| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A landry list of fixes:
- fix reboot breakage on some PCID-enabled system
- fix crashes/hangs on some PCID-enabled systems
- fix microcode loading on certain older CPUs
- various unwinder fixes
- extend an APIC quirk to more hardware systems and disable APIC
related warning on virtualized systems
- various Hyper-V fixes
- a macro definition robustness fix
- remove jprobes IRQ disabling
- various mem-encryption fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Do the family check first
x86/mm: Flush more aggressively in lazy TLB mode
x86/apic: Update TSC_DEADLINE quirk with additional SKX stepping
x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on hypervisors
x86/mm: Disable various instrumentations of mm/mem_encrypt.c and mm/tlb.c
x86/hyperv: Fix hypercalls with extended CPU ranges for TLB flushing
x86/hyperv: Don't use percpu areas for pcpu_flush/pcpu_flush_ex structures
x86/hyperv: Clear vCPU banks between calls to avoid flushing unneeded vCPUs
x86/unwind: Disable unwinder warnings on 32-bit
x86/unwind: Align stack pointer in unwinder dump
x86/unwind: Use MSB for frame pointer encoding on 32-bit
x86/unwind: Fix dereference of untrusted pointer
x86/alternatives: Fix alt_max_short macro to really be a max()
x86/mm/64: Fix reboot interaction with CR4.PCIDE
kprobes/x86: Remove IRQ disabling from jprobe handlers
kprobes/x86: Set up frame pointer in kprobe trampoline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Ingo Molnar:
"A boot parameter fix, plus a header export fix"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Hide mca_cfg
RAS/CEC: Use the right length for "cec_disable"
|
|
Since commit:
94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")
x86's lazy TLB mode has been all the way lazy: when running a kernel thread
(including the idle thread), the kernel keeps using the last user mm's
page tables without attempting to maintain user TLB coherence at all.
From a pure semantic perspective, this is fine -- kernel threads won't
attempt to access user pages, so having stale TLB entries doesn't matter.
Unfortunately, I forgot about a subtlety. By skipping TLB flushes,
we also allow any paging-structure caches that may exist on the CPU
to become incoherent. This means that we can have a
paging-structure cache entry that references a freed page table, and
the CPU is within its rights to do a speculative page walk starting
at the freed page table.
I can imagine this causing two different problems:
- A speculative page walk starting from a bogus page table could read
IO addresses. I haven't seen any reports of this causing problems.
- A speculative page walk that involves a bogus page table can install
garbage in the TLB. Such garbage would always be at a user VA, but
some AMD CPUs have logic that triggers a machine check when it notices
these bogus entries. I've seen a couple reports of this.
Boris further explains the failure mode:
> It is actually more of an optimization which assumes that paging-structure
> entries are in WB DRAM:
>
> "TlbCacheDis: cacheable memory disable. Read-write. 0=Enables
> performance optimization that assumes PML4, PDP, PDE, and PTE entries
> are in cacheable WB-DRAM; memory type checks may be bypassed, and
> addresses outside of WB-DRAM may result in undefined behavior or NB
> protocol errors. 1=Disables performance optimization and allows PML4,
> PDP, PDE and PTE entries to be in any memory type. Operating systems
> that maintain page tables in memory types other than WB- DRAM must set
> TlbCacheDis to insure proper operation."
>
> The MCE generated is an NB protocol error to signal that
>
> "Link: A specific coherent-only packet from a CPU was issued to an
> IO link. This may be caused by software which addresses page table
> structures in a memory type other than cacheable WB-DRAM without
> properly configuring MSRC001_0015[TlbCacheDis]. This may occur, for
> example, when page table structure addresses are above top of memory. In
> such cases, the NB will generate an MCE if it sees a mismatch between
> the memory operation generated by the core and the link type."
>
> I'm assuming coherent-only packets don't go out on IO links, thus the
> error.
To fix this, reinstate TLB coherence in lazy mode. With this patch
applied, we do it in one of two ways:
- If we have PCID, we simply switch back to init_mm's page tables
when we enter a kernel thread -- this seems to be quite cheap
except for the cost of serializing the CPU.
- If we don't have PCID, then we set a flag and switch to init_mm
the first time we would otherwise need to flush the TLB.
The /sys/kernel/debug/x86/tlb_use_lazy_mode debug switch can be changed
to override the default mode for benchmarking.
In theory, we could optimize this better by only flushing the TLB in
lazy CPUs when a page table is freed. Doing that would require
auditing the mm code to make sure that all page table freeing goes
through tlb_remove_page() as well as reworking some data structures
to implement the improved flush logic.
Reported-by: Markus Trippelsdorf <[email protected]>
Reported-by: Adam Borowski <[email protected]>
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Johannes Hirte <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Roman Kagan <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
hv_flush_pcpu_ex structures are not cleared between calls for performance
reasons (they're variable size up to PAGE_SIZE each) but we must clear
hv_vp_set.bank_contents part of it to avoid flushing unneeded vCPUs. The
rest of the structure is formed correctly.
To do the clearing in an efficient way stash the maximum possible vCPU
number (this may differ from Linux CPU id).
Reported-by: Jork Loeser <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Cc: Dexuan Cui <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: K. Y. Srinivasan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The alt_max_short() macro in asm/alternative.h does not work as
intended, leading to nasty bugs. E.g. alt_max_short("1", "3")
evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not
exactly the maximum of 1 and 3.
In fact, I had to learn it the hard way by crashing my kernel in not
so funny ways by attempting to make use of the ALTENATIVE_2 macro
with alternatives where the first one was larger than the second
one.
According to [1] and commit dbe4058a6a44 ("x86/alternatives: Fix
ALTERNATIVE_2 padding generation properly") the right handed side
should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the
macro work as intended.
While at it, fix up the comments regarding the additional "-", too.
It's not about gas' usage of s32 but brain dead logic of having a
"true" value of -1 for the < operator ... *sigh*
Btw., the one in asm/alternative-asm.h is correct. And, apparently,
all current users of ALTERNATIVE_2() pass same sized alternatives,
avoiding to hit the bug.
[1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
Reviewed-and-tested-by: Borislav Petkov <[email protected]>
Fixes: dbe4058a6a44 ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly")
Signed-off-by: Mathias Krause <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
Now that lguest is gone, put it in the internal header which should be
used only by MCA/RAS code.
Add missing header guards while at it.
No functional change.
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Currently, in PREEMPT_COUNT=n kernel, kvm_async_pf_task_wait() could call
schedule() to reschedule in some cases. This could result in
accidentally ending the current RCU read-side critical section early,
causing random memory corruption in the guest, or otherwise preempting
the currently running task inside between preempt_disable and
preempt_enable.
The difficulty to handle this well is because we don't know whether an
async PF delivered in a preemptible section or RCU read-side critical section
for PREEMPT_COUNT=n, since preempt_disable()/enable() and rcu_read_lock/unlock()
are both no-ops in that case.
To cure this, we treat any async PF interrupting a kernel context as one
that cannot be preempted, preventing kvm_async_pf_task_wait() from choosing
the schedule() path in that case.
To do so, a second parameter for kvm_async_pf_task_wait() is introduced,
so that we know whether it's called from a context interrupting the
kernel, and the parameter is set properly in all the callsites.
Cc: "Paul E. McKenney" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: [email protected]
Signed-off-by: Boqun Feng <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This contains the following fixes and improvements:
- Avoid dereferencing an unprotected VMA pointer in the fault signal
generation code
- Fix inline asm call constraints for GCC 4.4
- Use existing register variable to retrieve the stack pointer
instead of forcing the compiler to create another indirect access
which results in excessive extra 'mov %rsp, %<dst>' instructions
- Disable branch profiling for the memory encryption code to prevent
an early boot crash
- Fix a sparse warning caused by casting the __user annotation in
__get_user_asm_u64() away
- Fix an off by one error in the loop termination of the error patch
in the x86 sysfs init code
- Add missing CPU IDs to various Intel specific drivers to enable the
functionality on recent hardware
- More (init) constification in the numachip code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Use register variable to get stack pointer value
x86/mm: Disable branch profiling in mem_encrypt.c
x86/asm: Fix inline asm call constraints for GCC 4.4
perf/x86/intel/uncore: Correct num_boxes for IIO and IRP
perf/x86/intel/rapl: Add missing CPU IDs
perf/x86/msr: Add missing CPU IDs
perf/x86/intel/cstate: Add missing CPU IDs
x86: Don't cast away the __user in __get_user_asm_u64()
x86/sysfs: Fix off-by-one error in loop termination
x86/mm: Fix fault error path using unsafe vma pointer
x86/numachip: Add const and __initconst to numachip2_clockevent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- avoid a warning when compiling with clang
- consider read-only bits in xen-pciback when writing to a BAR
- fix a boot crash of pv-domains
* tag 'for-linus-4.14c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/mmu: Call xen_cleanhighmap() with 4MB aligned for page tables mapping
xen-pciback: relax BAR sizing write value check
x86/xen: clean up clang build warning
|
|
Currently we use current_stack_pointer() function to get the value
of the stack pointer register. Since commit:
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
... we have a stack register variable declared. It can be used instead of
current_stack_pointer() function which allows to optimize away some
excessive "mov %rsp, %<dst>" instructions:
-mov %rsp,%rdx
-sub %rdx,%rax
-cmp $0x3fff,%rax
-ja ffffffff810722fd <ist_begin_non_atomic+0x2d>
+sub %rsp,%rax
+cmp $0x3fff,%rax
+ja ffffffff810722fa <ist_begin_non_atomic+0x2a>
Remove current_stack_pointer(), rename __asm_call_sp to current_stack_pointer
and use it instead of the removed function.
Signed-off-by: Andrey Ryabinin <[email protected]>
Reviewed-by: Josh Poimboeuf <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The kernel test bot (run by Xiaolong Ye) reported that the following commit:
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
is causing double faults in a kernel compiled with GCC 4.4.
Linus subsequently diagnosed the crash pattern and the buggy commit and found that
the issue is with this code:
register unsigned int __asm_call_sp asm("esp");
#define ASM_CALL_CONSTRAINT "+r" (__asm_call_sp)
Even on a 64-bit kernel, it's using ESP instead of RSP. That causes GCC
to produce the following bogus code:
ffffffff8147461d: 89 e0 mov %esp,%eax
ffffffff8147461f: 4c 89 f7 mov %r14,%rdi
ffffffff81474622: 4c 89 fe mov %r15,%rsi
ffffffff81474625: ba 20 00 00 00 mov $0x20,%edx
ffffffff8147462a: 89 c4 mov %eax,%esp
ffffffff8147462c: e8 bf 52 05 00 callq ffffffff814c98f0 <copy_user_generic_unrolled>
Despite the absurdity of it backing up and restoring the stack pointer
for no reason, the bug is actually the fact that it's only backing up
and restoring the lower 32 bits of the stack pointer. The upper 32 bits
are getting cleared out, corrupting the stack pointer.
So change the '__asm_call_sp' register variable to be associated with
the actual full-size stack pointer.
This also requires changing the __ASM_SEL() macro to be based on the
actual compiled arch size, rather than the CONFIG value, because
CONFIG_X86_64 compiles some files with '-m32' (e.g., realmode and vdso).
Otherwise Clang fails to build the kernel because it complains about the
use of a 64-bit register (RSP) in a 32-bit file.
Reported-and-Bisected-and-Tested-by: kernel test robot <[email protected]>
Diagnosed-by: Linus Torvalds <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: LKP <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matthias Kaehlcke <[email protected]>
Cc: Miguel Bernal Marin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
Link: http://lkml.kernel.org/r/20170928215826.6sdpmwtkiydiytim@treble
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Move validation of user-supplied xstate_header into a helper function,
in preparation of calling it from both the ptrace and sigreturn syscall
paths.
The new function also considers it to be an error if *any* reserved bits
are set, whereas before we were just clearing most of them silently.
This should reduce the chance of bugs that fail to correctly validate
user-supplied XSAVE areas. It also will expose any broken userspace
programs that set the other reserved bits; this is desirable because
such programs will lose compatibility with future CPUs and kernels if
those bits are ever used for anything. (There shouldn't be any such
programs, and in fact in the case where the compacted format is in use
we were already validating xfeatures. But you never know...)
Signed-off-by: Eric Biggers <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kevin Hao <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michael Halcrow <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
fpu__prepare_[read|write]()
As per the new nomenclature we don't 'activate' the FPU state
anymore, we initialize it. So drop the _activate_fpstate name
from these functions, which were a bit of a mouthful anyway,
and name them:
fpu__prepare_read()
fpu__prepare_write()
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Rename this function to better express that it's all about
initializing the FPU state of a task which goes hand in hand
with the fpu::initialized field.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The x86 FPU code used to have a complex state machine where both the FPU
registers and the FPU state context could be 'active' (or inactive)
independently of each other - which enabled features like lazy FPU restore.
Much of this complexity is gone in the current code: now we basically can
have FPU-less tasks (kernel threads) that don't use (and save/restore) FPU
state at all, plus full FPU users that save/restore directly with no laziness
whatsoever.
But the fpu::fpstate_active still carries bits of the old complexity - meanwhile
this flag has become a simple flag that shows whether the FPU context saving
area in the thread struct is initialized and used, or not.
Rename it to fpu::initialized to express this simplicity in the name as well.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
These functions are not used anymore, so remove them.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Don't cast away the __user in __get_user_asm_u64() on x86-32.
Prevents sparse getting upset.
Signed-off-by: Ville Syrjälä <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Linus Torvalds <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Userspace can change the FPU state of a task using the ptrace() or
rt_sigreturn() system calls. Because reserved bits in the FPU state can
cause the XRSTOR instruction to fail, the kernel has to carefully
validate that no reserved bits or other invalid values are being set.
Unfortunately, there have been bugs in this validation code. For
example, we were not checking that the 'xcomp_bv' field in the
xstate_header was 0. As-is, such bugs are exploitable to read the FPU
registers of other processes on the system. To do so, an attacker can
create a task, assign to it an invalid FPU state, then spin in a loop
and monitor the values of the FPU registers. Because the task's FPU
registers are not being restored, sometimes the FPU registers will have
the values from another process.
This is likely to continue to be a problem in the future because the
validation done by the CPU instructions like XRSTOR is not immediately
visible to kernel developers. Nor will invalid FPU states ever be
encountered during ordinary use --- they will only be seen during
fuzzing or exploits. There can even be reserved bits outside the
xstate_header which are easy to forget about. For example, the MXCSR
register contains reserved bits, which were not validated by the
KVM_SET_XSAVE ioctl until commit a575813bfe4b ("KVM: x86: Fix load
damaged SSEx MXCSR register").
Therefore, mitigate this class of vulnerability by restoring the FPU
registers from init_fpstate if restoring from the task's state fails.
We actually used to do this, but it was (perhaps unwisely) removed by
commit 9ccc27a5d297 ("x86/fpu: Remove error return values from
copy_kernel_to_*regs() functions"). This new patch is also a bit
different. First, it only clears the registers, not also the bad
in-memory state; this is simpler and makes it easier to make the
mitigation cover all callers of __copy_kernel_to_fpregs(). Second, it
does the register clearing in an exception handler so that no extra
instructions are added to context switches. In fact, we *remove*
instructions, since previously we were always zeroing the register
containing 'err' even if CONFIG_X86_DEBUG_FPU was disabled.
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Kevin Hao <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michael Halcrow <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
copy_xregs_to_kernel checks if the alternatives have been already
patched.
This WARN_ON() is always executed in every context switch.
All the other checks in fpu internal.h are WARN_ON_FPU(), but
this one is plain WARN_ON(). I assume it was forgotten to switch it.
So switch it to WARN_ON_FPU() too to avoid some unnecessary code
in the context switch, and a potentially expensive cache line miss for the
global variable.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Skylake CPUs
On Skylake CPUs I noticed that XRSTOR is unable to deal with states
created by copyout_from_xsaves() if the xstate has only SSE/YMM state, and
no FP state. That is, xfeatures had XFEATURE_MASK_SSE set, but not
XFEATURE_MASK_FP.
The reason is that part of the SSE/YMM state lives in the MXCSR and
MXCSR_FLAGS fields of the FP state.
Ensure that whenever we copy SSE or YMM state around, the MXCSR and
MXCSR_FLAGS fields are also copied around.
Signed-off-by: Rik van Riel <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The previous changes paved the way for the removal of the
fpu::fpregs_active state flag - we now only have the
fpu::fpstate_active and fpu::last_cpu fields left.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The fpregs_activate()/fpregs_deactivate() are currently called in such a pattern:
if (!fpu->fpregs_active)
fpregs_activate(fpu);
...
if (fpu->fpregs_active)
fpregs_deactivate(fpu);
But note that it's actually safe to call them without checking the flag first.
This further decouples the fpu->fpregs_active flag from actual FPU logic.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
We want to simplify the FPU state machine by eliminating fpu->fpregs_active,
and we can do that because the two state flags (::fpregs_active and
::fpstate_active) are set essentially together.
The old lazy FPU switching code used to make a distinction - but there's
no lazy switching code anymore, we always switch in an 'eager' fashion.
Do this by first changing all substantial uses of fpu->fpregs_active
to fpu->fpstate_active and adding a few debug checks to double check
our assumption is correct.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The fpregs_active() inline function is pretty pointless - in almost
all the callsites it can be replaced with a direct fpu->fpregs_active
access.
Do so and eliminate the extra layer of obfuscation.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Make it more consistent with regular memcpy() semantics, where the destination
argument comes first.
No change in functionality.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
No change in functionality.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
No change in functionality.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
copy_user_to_xstate()
Similar to:
x86/fpu: Split copy_xstate_to_user() into copy_xstate_to_kernel() & copy_xstate_to_user()
No change in functionality.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Right now there's a confusing mixture of 'offset' and 'size' parameters:
- __copy_xstate_to_*() input parameter 'end_pos' not not really an offset,
but the full size of the copy to be performed.
- input parameter 'count' to copy_xstate_to_*() shadows that of
__copy_xstate_to_*()'s 'count' parameter name - but the roles
are different: the first one is the total number of bytes to
be copied, while the second one is a partial copy size.
To unconfuse all this, use a consistent set of parameter names:
- 'size' is the partial copy size within a single xstate component
- 'size_total' is the total copy requested
- 'offset_start' is the requested starting offset.
- 'offset' is the offset within an xstate component.
No change in functionality.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Parameter ordering is weird:
int copy_xstate_to_kernel(unsigned int pos, unsigned int count, void *kbuf, struct xregs_state *xsave);
int copy_xstate_to_user(unsigned int pos, unsigned int count, void __user *ubuf, struct xregs_state *xsave);
'pos' and 'count', which are attributes of the destination buffer, are listed before the destination
buffer itself ...
List them after the primary arguments instead.
This makes the code more similar to regular memcpy() variant APIs.
No change in functionality.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The 'kbuf' parameter is unused in the _user() side of the API, remove it.
This simplifies the code and makes it easier to think about.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The 'ubuf' parameter is unused in the _kernel() side of the API, remove it.
This simplifies the code and makes it easier to think about.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
copy_xstate_to_user()
copy_xstate_to_user() is a weird API - in part due to a bad API inherited
from the regset APIs.
But don't propagate that bad API choice into the FPU code - so as a first
step split the API into kernel and user buffer handling routines.
(Also split the xstate_copyout() internal helper.)
The split API is a dumb duplication that should be obviously correct, the
real splitting will be done in the next patch.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
copy_user_to_xstate()/copy_xstate_to_user()
The 'copyin/copyout' nomenclature needlessly departs from what the modern FPU code
uses, which is:
copy_fpregs_to_fpstate()
copy_fpstate_to_sigframe()
copy_fregs_to_user()
copy_fxregs_to_kernel()
copy_fxregs_to_user()
copy_kernel_to_fpregs()
copy_kernel_to_fregs()
copy_kernel_to_fxregs()
copy_kernel_to_xregs()
copy_user_to_fregs()
copy_user_to_fxregs()
copy_user_to_xregs()
copy_xregs_to_kernel()
copy_xregs_to_user()
I.e. according to this pattern, the following rename should be done:
copyin_to_xsaves() -> copy_user_to_xstate()
copyout_from_xsaves() -> copy_xstate_to_user()
or, if we want to be pedantic, denote that that the user-space format is ptrace:
copyin_to_xsaves() -> copy_user_ptrace_to_xstate()
copyout_from_xsaves() -> copy_xstate_to_user_ptrace()
But I'd suggest the shorter, non-pedantic name.
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:
static inline void foo()
{
register void *__sp asm(_ASM_SP);
asm("call bar" : "+r" (__sp))
}
Unfortunately, that pattern causes Clang to corrupt the stack pointer.
The fix is easy: convert the stack pointer register variable to a global
variable.
It should be noted that the end result is different based on the GCC
version. With GCC 6.4, this patch has exactly the same result as
before:
defconfig defconfig-nofp distro distro-nofp
before 9820389 9491555 8816046 8516940
after 9820389 9491555 8816046 8516940
With GCC 7.2, however, GCC's behavior has changed. It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm. (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.) It's a bit
overkill, but the performance impact should be negligible. And in fact,
there's a nice improvement with frame pointers disabled:
defconfig defconfig-nofp distro distro-nofp
before 9796316 9468236 9076191 8790305
after 9796957 9464267 9076381 8785949
So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
Suggested-by: Andrey Ryabinin <[email protected]>
Reported-by: Matthias Kaehlcke <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Miguel Bernal Marin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
In the case where sizeof(maddr) != sizeof(long) p is initialized and
never read and clang throws a warning on this. Move declaration of
p to clean up the clang build warning:
warning: Value stored to 'p' during its initialization is never read
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
Putting the logical ASID into CR3's PCID bits directly means that we
have two cases to consider separately: ASID == 0 and ASID != 0.
This means that bugs that only hit in one of these cases trigger
nondeterministically.
There were some bugs like this in the past, and I think there's
still one in current kernels. In particular, we have a number of
ASID-unware code paths that save CR3, write some special value, and
then restore CR3. This includes suspend/resume, hibernate, kexec,
EFI, and maybe other things I've missed. This is currently
dangerous: if ASID != 0, then this code sequence will leave garbage
in the TLB tagged for ASID 0. We could potentially see corruption
when switching back to ASID 0. In principle, an
initialize_tlbstate_and_flush() call after these sequences would
solve the problem, but EFI, at least, does not call this. (And it
probably shouldn't -- initialize_tlbstate_and_flush() is rather
expensive.)
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/cdc14bbe5d3c3ef2a562be09a6368ffe9bd947a6.1505663533.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Current, the code that assembles a value to load into CR3 is
open-coded everywhere. Factor it out into helpers build_cr3() and
build_cr3_noflush().
This makes one semantic change: __get_current_cr3_fast() was wrong
on SME systems. No one noticed because the only caller is in the
VMX code, and there are no CPUs with both SME and VMX.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tom Lendacky <[email protected]>
Link: http://lkml.kernel.org/r/ce350cf11e93e2842d14d0b95b0199c7d881f527.1505663533.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Pull more KVM updates from Paolo Bonzini:
- PPC bugfixes
- RCU splat fix
- swait races fix
- pointless userspace-triggerable BUG() fix
- misc fixes for KVM_RUN corner cases
- nested virt correctness fixes + one host DoS
- some cleanups
- clang build fix
- fix AMD AVIC with default QEMU command line options
- x86 bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly
kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly
kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry
kvm,mips: Fix potential swait_active() races
kvm,powerpc: Serialize wq active checks in ops->vcpu_kick
kvm: Serialize wq active checks in kvm_vcpu_wake_up()
kvm,x86: Fix apf_task_wake_one() wq serialization
kvm,lapic: Justify use of swait_active()
kvm,async_pf: Use swq_has_sleeper()
sched/wait: Add swq_has_sleeper()
KVM: VMX: Do not BUG() on out-of-bounds guest IRQ
KVM: Don't accept obviously wrong gsi values via KVM_IRQFD
kvm: nVMX: Don't allow L2 to access the hardware CR8
KVM: trace events: update list of exit reasons
KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously
KVM: X86: Don't block vCPU if there is pending exception
KVM: SVM: Add irqchip_split() checks before enabling AVIC
KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv()
KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()
KVM: x86: fix clang build
...
|
|
Modify struct kvm_x86_ops.arch.apicv_active() to take struct kvm_vcpu
pointer as parameter in preparation to subsequent changes.
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
|
|
The commit
9dd21e104bc ('KVM: x86: simplify handling of PKRU')
removed all users and providers of that call-back, but
didn't remove it. Remove it now.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
|
|
With removal of lguest some of the paravirt functions are no longer
needed:
->read_cr4()
->store_idt()
->set_pmd_at()
->set_pud_at()
->pte_update()
Remove them.
Signed-off-by: Juergen Gross <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes: dead code removal, plus a SME memory encryption fix on
32-bit kernels that crashed Xen guests"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove unused and undefined __generic_processor_info() declaration
x86/mm: Make the SME mask a u64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm from Dan Williams:
"A rework of media error handling in the BTT driver and other updates.
It has appeared in a few -next releases and collected some late-
breaking build-error and warning fixups as a result.
Summary:
- Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
- The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
- A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
- Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes"
* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
libnvdimm, btt: fix format string warnings
libnvdimm, btt: clean up warning and error messages
ext4: fix null pointer dereference on sbi
libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
dax: fix FS_DAX=n BLOCK=y compilation
libnvdimm: fix integer overflow static analysis warning
libnvdimm, nd_blk: remove mmio_flush_range()
libnvdimm, btt: rework error clearing
libnvdimm: fix potential deadlock while clearing errors
libnvdimm, btt: cache sector_size in arena_info
libnvdimm, btt: ensure that flags were also unchanged during a map_read
libnvdimm, btt: refactor map entry operations with macros
libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
ext4: perform dax_device lookup at mount
ext2: perform dax_device lookup at mount
xfs: perform dax_device lookup at mount
dax: introduce a fs_dax_get_by_bdev() helper
libnvdimm, btt: check memory allocation failure
libnvdimm, label: fix index block size calculation
...
|
|
The following revert:
2b85b3d22920 ("x86/acpi: Restore the order of CPU IDs")
... got rid of __generic_processor_info(), but forgot to remove its
declaration in mpspec.h.
Remove the declaration and update the comments as well.
Signed-off-by: Dou Liyang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Merge more updates from Andrew Morton:
- most of the rest of MM
- a small number of misc things
- lib/ updates
- checkpatch
- autofs updates
- ipc/ updates
* emailed patches from Andrew Morton <[email protected]>: (126 commits)
ipc: optimize semget/shmget/msgget for lots of keys
ipc/sem: play nicer with large nsops allocations
ipc/sem: drop sem_checkid helper
ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
ipc: convert ipc_namespace.count from atomic_t to refcount_t
kcov: support compat processes
sh: defconfig: cleanup from old Kconfig options
mn10300: defconfig: cleanup from old Kconfig options
m32r: defconfig: cleanup from old Kconfig options
drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
drivers/pps: aesthetic tweaks to PPS-related content
cpumask: make cpumask_next() out-of-line
kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
kmod: split off umh headers into its own file
MAINTAINERS: clarify kmod is just a kernel module loader
kmod: split out umh code into its own file
test_kmod: flip INT checks to be consistent
test_kmod: remove paranoid UINT_MAX check on uint range processing
vfat: deduplicate hex2bin()
...
|
|
These are single instructions on x86. There's no 64-bit instruction for
x86-32, but we don't yet have any user for memset64() on 32-bit
architectures, so don't bother to implement it.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: David Miller <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Russell King <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Soft dirty bit is designed to keep tracked over page migration. This
patch makes it work in the same manner for thp migration too.
Signed-off-by: Naoya Horiguchi <[email protected]>
Signed-off-by: Zi Yan <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Nellans <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add thp migration's core code, including conversions between a PMD entry
and a swap entry, setting PMD migration entry, removing PMD migration
entry, and waiting on PMD migration entries.
This patch makes it possible to support thp migration. If you fail to
allocate a destination page as a thp, you just split the source thp as
we do now, and then enter the normal page migration. If you succeed to
allocate destination thp, you enter thp migration. Subsequent patches
actually enable thp migration for each caller of page migration by
allowing its get_new_page() callback to allocate thps.
[[email protected]: fix gcc-4.9.0 -Wmissing-braces warning]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix x86_64 allnoconfig warning]
Signed-off-by: Zi Yan <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Nellans <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|