aboutsummaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)AuthorFilesLines
2020-06-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+2
Merge updates from Andrew Morton: "A few little subsystems and a start of a lot of MM patches. Subsystems affected by this patch series: squashfs, ocfs2, parisc, vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup, swap, memcg, pagemap, memory-failure, vmalloc, kasan" * emailed patches from Andrew Morton <[email protected]>: (128 commits) kasan: move kasan_report() into report.c mm/mm_init.c: report kasan-tag information stored in page->flags ubsan: entirely disable alignment checks under UBSAN_TRAP kasan: fix clang compilation warning due to stack protector x86/mm: remove vmalloc faulting mm: remove vmalloc_sync_(un)mappings() x86/mm/32: implement arch_sync_kernel_mappings() x86/mm/64: implement arch_sync_kernel_mappings() mm/ioremap: track which page-table levels were modified mm/vmalloc: track which page-table levels were modified mm: add functions to track page directory modifications s390: use __vmalloc_node in stack_alloc powerpc: use __vmalloc_node in alloc_vm_stack arm64: use __vmalloc_node in arch_alloc_vmap_stack mm: remove vmalloc_user_node_flags mm: switch the test_vmalloc module to use __vmalloc_node mm: remove __vmalloc_node_flags_caller mm: remove both instances of __vmalloc_node_flags mm: remove the prot argument to __vmalloc_node mm: remove the pgprot argument to __vmalloc ...
2020-06-02mm: remove __get_vm_areaChristoph Hellwig1-1/+2
Switch the two remaining callers to use __get_vm_area_caller instead. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: David Airlie <[email protected]> Cc: Gao Xiang <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Haiyang Zhang <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: "K. Y. Srinivasan" <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Kelley <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Nitin Gupta <[email protected]> Cc: Robin Murphy <[email protected]> Cc: Sakari Ailus <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Wei Liu <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-01Merge branch 'from-miklos' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Assorted patches from Miklos. An interesting part here is /proc/mounts stuff..." The "/proc/mounts stuff" is using a cursor for keeeping the location data while traversing the mount listing. Also probably worth noting is the addition of faccessat2(), which takes an additional set of flags to specify how the lookup is done (AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH). * 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: add faccessat2 syscall vfs: don't parse "silent" option vfs: don't parse "posixacl" option vfs: don't parse forbidden flags statx: add mount_root statx: add mount ID statx: don't clear STATX_ATIME on SB_RDONLY uapi: deprecate STATX_ALL utimensat: AT_EMPTY_PATH support vfs: split out access_override_creds() proc/mounts: add cursor aio: fix async fsync creds vfs: allow unprivileged whiteout creation
2020-06-01Merge branch 'uaccess.csum' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess/csum updates from Al Viro: "Regularize the sitation with uaccess checksum primitives: - fold csum_partial_... into csum_and_copy_..._user() - on x86 collapse several access_ok()/stac()/clac() into user_access_begin()/user_access_end()" * 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: default csum_and_copy_to_user(): don't bother with access_ok() take the dummy csum_and_copy_from_user() into net/checksum.h arm: switch to csum_and_copy_from_user() sh32: convert to csum_and_copy_from_user() m68k: convert to csum_and_copy_from_user() xtensa: switch to providing csum_and_copy_from_user() sparc: switch to providing csum_and_copy_from_user() parisc: turn csum_partial_copy_from_user() into csum_and_copy_from_user() alpha: turn csum_partial_copy_from_user() into csum_and_copy_from_user() ia64: turn csum_partial_copy_from_user() into csum_and_copy_from_user() ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user() x86: switch 32bit csum_and_copy_to_user() to user_access_{begin,end}() x86: switch both 32bit and 64bit to providing csum_and_copy_from_user() x86_64: csum_..._copy_..._user(): switch to unsafe_..._user() get rid of csum_partial_copy_to_user()
2020-06-01Merge tag 'core-rcu-2020-06-01' of ↵Linus Torvalds2-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The RCU updates for this cycle were: - RCU-tasks update, including addition of RCU Tasks Trace for BPF use and TASKS_RUDE_RCU - kfree_rcu() updates. - Remove scheduler locking restriction - RCU CPU stall warning updates. - Torture-test updates. - Miscellaneous fixes and other updates" * tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits) rcu: Allow for smp_call_function() running callbacks from idle rcu: Provide rcu_irq_exit_check_preempt() rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter() rcu: Provide __rcu_is_watching() rcu: Provide rcu_irq_exit_preempt() rcu: Make RCU IRQ enter/exit functions rely on in_nmi() rcu/tree: Mark the idle relevant functions noinstr x86: Replace ist_enter() with nmi_enter() x86/mce: Send #MC singal from task work x86/entry: Get rid of ist_begin/end_non_atomic() sched,rcu,tracing: Avoid tracing before in_nmi() is correct sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception lockdep: Always inline lockdep_{off,on}() hardirq/nmi: Allow nested nmi_enter() arm64: Prepare arch_nmi_enter() for recursion printk: Disallow instrumenting print_nmi_enter() printk: Prepare for nested printk_nmi_enter() rcutorture: Convert ULONG_CMP_LT() to time_before() torture: Add a --kasan argument torture: Save a few lines by using config_override_param initially ...
2020-06-01sh: remove sh5 supportArnd Bergmann113-11548/+64
sh5 never became a product and has probably never really worked. Remove it by recursively deleting all associated Kconfig options and all corresponding files. Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01sh: add missing EXPORT_SYMBOL() for __delayKuninori Morimoto1-0/+1
__delay() is used from kernel module. We need EXPORT_SYMBOL(), otherwise we will get compile error. ERROR: "__delay" [drivers/net/phy/mdio-cavium.ko] undefined! Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01sh: Convert ins[bwl]/outs[bwl] macros to inline functionsKuninori Morimoto1-6/+28
Macro ins[bwl]/outs[bwl] are just calling BUG(), but that results in unused variable warnings all over the place. This patch convert macro to inline to avoid warning We will get this kind of warning without this patch ${LINUX}/drivers/iio/adc/ad7606_par.c:21:23: \ warning: unused variable 'st' [-Wunused-variable] struct ad7606_state *st = iio_priv(indio_dev); ^~ Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01sh: Convert iounmap() macros to inline functionsKuninori Morimoto1-1/+1
Macro iounmap() do nothing, but that results in unused variable warnings all over the place. This patch convert it to inline to avoid warning We will get this warning without this patch ${LINUX}/drivers/thermal/broadcom/ns-thermal.c:78:21: \ warning: unused variable 'ns_thermal' [-Wunused-variable] struct ns_thermal *ns_thermal = platform_get_drvdata(pdev); ^~~~~~~~~~ Fixes: 98c90e5ea34e9 ("sh: remove __iounmap") Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xxKuninori Morimoto1-0/+17
__ashiftrt_r4_xx might be used from kernel module. We need DECLARE_EXPORT() for them, otherwise we will get compile error. This patch adds missing DECLARE_EXPORT() ERROR: "__ashiftrt_r4_25" [drivers/iio/pressure/bmp280.ko] undefined! ERROR: "__ashiftrt_r4_26" [drivers/iio/dac/ad5764.ko] undefined! ERROR: "__ashiftrt_r4_26" [drivers/iio/accel/mma7660.ko] undefined! ERROR: "__ashiftrt_r4_25" [drivers/iio/accel/dmard06.ko] undefined! ERROR: "__ashiftrt_r4_26" [drivers/iio/accel/bma220_spi.ko] undefined! ERROR: "__ashiftrt_r4_25" [drivers/crypto/hisilicon/sec/hisi_sec.ko] undefined! ERROR: "__ashiftrt_r4_26" [drivers/rtc/rtc-x1205.ko] undefined! ERROR: "__ashiftrt_r4_25" [drivers/rtc/rtc-pcf85063.ko] undefined! ERROR: "__ashiftrt_r4_25" [drivers/rtc/rtc-pcf2123.ko] undefined! ERROR: "__ashiftrt_r4_25" [drivers/input/tablet/gtco.ko] undefined! ERROR: "__ashiftrt_r4_26" [drivers/input/mouse/psmouse.ko] undefined! ERROR: "__ashiftrt_r4_28" [drivers/input/mouse/psmouse.ko] undefined! ERROR: "__ashiftrt_r4_28" [drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko] undefined! ERROR: "__ashiftrt_r4_28" [fs/udf/udf.ko] undefined! Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01sh: configs: Cleanup old Kconfig IO scheduler optionsKrzysztof Kozlowski22-38/+4
CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be now enabled by default (along with MQ_IOSCHED_KYBER). The BFQ_GROUP_IOSCHED is the only multiqueue scheduler which comes with group scheduling so select it in configs previously choosing CFQ_GROUP_IOSCHED. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01arch/sh: vmlinux.scrRomain Naour1-1/+1
Since the patch [1], building the kernel using a toolchain built with Binutils 2.33.1 prevent booting a sh4 system under Qemu. Apply the patch provided by Alan Modra [2] that fix alignment of rodata. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ebd2263ba9a9124d93bbc0ece63d7e0fae89b40e [2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html Signed-off-by: Romain Naour <[email protected]> Cc: Alan Modra <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfigBin Meng1-1/+1
CONFIG_MTD_M25P80 was removed and replaced by CONFIG_MTD_SPI_NOR in commit b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Signed-off-by: Bin Meng <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-06-01sh: sh4a: Bring back tmu3_device early deviceKrzysztof Kozlowski1-0/+1
Commit 1399c195ef50 ("sh: Switch to new style TMU device") converted tmu3_device platform device to new style of platform data but removed it from sh7786_early_devices array effectively removing last three timers and causing a warning: arch/sh/kernel/cpu/sh4a/setup-sh7786.c:243:31: warning: ‘tmu3_device’ defined but not used [-Wunused-variable] Fixes: 1399c195ef50 ("sh: Switch to new style TMU device") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Rich Felker <[email protected]>
2020-05-29sh32: convert to csum_and_copy_from_user()Al Viro1-2/+7
Signed-off-by: Al Viro <[email protected]>
2020-05-23sh: include linux/time_types.h for sockiosArnd Bergmann1-0/+2
Using the socket ioctls on arch/sh (and only there) causes build time problems when __kernel_old_timeval/__kernel_old_timespec are not already visible to the compiler. Add an explict include line for the header that defines these structures. Fixes: 8c709f9a0693 ("y2038: sh: remove timeval/timespec usage from headers") Fixes: 0768e17073dc ("net: socket: implement 64-bit timestamps") Reported-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: John Paul Adrian Glaubitz <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: John Paul Adrian Glaubitz <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-05-19sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exceptionPeter Zijlstra2-1/+12
SuperH is the last remaining user of arch_ftrace_nmi_{enter,exit}(), remove it from the generic code and into the SuperH code. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Cc: Rich Felker <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-05-14vfs: add faccessat2 syscallMiklos Szeredi1-0/+1
POSIX defines faccessat() as having a fourth "flags" argument, while the linux syscall doesn't have it. Glibc tries to emulate AT_EACCESS and AT_SYMLINK_NOFOLLOW, but AT_EACCESS emulation is broken. Add a new faccessat(2) syscall with the added flags argument and implement both flags. The value of AT_EACCESS is defined in glibc headers to be the same as AT_REMOVEDIR. Use this value for the kernel interface as well, together with the explanatory comment. Also add AT_EMPTY_PATH support, which is not documented by POSIX, but can be useful and is trivial to implement. Signed-off-by: Miklos Szeredi <[email protected]>
2020-05-05clk: Allow the common clk framework to be selectableStephen Boyd1-0/+5
Enable build testing and configuration control of the common clk framework so that more code coverage and testing can be done on the common clk framework across various architectures. This also nicely removes the requirement that architectures must select the framework when they don't use it in architecture code. There's one snag with doing this, and that's making sure that randconfig builds don't select this option when some architecture or platform implements 'struct clk' outside of the common clk framework. Introduce a new config option 'HAVE_LEGACY_CLK' to indicate those platforms that haven't migrated to the common clk framework and therefore shouldn't be allowed to select this new config option. Also add a note that we hope one day to remove this config entirely. Based on a patch by Mark Brown <[email protected]>. Cc: Mark Brown <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Mark Salter <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: Jiaxun Yang <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Russell King <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Reviewed-by: Mark Brown <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]>
2020-04-24Merge tag 'kbuild-fixes-v5.7' of ↵Linus Torvalds2-28/+34
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix scripts/config to properly handle ':' in string type CONFIG options - fix unneeded rebuilds of DT schema check rule - git rid of ordering dependency between <linux/vermagic.h> and <linux/module.h> to fix build errors in some network drivers - clean up generated headers of host arch with 'make ARCH=um mrproper' * tag 'kbuild-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: h8300: ignore vmlinux.lds Documentation: kbuild: fix the section title format um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/ arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h> kbuild: fix DT binding schema rule again to avoid needless rebuilds scripts/config: allow colons in option strings for sed
2020-04-23arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h>Masahiro Yamada2-28/+34
As the bug report [1] pointed out, <linux/vermagic.h> must be included after <linux/module.h>. I believe we should not impose any include order restriction. We often sort include directives alphabetically, but it is just coding style convention. Technically, we can include header files in any order by making every header self-contained. Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in <asm/module.h>, which is not included from <linux/vermagic.h>. Hence, the straight-forward fix-up would be as follows: |--- a/include/linux/vermagic.h |+++ b/include/linux/vermagic.h |@@ -1,5 +1,6 @@ | /* SPDX-License-Identifier: GPL-2.0 */ | #include <generated/utsrelease.h> |+#include <linux/module.h> | | /* Simply sanity version stamp for modules. */ | #ifdef CONFIG_SMP This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC definitions into <asm/vermagic.h>. With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal, and the location of MODULE_ARCH_VERMAGIC definitions will be consistent. For arc and ia64, MODULE_PROC_FAMILY is only used for defining MODULE_ARCH_VERMAGIC. I squashed it. For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely because they contained nothing but MODULE_ARCH_VERMAGIC definition. Kbuild will automatically generate <asm/modules.h> at build-time, wrapping <asm-generic/module.h>. [1] https://lore.kernel.org/lkml/[email protected] Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Jessica Yu <[email protected]>
2020-04-21sh: fix build error in mm/init.cMasahiro Yamada1-1/+1
The closing parenthesis is missing. Fixes: bfeb022f8fe4 ("mm/memory_hotplug: add pgprot_t to mhp_params") Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Cc: Stephen Rothwell <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-11Merge tag 'kbuild-v5.7-2' of ↵Linus Torvalds3-9/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
2020-04-10mm/memory_hotplug: add pgprot_t to mhp_paramsLogan Gunthorpe1-0/+3
devm_memremap_pages() is currently used by the PCI P2PDMA code to create struct page mappings for IO memory. At present, these mappings are created with PAGE_KERNEL which implies setting the PAT bits to be WB. However, on x86, an mtrr register will typically override this and force the cache type to be UC-. In the case firmware doesn't set this register it is effectively WB and will typically result in a machine check exception when it's accessed. Other arches are not currently likely to function correctly seeing they don't have any MTRR registers to fall back on. To solve this, provide a way to specify the pgprot value explicitly to arch_add_memory(). Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a simple change to pass the pgprot_t down to their respective functions which set up the page tables. For x86_32, set the page tables explicitly using _set_memory_prot() (seeing they are already mapped). For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this should be fine, for now, seeing these architectures don't support ZONE_DEVICE. A check in __add_pages() is also added to ensure the pgprot parameter was set for all arches. Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: David Hildenbrand <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Dan Williams <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Eric Badger <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-10mm/memory_hotplug: rename mhp_restrictions to mhp_paramsLogan Gunthorpe1-2/+2
The mhp_restrictions struct really doesn't specify anything resembling a restriction anymore so rename it to be mhp_params as it is a list of extended parameters. Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Dan Williams <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Eric Badger <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-10mm/vma: define a default value for VM_DATA_DEFAULT_FLAGSAnshuman Khandual1-3/+0
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Russell King <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Mark Salter <[email protected]> Cc: Guo Ren <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Brian Cain <[email protected]> Cc: Tony Luck <[email protected]> Cc: Michal Simek <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paul Burton <[email protected]> Cc: Nick Hu <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Rich Felker <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Jeff Dike <[email protected]> Cc: Chris Zankel <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-09sh: remove unneeded uapi asm-generic wrappersMasahiro Yamada2-4/+0
These are listed in include/uapi/asm-generic/Kbuild, so Kbuild will automatically generate them. Signed-off-by: Masahiro Yamada <[email protected]>
2020-04-09sh: use __builtin_constant_p() directly instead of IS_IMMEDIATE()Masahiro Yamada1-5/+3
__builtin_constant_p(nr) is used everywhere now. It does not make much sense to define IS_IMMEDIATE() as its alias. Signed-off-by: Masahiro Yamada <[email protected]>
2020-04-07asm-generic: fix unistd_32.h generation formatMichal Simek1-1/+1
Generated files are also checked by sparse that's why add newline to remove sparse (C=1) warning. The issue was found on Microblaze and reported like this: ./arch/microblaze/include/generated/uapi/asm/unistd_32.h:438:45: warning: no newline at end of file Mips and PowerPC have it already but let's align with style used by m68k. Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Stefan Asserhall <[email protected]> Acked-by: Max Filippov <[email protected]> (xtensa) Cc: Arnd Bergmann <[email protected]> Cc: Max Filippov <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Chris Zankel <[email protected]> Cc: David S. Miller <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: James Bottomley <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Paul Burton <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Rich Felker <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Tony Luck <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/4d32ab4e1fb2edb691d2e1687e8fb303c09fd023.1581504803.git.michal.simek@xilinx.com Signed-off-by: Linus Torvalds <[email protected]>
2020-04-07mm/vma: make vma_is_accessible() available for general useAnshuman Khandual1-1/+1
Lets move vma_is_accessible() helper to include/linux/mm.h which makes it available for general use. While here, this replaces all remaining open encodings for VMA access check with vma_is_accessible(). Signed-off-by: Anshuman Khandual <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Guo Ren <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Cc: Guo Ren <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paul Burton <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Alexander Viro <[email protected]> Cc: "Aneesh Kumar K.V" <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Nick Piggin <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds4-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+0
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-04-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-23/+6
Merge updates from Andrew Morton: "A large amount of MM, plenty more to come. Subsystems affected by this patch series: - tools - kthread - kbuild - scripts - ocfs2 - vfs - mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap, sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy, hugetlbfs, hugetlb" * emailed patches from Andrew Morton <[email protected]>: (155 commits) include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS selftests/vm: fix map_hugetlb length used for testing read and write mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge() mm/hugetlb.c: clean code by removing unnecessary initialization hugetlb_cgroup: add hugetlb_cgroup reservation docs hugetlb_cgroup: add hugetlb_cgroup reservation tests hugetlb: support file_region coalescing again hugetlb_cgroup: support noreserve mappings hugetlb_cgroup: add accounting for shared mappings hugetlb: disable region_add file_region coalescing hugetlb_cgroup: add reservation accounting for private mappings mm/hugetlb_cgroup: fix hugetlb_cgroup migration hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations hugetlb_cgroup: add hugetlb_cgroup reservation counter hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization mm/memblock.c: remove redundant assignment to variable max_addr mm: mempolicy: require at least one nodeid for MPOL_PREFERRED mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk() ...
2020-04-02mm: allow VM_FAULT_RETRY for multiple timesPeter Xu1-1/+0
The idea comes from a discussion between Linus and Andrea [1]. Before this patch we only allow a page fault to retry once. We achieved this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing handle_mm_fault() the second time. This was majorly used to avoid unexpected starvation of the system by looping over forever to handle the page fault on a single page. However that should hardly happen, and after all for each code path to return a VM_FAULT_RETRY we'll first wait for a condition (during which time we should possibly yield the cpu) to happen before VM_FAULT_RETRY is really returned. This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY flag when we receive VM_FAULT_RETRY. It means that the page fault handler now can retry the page fault for multiple times if necessary without the need to generate another page fault event. Meanwhile we still keep the FAULT_FLAG_TRIED flag so page fault handler can still identify whether a page fault is the first attempt or not. Then we'll have these combinations of fault flags (only considering ALLOW_RETRY flag and TRIED flag): - ALLOW_RETRY and !TRIED: this means the page fault allows to retry, and this is the first try - ALLOW_RETRY and TRIED: this means the page fault allows to retry, and this is not the first try - !ALLOW_RETRY and !TRIED: this means the page fault does not allow to retry at all - !ALLOW_RETRY and TRIED: this is forbidden and should never be used In existing code we have multiple places that has taken special care of the first condition above by checking against (fault_flags & FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect the first retry of a page fault by checking against both (fault_flags & FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now even the 2nd try will have the ALLOW_RETRY set, then use that helper in all existing special paths. One example is in __lock_page_or_retry(), now we'll drop the mmap_sem only in the first attempt of page fault and we'll keep it in follow up retries, so old locking behavior will be retained. This will be a nice enhancement for current code [2] at the same time a supporting material for the future userfaultfd-writeprotect work, since in that work there will always be an explicit userfault writeprotect retry for protected pages, and if that cannot resolve the page fault (e.g., when userfaultfd-writeprotect is used in conjunction with swapped pages) then we'll possibly need a 3rd retry of the page fault. It might also benefit other potential users who will have similar requirement like userfault write-protection. GUP code is not touched yet and will be covered in follow up patch. Please read the thread below for more information. [1] https://lore.kernel.org/lkml/[email protected]/ [2] https://lore.kernel.org/lkml/[email protected]/ Suggested-by: Linus Torvalds <[email protected]> Suggested-by: Andrea Arcangeli <[email protected]> Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Brian Geffon <[email protected]> Cc: Bobby Powers <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Denis Plotnikov <[email protected]> Cc: "Dr . David Alan Gilbert" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Martin Cracauer <[email protected]> Cc: Marty McFadden <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Maya Gokhale <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Emelyanov <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-02mm: introduce FAULT_FLAG_DEFAULTPeter Xu1-1/+1
Although there're tons of arch-specific page fault handlers, most of them are still sharing the same initial value of the page fault flags. Say, merely all of the page fault handlers would allow the fault to be retried, and they also allow the fault to respond to SIGKILL. Let's define a default value for the fault flags to replace those initial page fault flags that were copied over. With this, it'll be far easier to introduce new fault flag that can be used by all the architectures instead of touching all the archs. Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Brian Geffon <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Bobby Powers <[email protected]> Cc: Denis Plotnikov <[email protected]> Cc: "Dr . David Alan Gilbert" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Martin Cracauer <[email protected]> Cc: Marty McFadden <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Maya Gokhale <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Emelyanov <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-02sh/mm: use helper fault_signal_pending()Peter Xu1-5/+5
Let SH to use the new fault_signal_pending() helper. Here we'll need to move the up_read() out because that's actually needed as long as !RETRY cases. At the meantime we can drop all the rest of up_read()s now (which seems to be cleaner). Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Brian Geffon <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Bobby Powers <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Denis Plotnikov <[email protected]> Cc: "Dr . David Alan Gilbert" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Martin Cracauer <[email protected]> Cc: Marty McFadden <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Maya Gokhale <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Emelyanov <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-02asm-generic: make more kernel-space headers mandatoryMasahiro Yamada1-16/+0
Change a header to mandatory-y if both of the following are met: [1] At least one architecture (except um) specifies it as generic-y in arch/*/include/asm/Kbuild [2] Every architecture (except um) either has its own implementation (arch/*/include/asm/*.h) or specifies it as generic-y in arch/*/include/asm/Kbuild This commit was generated by the following shell script. ----------------------------------->8----------------------------------- arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d') tmpfile=$(mktemp) grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile find arch -path 'arch/*/include/asm/Kbuild' | xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u | while read header do mandatory=yes for arch in $arches do if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild && ! [ -f arch/$arch/include/asm/$header ]; then mandatory=no break fi done if [ "$mandatory" = yes ]; then echo "mandatory-y += $header" >> $tmpfile for arch in $arches do sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild done fi done sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild LANG=C sort $tmpfile >> include/asm-generic/Kbuild ----------------------------------->8----------------------------------- One obvious benefit is the diff stat: 25 files changed, 52 insertions(+), 557 deletions(-) It is tedious to list generic-y for each arch that needs it. So, mandatory-y works like a fallback default (by just wrapping asm-generic one) when arch does not have a specific header implementation. See the following commits: def3f7cefe4e81c296090e1722a76551142c227c a1b39bae16a62ce4aae02d958224f19316d98b24 It is tedious to convert headers one by one, so I processed by a shell script. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Michal Simek <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Arnd Bergmann <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-01Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "My attempt to revitalize trivial queue I've been neglecting for years (what a disaster that was for this world, right? :) ) with patches collected from backlog that were still relevant and not applied elsewhere in the meantime" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: err.h: remove deprecated PTR_RET for good blk-mq: Fix typo in comment x86/boot: Fix comment spelling sh: mach-highlander: Fix comment spelling s390/dasd: Fix comment spelling mfd: wm8994: Fix comment spelling docs: Add reference in binfmt-misc.rst genirq: fix kerneldoc comment for irq_desc drm/amdgpu: fix two documentation mismatch issues HID: fix Kconfig word ordering list/hashtable: minor documentation corrections.
2020-03-31Merge tag 'kbuild-v5.7' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Build system: - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a fixed set of export symbols for Generic Kernel Image (GKI) - allow to run 'make dt_binding_check' without .config - use full schema for checking DT examples in *.yaml files - make modpost fail for missing MODULE_IMPORT_NS(), which makes more sense because we know the produced modules are never loadable - Remove unused 'AS' variable Kconfig: - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files - relax the 'imply' behavior so that symbols implied by 'y' can become 'm' - make 'imply' obey 'depends on' in order to make 'imply' really weak Misc: - add documentation on building the kernel with Clang/LLVM - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen() - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n - various script and Makefile cleanups" * tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) Makefile: Update kselftest help information kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset kbuild: add outputmakefile to no-dot-config-targets kbuild: remove AS variable net: wan: wanxl: refactor the firmware rebuild rule net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware kbuild: add comment about grouped target kbuild: add -Wall to KBUILD_HOSTCXXFLAGS kconfig: remove unused variable in qconf.cc sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc kbuild: refactor Makefile.dtbinst more kbuild: compute the dtbs_install destination more simply Makefile: disallow data races on gcc-10 as well kconfig: make 'imply' obey the direct dependency kconfig: allow symbols implied by y to become m net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report() modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n modpost: rework and consolidate logging interface kbuild: allow to run dt_binding_check without kernel configuration ...
2020-03-30Merge tag 'irq-core-2020-03-30' of ↵Linus Torvalds2-18/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Treewide: - Cleanup of setup_irq() which is not longer required because the memory allocator is available early. Most cleanup changes come through the various maintainer trees, so the final removal of setup_irq() is postponed towards the end of the merge window. Core: - Protection against unsafe invocation of interrupt handlers and unsafe interrupt injection including a fixup of the offending PCI/AER error injection mechanism. Invoking interrupt handlers from arbitrary contexts, i.e. outside of an actual interrupt, can cause inconsistent state on the fragile x86 interrupt affinity changing hardware trainwreck. Drivers: - Second wave of support for the new ARM GICv4.1 - Multi-instance support for Xilinx and PLIC interrupt controllers - CPU-Hotplug support for PLIC - The obligatory new driver for X1000 TCU - Enhancements, cleanups and fixes all over the place" * tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) unicore32: Replace setup_irq() by request_irq() sh: Replace setup_irq() by request_irq() hexagon: Replace setup_irq() by request_irq() c6x: Replace setup_irq() by request_irq() alpha: Replace setup_irq() by request_irq() irqchip/gic-v4.1: Eagerly vmap vPEs irqchip/gic-v4.1: Add VSGI property setup irqchip/gic-v4.1: Add VSGI allocation/teardown irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks irqchip/gic-v4.1: Add initial SGI configuration irqchip/gic-v4.1: Plumb skeletal VSGI irqchip irqchip/stm32: Retrigger both in eoi and unmask callbacks irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain irqchip/xilinx: Do not call irq_set_default_host() irqchip/xilinx: Enable generic irq multi handler irqchip/xilinx: Fill error code when irq domain registration fails irqchip/xilinx: Add support for multiple instances ...
2020-03-29sh: Replace setup_irq() by request_irq()afzal mohammed2-18/+9
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. setup_irq() was required in older kernels as the memory allocator was not available during early boot. Hence replace setup_irq() by request_irq(). Signed-off-by: afzal mohammed <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/b060312689820559121ee0a6456bbc1202fb7ee5.1585320721.git.afzal.mohd.ma@gmail.com
2020-03-27sh: no need of access_ok() in arch_futex_atomic_op_inuser()Al Viro1-3/+0
everything it uses is doing access_ok() already Signed-off-by: Al Viro <[email protected]>
2020-03-27futex: arch_futex_atomic_op_inuser() calling conventions changeAl Viro1-3/+2
Move access_ok() in and pagefault_enable()/pagefault_disable() out. Mechanical conversion only - some instances don't really need a separate access_ok() at all (e.g. the ones only using get_user()/put_user(), or architectures where access_ok() is always true); we'll deal with that in followups. Signed-off-by: Al Viro <[email protected]>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada4-0/+4
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17sh: mach-highlander: Fix comment spellingGeert Uytterhoeven1-2/+2
Fix misspellings of "Connector". Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2020-03-03kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LISTMasahiro Yamada1-5/+0
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options. When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found. I do not see much sense in the last two lines in DEFCONFIG_LIST. [1] ARCH_DEFCONFIG The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless. arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage. Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". [2] arch/$(ARCH)/defconfig This file path is no longer valid. The defconfig files are always located in the arch configs/ directories. $ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary. I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig. Signed-off-by: Masahiro Yamada <[email protected]>
2020-02-24scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabledDiego Elio Pettenò1-1/+0
This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Jens Axboe <[email protected]> Signed-off-by: Diego Elio Pettenò <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-9/+8
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [[email protected]: fix drivers/isdn/capi/kcapi_proc.c] [[email protected]: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-29Merge tag 'threads-v5.6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread management updates from Christian Brauner: "Sargun Dhillon over the last cycle has worked on the pidfd_getfd() syscall. This syscall allows for the retrieval of file descriptors of a process based on its pidfd. A task needs to have ptrace_may_access() permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and Andy) on the target. One of the main use-cases is in combination with seccomp's user notification feature. As a reminder, seccomp's user notification feature was made available in v5.0. It allows a task to retrieve a file descriptor for its seccomp filter. The file descriptor is usually handed of to a more privileged supervising process. The supervisor can then listen for syscall events caught by the seccomp filter of the supervisee and perform actions in lieu of the supervisee, usually emulating syscalls. pidfd_getfd() is needed to expand its uses. There are currently two major users that wait on pidfd_getfd() and one future user: - Netflix, Sargun said, is working on a service mesh where users should be able to connect to a dns-based VIP. When a user connects to e.g. 1.2.3.4:80 that runs e.g. service "foo" they will be redirected to an envoy process. This service mesh uses seccomp user notifications and pidfd to intercept all connect calls and instead of connecting them to 1.2.3.4:80 connects them to e.g. 127.0.0.1:8080. - LXD uses the seccomp notifier heavily to intercept and emulate mknod() and mount() syscalls for unprivileged containers/processes. With pidfd_getfd() more uses-cases e.g. bridging socket connections will be possible. - The patchset has also seen some interest from the browser corner. Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a broker process. In the future glibc will start blocking all signals during dlopen() rendering this type of sandbox impossible. Hence, in the future Firefox will switch to a seccomp-user-nofication based sandbox which also makes use of file descriptor retrieval. The thread for this can be found at https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html With pidfd_getfd() it is e.g. possible to bridge socket connections for the supervisee (binding to a privileged port) and taking actions on file descriptors on behalf of the supervisee in general. Sargun's first version was using an ioctl on pidfds but various people pushed for it to be a proper syscall which he duely implemented as well over various review cycles. Selftests are of course included. I've also added instructions how to deal with merge conflicts below. There's also a small fix coming from the kernel mentee project to correctly annotate struct sighand_struct with __rcu to fix various sparse warnings. We've received a few more such fixes and even though they are mostly trivial I've decided to postpone them until after -rc1 since they came in rather late and I don't want to risk introducing build warnings. Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is needed to avoid allocation recursions triggerable by storage drivers that have userspace parts that run in the IO path (e.g. dm-multipath, iscsi, etc). These allocation recursions deadlock the device. The new prctl() allows such privileged userspace components to avoid allocation recursions by setting the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE flags. The patch carries the necessary acks from the relevant maintainers and is routed here as part of prctl() thread-management." * tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim sched.h: Annotate sighand_struct with __rcu test: Add test for pidfd getfd arch: wire up pidfd_getfd syscall pid: Implement pidfd_getfd syscall vfs, fdtable: Add fget_task helper
2020-01-29Merge tag 'y2038-drivers-for-v5.6-signed' of ↵Linus Torvalds1-2/+2
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "Core, driver and file system changes These are updates to device drivers and file systems that for some reason or another were not included in the kernel in the previous y2038 series. I've gone through all users of time_t again to make sure the kernel is in a long-term maintainable state, replacing all remaining references to time_t with safe alternatives. Some related parts of the series were picked up into the nfsd, xfs, alsa and v4l2 trees. A final set of patches in linux-mm removes the now unused time_t/timeval/timespec types and helper functions after all five branches are merged for linux-5.6, ensuring that no new users get merged. As a result, linux-5.6, or my backport of the patches to 5.4 [1], should be the first release that can serve as a base for a 32-bit system designed to run beyond year 2038, with a few remaining caveats: - All user space must be compiled with a 64-bit time_t, which will be supported in the coming musl-1.2 and glibc-2.32 releases, along with installed kernel headers from linux-5.6 or higher. - Applications that use the system call interfaces directly need to be ported to use the time64 syscalls added in linux-5.1 in place of the existing system calls. This impacts most users of futex() and seccomp() as well as programming languages that have their own runtime environment not based on libc. - Applications that use a private copy of kernel uapi header files or their contents may need to update to the linux-5.6 version, in particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h, linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h. - A few remaining interfaces cannot be changed to pass a 64-bit time_t in a compatible way, so they must be configured to use CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit timestamps. Most importantly this impacts all users of 'struct input_event'. - All y2038 problems that are present on 64-bit machines also apply to 32-bit machines. In particular this affects file systems with on-disk timestamps using signed 32-bit seconds: ext4 with ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs" [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame * tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits) Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC" y2038: sh: remove timeval/timespec usage from headers y2038: sparc: remove use of struct timex y2038: rename itimerval to __kernel_old_itimerval y2038: remove obsolete jiffies conversion functions nfs: fscache: use timespec64 in inode auxdata nfs: fix timstamp debug prints nfs: use time64_t internally sunrpc: convert to time64_t for expiry drm/etnaviv: avoid deprecated timespec drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC drm/msm: avoid using 'timespec' hfs/hfsplus: use 64-bit inode timestamps hostfs: pass 64-bit timestamps to/from user space packet: clarify timestamp overflow tsacct: add 64-bit btime field acct: stop using get_seconds() um: ubd: use 64-bit time_t where possible xtensa: ISS: avoid struct timeval dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD ...
Powered by cgit, Gruvboxed by Blaster4385.