| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'arm/exynos', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
All instances of ->get() in arch/x86 switched; that might or might
not be worth splitting up. Notes:
* for xstateregs_get() the amount we want to store is determined at
the boot time; see init_xstate_size() and update_regset_xstate_info() for
details. task->thread.fpu.state.xsave ends with a flexible array member and
the amount of data in it depends upon the FPU features supported/enabled.
* fpregs_get() writes slightly less than full ->thread.fpu.state.fsave
(the last word is not copied); we pass the full size of state.fsave and let
membuf_write() trim to the amount declared by regset - __regset_get() will
make sure that the space in buffer is no more than that.
* copy_xstate_to_user() and its helpers are gone now.
* fpregs_soft_get() was getting user_regset_copyout() arguments
wrong. Since "x86: x86 user_regset math_emu" back in 2008... I really
doubt that it's worth splitting out for -stable, though - you need
a 486SX box for that to trigger...
[Kevin's braino fix for copy_xstate_to_kernel() essentially duplicated here]
Signed-off-by: Al Viro <[email protected]>
|
|
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <[email protected]>
|
|
Instead of having #ifdef/#endif blocks inside sync_core() for X86_64 and
X86_32, implement the new function iret_to_self() with two versions.
In this manner, avoid having to use even more more #ifdef/#endif blocks
when adding support for SERIALIZE in sync_core().
Co-developed-by: Tony Luck <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Ricardo Neri <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Having sync_core() in processor.h is problematic since it is not possible
to check for hardware capabilities via the *cpu_has() family of macros.
The latter needs the definitions in processor.h.
It also looks more intuitive to relocate the function to sync_core.h.
This changeset does not make changes in functionality.
Signed-off-by: Ricardo Neri <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The Intel architecture defines a set of Serializing Instructions (a
detailed definition can be found in Vol.3 Section 8.3 of the Intel "main"
manual, SDM). However, these instructions do more than what is required,
have side effects and/or may be rather invasive. Furthermore, some of
these instructions are only available in kernel mode or may cause VMExits.
Thus, software using these instructions only to serialize execution (as
defined in the manual) must handle the undesired side effects.
As indicated in the name, SERIALIZE is a new Intel architecture
Serializing Instruction. Crucially, it does not have any of the mentioned
side effects. Also, it does not cause VMExit and can be used in user mode.
This new instruction is currently documented in the latest "extensions"
manual (ISE). It will appear in the "main" manual in the future.
Signed-off-by: Ricardo Neri <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
|
|
The function is only called from within init_64.c and can be static.
Also remove it from pgtable_64.h.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove the code to sync the vmalloc and ioremap ranges for x86-64. The
page-table pages are all pre-allocated now so that synchronization is
no longer necessary.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Refresh the branch for a dependent commit.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Resolve conflicts with ongoing lockdep work that fixed the NMI entry code.
Conflicts:
arch/x86/entry/common.c
arch/x86/include/asm/idtentry.h
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Delete the repeated word "the".
[ mingo: While at it, also capitalize CPU properly. ]
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Delete the repeated word "you".
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
CPU family
Add three new Intel CPU models.
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
commits
Signed-off-by: Ingo Molnar <[email protected]>
|
|
AFAICS the last uses of directly 'making' kernel PGDs was removed 7 years ago:
8b78c21d72d9: ("x86, 64bit, mm: hibernate use generic mapping_init")
Where the explicit PGD walking loop was replaced with kernel_ident_mapping_init()
calls. This was then (unnecessarily) carried over through the 5-level paging conversion.
Also clean up the 'level' comments a bit, to convey the original, meanwhile somewhat
bit-rotten notion, that these are empty comment blocks with no methods to handle any
of the levels except the PTE level.
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Last use of them was removed 13 years ago, when the code was converted
to use CYC2NS_SCALE_FACTOR:
53d517cdbaac: ("x86: scale cyc_2_nsec according to CPU frequency")
The current TSC code uses the 'struct cyc2ns_data' scaling abstraction,
the old fixed scaling approach is long gone.
This cleanup also removes the 'arbitralrily' typo from the comment,
so win-win. ;-)
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Last use was removed more than 5 years ago, in:
5ad274d41c1b: ("x86/irq: Remove unused old IOAPIC irqdomain interfaces")
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove the temporary defines and fixup all references.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Replace the x86 code with the generic variant. Use temporary defines for
idtentry_* which will be cleaned up in the next step.
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Cleanup the temporary defines and use irqentry_ instead of idtentry_.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Replace the x86 variant with the generic version. Provide the relevant
architecture specific helper functions and defines.
Use a temporary define for idtentry_exit_user which will be cleaned up
seperately.
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Kees Cook <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Replace the syscall entry work handling with the generic version. Provide
the necessary helper inlines to handle the real architecture specific
parts, e.g. ptrace.
Use a temporary define for idtentry_enter_user which will be cleaned up
seperately.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
As a preparatory step for moving the syscall and interrupt entry/exit
handling into generic code, provide a pt_regs helper which retrieves the
interrupt state from pt_regs. This is required to check whether interrupts
are reenabled by return from interrupt/exception.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Pick up generic entry code to migrate x86 over.
|
|
<linux/instrumentation.h> header
Linus pointed out that compiler.h - which is a key header that gets included in every
single one of the 28,000+ kernel files during a kernel build - was bloated in:
655389666643: ("vmlinux.lds.h: Create section for protection against instrumentation")
Linus noted:
> I have pulled this, but do we really want to add this to a header file
> that is _so_ core that it gets included for basically every single
> file built?
>
> I don't even see those instrumentation_begin/end() things used
> anywhere right now.
>
> It seems excessive. That 53 lines is maybe not a lot, but it pushed
> that header file to over 12kB, and while it's mostly comments, it's
> extra IO and parsing basically for _every_ single file compiled in the
> kernel.
>
> For what appears to be absolutely zero upside right now, and I really
> don't see why this should be in such a core header file!
Move these primitives into a new header: <linux/instrumentation.h>, and include that
header in the headers that make use of it.
Unfortunately one of these headers is asm-generic/bug.h, which does get included
in a lot of places, similarly to compiler.h. So the de-bloating effect isn't as
good as we'd like it to be - but at least the interfaces are defined separately.
No change to functionality intended.
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Thomas Gleixner <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
|
|
The macro is not used anywhere, and has an incorrect value (going by the
comment) on x86_64 since commit c898faf91b3e ("x86: 46 bit physical address
support on 64 bits")
To avoid confusion, just remove the definition.
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Clang fails to compile __get_user_size() on 32-bit for the following code:
long long val;
__get_user(val, usrptr);
with: error: invalid output size for constraint '=q'
GCC compiles the same code without complaints.
The reason is that GCC and Clang are architecturally different, which leads
to subtle issues for code that's invalid but clearly dead, i.e. with code
that emulates polymorphism with the preprocessor and sizeof.
GCC will perform semantic analysis after early inlining and dead code
elimination, so it will not warn on invalid code that's dead. Clang
strictly performs optimizations after semantic analysis, so it will warn
for dead code.
Neither Clang nor GCC like this very much with -m32:
long long ret;
asm ("movb $5, %0" : "=q" (ret));
However, GCC can tolerate this variant:
long long ret;
switch (sizeof(ret)) {
case 1:
asm ("movb $5, %0" : "=q" (ret));
break;
case 8:;
}
Clang, on the other hand, won't accept that because it validates the inline
asm for the '1' case before the optimisation phase where it realises that
it wouldn't have to emit it anyway.
If LLVM (Clang's "back end") fails such as during instruction selection or
register allocation, it cannot provide accurate diagnostics (warnings /
errors) that contain line information, as the AST has been discarded from
memory at that point.
While there have been early discussions about having C/C++ specific
language optimizations in Clang via the use of MLIR, which would enable
such earlier optimizations, such work is not scoped and likely a multi-year
endeavor.
It was discussed to change the asm output constraint for the one byte case
from "=q" to "=r". While it works for 64-bit, it fails on 32-bit. With '=r'
the compiler could fail to chose a register accessible as high/low which is
required for the byte operation. If that happens the assembly will fail.
Use a local temporary variable of type 'unsigned char' as output for the
byte copy inline asm and then assign it to the real output variable. This
prevents Clang from failing the semantic analysis in the above case.
The resulting code for the actual one byte copy is not affected as the
temporary variable is optimized out.
[ tglx: Amended changelog ]
Reported-by: Arnd Bergmann <[email protected]>
Reported-by: David Woodhouse <[email protected]>
Reported-by: Dmitry Golovin <[email protected]>
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/3
Link: https://github.com/ClangBuiltLinux/linux/issues/194
Link: https://github.com/ClangBuiltLinux/linux/issues/781
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/lkml/CAK8P3a1EBaWdbAEzirFDSgHVJMtWjuNt2HGG8z+vpXeNHwETFQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/[email protected]
|
|
Also remove now unused __percpu_mov_op.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Use __pcpu_size_call_return() to simplify this_cpu_read_stable().
Also remove __bad_percpu_size() which is now unused.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The "e" constraint represents a constant, but the XADD instruction doesn't
accept immediate operands.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
In preparation for cleaning up the percpu operations, define macros for
abstraction based on the width of the operation.
Signed-off-by: Brian Gerst <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Resolves conflict with the tip tree.
Fixes: d7866e503bdc ("crypto: x86 - Remove include/asm/inst.h")
CC: Thomas Gleixner <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: Borislav Petkov <[email protected]>
CC: "H. Peter Anvin" <[email protected]>
CC: Stephen Rothwell <[email protected]>,
CC: "Chang S. Bae" <[email protected]>,
CC: Peter Zijlstra <[email protected]>,
CC: Sasha Levin <[email protected]>
Signed-off-by: Uros Bizjak <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
show_trace_log_lvl() provides x86 platform-specific way to unwind
backtrace with a given log level. Unfortunately, registers dump(s) are
not printed with the same log level - instead, KERN_DEFAULT is always
used.
Arista's switches uses quite common setup with rsyslog, where only
urgent messages goes to console (console_log_level=KERN_ERR), everything
else goes into /var/log/ as the console baud-rate often is indecently
slow (9600 bps).
Backtrace dumps without registers printed have proven to be as useful as
morning standups. Furthermore, in order to introduce KERN_UNSUPPRESSED
(which I believe is still the most elegant way to fix raciness of sysrq[1])
the log level should be passed down the stack to register dumping
functions. Besides, there is a potential use-case for printing traces
with KERN_DEBUG level [2] (where registers dump shouldn't appear with
higher log level).
Add log_lvl parameter to __show_regs().
Keep the used log level intact to separate visible change.
[1]: https://lore.kernel.org/lkml/[email protected]/
[2]: https://lore.kernel.org/linux-doc/[email protected]/
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Petr Mladek <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
show_trace_log_lvl() provides x86 platform-specific way to unwind
backtrace with a given log level. Unfortunately, registers dump(s) are
not printed with the same log level - instead, KERN_DEFAULT is always
used.
Arista's switches uses quite common setup with rsyslog, where only
urgent messages goes to console (console_log_level=KERN_ERR), everything
else goes into /var/log/ as the console baud-rate often is indecently
slow (9600 bps).
Backtrace dumps without registers printed have proven to be as useful as
morning standups. Furthermore, in order to introduce KERN_UNSUPPRESSED
(which I believe is still the most elegant way to fix raciness of sysrq[1])
the log level should be passed down the stack to register dumping
functions. Besides, there is a potential use-case for printing traces
with KERN_DEBUG level [2] (where registers dump shouldn't appear with
higher log level).
Add log_lvl parameter to show_iret_regs() as a preparation to add it
to __show_regs() and show_regs_if_on_stack().
[1]: https://lore.kernel.org/lkml/[email protected]/
[2]: https://lore.kernel.org/linux-doc/[email protected]/
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Petr Mladek <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
|
|
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439dd ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
|
|
IOSF MBI header contains a lot of definitions, such as
end point addresses of IPs. Move CCK address from AtomISP driver
to generic header.
While here, drop unused one.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
With UV1 support removed, EFI_UV1_MEMMAP is no longer used.
Signed-off-by: Steve Wahl <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|