aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/include
AgeCommit message (Collapse)AuthorFilesLines
2020-06-11x86/entry: __always_inline CR2 for noinstrPeter Zijlstra3-6/+6
vmlinux.o: warning: objtool: exc_page_fault()+0x9: call to read_cr2() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_page_fault()+0x24: call to prefetchw() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_page_fault()+0x21: call to kvm_handle_async_pf.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_nmi()+0x1cc: call to write_cr2() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: __always_inline arch_atomic_* for noinstrPeter Zijlstra1-7/+7
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0x33: call to arch_atomic_and.constprop.0() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: __always_inline irqflags for noinstrPeter Zijlstra1-10/+10
vmlinux.o: warning: objtool: lockdep_hardirqs_on()+0x65: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lockdep_hardirqs_off()+0x5d: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x35: call to arch_local_irq_save() leaves .noinstr.text section vmlinux.o: warning: objtool: check_preemption_disabled()+0x31: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: check_preemption_disabled()+0x33: call to arch_irqs_disabled_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x2f: call to native_irq_disable() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: __always_inline debugreg for noinstrPeter Zijlstra1-3/+3
vmlinux.o: warning: objtool: exc_debug()+0x21: call to native_get_debugreg() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/idt: Consolidate idt functionalityThomas Gleixner1-15/+2
- Move load_current_idt() out of line and replace the hideous comment with a lockdep assert. This allows to make idt_table and idt_descr static. - Mark idt_table read only after the IDT initialization is complete. - Shuffle code around to consolidate the #ifdef sections into one. - Adapt the F00F bug code. Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Clarify irq_{enter,exit}_rcu()Peter Zijlstra1-2/+0
Because: irq_enter_rcu() includes lockdep_hardirq_enter() irq_exit_rcu() does *NOT* include lockdep_hardirq_exit() Which resulted in two 'stray' lockdep_hardirq_exit() calls in idtentry.h, and me spending a long time trying to find the matching enter calls. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Remove DBn stacksPeter Zijlstra1-9/+3
Both #DB itself, as all other IST users (NMI, #MC) now clear DR7 on entry. Combined with not allowing breakpoints on entry/noinstr/NOKPROBE text and no single step (EFLAGS.TF) inside the #DB handler should guarantee no nested #DB. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Remove debug IDT frobbingPeter Zijlstra2-52/+1
This is all unused now. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Optimize local_db_save() for virtPeter Zijlstra1-1/+4
Because DRn access is 'difficult' with virt; but the DR7 read is cheaper than a cacheline miss on native, add a virt specific fast path to local_db_save(), such that when breakpoints are not in use to avoid touching DRn entirely. Suggested-by: Andy Lutomirski <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Introduce local_db_{save,restore}()Peter Zijlstra1-0/+30
In order to allow other exceptions than #DB to disable breakpoints, provide common helpers. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Remove the TRACE_IRQS cruftThomas Gleixner1-10/+0
No more users. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Remove the apic/BUILD interrupt leftoversThomas Gleixner1-12/+0
Remove all the code which was there to emit the system vector stubs. All users are gone. Move the now unused GET_CR2_INTO macro muck to head_64.S where the last user is. Fixup the eye hurting comment there while at it. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert reschedule interrupt to IDTENTRY_SYSVEC_SIMPLEThomas Gleixner5-26/+2
The scheduler IPI does not need the full interrupt entry handling logic when the entry is from kernel mode. Use IDTENTRY_SYSVEC_SIMPLE and spare all the overhead. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert XEN hypercall vector to IDTENTRY_SYSVECThomas Gleixner1-0/+4
Convert the last oldstyle defined vector to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes Fixup the related XEN code by providing the primary C entry point in x86 to avoid cluttering the generic code with X86'isms. No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVECThomas Gleixner4-44/+10
Convert various hypervisor vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Reviewed-by: Wei Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert KVM vectors to IDTENTRY_SYSVEC*Thomas Gleixner4-14/+6
Convert KVM specific system vectors to IDTENTRY_SYSVEC*: The two empty stub handlers which only increment the stats counter do no need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them. The wakeup handler does more work and runs on the interrupt stack. None of these handlers need to save and restore the irq_regs pointer. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Paolo Bonzini <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert various system vectorsThomas Gleixner7-56/+24
Convert various system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert SMP system vectors to IDTENTRY_SYSVECThomas Gleixner4-11/+7
Convert SMP system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert APIC interrupts to IDTENTRY_SYSVECThomas Gleixner5-13/+8
Convert APIC interrupts to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Provide IDTENTRY_SYSVECThomas Gleixner1-0/+79
Provide IDTENTRY variants for system vectors to consolidate the different mechanisms to emit the ASM stubs for 32- and 64-bit. On 64-bit this also moves the stack switching from ASM to C code. 32-bit will excute the system vectors w/o stack switching as before. The simple variant is meant for "empty" system vectors like scheduler IPI and KVM posted interrupt vectors. These do not need the full glory of irq enter/exit handling with softirq processing and more. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Use idtentry for interruptsThomas Gleixner3-4/+8
Replace the extra interrupt handling code and reuse the existing idtentry machinery. This moves the irq stack switching on 64-bit from ASM to C code; 32-bit already does the stack switching in C. This requires to remove HAVE_IRQ_EXIT_ON_IRQ_STACK as the stack switch is not longer in the low level entry code. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Add IRQENTRY_IRQ macroThomas Gleixner1-0/+49
Provide a seperate IDTENTRY macro for device interrupts. Similar to IDTENTRY_ERRORCODE with the addition of invoking irq_enter/exit_rcu() and providing the errorcode as a 'u8' argument to the C function, which truncates the sign extended vector number. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/irq: Rework handle_irq() for 64-bitThomas Gleixner1-1/+1
To consolidate the interrupt entry/exit code vs. the other exceptions make handle_irq() an inline and handle both 64-bit and 32-bit mode. Preparatory change to move irq stack switching for 64-bit to C which allows to consolidate the entry exit handling by reusing the idtentry machinery both in ASM and C. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/irq: Convey vector as argument and not in ptregsThomas Gleixner5-3/+53
Device interrupts which go through do_IRQ() or the spurious interrupt handler have their separate entry code on 64 bit for no good reason. Both 32 and 64 bit transport the vector number through ORIG_[RE]AX in pt_regs. Further the vector number is forced to fit into an u8 and is complemented and offset by 0x80 so it's in the signed character range. Otherwise GAS would expand the pushq to a 5 byte instruction for any vector > 0x7F. Treat the vector number like an error code and hand it to the C function as argument. This allows to get rid of the extra entry code in a later step. Simplify the error code push magic by implementing the pushq imm8 via a '.byte 0x6a, vector' sequence so GAS is not able to screw it up. As the pushq imm8 is sign extending the resulting error code needs to be truncated to 8 bits in C code. Originally-by: Andy Lutomirski <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/irq: Use generic irq_regs implementationThomas Gleixner1-32/+0
The only difference is the name of the per-CPU variable: irq_regs vs. __irq_regs, but the accessor functions are identical. Remove the pointless copy and use the generic variant. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Remove the transition leftoversThomas Gleixner1-3/+3
Now that all exceptions are converted over the sane flag is not longer needed. Also the vector argument of idtentry_body on 64-bit is pointless now. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Switch page fault exception to IDTENTRY_RAWThomas Gleixner2-12/+2
Convert page fault exceptions to IDTENTRY_RAW: - Implement the C entry point with DEFINE_IDTENTRY_RAW - Add the CR2 read into the exception handler - Add the idtentry_enter/exit_cond_rcu() invocations in in the regular page fault handler and in the async PF part. - Emit the ASM stub with DECLARE_IDTENTRY_RAW - Remove the ASM idtentry in 64-bit - Remove the CR2 read from 64-bit - Remove the open coded ASM entry code in 32-bit - Fix up the XEN/PV code - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Switch XEN/PV hypercall entry to IDTENTRYThomas Gleixner1-0/+34
Convert the XEN/PV hypercall to IDTENTRY: - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64-bit - Remove the open coded ASM entry code in 32-bit - Remove the old prototypes The handler stubs need to stay in ASM code as they need corner case handling and adjustment of the stack pointer. Provide a new C function which invokes the entry/exit handling and calls into the XEN handler on the interrupt stack if required. The exit code is slightly different from the regular idtentry_exit() on non-preemptible kernels. If the hypercall is preemptible and need_resched() is set then XEN provides a preempt hypercall scheduling function. Move this functionality into the entry code so it can use the existing idtentry functionality. [ mingo: Build fixes. ] Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Acked-by: Juergen Gross <[email protected]> Tested-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Provide helpers for executing on the irqstackThomas Gleixner1-0/+53
Device interrupt handlers and system vector handlers are executed on the interrupt stack. The stack switch happens in the low level assembly entry code. This conflicts with the efforts to consolidate the exit code in C to ensure correctness vs. RCU and tracing. As there is no way to move #DB away from IST due to the MOV SS issue, the requirements vs. #DB and NMI for switching to the interrupt stack do not exist anymore. The only requirement is that interrupts are disabled. That allows the moving of the stack switching to C code, which simplifies the entry/exit handling further, because it allows the switching of stacks after handling the entry and on exit before handling RCU, returning to usermode and kernel preemption in the same way as for regular exceptions. The initial attempt of having the stack switching in inline ASM caused too much headache vs. objtool and the unwinder. After analysing the use cases it was agreed on that having the stack switch in ASM for the price of an indirect call is acceptable, as the main users are indirect call heavy anyway and the few system vectors which are empty shells (scheduler IPI and KVM posted interrupt vectors) can run from the regular stack. Provide helper functions to check whether the interrupt stack is already active and whether stack switching is required. 64-bit only for now, as 32-bit has a variant of that already. Once this is cleaned up, the two implementations might be consolidated as an additional cleanup on top. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Clean up idtentry_enter/exit() leftoversThomas Gleixner1-11/+1
Now that everything is converted to conditional RCU handling remove idtentry_enter/exit() and tidy up the conditional functions. This does not remove rcu_irq_exit_preempt(), to avoid conflicts with the RCU tree. Will be removed once all of this hits Linus's tree. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/idtentry: Switch to conditional RCU handlingThomas Gleixner1-4/+6
Switch all idtentry_enter/exit() users over to the new conditional RCU handling scheme and make the user mode entries in #DB, #INT3 and #MCE use the user mode idtentry functions. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Provide idtentry_enter/exit_user()Thomas Gleixner1-0/+3
As there are exceptions which already handle entry from user mode and from kernel mode separately, providing explicit user entry/exit handling callbacks makes sense and makes the code easier to understand. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Provide idtentry_entry/exit_cond_rcu()Thomas Gleixner1-2/+12
After a lengthy discussion [1] it turned out that RCU does not need a full rcu_irq_enter/exit() when RCU is already watching. All it needs if NOHZ_FULL is active is to check whether the tick needs to be restarted. This allows to avoid a separate variant for the pagefault handler which cannot invoke rcu_irq_enter() on a kernel pagefault which might sleep. The cond_rcu argument is only temporary and will be removed once the existing users of idtentry_enter/exit() have been cleaned up. After that the code can be significantly simplified. [ mingo: Simplified the control flow ] Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: "Paul E. McKenney" <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: [1] https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert double fault exception to IDTENTRY_DFThomas Gleixner2-5/+3
Convert #DF to IDTENTRY_DF - Implement the C entry point with DEFINE_IDTENTRY_DF - Emit the ASM stub with DECLARE_IDTENTRY_DF on 64bit - Remove the ASM idtentry in 64bit - Adjust the 32bit shim code - Fixup the XEN/PV code - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/idtentry: Provide IDTENTRY_DFThomas Gleixner1-0/+87
Provide a separate macro for #DF as this needs to emit paranoid only code and has also a special ASM stub in 32bit. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/idtentry: Provide IDTRENTRY_NOIST variants for #DB and #MCThomas Gleixner1-2/+17
Provide NOIST entry point macros which allows to implement NOIST variants of the C entry points. These are invoked when #DB or #MC enter from user space. This allows explicit handling of the difference between user mode and kernel mode entry later. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert Debug exception to IDTENTRY_DBThomas Gleixner2-3/+4
Convert #DB to IDTENTRY_ERRORCODE: - Implement the C entry point with DEFINE_IDTENTRY_DB - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/nmi: Protect NMI entry against instrumentationThomas Gleixner1-4/+4
Mark all functions in the fragile code parts noinstr or force inlining so they can't be instrumented. Also make the hardware latency tracer invocation explicit outside of non-instrumentable section. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert NMI to IDTENTRY_NMIThomas Gleixner2-3/+4
Convert #NMI to IDTENTRY_NMI: - Implement the C entry point with DEFINE_IDTENTRY_NMI - Fixup the XEN/PV code - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/idtentry: Provide IDTENTRY_XEN for XEN/PVThomas Gleixner1-0/+16
XEN/PV has special wrappers for NMI and DB exceptions. They redirect these exceptions through regular IDTENTRY points. Provide the necessary IDTENTRY macros to make this work Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert Machine Check to IDTENTRY_ISTThomas Gleixner3-8/+5
Convert #MC to IDTENTRY_MCE: - Implement the C entry points with DEFINE_IDTENTRY_MCE - Emit the ASM stub with DECLARE_IDTENTRY_MCE - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes - Remove the error code from *machine_check_vector() as it is always 0 and not used by any of the functions it can point to. Fixup all the functions as well. No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/idtentry: Provide IDTENTRY_ISTThomas Gleixner1-0/+54
Same as IDTENTRY but for exceptions which run on Interrupt Stacks (IST) on 64bit. For 32bit this maps to IDTENTRY. There are 3 variants which will be used: IDTENTRY_MCE IDTENTRY_DB IDTENTRY_NMI These map to IDTENTRY_IST, but only the MCE and DB variants are emitting ASM code as the NMI entry needs hand crafted ASM still. The function defines do not contain any idtenter/exit calls as these exceptions need special treatment. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert INT3 exception to IDTENTRY_RAWThomas Gleixner2-3/+3
Convert #BP to IDTENTRY_RAW: - Implement the C entry point with DEFINE_IDTENTRY_RAW - Invoke idtentry_enter/exit() from the function body - Emit the ASM stub with DECLARE_IDTENTRY_RAW - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes No functional change. This could be a plain IDTENTRY, but as Peter pointed out INT3 is broken vs. the static key in the context tracking code as this static key might be in the state of being patched and has an int3 which would recurse forever. IDTENTRY_RAW is therefore chosen to allow addressing this issue without lots of code churn. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/idtentry: Provide IDTENTRY_RAWThomas Gleixner1-0/+31
Some exception handlers need to do extra work before any of the entry helpers are invoked. Provide IDTENTRY_RAW for this. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/int3: Ensure that poke_int3_handler() is not tracedThomas Gleixner2-5/+8
In order to ensure poke_int3_handler() is completely self contained -- this is called while modifying other text, imagine the fun of hitting another INT3 -- ensure that everything it uses is not traced. The primary means here is to force inlining; bsearch() is notrace because all of lib/ is. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry/32: Convert IRET exception to IDTENTRY_SWThomas Gleixner2-3/+10
Convert the IRET exception handler to IDTENTRY_SW. This is slightly different than the conversions of hardware exceptions as the IRET exception is invoked via an exception table when IRET faults. So it just uses the IDTENTRY_SW mechanism for consistency. It does not emit ASM code as it does not fit the other idtentry exceptions. - Implement the C entry point with DEFINE_IDTENTRY_SW() which maps to DEFINE_IDTENTRY() - Fixup the XEN/PV code - Remove the old prototypes - Remove the RCU warning as the new entry macro ensures correctness No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert SIMD coprocessor error exception to IDTENTRYThomas Gleixner2-3/+1
Convert #XF to IDTENTRY_ERRORCODE: - Implement the C entry point with DEFINE_IDTENTRY - Emit the ASM stub with DECLARE_IDTENTRY - Handle INVD_BUG in C - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes - Remove the RCU warning as the new entry macro ensures correctness No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert Alignment check exception to IDTENTRYThomas Gleixner2-3/+1
Convert #AC to IDTENTRY_ERRORCODE: - Implement the C entry point with DEFINE_IDTENTRY - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes - Remove the RCU warning as the new entry macro ensures correctness No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert Coprocessor error exception to IDTENTRYThomas Gleixner2-3/+1
Convert #MF to IDTENTRY_ERRORCODE: - Implement the C entry point with DEFINE_IDTENTRY - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes - Remove the RCU warning as the new entry macro ensures correctness No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-06-11x86/entry: Convert Spurious interrupt bug exception to IDTENTRYThomas Gleixner2-3/+1
Convert #SPURIOUS to IDTENTRY_ERRORCODE: - Implement the C entry point with DEFINE_IDTENTRY - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64bit - Remove the open coded ASM entry code in 32bit - Fixup the XEN/PV code - Remove the old prototypes No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.