| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This change adds infrastructure (CONFIG_TILE_HVGLUE_TRACE) that
provides C code wrappers for the calls the kernel makes to the Tilera
hypervisor. This allows standard kernel infrastructure like FTRACE to
be able to instrument hypervisor calls.
To allow direct calls to the true API, we export their names with a
leading underscore as well. This is important for the few contexts
where we need to make hypervisor calls without touching the stack.
As part of this change, we also switch from creating the symbols
with linker magic to creating them with assembler magic. This lets
us provide a symbol type and generally make them appear more as symbols
and less as just random values in the Elf namespace.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
If ioreamp_prot() fails in ioremap_page_range() due to kernel memory
exhaustion, we previously would leak a struct vm_struct.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
This change creates the framework for vDSO calls, makes the existing
rt_sigreturn() mechanism use it, and adds a fast gettimeofday().
Now that we need to expose the vDSO address to userspace, we add
AT_SYSINFO_EHDR to the set of aux entries provided to userspace.
(You can disable any extra vDSO support by booting with vdso=0,
but the rt_sigreturn vDSO page will still be provided.)
Note that glibc has supported the tile vDSO since release 2.17.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The tile code notifies the simulator of new ET_EXEC objects starting
to execute so that tracing code can properly annotate the objects.
However, we didn't support ET_DYN executables like ld.so, so we
didn't properly load symbols, etc. This change enables that support;
we use a variant of the SIM_CONTROL_DLOPEN simulator notification
that newer simulators will recognize and use to set the base address
for the next SIM_CONTROL_OS_EXEC notification.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
First, don't re-enable interrupts blindly in the Linux trap handler.
We already handle page faults this way; synchronous interrupts like
ILL_TRANS will fire even when interrupts are disabled, and we don't
want to re-enable interrupts in that case.
For ILL_TRANS, we now pass the ILL_VA_PC reason into the trap handler
so we can report it properly; this is the address that caused the
illegal translation trap. We print the address as part of the
pr_alert() message now if it's coming from the kernel.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
It's much easier to read register dumps if you read vertically
rather than horizontally, since the register numbers line up
and lead the eye down more than to the right.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
First, fix a bug in asm/unaligned.h; we need to just use the asm-generic
unaligned.h so we properly choose endian-correct flavors.
Second, keep the hv/hypervisor.h ABI fully "native" in the sense that
we don't have __BIG_ENDIAN__ ifdefs there. Instead, we use macros in
the head_NN.S assembly code to properly extract two 32-bit structure
members from a 64-bit register holding the structure.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
This change adds support for CONFIG_PREEMPT (full kernel preemption).
In addition to the core support, this change includes a number
of places where we fix up uses of smp_processor_id() and per-cpu
variables. I also eliminate the PAGE_HOME_HERE and PAGE_HOME_UNKNOWN
values for page homing, as it turns out they weren't being used.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Since it's a no-op on tile anyway, there's no reason to be calling
it in tile-specific code.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
First, in huge_pte_offset(), we were erroneously checking
pgd_present(), which is always true, rather than pud_present(),
which is the thing that tells us if there is a top-level (L0) PTE.
Fixing this means we properly look up huge page entries only when
the Present bit is actually set in the PTE.
Second, use the standard pte_alloc_map() instead of the hand-rolled
pte_alloc_hugetlb() routine that basically was written to avoid
worrying about CONFIG_HIGHPTE. However, we no longer plan to support
HIGHPTE, so a separate routine was just unnecessary code duplication.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
This change adds support for avoiding recursive backtracer crashes;
we haven't seen this in practice other than when things are seriously
corrupt, but it may help avoid losing the root cause of a crash.
Also, don't abort kernel backtracers for invalid userspace PC's.
If we do, we lose the ability to backtrace through a userspace
call to a bad address above PAGE_OFFSET, even though that it can
be perfectly reasonable to continue the backtrace in such a case.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
This change enables unaligned userspace memory access via a kernel
fast path on tilegx. The kernel tracks user PC/instruction pairs
per-thread using a direct-mapped cache in userspace. The cache
maps those PC/instruction pairs to JIT'ed instruction sequences that
load or store using byte-wide load store intructions and then
synthesize 2-, 4- or 8-byte load or store results. Once an
instruction has been seen to generate an unaligned access once,
subsequent hits on that instruction typically require overhead
of only around 50 cycles if cache and TLB is hot.
We support the prctl() PR_GET_UNALIGN / PR_SET_UNALIGN sys call to
enable or disable unaligned fixups on a per-process basis.
To do this we pull some of the tilepro unaligned support out of the
single_step.c file; tilepro uses instruction disassembly for both
single-step and unaligned access support. Since tilegx actually has
hardware singlestep support, though, it's cleaner to keep the tilegx
unaligned access code in a separate file. While we're at it,
properly rename the tilepro-specific types, etc., to have tilepro
suffixes instead of generic tile suffixes.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Pointed out by checkpatch. A few of the DEFINE() lines were
properly written without backslash continuation; fix the rest.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
As specified, the test wasn't correct, and in any case it should
be a BUILD_BUG_ON.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Signed-off-by: Chris Metcalf <[email protected]>
|
|
This change adds support for the "memmap" boot parameter similar
to what x86 provides. The tile version supports "memmap=1G$5G",
for example, as a way to reserve a 1 GB range starting at PA 5GB.
The memory is reserved via bootmem during startup, and we create a
suitable "struct resource" marked as "Reserved" so you can see the
range reported by /proc/iomem. Up to 64 such regions can currently
be reserved on the boot command line.
We do not support the x86 options "memmap=nn@ss" (force some memory
to be available at the given address) since it's pointless to try to
have Linux use memory the Tilera hypervisor hasn't given it. We do
not support "memmap=nn#ss" to add an ACPI range for later processing,
since we don't support ACPI. We do not support "memmap=exactmap"
since we don't support reading the e820 information from the BIOS
like x86 does. I did add support for "memmap=nn" (and the synonym
"mem=nn") which cap the highest PA value at "nn"; these are both
just a synonym for the existing tile boot option "maxmem".
Signed-off-by: Chris Metcalf <[email protected]>
|
|
This change improves and cleans up the tile console.
- We enable HVC_IRQ support on tilegx, with the addition of a new
Tilera hypervisor API for tilegx to allow a console IPI. If IPI
support is not available we fall back to the previous polling mode.
- We simplify the earlyprintk code to use CON_BOOT and eliminate some
of the other supporting earlyprintk code.
- A new tile_console_write() primitive is used to send output to
the console and is factored out of the hvc_tile driver.
This lets us support a "sim_console" boot argument to allow using
simulator hooks to send output to the "console" as a slightly
faster alternative to emulating the hardware more directly.
Signed-off-by: Chris Metcalf <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that we have weak versions for each of the PCI MSI architecture
functions, we can actually build the MSI support for all platforms,
regardless of whether they provide or not architecture-specific
versions of those functions. For this reason, the ARCH_SUPPORTS_MSI
hidden kconfig boolean becomes useless, and this patch gets rid of it.
Signed-off-by: Thomas Petazzoni <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
Tested-by: Daniel Price <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: [email protected]
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: [email protected]
Cc: Russell King <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: [email protected]
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: David S. Miller <[email protected]>
Cc: [email protected]
Cc: Chris Metcalf <[email protected]>
Signed-off-by: Jason Cooper <[email protected]>
|
|
Signed-off-by: Chris Metcalf <[email protected]>
|
|
We can take advantage of the fact that bit 29 is hard-wired
to zero in register TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR.
This is handy since at the moment we only allocate one 4GB
region for vmalloc, and with this change we can allocate
four or more TRIO MACs without using up all the vmalloc space.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
On Tilera Gx72 systems, the logic for figuring out whether
a given port is root complex is slightly different.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The code incorrectly masked with PAGE_OFFSET instead of
PAGE_SIZE-1. This only matters when trying to do a
non page-aligned DMA; it was noticed during code inspection.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The standard kernel function dma_get_required_mask() uses the
highest DRAM address to determine if 32-bit or 64-bit DMA addressing
is needed. This only works on architectures that have direct mapping
between the PA and the PCI address space, i.e. those that don't have
I/O TLBs or have I/O TLB but choose to use direct mapping. Neither
of these are true for tilegx. Whether to use 64-bit DMA should depend
on the PCI device's capability only, not on the amount of DRAM
installeds, so we now advertise a 64-bit DMA mask unconditionally.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Using the low-level hv_dev_pread() API makes assumptions about the
layout of datastructures in the Tilera hypervisor API; it's better to
use the gxio_XXX accessor and the pcie_trio_ports_property struct.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
This change is purely stylistic but improves the readability
of the tile PCI RC driver.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The .mem_resources[] field in the pci_controller struct
is now obsoleted by the .mem_space and .io_space fields.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The TRIO shim initialization is shared with other kernel drivers
such as the endpoint and StreamIO drivers, so reorganize the
initialization flow to ensure that the root complex driver properly
initializes TRIO state regardless of what kind of TRIO driver will
end up using the shim.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Signed-off-by: Chris Metcalf <[email protected]>
|
|
To enable this functionality, configure CONFIG_TILE_PCI_IO. Without
this flag, the kernel still assigns I/O address ranges to the
devices, but no TRIO resource and mapping support is provided.
We assign disjoint I/O address ranges to separate PCIe domains.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Besides using pr_info() to print the linkdown status for a plug-in
slot, add extra indication that this is expected if the slot is empty.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
To support PCIe devices with higher number of MSI-X interrupt vectors,
e.g. 16 for the LSI RAID card, enhance the Gx RC stack to provide more
MSI-X vectors by using the TRIO Scatter Queues, which provide 8 more
vectors in addition to ~10 from the Map Mem regions.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The LSI MEGARAID SAS HBA suffers from the problem where it can do
64-bit DMA to streaming buffers but not to consistent buffers.
In other words, 64-bit DMA is used for disk data transfers and 32-bit
DMA must be used for control message transfers. According to LSI,
the firmware is not fully functional yet. This change implements a
kind of hybrid dma_ops to support this.
Note that on most other platforms, the 64-bit DMA addressing space is the
same as the 32-bit DMA space and they overlap the physical memory space.
No special arrangement is needed to support this kind of mixed DMA
capability. On TILE-Gx, the 64-bit DMA space is completely separate
from the 32-bit DMA space. Due to the use of the IOMMU, the 64-bit DMA
space doesn't overlap the physical memory space. On the other hand,
the 32-bit DMA space overlaps the physical memory space under 4GB.
The separate address spaces make it necessary to have separate dma_ops.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
If we are rebooting (e.g. via kexec) then the PCI RC link may
already be up. In that case, we don't want to do the software
fixup to force the link up, since that can degrade it to Gen1.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Allow longer delays if requested, and print the info messages
as we are performing the delay, not when parsing the arguments.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Fix a bug in the tilepro PCI resource allocation code that could make
the bootmem allocator unhappy if 4GB is installed on mshim 0.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
- remove unneeded <linux/bootmem.h> include in pci.c
- eliminate unused pci_controller.first_busno field
- prefer msleep to mdelay
- remove stale comment about pci_scan_bus_parented()
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Using strlen as a model, add length checking to create strnlen.
Signed-off-by: Ken Steele <[email protected]>
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Signed-off-by: Chris Metcalf <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The initial driver support was for a single mPIPE shim on the chip
(as is the case for the Gx36 hardware). The Gx72 chip has two mPIPE
shims, so we extend the driver to handle that case.
Signed-off-by: Chris Metcalf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Chris Metcalf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This change cleans up the string code in a number of ways:
- For memcpy(), fix bug in prefetch and increase distance to 3 lines;
optimize for unaligned data; do all loads before wh64 to make memcpy
safe for forward-overlapping calls; etc. Performance is improved.
- Use new copy_byte() function on tilegx to spread a single byte value
out into a full word using the shufflebytes instruction.
- Clean up header include ordering to be more canonical, and remove
spurious #undefs of function names.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The "inv" (invalidate) instruction is generally less safe than "finv"
(flush and invalidate), as it will drop dirty data from the cache.
It turns out we have almost no need for "inv" (other than for the
older 32-bit architecture in some limited cases), so convert to
"finv" where possible and delete the extra "inv" infrastructure.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
First, clean up active hardwalls in exit_thread(). This is a better
place than in arch_release_thread_info().
Second, mask out any non-online cpus from the cpumask after
validating any required semantics of the cpu set.
Signed-off-by: Chris Metcalf <[email protected]>
|
|
Macro arch_provides_topology_pointers is pointless now, remove it.
Signed-off-by: Hanjun Guo <[email protected]>
Cc: Chris Metcalf <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Need add cmpxchg64(), or will cause compiling issue.
Need define it as cmpxchg() only for 64-bit operation, since cmpxchg()
can support 8 bytes.
The related error (with allmodconfig):
drivers/block/blockconsole.c: In function ‘bcon_advance_console_bytes’:
drivers/block/blockconsole.c:164:2: error: implicit declaration of function ‘cmpxchg64’ [-Werror=implicit-function-declaration]
Signed-off-by: Chen Gang <[email protected]>
Signed-off-by: Chris Metcalf <[email protected]>
|
|
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/tile uses of the __cpuinit macros from
all C files. Currently tile does not have any __CPUINIT used in
assembly files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Chris Metcalf <[email protected]>
Signed-off-by: Paul Gortmaker <[email protected]>
|
|
Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.
Signed-off-by: Michel Lespinasse <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: David Howells <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Richard Henderson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
A few remaining architectures directly kill the page faulting task in an
out of memory situation. This is usually not a good idea since that
task might not even use a significant amount of memory and so may not be
the optimal victim to resolve the situation.
Since 2.6.29's 1c0fe6e ("mm: invoke oom-killer from page fault") there
is a hook that architecture page fault handlers are supposed to call to
invoke the OOM killer and let it pick the right task to kill. Convert
the remaining architectures over to this hook.
To have the previous behavior of simply taking out the faulting task the
vm.oom_kill_allocating_task sysctl can be set to 1.
Signed-off-by: Johannes Weiner <[email protected]>
Reviewed-by: Michal Hocko <[email protected]>
Cc: KAMEZAWA Hiroyuki <[email protected]>
Acked-by: David Rientjes <[email protected]>
Acked-by: Vineet Gupta <[email protected]> [arch/arc bits]
Cc: James Hogan <[email protected]>
Cc: David Howells <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Chen Liqin <[email protected]>
Cc: Lennox Wu <[email protected]>
Cc: Chris Metcalf <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|