| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
just convert compat_sys_{readahead,fadvise64,fadvise64_64} to
COMPAT_SYSCALL_DEFINE
Signed-off-by: Al Viro <[email protected]>
|
|
SYSCALL_DEFINE and COMPAT_SYSCALL_DEFINE already give argument
normalization.
Signed-off-by: Al Viro <[email protected]>
|
|
just use current_pt_regs()
Signed-off-by: Al Viro <[email protected]>
|
|
Commit f8ec66014ffd ("signal: Add send_sig_fault and force_sig_fault")
added new helper functions to streamline signal delivery. This patch
updates signal delivery for new/updated handlers for ADI related
exceptions to use the helper function.
Signed-off-by: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Acked-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ADI is a new feature supported on SPARC M7 and newer processors to allow
hardware to catch rogue accesses to memory. ADI is supported for data
fetches only and not instruction fetches. An app can enable ADI on its
data pages, set version tags on them and use versioned addresses to
access the data pages. Upper bits of the address contain the version
tag. On M7 processors, upper four bits (bits 63-60) contain the version
tag. If a rogue app attempts to access ADI enabled data pages, its
access is blocked and processor generates an exception. Please see
Documentation/sparc/adi.txt for further details.
This patch extends mprotect to enable ADI (TSTATE.mcde), enable/disable
MCD (Memory Corruption Detection) on selected memory ranges, enable
TTE.mcd in PTEs, return ADI parameters to userspace and save/restore ADI
version tags on page swap out/in or migration. ADI is not enabled by
default for any task. A task must explicitly enable ADI on a memory
range and set version tag for ADI to be effective for the task.
Signed-off-by: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ADI feature on M7 and newer processors has three important properties
relevant to userspace apps using ADI capabilities - (1) Size of block of
memory an ADI version tag applies to, (2) Number of uppermost bits in
virtual address used to encode ADI tag, and (3) The value M7 processor
will force the ADI tags to if it detects uncorrectable error in an ADI
tagged cacheline. Kernel can retrieve these properties for a platform
through machine description provided by the firmware. This patch adds
code to retrieve these properties and report them to userspace through
auxiliary vectors.
Signed-off-by: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
M7 and newer processors add a "Memory corruption Detected" trap with
the addition of ADI feature. This trap is vectored into kernel by HV
through resumable error trap with error attribute for the resumable
error set to 0x00000800.
Signed-off-by: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ADI (Application Data Integrity) feature on M7 and newer processors
adds new fault types for hypervisor - Invalid ASI and MCD disabled.
This patch expands data access exception handler to handle these
faults.
Signed-off-by: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
SPARC M7 processor adds new control register fields, ASIs and a new
trap to support the ADI (Application Data Integrity) feature. This
patch adds definitions for these register fields, ASIs and a handler
for the new precise memory corruption detected trap.
Signed-off-by: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Mark noticed that the change to sibling_list changed some iteration
semantics; because previously we used group_list as list entry,
sibling events would always have an empty sibling_list.
But because we now use sibling_list for both list head and list entry,
siblings will report as having siblings.
Fix this with a custom for_each_sibling_event() iterator.
Fixes: 8343aae66167 ("perf/core: Remove perf_event::group_entry")
Reported-by: Mark Rutland <[email protected]>
Suggested-by: Mark Rutland <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
Now that all the grouping is done with RB trees, we no longer need
group_entry and can replace the whole thing with sibling_list.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Carrillo-Cisneros <[email protected]>
Cc: Dmitri Prokhorov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Valery Cherepennikov <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
of ifndef CONFIG_MMU
It allows some architectures to use this generic macro instead of
defining theirs.
sparc: io: To use the define of ioremap_[nocache|wc|wb] in asm-generic/io.h
It will move the ioremap_nocache out of the CONFIG_MMU ifdef. This means that
in order to suppress re-definition errors we need to remove the #define
in arch/sparc/include/asm/io_32.h. Also, the change adds a prototype for
ioremap where size is size_t and offset is phys_addr_t so fix that as well.
Signed-off-by: Greentime Hu <[email protected]>
|
|
Add support for arbitrary bus address offset. Previously we ignored the
child (PCI) address in the "ranges" property and assumed it was always
zero. That means every host bridge window mapped to PCI bus address zero,
e.g.,
pci_bus 0000:00: root bus resource [mem 0x2000000000000-0x200007fffffff] (bus address [0x00000000-0x7fffffff])
But some systems have host bridge windows with non-zero child addresses, so
parse the child address and compute the offset between the parent (CPU) and
child (PCI) addresses. This allows windows like these:
/pci@305: PCI MEM [mem 0x2000000100000-0x200007effffff] offset 2000000000000
pci_sun4v f02ae7f8: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x2000000100000-0x200007effffff] (bus address [0x00100000-0x7effffff])
[bhelgaas: changelog]
Tested-by: Khalid Aziz <[email protected]>
Signed-off-by: Yinghai Lu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: David S. Miller <[email protected]>
Cc: [email protected]
|
|
Pull sparc updates from David Miller:
"Of note is the addition of a driver for the Data Analytics
Accelerator, and some small cleanups"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
oradax: Fix return value check in dax_attach()
sparc: vDSO: remove an extra tab
sparc64: drop unneeded compat include
sparc64: Oracle DAX driver
sparc64: Oracle DAX infrastructure
|
|
The last user of compat_old_sigset_t was removed in commit
2d7d5f05111a9d913131a2764d8b20157f8f758d.
Signed-off-by: Rolf Eike Beer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds hypercall function stubs and C templates for
ccb_submit/info/kill which provide coprocessor services for the Oracle
Data Analytics Accelerator, registration for the DAX api group, and
all the various associated constants.
Signed-off-by: Rob Gardner <[email protected]>
Signed-off-by: Jonathan Helman <[email protected]>
Signed-off-by: Sanath Kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Among the existing architecture specific versions of
copy_siginfo_to_user32 there are several different implementation
problems. Some architectures fail to handle all of the cases in in
the siginfo union. Some architectures perform a blind copy of the
siginfo union when the si_code is negative. A blind copy suggests the
data is expected to be in 32bit siginfo format, which means that
receiving such a signal via signalfd won't work, or that the data is
in 64bit siginfo and the code is copying nonsense to userspace.
Create a single instance of copy_siginfo_to_user32 that all of the
architectures can share, and teach it to handle all of the cases in
the siginfo union correctly, with the assumption that siginfo is
stored internally to the kernel is 64bit siginfo format.
A special case is made for x86 x32 format. This is needed as presence
of both x32 and ia32 on x86_64 results in two different 32bit signal
formats. By allowing this small special case there winds up being
exactly one code base that needs to be maintained between all of the
architectures. Vastly increasing the testing base and the chances of
finding bugs.
As the x86 copy of copy_siginfo_to_user32 the call of the x86
signal_compat_build_tests were moved into sigaction_compat_abi, so
that they will keep running.
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
The function copy_siginfo_from_user32 is used for two things, in ptrace
since the dawn of siginfo for arbirarily modifying a signal that
user space sees, and in sigqueueinfo to send a signal with arbirary
siginfo data.
Create a single copy of copy_siginfo_from_user32 that all architectures
share, and teach it to handle all of the cases in the siginfo union.
In the generic version of copy_siginfo_from_user32 ensure that all
of the fields in siginfo are initialized so that the siginfo structure
can be safely copied to userspace if necessary.
When copying the embedded sigval union copy the si_int member. That
ensures the 32bit values passes through the kernel unchanged.
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
Pull sparc updates from David Miller:
1) Add missing cmpxchg64() for 32-bit sparc.
2) Timer conversions from Allen Pais and Kees Cook.
3) vDSO support, from Nagarathnam Muthusamy.
4) Fix sparc64 huge page table walks based upon bug report by Al Viro,
from Nitin Gupta.
5) Optimized fls() for T4 and above, from Vijay Kumar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix page table walk for PUD hugepages
sparc64: Convert timers to user timer_setup()
sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t
sparc/led: Convert timers to use timer_setup()
sparc64: Use sparc optimized fls and __fls for T4 and above
sparc64: SPARC optimized __fls function
sparc64: SPARC optimized fls function
sparc64: Define SPARC default __fls function
sparc64: Define SPARC default fls function
vDSO for sparc
sparc32: Add cmpxchg64().
sbus: char: Move D7S_MINOR to include/linux/miscdevice.h
sparc: time: Remove unneeded linux/miscdevice.h include
sparc64: mmu_context: Add missing include files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat and uaccess updates from Al Viro:
- {get,put}_compat_sigset() series
- assorted compat ioctl stuff
- more set_fs() elimination
- a few more timespec64 conversions
- several removals of pointless access_ok() in places where it was
followed only by non-__ variants of primitives
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
coredump: call do_unlinkat directly instead of sys_unlink
fs: expose do_unlinkat for built-in callers
ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
ipmi: get rid of pointless access_ok()
pi433: sanitize ioctl
cxlflash: get rid of pointless access_ok()
mtdchar: get rid of pointless access_ok()
r128: switch compat ioctls to drm_ioctl_kernel()
selection: get rid of field-by-field copyin
VT_RESIZEX: get rid of field-by-field copyin
i2c compat ioctls: move to ->compat_ioctl()
sched_rr_get_interval(): move compat to native, get rid of set_fs()
mips: switch to {get,put}_compat_sigset()
sparc: switch to {get,put}_compat_sigset()
s390: switch to {get,put}_compat_sigset()
ppc: switch to {get,put}_compat_sigset()
parisc: switch to {get,put}_compat_sigset()
get_compat_sigset()
get rid of {get,put}_compat_itimerspec()
io_getevents: Use timespec64 to represent timeouts
...
|
|
Switch to using the new timer_setup() and from_timer()
in LDOM Virtual I/O handshake.
Cc: Kees Cook <[email protected]>
Signed-off-by: Allen Pais <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable mdesc_handle.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
Acked-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a static variable to hold timeout
value.
Cc: "David S. Miller" <[email protected]>
Cc: Geliang Tang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For T4 and above, patch fls and __fls functions
at the boot time to use lzcnt instruction.
Signed-off-by: Vijay Kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Following patch is based on work done by Nick Alcock on 64-bit vDSO for sparc
in Oracle linux. I have extended it to include support for 32-bit vDSO for sparc
on 64-bit kernel.
vDSO for sparc is based on the X86 implementation. This patch
provides vDSO support for both 64-bit and 32-bit programs on 64-bit kernel.
vDSO will be disabled on 32-bit linux kernel on sparc.
*) vclock_gettime.c contains all the vdso functions. Since data page is mapped
before the vdso code page, the pointer to data page is got by subracting offset
from an address in the vdso code page. The return address stored in
%i7 is used for this purpose.
*) During compilation, both 32-bit and 64-bit vdso images are compiled and are
converted into raw bytes by vdso2c program to be ready for mapping into the
process. 32-bit images are compiled only if CONFIG_COMPAT is enabled. vdso2c
generates two files vdso-image-64.c and vdso-image-32.c which contains the
respective vDSO image in C structure.
*) During vdso initialization, required number of vdso pages are allocated and
raw bytes are copied into the pages.
*) During every exec, these pages are mapped into the process through
arch_setup_additional_pages and the location of mapping is passed on to the
process through aux vector AT_SYSINFO_EHDR which is used by glibc.
*) A new update_vsyscall routine for sparc is added to keep the data page in
vdso updated.
*) As vDSO cannot contain dynamically relocatable references, a new version of
cpu_relax is added for the use of vDSO.
This change also requires a putback to glibc to use vDSO. For testing,
programs planning to try vDSO can be compiled against the generated
vdso(64/32).so in the source.
Testing:
========
[root@localhost ~]# cat vdso_test.c
int main() {
struct timespec tv_start, tv_end;
struct timeval tv_tmp;
int i;
int count = 1 * 1000 * 10000;
long long diff;
clock_gettime(0, &tv_start);
for (i = 0; i < count; i++)
gettimeofday(&tv_tmp, NULL);
clock_gettime(0, &tv_end);
diff = (long long)(tv_end.tv_sec -
tv_start.tv_sec)*(1*1000*1000*1000);
diff += (tv_end.tv_nsec - tv_start.tv_nsec);
printf("Start sec: %d\n", tv_start.tv_sec);
printf("End sec : %d\n", tv_end.tv_sec);
printf("%d cycles in %lld ns = %f ns/cycle\n", count, diff,
(double)diff / (double)count);
return 0;
}
[root@localhost ~]# cc vdso_test.c -o t32_without_fix -m32 -lrt
[root@localhost ~]# ./t32_without_fix
Start sec: 1502396130
End sec : 1502396140
10000000 cycles in 9565148528 ns = 956.514853 ns/cycle
[root@localhost ~]# cc vdso_test.c -o t32_with_fix -m32 ./vdso32.so.dbg
[root@localhost ~]# ./t32_with_fix
Start sec: 1502396168
End sec : 1502396169
10000000 cycles in 798141262 ns = 79.814126 ns/cycle
[root@localhost ~]# cc vdso_test.c -o t64_without_fix -m64 -lrt
[root@localhost ~]# ./t64_without_fix
Start sec: 1502396208
End sec : 1502396218
10000000 cycles in 9846091800 ns = 984.609180 ns/cycle
[root@localhost ~]# cc vdso_test.c -o t64_with_fix -m64 ./vdso64.so.dbg
[root@localhost ~]# ./t64_with_fix
Start sec: 1502396257
End sec : 1502396257
10000000 cycles in 380984048 ns = 38.098405 ns/cycle
V1 to V2 Changes:
=================
Added hot patching code to switch the read stick instruction to read
tick instruction based on the hardware.
V2 to V3 Changes:
=================
Merged latest changes from sparc-next and moved the initialization
of clocksource_tick.archdata.vclock_mode to time_init_early. Disabled
queued spinlock and rwlock configuration when simulating 32-bit config
to compile 32-bit VDSO.
V3 to V4 Changes:
=================
Hardcoded the page size as 8192 in linker script for both 64-bit and
32-bit binaries. Removed unused variables in vdso2c.h. Added -mv8plus flag to
Makefile to prevent the generation of relocation entries for __lshrdi3 in 32-bit
vdso binary.
Signed-off-by: Nick Alcock <[email protected]>
Signed-off-by: Nagarathnam Muthusamy <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a static variable to hold timeout
value.
Cc: "David S. Miller" <[email protected]>
Cc: Geliang Tang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
arch/sparc/kernel/time_64.c does not contain any miscdevice so the
inclusion of linux/miscdevice.h is unnecessary.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
slightly more complicated than usual, since old sigframe layout
on sparc keeps the first 32 bits of mask away from the rest
Signed-off-by: Al Viro <[email protected]>
|
|
similar to put_compat_sigset()
Signed-off-by: Al Viro <[email protected]>
|
|
There are 4 callers of sigset_to_compat() in the entire kernel. One is
in sparc compat rt_sigaction(2), the rest are in kernel/signal.c itself.
All are followed by copy_to_user(), and all but the sparc one are under
"if it's big-endian..." ifdefs.
Let's transform sigset_to_compat() into put_compat_sigset() that also
calls copy_to_user().
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Dmitry V. Levin <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
"Life has been busy and I have not gotten half as much done this round
as I would have liked. I delayed it so that a minor conflict
resolution with the mips tree could spend a little time in linux-next
before I sent this pull request.
This includes two long delayed user namespace changes from Kirill
Tkhai. It also includes a very useful change from Serge Hallyn that
allows the security capability attribute to be used inside of user
namespaces. The practical effect of this is people can now untar
tarballs and install rpms in user namespaces. It had been suggested to
generalize this and encode some of the namespace information
information in the xattr name. Upon close inspection that makes the
things that should be hard easy and the things that should be easy
more expensive.
Then there is my bugfix/cleanup for signal injection that removes the
magic encoding of the siginfo union member from the kernel internal
si_code. The mips folks reported the case where I had used FPE_FIXME
me is impossible so I have remove FPE_FIXME from mips, while at the
same time including a return statement in that case to keep gcc from
complaining about unitialized variables.
I almost finished the work to get make copy_siginfo_to_user a trivial
copy to user. The code is available at:
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3
But I did not have time/energy to get the code posted and reviewed
before the merge window opened.
I was able to see that the security excuse for just copying fields
that we know are initialized doesn't work in practice there are buggy
initializations that don't initialize the proper fields in siginfo. So
we still sometimes copy unitialized data to userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
Introduce v3 namespaced file capabilities
mips/signal: In force_fcr31_sig return in the impossible case
signal: Remove kernel interal si_code magic
fcntl: Don't use ambiguous SIG_POLL si_codes
prctl: Allow local CAP_SYS_ADMIN changing exe_file
security: Use user_namespace::level to avoid redundant iterations in cap_capable()
userns,pidns: Verify the userns for new pid namespaces
signal/testing: Don't look for __SI_FAULT in userspace
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/alpha: Document a conflict with SI_USER for SIGTRAP
|
|
Pull sparc updates from David Miller:
1) Use register window state adjustment instructions when available,
from Anthony Yznaga.
2) Add VCC console concentrator driver, from Jag Raman.
3) Add 16GB hugepage support, from Nitin Gupta.
4) Support cpu 'poke' hypercall, from Vijay Kumar.
5) Add M7/M8 optimized memcpy/memset/copy_{to,from}_user, from Babu
Moger.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (33 commits)
sparc64: Handle additional cases of no fault loads
sparc64: speed up etrap/rtrap on NG2 and later processors
sparc64: vcc: make ktermios const
sparc: leon: grpci1: constify of_device_id
sparc: leon: grpci2: constify of_device_id
sparc64: vcc: Check for IS_ERR() instead of NULL
sparc64: Cleanup hugepage table walk functions
sparc64: Add 16GB hugepage support
sparc64: Support huge PUD case in get_user_pages
sparc64: vcc: Add install & cleanup TTY operations
sparc64: vcc: Add break_ctl TTY operation
sparc64: vcc: Add chars_in_buffer TTY operation
sparc64: vcc: Add write & write_room TTY operations
sparc64: vcc: Add hangup TTY operation
sparc64: vcc: Add open & close TTY operations
sparc64: vcc: Enable LDC event processing engine
sparc64: vcc: Add RX & TX timer for delayed LDC operation
sparc64: vcc: Create sysfs attribute group
sparc64: vcc: Enable VCC port probe and removal
sparc64: vcc: TTY driver initialization and cleanup
...
|
|
Load instructions using ASI_PNF or other no-fault ASIs should not
cause a SIGSEGV or SIGBUS.
A garden variety unmapped address follows the TSB miss path, and when
no valid mapping is found in the process page tables, the miss handler
checks to see if the access was via a no-fault ASI. It then fixes up
the target register with a zero, and skips the no-fault load
instruction.
But different paths are taken for data access exceptions and alignment
traps, and these do not respect the no-fault ASI. We add checks in
these paths for the no-fault ASI, and fix up the target register and
TPC just like in the TSB miss case.
Signed-off-by: Rob Gardner <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For many sun4v processor types, reading or writing a privileged register
has a latency of 40 to 70 cycles. Use a combination of the low-latency
allclean, otherw, normalw, and nop instructions in etrap and rtrap to
replace 2 rdpr and 5 wrpr instructions and improve etrap/rtrap
performance. allclean, otherw, and normalw are available on NG2 and
later processors.
The average ticks to execute the flush windows trap ("ta 0x3") with and
without this patch on select platforms:
CPU Not patched Patched % Latency Reduction
NG2 1762 1558 -11.58
NG4 3619 3204 -11.47
M7 3015 2624 -12.97
SPARC64-X 829 770 -7.12
Signed-off-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- add enhanced Downstream Port Containment support, which prints more
details about Root Port Programmed I/O errors (Dongdong Liu)
- add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)
- add MediaTek MT2712 and MT7622 support (Ryder Lee)
- add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)
- add Qualcom IPQ8074 support (Varadarajan Narayanan)
- add R-Car r8a7743/5 device tree support (Biju Das)
- add Rockchip per-lane PHY support for better power management (Shawn
Lin)
- fix IRQ mapping for hot-added devices by replacing the
pci_fixup_irqs() boot-time design with a host bridge hook called at
probe-time (Lorenzo Pieralisi, Matthew Minter)
- fix race when enabling two devices that results in upstream bridge
not being enabled correctly (Srinath Mannam)
- fix pciehp power fault infinite loop (Keith Busch)
- fix SHPC bridge MSI hotplug events by enabling bus mastering
(Aleksandr Bezzubikov)
- fix a VFIO issue by correcting PCIe capability sizes (Alex
Williamson)
- fix an INTD issue on Xilinx and possibly other drivers by unifying
INTx IRQ domain support (Paul Burton)
- avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
Roedel)
- allow APM X-Gene device assignment to guests by adding an ACS quirk
(Feng Kan)
- fix driver crashes by disabling Extended Tags on Broadcom HT2100
(Extended Tags support is required for PCIe Receivers but not
Requesters, and we now enable them by default when Requesters support
them) (Sinan Kaya)
- fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
use the real Requester ID (not a phantom RID) (Robin Murphy)
- prevent assignment of Intel VMD children to guests (which may be
supported eventually, but isn't yet) by not associating an IOMMU with
them (Jon Derrick)
- fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
Bauer)
- fix a Function-Level Reset issue with Intel 750 NVMe by waiting
longer (up to 60sec instead of 1sec) for device to become ready
(Sinan Kaya)
- fix a Function-Level Reset issue on iProc Stingray by working around
hardware defects in the CRS implementation (Oza Pawandeep)
- fix an issue with Intel NVMe P3700 after an iProc reset by adding a
delay during shutdown (Oza Pawandeep)
- fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
in compose_msi_msg() (Stephen Hemminger)
- fix a wireless LAN driver timeout by clearing DesignWare MSI
interrupt status after it is handled, not before (Faiz Abbas)
- fix DesignWare ATU enable checking (Jisheng Zhang)
- reduce Layerscape dependencies on the bootloader by doing more
initialization in the driver (Hou Zhiqiang)
- improve Intel VMD performance allowing allocation of more IRQ vectors
than present CPUs (Keith Busch)
- improve endpoint framework support for initial DMA mask, different
BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
Vijay Abraham I, Stan Drozd)
- rework CRS support to add periodic messages while we poll during
enumeration and after Function-Level Reset and prepare for possible
other uses of CRS (Sinan Kaya)
- clean up Root Port AER handling by removing unnecessary code and
moving error handler methods to struct pcie_port_service_driver
(Christoph Hellwig)
- clean up error handling paths in various drivers (Bjorn Andersson,
Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
Lorenzo Pieralisi, Sergei Shtylyov)
- clean up SR-IOV resource handling by disabling VF decoding before
updating the corresponding resource structs (Gavin Shan)
- clean up DesignWare-based drivers by unifying quirks to update Class
Code and Interrupt Pin and related handling of write-protected
registers (Hou Zhiqiang)
- clean up by adding empty generic pcibios_align_resource() and
pcibios_fixup_bus() and removing empty arch-specific implementations
(Palmer Dabbelt)
- request exclusive reset control for several drivers to allow cleanup
elsewhere (Philipp Zabel)
- constify various structures (Arvind Yadav, Bhumika Goyal)
- convert from full_name() to %pOF (Rob Herring)
- remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
Lin)
* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
PCI: xgene: Clean up whitespace
PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
PCI: xgene: Fix platform_get_irq() error handling
PCI: xilinx-nwl: Fix platform_get_irq() error handling
PCI: rockchip: Fix platform_get_irq() error handling
PCI: altera: Fix platform_get_irq() error handling
PCI: spear13xx: Fix platform_get_irq() error handling
PCI: artpec6: Fix platform_get_irq() error handling
PCI: armada8k: Fix platform_get_irq() error handling
PCI: dra7xx: Fix platform_get_irq() error handling
PCI: exynos: Fix platform_get_irq() error handling
PCI: iproc: Clean up whitespace
PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
PCI: iproc: Add 500ms delay during device shutdown
PCI: Fix typos and whitespace errors
PCI: Remove unused "res" variable from pci_resource_io()
PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
PCI/AER: Reformat AER register definitions
iommu/vt-d: Prevent VMD child devices from being remapping targets
x86/PCI: Use is_vmd() rather than relying on the domain number
...
|
|
* pci/resource:
microblaze/PCI: Remove pcibios_setup_bus_{self/devices} dead code
ARC: Remove empty kernel/pcibios.c
PCI: Add a generic weak pcibios_align_resource()
PCI: Add a generic weak pcibios_fixup_bus()
|
|
of_device_id are not supposed to change at runtime. All functions
working with of_device_id provided by <linux/of.h> work with const
of_device_ids. So mark the const and __initconst.
Signed-off-by: Arvind Yadav <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
of_device_id are not supposed to change at runtime. All functions
working with of_device_id provided by <linux/of.h> work with const
of_device_ids. So mark the const and __initconst.
Signed-off-by: Arvind Yadav <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When building the kernel for Sparc using gcc 7.x, the build fails
with:
arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’:
arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cmd |= PCI_COMMAND_IO;
^~
The simplified code looks like this:
unsigned int cmd;
[...]
pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
[...]
cmd |= PCI_COMMAND_IO;
I.e, the code assumes that pcic_read_config() will always initialize
cmd. But it's not the case. Looking at pcic_read_config(), if
bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will
not be initialized.
As a simple fix, we initialize cmd to zero at the beginning of
pcibios_fixup_bus.
Signed-off-by: Thomas Petazzoni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There is no need to log message if ATU hvapi couldn't get register.
Unlike PCI hvapi, ATU hvapi registration failure is not hard error.
Even if ATU hvapi registration fails (on system with ATU or without
ATU) system continues with legacy IOMMU. So only log message when
ATU hvapi successfully get registered.
Signed-off-by: Tushar Dave <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Adds support for 16GB hugepage size. To use this page size
use kernel parameters as:
default_hugepagesz=16G hugepagesz=16G hugepages=10
Testing:
Tested with the stream benchmark which allocates 48G of
arrays backed by 16G hugepages and does RW operation on
them in parallel.
Orabug: 25362942
Cc: Anthony Yznaga <[email protected]>
Reviewed-by: Bob Picco <[email protected]>
Signed-off-by: Nitin Gupta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add RX & TX timers to perform delayed/asynchronous LDC
read and write operations.
Signed-off-by: Jagannathan Raman <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Enables VCC port probe and removal to initialize and terminate
VCC ports respectively. When a device/port matching the VCC driver
is added, the probe function is invoked along with a reference
to the device. remove function is called when the device is
removed.
Also add APIs to cache and retrieve VCC ports from a VCC table
Signed-off-by: Jagannathan Raman <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add C macros to print debug messages from VCC module
Signed-off-by: Jagannathan Raman <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
New algorithm that takes advantage of the M7/M8 block init store
ASI, ie, overlapping pipelines and miss buffer filling.
Full details in code comments.
Signed-off-by: Babu Moger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
It overflows the amount of space available in the initial .text section
of trap handler assembler in some configurations, resulting in build
failures.
Signed-off-by: David S. Miller <[email protected]>
|
|
Use CPU_POKE hypervisor call to resume idle cpu if supported.
Signed-off-by: Vijay Kumar <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|