| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Based on 1 normalized pattern(s):
released under the terms of the gnu gpl v2 0
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Steve Winslow <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.
The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.
The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:
force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
The force_sig_info_fault function is always called with tsk == current.
Make that explicit by removing the tsk parameter.
This also makes it clear that the sh force_sig_info_fault passes
current into force_sig_fault.
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Since commit dccd2304cc90 ("ARM: 7430/1: sizes.h: move from asm-generic
to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just
wrappers of <linux/sizes.h>.
This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to
prepare for the removal.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
All callers of arch_remove_memory() ignore errors. And we should really
try to remove any errors from the memory removal path. No more errors are
reported from __remove_pages(). BUG() in s390x code in case
arch_remove_memory() is triggered. We may implement that properly later.
WARN in case powerpc code failed to remove the section mapping, which is
better than ignoring the error completely right now.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Arun KS <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Qian Cai <[email protected]>
Cc: Mathieu Malaterre <[email protected]>
Cc: Andrew Banman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Travis <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
arch_add_memory, __add_pages take a want_memblock which controls whether
the newly added memory should get the sysfs memblock user API (e.g.
ZONE_DEVICE users do not want/need this interface). Some callers even
want to control where do we allocate the memmap from by configuring
altmap.
Add a more generic hotplug context for arch_add_memory and __add_pages.
struct mhp_restrictions contains flags which contains additional features
to be enabled by the memory hotplug (MHP_MEMBLOCK_API currently) and
altmap for alternative memmap allocator.
This patch shouldn't introduce any functional change.
[[email protected]: build fix]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Oscar Salvador <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "provide a generic free_initmem implementation", v2.
Many architectures implement free_initmem() in exactly the same or very
similar way: they wrap the call to free_initmem_default() with sometimes
different 'poison' parameter.
These patches switch those architectures to use a generic implementation
that does free_initmem_default(POISON_FREE_INITMEM).
This was inspired by Christoph's patches for free_initrd_mem [1] and I
shamelessly copied changelog entries from his patches :)
[1] https://lore.kernel.org/lkml/[email protected]/
This patch (of 2):
For most architectures free_initmem just a wrapper for the same
free_initmem_default(-1) call. Provide that as a generic implementation
marked __weak.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Richard Kuo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
For most architectures free_initrd_mem just expands to the same
free_reserved_area call. Provide that as a generic implementation marked
__weak.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]> [m68k]
Acked-by: Mike Rapoport <[email protected]>
Cc: Catalin Marinas <[email protected]> [arm64]
Cc: Steven Price <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
To facilitate additional options to get_user_pages_fast() change the
singular write parameter to be gup_flags.
This patch does not change any functionality. New functionality will
follow in subsequent patches.
Some of the get_user_pages_fast() call sites were unchanged because they
already passed FOLL_WRITE or 0 for the write parameter.
NOTE: It was suggested to change the ordering of the get_user_pages_fast()
arguments to ensure that callers were converted. This breaks the current
GUP call site convention of having the returned pages be the final
parameter. So the suggestion was rejected.
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ira Weiny <[email protected]>
Reviewed-by: Mike Marshall <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Petr Mladek <[email protected]> [printk]
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Guo Ren <[email protected]> [c-sky]
Cc: Heiko Carstens <[email protected]>
Cc: Juergen Gross <[email protected]> [Xen]
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error. The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.
The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.
@@
expression ptr, size, align;
@@
ptr = memblock_alloc(size, align);
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);
[[email protected]: use '%pa' with 'phys_addr_t' type]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix format strings for panics after memblock_alloc]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: don't panic if the allocation in sparse_buffer_init fails]
Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[[email protected]: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Guo Ren <[email protected]> [c-sky]
Acked-by: Paul Burton <[email protected]> [MIPS]
Acked-by: Heiko Carstens <[email protected]> [s390]
Reviewed-by: Juergen Gross <[email protected]> [Xen]
Reviewed-by: Geert Uytterhoeven <[email protected]> [m68k]
Acked-by: Max Filippov <[email protected]> [xtensa]
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Rather than use the memblock_alloc_base that returns a physical address
and then convert this address to the virtual one, use appropriate
memblock function that returns a virtual address.
There is a small functional change in the allocation of then
NODE_DATA(). Instead of panicing if the local allocation failed, the
non-local allocation attempt will be made.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "Do not touch pages in hot-remove path", v2.
This patchset aims for two things:
1) A better definition about offline and hot-remove stage
2) Solving bugs where we can access non-initialized pages
during hot-remove operations [2] [3].
This is achieved by moving all page/zone handling to the offline
stage, so we do not need to access pages when hot-removing memory.
[1] https://patchwork.kernel.org/cover/10691415/
[2] https://patchwork.kernel.org/patch/10547445/
[3] https://www.spinics.net/lists/linux-mm/msg161316.html
This patch (of 5):
This is a preparation for the following-up patches. The idea of passing
the nid is that it will allow us to get rid of the zone parameter
afterwards.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Oscar Salvador <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Pavel Tatashin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[[email protected]: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Serge Semin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The conversion is done using
sed -i 's@free_all_bootmem@memblock_free_all@' \
$(git grep -l free_all_bootmem)
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Serge Semin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The alloc_bootmem_pages() function allocates PAGE_SIZE aligned memory.
memblock_alloc() with alignment set to PAGE_SIZE does exactly the same
thing.
The conversion is done using the following semantic patch:
@@
expression e;
@@
- alloc_bootmem_pages(e)
+ memblock_alloc(e, PAGE_SIZE)
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Serge Semin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t")
In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.
Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: "Levin, Alexander (Sasha Levin)" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig consolidation from Masahiro Yamada:
"Consolidation of Kconfig files by Christoph Hellwig.
Move the source statements of arch-independent Kconfig files instead
of duplicating the includes in every arch/$(SRCARCH)/Kconfig"
* tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: add a Memory Management options" menu
kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
kconfig: use a menu in arch/Kconfig to reduce clutter
kconfig: include kernel/Kconfig.preempt from init/Kconfig
Kconfig: consolidate the "Kernel hacking" menu
kconfig: include common Kconfig files from top-level Kconfig
kconfig: remove duplicate SWAP symbol defintions
um: create a proper drivers Kconfig
um: cleanup Kconfig files
um: stop abusing KBUILD_KCONFIG
|
|
Half of the file just contains platform device memory setup code which
is required for all builds, and half contains helpers for dma coherent
allocation, which is only needed if CONFIG_DMA_NONCOHERENT is enabled.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Yoshinori Sato <[email protected]>
|
|
And use it in the maple bus code to avoid a dma API dependency.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Yoshinori Sato <[email protected]>
|
|
Remove the indirection through the dma_ops variable, and just return
nommu_dma_ops directly from get_arch_dma_ops.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Yoshinori Sato <[email protected]>
|
|
Instead of duplicating the source statements in every architecture just
do it once in the toplevel Kconfig file.
Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
the top-level Kconfig into arch/Kconfig so that don't violate ordering
constraits while keeping a sensible menu structure.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- replace the force_dma flag with a dma_configure bus method. (Nipun
Gupta, although one patch is іncorrectly attributed to me due to a
git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few
cleanups to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
dma-direct: don't crash on device without dma_mask
nds32: use generic dma_noncoherent_ops
nds32: implement the unmap_sg DMA operation
nds32: consolidate DMA cache maintainance routines
x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
x86/pci-dma: remove the explicit nodac and allowdac option
x86/pci-dma: remove the experimental forcesac boot option
Documentation/x86: remove a stray reference to pci-nommu.c
core, dma-direct: add a flag 32-bit dma limits
dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
dma-debug: check scatterlist segments
c6x: use generic dma_noncoherent_ops
arc: use generic dma_noncoherent_ops
arc: fix arc_dma_{map,unmap}_page
arc: fix arc_dma_sync_sg_for_{cpu,device}
arc: simplify arc_dma_sync_single_for_{cpu,device}
dma-mapping: provide a generic dma-noncoherent implementation
dma-mapping: simplify Kconfig dependencies
riscv: add swiotlb support
riscv: only enable ZONE_DMA32 for 64-bit
...
|
|
Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
inadvertently switched the DT unflattening allocations from memblock to
bootmem which doesn't work because the unflattening happens before
bootmem is initialized. Swapping the order of bootmem init and
unflattening could also fix this, but removing bootmem is desired. So
enable NO_BOOTMEM on SH like other architectures have done.
Fixes: 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
Reported-by: Rich Felker <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
|
|
Most mainstream architectures are using 65536 entries, so lets stick to
that. If someone is really desperate to override it that can still be
done through <asm/dma-mapping.h>, but I'd rather see a really good
rationale for that.
dma_debug_init is now called as a core_initcall, which for many
architectures means much earlier, and provides dma-debug functionality
earlier in the boot process. This should be safe as it only relies
on the memory allocator already being available.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Marek Szyprowski <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
|
|
With commit ce88313069c36eef80f21fd7 ("arch/sh: make the DMA mapping
operations observe dev->dma_pfn_offset") the generic DMA allocation
function on which the SH 'dma_alloc_coherent()' function relies on,
accesses the 'dma_pfn_offset' field of struct device.
Unfortunately the 'dma_generic_alloc_coherent()' function is called from
several places with a NULL struct device argument, halting the CPU
during the boot process.
This patch fixes the issue by protecting access to dev->dma_pfn_offset,
with a trivial check for validity. It also passes a valid 'struct device'
in the 'platform_resource_setup_memory()' function which is the main user
of 'dma_alloc_coherent()', and inserts a WARN_ON() check to remind to future
(and existing) bogus users of this function to provide a valid 'struct device'
whenever possible.
Fixes: ce88313069c36eef80f21fd7 ("arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset")
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
|
|
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.
Simplify this process by using the helper force_sig_fault. Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.
In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: [email protected]
Acked-by: Rich Felker <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.
Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.
The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.
In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.
Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
Merge yet more updates from Andrew Morton:
- various hotfixes
- kexec_file updates and feature work
* emailed patches from Andrew Morton <[email protected]>: (27 commits)
kernel/kexec_file.c: move purgatories sha256 to common code
kernel/kexec_file.c: allow archs to set purgatory load address
kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load
kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs
kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs
kernel/kexec_file.c: split up __kexec_load_puragory
kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations*
kernel/kexec_file.c: search symbols in read-only kexec_purgatory
kernel/kexec_file.c: make purgatory_info->ehdr const
kernel/kexec_file.c: remove checks in kexec_purgatory_load
include/linux/kexec.h: silence compile warnings
kexec_file, x86: move re-factored code to generic side
x86: kexec_file: clean up prepare_elf64_headers()
x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer
x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers()
x86: kexec_file: purge system-ram walking from prepare_elf64_headers()
kexec_file,x86,powerpc: factor out kexec_file_ops functions
kexec_file: make use of purgatory optional
proc: revalidate misc dentries
mm, slab: reschedule cache_reap() on the same CPU
...
|
|
__get_user_pages_fast handles errors differently from
get_user_pages_fast: the former always returns the number of pages
pinned, the later might return a negative error code.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thorsten Leemhuis <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull arch/sh updates from Rich Felker:
"Fixes for bugs in futex, device tree, and userspace breakpoint traps,
and for PCI issues on SH7786"
* tag 'sh-for-4.17' of git://git.libc.org/linux-sh:
arch/sh: pcie-sh7786: handle non-zero DMA offset
arch/sh: pcie-sh7786: adjust the memory mapping
arch/sh: pcie-sh7786: adjust PCI MEM and IO regions
arch/sh: pcie-sh7786: exclude unusable PCI MEM areas
arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled
arch/sh: pci: don't use disabled resources
arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset
arch/sh: add sh7786_mm_sel() function
sh: fix debug trap failure to process signals before return to user
sh: fix memory corruption of unflattened device tree
sh: fix futex FUTEX_OP_SET op on userspace addresses
|
|
Some devices may have a non-zero DMA offset, i.e an offset between the
DMA address and the physical address. Such an offset can be encoded
into the dma_pfn_offset field of "struct device", but the SuperH
implementation of the DMA mapping API does not observe this
information.
This commit fixes that by ensuring the DMA address is properly
calculated depending on this DMA offset.
Signed-off-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
|
|
Thanks to commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB
trunks"), after swapoff the address_space associated with the swap
device will be freed. So page_mapping() users which may touch the
address_space need some kind of mechanism to prevent the address_space
from being freed during accessing.
The dcache flushing functions (flush_dcache_page(), etc) in architecture
specific code may access the address_space of swap device for anonymous
pages in swap cache via page_mapping() function. But in some cases
there are no mechanisms to prevent the swap device from being swapoff,
for example,
CPU1 CPU2
__get_user_pages() swapoff()
flush_dcache_page()
mapping = page_mapping()
... exit_swap_address_space()
... kvfree(spaces)
mapping_mapped(mapping)
The address space may be accessed after being freed.
But from cachetlb.txt and Russell King, flush_dcache_page() only care
about file cache pages, for anonymous pages, flush_anon_page() should be
used. The implementation of flush_dcache_page() in all architectures
follows this too. They will check whether page_mapping() is NULL and
whether mapping_mapped() is true to determine whether to flush the
dcache immediately. And they will use interval tree (mapping->i_mmap)
to find all user space mappings. While mapping_mapped() and
mapping->i_mmap isn't used by anonymous pages in swap cache at all.
So, to fix the race between swapoff and flush dcache, __page_mapping()
is add to return the address_space for file cache pages and NULL
otherwise. All page_mapping() invoking in flush dcache functions are
replaced with page_mapping_file().
[[email protected]: simplify page_mapping_file(), per Mike]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Chen Liqin <[email protected]>
Cc: Russell King <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We can just pass this on instead of having to do a radix tree lookup
without proper locking 2 levels into the callchain.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
We can just pass this on instead of having to do a radix tree lookup
without proper locking 2 levels into the callchain.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
Only x86_64 and sh export this symbol, and it is not used by any
modular code.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture doesn't
support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: turn dma_cache_sync into a dma_map_ops method
sh: make dma_cache_sync a no-op
xtensa: make dma_cache_sync a no-op
unicore32: make dma_cache_sync a no-op
powerpc: make dma_cache_sync a no-op
mn10300: make dma_cache_sync a no-op
microblaze: make dma_cache_sync a no-op
ia64: make dma_cache_sync a no-op
frv: make dma_cache_sync a no-op
x86: make dma_cache_sync a no-op
floppy: consolidate the dummy fd_cacheflush definition
drivers: flag buses which demand DMA configuration
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
sh does not implement DMA_ATTR_NON_CONSISTENT allocations, so it doesn't
make any sense to do any work in dma_cache_sync given that it
must be a no-op when dma_alloc_attrs returns coherent memory.
On the other hand sh uses dma_cache_sync internally in the dma_ops
implementation and for the maple bus that does not use the DMA API,
so a the old functionality for dma_cache_sync is still provided under
the name sh_sync_dma_for_device, and without the redundant dev
argument. While at it two of the syncing dma_ops also go the proper
_for_device postfix.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
|
|
Make the code like the rest of the kernel.
Link: http://lkml.kernel.org/r/f81bb2a67a97b1fd8b6ea99bd350d8a0f6864fb1.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
[[email protected]: v3: fix arch specific implementations]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Meyer <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
A poisoned or migrated hugepage is stored as a swap entry in the page
tables. On architectures that support hugepages consisting of
contiguous page table entries (such as on arm64) this leads to ambiguity
in determining the page table entry to return in huge_pte_offset() when
a poisoned entry is encountered.
Let's remove the ambiguity by adding a size parameter to convey
additional information about the requested address. Also fixup the
definition/usage of huge_pte_offset() throughout the tree.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Punit Agrawal <[email protected]>
Acked-by: Steve Capper <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: James Hogan <[email protected]> (odd fixer:METAG ARCHITECTURE)
Cc: Ralf Baechle <[email protected]> (supporter:MIPS)
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: "Aneesh Kumar K.V" <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
arch_add_memory gets for_device argument which then controls whether we
want to create memblocks for created memory sections. Simplify the
logic by telling whether we want memblocks directly rather than going
through pointless negation. This also makes the api easier to
understand because it is clear what we want rather than nothing telling
for_device which can mean anything.
This shouldn't introduce any functional change.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Tested-by: Dan Williams <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Daniel Kiper <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Igor Mammedov <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Reza Arbab <[email protected]>
Cc: Tobias Regnery <[email protected]>
Cc: Toshi Kani <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Cc: Xishi Qiu <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The current memory hotplug implementation relies on having all the
struct pages associate with a zone/node during the physical hotplug
phase (arch_add_memory->__add_pages->__add_section->__add_zone). In the
vast majority of cases this means that they are added to ZONE_NORMAL.
This has been so since 9d99aaa31f59 ("[PATCH] x86_64: Support memory
hotadd without sparsemem") and it wasn't a big deal back then because
movable onlining didn't exist yet.
Much later memory hotplug wanted to (ab)use ZONE_MOVABLE for movable
onlining 511c2aba8f07 ("mm, memory-hotplug: dynamic configure movable
memory and portion memory") and then things got more complicated.
Rather than reconsidering the zone association which was no longer
needed (because the memory hotplug already depended on SPARSEMEM) a
convoluted semantic of zone shifting has been developed. Only the
currently last memblock or the one adjacent to the zone_movable can be
onlined movable. This essentially means that the online type changes as
the new memblocks are added.
Let's simulate memory hot online manually
$ echo 0x100000000 > /sys/devices/system/memory/probe
$ grep . /sys/devices/system/memory/memory32/valid_zones
Normal Movable
$ echo $((0x100000000+(128<<20))) > /sys/devices/system/memory/probe
$ grep . /sys/devices/system/memory/memory3?/valid_zones
/sys/devices/system/memory/memory32/valid_zones:Normal
/sys/devices/system/memory/memory33/valid_zones:Normal Movable
$ echo $((0x100000000+2*(128<<20))) > /sys/devices/system/memory/probe
$ grep . /sys/devices/system/memory/memory3?/valid_zones
/sys/devices/system/memory/memory32/valid_zones:Normal
/sys/devices/system/memory/memory33/valid_zones:Normal
/sys/devices/system/memory/memory34/valid_zones:Normal Movable
$ echo online_movable > /sys/devices/system/memory/memory34/state
$ grep . /sys/devices/system/memory/memory3?/valid_zones
/sys/devices/system/memory/memory32/valid_zones:Normal
/sys/devices/system/memory/memory33/valid_zones:Normal Movable
/sys/devices/system/memory/memory34/valid_zones:Movable Normal
This is an awkward semantic because an udev event is sent as soon as the
block is onlined and an udev handler might want to online it based on
some policy (e.g. association with a node) but it will inherently race
with new blocks showing up.
This patch changes the physical online phase to not associate pages with
any zone at all. All the pages are just marked reserved and wait for
the onlining phase to be associated with the zone as per the online
request. There are only two requirements
- existing ZONE_NORMAL and ZONE_MOVABLE cannot overlap
- ZONE_NORMAL precedes ZONE_MOVABLE in physical addresses
the latter one is not an inherent requirement and can be changed in the
future. It preserves the current behavior and made the code slightly
simpler. This is subject to change in future.
This means that the same physical online steps as above will lead to the
following state: Normal Movable
/sys/devices/system/memory/memory32/valid_zones:Normal Movable
/sys/devices/system/memory/memory33/valid_zones:Normal Movable
/sys/devices/system/memory/memory32/valid_zones:Normal Movable
/sys/devices/system/memory/memory33/valid_zones:Normal Movable
/sys/devices/system/memory/memory34/valid_zones:Normal Movable
/sys/devices/system/memory/memory32/valid_zones:Normal Movable
/sys/devices/system/memory/memory33/valid_zones:Normal Movable
/sys/devices/system/memory/memory34/valid_zones:Movable
Implementation:
The current move_pfn_range is reimplemented to check the above
requirements (allow_online_pfn_range) and then updates the respective
zone (move_pfn_range_to_zone), the pgdat and links all the pages in the
pfn range with the zone/node. __add_pages is updated to not require the
zone and only initializes sections in the range. This allowed to
simplify the arch_add_memory code (s390 could get rid of quite some of
code).
devm_memremap_pages is the only user of arch_add_memory which relies on
the zone association because it only hooks into the memory hotplug only
half way. It uses it to associate the new memory with ZONE_DEVICE but
doesn't allow it to be {on,off}lined via sysfs. This means that this
particular code path has to call move_pfn_range_to_zone explicitly.
The original zone shifting code is kept in place and will be removed in
the follow up patch for an easier review.
Please note that this patch also changes the original behavior when
offlining a memory block adjacent to another zone (Normal vs. Movable)
used to allow to change its movable type. This will be handled later.
[[email protected]: simplify zone_intersects()]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: remove duplicate call for set_page_links]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: remove unused local `i']
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Wei Yang <[email protected]>
Tested-by: Dan Williams <[email protected]>
Tested-by: Reza Arbab <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # For s390 bits
Acked-by: Vlastimil Babka <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Daniel Kiper <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Igor Mammedov <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Tobias Regnery <[email protected]>
Cc: Toshi Kani <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Cc: Xishi Qiu <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Device memory hotplug hooks into regular memory hotplug only half way.
It needs memory sections to track struct pages but there is no
need/desire to associate those sections with memory blocks and export
them to the userspace via sysfs because they cannot be onlined anyway.
This is currently expressed by for_device argument to arch_add_memory
which then makes sure to associate the given memory range with
ZONE_DEVICE. register_new_memory then relies on is_zone_device_section
to distinguish special memory hotplug from the regular one. While this
works now, later patches in this series want to move __add_zone outside
of arch_add_memory path so we have to come up with something else.
Add want_memblock down the __add_pages path and use it to control
whether the section->memblock association should be done.
arch_add_memory then just trivially want memblock for everything but
for_device hotplug.
remove_memory_section doesn't need is_zone_device_section either. We
can simply skip all the memblock specific cleanup if there is no
memblock for the given section.
This shouldn't introduce any functional change.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Tested-by: Dan Williams <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Daniel Kiper <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Igor Mammedov <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Reza Arbab <[email protected]>
Cc: Tobias Regnery <[email protected]>
Cc: Toshi Kani <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Cc: Xishi Qiu <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|