| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "Clean up hugetlb boot command line processing", v4.
Longpeng(Mike) reported a weird message from hugetlb command line
processing and proposed a solution [1]. While the proposed patch does
address the specific issue, there are other related issues in command line
processing. As hugetlbfs evolved, updates to command line processing have
been made to meet immediate needs and not necessarily in a coordinated
manner. The result is that some processing is done in arch specific code,
some is done in arch independent code and coordination is problematic.
Semantics can vary between architectures.
The patch series does the following:
- Define arch specific arch_hugetlb_valid_size routine used to validate
passed huge page sizes.
- Move hugepagesz= command line parsing out of arch specific code and into
an arch independent routine.
- Clean up command line processing to follow desired semantics and
document those semantics.
[1] https://lore.kernel.org/linux-mm/[email protected]
This patch (of 3):
The architecture independent routine hugetlb_default_setup sets up the
default huge pages size. It has no way to verify if the passed value is
valid, so it accepts it and attempts to validate at a later time. This
requires undocumented cooperation between the arch specific and arch
independent code.
For architectures that support more than one huge page size, provide a
routine arch_hugetlb_valid_size to validate a huge page size.
hugetlb_default_setup can use this to validate passed values.
arch_hugetlb_valid_size will also be used in a subsequent patch to move
processing of the "hugepagesz=" in arch specific code to a common routine
in arch independent code.
Signed-off-by: Mike Kravetz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Gerald Schaefer <[email protected]> [s390]
Acked-by: Will Deacon <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Longpeng <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Mina Almasry <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Nitesh Narayan Lal <[email protected]>
Cc: Anders Roxell <[email protected]>
Cc: "Aneesh Kumar K.V" <[email protected]>
Cc: Qian Cai <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The memmap_init() function was made to iterate over memblock regions and
as the result the early_pfn_in_nid() function became obsolete. Since
CONFIG_NODES_SPAN_OTHER_NODES is only used to pick a stub or a real
implementation of early_pfn_in_nid(), it is also not needed anymore.
Remove both early_pfn_in_nid() and the CONFIG_NODES_SPAN_OTHER_NODES.
Co-developed-by: Hoan Tran <[email protected]>
Signed-off-by: Hoan Tran <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Hoan Tran <[email protected]> [arm64]
Cc: Baoquan He <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
free_area_init() only requires the definition of maximal PFN for each of
the supported zone rater than calculation of actual zone sizes and the
sizes of the holes between the zones.
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP the free_area_init() is
available to all architectures.
Using this function instead of free_area_init_node() simplifies the zone
detection.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Hoan Tran <[email protected]> [arm64]
Cc: Baoquan He <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
free_area_init() has effectively became a wrapper for
free_area_init_nodes() and there is no point of keeping it. Still
free_area_init() name is shorter and more general as it does not imply
necessity to initialize multiple nodes.
Rename free_area_init_nodes() to free_area_init(), update the callers and
drop old version of free_area_init().
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Hoan Tran <[email protected]> [arm64]
Reviewed-by: Baoquan He <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of
nodes and zones structures between the systems that have region to node
mapping in memblock and those that don't.
Currently all the NUMA architectures enable this option and for the
non-NUMA systems we can presume that all the memory belongs to node 0 and
therefore the compile time configuration option is not required.
The remaining few architectures that use DISCONTIGMEM without NUMA are
easily updated to use memblock_add_node() instead of memblock_add() and
thus have proper correspondence of memblock regions to NUMA nodes.
Still, free_area_init_node() must have a backward compatible version
because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is
different. Once all the architectures will use the new semantics, the
entire compatibility layer can be dropped.
To avoid addition of extra run time memory to store node id for
architectures that keep memblock but have only a single node, the node id
field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and
the corresponding accessors presume that in those cases it is always 0.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Hoan Tran <[email protected]> [arm64]
Acked-by: Catalin Marinas <[email protected]> [arm64]
Cc: Baoquan He <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Some ptrace fixes from Al.
Signed-off-by: David S. Miller <[email protected]>
|
|
The SRMMU page-table allocator allocates multiple PTE tables per page,
since they are only 1K in size. However, this means that calls to
pgtable_pte_page_{ctor,dtor}() must be serialised and performed only by
the first and last page-table allocation for the page respectively.
Use the page reference count to track how many PTE tables we have
allocated for a given page returned by the SRMMU allocator and only
call the ctor()/dtor() functions for the first and last user respectively.
Cc: David S. Miller <[email protected]>
Fixes: 8c8f3156dd40 ("sparc32: mm: Reduce allocation size for PMD and PTE tables")
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The pages backing page-table allocations for SRMMU are allocated via
memblock as part of the "nocache" region initialisation during
srmmu_paging_init() and should not be freed even if a later call to
pgtable_pte_page_ctor() fails.
Remove the broken call to __free_page().
Cc: David S. Miller <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Fixes: 1ae9ae5f7df7 ("sparc: handle pgtable_page_ctor() fail")
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
sparc32 never registered the memory occupied by the kernel image with
memblock_add() and it only reserved this memory with meblock_reserve().
With openbios as system firmware, the memory occupied by the kernel is
reserved in openbios and removed from mem.available. The prom setup code in
the kernel uses mem.available to set up the memory banks and essentially
there is a hole for the memory occupied by the kernel image.
Later in bootmem_init() this memory is memblock_reserve()d.
Up until recently, memmap initialization would call __init_single_page()
for the pages in that hole, the free_low_memory_core_early() would mark
them as reserved and everything would be Ok.
After the change in memmap initialization introduced by the commit "mm:
memmap_init: iterate over memblock regions rather that check each PFN", the
hole is skipped and the page structs for it are not initialized. And when
they are passed from memblock to page allocator as reserved, the latter
gets confused.
Simply registering the memory occupied by the kernel with memblock_add()
resolves this issue.
Tested on qemu-system-sparc with Debian Etch [1] userspace.
[1] https://people.debian.org/~aurel32/qemu/sparc/debian_etch_sparc_small.qcow2
Signed-off-by: Mike Rapoport <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]/
Acked-by: David S. Miller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove unused header file linux/nfs_fs.h
Signed-off-by: Anupam Aggarwal <[email protected]>
Signed-off-by: Vivek Trivedi <[email protected]>
Signed-off-by: Amit Sahrawat <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"Assorted patches from Miklos.
An interesting part here is /proc/mounts stuff..."
The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.
Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).
* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add faccessat2 syscall
vfs: don't parse "silent" option
vfs: don't parse "posixacl" option
vfs: don't parse forbidden flags
statx: add mount_root
statx: add mount ID
statx: don't clear STATX_ATIME on SB_RDONLY
uapi: deprecate STATX_ALL
utimensat: AT_EMPTY_PATH support
vfs: split out access_override_creds()
proc/mounts: add cursor
aio: fix async fsync creds
vfs: allow unprivileged whiteout creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess/csum updates from Al Viro:
"Regularize the sitation with uaccess checksum primitives:
- fold csum_partial_... into csum_and_copy_..._user()
- on x86 collapse several access_ok()/stac()/clac() into
user_access_begin()/user_access_end()"
* 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
default csum_and_copy_to_user(): don't bother with access_ok()
take the dummy csum_and_copy_from_user() into net/checksum.h
arm: switch to csum_and_copy_from_user()
sh32: convert to csum_and_copy_from_user()
m68k: convert to csum_and_copy_from_user()
xtensa: switch to providing csum_and_copy_from_user()
sparc: switch to providing csum_and_copy_from_user()
parisc: turn csum_partial_copy_from_user() into csum_and_copy_from_user()
alpha: turn csum_partial_copy_from_user() into csum_and_copy_from_user()
ia64: turn csum_partial_copy_from_user() into csum_and_copy_from_user()
ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user()
x86: switch 32bit csum_and_copy_to_user() to user_access_{begin,end}()
x86: switch both 32bit and 64bit to providing csum_and_copy_from_user()
x86_64: csum_..._copy_..._user(): switch to unsafe_..._user()
get rid of csum_partial_copy_to_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
|
|
sparc64 already is equivalent to that (trivial access_ok());
add it into sparc32 csum_partial_copy_from_user() and we can
rename both to csum_and_copy_fromUser() and be done with that.
Signed-off-by: Al Viro <[email protected]>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The srmmu_nocache_init() uses __nocache_fix() macro to add an offset to
page table entry to access srmmu_nocache_pool.
But since sparc32 has only three actual page table levels, pgd, p4d and
pud are essentially the same thing and pgd_offset() and p4d_offset() are
no-ops, the __nocache_fix() should be done only at PUD level.
Remove __nocache_fix() for p4d_offset() and pud_offset() and keep it
only for PUD and lower levels.
Fixes: c2bc26f7ca1f ("sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()")
Signed-off-by: Mike Rapoport <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Anatoly Pugachev <[email protected]>
Cc: <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kbuild test robot reported the following warning:
arch/sparc/mm/srmmu.c: In function 'srmmu_nocache_init': arch/sparc/mm/srmmu.c:300:9: error: variable 'pud' set but not used [-Werror=unused-but-set-variable]
300 | pud_t *pud;
This warning is caused by misprint in the page table traversal in
srmmu_nocache_init() function which accessed a PMD entry using PGD
rather than PUD.
Since sparc32 has only 3 page table levels, the PGD and PUD are
essentially the same and usage of __nocache_fix() removed the type
checking.
Use PUD for the consistency and to silence the compiler warning.
Fixes: 7235db268a2777bc38 ("sparc32: use pgtable-nopud instead of 4level-fixup")
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Anatoly Pugachev <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
It needs access_process_vm() if the traced process does not share
mm with the caller. Solution is similar to what sparc64 does.
Note that genregs32_set() is only ever called with pos being 0
or 32 * sizeof(u32) (the latter - as part of PTRACE_SETREGS
handling).
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
|
|
We do need access_process_vm() to access the target's reg_window.
However, access to caller's memory (storing the result in
genregs32_get(), fetching the new values in case of genregs32_set())
should be done by normal uaccess primitives.
Fixes: ad4f95764040 ([SPARC64]: Fix user accesses in regset code.)
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
|
|
With earlier commits, the API no longer discards the const-ness of the
sysrq_key_op. As such we can add the notation.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Emil Velikov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
POSIX defines faccessat() as having a fourth "flags" argument, while the
linux syscall doesn't have it. Glibc tries to emulate AT_EACCESS and
AT_SYMLINK_NOFOLLOW, but AT_EACCESS emulation is broken.
Add a new faccessat(2) syscall with the added flags argument and implement
both flags.
The value of AT_EACCESS is defined in glibc headers to be the same as
AT_REMOVEDIR. Use this value for the kernel interface as well, together
with the explanatory comment.
Also add AT_EMPTY_PATH support, which is not documented by POSIX, but can
be useful and is trivial to implement.
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
snprintf() returns the number of bytes that would be written,
which may be greater than the the actual length to be written.
show_pciobppath_attr() should return the number of bytes printed
into the buffer. This is the return value of scnprintf().
Signed-off-by: Chen Zhou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
snprintf() returns the number of bytes that would be written,
which may be greater than the the actual length to be written.
show_pciobppath_attr() should return the number of bytes printed
into the buffer. This is the return value of scnprintf().
Signed-off-by: Chen Zhou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now that the page table allocator can free page table allocations
smaller than PAGE_SIZE, reduce the size of the PMD and PTE allocations
to avoid needlessly wasting memory.
Cc: "David S. Miller" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Change the 'pgtable_t' type for sparc32 so that it represents the uncached
virtual address of the PTE table, rather than the underlying 'struct page'.
This allows us to free page table allocations smaller than a page.
Cc: "David S. Miller" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The "SRMMU" supports 4k pages using a fixed three-level walk with a
256-entry PGD and 64-entry PMD/PTE levels. In order to fill a page
with a 'pgtable_t', the SRMMU code allocates four native PTE tables
into a single PTE allocation and similarly for the PMD level, leading
to an array of 16 physical pointers in a 'pmd_t'
This breaks the generic code which assumes READ_ONCE(*pmd) will be
word sized.
In a manner similar to ef22d8abd876 ("m68k: mm: Restructure Motorola
MMU page-table layout"), this patch implements the native page-table
setup directly. This significantly increases the page-table memory
overhead, but will be addresses in a subsequent patch.
Cc: "David S. Miller" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The 'size' argument to __srmmu_get_nocache() is a number of bytes not
a shift value, so fix up the sanity checking to treat it properly.
Cc: "David S. Miller" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now by splitting the base address from the register index we can
use the symbolic register names instead of the hard-coded numeric
values.
Link: https://lore.kernel.org/r/[email protected]
Cc: "David S. Miller" <[email protected]>
[willy: fix printk warnings s/%lx/%x/g in sun_82077_fd_{inb,outb}()]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
|
|
The sparc port used to be forced to rely on numeric register indexes
with their equivalent in comments. Now that they don't depend on the
IO port we can use their symbolic names.
Link: https://lore.kernel.org/r/[email protected]
Cc: "David S. Miller" <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
|
|
Currently we have architecture-specific fd_inb() and fd_outb() functions
or macros, taking just a port which is in fact made of a base address and
a register. The base address is FDC-specific and derived from the local or
global "fdc" variable through the FD_IOPORT macro used in the base address
calculation.
This change splits this by explicitly passing the FDC's base address and
the register separately to fd_outb() and fd_inb(). It affects the
following archs:
- x86, alpha, mips, powerpc, parisc, arm, m68k:
simple remap of port -> base+reg
- sparc32: use of reg only, since the base address was already masked
out and the FDC controller is known from a static struct.
- sparc64: like x86 for PCI, like sparc32 for 82077
Some archs use inline functions and others macros. This was not
unified in order to minimize the number of changes to review. For the
same reason checkpatch still spews a few warnings about things that
were already there before.
The parisc still uses hard-coded register values and could be cleaned up
by taking the register definitions.
The sparc per-controller inb/outb functions could further be refined
to explicitly take an FDC register instead of a port in argument but it
was not needed yet and may be cleaned later.
Link: https://lore.kernel.org/r/[email protected]
Cc: Ivan Kokshaysky <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Ian Molton <[email protected]>
Cc: Russell King <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
|
|
<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Most files that include this header don't actually need it. So in
preparation for removing it, remove all these unneeded includes of it.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This function's return type is bool and returns both true/false and 0/1.
This fixes the following coccicheck warning:
arch/sparc/mm/init_64.c:1652:9-10: WARNING: return of 0/1 in function
'kern_addr_valid' with return type bool
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For historical reasons some architectures call their csum_and_copy_to_user()
csum_partial_copy_to_user() instead (and supply a macro defining the
former as the latter). That's the last remnants of old experiment that
went nowhere; time to bury them. Rename those to csum_and_copy_to_user()
and get rid of the macros.
Signed-off-by: Al Viro <[email protected]>
|
|
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.
mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.
[[email protected]: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Guo Ren <[email protected]> [csky]
Acked-by: Geert Uytterhoeven <[email protected]> [m68k]
Acked-by: Stafford Horne <[email protected]> [openrisc]
Acked-by: Helge Deller <[email protected]> [parisc]
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Russell King <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Sam Creasey <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Chris Zankel <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
pte_index() on platforms other than sparc return a numerical index. On
sparc, it returns a pte_t*. This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.
This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
(as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().
[[email protected]: remove pte_entry and just directly modified pte_offset_kernel instead]
Signed-off-by: Arjun Roy <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Cc: David Miller <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Arjun Roy <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Merge more updates from Andrew Morton:
- a lot more of MM, quite a bit more yet to come: (memcg, pagemap,
vmalloc, pagealloc, migration, thp, ksm, madvise, virtio,
userfaultfd, memory-hotplug, shmem, rmap, zswap, zsmalloc, cleanups)
- various other subsystems (procfs, misc, MAINTAINERS, bitops, lib,
checkpatch, epoll, binfmt, kallsyms, reiserfs, kmod, gcov, kconfig,
ubsan, fault-injection, ipc)
* emailed patches from Andrew Morton <[email protected]>: (158 commits)
ipc/shm.c: make compat_ksys_shmctl() static
ipc/mqueue.c: fix a brace coding style issue
lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
ubsan: include bug type in report header
kasan: unset panic_on_warn before calling panic()
ubsan: check panic_on_warn
drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks
ubsan: split "bounds" checker from other options
ubsan: add trap instrumentation option
init/Kconfig: clean up ANON_INODES and old IO schedulers options
kernel/gcov/fs.c: replace zero-length array with flexible-array member
gcov: gcc_3_4: replace zero-length array with flexible-array member
gcov: gcc_4_7: replace zero-length array with flexible-array member
kernel/kmod.c: fix a typo "assuems" -> "assumes"
reiserfs: clean up several indentation issues
kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
samples/hw_breakpoint: drop use of kallsyms_lookup_name()
samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
fs/binfmt_elf.c: don't free interpreter's ELF pheaders on common path
fs/binfmt_elf.c: allocate less for static executable
...
|
|
Pull sparc update from David Miller:
"A per-device DMA ops conversion for sparc32 by Chrstioph Hellwig"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc32: use per-device dma_ops
|
|
The code, #undef CONFIG_OPTIMIZE_INLINING, is not working as expected
because <linux/compiler_types.h> is parsed before vclock_gettime.c since
28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct
attributes").
Since then, <linux/compiler_types.h> is included really early by using the
'-include' option. So, you cannot negate the decision of
<linux/compiler_types.h> in this way.
You can confirm it by checking the pre-processed code, like this:
$ make arch/x86/entry/vdso/vdso32/vclock_gettime.i
There is no difference with/without CONFIG_CC_OPTIMIZE_FOR_SIZE.
It is about two years since 28128c61e08e. Nobody has reported a problem
(or, nobody has even noticed the fact that this code is not working).
It is ugly and unreliable to attempt to undefine a CONFIG option from C
files, and anyway the inlining heuristic is up to the compiler.
Just remove the broken code.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Acked-by: Miguel Ojeda <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: David Miller <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Generated files are also checked by sparse that's why add newline to
remove sparse (C=1) warning.
The issue was found on Microblaze and reported like this:
./arch/microblaze/include/generated/uapi/asm/unistd_32.h:438:45: warning:
no newline at end of file
Mips and PowerPC have it already but let's align with style used by m68k.
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Stefan Asserhall <[email protected]>
Acked-by: Max Filippov <[email protected]> (xtensa)
Cc: Arnd Bergmann <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/4d32ab4e1fb2edb691d2e1687e8fb303c09fd023.1581504803.git.michal.simek@xilinx.com
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
sparc32 is the last platform making dynamic decisions in
get_arch_dma_ops based on the bus passed in. Instead set the
iommu dma_ops at iommu probing and propagate them in
of_propagate_archdata, falling back to the NULL ops for the
direct mapping in the Leon or PCI case.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
|
|
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
Suggested-by: Linus Torvalds <[email protected]>
Suggested-by: Andrea Arcangeli <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags. Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.
Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over. With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
For most architectures, we've got a quick path to detect fatal signal
after a handle_mm_fault(). Introduce a helper for that quick path.
It cleans the current codes a bit so we don't need to duplicate the same
check across archs. More importantly, this will be an unified place that
we handle the signal immediately right after an interrupted page fault, so
it'll be much easier for us if we want to change the behavior of handling
signals later on for all the archs.
Note that currently only part of the archs are using this new helper,
because some archs have their own way to handle signals. In the follow up
patches, we'll try to apply this helper to all the rest of archs.
Another note is that the "regs" parameter in the new helper is not used
yet. It'll be used very soon. Now we kept it in this patch only to avoid
touching all the archs again in the follow up patches.
[[email protected]: fix sparse warnings]
Link: http://lkml.kernel.org/r/20200311145921.GD479302@xz-x1
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Change a header to mandatory-y if both of the following are met:
[1] At least one architecture (except um) specifies it as generic-y in
arch/*/include/asm/Kbuild
[2] Every architecture (except um) either has its own implementation
(arch/*/include/asm/*.h) or specifies it as generic-y in
arch/*/include/asm/Kbuild
This commit was generated by the following shell script.
----------------------------------->8-----------------------------------
arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')
tmpfile=$(mktemp)
grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile
find arch -path 'arch/*/include/asm/Kbuild' |
xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
mandatory=yes
for arch in $arches
do
if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
! [ -f arch/$arch/include/asm/$header ]; then
mandatory=no
break
fi
done
if [ "$mandatory" = yes ]; then
echo "mandatory-y += $header" >> $tmpfile
for arch in $arches
do
sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
done
fi
done
sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild
LANG=C sort $tmpfile >> include/asm-generic/Kbuild
----------------------------------->8-----------------------------------
One obvious benefit is the diff stat:
25 files changed, 52 insertions(+), 557 deletions(-)
It is tedious to list generic-y for each arch that needs it.
So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.
See the following commits:
def3f7cefe4e81c296090e1722a76551142c227c
a1b39bae16a62ce4aae02d958224f19316d98b24
It is tedious to convert headers one by one, so I processed by a shell
script.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Build system:
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
Kconfig:
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
files
- relax the 'imply' behavior so that symbols implied by 'y' can
become 'm'
- make 'imply' obey 'depends on' in order to make 'imply' really weak
Misc:
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups"
* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
Makefile: Update kselftest help information
kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
kbuild: add outputmakefile to no-dot-config-targets
kbuild: remove AS variable
net: wan: wanxl: refactor the firmware rebuild rule
net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
kbuild: add comment about grouped target
kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
kconfig: remove unused variable in qconf.cc
sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
kbuild: refactor Makefile.dtbinst more
kbuild: compute the dtbs_install destination more simply
Makefile: disallow data races on gcc-10 as well
kconfig: make 'imply' obey the direct dependency
kconfig: allow symbols implied by y to become m
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
modpost: rework and consolidate logging interface
kbuild: allow to run dt_binding_check without kernel configuration
...
|