| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Optimize ftrace and kprobes code patching and avoid stop machine for
kprobes if sequential instruction fetching facility is available
- Add hiperdispatch feature to dynamically adjust CPU capacity in
vertical polarization to improve scheduling efficiency and overall
performance. Also add infrastructure for handling warning track
interrupts (WTI), allowing for graceful CPU preemption
- Rework crypto code pkey module and split it into separate,
independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules
to load only when the relevant hardware is available
- Add hardware acceleration for HMAC modes and the full AES-XTS cipher,
utilizing message-security assist extensions (MSA) 10 and 11. It
introduces new shash implementations for HMAC-SHA224/256/384/512 and
registers the hardware-accelerated AES-XTS cipher as the preferred
option. Also add clear key token support
- Add MSA 10 and 11 processor activity instrumentation counters to perf
and update PAI Extension 1 NNPA counters
- Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE
statements
- Add support for SHA3 performance enhancements introduced with MSA 12
- Add support for the query authentication information feature of MSA
13 and introduce the KDSA CPACF instruction. Provide query and query
authentication information in sysfs, enabling tools like cpacfinfo to
present this data in a human-readable form
- Update kernel disassembler instructions
- Always enable EXPOLINE_EXTERN if supported by the compiler to ensure
kpatch compatibility
- Add missing warning handling and relocated lowcore support to the
early program check handler
- Optimize ftrace_return_address() and avoid calling unwinder
- Make modules use kernel ftrace trampolines
- Strip relocs from the final vmlinux ELF file to make it roughly 2
times smaller
- Dump register contents and call trace for early crashes to the
console
- Generate ptdump address marker array dynamically
- Fix rcu_sched stalls that might occur when adding or removing large
amounts of pages at once to or from the CMM balloon
- Fix deadlock caused by recursive lock of the AP bus scan mutex
- Unify sync and async register save areas in entry code
- Cleanup debug prints in crypto code
- Various cleanup and sanitizing patches for the decompressor
- Various small ftrace cleanups
* tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits)
s390/crypto: Display Query and Query Authentication Information in sysfs
s390/crypto: Add Support for Query Authentication Information
s390/crypto: Rework RRE and RRF CPACF inline functions
s390/crypto: Add KDSA CPACF Instruction
s390/disassembler: Remove duplicate instruction format RSY_RDRU
s390/boot: Move boot_printk() code to own file
s390/boot: Use boot_printk() instead of sclp_early_printk()
s390/boot: Rename decompressor_printk() to boot_printk()
s390/boot: Compile all files with the same march flag
s390: Use MARCH_HAS_*_FEATURES defines
s390: Provide MARCH_HAS_*_FEATURES defines
s390/facility: Disable compile time optimization for decompressor code
s390/boot: Increase minimum architecture to z10
s390/als: Remove obsolete comment
s390/sha3: Fix SHA3 selftests failures
s390/pkey: Add AES xts and HMAC clear key token support
s390/cpacf: Add MSA 10 and 11 new PCKMO functions
s390/mm: Add cond_resched() to cmm_alloc/free_pages()
s390/pai_ext: Update PAI extension 1 counters
s390/pai_crypto: Add support for MSA 10 and 11 pai counters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
|
Use the new API that can understand huge pfn mappings.
Link: https://lkml.kernel.org/r/20240826204353.2228736-12-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There're:
- 8 archs (arc, arm64, include, mips, powerpc, s390, sh, x86) that
support pte_pgprot().
- 2 archs (x86, sparc) that support pmd_pgprot().
- 1 arch (x86) that support pud_pgprot().
Always define them to be used in generic code, and then we don't need to
fiddle with "#ifdef"s when doing so.
Link: https://lkml.kernel.org/r/20240826204353.2228736-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide the s390 specific vdso getrandom() architecture backend.
_vdso_rng_data required data is placed within the _vdso_data vvar page,
by using a hardcoded offset larger than vdso_data.
As required the chacha20 implementation does not write to the stack.
The implementation follows more or less the arm64 implementations and
makes use of vector instructions. It has a fallback to the getrandom()
system call for machines where the vector facility is not installed.
The check if the vector facility is installed, as well as an
optimization for machines with the vector-enhancements facility 2, is
implemented with alternatives, avoiding runtime checks.
Note that __kernel_getrandom() is implemented without the vdso user
wrapper which would setup a stack frame for odd cases (aka very old
glibc variants) where the caller has not done that. All callers of
__kernel_getrandom() are required to setup a stack frame, like the C ABI
requires it.
The vdso testcases vdso_test_getrandom and vdso_test_chacha pass.
Benchmark on a z16:
$ ./vdso_test_getrandom bench-single
vdso: 25000000 times in 0.493703559 seconds
syscall: 25000000 times in 6.584025337 seconds
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The vdso.h header file, which is included at many places, includes
generated header files. This can easily lead to recursive header file
inclusions if the vdso code is changed.
Therefore move the vdso symbol code, which requires the generated
header files, to a separate header file, and include it at the two
locations which require it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Implement the infrastructure required to allow alternatives in vdso code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Provide find_section() helper function which can be used to find a
section by name, similar to other architectures.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Let test_facility() generate a branch instruction if the tested facility is
a constant, and where the result cannot be evaluated during compile
time. The branch instruction defaults to "false" and is patched to nop
(branch not taken) if the tested facility is available.
This avoids runtime checks and is similar to x86's static_cpu_has() and
arm64's alternative_has_cap_likely().
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Patch all alternatives which depend on facilities from the decompressor.
There is no technical reason which enforces to split patching of such
alternatives to the decompressor and the kernel.
This simplifies alternative handling a bit, since one alternative type is
removed.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Disable compile time optimizations of test_facility() for the
decompressor. The decompressor should not contain any optimized code
depending on the architecture level set the kernel image is compiled
for to avoid unexpected operation exceptions.
Add a __DECOMPRESSOR check to test_facility() to enforce that
facilities are always checked during runtime for the decompressor.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Displays the query (fc=0) and query authentication information (fc=127)
as binary in sysfs per CPACF instruction. Files are located in
/sys/devices/system/cpu/cpacf/. These information can be fetched via
asm already except for PCKMO because this instruction is privileged. To
offer a unified interface all CPACF instructions will have this
information displayed in sysfs in files <instruction>_query_raw and
<instruction>_query_auth_info_raw.
A new tool introduced into s390-tools called cpacfinfo will use this
information to convert and display in human readable form.
Suggested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Introduce functions __cpacf_qai() and wrapper cpacf_qai() to the
respective existing functions __cpacf_query() and cpacf_query() are
introduced to support the Query Authentication Information feature of
MSA 13.
Suggested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Rework of the __cpacf_query_rre() and __cpacf_query_rrf() functions
to support additional function codes. A function code is passed as a
new parameter to specify which subfunction of the supplied Instruction
is to be called.
Suggested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add the function code definitions for using the KDSA function to the
CPACF header file.
Suggested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Instruction format RSY_RDRU is a duplicate of RSY_RURD2. Use the latter,
as it follows the s390-specific conventions for instruction format
naming used in binutils.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Patch series "mm: Care about shadow stack guard gap when getting an
unmapped area", v2.
As covered in the commit log for c44357c2e76b ("x86/mm: care about shadow
stack guard gap during placement") our current mmap() implementation does
not take care to ensure that a new mapping isn't placed with existing
mappings inside it's own guard gaps. This is particularly important for
shadow stacks since if two shadow stacks end up getting placed adjacent to
each other then they can overflow into each other which weakens the
protection offered by the feature.
On x86 there is a custom arch_get_unmapped_area() which was updated by the
above commit to cover this case by specifying a start_gap for allocations
with VM_SHADOW_STACK. Both arm64 and RISC-V have equivalent features and
use the generic implementation of arch_get_unmapped_area() so let's make
the equivalent change there so they also don't get shadow stack pages
placed without guard pages. The arm64 and RISC-V shadow stack
implementations are currently on the list:
https://lore.kernel.org/r/20240829-arm64-gcs-v12-0-42fec94743
https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/
Given the addition of the use of vm_flags in the generic implementation we
also simplify the set of possibilities that have to be dealt with in the
core code by making arch_get_unmapped_area() take vm_flags as standard.
This is a bit invasive since the prototype change touches quite a few
architectures but since the parameter is ignored the change is
straightforward, the simplification for the generic code seems worth it.
This patch (of 3):
When we introduced arch_get_unmapped_area_vmflags() in 961148704acd ("mm:
introduce arch_get_unmapped_area_vmflags()") we did so as part of properly
supporting guard pages for shadow stacks on x86_64, which uses a custom
arch_get_unmapped_area(). Equivalent features are also present on both
arm64 and RISC-V, both of which use the generic implementation of
arch_get_unmapped_area() and will require equivalent modification there.
Rather than continue to deal with having two versions of the functions
let's bite the bullet and have all implementations of
arch_get_unmapped_area() take vm_flags as a parameter.
The new parameter is currently ignored by all implementations other than
x86. The only caller that doesn't have a vm_flags available is
mm_get_unmapped_area(), as for the x86 implementation and the wrapper used
on other architectures this is modified to supply no flags.
No functional changes.
Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-0-a46b8b6dc0ed@kernel.org
Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-1-a46b8b6dc0ed@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Keep the printk code separate from the program check code and move
boot_printk() and helper functions to own printk.c file.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Consistently use boot_printk() everywhere instead of sclp_early_printk() at
some places. For some places it was required (e.g. als.c), in order to stay
in code compiled for the same architecture level, for other places it is
not obvious why sclp_early_printk() was used instead of
decompressor_printk().
Given that the whole decompressor code is compiled for the same
architecture level, there is no requirement left to use different
printk functions.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rename decompressor_printk() to boot_printk() just to have a shorter
function name, which also makes the code more readable.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Only a couple of files of the decompressor are compiled with the
minimum architecture level. This is problematic for potential function
calls between compile units, especially if a target function is within
a compile until compiled for a higher architecture level, since that
may lead to an unexpected operation exception.
Therefore compile all files of the decompressor for the same (minimum)
architecture level.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Replace CONFIG_HAVE_MARCH_*_FEATURES with MARCH_HAS_*_FEATURES
everywhere so code gets compiled correctly depending on if the
target is the kernel or the decompressor.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Provide MARCH_HAS_*_FEATURES defines which are supposed to be used
everywhere instead of the CONFIG_HAVE_MARCH_*_FEATURES defines.
Various header files contain code which depend on the
CONFIG_HAVE_MARCH_*_FEATURES defines, allowing for compile time
optimizations. If such code is used within the decompressor wrong code may
be generated (the compiler may generate instructions which are not
available for the minimum architecture level of the decompressor).
Therefore provide a new header file with MARCH_HAS_*_FEATURES defines,
which are only available if __DECOMPRESSOR is not defined. This way code
generation for the kernel image is still optimized depending on
CONFIG_HAVE_MARCH_*_FEATURES, while code generated for the decompressor is
compiled for the minimum architecture level.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Disable compile time optimizations of test_facility() for the
decompressor. The decompressor should not contain any optimized code
depending on the architecture level set the kernel image is compiled
for to avoid unexpected operation exceptions.
Add a __DECOMPRESSOR check to test_facility() to enforce that
facilities are always checked during runtime for the decompressor.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The decompressor code is partially compiled with march=z900 so it is
possible to print an error message in case a kernel is booted on a
machine which misses facilities to execute the kernel.
Given that the decompressor code also includes header files from the
core kernel this causes problems for inline assemblies and other code
where the minimum assumed architecture level is set to z10 in the
meantime. If such code is also used in the decompressor (e.g. inline
functions) z900 support must be implemented again.
In order to avoid this and to keep things simple just raise the
minimum architecture level to z10 for the decompressor just like for
the kernel.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The bss section of the decompressor is part of the compressed kernel image
since commit 980d5f9ab36b ("s390/boot: enable .bss section for compressed
kernel").
Remove a now incorrect comment that states that the bss section must not be
accessed.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit "s390/sha3: Support sha3 performance enhancements"
the selftests of the sha3_256_s390 and sha3_512_s390 kernel digests
sometimes fail with:
alg: shash: sha3-256-s390 test failed (wrong result) on test vector 3,
cfg="import/export"
alg: self-tests for sha3-256 using sha3-256-s390 failed (rc=-22)
or with
alg: ahash: sha3-256-s390 test failed (wrong result) on test vector 3,
cfg="digest misaligned splits crossing pages"
alg: self-tests for sha3-256 using sha3-256-s390 failed (rc=-22)
The first failure is because the newly introduced context field
'first_message_part' is not copied during export and import operations.
Because of that the value of 'first_message_part' is more or less random
after an import into a newly allocated context and may or may not fit to
the state of the imported SHA3 operation, causing an invalid hash when it
does not fit.
Save the 'first_message_part' field in the currently unused field 'partial'
of struct sha3_state, even though the meaning of 'partial' is not exactly
the same as 'first_message_part'. For the caller the returned state blob
is opaque and it must only be ensured that the state can be imported later
on by the module that exported it.
The second failure is when on entry of s390_sha_update() the flag
'first_message_part' is on, and kimd is called in the first 'if (index)'
block as well as in the second 'if (len >= bsize)' block. In this case,
the 'first_message_part' is turned off after the first kimd, but the
function code incorrectly retains the NIP flag. Reset the NIP flag after
the first kimd unconditionally besides turning 'first_message_part' off.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: 88c02b3f79a6 ("s390/sha3: Support sha3 performance enhancements")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add support for deriving protected keys from clear key token for
AES xts and HMAC keys via PCKMO instruction. Add support for
protected key generation and unwrap of protected key tokens for
these key types. Furthermore 4 new sysfs attributes are introduced:
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_128
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_256
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_512
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_1024
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add the defines for the new PCKMO functions covering
MSA 10 (AES XTS "double" keys) and MSA 11 (HMAC keys)
support.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Adding/removing large amount of pages at once to/from the CMM balloon
can result in rcu_sched stalls or workqueue lockups, because of busy
looping w/o cond_resched().
Prevent this by adding a cond_resched(). cmm_free_pages() holds a
spin_lock while looping, so it cannot be added directly to the existing
loop. Instead, introduce a wrapper function that operates on maximum 256
pages at once, and add it there.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Update the internal array of PAI extension 1 NNPA
counter string table to support specialized processor
instrumentation assist instructions.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Update the internal array of PAI crypto counter string
table with new counters supported with Message Security
Assist extension (MSA) 10 and MSA 11.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Finn Callies <fcallies@linux.ibm.com>
Tested-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Every architecture that supports NUMA defines node_data in the same way:
struct pglist_data *node_data[MAX_NUMNODES];
No reason to keep multiple copies of this definition and its forward
declarations, especially when such forward declaration is the only thing
in include/asm/mmzone.h for many architectures.
Add definition and declaration of node_data to generic code and drop
architecture-specific versions.
Link: https://lkml.kernel.org/r/20240807064110.1003856-8-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
|
|
folio_walk
Let's get rid of another follow_page() user and perform the conversion
under PTL: Note that this is also what follow_page_pte() ends up doing.
Unfortunately we cannot currently optimize out the additional reference,
because arch_make_folio_accessible() must be called with a raised refcount
to protect against concurrent conversion to secure. We can just move the
arch_make_folio_accessible() under the PTL, like follow_page_pte() would.
We'll effectively drop the "writable" check implied by FOLL_WRITE:
follow_page_pte() would also not check that when calling
arch_make_folio_accessible(), so there is no good reason for doing that
here.
We'll lose the secretmem check from follow_page() as well, about which we
shouldn't really care.
Link: https://lkml.kernel.org/r/20240802155524.517137-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's get rid of another follow_page() user and perform the UV calls under
PTL -- which likely should be fine.
No need for an additional reference while holding the PTL:
uv_destroy_folio() and uv_convert_from_secure_folio() raise the refcount,
so any concurrent make_folio_secure() would see an unexpted reference and
cannot set PG_arch_1 concurrently.
Do we really need a writable PTE? Likely yes, because the "destroy" part
is, in comparison to the export, a destructive operation. So we'll keep
the writability check for now.
We'll lose the secretmem check from follow_page(). Likely we don't care
about that here.
Link: https://lkml.kernel.org/r/20240802155524.517137-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All code was converted to using arch_make_folio_accessible(), let's drop
arch_make_page_accessible().
Link: https://lkml.kernel.org/r/20240729183844.388481-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add three counters to follow and understand hiperdispatch behavior;
* adjustment_count (amount of capacity adjustments triggered)
* greedy_time_ms (time spent while all cpus are on high capacity)
* conservative_time_ms (time spent while only entitled cpus are on high
capacity)
These counters can be found under /sys/kernel/debug/s390/hiperdispatch/
Time counters are in <msec> format and only cover the time spent
when hiperdispatch is active.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add two attributes for debug purposes. They can be found under;
/sys/devices/system/cpu/hiperdispatch/
* hd_stime_threshold : allows user to adjust steal time threshold
* hd_delay_factor : allows user to adjust delay factor of hiperdispatch
work (after topology updates, delayed work is
always delayed extra by this factor)
hd_stime_threshold can have values between 0-100 as it represents a
percentage value.
hd_delay_factor can have values greater than 1. It is multiplied with
the default delay to achieve a longer interval, pushing back the next
hiperdispatch adjustment after a topology update.
Ex:
if delay interval is 250ms and the delay factor is 4;
delayed interval is now 1000ms(1sec). After each capacity adjustment
or topology change, work has a delayed interval of 1 sec for one
interval.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Expose hiperdispatch controls via sysctl. The user can now toggle
hiperdispatch via assigning 0 or 1 to s390.hiperdispatch attribute.
When hiperdipatch is toggled on, it tries to adjust CPU capacities,
while system is in vertical polarization to gain performance benefits
from different CPU polarizations. Disabling hiperdispatch reverts the
CPU capacities to their default (HIGH_CAPACITY) and stops the dynamic
adjustments.
Introduce a kconfig option HIPERDISPATCH_ON which allows users to
use hiperdispatch by default on vertical polarization. Using the
sysctl attribute s390.hiperdispatch would overwrite this behavior.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add trace events to debug hiperdispatch behavior and track domain
rebuilding. Two events provide information about the decision making of
hiperdispatch and the adjustments made.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Co-developed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The measurements done by hiperdispatch can have sudden spikes and dips
during run time. To prevent these outliers effecting the decision making
process and causing adjustment overhead, use weighted average of the
steal time.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Co-developed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When LPAR is in vertical polarization, CPUs get different polarization
values, namely vertical high, vertical medium and vertical low. These
values represent the likelyhood of the CPU getting physical runtime.
Vertical high CPUs will always get runtime and others get varying
runtime depending on the load the CEC is under.
Vertical high and vertical medium CPUs are considered the CPUs which the
current LPAR has the entitlement to run on. The vertical lows are on the
other hand are borrowed CPUs which would only be given to the LPAR by
hipervisor when the other LPARs are not utilizing them.
Using the CPU capacities, hint linux scheduler when it should prioritise
vertical high and vertical medium CPUs over vertical low CPUs.
By tracking various system statistics hiperdispatch determines when to
adjust cpu capacities.
After each adjustment, rebuilding of scheduler domains is necessary to
notify the scheduler about capacity changes but since this operation is
costly it should be done as sparsely as possible.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Co-developed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Linux scheduler allows architectures to assign capacity values to
individual CPUs. This hints scheduler the performance difference between
CPUs and allows more efficient task distribution them. Implement
helper methods to set and get CPU capacities for s390. This is
particularly helpful in vertical polarization configurations of LPARs.
On vertical polarization an LPARs CPUs can get different polarization
values depending on the CEC configuration. CPUs with different
polarization values can perform different from each other, using CPU
capacities this can be reflected to linux scheduler.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
By default, all systems on s390 start in horizontal cpu polarization.
Selecting the new config option SCHED_TOPOLOGY_VERTICAL allows to build
a kernel that switches to vertical polarization during boot.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Provide an additional path to set the polarization of the system, such
that a user no longer relies on the sysfs interface only and is able
configure the polarization for every reboot via sysctl control files.
The new sysctl can be set as follows:
- s390.polarization=0 for horizontal polarization
- s390.polarization=1 for vertical polarization
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Introduce a new debug file which allows to determine how many warning
track grace periods were missed on each CPU.
The new file can be found as /sys/kernel/debug/s390/wti
It is formatted as:
CPU0 CPU1 [...] CPUx
xyz xyz [...] xyz
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
A virtual CPU that has received a warning-track interrupt may fail to
acknowledge the interrupt within the warning-track grace period.
While this is usually not a problem, it will become necessary to
investigate if there is a large number of such missed warning-track
interrupts. Therefore, it is necessary to track these events.
The information is tracked through the s390 debug facility and can be
found under /sys/kernel/debug/s390dbf/wti/.
The hex_ascii output is formatted as:
<pid> <symbol>
The values pid and current psw are collected when a warning track
interrupt is received. Symbol is either the kernel symbol matching the
collected psw or redacted to <user> when running in user space.
Each line represents the currently executing process when a warning
track interrupt was received which was then not acknowledged within its
grace period.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|