aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/kernel/cpu
AgeCommit message (Collapse)AuthorFilesLines
2010-10-13sh: perf: Support SH-X3 hardware counters.Paul Mundt1-1/+19
The PMCAT location has conveniently moved on newer SH-X3 parts, special case this for now with a note. This will probably want to be redone in a less visually offensive way when/if more information becomes available. Signed-off-by: Paul Mundt <[email protected]>
2010-10-05sh: Wire up INTC subgroup splitting for SH7786 SCIF1.Paul Mundt1-38/+72
SH7786 is the big user for subgroup splitting, mostly for the PCIe block, but those will follow later. For now we simply split up SCIF1, as used by the serial console on SDK7786 and others. Signed-off-by: Paul Mundt <[email protected]>
2010-10-04sh: Drop __initdata for SH-X3 pinmux tables.Paul Mundt1-5/+5
The gpio sysfs support needs to get at these later, so drop the __initdata annotations. Signed-off-by: Paul Mundt <[email protected]>
2010-10-02sh: Support early IRQ vector map reservation for delayed controllers.Paul Mundt1-0/+3
Some controllers will need to be initialized lazily due to pinmux constraints, while others may simply have no need to be brought online if there are no backing devices for them attached. In this case it's still necessary to be able to reserve their hardware vector map before dynamic IRQs get a hold of them. Signed-off-by: Paul Mundt <[email protected]>
2010-10-02sh: Handle pinmux for SH-X3 proto IRQ/IRL modes.Paul Mundt1-0/+24
The SH-X3 proto CPU has all of the external IRQ and IRL pins muxed, make sure that we're able to grab them before attempting to register their respective IRQ controllers. Signed-off-by: Paul Mundt <[email protected]>
2010-10-02sh: pinmux support for SH-X3 proto CPUs.Paul Mundt2-0/+588
This adds in support for GPIO/pinmux on the SH-X3 proto CPUs. This will subsequently be used by the x3proto board. Signed-off-by: Paul Mundt <[email protected]>
2010-10-02sh: Support IRQ balancing for SH-X3 proto cores, too.Paul Mundt1-4/+11
This adds in hardware IRQ auto-distribution support for SH-X3 proto CPUs, following the SH7786 support. Signed-off-by: Paul Mundt <[email protected]>
2010-10-02sh: Support userimask for all SH-X3 interrupt controllers.Paul Mundt3-18/+36
This shuffles some of the shared bits out of the 7786 code and in to a shared SH-X3 support file. Presently just for userimask, but also a good place for the IRQ balancing wrappers. Signed-off-by: Paul Mundt <[email protected]>
2010-10-01sh: Update SH-X3 subtype for clkdev lookups.Paul Mundt1-83/+142
Rewrite the SH-X3 proto CPU clock framework for clkdev. Signed-off-by: Paul Mundt <[email protected]>
2010-09-19sh: fix an SIU device name mismatchGuennadi Liakhovetski1-1/+1
Recent ASoC changes unified all PCM names, fix the platform code to match. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2010-08-04sh: Add sh7724 BEU resourcesPhil Edworthy1-0/+66
Signed-off-by: Phil Edworthy <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-07-06sh: modify clock framework of SH7757Yoshihiro Shimoda1-88/+111
Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-07-06sh: modify pinmux for SH7757 2nd cutYoshihiro Shimoda1-657/+925
Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-07-06sh: add some INTC_VECT for setup-sh7757Yoshihiro Shimoda1-69/+147
Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-07-06sh: fix the id of scif in setup-sh7757Yoshihiro Shimoda1-3/+3
Because the value of CONFIG_SERIAL_SH_SCI_NR_UARTS is 3. Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-07-06sh: change PVR of SH7757 for 2nd cutYoshihiro Shimoda1-1/+1
All 1st cut silicon in the wild has been replaced by the 2nd cut, so it's safe to replace all of the 1st cut references and support. Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-22sh: fix up sh7786 dmaengine build.Paul Mundt1-1/+1
The asm/dmaengine.h header is gone now, update accordingly. Signed-off-by: Paul Mundt <[email protected]>
2010-05-22sh: add DMA slave definitions to sh7724Guennadi Liakhovetski1-0/+86
Add a list of SCIF and SDHI DMA slave definitions to sh7724. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-22sh: add DMA slaves for two SDHI controllers to sh7722Guennadi Liakhovetski1-0/+10
SuperH SDHI controllers can use DMA, add slave definitions to sh7722. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-22sh: define DMA slaves per CPU type, remove now redundant headerGuennadi Liakhovetski4-5/+3
Now that DMA slave IDs are only used used in platform specific code and have become opaque cookies for the rest of the code, we can make the, CPU specific too. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-22sh: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in arch/sh/kernel/cpu/sh4a/clock-sh7786.c Signed-off-by: Huang Weiyi <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.cMagnus Damm2-296/+1
Move the CPG helpers to drivers/sh/clk-cpg.c V2. This to allow SH-Mobile ARM to share the code with SH. All functions except the legacy CPG stuff is moved. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: move sh clock.c contents to drivers/sh/clk.Magnus Damm1-535/+8
This patch is V2 of the SH clock framework move from arch/sh/kernel/cpu/clock.c to drivers/sh/clk.c. All code except the following functions are moved: clk_init(), clk_get() and clk_put(). The init function is still kept in clock.c since it depends on the SH-specific machvec implementation. The symbols clk_get() and clk_put() already exist in the common ARM clkdev code, those symbols are left in the SH tree to avoid duplicating them for SH-Mobile ARM. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: remove unused clock lookupMagnus Damm1-35/+2
Now when all clocks are registered using clkdev, get rid of the special SH-specific clock lookup. Also ditch the unused module ref counting code. This patch syncs the SH behaviour with ARM. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh4-202 to clkdevMagnus Damm1-4/+13
This patch converts the remaining sh4-202 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch shx3 to clkdevMagnus Damm1-2/+11
This patch converts the remaining shx3 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7757 to clkdevMagnus Damm1-1/+10
This patch converts the remaining sh7757 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7763 to clkdevMagnus Damm1-1/+11
This patch converts the remaining sh7763 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7780 to clkdevMagnus Damm1-1/+11
This patch converts the remaining sh7780 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7786 to clkdevMagnus Damm1-4/+4
This patch converts the remaining sh7786 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7785 to clkdevMagnus Damm1-4/+4
This patch converts the remaining sh7785 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7366 to clkdevMagnus Damm1-8/+6
This patch converts the remaining sh7366 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7343 to clkdevMagnus Damm1-8/+6
This patch converts the remaining sh7343 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7722 to clkdevMagnus Damm1-8/+6
This patch converts the remaining sh7722 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7723 to clkdevMagnus Damm1-8/+6
This patch converts the remaining sh7723 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch sh7724 to clkdevMagnus Damm1-10/+7
This patch converts the remaining sh7724 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: switch legacy clocks to clkdevMagnus Damm1-4/+13
This patch converts the legacy clocks to register using clkdev. Also the clock name is removed. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: get rid of div4 clock nameMagnus Damm7-67/+67
Remove the name parameter from SH_CLK_DIV4() and adjust the processor specific code. The lookup happens using clkdev so the name is unused. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7786 div4 clkdev lookupMagnus Damm1-0/+8
Add sh7786 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7785 div4 clkdev lookupMagnus Damm1-0/+10
Add sh7785 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7366 div4 clkdev lookupMagnus Damm1-0/+10
Add sh7366 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7343 div4 clkdev lookupMagnus Damm1-0/+10
Add sh7343 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7724 div4 clkdev lookupMagnus Damm1-0/+7
Add sh7724 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7723 div4 clkdev lookupMagnus Damm1-0/+11
Add sh7723 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7722 div4 clkdev lookupMagnus Damm1-0/+11
Add sh7722 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: div4 reparent workaroundMagnus Damm1-1/+6
Update the div4 set_parent() callback to use the flags instead of name to determine parent index. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: get rid of mstp32 clock name and idMagnus Damm4-138/+137
Remove the name and the id from SH_CLK_MSTP32(). Now when lookups are handled by clkdev they are not needed anymore. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7786 mstp32 clkdev lookupMagnus Damm1-1/+54
Add sh7786 MSTP clocks to the clkdev lookup table. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7786 mstp32 index reworkMagnus Damm1-43/+51
This patch adds sh7786 MSTP enums for mstp_clks[] index. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-13sh: sh7785 mstp32 clkdev lookupMagnus Damm1-0/+47
Add sh7785 MSTP clocks to the clkdev lookup table. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.