aboutsummaryrefslogtreecommitdiff
path: root/arch/um/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-10-23compat_ioctl: move WDIOC handling into wdt driversArnd Bergmann1-0/+1
All watchdog drivers implement the same set of ioctl commands, and fortunately all of them are compatible between 32-bit and 64-bit architectures. Modern drivers always go through drivers/watchdog/wdt.c as an abstraction layer, but older ones implement their own file_operations on a character device for this. Move the handling from fs/compat_ioctl.c into the individual drivers. Note that most of the legacy drivers will never be used on 64-bit hardware, because they are for an old 32-bit SoC implementation, but doing them all at once is safer than trying to guess which ones do or do not need the compat_ioctl handling. Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2019-10-23compat_ioctl: remove translation for sound ioctlsArnd Bergmann1-0/+1
The SNDCTL_* and SOUND_* commands are the old OSS user interface. I checked all the sound ioctl commands listed in fs/compat_ioctl.c to see if we still need the translation handlers. Here is what I found: - sound/oss/ is (almost) gone from the kernel, this is what actually needed all the translations - The ALSA emulation for OSS correctly handles all compat_ioctl commands already. - sound/oss/dmasound/ is the last holdout of the original OSS code, this is only used on arch/m68k, which has no 64-bit mode and hence needs no compat handlers - arch/um/drivers/hostaudio_kern.c may run in 64-bit mode with 32-bit x86 user space underneath it. This rare corner case is the only one that still needs the compat handlers. By adding a simple redirect of .compat_ioctl to .unlocked_ioctl in the UML driver, we can remove all the COMPATIBLE_IOCTL() annotations without a change in functionality. For completeness, I'm adding the same thing to the dmasound file, knowing that it makes no difference. The compat_ioctl list contains one comment about SNDCTL_DSP_MAPINBUF and SNDCTL_DSP_MAPOUTBUF, which actually would need a translation handler if implemented. However, the native implementation just returns -EINVAL, so we don't care. Reviewed-by: Takashi Iwai <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2019-09-15um: Add SPDX headers for files in arch/um/driversAlex Dewar53-53/+53
Convert files to use SPDX header. All files are licensed under the GPLv2. Signed-off-by: Alex Dewar <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-09-15um: virtio: Implement VHOST_USER_PROTOCOL_F_REPLY_ACKJohannes Berg2-18/+84
Implement the VHOST_USER_PROTOCOL_F_REPLY_ACK extension for both slave requests (previous patch) where we have to reply and our own requests where it helps understand if the slave failed. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-09-15um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQJohannes Berg2-23/+147
Implement the communication channel for the device to notify us of some events, and notably implement the handling of the config updates needed for the combination of this feature and VHOST_USER_PROTOCOL_F_CONFIG. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-09-15um: drivers: Add virtio vhost-user driverErel Geron4-0/+1112
This module allows virtio devices to be used over a vhost-user socket. Signed-off-by: Erel Geron <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-09-15um: Error handling fixes in vector driversAnton Ivanov3-7/+35
With the addition of bess support which uses connection oriented SEQPACKET sockets the vector routines can now encounter a "remote end closed the connection" scenario. This adds handling code to detect it in the TX path and the legacy RX path. There is no way to detect it in the vector RX path because that can legitimately return 0 even if the remote end has not closed the connection. As a result the detection is delayed until the first TX event after the close. Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-09-15um: Add checks to mtu parameter parsingAnton Ivanov1-1/+2
Adds a sanity check to the parsing of mtu command line param Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-09-15um: Added support for unix socket transports and bess transportAnton Ivanov3-1/+101
This adds support for the UNIX domain socket transports in general and implements a Netsys::BESS compatible transport interface. For details on Netsys::BESS see https://github.com/NetSys/bess Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-09-15um: Add legacy tap support and rename existing vector to hybridAnton Ivanov4-87/+151
1. Adds legacy tap support 2. Renames tap+raw as hybrid Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-07-02um: Remove drivers/ssl.hJohannes Berg2-14/+0
This file just contains two unused prototypes, remove it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-07-02um: Fix IRQ controller regression on console readJouni Malinen1-8/+44
The conversion of UML to use epoll based IRQ controller claimed that clone_one_chan() can safely call um_free_irq() while starting to ignore the delay_free_irq parameter that explicitly noted that the IRQ cannot be freed because this is being called from chan_interrupt(). This resulted in free_irq() getting called in interrupt context ("Trying to free IRQ 6 from IRQ context!"). Fix this by restoring previously used delay_free_irq processing. Fixes: ff6a17989c08 ("Epoll based IRQ controller") Signed-off-by: Jouni Malinen <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-12Merge tag 'for-linus-5.2-rc1' of ↵Linus Torvalds2-178/+178
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Kconfig cleanups - Fix cpu_all_mask() usage - Various bug fixes * tag 'for-linus-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: irq: don't set the chip for all irqs um: define set_pte_at() as a static inline function, not a macro um: remove uses of variable length arrays um: remove unused variable uml: fix a boot splat wrt use of cpu_all_mask um: Do not unlock mutex that is not hold. hostfs: fix mismatch between link_file definition and declaration arch: um: drivers: Kconfig: pedantic formatting arch: um: Kconfig: pedantic indention cleanups um: Revert to using stack for pt_regs in signal handling
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07um: Do not unlock mutex that is not hold.Daniel Walter1-2/+2
Return error instead of trying to unlock a mutex that is not hold. Signed-off-by: Daniel Walter <[email protected]> Reviewed-by: Anton Ivanov <[email protected]> Acked-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-05-07arch: um: drivers: Kconfig: pedantic formattingEnrico Weigelt, metux IT consult1-176/+176
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Just indention changes. Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov1-1/+1
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <[email protected]> Cc: Yongzhi Pan <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: David Vrabel <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Miklos Szeredi <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Kirill Tkhai <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Nikolaus Rath <[email protected]> Cc: Han-Wen Nienhuys <[email protected]> Cc: Anatolij Gustschin <[email protected]> Cc: Jeff Dike <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Anton Ivanov <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James R. Van Zandt" <[email protected]> Cc: Corey Minyard <[email protected]> Cc: Harald Welte <[email protected]> Acked-by: Lubomir Rintel <[email protected]> [scr24x_cs] Cc: Stefan Richter <[email protected]> Cc: Johan Hovold <[email protected]> Cc: David Herrmann <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]> [watchdog/* hwmon/*] Cc: Rudolf Marek <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Karsten Keil <[email protected]> Cc: Jacek Anaszewski <[email protected]> Cc: Pavel Machek <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Kurt Schwemmer <[email protected]> Acked-by: Logan Gunthorpe <[email protected]> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <[email protected]> [drivers/pci/switch/switchtec] Cc: Benson Leung <[email protected]> Acked-by: Enric Balletbo i Serra <[email protected]> [platform/chrome] Cc: Alessandro Zummo <[email protected]> Acked-by: Alexandre Belloni <[email protected]> [rtc/*] Cc: Mark Brown <[email protected]> Cc: Wim Van Sebroeck <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: [email protected] Cc: Wan ZongShun <[email protected]> Cc: Zwane Mwaikambo <[email protected]> Cc: Marek Lindner <[email protected]> Cc: Simon Wunderlich <[email protected]> Cc: Antonio Quartulli <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Signed-off-by: Kirill Smelkov <[email protected]>
2019-05-05um: vector netdev: adjust to xmit_more API changeJohannes Berg1-1/+1
Replace skb->xmit_more usage by netdev_xmit_more(). Fixes: 4f296edeb9d4 ("drivers: net: aurora: use netdev_xmit_more helper") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-15Merge branch 'for-linus-5.1-rc1' of ↵Linus Torvalds2-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: "Bugfix for the UML block device driver" * 'for-linus-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix for a possible OOPS in ubd initialization um: Remove duplicated include from vector_user.c
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport2-0/+6
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [[email protected]: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [[email protected]: fix xtensa printk warning] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Anders Roxell <[email protected]> Reviewed-by: Guo Ren <[email protected]> [c-sky] Acked-by: Paul Burton <[email protected]> [MIPS] Acked-by: Heiko Carstens <[email protected]> [s390] Reviewed-by: Juergen Gross <[email protected]> [Xen] Reviewed-by: Geert Uytterhoeven <[email protected]> [m68k] Acked-by: Max Filippov <[email protected]> [xtensa] Cc: Catalin Marinas <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Dennis Zhou <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Rob Herring <[email protected]> Cc: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-03-06um: Fix for a possible OOPS in ubd initializationAnton Ivanov1-3/+3
If the ubd device failed to allocate a queue during initialization it tried call blk_cleanup_queue resulting in an oops. This patch simplifies the cleanup logic and ensures that blk_queue_cleanup is called only if there is a valid queue. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-03-06um: Remove duplicated include from vector_user.cYueHaibing1-3/+0
Remove duplicated include. Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Anton Ivanov <[email protected]> Acked-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-12-27um: Remove obsolete reenable_XX callsAnton Ivanov7-27/+0
reenable_fd has been a NOP since the introduction of the EPOLL based interrupt controller. reenable_channel() is no longer needed as the flow control is now handled via the write IRQs on the channel. Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-12-27um: writev needs <sys/uio.h>Christoph Hellwig1-0/+1
vector_user.c doesn't compile without this for me. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-12-27um: Add support for DISCARD in the UBD DriverAnton Ivanov1-11/+54
Support for DISCARD and WRITE_ZEROES in the ubd driver using fallocate. DISCARD is enabled by default and can be disabled using a new UBD command line flag. If the underlying fs on which the UBD image is stored does not support DISCARD the support for both DISCARD and WRITE_ZEROES is turned off. Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-12-27um: Remove unsafe printks from the io threadAnton Ivanov1-25/+17
Printk out of the io thread has been proven to be unsafe. This is not surprising as the thread is part of the UML hypervisor code. It is not supposed to invoke any kernel code/resources. It is necesssary to pass the error to the block IO layer and let it Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-12-27um: Clean-up command processing in UML UBD driverAnton Ivanov1-30/+47
Clean-up command processing and return BLK_STS_NOTSUP for uknown commands. Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-12-27um: Switch to block-mq constants in the UML UBD driverAnton Ivanov1-28/+38
Switch to block mq-constants for both commands, error codes and various computations. Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-12-27um: Include sys/uio.h to have writev()Richard Weinberger1-0/+1
sys/uio.h gives us writev(), otherwise the build might fail on some systems. Fixes: 49da7e64f33e ("High Performance UML Vector Network Driver") Signed-off-by: Richard Weinberger <[email protected]>
2018-11-09Merge tag 'for-linus-20181109' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+8
Pull block layer fixes from Jens Axboe: - Two fixes for an ubd regression, one for missing locking, and one for a missing initialization of a field. The latter was an old latent bug, but it's now visible and triggers (Me, Anton Ivanov) - Set of NVMe fixes via Christoph, but applied manually due to a git tree mixup (Christoph, Sagi) - Fix for a discard split regression, in three patches (Ming) - Update libata git trees (Geert) - SPDX identifier for sata_rcar (Kuninori Morimoto) - Virtual boundary merge fix (Johannes) - Preemptively clear memory we are going to pass to userspace, in case the driver does a short read (Keith) * tag 'for-linus-20181109' of git://git.kernel.dk/linux-block: block: make sure writesame bio is aligned with logical block size block: cleanup __blkdev_issue_discard() block: make sure discard bio is aligned with logical block size Revert "nvmet-rdma: use a private workqueue for delete" nvme: make sure ns head inherits underlying device limits nvmet: don't try to add ns to p2p map unless it actually uses it sata_rcar: convert to SPDX identifiers ubd: fix missing initialization of io_req block: Clear kernel memory before copying to user MAINTAINERS: Fix remaining pointers to obsolete libata.git ubd: fix missing lock around request issue block: respect virtual boundary mask in bvecs
2018-11-08ubd: fix missing initialization of io_reqAnton Ivanov1-2/+1
The SYNC path doesn't initialize io_req->error, which can cause random errors. Before the conversion to blk-mq, we always completed requests with BLK_STS_OK status, but now we actually look at the error field and this issue becomes apparent. Signed-off-by: Anton Ivanov <[email protected]> [axboe: fixed up commit message to explain what is actually going on] Signed-off-by: Jens Axboe <[email protected]>
2018-11-07ubd: fix missing lock around request issueJens Axboe1-2/+7
We need to hold the device lock (and disable interrupts) while writing new commands, or we could be interrupted while that is happening and read invalid requests in the completion path. Fixes: 4e6da0fe8058 ("um: Convert ubd driver to blk-mq") Tested-by: Richard Weinberger <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-10-31Merge branch 'for-linus-4.20-rc1' of ↵Linus Torvalds4-17/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - removal of old and dead code - a bug fix for our tty driver - other minor cleanups across the code base * 'for-linus-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Make line/tty semantics use true write IRQ um: trap: fix spelling mistake, EACCESS -> EACCES um: Don't hardcode path as it is architecture dependent um: NULL check before kfree is not needed um: remove unused AIO code um: Give start_idle_thread() a return code um: Remove update_debugregs() um: Drop own definition of PTRACE_SYSEMU/_SINGLESTEP
2018-10-31memblock: stop using implicit alignment to SMP_CACHE_BYTESMike Rapoport2-2/+2
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [[email protected]: changelog update] [[email protected]: coding-style fixes] [[email protected]: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Suggested-by: Michal Hocko <[email protected]> Acked-by: Paul Burton <[email protected]> [MIPS] Acked-by: Michael Ellerman <[email protected]> [powerpc] Acked-by: Michal Hocko <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michal Simek <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Russell King <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport2-2/+2
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [[email protected]: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Burton <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Serge Semin <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-10-31memblock: replace alloc_bootmem with memblock_allocMike Rapoport2-2/+2
The alloc_bootmem(size) is a shortcut for allocation of SMP_CACHE_BYTES aligned memory. When the align parameter of memblock_alloc() is 0, the alignment is implicitly set to SMP_CACHE_BYTES and thus alloc_bootmem(size) and memblock_alloc(size, 0) are equivalent. The conversion is done using the following semantic patch: @@ expression size; @@ - alloc_bootmem(size) + memblock_alloc(size, 0) Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Michal Simek <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Burton <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Serge Semin <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-10-29um: Make line/tty semantics use true write IRQAnton Ivanov1-2/+2
This fixes a long standing bug where large amounts of output could freeze the tty (most commonly seen on stdio console). While the bug has always been there it became more pronounced after moving to the new interrupt controller. The line semantics are now changed to have true IRQ write semantics which should further improve the tty/line subsystem stability and performance Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-10-29um: Don't hardcode path as it is architecture dependentRitesh Raj Sarraf1-1/+1
The current code fails to run on amd64 because of hardcoded reference to i386 Signed-off-by: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-10-29um: NULL check before kfree is not neededYueHaibing2-14/+7
kfree(NULL) is safe,so this removes NULL check before freeing the mem Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-10-18ubd: remove use of blk_rq_map_sgChristoph Hellwig1-104/+54
There is no good reason to create a scatterlist in the ubd driver, it can just iterate the request directly. Signed-off-by: Christoph Hellwig <[email protected]> [rw: Folded in improvements as discussed with hch and jens] Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-10-14um: Convert ubd driver to blk-mqRichard Weinberger1-85/+93
Convert the driver to the modern blk-mq framework. As byproduct we get rid of our open coded restart logic and let blk-mq handle it. Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-09-28block: genhd: add 'groups' argument to device_add_diskHannes Reinecke1-1/+1
Update device_add_disk() to take an 'groups' argument so that individual drivers can register a device with additional sysfs attributes. This avoids race condition the driver would otherwise have if these groups were to be created with sysfs_add_groups(). Signed-off-by: Martin Wilck <[email protected]> Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-08-15Merge tag 'kconfig-v4.19-2' of ↵Linus Torvalds1-0/+337
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig consolidation from Masahiro Yamada: "Consolidation of Kconfig files by Christoph Hellwig. Move the source statements of arch-independent Kconfig files instead of duplicating the includes in every arch/$(SRCARCH)/Kconfig" * tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: add a Memory Management options" menu kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt kconfig: use a menu in arch/Kconfig to reduce clutter kconfig: include kernel/Kconfig.preempt from init/Kconfig Kconfig: consolidate the "Kernel hacking" menu kconfig: include common Kconfig files from top-level Kconfig kconfig: remove duplicate SWAP symbol defintions um: create a proper drivers Kconfig um: cleanup Kconfig files um: stop abusing KBUILD_KCONFIG
2018-08-02um: create a proper drivers KconfigChristoph Hellwig1-0/+337
Merge arch/um/Kconfig.char and arch/um/Kconfig.net into a new arch/um/drivers/Kconfig. This fits the way Kconfig files are placed elsewhere in the kernel tree. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Richard Weinberger <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-19kbuild: change ld_flags to contain LDFLAGS_$(@F)Masahiro Yamada1-2/+2
Put $(LDFLAGS_$(@F)) into ld_flags so that $(LDFLAGS_pcap.o) and $(LDFLAGS_vde.o) in arch/um/drivers/Makefile are absorbed. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]>
2018-06-16Merge branch 'for-linus-4.18-rc1' of ↵Linus Torvalds1-6/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull uml updates from Richard Weinberger: "Minor updates for UML: - fixes for our new vector network driver by Anton - initcall cleanup by Alexander - We have a new mailinglist, sourceforge.net sucks" * 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix raw interface options um: Fix initialization of vector queues um: remove uml initcalls um: Update mailing list address
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook2-12/+12
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-06-10um: Fix raw interface optionsAnton Ivanov1-3/+2
Raw interface initialization needs QDISC_BYPASS. Otherwise it sees its own packets when transmitting. Fixes: 49da7e64f33e ("High Performance UML Vector Network Driver") Cc: <[email protected]> Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-06-10um: Fix initialization of vector queuesAnton Ivanov1-3/+12
UML vector drivers could derefence uninitialized memory when cleaning up after a queue allocation failure. Fixes: 49da7e64f33e ("High Performance UML Vector Network Driver") Cc: <[email protected]> Reported-by: Dan Capenter <[email protected]> Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.