aboutsummaryrefslogtreecommitdiff
path: root/arch/sparc
AgeCommit message (Collapse)AuthorFilesLines
2019-05-10cpufreq: Call transition notifier only once for each policyViresh Kumar1-12/+16
Currently, the notifiers are called once for each CPU of the policy->cpus cpumask. It would be more optimal if the notifier can be called only once and all the relevant information be provided to it. Out of the 23 drivers that register for the transition notifiers today, only 4 of them do per-cpu updates and the callback for the rest can be called only once for the policy without any impact. This would also avoid multiple function calls to the notifier callbacks and reduce multiple iterations of notifier core's code (which does locking as well). This patch adds pointer to the cpufreq policy to the struct cpufreq_freqs, so the notifier callback has all the information available to it with a single call. The five drivers which perform per-cpu updates are updated to use the cpufreq policy. The freqs->cpu field is redundant now and is removed. Acked-by: David S. Miller <[email protected]> (sparc) Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-05-09sparc64: simplify reduce_memory() functionMike Rapoport1-40/+2
The reduce_memory() function clampls the available memory to a limit defined by the "mem=" command line parameter. It takes into account the amount of already reserved memory and excludes it from the limit calculations. Rather than traverse memblocks and remove them by hand, use memblock_reserved_size() to account the reserved memory and memblock_enforce_memory_limit() to clamp the available memory. Signed-off-by: Mike Rapoport <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-09sparc: use struct_size() in kzalloc()Gustavo A. R. Silva1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: merge iommu_get_one and __sbus_iommu_map_pageChristoph Hellwig1-32/+24
There is only one caller of iommu_get_one left, so merge it into that one to clean things up a bit. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: use __sbus_iommu_map_page to implement the map_sg pathChristoph Hellwig1-21/+10
This means we handle > PAGE_SIZE offsets fine, and grow the size check so far only performed in the map_page path. We lose the optimization to not double flush a page if it apears in multiple consecutive SG list entries. But at least for block I/O those don't happen anymore since we properly merge in higher layers anyway. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: fix __sbus_iommu_map_page for highmem pagesChristoph Hellwig1-8/+7
__sbus_iommu_map_page currently assumes all pages are mapped into the kernel direct mapping. Switch to using physical address instead of virtual ones for all the normal mapping operations, and only use the virtual addresses for cache flushing when not operating on a highmem page. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: move per-page flushing into __sbus_iommu_map_pageChristoph Hellwig1-12/+14
This prepares for reusing __sbus_iommu_map_page in the map_sg path. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: pass a physical address to iommu_get_oneChristoph Hellwig1-6/+7
No need for the page structure, just the paddr / pfn. This is going to simplify fixes to the callers. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: create a common helper for map_sgChristoph Hellwig1-20/+17
Share the code for the global and per-page flush map_sg loops using a simple bool parameter to disable the per-page flush for the former variant. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: merge iommu_release_one and sbus_iommu_unmap_pageChristoph Hellwig1-14/+7
There is only one caller of iommu_release_one left, so merge it into that one to clean things up a bit. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: use sbus_iommu_unmap_page in sbus_iommu_unmap_sgChristoph Hellwig1-3/+3
Use the page-level helper instead of duplicating the logic, while also fixing the incorrect handling of larger than page sized offsets in the sg variant. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc/iommu: use !PageHighMem to check if a page has a kernel mappingChristoph Hellwig1-1/+2
This deobsfucates the check a bit, and prepares for future changes. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08sparc: vdso: add FORCE to the build rule of %.soMasahiro Yamada1-1/+1
$(call if_changed,...) must have FORCE as a prerequisite. Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-08arch:sparc:kernel/uprobes.c : Remove duplicate headerJagadeesh Pagadala1-1/+0
Remove duplicate header which is included twice. Signed-off-by: Jagadeesh Pagadala <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-15/+0
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge tag 'audit-pr-20190507' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "We've got a reasonably broad set of audit patches for the v5.2 merge window, the highlights are below: - The biggest change, and the source of all the arch/* changes, is the patchset from Dmitry to help enable some of the work he is doing around PTRACE_GET_SYSCALL_INFO. To be honest, including this in the audit tree is a bit of a stretch, but it does help move audit a little further along towards proper syscall auditing for all arches, and everyone else seemed to agree that audit was a "good" spot for this to land (or maybe they just didn't want to merge it? dunno.). - We can now audit time/NTP adjustments. - We continue the work to connect associated audit records into a single event" * tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits) audit: fix a memory leak bug ntp: Audit NTP parameters adjustment timekeeping: Audit clock adjustments audit: purge unnecessary list_empty calls audit: link integrity evm_write_xattrs record to syscall event syscall_get_arch: add "struct task_struct *" argument unicore32: define syscall_get_arch() Move EM_UNICORE to uapi/linux/elf-em.h nios2: define syscall_get_arch() nds32: define syscall_get_arch() Move EM_NDS32 to uapi/linux/elf-em.h m68k: define syscall_get_arch() hexagon: define syscall_get_arch() Move EM_HEXAGON to uapi/linux/elf-em.h h8300: define syscall_get_arch() c6x: define syscall_get_arch() arc: define syscall_get_arch() Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h audit: Make audit_log_cap and audit_copy_inode static audit: connect LOGIN record to its syscall record ...
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-05-06Merge branch 'linus' of ↵Linus Torvalds1-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for AEAD in simd - Add fuzz testing to testmgr - Add panic_on_fail module parameter to testmgr - Use per-CPU struct instead multiple variables in scompress - Change verify API for akcipher Algorithms: - Convert x86 AEAD algorithms over to simd - Forbid 2-key 3DES in FIPS mode - Add EC-RDSA (GOST 34.10) algorithm Drivers: - Set output IV with ctr-aes in crypto4xx - Set output IV in rockchip - Fix potential length overflow with hashing in sun4i-ss - Fix computation error with ctr in vmx - Add SM4 protected keys support in ccree - Remove long-broken mxc-scc driver - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits) crypto: ccree - use a proper le32 type for le32 val crypto: ccree - remove set but not used variable 'du_size' crypto: ccree - Make cc_sec_disable static crypto: ccree - fix spelling mistake "protedcted" -> "protected" crypto: caam/qi2 - generate hash keys in-place crypto: caam/qi2 - fix DMA mapping of stack memory crypto: caam/qi2 - fix zero-length buffer DMA mapping crypto: stm32/cryp - update to return iv_out crypto: stm32/cryp - remove request mutex protection crypto: stm32/cryp - add weak key check for DES crypto: atmel - remove set but not used variable 'alg_name' crypto: picoxcell - Use dev_get_drvdata() crypto: crypto4xx - get rid of redundant using_sd variable crypto: crypto4xx - use sync skcipher for fallback crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues crypto: crypto4xx - fix ctr-aes missing output IV crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o crypto: ccree - handle tee fips error during power management resume crypto: ccree - add function to handle cryptocell tee fips error ...
2019-05-06Merge tag 'arm64-mmiowb' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...
2019-05-06Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Here are the locking changes in this cycle: - rwsem unification and simpler micro-optimizations to prepare for more intrusive (and more lucrative) scalability improvements in v5.3 (Waiman Long) - Lockdep irq state tracking flag usage cleanups (Frederic Weisbecker) - static key improvements (Jakub Kicinski, Peter Zijlstra) - misc updates, cleanups and smaller fixes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) locking/lockdep: Remove unnecessary unlikely() locking/static_key: Don't take sleeping locks in __static_key_slow_dec_deferred() locking/static_key: Factor out the fast path of static_key_slow_dec() locking/static_key: Add support for deferred static branches locking/lockdep: Test all incompatible scenarios at once in check_irq_usage() locking/lockdep: Avoid bogus Clang warning locking/lockdep: Generate LOCKF_ bit composites locking/lockdep: Use expanded masks on find_usage_*() functions locking/lockdep: Map remaining magic numbers to lock usage mask names locking/lockdep: Move valid_state() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING locking/rwsem: Prevent unneeded warning during locking selftest locking/rwsem: Optimize rwsem structure for uncontended lock acquisition locking/rwsem: Enable lock event counting locking/lock_events: Don't show pvqspinlock events on bare metal locking/lock_events: Make lock_events available for all archs & other locks locking/qspinlock_stat: Introduce generic lockevent_*() counting APIs locking/rwsem: Enhance DEBUG_RWSEMS_WARN_ON() macro locking/rwsem: Add debug check for __down_read*() locking/rwsem: Micro-optimize rwsem_try_read_lock_unqueued() locking/rwsem: Move rwsem internal function declarations to rwsem-xadd.h ...
2019-05-06Merge branch 'core-mm-for-linus' of ↵Linus Torvalds2-18/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull unified TLB flushing from Ingo Molnar: "This contains the generic mmu_gather feature from Peter Zijlstra, which is an all-arch unification of TLB flushing APIs, via the following (broad) steps: - enhance the <asm-generic/tlb.h> APIs to cover more arch details - convert most TLB flushing arch implementations to the generic <asm-generic/tlb.h> APIs. - remove leftovers of per arch implementations After this series every single architecture makes use of the unified TLB flushing APIs" * 'core-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm/resource: Use resource_overlaps() to simplify region_intersects() ia64/tlb: Eradicate tlb_migrate_finish() callback asm-generic/tlb: Remove tlb_table_flush() asm-generic/tlb: Remove tlb_flush_mmu_free() asm-generic/tlb: Remove CONFIG_HAVE_GENERIC_MMU_GATHER asm-generic/tlb: Remove arch_tlb*_mmu() s390/tlb: Convert to generic mmu_gather asm-generic/tlb: Introduce CONFIG_HAVE_MMU_GATHER_NO_GATHER=y arch/tlb: Clean up simple architectures um/tlb: Convert to generic mmu_gather sh/tlb: Convert SH to generic mmu_gather ia64/tlb: Convert to generic mmu_gather arm/tlb: Convert to generic mmu_gather asm-generic/tlb, arch: Invert CONFIG_HAVE_RCU_TABLE_INVALIDATE asm-generic/tlb, ia64: Conditionally provide tlb_migrate_finish() asm-generic/tlb: Provide generic tlb_flush() based on flush_tlb_mm() asm-generic/tlb, arch: Provide generic tlb_flush() based on flush_tlb_range() asm-generic/tlb, arch: Provide generic VIPT cache flush asm-generic/tlb, arch: Provide CONFIG_HAVE_MMU_GATHER_PAGE_SIZE asm-generic/tlb: Provide a comment
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <[email protected]>
2019-04-23Merge tag 'syscalls-5.1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull syscall numbering updates from Arnd Bergmann: "arch: add pidfd and io_uring syscalls everywhere This comes a bit late, but should be in 5.1 anyway: we want the newly added system calls to be synchronized across all architectures in the release. I hope that in the future, any newly added system calls can be added to all architectures at the same time, and tested there while they are in linux-next, avoiding dependencies between the architecture maintainer trees and the tree that contains the new system call" * tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: add pidfd and io_uring syscalls everywhere
2019-04-19asm-generic: generalize asm/sockios.hArnd Bergmann1-15/+0
ia64, parisc and sparc just use a copy of the generic version of asm/sockios.h, and x86 is a redirect to the same file, so we can just let the header file be generated. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18crypto: sparc - Forbid 2-key 3DES in FIPS modeHerbert Xu1-7/+4
This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode. Signed-off-by: Herbert Xu <[email protected]>
2019-04-15arch: add pidfd and io_uring syscalls everywhereArnd Bergmann1-0/+4
Add the io_uring and pidfd_send_signal system calls to all architectures. These system calls are designed to handle both native and compat tasks, so all entries are the same across architectures, only arm-compat and the generic tale still use an old format. Acked-by: Michael Ellerman <[email protected]> (powerpc) Acked-by: Heiko Carstens <[email protected]> (s390) Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2019-04-10sparc64/pci_sun4v: fix ATU checks for large DMA masksChristoph Hellwig1-9/+11
Now that we allow drivers to always need to set larger than required DMA masks we need to be a little more careful in the sun4v PCI iommu driver to chose when to select the ATU support - a larger DMA mask can be set even when the platform does not support ATU, so we always have to check if it is avaiable before using it. Add a little helper for that and use it in all the places where we make ATU usage decisions based on the DMA mask. Fixes: 24132a419c68 ("sparc64/pci_sun4v: allow large DMA masks") Reported-by: Meelis Roos <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Tested-by: Meelis Roos <[email protected]> Acked-by: David S. Miller <[email protected]>
2019-04-10Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar1-6/+5
Signed-off-by: Ingo Molnar <[email protected]>
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus1-1/+1
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/[email protected] Cc: Andy Shevchenko <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sakari Ailus <[email protected]> Acked-by: David Sterba <[email protected]> (for btrfs) Acked-by: Mike Rapoport <[email protected]> (for mm/memblock.c) Acked-by: Bjorn Helgaas <[email protected]> (for drivers/pci) Acked-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Petr Mladek <[email protected]>
2019-04-08arch: Remove dummy mmiowb() definitions from arch codeWill Deacon1-2/+0
Now that no driver code is using mmiowb() directly, remove the dummy definitions remaining in architectures that don't make use of asm-generic/io.h, as well as the definition in asm-generic/io.h itself. Acked-by: Linus Torvalds <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-04-08arch: Use asm-generic header for asm/mmiowb.hWill Deacon1-0/+1
Hook up asm-generic/mmiowb.h to Kbuild for all architectures so that we can subsequently include asm/mmiowb.h from core code. Cc: Masahiro Yamada <[email protected]> Cc: Arnd Bergmann <[email protected]> Acked-by: Linus Torvalds <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-04-05syscalls: Remove start and number from syscall_set_arguments() argsSteven Rostedt (VMware)1-4/+3
After removing the start and count arguments of syscall_get_arguments() it seems reasonable to remove them from syscall_set_arguments(). Note, as of today, there are no users of syscall_set_arguments(). But we are told that there will be soon. But for now, at least make it consistent with syscall_get_arguments(). Link: http://lkml.kernel.org/r/[email protected] Cc: Oleg Nesterov <[email protected]> Cc: Kees Cook <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: Dave Martin <[email protected]> Cc: "Dmitry V. Levin" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Max Filippov <[email protected]> # For xtensa changes Acked-by: Will Deacon <[email protected]> # For the arm64 bits Reviewed-by: Thomas Gleixner <[email protected]> # for x86 Reviewed-by: Dmitry V. Levin <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2019-04-05syscalls: Remove start and number from syscall_get_arguments() argsSteven Rostedt (Red Hat)1-2/+2
At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/[email protected] Cc: Oleg Nesterov <[email protected]> Cc: Kees Cook <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: Dave Martin <[email protected]> Cc: "Dmitry V. Levin" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Paul Burton <[email protected]> # MIPS parts Acked-by: Max Filippov <[email protected]> # For xtensa changes Acked-by: Will Deacon <[email protected]> # For the arm64 bits Reviewed-by: Thomas Gleixner <[email protected]> # for x86 Reviewed-by: Dmitry V. Levin <[email protected]> Reported-by: Andy Lutomirski <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2019-04-03locking/rwsem: Remove rwsem-spinlock.c & use rwsem-xadd.c for all archsWaiman Long1-8/+0
Currently, we have two different implementation of rwsem: 1) CONFIG_RWSEM_GENERIC_SPINLOCK (rwsem-spinlock.c) 2) CONFIG_RWSEM_XCHGADD_ALGORITHM (rwsem-xadd.c) As we are going to use a single generic implementation for rwsem-xadd.c and no architecture-specific code will be needed, there is no point in keeping two different implementations of rwsem. In most cases, the performance of rwsem-spinlock.c will be worse. It also doesn't get all the performance tuning and optimizations that had been implemented in rwsem-xadd.c over the years. For simplication, we are going to remove rwsem-spinlock.c and make all architectures use a single implementation of rwsem - rwsem-xadd.c. All references to RWSEM_GENERIC_SPINLOCK and RWSEM_XCHGADD_ALGORITHM in the code are removed. Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Linus Torvalds <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tim Chen <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-04-03locking/rwsem: Remove arch specific rwsem filesWaiman Long1-1/+0
As the generic rwsem-xadd code is using the appropriate acquire and release versions of the atomic operations, the arch specific rwsem.h files will not be that much faster than the generic code as long as the atomic functions are properly implemented. So we can remove those arch specific rwsem.h and stop building asm/rwsem.h to reduce maintenance effort. Currently, only x86, alpha and ia64 have implemented architecture specific fast paths. I don't have access to alpha and ia64 systems for testing, but they are legacy systems that are not likely to be updated to the latest kernel anyway. By using a rwsem microbenchmark, the total locking rates on a 4-socket 56-core 112-thread x86-64 system before and after the patch were as follows (mixed means equal # of read and write locks): Before Patch After Patch # of Threads wlock rlock mixed wlock rlock mixed ------------ ----- ----- ----- ----- ----- ----- 1 29,201 30,143 29,458 28,615 30,172 29,201 2 6,807 13,299 1,171 7,725 15,025 1,804 4 6,504 12,755 1,520 7,127 14,286 1,345 8 6,762 13,412 764 6,826 13,652 726 16 6,693 15,408 662 6,599 15,938 626 32 6,145 15,286 496 5,549 15,487 511 64 5,812 15,495 60 5,858 15,572 60 There were some run-to-run variations for the multi-thread tests. For x86-64, using the generic C code fast path seems to be a little bit faster than the assembly version with low lock contention. Looking at the assembly version of the fast paths, there are assembly to/from C code wrappers that save and restore all the callee-clobbered registers (7 registers on x86-64). The assembly generated from the generic C code doesn't need to do that. That may explain the slight performance gain here. The generic asm rwsem.h can also be merged into kernel/locking/rwsem.h with no code change as no other code other than those under kernel/locking needs to access the internal rwsem macros and functions. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Linus Torvalds <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tim Chen <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-04-03arch/tlb: Clean up simple architecturesPeter Zijlstra1-13/+0
For the architectures that do not implement their own tlb_flush() but do already use the generic mmu_gather, there are two options: 1) the platform has an efficient flush_tlb_range() and asm-generic/tlb.h doesn't need any overrides at all. 2) the platform lacks an efficient flush_tlb_range() and we select MMU_GATHER_NO_RANGE to minimize full invalidates. Convert all 'simple' architectures to one of these two forms. alpha: has no range invalidate -> 2 arc: already used flush_tlb_range() -> 1 c6x: has no range invalidate -> 2 hexagon: has an efficient flush_tlb_range() -> 1 (flush_tlb_mm() is in fact a full range invalidate, so no need to shoot down everything) m68k: has inefficient flush_tlb_range() -> 2 microblaze: has no flush_tlb_range() -> 2 mips: has efficient flush_tlb_range() -> 1 (even though it currently seems to use flush_tlb_mm()) nds32: already uses flush_tlb_range() -> 1 nios2: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) openrisc: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) parisc: already uses flush_tlb_range() -> 1 sparc32: already uses flush_tlb_range() -> 1 unicore32: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) xtensa: has efficient flush_tlb_range() -> 1 Note this also fixes a bug in the existing code for a number platforms. Those platforms that did: tlb_end_vma() -> if (!full_mm) flush_tlb_*() tlb_flush -> if (full_mm) flush_tlb_mm() missed the case of shift_arg_pages(), which doesn't have @fullmm set, nor calls into tlb_*vma(), but still frees page-tables and thus needs an invalidate. The new code handles this by detecting a non-empty range, and either issuing the matching range invalidate or a full invalidate, depending on the capabilities. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Aneesh Kumar K.V <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dave Hansen <[email protected]> Cc: David S. Miller <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Helge Deller <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mark Salter <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Piggin <[email protected]> Cc: Paul Burton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-04-03asm-generic/tlb, arch: Invert CONFIG_HAVE_RCU_TABLE_INVALIDATEPeter Zijlstra1-0/+1
Make issuing a TLB invalidate for page-table pages the normal case. The reason is twofold: - too many invalidates is safer than too few, - most architectures use the linux page-tables natively and would thus require this. Make it an opt-out, instead of an opt-in. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dave Hansen <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-04-03asm-generic/tlb, arch: Provide generic VIPT cache flushPeter Zijlstra1-5/+0
The one obvious thing SH and ARM want is a sensible default for tlb_start_vma(). (also: https://lkml.org/lkml/2004/1/15/6 ) Avoid all VIPT architectures providing their own tlb_start_vma() implementation and rely on architectures to provide a no-op flush_cache_range() when it is not relevant. This patch makes tlb_start_vma() default to flush_cache_range(), which should be right and sufficient. The only exceptions that I found where (oddly): - m68k-mmu - sparc64 - unicore Those architectures appear to have flush_cache_range(), but their current tlb_start_vma() does not call it. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Aneesh Kumar K.V <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dave Hansen <[email protected]> Cc: David Miller <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Nick Piggin <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-03-28KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supportedMasahiro Yamada2-2/+1
I do not see any consistency about headers_install of <linux/kvm_para.h> and <asm/kvm_para.h>. According to my analysis of Linux 5.1-rc1, there are 3 groups: [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported alpha, arm, hexagon, mips, powerpc, s390, sparc, x86 [2] <asm/kvm_para.h> is exported, but <linux/kvm_para.h> is not arc, arm64, c6x, h8300, ia64, m68k, microblaze, nios2, openrisc, parisc, sh, unicore32, xtensa [3] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported csky, nds32, riscv This does not match to the actual KVM support. At least, [2] is half-baked. Nor do arch maintainers look like they care about this. For example, commit 0add53713b1c ("microblaze: Add missing kvm_para.h to Kbuild") exported <asm/kvm_para.h> to user-space in order to fix an in-kernel build error. We have two ways to make this consistent: [A] export both <linux/kvm_para.h> and <asm/kvm_para.h> for all architectures, irrespective of the KVM support [B] Match the header export of <linux/kvm_para.h> and <asm/kvm_para.h> to the KVM support My first attempt was [A] because the code looks cleaner, but Paolo suggested [B]. So, this commit goes with [B]. For most architectures, <asm/kvm_para.h> was moved to the kernel-space. I changed include/uapi/linux/Kbuild so that it checks generated asm/kvm_para.h as well as check-in ones. After this commit, there will be two groups: [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported arm, arm64, mips, powerpc, s390, x86 [2] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported alpha, arc, c6x, csky, h8300, hexagon, ia64, m68k, microblaze, nds32, nios2, openrisc, parisc, riscv, sh, sparc, unicore32, xtensa Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Cornelia Huck <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-03-20syscall_get_arch: add "struct task_struct *" argumentDmitry V. Levin1-2/+3
This argument is required to extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request: syscall_get_arch() is going to be called from ptrace_request() along with syscall_get_nr(), syscall_get_arguments(), syscall_get_error(), and syscall_get_return_value() functions with a tracee as their argument. The primary intent is that the triple (audit_arch, syscall_nr, arg1..arg6) should describe what system call is being called and what its arguments are. Reverts: 5e937a9ae913 ("syscall_get_arch: remove useless function arguments") Reverts: 1002d94d3076 ("syscall.h: fix doc text for syscall_get_arch()") Reviewed-by: Andy Lutomirski <[email protected]> # for x86 Reviewed-by: Palmer Dabbelt <[email protected]> Acked-by: Paul Moore <[email protected]> Acked-by: Paul Burton <[email protected]> # MIPS parts Acked-by: Michael Ellerman <[email protected]> (powerpc) Acked-by: Kees Cook <[email protected]> # seccomp parts Acked-by: Mark Salter <[email protected]> # for the c6x bit Cc: Elvira Khabirova <[email protected]> Cc: Eugene Syromyatnikov <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Dmitry V. Levin <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2019-03-17Merge tag 'kbuild-v5.1-2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada1-2/+0
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <[email protected]>
2019-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: "More fixes in the queue: 1) Netfilter nat can erroneously register the device notifier twice, fix from Florian Westphal. 2) Use after free in nf_tables, from Pablo Neira Ayuso. 3) Parallel update of steering rule fix in mlx5 river, from Eli Britstein. 4) RX processing panic in lan743x, fix from Bryan Whitehead. 5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch. 6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein. 7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing modes, from Bryan Whitehead. 8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) pptp: dst_release sk_dst_cache in pptp_sock_destruct MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list l2tp: fix infoleak in l2tp_ip6_recvmsg() net/tls: Inform user space about send buffer availability net_sched: return correct value for *notify* functions lan743x: Fix TX Stall Issue net/mlx4_core: Fix qp mtt size calculation net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling net/mlx4_core: Fix reset flow when in command polling mode mlxsw: minimal: Initialize base_mac mlxsw: core: Prevent duplication during QSFP module initialization net: dwmac-sun8i: fix a missing check of of_get_phy_mode net: sh_eth: fix a missing check of of_get_phy_mode net: 8390: fix potential NULL pointer dereferences net: fujitsu: fix a potential NULL pointer dereference net: qlogic: fix a potential NULL pointer dereference isdn: hfcpci: fix potential NULL pointer dereference Documentation: devicetree: add a new optional property for port mac address net: rocker: fix a potential NULL pointer dereference net: qlge: fix a potential NULL pointer dereference ...
2019-03-12sparc: add checks for the return value of memblock_alloc*()Mike Rapoport5-0/+39
Add panic() calls if memblock_alloc*() returns NULL. Most of the changes are simply addition of if(!ptr) panic(); statements after the calls to memblock_alloc*() variants. Exceptions are pcpu_populate_pte() and kernel_map_range() that were slightly refactored to accommodate the change. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Acked-by: David S. Miller <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Dennis Zhou <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Guo Ren <[email protected]> [c-sky] Cc: Heiko Carstens <[email protected]> Cc: Juergen Gross <[email protected]> [Xen] Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Paul Burton <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Rob Herring <[email protected]> Cc: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-03-12arch: don't memset(0) memory returned by memblock_alloc()Mike Rapoport1-2/+0
memblock_alloc() already clears the allocated memory, no point in doing it twice. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> [m68k] Cc: Catalin Marinas <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Dennis Zhou <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Guo Ren <[email protected]> [c-sky] Cc: Heiko Carstens <[email protected]> Cc: Juergen Gross <[email protected]> [Xen] Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Paul Burton <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Rob Herring <[email protected]> Cc: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-03-12arch: use memblock_alloc() instead of memblock_alloc_from(size, align, 0)Mike Rapoport3-7/+7
The last parameter of memblock_alloc_from() is the lower limit for the memory allocation. When it is 0, the call is equivalent to memblock_alloc(). Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Acked-by: Paul Burton <[email protected]> # MIPS part Cc: Catalin Marinas <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Dennis Zhou <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Guo Ren <[email protected]> [c-sky] Cc: Heiko Carstens <[email protected]> Cc: Juergen Gross <[email protected]> [Xen] Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Rob Herring <[email protected]> Cc: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-03-11y2038: fix socket.h header inclusionArnd Bergmann1-1/+1
Referencing the __kernel_long_t type caused some user space applications to stop compiling when they had not already included linux/posix_types.h, e.g. s/multicast.c -o ext/sockets/multicast.lo In file included from /builddir/build/BUILD/php-7.3.3/main/php.h:468, from /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:27: /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c: In function 'zm_startup_sockets': /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:776:40: error: '__kernel_long_t' undeclared (first use in this function) 776 | REGISTER_LONG_CONSTANT("SO_SNDTIMEO", SO_SNDTIMEO, CONST_CS | CONST_PERSISTENT); It is safe to include that header here, since it only contains kernel internal types that do not conflict with other user space types. It's still possible that some related build failures remain, but those are likely to be for code that is not already y2038 safe. Reported-by: Laura Abbott <[email protected]> Fixes: a9beb86ae6e5 ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds4-52/+31
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-07arch: simplify several early memory allocationsMike Rapoport2-11/+5
There are several early memory allocations in arch/ code that use memblock_phys_alloc() to allocate memory, convert the returned physical address to the virtual address and then set the allocated memory to zero. Exactly the same behaviour can be achieved simply by calling memblock_alloc(): it allocates the memory in the same way as memblock_phys_alloc(), then it performs the phys_to_virt() conversion and clears the allocated memory. Replace the longer sequence with a simpler call to memblock_alloc(). Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Michal Simek <[email protected]> Cc: Michal Simek <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Stefan Kristiansson <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-03-07configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATEDAlexey Brodkin2-2/+0
This Kconfig option was removed during v4.19 development in commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely and for good") so there's no point to keep it in defconfigs any longer. FWIW defconfigs were patched with: --------------------------->8---------------------- find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \; --------------------------->8---------------------- Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Alexey Brodkin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.