| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use num_online_cpus() directly.
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The bitmap is a single unsigned long so no need for the function call.
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
MCA handlers check the valid bit in each status register
(MCA_STATUS[Val]) and continue processing the error only if the valid
bit is set.
Set the valid bit unconditionally in the corresponding MCA_STATUS
register and correct any Val=0 injections made by the user as such
errors will get ignored and such injections will be largely pointless.
Signed-off-by: Smita Koralahalli <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The MCA_IPID register uniquely identifies a bank's type on Scalable MCA
(SMCA) systems. When an MCA bank is not populated, the MCA_IPID register
will read as zero and writes to it will be ignored.
On a hw-type error injection (injection which writes the actual MCA
registers in an attempt to cause a real MCE) check the value of this
register before trying to inject the error.
Do not impose any limitations on a sw injection and allow the user to
test out all the decoding paths without relying on the available hardware,
as its purpose is to just test the code.
[ bp: Heavily massage. ]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Smita Koralahalli <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Get rid of cpu_missing because
7bb39313cd62 ("x86/mce: Make mce_timed_out() identify holdout CPUs")
provides a more detailed message about which CPUs are missing.
Suggested-by: Borislav Petkov <[email protected]>
Signed-off-by: Zhaolong Zhang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The address translation code used for current AMD systems is
non-architectural. So move it to EDAC.
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add the model number of a new, Raptor Lake CPU, to intel-family.h
- Do not log spurious corrected MCEs on SKL too, due to an erratum
- Clarify the path of paravirt ops patches upstream
- Add an optimization to avoid writing out AMX components to sigframes
when former are in init state
* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Raptor Lake to Intel family
x86/mce: Add errata workaround for Skylake SKX37
MAINTAINERS: Add some information to PARAVIRT_OPS entry
x86/fpu: Optimize out sigframe xfeatures when in init state
|
|
Errata SKX37 is word-for-word identical to the other errata listed in
this workaround. I happened to notice this after investigating a CMCI
storm on a Skylake host. While I can't confirm this was the root cause,
spurious corrected errors does sound like a likely suspect.
Fixes: 2976908e4198 ("x86/mce: Do not log spurious corrected mce errors")
Signed-off-by: Dave Jones <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Pull drm updates from Dave Airlie:
"Summary below. i915 starts to add support for DG2 GPUs, enables DG1
and ADL-S support by default, lots of work to enable DisplayPort 2.0
across drivers. Lots of documentation updates and fixes across the
board.
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB"
* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
drm/amd/display: MST support for DPIA
drm/amdgpu: Fix even more out of bound writes from debugfs
drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
drm/amdgpu/UAPI: rearrange header to better align related items
drm/amd/display: Enable dpia in dmub only for DCN31 B0
drm/amd/display: Fix USB4 hot plug crash issue
drm/amd/display: Fix deadlock when falling back to v2 from v3
drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
drm/amd/display: move FPU associated DCN301 code to DML folder
drm/amd/display: fix link training regression for 1 or 2 lane
drm/amd/display: add two lane settings training options
drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
drm/amd/display: implement decide lane settings
drm/amd/display: adopt DP2.0 LT SCR revision 8
drm/amd/display: FEC configuration for dpia links in MST mode
drm/amd/display: FEC configuration for dpia links
drm/amd/display: Add workaround flag for EDID read on certain docks
drm/amd/display: Set phy_mux_sel bit in dmub scratch register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Get rid of a bunch of function pointers used in MCA land in favor of
normal functions. This is in preparation of making the MCA code
noinstr-aware
- When the kernel copies data from user addresses and it encounters a
machine check, a SIGBUS is sent to that process. Change this action
to either an -EFAULT which is returned to the user or a short write,
making the recovery action a lot more user-friendly
* tag 'ras_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Sort mca_config members to get rid of unnecessary padding
x86/mce: Get rid of the ->quirk_no_way_out() indirect call
x86/mce: Get rid of msr_ops
x86/mce: Get rid of machine_check_vector
x86/mce: Get rid of the mce_severity function pointer
x86/mce: Drop copyin special case for #MC
x86/mce: Change to not send SIGBUS error during copy from user
|
|
Resolve the conflict between these commits:
x86/fpu: 1193f408cd51 ("x86/fpu/signal: Change return type of __fpu_restore_sig() to boolean")
x86/urgent: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits")
b2381acd3fd9 ("x86/fpu: Mask out the invalid MXCSR bits properly")
Conflicts:
arch/x86/kernel/fpu/signal.c
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Export smca_get_bank_type for use in the AMD GPU
driver to determine MCA bank while handling correctable
and uncorrectable errors in GPU UMC.
Signed-off-by: Mukul Joshi <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
$ pahole -C mca_config arch/x86/kernel/cpu/mce/core.o
before:
/* size: 40, cachelines: 1, members: 16 */
/* sum members: 21, holes: 1, sum holes: 3 */
/* sum bitfield members: 64 bits, bit holes: 2, sum bit holes: 32 bits */
/* padding: 4 */
/* last cacheline: 40 bytes */
after:
/* size: 32, cachelines: 1, members: 16 */
/* padding: 3 */
/* last cacheline: 32 bytes */
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Use a flag setting to call the only quirk function for that.
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Avoid having indirect calls and use a normal function which returns the
proper MSR address based on ->smca setting.
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Get rid of the indirect function pointer and use flags settings instead
to steer execution.
Now that it is not an indirect call any longer, drop the instrumentation
annotation for objtool too.
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Turn it into a normal function which calls an AMD- or Intel-specific
variant depending on the CPU it runs on.
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Sending a SIGBUS for a copy from user is not the correct semantic.
System calls should return -EFAULT (or a short count for write(2)).
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
There are two cases for machine check recovery:
1) The machine check was triggered by ring3 (application) code.
This is the simpler case. The machine check handler simply queues
work to be executed on return to user. That code unmaps the page
from all users and arranges to send a SIGBUS to the task that
triggered the poison.
2) The machine check was triggered in kernel code that is covered by
an exception table entry. In this case the machine check handler
still queues a work entry to unmap the page, etc. but this will
not be called right away because the #MC handler returns to the
fix up code address in the exception table entry.
Problems occur if the kernel triggers another machine check before the
return to user processes the first queued work item.
Specifically, the work is queued using the ->mce_kill_me callback
structure in the task struct for the current thread. Attempting to queue
a second work item using this same callback results in a loop in the
linked list of work functions to call. So when the kernel does return to
user, it enters an infinite loop processing the same entry for ever.
There are some legitimate scenarios where the kernel may take a second
machine check before returning to the user.
1) Some code (e.g. futex) first tries a get_user() with page faults
disabled. If this fails, the code retries with page faults enabled
expecting that this will resolve the page fault.
2) Copy from user code retries a copy in byte-at-time mode to check
whether any additional bytes can be copied.
On the other side of the fence are some bad drivers that do not check
the return value from individual get_user() calls and may access
multiple user addresses without noticing that some/all calls have
failed.
Fix by adding a counter (current->mce_count) to keep track of repeated
machine checks before task_work() is called. First machine check saves
the address information and calls task_work_add(). Subsequent machine
checks before that task_work call back is executed check that the address
is in the same page as the first machine check (since the callback will
offline exactly one page).
Expected worst case is four machine checks before moving on (e.g. one
user access with page faults disabled, then a repeat to the same address
with page faults enabled ... repeat in copy tail bytes). Just in case
there is some code that loops forever enforce a limit of 10.
[ bp: Massage commit message, drop noinstr, fix typo, extend panic
messages. ]
Fixes: 5567d11c21a1 ("x86/mce: Send #MC singal from task work")
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/YT/[email protected]
|
|
Now that the MC safe copy and FPU have been converted to use the MCE safe
fixup types remove EX_TYPE_FAULT from the list of types which MCE considers
to be safe to be recovered in kernel.
This removes the SGX exception handling of ENCLS from the #MC safe
handling, but according to the SGX wizards the current SGX implementations
cannot survive #MC on ENCLS:
https://lore.kernel.org/r/[email protected]
The code relies on the trap number being stored if ENCLS raised an
exception. That's still working, but it does no longer trick the MCE code
into assuming that #MC is handled correctly for ENCLS.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Provide exception fixup types which can be used to identify fixups which
allow in kernel #MC recovery and make them invoke the existing handlers.
These will be used at places where #MC recovery is handled correctly by the
caller.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The exception table entries contain the instruction address, the fixup
address and the handler address. All addresses are relative. Storing the
handler address has a few downsides:
1) Most handlers need to be exported
2) Handlers can be defined everywhere and there is no overview about the
handler types
3) MCE needs to check the handler type to decide whether an in kernel #MC
can be recovered. The functionality of the handler itself is not in any
way special, but for these checks there need to be separate functions
which in the worst case have to be exported.
Some of these 'recoverable' exception fixups are pretty obscure and
just reuse some other handler to spare code. That obfuscates e.g. the
#MC safe copy functions. Cleaning that up would require more handlers
and exports
Rework the exception fixup mechanics by storing a fixup type number instead
of the handler address and invoke the proper handler for each fixup
type. Also teach the extable sort to leave the type field alone.
This makes most handlers static except for special cases like the MCE
MSR fixup and the BPF fixup. This allows to add more types for cleaning up
the obscure places without adding more handler code and exports.
There is a marginal code size reduction for a production config and it
removes _eight_ exported symbols.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
and the random number of tabs.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Prepare code for further simplification. No functional change.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"The usual round of minor cleanups and fixes"
* tag 'x86_cleanups_for_v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kaslr: Have process_mem_region() return a boolean
x86/power: Fix kernel-doc warnings in cpu.c
x86/mce/inject: Replace deprecated CPU-hotplug functions.
x86/microcode: Replace deprecated CPU-hotplug functions.
x86/mtrr: Replace deprecated CPU-hotplug functions.
x86/mmiotrace: Replace deprecated CPU-hotplug functions.
|
|
When a fatal machine check results in a system reset, Linux does not
clear the error(s) from machine check bank(s) - hardware preserves the
machine check banks across a warm reset.
During initialization of the kernel after the reboot, Linux reads, logs,
and clears all machine check banks.
But there is a problem. In:
5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver")
the call to mce_register_decode_chain() moved later in the boot
sequence. This means that /dev/mcelog doesn't see those early error
logs.
This was partially fixed by:
cd9c57cad3fe ("x86/MCE: Dump MCE to dmesg if no consumers")
which made sure that the logs were not lost completely by printing
to the console. But parsing console logs is error prone. Users of
/dev/mcelog should expect to find any early errors logged to standard
places.
Add a new flag MCP_QUEUE_LOG to machine_check_poll() to be used in early
machine check initialization to indicate that any errors found should
just be queued to genpool. When mcheck_late_init() is called it will
call mce_schedule_work() to actually log and flush any errors queued in
the genpool.
[ Based on an original patch, commit message by and completely
productized by Tony Luck. ]
Fixes: 5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver")
Reported-by: Sumanth Kamatala <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <[email protected]>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
Now an action required MCE in already hwpoisoned address surely sends a
SIGBUS to current process, but the SIGBUS doesn't convey error virtual
address. That's not optimal for hwpoison-aware applications.
To fix the issue, make memory_failure() call kill_accessing_process(),
that does pagetable walk to find the error virtual address. It could find
multiple virtual addresses for the same error page, and it seems hard to
tell which virtual address is correct one. But that's rare and sending
incorrect virtual address could be better than no address. So let's
report the first found virtual address for now.
[[email protected]: fix walk_page_range() return]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Aili Yao <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Jue Wang <[email protected]>
Cc: Borislav Petkov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When BIOS reports memory errors to Linux using the ACPI/APEI
error reporting method Linux creates a "struct mce" to pass
to the normal reporting code path.
The constructed record doesn't include a value for the "misc"
field of the structure, and so mce_usable_address() says this
record doesn't include a valid address.
Net result is that functions like uc_decode_notifier() will
just ignore this record instead of taking action to offline
a page.
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Add the (HWID, MCATYPE) tuples and names for new SMCA bank types.
Also, add their respective error descriptions to the MCE decoding module
edac_mce_amd. Also while at it, optimize the string names for some SMCA
banks.
[ bp: Drop repeated comments, explain why UMC_V2 is a separate entry. ]
Signed-off-by: Muralidhara M K <[email protected]>
Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Yazen Ghannam <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Borislav Petkov:
- Turn the stack canary into a normal __percpu variable on 32-bit which
gets rid of the LAZY_GS stuff and a lot of code.
- Add an insn_decode() API which all users of the instruction decoder
should preferrably use. Its goal is to keep the details of the
instruction decoder away from its users and simplify and streamline
how one decodes insns in the kernel. Convert its users to it.
- kprobes improvements and fixes
- Set the maximum DIE per package variable on Hygon
- Rip out the dynamic NOP selection and simplify all the machinery
around selecting NOPs. Use the simplified NOPs in objtool now too.
- Add Xeon Sapphire Rapids to list of CPUs that support PPIN
- Simplify the retpolines by folding the entire thing into an
alternative now that objtool can handle alternatives with stack ops.
Then, have objtool rewrite the call to the retpoline with the
alternative which then will get patched at boot time.
- Document Intel uarch per models in intel-family.h
- Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
exception on Intel.
* tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
x86, sched: Treat Intel SNC topology as default, COD as exception
x86/cpu: Comment Skylake server stepping too
x86/cpu: Resort and comment Intel models
objtool/x86: Rewrite retpoline thunk calls
objtool: Skip magical retpoline .altinstr_replacement
objtool: Cache instruction relocs
objtool: Keep track of retpoline call sites
objtool: Add elf_create_undef_symbol()
objtool: Extract elf_symbol_add()
objtool: Extract elf_strtab_concat()
objtool: Create reloc sections implicitly
objtool: Add elf_create_reloc() helper
objtool: Rework the elf_rebuild_reloc_section() logic
objtool: Fix static_call list generation
objtool: Handle per arch retpoline naming
objtool: Correctly handle retpoline thunk calls
x86/retpoline: Simplify retpolines
x86/alternatives: Optimize optimize_nops()
x86: Add insn_decode_kernel()
x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 cleanups from Borislav Petkov:
"Trivial cleanups and fixes all over the place"
* tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove me from IDE/ATAPI section
x86/pat: Do not compile stubbed functions when X86_PAT is off
x86/asm: Ensure asm/proto.h can be included stand-alone
x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files
x86/msr: Make locally used functions static
x86/cacheinfo: Remove unneeded dead-store initialization
x86/process/64: Move cpu_current_top_of_stack out of TSS
tools/turbostat: Unmark non-kernel-doc comment
x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL()
x86/fpu/math-emu: Fix function cast warning
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
x86: Fix various typos in comments, take #2
x86: Remove unusual Unicode characters from comments
x86/kaslr: Return boolean values from a function returning bool
x86: Fix various typos in comments
x86/setup: Remove unused RESERVE_BRK_ARRAY()
stacktrace: Move documentation for arch_stack_walk_reliable() to header
x86: Remove duplicate TSC DEADLINE MSR definitions
|
|
a semantic conflict
Conflict-merge this main commit in essence:
a89dfde3dc3c: ("x86: Remove dynamic NOP selection")
With this upstream commit:
b90829704780: ("bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG")
Semantic merge conflict:
arch/x86/net/bpf_jit_comp.c
- memcpy(prog, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE);
+ memcpy(prog, x86_nops[5], X86_PATCH_SIZE);
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add a helper to decode kernel instructions; there's no point in
endlessly repeating those last two arguments.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Add an injection file in order to specify the IPID too when injecting
an error. One use case example is using the machinery to decode MCEs
collected from other machines.
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Fix another ~42 single-word typos in arch/x86/ code comments,
missed a few in the first pass, in particular in .S files.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
|
|
New CPU model, same MSRs to control and read the inventory number.
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
|
|
Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- move therm_throt.c to the thermal framework, where it belongs.
- identify CPUs which miss to enter the broadcast handler, as an
additional debugging aid.
* tag 'ras_updates_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
thermal: Move therm_throt there from x86/mce
x86/mce: Get rid of mcheck_intel_therm_init()
x86/mce: Make mce_timed_out() identify holdout CPUs
|
|
This functionality has nothing to do with MCE, move it to the thermal
framework and untangle it from MCE.
Requested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Srinivas Pandruvada <[email protected]>
Tested-by: Srinivas Pandruvada <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Move the APIC_LVTTHMR read which needs to happen on the BSP, to
intel_init_thermal(). One less boot dependency.
No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Srinivas Pandruvada <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
There's some explicit tracing left in exc_machine_check_kernel(),
remove it, as it's already implied by irqentry_nmi_enter().
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The
"Timeout: Not all CPUs entered broadcast exception handler"
message will appear from time to time given enough systems, but this
message does not identify which CPUs failed to enter the broadcast
exception handler. This information would be valuable if available,
for example, in order to correlate with other hardware-oriented error
messages.
Add a cpumask of CPUs which maintains which CPUs have entered this
handler, and print out which ones failed to enter in the event of a
timeout.
[ bp: Massage. ]
Reported-by: Jonathan Lemon <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/20210106174102.GA23874@paulmck-ThinkPad-P72
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/exit updates from Thomas Gleixner:
"A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for
non-x86 specific TIF flags which are solely relevant for syscall
related work and have been moved into their own storage space. The
x86 specific part had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is
going to come seperate via Jens.
- The selective syscall redirection facility which provides a clean
and efficient way to support the non-Linux syscalls of WINE by
catching them at syscall entry and redirecting them to the user
space emulation. This can be utilized for other purposes as well
and has been designed carefully to avoid overhead for the regular
fastpath. This includes the core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the
users of the generic entry code which guarantee the proper ordering
and protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall
restart mechanism"
* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
entry: Add syscall_exit_to_user_mode_work()
entry: Add exit_to_user_mode() wrapper
entry_Add_enter_from_user_mode_wrapper
entry: Rename exit_to_user_mode()
entry: Rename enter_from_user_mode()
docs: Document Syscall User Dispatch
selftests: Add benchmark for syscall user dispatch
selftests: Add kselftest for syscall user dispatch
entry: Support Syscall User Dispatch on common syscall entry
kernel: Implement selective syscall userspace redirection
signal: Expose SYS_USER_DISPATCH si_code type
x86: vdso: Expose sigreturn address on vdso to the kernel
MAINTAINERS: Add entry for common entry code
entry: Fix boot for !CONFIG_GENERIC_ENTRY
x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
sched: Detect call to schedule from critical entry code
context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
x86: Reclaim unused x86 TI flags
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
"Only AMD-specific changes this time:
- Save the AMD physical die ID into cpuinfo_x86.cpu_die_id and
convert all code to use it (Yazen Ghannam)
- Remove a dead and unused TSEG region remapping workaround on AMD
(Arvind Sankar)"
* tag 'x86_cpu_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Remove dead code for TSEG region remapping
x86/topology: Set cpu_die_id only if DIE_TYPE found
EDAC/mce_amd: Use struct cpuinfo_x86.cpu_die_id for AMD NodeId
x86/CPU/AMD: Remove amd_get_nb_id()
x86/CPU/AMD: Save AMD NodeId as cpu_die_id
|
|
Currently, if an MCE happens in user-mode or while the kernel is copying
data from user space, 'kill_it' is used to check if execution of the
interrupted task can be recovered or not; the flag name however is not
very meaningful, hence rename it to match its goal.
[ bp: Massage commit message, rename the queue_task_work() arg too. ]
Signed-off-by: Gabriele Paoloni <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Currently, __mc_scan_banks() in do_machine_check() does the following
callchain:
__mc_scan_banks()->mce_log()->irq_work_queue(&mce_irq_work).
Hence, the call to irq_work_queue() below after __mc_scan_banks()
seems redundant. Just remove it.
Signed-off-by: Gabriele Paoloni <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Right now for LMCE, if no_way_out is set, mce_panic() is called
regardless of mca_cfg.tolerant. This is not correct as, if
mca_cfg.tolerant = 3, the code should never panic.
Add that check.
[ bp: use local ptr 'cfg'. ]
Signed-off-by: Gabriele Paoloni <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|