| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
So don't forget to reserve its stolen memory bits.
v2: Add ack and remove "TODO" from commit message.
Signed-off-by: Paulo Zanoni <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We can use PCID if the CPU has PCID and PGE and we're not on Xen.
By itself, this has no effect. A followup patch will start using PCID.
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/6327ecd907b32f79d5aa0d466f04503bbec5df88.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The parameter is only present on x86_64 systems to save a few bytes,
as PCID is always disabled on x86_32.
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/8bbb2e65bcd249a5f18bfb8128b4689f08ac2b60.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
32-bit kernels on new hardware will see PCID in CPUID, but PCID can
only be used in 64-bit mode. Rather than making all PCID code
conditional, just disable the feature on 32-bit builds.
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/2e391769192a4d31b808410c383c6bf0734bc6ea.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add the real e820_tabel_firmware[] that will not be modified by the kernel
or the EFI boot stub under any circumstance.
In addition to that modify the code so that e820_table_firmwarep[] is
exposed via sysfs to represent the real firmware memory layout,
rather than exposing the e820_table_kexec[] table.
This fixes a hibernation bug/warning, which uses e820_table_kexec[] to check
RAM layout consistency across hibernation/resume:
The suspend kernel:
[ 0.000000] e820: update [mem 0x76671018-0x76679457] usable ==> usable
The resume kernel:
[ 0.000000] e820: update [mem 0x7666f018-0x76677457] usable ==> usable
...
[ 15.752088] PM: Using 3 thread(s) for decompression.
[ 15.752088] PM: Loading and decompressing image data (471870 pages)...
[ 15.764971] Hibernate inconsistent memory map detected!
[ 15.770833] PM: Image mismatch: architecture specific data
Actually it is safe to restore these pages because E820_TYPE_RAM and
E820_TYPE_RESERVED_KERN are treated the same during hibernation, so
the original e820 table provided by the bootloader is used for
hibernation MD5 fingerprint checking.
The side effect is that, this newly introduced variable might increase the
kernel size at compile time.
Suggested-by: Ingo Molnar <[email protected]>
Signed-off-by: Chen Yu <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Xunlei Pang <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Currently the e820_table_firmware[] table is mainly used by the kexec,
and it is not what it's supposed to be - despite its name it might be
modified by the kernel.
So change its name to e820_table_kexec[]. In the next patch we will
introduce the real e820_table_firmware[] table.
No functional change.
Signed-off-by: Chen Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Xunlei Pang <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The following commit in 2013:
77ea8c948953 ("x86: Reserve setup_data ranges late after parsing memmap cmdline")
has fixed the issue of losing setup_data information by deferring the
e820_reserve_setup_data() call until the early params have been parsed.
But this also introduced a new problem that, during early params parsing,
the kexec kernel might fake a mptable and saves it into the e820_table_firmware[]
table (without saving the mptable to the e820_table[]), however the subsequent
invoking of e820_reserve_setup_data() will overwrite the e820_table_firmware[]
according to the e820_table[], thus the fake mptable information is lost.
Fix this issue by updating the e820_table_firmware[] according to
the setup_data information, but without overwriting it.
Signed-off-by: Chen Yu <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Xunlei Pang <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The pat_enabled() logic is broken on CPUs which do not support PAT and
where the initialization code fails to call pat_init(). Due to that the
enabled flag stays true and pat_enabled() returns true wrongfully.
As a consequence the mappings, e.g. for Xorg, are set up with the wrong
caching mode and the required MTRR setups are omitted.
To cure this the following changes are required:
1) Make pat_enabled() return true only if PAT initialization was
invoked and successful.
2) Invoke init_cache_modes() unconditionally in setup_arch() and
remove the extra callsites in pat_disable() and the pat disabled
code path in pat_init().
Also rename __pat_enabled to pat_disabled to reflect the real purpose of
this variable.
Fixes: 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Bernhard Held <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: "Luis R. Rodriguez" <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The big ticket items here are the rework of suspend-to-idle in order
to add proper support for power button wakeup from it on recent Dell
laptops and the rework of interfaces exporting the current CPU
frequency on x86.
In addition to that, support for a few new pieces of hardware is
added, the PCI/ACPI device wakeup infrastructure is simplified
significantly and the wakeup IRQ framework is fixed to unbreak the IRQ
bus locking infrastructure.
Also, there are some functional improvements for intel_pstate, tools
updates and small fixes and cleanups all over.
Specifics:
- Rework suspend-to-idle to allow it to take wakeup events signaled
by the EC into account on ACPI-based platforms in order to properly
support power button wakeup from suspend-to-idle on recent Dell
laptops (Rafael Wysocki).
That includes the core suspend-to-idle code rework, support for the
Low Power S0 _DSM interface, and support for the ACPI INT0002
Virtual GPIO device from Hans de Goede (required for USB keyboard
wakeup from suspend-to-idle to work on some machines).
- Stop trying to export the current CPU frequency via /proc/cpuinfo
on x86 as that is inaccurate and confusing (Len Brown).
- Rework the way in which the current CPU frequency is exported by
the kernel (over the cpufreq sysfs interface) on x86 systems with
the APERF and MPERF registers by always using values read from
these registers, when available, to compute the current frequency
regardless of which cpufreq driver is in use (Len Brown).
- Rework the PCI/ACPI device wakeup infrastructure to remove the
questionable and artificial distinction between "devices that can
wake up the system from sleep states" and "devices that can
generate wakeup signals in the working state" from it, which allows
the code to be simplified quite a bit (Rafael Wysocki).
- Fix the wakeup IRQ framework by making it use SRCU instead of RCU
which doesn't allow sleeping in the read-side critical sections,
but which in turn is expected to be allowed by the IRQ bus locking
infrastructure (Thomas Gleixner).
- Modify some computations in the intel_pstate driver to avoid
rounding errors resulting from them (Srinivas Pandruvada).
- Reduce the overhead of the intel_pstate driver in the HWP
(hardware-managed P-states) mode and when the "performance" P-state
selection algorithm is in use by making it avoid registering
scheduler callbacks in those cases (Len Brown).
- Rework the energy_performance_preference sysfs knob in intel_pstate
by changing the values that correspond to different symbolic hint
names used by it (Len Brown).
- Make it possible to use more than one cpuidle driver at the same
time on ARM (Daniel Lezcano).
- Make it possible to prevent the cpuidle menu governor from using
the 0 state by disabling it via sysfs (Nicholas Piggin).
- Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on
AMD systems (Yazen Ghannam).
- Make the CPPC cpufreq driver take the lowest nonlinear performance
information into account (Prashanth Prakash).
- Add support for hi3660 to the cpufreq-dt driver, fix the imx6q
driver and clean up the sfi, exynos5440 and intel_pstate drivers
(Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael
Wysocki, Tao Wang).
- Fix a few minor issues in the generic power domains (genpd)
framework and clean it up somewhat (Krzysztof Kozlowski, Mikko
Perttunen, Viresh Kumar).
- Fix a couple of minor issues in the operating performance points
(OPP) framework and clean it up somewhat (Viresh Kumar).
- Fix a CONFIG dependency in the hibernation core and clean it up
slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).
- Add rk3228 support to the rockchip-io adaptive voltage scaling
(AVS) driver (David Wu).
- Fix an incorrect bit shift operation in the RAPL power capping
driver (Adam Lessnau).
- Add support for the EPP field in the HWP (hardware managed
P-states) control register, HWP.EPP, to the x86_energy_perf_policy
tool and update msr-index.h with HWP.EPP values (Len Brown).
- Fix some minor issues in the turbostat tool (Len Brown).
- Add support for AMD family 0x17 CPUs to the cpupower tool and fix a
minor issue in it (Sherry Hurwitz).
- Assorted cleanups, mostly related to the constification of some
data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
Kozlowski)"
* tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits)
cpufreq: Update scaling_cur_freq documentation
cpufreq: intel_pstate: Clean up after performance governor changes
PM: hibernate: constify attribute_group structures.
cpuidle: menu: allow state 0 to be disabled
intel_idle: Use more common logging style
PM / Domains: Fix missing default_power_down_ok comment
PM / Domains: Fix unsafe iteration over modified list of domains
PM / Domains: Fix unsafe iteration over modified list of domain providers
PM / Domains: Fix unsafe iteration over modified list of device links
PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device
PM / Domains: Call driver's noirq callbacks
PM / core: Drop run_wake flag from struct dev_pm_info
PCI / PM: Simplify device wakeup settings code
PCI / PM: Drop pme_interrupt flag from struct pci_dev
ACPI / PM: Consolidate device wakeup settings code
ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
PM / QoS: constify *_attribute_group.
PM / AVS: rockchip-io: add io selectors and supplies for rk3228
powercap/RAPL: prevent overridding bits outside of the mask
PM / sysfs: Constify attribute groups
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Thomas Gleixner:
"The RAS updates for the 4.13 merge window:
- Cleanup of the MCE injection facility (Borsilav Petkov)
- Rework of the AMD/SMCA handling (Yazen Ghannam)
- Enhancements for ACPI/APEI to handle new notitication types (Shiju
Jose)
- atomic_t to refcount_t conversion (Elena Reshetova)
- A few fixes and enhancements all over the place"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS/CEC: Check the correct variable in the debugfs error handling
x86/mce: Always save severity in machine_check_poll()
x86/MCE, xen/mcelog: Make /dev/mcelog registration messages more precise
x86/mce: Update bootlog description to reflect behavior on AMD
x86/mce: Don't disable MCA banks when offlining a CPU on AMD
x86/mce/mce-inject: Preset the MCE injection struct
x86/mce: Clean up include files
x86/mce: Get rid of register_mce_write_callback()
x86/mce: Merge mce_amd_inj into mce-inject
x86/mce/AMD: Use saved threshold block info in interrupt handler
x86/mce/AMD: Use msr_stat when clearing MCA_STATUS
x86/mce/AMD: Carve out SMCA bank configuration
x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers
x86/mce: Convert threshold_bank.cpus from atomic_t to refcount_t
RAS: Make local function parse_ras_param() static
ACPI/APEI: Handle GSIV and GPIO notification types
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP hotplug updates from Thomas Gleixner:
"This update is primarily a cleanup of the CPU hotplug locking code.
The hotplug locking mechanism is an open coded RWSEM, which allows
recursive locking. The main problem with that is the recursive nature
as it evades the full lockdep coverage and hides potential deadlocks.
The rework replaces the open coded RWSEM with a percpu RWSEM and
establishes full lockdep coverage that way.
The bulk of the changes fix up recursive locking issues and address
the now fully reported potential deadlocks all over the place. Some of
these deadlocks have been observed in the RT tree, but on mainline the
probability was low enough to hide them away."
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
cpu/hotplug: Constify attribute_group structures
powerpc: Only obtain cpu_hotplug_lock if called by rtasd
ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
cpu/hotplug: Remove unused check_for_tasks() function
perf/core: Don't release cred_guard_mutex if not taken
cpuhotplug: Link lock stacks for hotplug callbacks
acpi/processor: Prevent cpu hotplug deadlock
sched: Provide is_percpu_thread() helper
cpu/hotplug: Convert hotplug locking to percpu rwsem
s390: Prevent hotplug rwsem recursion
arm: Prevent hotplug rwsem recursion
arm64: Prevent cpu hotplug rwsem recursion
kprobes: Cure hotplug lock ordering issues
jump_label: Reorder hotplug lock and jump_label_lock
perf/tracing/cpuhotplug: Fix locking order
ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
PCI: Replace the racy recursion prevention
PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
x86/perf: Drop EXPORT of perf_check_microcode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timers updates from Thomas Gleixner:
"This update contains:
- The solution for the TSC deadline timer borkage, which is caused by
a hardware problem in the TSC_ADJUST/TSC_DEADLINE_TIMER logic.
The problem is documented now and fixed with a microcode update, so
we can remove the workaround and just check for the microcode version.
If the microcode is not up to date, then the TSC deadline timer is
disabled. If the borkage is fixed by the proper microcode version,
then the deadline timer can be used. In both cases the restrictions
to the range of the TSC_ADJUST value, which were added as
workarounds, are removed.
- A few simple fixes and updates to the timer related x86 code"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Call check_system_tsc_reliable() before unsynchronized_tsc()
x86/hpet: Do not use smp_processor_id() in preemptible code
x86/time: Make setup_default_timer_irq() static
x86/tsc: Remove the TSC_ADJUST clamp
x86/apic: Add TSC_DEADLINE quirk due to errata
x86/apic: Change the lapic name in deadline mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq department delivers:
- Expand the generic infrastructure handling the irq migration on CPU
hotplug and convert X86 over to it. (Thomas Gleixner)
Aside of consolidating code this is a preparatory change for:
- Finalizing the affinity management for multi-queue devices. The
main change here is to shut down interrupts which are affine to a
outgoing CPU and reenabling them when the CPU comes online again.
That avoids moving interrupts pointlessly around and breaking and
reestablishing affinities for no value. (Christoph Hellwig)
Note: This contains also the BLOCK-MQ and NVME changes which depend
on the rework of the irq core infrastructure. Jens acked them and
agreed that they should go with the irq changes.
- Consolidation of irq domain code (Marc Zyngier)
- State tracking consolidation in the core code (Jeffy Chen)
- Add debug infrastructure for hierarchical irq domains (Thomas
Gleixner)
- Infrastructure enhancement for managing generic interrupt chips via
devmem (Bartosz Golaszewski)
- Constification work all over the place (Tobias Klauser)
- Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)
- The usual set of fixes, updates and enhancements all over the
place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
irqchip/or1k-pic: Fix interrupt acknowledgement
irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
nvme: Allocate queues for all possible CPUs
blk-mq: Create hctx for each present CPU
blk-mq: Include all present CPUs in the default queue mapping
genirq: Avoid unnecessary low level irq function calls
genirq: Set irq masked state when initializing irq_desc
genirq/timings: Add infrastructure for estimating the next interrupt arrival time
genirq/timings: Add infrastructure to track the interrupt timings
genirq/debugfs: Remove pointless NULL pointer check
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
irqchip/gic-v3-its: Add ACPI NUMA node mapping
irqchip/gic-v3-its-platform-msi: Make of_device_ids const
irqchip/gic-v3-its: Make of_device_ids const
irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
genirq/irqdomain: Remove auto-recursive hierarchy support
irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued work to add support for 5-level paging provided by future
Intel CPUs. In particular we switch the x86 GUP code to the generic
implementation. (Kirill A. Shutemov)
- Continued work to add PCID CPU support to native kernels as well.
In this round most of the focus is on reworking/refreshing the TLB
flush infrastructure for the upcoming PCID changes. (Andy
Lutomirski)"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/mm: Delete a big outdated comment about TLB flushing
x86/mm: Don't reenter flush_tlb_func_common()
x86/KASLR: Fix detection 32/64 bit bootloaders for 5-level paging
x86/ftrace: Exclude functions in head64.c from function-tracing
x86/mmap, ASLR: Do not treat unlimited-stack tasks as legacy mmap
x86/mm: Remove reset_lazy_tlbstate()
x86/ldt: Simplify the LDT switching logic
x86/boot/64: Put __startup_64() into .head.text
x86/mm: Add support for 5-level paging for KASLR
x86/mm: Make kernel_physical_mapping_init() support 5-level paging
x86/mm: Add sync_global_pgds() for configuration with 5-level paging
x86/boot/64: Add support of additional page table level during early boot
x86/boot/64: Rename init_level4_pgt and early_level4_pgt
x86/boot/64: Rewrite startup_64() in C
x86/boot/compressed: Enable 5-level paging during decompression stage
x86/boot/efi: Define __KERNEL32_CS GDT on 64-bit configurations
x86/boot/efi: Fix __KERNEL_CS definition of GDT entry on 64-bit configurations
x86/boot/efi: Cleanup initialization of GDT entries
x86/asm: Fix comment in return_from_SYSCALL_64()
x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode updates from Ingo Molnar:
"The main changes are a fix early microcode application for
resume-from-RAM, plus a 32-bit initrd placement fix - by Borislav
Petkov"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Make a couple of symbols static
x86/microcode/intel: Save pointer to ucode patch for early AP loading
x86/microcode: Look for the initrd at the correct address on 32-bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hyperv updates from Ingo Molnar:
"Avoid boot time TSC calibration on Hyper-V hosts, to improve
calibration robustness. (Vitaly Kuznetsov)"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Read TSC frequency from a synthetic MSR
x86/hyperv: Check frequency MSRs presence according to the specification
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug update from Ingo Molnar:
"A single fix for an off-by one bug in test_nmi_ipi() that probably
doesn't matter in practice"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Fix timeout test in test_nmi_ipi()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main changes in this cycle were KASLR improvements for rare
environments with special boot options, by Baoquan He. Also misc
smaller changes/cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Extend the lower bound of crash kernel low reservations
x86/boot: Remove unused copy_*_gs() functions
x86/KASLR: Use the right memcpy() implementation
Documentation/kernel-parameters.txt: Update 'memmap=' boot option description
x86/KASLR: Handle the memory limit specified by the 'memmap=' and 'mem=' boot options
x86/KASLR: Parse all 'memmap=' boot option entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Ingo Molnar:
"Janitorial changes: removal of an unused function plus __init
annotations"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Make arch_init_msi/htirq_domain __init
x86/apic: Make init_legacy_irqs() __init
x86/ioapic: Remove unused IO_APIC_irq_trigger() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"This is an extensive rewrite of the objdump tool to track all stack
pointer modifications through the machine instructions of disassembled
functions found in kernel .o files.
This re-design removes the prior dependency on CONFIG_FRAME_POINTERS,
with the goal to prepare the tool to generate kernel debuginfo data in
the future. There's also an increase in checking/tracking robustness
as a side effect as well.
No (intended) changes to existing functionality"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Silence warnings for functions which use IRET
objtool: Implement stack validation 2.0
objtool, x86: Add several functions and files to the objtool whitelist
objtool: Move checking code to check.c
|
|
* pm-cpufreq:
cpufreq / CPPC: Initialize policy->min to lowest nonlinear performance
cpufreq: sfi: make freq_table static
cpufreq: exynos5440: Fix inconsistent indenting
cpufreq: imx6q: imx6ull should use the same flow as imx6ul
cpufreq: dt: Add support for hi3660
* intel_pstate:
cpufreq: Update scaling_cur_freq documentation
cpufreq: intel_pstate: Clean up after performance governor changes
intel_pstate: skip scheduler hook when in "performance" mode
intel_pstate: delete scheduler hook in HWP mode
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF
cpufreq: intel_pstate: Remove max/min fractions to limit performance
x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"
* pm-cpuidle:
cpuidle: menu: allow state 0 to be disabled
intel_idle: Use more common logging style
x86/ACPI/cstate: Allow ACPI C1 FFH MWAIT use on AMD systems
ARM: cpuidle: Support asymmetric idle definition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Fixlets for x86:
- Prevent kexec crash when KASLR is enabled, which was caused by an
address calculation bug
- Restore the freeing of PUDs on memory hot remove
- Correct a negated pointer check in the intel uncore performance
monitoring driver
- Plug a memory leak in an error exit path in the RDT code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix memory leak on mount failure
x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug
x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization
perf/x86/intel/uncore: Fix wrong box pointer check
x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD
|
|
If mount fails, the kn_info directory is not freed causing memory leak.
Add the missing error handling path.
Fixes: 4e978d06dedb ("x86/intel_rdt: Add "info" files to resctrl file system")
Signed-off-by: Vikas Shivappa <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two fixes:
- A fix for AMD IOMMU interrupt remapping code when IRQs are
forwarded directly to KVM guests
- Fixed check in the recently merged code to allow tboot with
Intel VT-d disabled"
* tag 'iommu-fixes-v4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix interrupt remapping when disable guest_mode
iommu/vt-d: Correctly disable Intel IOMMU force on
|
|
In preparation for an objtool rewrite which will have broader checks,
whitelist functions and files which cause problems because they do
unusual things with the stack.
These whitelists serve as a TODO list for which functions and files
don't yet have undwarf unwinder coverage. Eventually most of the
whitelists can be removed in favor of manual CFI hint annotations or
objtool improvements.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/7f934a5d707a574bda33ea282e9478e627fb1829.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
A recent commit moved most logic of early boot up from startup_64() written
in assembly to __startup_64() written in C.
Fengguang reported breakage due to the change. It was tracked down to
CONFIG_FUNCTION_TRACER being enabled.
Tracing this function is not possible because it's invoked from the
earliest boot stage before the relocation fixups have been done. It is the
function doing the relocation.
Exclude it from being built with tracer stubs.
Fixes: c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
Reported-by: Fengguang Wu <[email protected]>
Signed-off-by: Kirill A. Shutemov <[email protected]>
Acked-by: Steven Rostedt <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
|
|
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d5597793 ("sched/core: Remove pointless printout in
sched_show_task()"). Remove the implementations as well.
Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.
Signed-off-by: Tobias Klauser <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
And instead wire it up as method for all the dma_map_ops instances.
Note that this also means the arch specific check will be fully instead
of partially applied in the AMD iommu driver.
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
AMD systems support the Monitor/Mwait instructions and these can be used
for ACPI C1 in the same way as on Intel systems.
Three things are needed:
1) This patch.
2) BIOS that declares a C1 state in _CST to use FFH, with correct values.
3) CPUID_Fn00000005_EDX is non-zero on the system.
The BIOS on AMD systems have historically not defined a C1 state in _CST,
so the acpi_idle driver uses HALT for ACPI C1.
Currently released systems have CPUID_Fn00000005_EDX as reserved/RAZ. If a
BIOS is released for these systems that requests a C1 state with FFH, the
FFH implementation in Linux will fail since CPUID_Fn00000005_EDX is 0. The
acpi_idle driver will then fallback to using HALT for ACPI C1.
Future systems are expected to have non-zero CPUID_Fn00000005_EDX and BIOS
support for using FFH for ACPI C1.
Allow ffh_cstate_init() to succeed on AMD systems.
Tested on Fam15h and Fam17h systems.
Signed-off-by: Yazen Ghannam <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The goal of this change is to give users a uniform and meaningful
result when they read /sys/...cpufreq/scaling_cur_freq
on modern x86 hardware, as compared to what they get today.
Modern x86 processors include the hardware needed
to accurately calculate frequency over an interval --
APERF, MPERF, and the TSC.
Here we provide an x86 routine to make this calculation
on supported hardware, and use it in preference to any
driver driver-specific cpufreq_driver.get() routine.
MHz is computed like so:
MHz = base_MHz * delta_APERF / delta_MPERF
MHz is the average frequency of the busy processor
over a measurement interval. The interval is
defined to be the time between successive invocations
of aperfmperf_khz_on_cpu(), which are expected to to
happen on-demand when users read sysfs attribute
cpufreq/scaling_cur_freq.
As with previous methods of calculating MHz,
idle time is excluded.
base_MHz above is from TSC calibration global "cpu_khz".
This x86 native method to calculate MHz returns a meaningful result
no matter if P-states are controlled by hardware or firmware
and/or if the Linux cpufreq sub-system is or is-not installed.
When this routine is invoked more frequently, the measurement
interval becomes shorter. However, the code limits re-computation
to 10ms intervals so that average frequency remains meaningful.
Discerning users are encouraged to take advantage of
the turbostat(8) utility, which can gracefully handle
concurrent measurement intervals of arbitrary length.
Signed-off-by: Len Brown <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The MCE severity gives a hint as to how to handle the error. The
notifier blocks can then use the severity to decide on an action.
It's not necessary for machine_check_poll() to filter errors for
the notifier chain, since each block will check its own set of
conditions before handling an error.
Also, there isn't any urgency for machine_check_poll() to make decisions
based on severity like in do_machine_check().
If we can assume that a severity is set then we can use it in more
notifier blocks. For example, the CEC block could check for a "KEEP"
severity rather than checking bits in the status. This isn't possible
now since the severity is not set except for "DEFFRRED/UCNA" errors with
a valid address.
Save the severity since we have it, and let the notifier blocks decide
if they want to do anything.
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
The helper function __load_ucode_amd() and pointer intel_ucode_patch do
not need to be in global scope, so make them static.
Fixes those sparse warnings:
"symbol '__load_ucode_amd' was not declared. Should it be static?"
"symbol 'intel_ucode_patch' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
cpufreq_quick_get() allows cpufreq drivers to over-ride cpu_khz
that is otherwise reported in x86 /proc/cpuinfo "cpu MHz".
There are four problems with this scheme,
any of them is sufficient justification to delete it.
1. Depending on which cpufreq driver is loaded, the behavior
of this field is different.
2. Distros complain that they have to explain to users
why and how this field changes. Distros have requested a constant.
3. The two major providers of this information, acpi_cpufreq
and intel_pstate, both "get it wrong" in different ways.
acpi_cpufreq lies to the user by telling them that
they are running at whatever frequency was last
requested by software.
intel_pstate lies to the user by telling them that
they are running at the average frequency computed
over an undefined measurement. But an average computed
over an undefined interval, is itself, undefined...
4. On modern processors, user space utilities, such as
turbostat(1), are more accurate and more precise, while
supporing concurrent measurement over arbitrary intervals.
Users who have been consulting /proc/cpuinfo to
track changing CPU frequency will be dissapointed that
it no longer wiggles -- perhaps being unaware of the
limitations of the information they have been consuming.
Yes, they can change their scripts to look in sysfs
cpufreq/scaling_cur_frequency. Here they will find the same
data of dubious quality here removed from /proc/cpuinfo.
The value in sysfs will be addressed in a subsequent patch
to address issues 1-3, above.
Issue 4 will remain -- users that really care about
accurate frequency information should not be using either
proc or sysfs kernel interfaces.
They should be using using turbostat(8), or a similar
purpose-built analysis tool.
Signed-off-by: Len Brown <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
If the interrupt destination mode of the APIC is physical then the
effective affinity is restricted to a single CPU.
Mark the interrupt accordingly in the domain allocation code, so the core
code can avoid pointless affinity setting attempts.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Add the effective irq mask update to the apic implementations and enable
effective irq masks for x86.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
The decision to which CPUs an interrupt is effectively routed happens in
the various apic->cpu_mask_to_apicid() implementations
To support effective affinity masks this information needs to be updated in
irq_data. Add a pointer to irq_data to the callbacks and feed it through
the call chain.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
All implementations of apic->cpu_mask_to_apicid_and() and the two incoming
cpumasks to search for the target.
Move that operation to the call site and rename it to cpu_mask_to_apicid()
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
All implementations of apic->cpu_mask_to_apicid_and() mask out the offline
cpus. The callsite already has a mask available, which has the offline CPUs
removed. Use that and remove the extra bits.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Same functionality except the extra bits ored on the apicid.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
No point in having inlines assigned to function pointers at multiple
places. Just bloats the text.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
The generic migration code supports all the required features
already. Remove the x86 specific implementation and use the generic one.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Reorder fixup_irqs() so it matches the flow in the generic migration code.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
If an CPU goes offline, the interrupts are migrated away, but a eventually
pending interrupt move, which has not yet been made effective is kept
pending even if the outgoing CPU is the sole target of the pending affinity
mask. What's worse is, that the pending affinity mask is discarded even if
it would contain a valid subset of the online CPUs.
Use the newly introduced helper to:
- Discard a pending move when the outgoing CPU is the only target in the
pending mask.
- Use the pending mask instead of the affinity mask to find a valid target
for the CPU if the pending mask intersects with the online CPUs.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Use the fwnode to create named irq domains so diagnosis works.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Provide a new interface for creating the iommu remapping domains, so that
the caller can supply a name and a id in order to create named irqdomains.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Use the fwnode to create a named domain so diagnosis works.
Mark the init function __init while at it.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|