvm_check_nested_state() will see and handle the triple fault). The WARN can currently be triggered if userspace injects a machine check while L2 is active and CR4.MCE=0. And a future fix to allow save/restore of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't lost on migration, will make it trivially easy for userspace to trigger the WARN. Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is tempting, but wrong, especially if/when the request is saved/restored, e.g. if userspace restores events (including a triple fault) and then restores nested state (which may forcibly leave guest mode). Ignoring the fact that KVM doesn't currently provide the necessary APIs, it's userspace's responsibility to manage pending events during save/restore. ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Modules linked in: kvm_intel kvm irqbypass CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Call Trace: <TASK> vmx_leave_nested+0x30/0x40 [kvm_intel] vmx_set_nested_state+0xca/0x3e0 [kvm_intel] kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm] kvm_vcpu_ioctl+0x4b9/0x660 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- Fixes: cb6a32c2b877 ("KVM: x86: Handle triple fault in L2 without killing L1") Cc: [email protected] Cc: Chenyi Qiang <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-13KVM: x86: Move .pmu_ops to kvm_x86_init_ops and tag as __initdataLike Xu2-2/+2
The pmu_ops should be moved to kvm_x86_init_ops and tagged as __initdata. That'll save those precious few bytes, and more importantly make the original ops unreachable, i.e. make it harder to sneak in post-init modification bugs. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Like Xu <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-13KVM: x86/mmu: Derive EPT violation RWX bits from EPTE RWX bitsSean Christopherson1-3/+1
Derive the mask of RWX bits reported on EPT violations from the mask of RWX bits that are shoved into EPT entries; the layout is the same, the EPT violation bits are simply shifted by three. Use the new shift and a slight copy-paste of the mask derivation instead of completely open coding the same to convert between the EPT entry bits and the exit qualification when synthesizing a nested EPT Violation. No functional change intended. Cc: SU Hang <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-13kvm: vmx: remove redundant parenthesesPeng Hao1-1/+1
Remove redundant parentheses. Signed-off-by: Peng Hao <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-13Merge branch 'kvm-older-features' into HEADPaolo Bonzini1-1/+1
Merge branch for features that did not make it into 5.18: * New ioctls to get/set TSC frequency for a whole VM * Allow userspace to opt out of hypercall patching Nested virtualization improvements for AMD: * Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) * Allow AVIC to co-exist with a nested guest running * Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support * PAUSE filtering for nested hypervisors Guest support: * Decoupling of vcpu_is_preempted from PV spinlocks Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-19/+21
Pull kvm fixes from Paolo Bonzini: - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr - Documentation improvements - Prevent module exit until all VMs are freed - PMU Virtualization fixes - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences - Other miscellaneous bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: fix sending PV IPI KVM: x86/mmu: do compare-and-exchange of gPTE via the user address KVM: x86: Remove redundant vm_entry_controls_clearbit() call KVM: x86: cleanup enter_rmode() KVM: x86: SVM: fix tsc scaling when the host doesn't support it kvm: x86: SVM: remove unused defines KVM: x86: SVM: move tsc ratio definitions to svm.h KVM: x86: SVM: fix avic spec based definitions again KVM: MIPS: remove reference to trap&emulate virtualization KVM: x86: document limitations of MSR filtering KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr KVM: x86/emulator: Emulate RDPID only if it is enabled in guest KVM: x86/pmu: Fix and isolate TSX-specific performance event logic KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs KVM: x86: Trace all APICv inhibit changes and capture overall status KVM: x86: Add wrappers for setting/clearing APICv inhibits KVM: x86: Make APICv inhibit reasons an enum and cleanup naming KVM: X86: Handle implicit supervisor access with SMAP KVM: X86: Rename variable smap to not_smap in permission_fault() ...
2022-04-02KVM: VMX: Prepare VMCS setting for posted interrupt enabling when APICv is ↵Zeng Guang1-1/+1
available Currently KVM setup posted interrupt VMCS only depending on per-vcpu APICv activation status at the vCPU creation time. However, this status can be toggled dynamically under some circumstance. So potentially, later posted interrupt enabling may be problematic without VMCS readiness. To fix this, always settle the VMCS setting for posted interrupt as long as APICv is available and lapic locates in kernel. Signed-off-by: Zeng Guang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86: Remove redundant vm_entry_controls_clearbit() callZhenzhong Duan1-1/+0
When emulating exit from long mode, EFER_LMA is cleared with vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE again in exit_lmode() explicitly. In case EFER isn't supported by hardware, long mode isn't supported, so exit_lmode() cannot be reached. Note that, thanks to the shadow controls mechanism, this change doesn't eliminate vmread or vmwrite. Signed-off-by: Zhenzhong Duan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86: cleanup enter_rmode()Zhenzhong Duan1-9/+5
vmx_set_efer() sets uret->data but, in fact if the value of uret->data will be used vmx_setup_uret_msrs() will have rewritten it with the value returned by update_transition_efer(). uret->data is consumed if and only if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care of (a) updating uret->data before setting uret->load_into_hardware to true (b) setting uret->load_into_hardware to false if uret->data isn't updated. Opportunistically use "vmx" directly instead of redoing to_vmx(). Signed-off-by: Zhenzhong Duan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86: SVM: fix tsc scaling when the host doesn't support itMaxim Levitsky1-4/+3
It was decided that when TSC scaling is not supported, the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0' value. However in this case kvm_max_tsc_scaling_ratio is not set, which breaks various assumptions. Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of host support. For consistency, do the same for VMX. Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/pmu: Fix and isolate TSX-specific performance event logicLike Xu1-3/+10
HSW_IN_TX* bits are used in generic code which are not supported on AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence using HSW_IN_TX* bits unconditionally in generic code is resulting in unintentional pmu behavior on AMD. For example, if EventSelect[11:8] is 0x2, pmc_reprogram_counter() wrongly assumes that HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0. Also per the SDM, both bits 32 and 33 "may only be set if the processor supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set for IA32_PERFEVTSEL2." Opportunistically eliminate code redundancy, because if the HSW_IN_TX* bit is set in pmc->eventsel, it is already set in attr.config. Reported-by: Ravi Bangoria <[email protected]> Reported-by: Jim Mattson <[email protected]> Fixes: 103af0a98788 ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5") Co-developed-by: Ravi Bangoria <[email protected]> Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Like Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86: Make APICv inhibit reasons an enum and cleanup namingSean Christopherson1-2/+2
Use an enum for the APICv inhibit reasons, there is no meaning behind their values and they most definitely are not "unsigned longs". Rename the various params to "reason" for consistency and clarity (inhibit may be confused as a command, i.e. inhibit APICv, instead of the reason that is getting toggled/checked). No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-02KVM: x86/pmu: Use different raw event masks for AMD and IntelJim Mattson1-0/+1
The third nybble of AMD's event select overlaps with Intel's IN_TX and IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel platforms that support TSX. Declare a raw_event_mask in the kvm_pmu structure, initialize it in the vendor-specific pmu_refresh() functions, and use that mask for PERF_TYPE_RAW configurations in reprogram_gp_counter(). Fixes: 710c47651431 ("KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW") Signed-off-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-75/+80
Pull kvm updates from Paolo Bonzini: "ARM: - Proper emulation of the OSLock feature of the debug architecture - Scalibility improvements for the MMU lock when dirty logging is on - New VMID allocator, which will eventually help with SVA in VMs - Better support for PMUs in heterogenous systems - PSCI 1.1 support, enabling support for SYSTEM_RESET2 - Implement CONFIG_DEBUG_LIST at EL2 - Make CONFIG_ARM64_ERRATUM_2077057 default y - Reduce the overhead of VM exit when no interrupt is pending - Remove traces of 32bit ARM host support from the documentation - Updated vgic selftests - Various cleanups, doc updates and spelling fixes RISC-V: - Prevent KVM_COMPAT from being selected - Optimize __kvm_riscv_switch_to() implementation - RISC-V SBI v0.3 support s390: - memop selftest - fix SCK locking - adapter interruptions virtualization for secure guests - add Claudio Imbrenda as maintainer - first step to do proper storage key checking x86: - Continue switching kvm_x86_ops to static_call(); introduce static_call_cond() and __static_call_ret0 when applicable. - Cleanup unused arguments in several functions - Synthesize AMD 0x80000021 leaf - Fixes and optimization for Hyper-V sparse-bank hypercalls - Implement Hyper-V's enlightened MSR bitmap for nested SVM - Remove MMU auditing - Eager splitting of page tables (new aka "TDP" MMU only) when dirty page tracking is enabled - Cleanup the implementation of the guest PGD cache - Preparation for the implementation of Intel IPI virtualization - Fix some segment descriptor checks in the emulator - Allow AMD AVIC support on systems with physical APIC ID above 255 - Better API to disable virtualization quirks - Fixes and optimizations for the zapping of page tables: - Zap roots in two passes, avoiding RCU read-side critical sections that last too long for very large guests backed by 4 KiB SPTEs. - Zap invalid and defunct roots asynchronously via concurrency-managed work queue. - Allowing yielding when zapping TDP MMU roots in response to the root's last reference being put. - Batch more TLB flushes with an RCU trick. Whoever frees the paging structure now holds RCU as a proxy for all vCPUs running in the guest, i.e. to prolongs the grace period on their behalf. It then kicks the the vCPUs out of guest mode before doing rcu_read_unlock(). Generic: - Introduce __vcalloc and use it for very large allocations that need memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits) KVM: use kvcalloc for array allocations KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2 kvm: x86: Require const tsc for RT KVM: x86: synthesize CPUID leaf 0x80000021h if useful KVM: x86: add support for CPUID leaf 0x80000021 KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()" kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU KVM: arm64: fix typos in comments KVM: arm64: Generalise VM features into a set of flags KVM: s390: selftests: Add error memop tests KVM: s390: selftests: Add more copy memop tests KVM: s390: selftests: Add named stages for memop test KVM: s390: selftests: Add macro as abstraction for MEM_OP KVM: s390: selftests: Split memop tests KVM: s390x: fix SCK locking RISC-V: KVM: Implement SBI HSM suspend call RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function RISC-V: Add SBI HSM suspend related defines RISC-V: KVM: Implement SBI v0.3 SRST extension ...
2022-03-22Merge tag 'perf-core-2022-03-21' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event updates from Ingo Molnar: - Fix address filtering for Intel/PT,ARM/CoreSight - Enable Intel/PEBS format 5 - Allow more fixed-function counters for x86 - Intel/PT: Enable not recording Taken-Not-Taken packets - Add a few branch-types * tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix the build on !CONFIG_PHYS_ADDR_T_64BIT perf: Add irq and exception return branch types perf/x86/intel/uncore: Make uncore_discovery clean for 64 bit addresses perf/x86/intel/pt: Add a capability and config bit for disabling TNTs perf/x86/intel/pt: Add a capability and config bit for event tracing perf/x86/intel: Increase max number of the fixed counters KVM: x86: use the KVM side max supported fixed counter perf/x86/intel: Enable PEBS format 5 perf/core: Allow kernel address filter when not filtering the kernel perf/x86/intel/pt: Fix address filter config for 32-bit kernel perf/core: Fix address filter parser for multiple filters x86: Share definition of __is_canonical_address() perf/x86/intel/pt: Relax address filter validation
2022-03-04Merge branch 'kvm-bugfixes' into HEADPaolo Bonzini3-17/+27
Merge bugfixes from 5.17 before merging more tricky work.
2022-03-01KVM: VMX: Handle APIC-write offset wrangling in VMX codeSean Christopherson1-2/+9
Move the vAPIC offset adjustments done in the APIC-write trap path from common x86 to VMX in anticipation of using the nodecode path for SVM's AVIC. The adjustment reflects hardware behavior, i.e. it's technically a property of VMX, no common x86. SVM's AVIC behavior is identical, so it's a bit of a moot point, the goal is purely to make it easier to understand why the adjustment is ok. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: x86/mmu: load new PGD after the shadow MMU is initializedPaolo Bonzini1-3/+3
Now that __kvm_mmu_new_pgd does not look at the MMU's root_level and shadow_root_level anymore, pull the PGD load after the initialization of the shadow MMUs. Besides being more intuitive, this enables future simplifications and optimizations because it's not necessary anymore to compute the role outside kvm_init_mmu. In particular, kvm_mmu_reset_context was not attempting to use a cached PGD to avoid having to figure out the new role. With this change, it could follow what nested_{vmx,svm}_load_cr3 are doing, and avoid unloading all the cached roots. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: x86/mmu: do not pass vcpu to root freeing functionsPaolo Bonzini1-4/+4
These functions only operate on a given MMU, of which there is more than one in a vCPU (we care about two, because the third does not have any roots and is only used to walk guest page tables). They do need a struct kvm in order to lock the mmu_lock, but they do not needed anything else in the struct kvm_vcpu. So, pass the vcpu->kvm directly to them. Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: x86: use struct kvm_mmu_root_info for mmu->rootPaolo Bonzini2-2/+2
The root_hpa and root_pgd fields form essentially a struct kvm_mmu_root_info. Use the struct to have more consistency between mmu->root and mmu->prev_roots. The patch is entirely search and replace except for cached_root_available, which does not need a temporary struct kvm_mmu_root_info anymore. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: x86: Provide per VM capability for disabling PMU virtualizationDavid Dunn1-1/+1
Add a new capability, KVM_CAP_PMU_CAPABILITY, that takes a bitmask of settings/features to allow userspace to configure PMU virtualization on a per-VM basis. For now, support a single flag, KVM_PMU_CAP_DISABLE, to allow disabling PMU virtualization for a VM even when KVM is configured with enable_pmu=true a module level. To keep KVM simple, disallow changing VM's PMU configuration after vCPUs have been created. Signed-off-by: David Dunn <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: VMX: Remove scratch 'cpu' variable that shadows an identical scratch varPeng Hao1-1/+0
From: Peng Hao <[email protected]> Remove a redundant 'cpu' declaration from inside an if-statement that that shadows an identical declaration at function scope. Both variables are used as scratch variables in for_each_*_cpu() loops, thus there's no harm in sharing a variable. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Peng Hao <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25kvm: vmx: Fix typos comment in __loaded_vmcs_clear()Peng Hao1-4/+4
Fix a comment documenting the memory barrier related to clearing a loaded_vmcs; loaded_vmcs tracks the host CPU the VMCS is loaded on via the field 'cpu', it doesn't have a 'vcpu' field. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Peng Hao <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: nVMX: Make setup/unsetup under the same conditionsPeng Hao1-1/+1
Make sure nested_vmx_hardware_setup/unsetup() are called in pairs under the same conditions. Calling nested_vmx_hardware_unsetup() when nested is false "works" right now because it only calls free_page() on zero- initialized pointers, but it's possible that more code will be added to nested_vmx_hardware_unsetup() in the future. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Peng Hao <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"Sean Christopherson2-11/+21
Revert back to refreshing vmcs.HOST_CR3 immediately prior to VM-Enter. The PCID (ASID) part of CR3 can be bumped without KVM being scheduled out, as the kernel will switch CR3 during __text_poke(), e.g. in response to a static key toggling. If switch_mm_irqs_off() chooses a new ASID for the mm associate with KVM, KVM will do VM-Enter => VM-Exit with a stale vmcs.HOST_CR3. Add a comment to explain why KVM must wait until VM-Enter is imminent to refresh vmcs.HOST_CR3. The following splat was captured by stashing vmcs.HOST_CR3 in kvm_vcpu and adding a WARN in load_new_mm_cr3() to fire if a new ASID is being loaded for the KVM-associated mm while KVM has a "running" vCPU: static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush) { struct kvm_vcpu *vcpu = kvm_get_running_vcpu(); ... WARN(vcpu && (vcpu->cr3 & GENMASK(11, 0)) != (new_mm_cr3 & GENMASK(11, 0)) && (vcpu->cr3 & PHYSICAL_PAGE_MASK) == (new_mm_cr3 & PHYSICAL_PAGE_MASK), "KVM is hosed, loading CR3 = %lx, vmcs.HOST_CR3 = %lx", new_mm_cr3, vcpu->cr3); } ------------[ cut here ]------------ KVM is hosed, loading CR3 = 8000000105393004, vmcs.HOST_CR3 = 105393003 WARNING: CPU: 4 PID: 20717 at arch/x86/mm/tlb.c:291 load_new_mm_cr3+0x82/0xe0 Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel CPU: 4 PID: 20717 Comm: stable Tainted: G W 5.17.0-rc3+ #747 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:load_new_mm_cr3+0x82/0xe0 RSP: 0018:ffffc9000489fa98 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 8000000105393004 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277d1b788 RBP: 0000000000000004 R08: ffff888277d1b780 R09: ffffc9000489f8b8 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88810678a800 R14: 0000000000000004 R15: 0000000000000c33 FS: 00007fa9f0e72700(0000) GS:ffff888277d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001001b5003 CR4: 0000000000172ea0 Call Trace: <TASK> switch_mm_irqs_off+0x1cb/0x460 __text_poke+0x308/0x3e0 text_poke_bp_batch+0x168/0x220 text_poke_finish+0x1b/0x30 arch_jump_label_transform_apply+0x18/0x30 static_key_slow_inc_cpuslocked+0x7c/0x90 static_key_slow_inc+0x16/0x20 kvm_lapic_set_base+0x116/0x190 kvm_set_apic_base+0xa5/0xe0 kvm_set_msr_common+0x2f4/0xf60 vmx_set_msr+0x355/0xe70 [kvm_intel] kvm_set_msr_ignored_check+0x91/0x230 kvm_emulate_wrmsr+0x36/0x120 vmx_handle_exit+0x609/0x6c0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x146f/0x1b80 kvm_vcpu_ioctl+0x279/0x690 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- This reverts commit 15ad9762d69fd8e40a4a51828c1d6b0c1b8fbea0. Fixes: 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") Reported-by: Wanpeng Li <[email protected]> Cc: Lai Jiangshan <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Acked-by: Lai Jiangshan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"Sean Christopherson3-14/+14
Undo a nested VMX fix as a step toward reverting the commit it fixed, 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"), as the underlying premise that "host CR3 in the vcpu thread can only be changed when scheduling" is wrong. This reverts commit a9f2705ec84449e3b8d70c804766f8e97e23080d. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-18KVM: x86: return 1 unconditionally for availability of KVM_CAP_VAPICPaolo Bonzini1-6/+0
The two ioctls used to implement userspace-accelerated TPR, KVM_TPR_ACCESS_REPORTING and KVM_SET_VAPIC_ADDR, are available even if hardware-accelerated TPR can be used. So there is no reason not to report KVM_CAP_VAPIC. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-10KVM: VMX: Use local pointer to vcpu_vmx in vmx_vcpu_after_set_cpuid()Oliver Upton1-2/+2
There is a local that contains a pointer to vcpu_vmx already. Just use that instead to get at the structure directly instead of doing pointer arithmetic. No functional change intended. Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-10KVM: VMX: Dont' send posted IRQ if vCPU == this vCPU and vCPU is IN_GUEST_MODEWanpeng Li1-19/+21
When delivering a virtual interrupt, don't actually send a posted interrupt if the target vCPU is also the currently running vCPU and is IN_GUEST_MODE, in which case the interrupt is being sent from a VM-Exit fastpath and the core run loop in vcpu_enter_guest() will manually move the interrupt from the PIR to vmcs.GUEST_RVI. IRQs are disabled while IN_GUEST_MODE, thus there's no possibility of the virtual interrupt being sent from anything other than KVM, i.e. KVM won't suppress a wake event from an IRQ handler (see commit fdba608f15e2, "KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU"). Eliding the posted interrupt restores the performance provided by the combination of commits 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") and 26efe2fd92e5 ("KVM: VMX: Handle preemption timer fastpath"). Thanks Sean for better comments. Suggested-by: Chao Gao <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-10KVM: VMX: Rename VMX functions to conform to kvm_x86_ops namesSean Christopherson3-18/+18
Massage VMX's implementation names for kvm_x86_ops to maximize use of kvm-x86-ops.h. Leave cpu_has_vmx_wbinvd_exit() as-is to preserve the cpu_has_vmx_*() pattern used for querying VMCS capabilities. Keep pi_has_pending_interrupt() as vmx_dy_apicv_has_pending_interrupt() does a poor job of describing exactly what is being checked in VMX land. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-10KVM: nVMX: Refactor PMU refresh to avoid referencing kvm_x86_ops.pmu_opsSean Christopherson3-4/+7
Refactor the nested VMX PMU refresh helper to pass it a flag stating whether or not the vCPU has PERF_GLOBAL_CTRL instead of having the nVMX helper query the information by bouncing through kvm_x86_ops.pmu_ops. This will allow a future patch to use static_call() for the PMU ops without having to export any static call definitions from common x86, and it is also a step toward unexported kvm_x86_ops. Alternatively, nVMX could call kvm_pmu_is_valid_msr() to indirectly use kvm_x86_ops.pmu_ops, but that would incur an extra layer of indirection and would require exporting kvm_pmu_is_valid_msr(). Opportunistically rename the helper to keep line lengths somewhat reasonable, and to better capture its high-level role. No functional change intended. Cc: Like Xu <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-10KVM: VMX: Call vmx_get_cpl() directly in handle_dr()Sean Christopherson1-1/+1
Use vmx_get_cpl() instead of bouncing through kvm_x86_ops.get_cpl() when performing a CPL check on MOV DR accesses. This avoids a RETPOLINE (when enabled), and more importantly removes a vendor reference to kvm_x86_ops and helps pave the way for unexporting kvm_x86_ops. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-10KVM: x86: Rename kvm_x86_ops pointers to align w/ preferred vendor namesSean Christopherson1-10/+10
Rename a variety of kvm_x86_op function pointers so that preferred name for vendor implementations follows the pattern <vendor>_<function>, e.g. rename .run() to .vcpu_run() to match {svm,vmx}_vcpu_run(). This will allow vendor implementations to be wired up via the KVM_X86_OP macro. In many cases, VMX and SVM "disagree" on the preferred name, though in reality it's VMX and x86 that disagree as SVM blindly prepended _svm to the kvm_x86_ops name. Justification for using the VMX nomenclature: - set_{irq,nmi} => inject_{irq,nmi} because the helper is injecting an event that has already been "set" in e.g. the vIRR. SVM's relevant VMCB field is even named event_inj, and KVM's stat is irq_injections. - prepare_guest_switch => prepare_switch_to_guest because the former is ambiguous, e.g. it could mean switching between multiple guests, switching from the guest to host, etc... - update_pi_irte => pi_update_irte to allow for matching match the rest of VMX's posted interrupt naming scheme, which is vmx_pi_<blah>(). - start_assignment => pi_start_assignment to again follow VMX's posted interrupt naming scheme, and to provide context for what bit of code might care about an otherwise undescribed "assignment". The "tlb_flush" => "flush_tlb" creates an inconsistency with respect to Hyper-V's "tlb_remote_flush" hooks, but Hyper-V really is the one that's wrong. x86, VMX, and SVM all use flush_tlb, and even common KVM is on a variant of the bandwagon with "kvm_flush_remote_tlbs", e.g. a more appropriate name for the Hyper-V hooks would be flush_remote_tlbs. Leave that change for another time as the Hyper-V hooks always start as NULL, i.e. the name doesn't matter for using kvm-x86-ops.h, and changing all names requires an astounding amount of churn. VMX and SVM function names are intentionally left as is to minimize the diff. Both VMX and SVM will need to rename even more functions in order to fully utilize KVM_X86_OPS, i.e. an additional patch for each is inevitable. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-08KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSMMaxim Levitsky1-0/+1
While RSM induced VM entries are not full VM entries, they still need to be followed by actual VM entry to complete it, unlike setting the nested state. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM, which fail due to this issue combined with lack of dirty bit setting. Signed-off-by: Maxim Levitsky <[email protected]> Cc: [email protected] Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-05Merge tag 'kvmarm-fixes-5.17-2' of ↵Paolo Bonzini3-17/+38
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #2 - A couple of fixes when handling an exception while a SError has been delivered - Workaround for Cortex-A510's single-step[ erratum
2022-02-02KVM: x86: use the KVM side max supported fixed counterWei Wang1-2/+2
KVM vPMU doesn't support to emulate all the fixed counters that the host PMU driver has supported, e.g. the fixed counter 3 used by Topdown metrics hasn't been supported by KVM so far. Rename MAX_FIXED_COUNTERS to KVM_PMC_MAX_FIXED to have a more straightforward naming convention as INTEL_PMC_MAX_FIXED used by the host PMU driver, and fix vPMU to use the KVM side KVM_PMC_MAX_FIXED for the virtual fixed counter emulation, instead of the host side INTEL_PMC_MAX_FIXED. Signed-off-by: Wei Wang <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2022-02-01kvm/x86: rework guest entry logicMark Rutland1-2/+2
For consistency and clarity, migrate x86 over to the generic helpers for guest timing and lockdep/RCU/tracing management, and remove the x86-specific helpers. Prior to this patch, the guest timing was entered in kvm_guest_enter_irqoff() (called by svm_vcpu_enter_exit() and svm_vcpu_enter_exit()), and was exited by the call to vtime_account_guest_exit() within vcpu_enter_guest(). To minimize duplication and to more clearly balance entry and exit, both entry and exit of guest timing are placed in vcpu_enter_guest(), using the new guest_timing_{enter,exit}_irqoff() helpers. When context tracking is used a small amount of additional time will be accounted towards guests; tick-based accounting is unnaffected as IRQs are disabled at this point and not enabled until after the return from the guest. This also corrects (benign) mis-balanced context tracking accounting introduced in commits: ae95f566b3d22ade ("KVM: X86: TSCDEADLINE MSR emulation fastpath") 26efe2fd92e50822 ("KVM: VMX: Handle preemption timer fastpath") Where KVM can enter a guest multiple times, calling vtime_guest_enter() without a corresponding call to vtime_account_guest_exit(), and with vtime_account_system() called when vtime_account_guest() should be used. As account_system_time() checks PF_VCPU and calls account_guest_time(), this doesn't result in any functional problem, but is unnecessarily confusing. Signed-off-by: Mark Rutland <[email protected]> Acked-by: Paolo Bonzini <[email protected]> Reviewed-by: Nicolas Saenz Julienne <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jim Mattson <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vitaly Kuznetsov <[email protected]> Cc: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-01KVM: x86: Move delivery of non-APICv interrupt into vendor codeSean Christopherson1-1/+16
Handle non-APICv interrupt delivery in vendor code, even though it means VMX and SVM will temporarily have duplicate code. SVM's AVIC has a race condition that requires KVM to fall back to legacy interrupt injection _after_ the interrupt has been logged in the vIRR, i.e. to fix the race, SVM will need to open code the full flow anyways[*]. Refactor the code so that the SVM bug without introducing other issues, e.g. SVM would return "success" and thus invoke trace_kvm_apicv_accept_irq() even when delivery through the AVIC failed, and to opportunistically prepare for using KVM_X86_OP to fill each vendor's kvm_x86_ops struct, which will rely on the vendor function matching the kvm_x86_op pointer name. No functional change intended. [*] https://lore.kernel.org/all/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds7-54/+138
Pull kvm fixes from Paolo Bonzini: "Two larger x86 series: - Redo incorrect fix for SEV/SMAP erratum - Windows 11 Hyper-V workaround Other x86 changes: - Various x86 cleanups - Re-enable access_tracking_perf_test - Fix for #GP handling on SVM - Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID - Fix for ICEBP in interrupt shadow - Avoid false-positive RCU splat - Enable Enlightened MSR-Bitmap support for real ARM: - Correctly update the shadow register on exception injection when running in nVHE mode - Correctly use the mm_ops indirection when performing cache invalidation from the page-table walker - Restrict the vgic-v3 workaround for SEIS to the two known broken implementations Generic code changes: - Dead code cleanup" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits) KVM: eventfd: Fix false positive RCU usage warning KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread() KVM: nVMX: Rename vmcs_to_field_offset{,_table} KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP KVM: x86: add system attribute to retrieve full set of supported xsave states KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr selftests: kvm: move vm_xsave_req_perm call to amx_test KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS KVM: x86: Keep MSR_IA32_XSS unchanged for INIT KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2} KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02 KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest KVM: x86: Check .flags in kvm_cpuid_check_equal() too KVM: x86: Forcibly leave nested virt when SMM state is toggled KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments() KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real ...
2022-01-28KVM: nVMX: Allow VMREAD when Enlightened VMCS is in useVitaly Kuznetsov2-16/+51
Hyper-V TLFS explicitly forbids VMREAD and VMWRITE instructions when Enlightened VMCS interface is in use: "Any VMREAD or VMWRITE instructions while an enlightened VMCS is active is unsupported and can result in unexpected behavior."" Windows 11 + WSL2 seems to ignore this, attempts to VMREAD VMCS field 0x4404 ("VM-exit interruption information") are observed. Failing these attempts with nested_vmx_failInvalid() makes such guests unbootable. Microsoft confirms this is a Hyper-V bug and claims that it'll get fixed eventually but for the time being we need a workaround. (Temporary) allow VMREAD to get data from the currently loaded Enlightened VMCS. Note: VMWRITE instructions remain forbidden, it is not clear how to handle them properly and hopefully won't ever be needed. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-28KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()Vitaly Kuznetsov2-10/+25
In preparation to allowing reads from Enlightened VMCS from handle_vmread(), implement evmcs_field_offset() to get the correct read offset. get_evmcs_offset(), which is being used by KVM-on-Hyper-V, is almost what's needed but a few things need to be adjusted. First, WARN_ON() is unacceptable for handle_vmread() as any field can (in theory) be supplied by the guest and not all fields are defined in eVMCS v1. Second, we need to handle 'holes' in eVMCS (missing fields). It also sounds like a good idea to WARN_ON() if such fields are ever accessed by KVM-on-Hyper-V. Implement dedicated evmcs_field_offset() helper. No functional change intended. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-28KVM: nVMX: Rename vmcs_to_field_offset{,_table}Vitaly Kuznetsov3-8/+8
vmcs_to_field_offset{,_table} may sound misleading as VMCS is an opaque blob which is not supposed to be accessed directly. In fact, vmcs_to_field_offset{,_table} are related to KVM defined VMCS12 structure. Rename vmcs_field_to_offset() to get_vmcs12_field_offset() for clarity. No functional change intended. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-28KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMERVitaly Kuznetsov1-1/+3
Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field, PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too. Note, none of the currently existing Windows/Hyper-V versions are known to enable 'save VMX-preemption timer value' when eVMCS is in use, the change is aimed at making the filtering future proof. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-28KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCSVitaly Kuznetsov1-0/+1
Similar to MSR_IA32_VMX_EXIT_CTLS/MSR_IA32_VMX_TRUE_EXIT_CTLS, MSR_IA32_VMX_ENTRY_CTLS/MSR_IA32_VMX_TRUE_ENTRY_CTLS pair, MSR_IA32_VMX_TRUE_PINBASED_CTLS needs to be filtered the same way MSR_IA32_VMX_PINBASED_CTLS is currently filtered as guests may solely rely on 'true' MSR data. Note, none of the currently existing Windows/Hyper-V versions are known to stumble upon the unfiltered MSR_IA32_VMX_TRUE_PINBASED_CTLS, the change is aimed at making the filtering future proof. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-26KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02Sean Christopherson1-10/+12
WARN if KVM attempts to allocate a shadow VMCS for vmcs02. KVM emulates VMCS shadowing but doesn't virtualize it, i.e. KVM should never allocate a "real" shadow VMCS for L2. The previous code WARNed but continued anyway with the allocation, presumably in an attempt to avoid NULL pointer dereference. However, alloc_vmcs (and hence alloc_shadow_vmcs) can fail, and indeed the sole caller does: if (enable_shadow_vmcs && !alloc_shadow_vmcs(vcpu)) goto out_shadow_vmcs; which makes it not a useful attempt. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-26KVM: x86: Forcibly leave nested virt when SMM state is toggledSean Christopherson1-0/+1
Forcibly leave nested virtualization operation if userspace toggles SMM state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace forces the vCPU out of SMM while it's post-VMXON and then injects an SMI, vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both vmxon=false and smm.vmxon=false, but all other nVMX state allocated. Don't attempt to gracefully handle the transition as (a) most transitions are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't sufficient information to handle all transitions, e.g. SVM wants access to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede KVM_SET_NESTED_STATE during state restore as the latter disallows putting the vCPU into L2 if SMM is active, and disallows tagging the vCPU as being post-VMXON in SMM if SMM is not active. Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU in an architecturally impossible state. WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Modules linked in: CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00 Call Trace: <TASK> kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline] kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460 kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline] kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline] kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250 kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273 __fput+0x286/0x9f0 fs/file_table.c:311 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0xb29/0x2a30 kernel/exit.c:806 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 get_signal+0x4b0/0x28c0 kernel/signal.c:2862 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Cc: [email protected] Reported-by: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-26KVM: x86: Pass emulation type to can_emulate_instruction()Sean Christopherson1-3/+4
Pass the emulation type to kvm_x86_ops.can_emulate_insutrction() so that a future commit can harden KVM's SEV support to WARN on emulation scenarios that should never happen. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Liam Merwick <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-26KVM: VMX: Remove vmcs_config.orderJim Mattson2-4/+2
The maximum size of a VMCS (or VMXON region) is 4096. By definition, these are order 0 allocations. Signed-off-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-25KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadowSean Christopherson1-0/+25
Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or MOVSS blocking is active. Setting the flag is necessary to make VM-Entry consistency checks happy, as VMX has an invariant that if RFLAGS.TF is set and STI/MOVSS blocking is true, then the previous instruction must have been STI or MOV/POP, and therefore a single-step #DB must be pending since the RFLAGS.TF cannot have been set by the previous instruction, i.e. the one instruction delay after setting RFLAGS.TF must have already expired. Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately when recording guest state as part of a VM-Exit, but #DB VM-Exits intentionally do not treat the #DB as "guest state" as interception of the #DB effectively makes the #DB host-owned, thus KVM needs to manually set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest. Note, although this bug can be triggered by guest userspace, doing so requires IOPL=3, and guest userspace running with IOPL=3 has full access to all I/O ports (from the guest's perspective) and can crash/reboot the guest any number of ways. IOPL=3 is required because STI blocking kicks in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF. MOVSS blocking can be initiated by userspace, but can be coincident with a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is executed in the MOVSS shadow. MOV DR #GPs at CPL>0, thus MOVSS blocking is problematic only for CPL0 (and only if the guest is crazy enough to access a DR in a MOVSS shadow). All other sources of #DBs are either suppressed by MOVSS blocking (single-step, code fetch, data, and I/O), are mutually exclusive with MOVSS blocking (T-bit task switch), or are already handled by KVM (ICEBP, a.k.a. INT1). This bug was originally found by running tests[1] created for XSA-308[2]. Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is presumably why the Xen bug was deemed to be an exploitable DOS from guest userspace. KVM already handles ICEBP by skipping the ICEBP instruction and thus clears MOVSS blocking as a side effect of its "emulation". [1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html [2] https://xenbits.xen.org/xsa/advisory-308.html Reported-by: David Woodhouse <[email protected]> Reported-by: Alexander Graf <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.