aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kvm/svm
AgeCommit message (Collapse)AuthorFilesLines
2023-01-13KVM: SVM: Flush the "current" TLB when activating AVICSean Christopherson1-0/+6
Flush the TLB when activating AVIC as the CPU can insert into the TLB while AVIC is "locally" disabled. KVM doesn't treat "APIC hardware disabled" as VM-wide AVIC inhibition, and so when a vCPU has its APIC hardware disabled, AVIC is not guaranteed to be inhibited. As a result, KVM may create a valid NPT mapping for the APIC base, which the CPU can cache as a non-AVIC translation. Note, Intel handles this in vmx_set_virtual_apic_mode(). Reviewed-by: Paolo Bonzini <[email protected]> Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-01-09KVM: nSVM: clarify recalc_intercepts() wrt CR8Paolo Bonzini1-7/+5
The mysterious comment "We only want the cr8 intercept bits of L1" dates back to basically the introduction of nested SVM, back when the handling of "less typical" hypervisors was very haphazard. With the development of kvm-unit-tests for interrupt handling, the same code grew another vmcb_clr_intercept for the interrupt window (VINTR) vmexit, this time with a comment that is at least decent. It turns out however that the same comment applies to the CR8 write intercept, which is also a "recheck if an interrupt should be injected" intercept. The CR8 read intercept instead has not been used by KVM for 14 years (commit 649d68643ebf, "KVM: SVM: sync TPR value to V_TPR field in the VMCB"), so do not bother clearing it and let one comment describe both CR8 write and VINTR handling. Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: x86: Do compatibility checks when onlining CPUChao Gao1-5/+3
Do compatibility checks when enabling hardware to effectively add compatibility checks when onlining a CPU. Abort enabling, i.e. the online process, if the (hotplugged) CPU is incompatible with the known good setup. At init time, KVM does compatibility checks to ensure that all online CPUs support hardware virtualization and a common set of features. But KVM uses hotplugged CPUs without such compatibility checks. On Intel CPUs, this leads to #GP if the hotplugged CPU doesn't support VMX, or VM-Entry failure if the hotplugged CPU doesn't support all features enabled by KVM. Note, this is little more than a NOP on SVM, as SVM already checks for full SVM support during hardware enabling. Opportunistically add a pr_err() if setup_vmcs_config() fails, and tweak all error messages to output which CPU failed. Signed-off-by: Chao Gao <[email protected]> Co-developed-by: Sean Christopherson <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Acked-by: Kai Huang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: x86: Move CPU compat checks hook to kvm_x86_ops (from kvm_x86_init_ops)Sean Christopherson1-2/+3
Move the .check_processor_compatibility() callback from kvm_x86_init_ops to kvm_x86_ops to allow a future patch to do compatibility checks during CPU hotplug. Do kvm_ops_update() before compat checks so that static_call() can be used during compat checks. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Kai Huang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: SVM: Check for SVM support in CPU compatibility checksSean Christopherson1-5/+8
Check that SVM is supported and enabled in the processor compatibility checks. SVM already checks for support during hardware enabling, i.e. this doesn't really add new functionality. The net effect is that KVM will refuse to load if a CPU doesn't have SVM fully enabled, as opposed to failing KVM_CREATE_VM. Opportunistically move svm_check_processor_compat() up in svm.c so that it can be invoked during hardware enabling in a future patch. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: x86: Do VMX/SVM support checks directly in vendor codeSean Christopherson1-21/+17
Do basic VMX/SVM support checks directly in vendor code instead of implementing them via kvm_x86_ops hooks. Beyond the superficial benefit of providing common messages, which isn't even clearly a net positive since vendor code can provide more precise/detailed messages, there's zero advantage to bouncing through common x86 code. Consolidating the checks will also simplify performing the checks across all CPUs (in a future patch). Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: x86: Unify pr_fmt to use module name for all KVM modulesSean Christopherson7-9/+13
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks use consistent formatting across common x86, Intel, and AMD code. In addition to providing consistent print formatting, using KBUILD_MODNAME, e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and SGX and ...) as technologies without generating weird messages, and without causing naming conflicts with other kernel code, e.g. "SEV: ", "tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems. Opportunistically move away from printk() for prints that need to be modified anyways, e.g. to drop a manual "kvm: " prefix. Opportunistically convert a few SGX WARNs that are similarly modified to WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good that they would fire repeatedly and spam the kernel log without providing unique information in each print. Note, defining pr_fmt yields undesirable results for code that uses KVM's printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's wrappers is relatively limited in KVM x86 code. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: x86: Use KBUILD_MODNAME to specify vendor module nameSean Christopherson1-1/+1
Use KBUILD_MODNAME to specify the vendor module name instead of manually writing out the name to make it a bit more obvious that the name isn't completely arbitrary. A future patch will also use KBUILD_MODNAME to define pr_fmt, at which point using KBUILD_MODNAME for kvm_x86_ops.name further reinforces the intended usage of kvm_x86_ops.name. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: Drop kvm_arch_check_processor_compat() hookSean Christopherson1-2/+2
Drop kvm_arch_check_processor_compat() and its support code now that all architecture implementations are nops. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Reviewed-by: Eric Farman <[email protected]> # s390 Acked-by: Anup Patel <[email protected]> Reviewed-by: Kai Huang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: x86: Do CPU compatibility checks in x86 codeSean Christopherson1-1/+1
Move the CPU compatibility checks to pure x86 code, i.e. drop x86's use of the common kvm_x86_check_cpu_compat() arch hook. x86 is the only architecture that "needs" to do per-CPU compatibility checks, moving the logic to x86 will allow dropping the common code, and will also give x86 more control over when/how the compatibility checks are performed, e.g. TDX will need to enable hardware (do VMXON) in order to perform compatibility checks. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Isaku Yamahata <[email protected]> Reviewed-by: Kai Huang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-29KVM: x86: Move guts of kvm_arch_init() to standalone helperSean Christopherson1-2/+21
Move the guts of kvm_arch_init() to a new helper, kvm_x86_vendor_init(), so that VMX can do _all_ arch and vendor initialization before calling kvm_init(). Calling kvm_init() must be the _very_ last step during init, as kvm_init() exposes /dev/kvm to userspace, i.e. allows creating VMs. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-12-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-71/+160
Pull kvm updates from Paolo Bonzini: "ARM64: - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a97d: "Fix a number of issues with MTE, such as races on the tags being initialised vs the PG_mte_tagged flag as well as the lack of support for VM_SHARED when KVM is involved. Patches from Catalin Marinas and Peter Collingbourne"). - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. s390: - Second batch of the lazy destroy patches - First batch of KVM changes for kernel virtual != physical address support - Removal of a unused function x86: - Allow compiling out SMM support - Cleanup and documentation of SMM state save area format - Preserve interrupt shadow in SMM state save area - Respond to generic signals during slow page faults - Fixes and optimizations for the non-executable huge page errata fix. - Reprogram all performance counters on PMU filter change - Cleanups to Hyper-V emulation and tests - Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest running on top of a L1 Hyper-V hypervisor) - Advertise several new Intel features - x86 Xen-for-KVM: - Allow the Xen runstate information to cross a page boundary - Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured - Add support for 32-bit guests in SCHEDOP_poll - Notable x86 fixes and cleanups: - One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). - Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. - Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. - Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. - Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. - Advertise (on AMD) that the SMM_CTL MSR is not supported - Remove unnecessary exports Generic: - Support for responding to signals during page faults; introduces new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks Selftests: - Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. - Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. - Introduce actual atomics for clear/set_bit() in selftests - Add support for pinning vCPUs in dirty_log_perf_test. - Rename the so called "perf_util" framework to "memstress". - Add a lightweight psuedo RNG for guest use, and use it to randomize the access pattern and write vs. read percentage in the memstress tests. - Add a common ucall implementation; code dedup and pre-work for running SEV (and beyond) guests in selftests. - Provide a common constructor and arch hook, which will eventually be used by x86 to automatically select the right hypercall (AMD vs. Intel). - A bunch of added/enabled/fixed selftests for ARM64, covering memslots, breakpoints, stage-2 faults and access tracking. - x86-specific selftest changes: - Clean up x86's page table management. - Clean up and enhance the "smaller maxphyaddr" test, and add a related test to cover generic emulation failure. - Clean up the nEPT support checks. - Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values. - Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). Documentation: - Remove deleted ioctls from documentation - Clean up the docs for the x86 MSR filter. - Various fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits) KVM: x86: Add proper ReST tables for userspace MSR exits/flags KVM: selftests: Allocate ucall pool from MEM_REGION_DATA KVM: arm64: selftests: Align VA space allocator with TTBR0 KVM: arm64: Fix benign bug with incorrect use of VA_BITS KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow KVM: x86: Advertise that the SMM_CTL MSR is not supported KVM: x86: remove unnecessary exports KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic" tools: KVM: selftests: Convert clear/set_bit() to actual atomics tools: Drop "atomic_" prefix from atomic test_and_set_bit() tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests perf tools: Use dedicated non-atomic clear/set bit helpers tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers KVM: arm64: selftests: Enable single-step without a "full" ucall() KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself KVM: Remove stale comment about KVM_REQ_UNHALT KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR KVM: Reference to kvm_userspace_memory_region in doc and comments KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl ...
2022-12-14Merge tag 'x86_core_for_v6.2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Borislav Petkov: - Add the call depth tracking mitigation for Retbleed which has been long in the making. It is a lighterweight software-only fix for Skylake-based cores where enabling IBRS is a big hammer and causes a significant performance impact. What it basically does is, it aligns all kernel functions to 16 bytes boundary and adds a 16-byte padding before the function, objtool collects all functions' locations and when the mitigation gets applied, it patches a call accounting thunk which is used to track the call depth of the stack at any time. When that call depth reaches a magical, microarchitecture-specific value for the Return Stack Buffer, the code stuffs that RSB and avoids its underflow which could otherwise lead to the Intel variant of Retbleed. This software-only solution brings a lot of the lost performance back, as benchmarks suggest: https://lore.kernel.org/all/[email protected]/ That page above also contains a lot more detailed explanation of the whole mechanism - Implement a new control flow integrity scheme called FineIBT which is based on the software kCFI implementation and uses hardware IBT support where present to annotate and track indirect branches using a hash to validate them - Other misc fixes and cleanups * tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits) x86/paravirt: Use common macro for creating simple asm paravirt functions x86/paravirt: Remove clobber bitmask from .parainstructions x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit x86/Kconfig: Enable kernel IBT by default x86,pm: Force out-of-line memcpy() objtool: Fix weak hole vs prefix symbol objtool: Optimize elf_dirty_reloc_sym() x86/cfi: Add boot time hash randomization x86/cfi: Boot time selection of CFI scheme x86/ibt: Implement FineIBT objtool: Add --cfi to generate the .cfi_sites section x86: Add prefix symbols for function padding objtool: Add option to generate prefix symbols objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf objtool: Slice up elf_create_section_symbol() kallsyms: Revert "Take callthunks into account" x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces x86/retpoline: Fix crash printing warning x86/paravirt: Fix a !PARAVIRT build warning ...
2022-11-30KVM: SVM: Replace kmap_atomic() with kmap_local_page()Zhao Liu1-2/+2
The use of kmap_atomic() is being deprecated in favor of kmap_local_page()[1]. The main difference between atomic and local mappings is that local mappings don't disable page faults or preemption. There're 2 reasons we can use kmap_local_page() here: 1. SEV is 64-bit only and kmap_local_page() doesn't disable migration in this case, but here the function clflush_cache_range() uses CLFLUSHOPT instruction to flush, and on x86 CLFLUSHOPT is not CPU-local and flushes the page out of the entire cache hierarchy on all CPUs (APM volume 3, chapter 3, CLFLUSHOPT). So there's no need to disable preemption to ensure CPU-local. 2. clflush_cache_range() doesn't need to disable pagefault and the mapping is still valid even if sleeps. This is also true for sched out/in when preempted. In addition, though kmap_local_page() is a thin wrapper around page_address() on 64-bit, kmap_local_page() should still be used here in preference to page_address() since page_address() isn't suitable to be used in a generic function (like sev_clflush_pages()) where the page passed in is not easy to determine the source of allocation. Keeping the kmap* API in place means it can be used for things other than highmem mappings[2]. Therefore, sev_clflush_pages() is a function that should use kmap_local_page() in place of kmap_atomic(). Convert the calls of kmap_atomic() / kunmap_atomic() to kmap_local_page() / kunmap_local(). [1]: https://lore.kernel.org/all/[email protected] [2]: https://lore.kernel.org/lkml/[email protected]/ Suggested-by: Dave Hansen <[email protected]> Suggested-by: Ira Weiny <[email protected]> Suggested-by: Fabio M. De Francesco <[email protected]> Signed-off-by: Zhao Liu <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2022-11-30KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't validSean Christopherson1-2/+8
Skip the WRMSR fastpath in SVM's VM-Exit handler if the next RIP isn't valid, e.g. because KVM is running with nrips=false. SVM must decode and emulate to skip the WRMSR if the CPU doesn't provide the next RIP. Getting the instruction bytes to decode the WRMSR requires reading guest memory, which in turn means dereferencing memslots, and that isn't safe because KVM doesn't hold SRCU when the fastpath runs. Don't bother trying to enable the fastpath for this case, e.g. by doing only the WRMSR and leaving the "skip" until later. NRIPS is supported on all modern CPUs (KVM has considered making it mandatory), and the next RIP will be valid the vast, vast majority of the time. ============================= WARNING: suspicious RCU usage 6.0.0-smp--4e557fcd3d80-skip #13 Tainted: G O ----------------------------- include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by stable/206475: #0: ffff9d9dfebcc0f0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x8b/0x620 [kvm] stack backtrace: CPU: 152 PID: 206475 Comm: stable Tainted: G O 6.0.0-smp--4e557fcd3d80-skip #13 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022 Call Trace: <TASK> dump_stack_lvl+0x69/0xaa dump_stack+0x10/0x12 lockdep_rcu_suspicious+0x11e/0x130 kvm_vcpu_gfn_to_memslot+0x155/0x190 [kvm] kvm_vcpu_gfn_to_hva_prot+0x18/0x80 [kvm] paging64_walk_addr_generic+0x183/0x450 [kvm] paging64_gva_to_gpa+0x63/0xd0 [kvm] kvm_fetch_guest_virt+0x53/0xc0 [kvm] __do_insn_fetch_bytes+0x18b/0x1c0 [kvm] x86_decode_insn+0xf0/0xef0 [kvm] x86_emulate_instruction+0xba/0x790 [kvm] kvm_emulate_instruction+0x17/0x20 [kvm] __svm_skip_emulated_instruction+0x85/0x100 [kvm_amd] svm_skip_emulated_instruction+0x13/0x20 [kvm_amd] handle_fastpath_set_msr_irqoff+0xae/0x180 [kvm] svm_vcpu_run+0x4b8/0x5a0 [kvm_amd] vcpu_enter_guest+0x16ca/0x22f0 [kvm] kvm_arch_vcpu_ioctl_run+0x39d/0x900 [kvm] kvm_vcpu_ioctl+0x538/0x620 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 404d5d7bff0d ("KVM: X86: Introduce more exit_fastpath_completion enum values") Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-11-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-18/+10
Pull kvm fixes from Paolo Bonzini: "x86: - Fixes for Xen emulation. While nobody should be enabling it in the kernel (the only public users of the feature are the selftests), the bug effectively allows userspace to read arbitrary memory. - Correctness fixes for nested hypervisors that do not intercept INIT or SHUTDOWN on AMD; the subsequent CPU reset can cause a use-after-free when it disables virtualization extensions. While downgrading the panic to a WARN is quite easy, the full fix is a bit more laborious; there are also tests. This is the bulk of the pull request. - Fix race condition due to incorrect mmu_lock use around make_mmu_pages_available(). Generic: - Obey changes to the kvm.halt_poll_ns module parameter in VMs not using KVM_CAP_HALT_POLL, restoring behavior from before the introduction of the capability" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Update gfn_to_pfn_cache khva when it moves within the same page KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0 KVM: x86/xen: Validate port number in SCHEDOP_poll KVM: x86/mmu: Fix race condition in direct_page_fault KVM: x86: remove exit_int_info warning in svm_handle_exit KVM: selftests: add svm part to triple_fault_test KVM: x86: allow L1 to not intercept triple fault kvm: selftests: add svm nested shutdown test KVM: selftests: move idt_entry to header KVM: x86: forcibly leave nested mode on vCPU reset KVM: x86: add kvm_leave_nested KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use KVM: x86: nSVM: leave nested mode on vCPU free KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling KVM: Cap vcpu->halt_poll_ns before halting rather than after
2022-11-21Merge tag 'v6.1-rc6' into x86/core, to resolve conflictsIngo Molnar6-142/+262
Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c: # upstream: debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.c file") # retbleed work in x86/core: 5d8213864ade ("x86/retbleed: Add SKL return thunk") ... and these commits in include/linux/bpf.h: # upstram: 18acb7fac22f ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")") # x86/core commits: 931ab63664f0 ("x86/ibt: Implement FineIBT") bea75b33895f ("x86/Kconfig: Introduce function padding") The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream. Conflicts: arch/x86/kernel/asm-offsets.c include/linux/bpf.h Signed-off-by: Ingo Molnar <[email protected]>
2022-11-18KVM: nSVM: hyper-v: Enable L2 TLB flushVitaly Kuznetsov3-2/+55
Implement Hyper-V L2 TLB flush for nSVM. The feature needs to be enabled both in extended 'nested controls' in VMCB and VP assist page. According to Hyper-V TLFS, synthetic vmexit to L1 is performed with - HV_SVM_EXITCODE_ENL exit_code. - HV_SVM_ENL_EXITCODE_TRAP_AFTER_FLUSH exit_info_1. Note: VP assist page is cached in 'struct kvm_vcpu_hv' so recalc_intercepts() doesn't need to read from guest's memory. KVM needs to update the case upon each VMRUN and after svm_set_nested_state (svm_get_nested_state_pages()) to handle the case when the guest got migrated while L2 was running. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hookVitaly Kuznetsov3-0/+14
Hyper-V supports injecting synthetic L2->L1 exit after performing L2 TLB flush operation but the procedure is vendor specific. Introduce .hv_inject_synthetic_vmexit_post_tlb_flush nested hook for it. Reviewed-by: Maxim Levitsky <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_idVitaly Kuznetsov2-0/+17
Similar to nSVM, KVM needs to know L2's VM_ID/VP_ID and Partition assist page address to handle L2 TLB flush requests. Reviewed-by: Maxim Levitsky <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18KVM: x86: hyper-v: Introduce TLB flush fifoVitaly Kuznetsov1-1/+1
To allow flushing individual GVAs instead of always flushing the whole VPID a per-vCPU structure to pass the requests is needed. Use standard 'kfifo' to queue two types of entries: individual GVA (GFN + up to 4095 following GFNs in the lower 12 bits) and 'flush all'. The size of the fifo is arbitrarily set to '16'. Note, kvm_hv_flush_tlb() only queues 'flush all' entries for now and kvm_hv_vcpu_flush_tlb() doesn't actually read the fifo just resets the queue before returning -EOPNOTSUPP (which triggers full TLB flush) so the functional change is very small but the infrastructure is prepared to handle individual GVA flush requests. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flagVitaly Kuznetsov1-0/+7
In preparation to implementing fine-grained Hyper-V TLB flush and L2 TLB flush, resurrect dedicated KVM_REQ_HV_TLB_FLUSH request bit. As KVM_REQ_TLB_FLUSH_GUEST is a stronger operation, clear KVM_REQ_HV_TLB_FLUSH request in kvm_vcpu_flush_tlb_guest(). The flush itself is temporary handled by kvm_vcpu_flush_tlb_guest(). No functional change intended. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush'Vitaly Kuznetsov2-4/+4
To make terminology between Hyper-V-on-KVM and KVM-on-Hyper-V consistent, rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush'. The change eliminates the use of confusing 'direct' and adds the missing underscore. No functional change. Reviewed-by: Maxim Levitsky <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18x86/hyperv: KVM: Rename "hv_enlightenments" to "hv_vmcb_enlightenments"Sean Christopherson4-6/+6
Now that KVM isn't littered with "struct hv_enlightenments" casts, rename the struct to "hv_vmcb_enlightenments" to highlight the fact that the struct is specifically for SVM's VMCB. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18KVM: SVM: Add a proper field for Hyper-V VMCB enlightenmentsSean Christopherson4-15/+16
Add a union to provide hv_enlightenments side-by-side with the sw_reserved bytes that Hyper-V's enlightenments overlay. Casting sw_reserved everywhere is messy, confusing, and unnecessarily unsafe. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-18x86/hyperv: Move VMCB enlightenment definitions to hyperv-tlfs.hSean Christopherson4-26/+4
Move Hyper-V's VMCB enlightenment definitions to the TLFS header; the definitions come directly from the TLFS[*], not from KVM. No functional change intended. [*] https://learn.microsoft.com/en-us/virtualization/hyper-v-on-windows/tlfs/datatypes/hv_svm_enlightened_vmcb_fields [vitaly: rename VMCB_HV_ -> HV_VMCB_ to match the rest of hyperv-tlfs.h, keep svm/hyperv.h] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-17Merge branch 'kvm-svm-harden' into HEADPaolo Bonzini2-18/+10
This fixes three issues in nested SVM: 1) in the shutdown_interception() vmexit handler we call kvm_vcpu_reset(). However, if running nested and L1 doesn't intercept shutdown, the function resets vcpu->arch.hflags without properly leaving the nested state. This leaves the vCPU in inconsistent state and later triggers a kernel panic in SVM code. The same bug can likely be triggered by sending INIT via local apic to a vCPU which runs a nested guest. On VMX we are lucky that the issue can't happen because VMX always intercepts triple faults, thus triple fault in L2 will always be redirected to L1. Plus, handle_triple_fault() doesn't reset the vCPU. INIT IPI can't happen on VMX either because INIT events are masked while in VMX mode. Secondarily, KVM doesn't honour SHUTDOWN intercept bit of L1 on SVM. A normal hypervisor should always intercept SHUTDOWN, a unit test on the other hand might want to not do so. Finally, the guest can trigger a kernel non rate limited printk on SVM from the guest, which is fixed as well. Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-17KVM: x86: remove exit_int_info warning in svm_handle_exitMaxim Levitsky1-15/+0
It is valid to receive external interrupt and have broken IDT entry, which will lead to #GP with exit_int_into that will contain the index of the IDT entry (e.g any value). Other exceptions can happen as well, like #NP or #SS (if stack switch fails). Thus this warning can be user triggred and has very little value. Cc: [email protected] Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-17KVM: x86: allow L1 to not intercept triple faultMaxim Levitsky1-0/+6
This is SVM correctness fix - although a sane L1 would intercept SHUTDOWN event, it doesn't have to, so we have to honour this. Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-17KVM: x86: add kvm_leave_nestedMaxim Levitsky1-3/+0
add kvm_leave_nested which wraps a call to nested_ops->leave_nested into a function. Cc: [email protected] Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-17KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in useMaxim Levitsky1-0/+3
Make sure that KVM uses vmcb01 before freeing nested state, and warn if that is not the case. This is a minimal fix for CVE-2022-3344 making the kernel print a warning instead of a kernel panic. Cc: [email protected] Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-17KVM: x86: nSVM: leave nested mode on vCPU freeMaxim Levitsky1-0/+1
If the VM was terminated while nested, we free the nested state while the vCPU still is in nested mode. Soon a warning will be added for this condition. Cc: [email protected] Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-15x86/cpu: Restore AMD's DE_CFG MSR after resumeBorislav Petkov1-5/+5
DE_CFG contains the LFENCE serializing bit, restore it on resume too. This is relevant to older families due to the way how they do S3. Unify and correct naming while at it. Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction") Reported-by: Andrew Cooper <[email protected]> Reported-by: Pawan Gupta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-11-09KVM: x86/pmu: Defer counter emulated overflow via pmc->prev_counterLike Xu1-1/+1
Defer reprogramming counters and handling overflow via KVM_REQ_PMU when incrementing counters. KVM skips emulated WRMSR in the VM-Exit fastpath, the fastpath runs with IRQs disabled, skipping instructions can increment and reprogram counters, reprogramming counters can sleep, and sleeping is disallowed while IRQs are disabled. [*] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 [*] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2981888, name: CPU 15/KVM [*] preempt_count: 1, expected: 0 [*] RCU nest depth: 0, expected: 0 [*] INFO: lockdep is turned off. [*] irq event stamp: 0 [*] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [*] hardirqs last disabled at (0): [<ffffffff8121222a>] copy_process+0x146a/0x62d0 [*] softirqs last enabled at (0): [<ffffffff81212269>] copy_process+0x14a9/0x62d0 [*] softirqs last disabled at (0): [<0000000000000000>] 0x0 [*] Preemption disabled at: [*] [<ffffffffc2063fc1>] vcpu_enter_guest+0x1001/0x3dc0 [kvm] [*] CPU: 17 PID: 2981888 Comm: CPU 15/KVM Kdump: 5.19.0-rc1-g239111db364c-dirty #2 [*] Call Trace: [*] <TASK> [*] dump_stack_lvl+0x6c/0x9b [*] __might_resched.cold+0x22e/0x297 [*] __mutex_lock+0xc0/0x23b0 [*] perf_event_ctx_lock_nested+0x18f/0x340 [*] perf_event_pause+0x1a/0x110 [*] reprogram_counter+0x2af/0x1490 [kvm] [*] kvm_pmu_trigger_event+0x429/0x950 [kvm] [*] kvm_skip_emulated_instruction+0x48/0x90 [kvm] [*] handle_fastpath_set_msr_irqoff+0x349/0x3b0 [kvm] [*] vmx_vcpu_run+0x268e/0x3b80 [kvm_intel] [*] vcpu_enter_guest+0x1d22/0x3dc0 [kvm] Add a field to kvm_pmc to track the previous counter value in order to defer overflow detection to kvm_pmu_handle_event() (the counter must be paused before handling overflow, and that may increment the counter). Opportunistically shrink sizeof(struct kvm_pmc) a bit. Suggested-by: Wanpeng Li <[email protected]> Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions") Signed-off-by: Like Xu <[email protected]> Link: https://lore.kernel.org/r/[email protected] [sean: avoid re-triggering KVM_REQ_PMU on overflow, tweak changelog] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86/pmu: Defer reprogram_counter() to kvm_pmu_handle_event()Like Xu1-1/+1
Batch reprogramming PMU counters by setting KVM_REQ_PMU and thus deferring reprogramming kvm_pmu_handle_event() to avoid reprogramming a counter multiple times during a single VM-Exit. Deferring programming will also allow KVM to fix a bug where immediately reprogramming a counter can result in sleeping (taking a mutex) while interrupts are disabled in the VM-Exit fastpath. Introduce kvm_pmu_request_counter_reprogam() to make it obvious that KVM is _requesting_ a reprogram and not actually doing the reprogram. Opportunistically refine related comments to avoid misunderstandings. Signed-off-by: Like Xu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: SVM: don't save SVM state to SMRAM when VM is not long mode capableMaxim Levitsky1-0/+8
When the guest CPUID doesn't have support for long mode, 32 bit SMRAM layout is used and it has no support for preserving EFER and/or SVM state. Note that this isn't relevant to running 32 bit guests on VM which is long mode capable - such VM can still run 32 bit guests in compatibility mode. Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: SVM: use smram structsMaxim Levitsky1-14/+7
Use SMM structs in the SVM code as well, which removes the last user of put_smstate/GET_SMSTATE so remove these macros as well. Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: svm: drop explicit return value of kvm_vcpu_mapMaxim Levitsky1-4/+3
if kvm_vcpu_map returns non zero value, error path should be triggered regardless of the exact returned error value. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: smm: use smram structs in the common codeMaxim Levitsky1-2/+6
Use kvm_smram union instad of raw arrays in the common smm code. Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: compile out vendor-specific code if SMM is disabledPaolo Bonzini2-0/+6
Vendor-specific code that deals with SMI injection and saving/restoring SMM state is not needed if CONFIG_KVM_SMM is disabled, so remove the four callbacks smi_allowed, enter_smm, leave_smm and enable_smi_window. The users in svm/nested.c and x86.c also have to be compiled out; the amount of #ifdef'ed code is small and it's not worth moving it to smm.c. enter_smm is now used only within #ifdef CONFIG_KVM_SMM, and the stub can therefore be removed. Signed-off-by: Paolo Bonzini <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: allow compiling out SMM supportPaolo Bonzini1-0/+2
Some users of KVM implement the UEFI variable store through a paravirtual device that does not require the "SMM lockbox" component of edk2; allow them to compile out system management mode, which is not a full implementation especially in how it interacts with nested virtualization. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: start moving SMM-related functions to new filesPaolo Bonzini2-2/+4
Create a new header and source with code related to system management mode emulation. Entry and exit will move there too; for now, opportunistically rename put_smstate to PUT_SMSTATE while moving it to smm.h, and adjust the SMM state saving code. Signed-off-by: Paolo Bonzini <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: Name and check reserved fields with structs offsetCarlos Bilbao1-1/+1
Rename reserved fields on all structs in arch/x86/include/asm/svm.h following their offset within the structs. Include compile time checks for this in the same place where other BUILD_BUG_ON for the structs are. This also solves that fields of struct sev_es_save_area are named by their order of appearance, but right now they jump from reserved_5 to reserved_7. Link: https://lkml.org/lkml/2022/10/22/376 Signed-off-by: Carlos Bilbao <[email protected]> Message-Id: <[email protected]> [Use ASSERT_STRUCT_OFFSET + fix a couple wrong offsets. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: Handle PERF_CAPABILITIES in common x86's kvm_get_msr_feature()Sean Christopherson1-3/+0
Handle PERF_CAPABILITIES directly in kvm_get_msr_feature() now that the supported value is available in kvm_caps. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: Track supported PERF_CAPABILITIES in kvm_capsSean Christopherson1-0/+2
Track KVM's supported PERF_CAPABILITIES in kvm_caps instead of computing the supported capabilities on the fly every time. Using kvm_caps will also allow for future cleanups as the kvm_caps values can be used directly in common x86 code. Signed-off-by: Sean Christopherson <[email protected]> Acked-by: Like Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86/pmu: Limit the maximum number of supported AMD GP countersLike Xu1-3/+4
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters, but currently only 6 pairs of MSRs are accepted by KVM. While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without adjusting msrs_to_save_all[] could result in out-of-bounds accesses. Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to refer to the number of counters supported by KVM. Signed-off-by: Like Xu <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: Only dump VMSA to klog at KERN_DEBUG levelPeter Gonda1-1/+1
Explicitly print the VMSA dump at KERN_DEBUG log level, KERN_CONT uses KERNEL_DEFAULT if the previous log line has a newline, i.e. if there's nothing to continuing, and as a result the VMSA gets dumped when it shouldn't. The KERN_CONT documentation says it defaults back to KERNL_DEFAULT if the previous log line has a newline. So switch from KERN_CONT to print_hex_dump_debug(). Jarkko pointed this out in reference to the original patch. See: https://lore.kernel.org/all/[email protected]/ print_hex_dump(KERN_DEBUG, ...) was pointed out there, but print_hex_dump_debug() should similar. Fixes: 6fac42f127b8 ("KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog") Signed-off-by: Peter Gonda <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Cc: Jarkko Sakkinen <[email protected]> Cc: Harald Hoyer <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dave Hansen <[email protected]> Cc: [email protected] Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09x86, KVM: remove unnecessary argument to x86_virt_spec_ctrl and callersPaolo Bonzini1-2/+2
x86_virt_spec_ctrl only deals with the paravirtualized MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL anymore; remove the corresponding, unused argument. Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assemblyPaolo Bonzini3-28/+132
Restoration of the host IA32_SPEC_CTRL value is probably too late with respect to the return thunk training sequence. With respect to the user/kernel boundary, AMD says, "If software chooses to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel exit), software should set STIBP to 1 before executing the return thunk training sequence." I assume the same requirements apply to the guest/host boundary. The return thunk training sequence is in vmenter.S, quite close to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's IA32_SPEC_CTRL value is not restored until much later. To avoid this, move the restoration of host SPEC_CTRL to assembly and, for consistency, move the restoration of the guest SPEC_CTRL as well. This is not particularly difficult, apart from some care to cover both 32- and 64-bit, and to share code between SEV-ES and normal vmentry. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Suggested-by: Jim Mattson <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: restore host save area from assemblyPaolo Bonzini4-13/+25
Allow access to the percpu area via the GS segment base, which is needed in order to access the saved host spec_ctrl value. In linux-next FILL_RETURN_BUFFER also needs to access percpu data. For simplicity, the physical address of the save area is added to struct svm_cpu_data. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reported-by: Nathan Chancellor <[email protected]> Analyzed-by: Andrew Cooper <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.