| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Not really needed.
Tested-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Yazen Ghannam <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Make the mcelog call a notifier which lands in the injector module and
does the injection. This allows for mce-inject to be a normal kernel
module now.
Tested-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Yazen Ghannam <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Reuse mce_amd_inj's debugfs interface so that mce-inject can
benefit from it too. The old functionality is still preserved under
CONFIG_X86_MCELOG_LEGACY.
Tested-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Yazen Ghannam <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
In the amd_threshold_interrupt() handler, we loop through every possible
block in each bank and rediscover the block's address and if it's valid,
e.g. valid, counter present and not locked.
However, we already have the address saved in the threshold blocks list
for each CPU and bank. The list only contains blocks that have passed
all the valid checks.
Besides the redundancy, there's also a smp_call_function* in
get_block_address() which causes a warning when servicing the interrupt:
WARNING: CPU: 0 PID: 0 at kernel/smp.c:281 smp_call_function_single+0xdd/0xf0
...
Call Trace:
<IRQ>
rdmsr_safe_on_cpu()
get_block_address.isra.2()
amd_threshold_interrupt()
smp_threshold_interrupt()
threshold_interrupt()
because we do get called in an interrupt handler *with* interrupts
disabled, which can result in a deadlock.
Drop the redundant valid checks and move the overflow check, logging and
block reset into a separate function.
Check the first block then iterate over the rest. This procedure is
needed since the first block is used as the head of the list.
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The value of MCA_STATUS is used as the MSR when clearing MCA_STATUS.
This may cause the following warning:
unchecked MSR access error: WRMSR to 0x11b (tried to write 0x0000000000000000)
Call Trace:
<IRQ>
smp_threshold_interrupt()
threshold_interrupt()
Use msr_stat instead which has the MSR address.
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Fixes: 37d43acfd79f ("x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
During early boot, load_ucode_intel_ap() uses __load_ucode_intel()
to obtain a pointer to the relevant microcode patch (embedded in the
initrd), and stores this value in 'intel_ucode_patch' to speed up the
microcode patch application for subsequent CPUs.
On resuming from suspend-to-RAM, however, load_ucode_ap() calls
load_ucode_intel_ap() for each non-boot-CPU. By then the initramfs is
long gone so the pointer stored in 'intel_ucode_patch' no longer points to
a valid microcode patch.
Clear that pointer so that we effectively fall back to the CPU hotplug
notifier callbacks to update the microcode.
Signed-off-by: Dominik Brodowski <[email protected]>
[ Edit and massage commit message. ]
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]> # 4.10..
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
A SoC variant of Geode GX1, notably NSC branded SC1100, seems to
report an inverted Device ID in its DIR0 configuration register,
specifically 0xb instead of the expected 0x4.
Catch this presumably quirky version so it's properly recognized
as GX1 and has its cache switched to write-back mode, which provides
a significant performance boost in most workloads.
SC1100's datasheet "Geode™ SC1100 Information Appliance On a Chip",
states in section 1.1.7.1 "Device ID" that device identification
values are specified in SC1100's device errata. These, however,
seem to not have been publicly released.
Wading through a number of boot logs and /proc/cpuinfo dumps found on
pastebin and blogs, this patch should mostly be relevant for a number
of now admittedly aging Soekris NET4801 and PC Engines WRAP devices,
the latter being the platform this issue was discovered on.
Performance impact was verified using "openssl speed", with
write-back caching scaling throughput between -3% and +41%.
Signed-off-by: Christian Sünkenberg <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
preemptibility bug
With CONFIG_DEBUG_PREEMPT enabled, I get:
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2
Call Trace:
dump_stack
check_preemption_disabled
debug_smp_processor_id
save_microcode_in_initrd_amd
? microcode_init
save_microcode_in_initrd
...
because, well, it says it above, we're using smp_processor_id() in
preemptible code.
But passing the CPU number is not really needed. It is only used to
determine whether we're on the BSP, and, if so, to save the microcode
patch for early loading.
[ We don't absolutely need to do it on the BSP but we do that
customarily there. ]
Instead, convert that function parameter to a boolean which denotes
whether the patch should be saved or not, thereby avoiding the use of
smp_processor_id() in preemptible code.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
mtrr_save_state() is invoked from native_cpu_up() which is in the context
of a CPU hotplug operation and therefor calling get_online_cpus() is
pointless.
While this works in the current get_online_cpus() implementation it
prevents from converting the hotplug locking to percpu rwsems.
Remove it.
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Paul E. McKenney <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Scalable MCA systems have a new MCA_CONFIG register that we use to
configure each bank. We currently use this when we set up thresholding.
However, this is logically separate.
Group all SMCA-related initialization into a single function.
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
We have support for the new SMCA MCA_DE{STAT,ADDR} registers in Linux.
So we've used these registers in place of MCA_{STATUS,ADDR} on SMCA
systems.
However, the guidance for current SMCA implementations of is to continue
using MCA_{STATUS,ADDR} and to use MCA_DE{STAT,ADDR} only if a Deferred
error was not found in the former registers. If we logged a Deferred
error in MCA_STATUS then we should also clear MCA_DESTAT. This also
means we shouldn't clear MCA_CONFIG[LogDeferredInMcaStat].
Rework __log_error() to only log an error and add helpers for the
different error types being logged from the corresponding interrupt
handlers.
Boris: carve out common functionality into a _log_error_bank(). Cleanup
comments, check MCi_STATUS bits before reading MSRs. Streamline flow.
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
The refcount_t type and corresponding API should be used instead
of atomic_t when the variable is used as a reference counter. This
allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Suggested-by: Kees Cook <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Yazen Ghannam <[email protected]>
Cc: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Export the function which checks whether an MCE is a memory error to
other users so that we can reuse the logic. Drop the boot_cpu_data use,
while at it, as mce.cpuvendor already has the CPU vendor in there.
Integrate a piece from a patch from Vishal Verma
<[email protected]> to export it for modules (nfit).
The main reason we're exporting it is that the nfit handler
nfit_handle_mce() needs to detect a memory error properly before doing
its recovery actions.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vishal Verma <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Cc: Tigran Aivazian <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- two boot crash fixes
- unwinder fixes
- kexec related kernel direct mappings enhancements/fixes
- more Clang support quirks
- minor cleanups
- Documentation fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix a typo in Documentation
x86/build: Don't add -maccumulate-outgoing-args w/o compiler support
x86/boot/32: Fix UP boot on Quark and possibly other platforms
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
x86/kexec/64: Use gbpages for identity mappings if available
x86/mm: Add support for gbpages to kernel_ident_mapping_init()
x86/boot: Declare error() as noreturn
x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()
x86/microcode/AMD: Remove redundant NULL check on mc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains two fixes for booting under Xen introduced during this
merge window and two fixes for older problems, where one is just much
more probable due to another merge window change"
* tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: adjust early dom0 p2m handling to xen hypervisor behavior
x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen
xen/x86: Do not call xen_init_time_ops() until shared_info is initialized
x86/xen: fix xsave capability setting
|
|
When running as Xen pv guest X86_BUG_SYSRET_SS_ATTRS must not be set
on AMD cpus.
This bug/feature bit is kind of special as it will be used very early
when switching threads. Setting the bit and clearing it a little bit
later leaves a critical window where things can go wrong. This time
window has enlarged a little bit by using setup_clear_cpu_cap() instead
of the hypervisor's set_cpu_features callback. It seems this larger
window now makes it rather easy to hit the problem.
The proper solution is to never set the bit in case of Xen.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
set_memory_* functions have moved to set_memory.h. Switch to this
explicitly.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Laura Abbott <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We are going to fix a bug introduced by a more recent commit, so
refresh the tree.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware
drivers from Google, more auxdisplay drivers, extcon drivers, fpga
drivers, and a bunch of other driver updates. Nothing major, except if
you happen to have the hardware for these drivers, and then you will
be happy :)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
firmware: google memconsole: Fix return value check in platform_memconsole_init()
firmware: Google VPD: Fix return value check in vpd_platform_init()
goldfish_pipe: fix build warning about using too much stack.
goldfish_pipe: An implementation of more parallel pipe
fpga fr br: update supported version numbers
fpga: region: release FPGA region reference in error path
fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
mei: drop the TODO from samples
firmware: Google VPD sysfs driver
firmware: Google VPD: import lib_vpd source files
misc: lkdtm: Add volatile to intentional NULL pointer reference
eeprom: idt_89hpesx: Add OF device ID table
misc: ds1682: Add OF device ID table
misc: tsl2550: Add OF device ID table
w1: Remove unneeded use of assert() and remove w1_log.h
w1: Use kernel common min() implementation
uio_mf624: Align memory regions to page size and set correct offsets
uio_mf624: Refactor memory info initialization
uio: Allow handling of non page-aligned memory regions
hangcheck-timer: Fix typo in comment
...
|
|
There is no user of x86_hyper->set_cpu_features() any more. Remove it.
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
There is no need to set the same capabilities for each cpu
individually. This can be done for all cpus in platform initialization.
Cc: Alok Kataria <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Acked-by: Alok Kataria <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
All code to support Xen PV will get under this new option. For the
beginning, check for it in the common code.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
As a preparation to splitting the code we need to untangle it:
x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv
xen_platform() -> xen_platform_hvm() and xen_platform_pv()
xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm()
xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm()
Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and
cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant
xen_pv_domain() check can be dropped.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The main x86 MM changes in this cycle were:
- continued native kernel PCID support preparation patches to the TLB
flushing code (Andy Lutomirski)
- various fixes related to 32-bit compat syscall returning address
over 4Gb in applications, launched from 64-bit binaries - motivated
by C/R frameworks such as Virtuozzo. (Dmitry Safonov)
- continued Intel 5-level paging enablement: in particular the
conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)
- x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)
- ... plus misc updates, fixes and cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
x86/mm: Fix flush_tlb_page() on Xen
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm/64: Fix crash in remove_pagetable()
Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
x86/boot/e820: Remove a redundant self assignment
x86/mm: Fix dump pagetables for 4 levels of page tables
x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
x86/espfix: Add support for 5-level paging
x86/kasan: Extend KASAN to support 5-level paging
x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
x86/paravirt: Add 5-level support to the paravirt code
x86/mm: Define virtual memory map for 5-level paging
x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
x86/boot: Detect 5-level paging support
x86/mm/numa: Remove numa_nodemask_from_meminfo()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
"The biggest changes are an extension of the Intel RDT code to extend
it with Intel Memory Bandwidth Allocation CPU support: MBA allows
bandwidth allocation between cores, while CBM (already upstream)
allows CPU cache partitioning.
There's also misc smaller fixes and updates"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/intel_rdt: Return error for incorrect resource names in schemata
x86/intel_rdt: Trim whitespace while parsing schemata input
x86/intel_rdt: Fix padding when resource is enabled via mount
x86/intel_rdt: Get rid of anon union
x86/cpu: Keep model defines sorted by model number
x86/intel_rdt/mba: Add schemata file support for MBA
x86/intel_rdt: Make schemata file parsers resource specific
x86/intel_rdt/mba: Add info directory files for Memory Bandwidth Allocation
x86/intel_rdt: Make information files resource specific
x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)
x86/intel_rdt/mba: Memory bandwith allocation feature detect
x86/intel_rdt: Add resource specific msr update function
x86/intel_rdt: Move CBM specific data into a struct
x86/intel_rdt: Cleanup namespace to support multiple resource types
Documentation, x86: Intel Memory bandwidth allocation
x86/intel_rdt: Organize code properly
x86/intel_rdt: Init padding only if a device exists
x86/intel_rdt: Add cpus_list rdtgroup file
x86/intel_rdt: Cleanup kernel-doc
x86/intel_rdt: Update schemata read to show data in tabular format
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The biggest changes in this cycle were:
- reworking of the e820 code: separate in-kernel and boot-ABI data
structures and apply a whole range of cleanups to the kernel side.
No change in functionality.
- enable KASLR by default: it's used by all major distros and it's
out of the experimental stage as well.
- ... misc fixes and cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
x86/reboot: Turn off KVM when halting a CPU
x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
x86: Enable KASLR by default
boot/param: Move next_arg() function to lib/cmdline.c for later reuse
x86/boot: Fix Sparse warning by including required header file
x86/boot/64: Rename start_cpu()
x86/xen: Update e820 table handling to the new core x86 E820 code
x86/boot: Fix pr_debug() API braindamage
xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h>
x86/boot/e820: Simplify e820__update_table()
x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures
x86/boot/e820: Fix and clean up e820_type switch() statements
x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
x86/boot/e820: Remove unnecessary #include's
x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
x86/boot/e820: Use bool in query APIs
x86/boot/e820: Document e820__reserve_setup_data()
x86/boot/e820: Clean up __e820__update_table() et al
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- add the 'Corrected Errors Collector' kernel feature which collect
and monitor correctable errors statistics and will preemptively
(soft-)offline physical pages that have a suspiciously high error
count.
- handle MCE errors during kexec() more gracefully
- factor out and deprecate the /dev/mcelog driver
- ... plus misc fixes and cleanpus"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only
ACPI/APEI: Use setup_deferrable_timer()
x86/mce: Update notifier priority check
x86/mce: Enable PPIN for Knights Landing/Mill
x86/mce: Do not register notifiers with invalid prio
x86/mce: Factor out and deprecate the /dev/mcelog driver
RAS: Add a Corrected Errors Collector
x86/mce: Rename mce_log to mce_log_buffer
x86/mce: Rename mce_log()'s argument
x86/mce: Init some CPU features early
x86/mce: Handle broadcasted MCE gracefully with kexec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pul x86/process updates from Ingo Molnar:
"The main change in this cycle was to add the ARCH_[GET|SET]_CPUID
prctl() ABI extension to control the availability of the CPUID
instruction, analogously to the existing PR_GET|SET_TSC ABI that
controls RDTSC.
Motivation: the 'rr' user-space record-and-replay execution debugger
would like to trap and emulate the CPUID instruction - which
instruction is normally unprivileged.
Trapping CPUID is possible on IvyBridge and later Intel CPUs - expose
this hardware capability"
* 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/syscalls/32: Ignore arch_prctl for other architectures
um/arch_prctl: Fix fallout from x86 arch_prctl() rework
x86/arch_prctl: Add ARCH_[GET|SET]_CPUID
x86/cpufeature: Detect CPUID faulting support
x86/syscalls/32: Wire up arch_prctl on x86-32
x86/arch_prctl: Add do_arch_prctl_common()
x86/arch_prctl/64: Rename do_arch_prctl() to do_arch_prctl_64()
x86/arch_prctl/64: Use SYSCALL_DEFINE2 to define sys_arch_prctl()
x86/arch_prctl: Rename 'code' argument to 'option'
x86/msr: Rename MISC_FEATURE_ENABLES to MISC_FEATURES_ENABLES
x86/process: Optimize TIF_NOTSC switch
x86/process: Correct and optimize TIF_BLOCKSTEP switch
x86/process: Optimize TIF checks in __switch_to_xtra()
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
When schemata parses the resource names it does not return an error if it
detects incorrect resource names and fails quietly.
This happens because for_each_enabled_rdt_resource(r) leaves "r" pointing
beyond the end of the rdt_resources_all[] array, and the check for !r->name
results in an out of bounds access.
Split the resource parsing part into a helper function to avoid the issue.
[ tglx: Made it readable by splitting the parser loop out into a function ]
Reported-by: Prakhya, Sai Praneeth <[email protected]>
Signed-off-by: Vikas Shivappa <[email protected]>
Tested-by: Prakhya, Sai Praneeth <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Schemata is displayed in tabular format which introduces some whitespace
to show data in a tabular format.
Writing back the same data fails as the parser does not handle the
whitespace.
Trim the leading and trailing whitespace before parsing.
Reported-by: Prakhya, Sai Praneeth <[email protected]>
Signed-off-by: Vikas Shivappa <[email protected]>
Tested-by: Prakhya, Sai Praneeth <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Currently max width of 'resource name' and 'resource data' is being
initialized based on 'enabled resources' during boot. But the mount can
enable different capable resources at a later time which upsets the
tabular format of schemata. Fix this to be based on 'all capable'
resources.
Signed-off-by: Vikas Shivappa <[email protected]>
Tested-by: Prakhya, Sai Praneeth <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
mce_usable_address() does a bunch of basic sanity checks to verify
whether the address reported with the error is usable for further
processing. However, we do check MCi_STATUS[MISCV] and that is not
needed on AMD as that bit says that there's additional information about
the logged error in the MCi_MISCj banks.
But we don't need that to know whether the address is usable - we only
need to know whether the physical address is valid - i.e., ADDRV.
On Intel the MISCV bit is needed to perform additional checks to determine
whether the reported address is a physical one, etc.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Yazen Ghannam <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
The NFIT MCE handler callback (for handling media errors on NVDIMMs)
takes a mutex to add the location of a memory error to a list. But since
the notifier call chain for machine checks (x86_mce_decoder_chain) is
atomic, we get a lockdep splat like:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 0, pid: 4, name: kworker/0:0
[..]
Call Trace:
dump_stack
___might_sleep
__might_sleep
mutex_lock_nested
? __lock_acquire
nfit_handle_mce
notifier_call_chain
atomic_notifier_call_chain
? atomic_notifier_call_chain
mce_gen_pool_process
Convert the notifier to a blocking one which gets to run only in process
context.
Boris: remove the notifier call in atomic context in print_mce(). For
now, let's print the MCE on the atomic path so that we can make sure
they go out and get logged at least.
Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Ross Zwisler <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Acked-by: Tony Luck <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: linux-edac <[email protected]>
Cc: x86-ml <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Update the check which enforces the registration of MCE decoder notifier
callbacks with valid priority only, to include mcelog's priority.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add support to update the MBA bandwidth values for the domains via the
schemata file.
- Verify that the bandwidth value is valid
- Round to the next control step depending on the bandwidth granularity of
the hardware
- Convert the bandwidth to delay values and write the delay values to
the corresponding domain PQOS_MSRs.
[ tglx: Massaged changelog ]
Signed-off-by: Vikas Shivappa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
The schemata files are the user space interface to update resource
controls. The parser is hardwired to support only cache resources, which do
not fit the requirements of memory resources.
Add a function pointer for a parser to the struct rdt_resource and switch
the cache parsing over.
[ tglx: Massaged changelog ]
Signed-off-by: Vikas Shivappa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
The files in the info directory for MBA are as follows:
num_closids
The maximum number of CLOSids available for MBA
min_bandwidth
The minimum memory bandwidth percentage value
bandwidth_gran
The granularity of the bandwidth control in percent for the
particular CPU SKU. Intermediate values entered are rounded off
to the previous control step available. Available bandwidth
control steps are minimum_bandwidth + N * bandwidth_gran.
delay_linear
When set, the OS writes a linear percentage based value to the
control MSRs ranging from minimum_bandwidth to 100 percent.
This value is informational and has no influence on the values
written to the schemata files. The values written to the
schemata are always bandwidth percentage that is requested.
Signed-off-by: Vikas Shivappa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Cache allocation and memory bandwidth allocation require different
information files in the resctrl/info directory, but the current
implementation does not allow to have files per resource.
Add the necessary fields to the resource struct and assign the files
dynamically depending on the resource type.
Signed-off-by: Vikas Shivappa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
The MBA feature details like minimum bandwidth supported, bandwidth
granularity etc are obtained via executing CPUID with EAX=10H ,ECX=3.
Setup and initialize the MBA specific extensions to data structures like
global list of RDT resources, RDT resource structure and RDT domain
structure.
[ tglx: Split out the seperate structure and the CBM related parts ]
Signed-off-by: Vikas Shivappa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Detect MBA feature if CPUID.(EAX=10H, ECX=0):EBX.L2[bit 3] = 1.
Add supporting data structures to detect feature details which is done
in later patch using CPUID with EAX=10H, ECX= 3.
Signed-off-by: Vikas Shivappa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Updating of Cache and Memory bandwidth QOS MSRs is different.
Add a function pointer to struct rdt_resource and convert the cache part
over.
Based on Vikas all in one patch^Wmess.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
Memory bandwidth allocation requires different information than cache
allocation.
To avoid a lump of data in struct rdt_resource, move all cache related
information into a seperate structure and add that to struct rdt_resource.
Sanitize the data types while at it.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
Lot of data structures and functions are named after cache specific
resources(named after cbm, cache etc). In many cases other non cache
resources may need to share the same data structures/functions.
Generalize such naming to prepare to add more resources like memory
bandwidth.
Signed-off-by: Vikas Shivappa <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Having init functions at random places in the middle of the code is
unintuitive.
Move them close to the init routine and mark them __init.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
If no device exists it's pointless to calculate the padding data for the
schemata files.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
Intel Xeon Phi processors (KNL and KNM) support PPIN as well, so add their
CPUIDs to the whitelist of supported processors.
Signed-off-by: Piotr Luc <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Conflicts:
arch/x86/kernel/cpu/intel_rdt_schemata.c
Signed-off-by: Ingo Molnar <[email protected]>
|