aboutsummaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2022-10-02riscv: Introduce support for defining instructionsAndrew Jones2-0/+93
When compiling with toolchains that haven't yet been taught about new instructions we need to encode them ourselves. Create a new file where support for instruction definitions will evolve. We initiate the file with a macro called INSN_R(), which implements the R-type instruction encoding. INSN_R() will use the assembler's .insn directive when available, which should give the assembler a chance to do some validation. When .insn is not available we fall back to manual encoding. Not only should using instruction encoding macros improve readability and maintainability of code over the alternative of inserting instructions directly (e.g. '.word 0xc0de'), but we should also gain potential for more optimized code after compilation because the compiler will have control over the input and output registers used. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-10-02riscv: Add X register names to gpr-numsAndrew Jones1-0/+8
When encoding instructions it's sometimes necessary to set a register field to a precise number. This is easiest to do using the x<num> naming. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-09-30Merge tag 'kvm-x86-6.1-2' of https://github.com/sean-jc/linux into HEADPaolo Bonzini1-1/+0
KVM x86 updates for 6.1, batch #2: - Misc PMU fixes and cleanups. - Fixes for Hyper-V hypercall selftest
2022-09-27riscv: dts: microchip: update memory configuration for v2022.10Conor Dooley1-2/+13
In the v2022.10 reference design, the seg registers are going to be changed, resulting in a required change to the memory map in Linux. A small 4M reservation is made at the end of 32-bit DDR to provide some memory for the HSS to use, so that it can cache its payload.bin between reboots of a specific context. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-27riscv: dts: microchip: add a devicetree for aries' m100pfsevpConor Dooley3-0/+225
Add device trees for both configs used by the Aries Embedded M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM, featuring: - 2GB DDR4 SDRAM dedicated to the HMS - 512MB DDR4 SDRAM dedicated to the FPGA - 32 MB SPI NOR Flash - 4 GByte eMMC and a carrier board with: - 2x Gigabit Ethernet - USB - 2x UART - 2x CAN - TFT connector - HSMC extension connector - 3x PMOD extension connectors - microSD-card slot Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf Co-developed-by: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-27riscv: dts: microchip: add sevkit device treeVattipalli Praveen3-0/+191
Add a basic dts for the Microchip Smart Embedded Vision dev kit. The SEV kit is an upcoming first party board, featuring an MPFS250T and: - Dual Sony Camera Sensors (IMX334) - IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi - Bluetooth 5 Low Energy - 4 GB DDR4 x64 - 2 GB LPDDR4 x32 - 1 GB SPI Flash - 8 GB eMMC flash & SD card slot (multiplexed) - HDMI2.0 Video Input/Output - MIPI DSI Output - MIPI CSI-2 Input Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06 Signed-off-by: Vattipalli Praveen <praveen.kumar@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-27riscv: dts: microchip: reduce the fic3 clock rateConor Dooley1-1/+1
For the v2022.09 release of the reference design, the fic3 clock rate been reduced from 62.5 MHz to 50 MHz as it allows timing to be closed significantly more quickly by customers who chose to build the reference design themselves. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-27riscv: dts: microchip: icicle: re-jig fabric peripheral addressesConor Dooley1-4/+4
When users try to add onto the reference design, they find that the current addresses that peripherals connected to Fabric InterConnect (FIC) 3 use are restrictive. For the v2022.09 reference design, the peripherals have been shifted down, leaving more contiguous address space for their custom IP/peripherals. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-27riscv: dts: microchip: icicle: update pci address propertiesConor Dooley1-5/+5
For the v2022.09 reference design the PCI root port's data region has been moved to FIC1 from FIC0. This is a shorter path, allowing for higher clock rates and improved through-put. As a result, the address at which the PCIe's data region appears to the core complex has changed. The config region's address is unchanged. As FIC0 is no longer used, its clock can be removed too. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-27riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsiConor Dooley3-33/+58
In today's edition of moving things around: The PCIe root port on PolarFire SoC is more part of the FPGA than of the Core Complex. It is located on the other side of the chip and, apart from its interrupts, most of its configuration is determined by the FPGA bitstream rather. This includes: - address translation in both directions - the addresses at which the config and data regions appear to the core complex - the clocks used by the AXI bus - the plic interrupt used Moving the PCIe node to the -fabric.dtsi makes it clearer than a singular configuration for root port is not correct & allows the base SoC dtsi to be more easily included. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-27riscv: dts: microchip: add pci dma ranges for the icicle kitConor Dooley2-2/+8
The recently removed, accidentally included, "matr0" property was used in place of a dma-ranges property. The PCI controller is non-functional with mainline Linux in the v2022.02 or later reference designs and has not worked without configuration of address-translation since v2021.08. Add the address translation that will be used by the v2022.09 reference design & update the compatible used by the dts. Since this change is not backwards compatible, update the compatible to denote this, jumping over v2022.09 directly to v2022.10. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-26riscv: use vma iterator for vdsoLiam R. Howlett1-1/+2
Remove the linked list use in favour of the vma iterator. Link: https://lkml.kernel.org/r/20220906194824.2110408-67-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-26KVM: remove KVM_REQ_UNHALTPaolo Bonzini1-1/+0
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return value of kvm_vcpu_block/kvm_vcpu_halt. Remove it. No functional change intended. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-Id: <20220921003201.1441511-13-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-23Merge tag 'riscv-for-linus-6.0-rc7' of ↵Linus Torvalds7-13/+25
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A handful of build fixes for the T-Head errata, including some functional issues the compilers found - A fix for a nasty sigreturn bug * tag 'riscv-for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Avoid coupling the T-Head CMOs and Zicbom riscv: fix a nasty sigreturn bug... riscv: make t-head erratas depend on MMU riscv: fix RISCV_ISA_SVPBMT kconfig dependency warning RISC-V: Clean up the Zicbom block size probing
2022-09-22riscv: Allow PROT_WRITE-only mmap()Andrew Bresticker1-3/+0
Commit 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout PROT_READ with the justification that a write-only PTE is considered a reserved PTE permission bit pattern in the privileged spec. This check is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is inconsistent with other architectures that don't support write-only PTEs, creating a potential software portability issue. Just remove the check altogether and let PROT_WRITE imply PROT_READ as is the case on other architectures. Note that this also allows PROT_WRITE|PROT_EXEC mappings which were disallowed prior to the aforementioned commit; PROT_READ is implied in such mappings as well. Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-22riscv: Make VM_WRITE imply VM_READAndrew Bresticker1-1/+2
RISC-V does not presently have write-only mappings as that PTE bit pattern is considered reserved in the privileged spec, so allow handling of read faults in VMAs that have VM_WRITE without VM_READ in order to be consistent with other architectures that have similar limitations. Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-20riscv: efi: enable generic EFI compressed bootArd Biesheuvel3-1/+12
Wire up the generic EFI zboot support for RISC-V. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2022-09-17efi/libstub: use EFI provided memcpy/memset routinesArd Biesheuvel1-9/+0
The stub is used in different execution environments, but on arm64, RISC-V and LoongArch, we still use the core kernel's implementation of memcpy and memset, as they are just a branch instruction away, and can generally be reused even from code such as the EFI stub that runs in a completely different address space. KAsan complicates this slightly, resulting in the need for some hacks to expose the uninstrumented, __ prefixed versions as the normal ones, as the latter are instrumented to include the KAsan checks, which only work in the core kernel. Unfortunately, #define'ing memcpy to __memcpy when building C code does not guarantee that no explicit memcpy() calls will be emitted. And with the upcoming zboot support, which consists of a separate binary which therefore needs its own implementation of memcpy/memset anyway, it's better to provide one explicitly instead of linking to the existing one. Given that EFI exposes implementations of memmove() and memset() via the boot services table, let's wire those up in the appropriate way, and drop the references to the core kernel ones. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-17RISC-V: Avoid coupling the T-Head CMOs and ZicbomPalmer Dabbelt1-1/+5
We could make the T-Head CMOs depend on a new-enough assembler to have Zicbom, but it's not strictly necessary because the T-Head CMOs circumvent the assembler. Fixes: 8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915170900.22685-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-17riscv: fix a nasty sigreturn bug...Al Viro1-0/+2
riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix really nasty sigreturn bug"); if signal gets caught by an interrupt that hits when we have the right value in a0 (-513), *and* another signal gets delivered upon sigreturn() (e.g. included into the blocked mask for the first signal and posted while the handler had been running), the syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are in a syscall, after all) and a0 already restored to its original value (-513, which happens to be -ERESTARTNOINTR) and assume that we need to apply the usual syscall restart logics. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-17riscv: make t-head erratas depend on MMUHeiko Stuebner1-2/+2
Both basic extensions of SVPBMT and ZICBOM depend on CONFIG_MMU. Make the T-Head errata implementations of the similar functionality also depend on it to prevent build errors. Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head") Fixes: d20ec7529236 ("riscv: implement cache-management errata for T-Head SoCs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220907154932.2858518-1-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-17riscv: fix RISCV_ISA_SVPBMT kconfig dependency warningRandy Dunlap1-0/+1
RISCV_ISA_SVPBMT selects RISCV_ALTERNATIVE which depends on !XIP_KERNEL. Therefore RISCV_ISA_SVPBMT should also depend on !XIP_KERNEL so quieten this kconfig warning: WARNING: unmet direct dependencies detected for RISCV_ALTERNATIVE Depends on [n]: !XIP_KERNEL [=y] Selected by [y]: - RISCV_ISA_SVPBMT [=y] && 64BIT [=y] && MMU [=y] Fixes: ff689fd21cb1 ("riscv: add RISC-V Svpbmt extension support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable@vger.kernel.org Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220709014929.14221-1-rdunlap@infradead.org/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-13RISC-V: Clean up the Zicbom block size probingPalmer Dabbelt4-11/+16
This fixes two issues: I truncated the warning's hart ID when porting to the 64-bit hart ID code, and the original code's warning handling could fire on an uninitialized hart ID. The biggest change here is that riscv_cbom_block_size is no longer initialized, as IMO the default isn't sane: there's nothing in the ISA that mandates any specific cache block size, so falling back to one will just silently produce the wrong answer on some systems. This also changes the probing order so the cache block size is known before enabling Zicbom support. CC: stable@vger.kernel.org CC: Andrew Jones <ajones@ventanamicro.com> CC: Heiko Stuebner <heiko@sntech.de> CC: Atish Patra <atishp@rivosinc.com> Fixes: 3aefb2ee5bdd ("riscv: implement Zicbom-based CMO instructions + the t-head variant") Fixes: 1631ba1259d6 ("riscv: Add support for non-coherent devices using zicbom extension") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> [Conor: fixed the redefinition errors] Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220912224800.998121-1-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-11kernel: exit: cleanup release_thread()Kefeng Wang1-5/+0
Only x86 has own release_thread(), introduce a new weak release_thread() function to clean empty definitions in other ARCHs. Link: https://lkml.kernel.org/r/20220819014406.32266-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Brian Cain <bcain@quicinc.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch] Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> [csky] Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-09Merge tag 'riscv-for-linus-6.0-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A pair of device tree fixes for the Polarfire SOC - A fix to avoid overflowing the PMU counter array when firmware incorrectly reports the number of supported counters, which manifests on OpenSBI versions prior to 1.1 * tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: perf: RISC-V: fix access beyond allocated array riscv: dts: microchip: use an mpfs specific l2 compatible dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
2022-09-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-15/+13
Pull kvm fixes from Paolo Bonzini: "s390: - PCI interpretation compile fixes RISC-V: - fix unused variable warnings in vcpu_timer.c - move extern sbi_ext declarations to a header x86: - check validity of argument to KVM_SET_MP_STATE - use guest's global_ctrl to completely disable guest PEBS - fix a memory leak on memory allocation failure - mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES - fix build failure with Clang integrated assembler - fix MSR interception - always flush TLBs when enabling dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: check validity of argument to KVM_SET_MP_STATE perf/x86/core: Completely disable guest PEBS via guest's global_ctrl KVM: x86: fix memoryleak in kvm_arch_vcpu_create() KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES KVM: s390: pci: Hook to access KVM lowlevel from VFIO riscv: kvm: move extern sbi_ext declarations to a header riscv: kvm: vcpu_timer: fix unused variable warnings KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE() KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang KVM: VMX: Heed the 'msr' argument in msr_write_intercepted() kvm: x86: mmu: Always flush TLBs when enabling dirty logging kvm: x86: mmu: Drop the need_remote_flush() function
2022-09-03mm: pagewalk: Fix race between unmap and page walkerSteven Price1-2/+2
The mmap lock protects the page walker from changes to the page tables during the walk. However a read lock is insufficient to protect those areas which don't have a VMA as munmap() detaches the VMAs before downgrading to a read lock and actually tearing down PTEs/page tables. For users of walk_page_range() the solution is to simply call pte_hole() immediately without checking the actual page tables when a VMA is not present. We now never call __walk_page_range() without a valid vma. For walk_page_range_novma() the locking requirements are tightened to require the mmap write lock to be taken, and then walking the pgd directly with 'no_vma' set. This in turn means that all page walkers either have a valid vma, or it's that special 'novma' case for page table debugging. As a result, all the odd '(!walk->vma && !walk->no_vma)' tests can be removed. Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-09-01Merge tag 'kvm-s390-master-6.0-1' of ↵Paolo Bonzini8-11/+20
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD PCI interpretation compile fixes
2022-09-01Merge tag 'kvm-riscv-fixes-6.0-1' of https://github.com/kvm-riscv/linux into ↵Paolo Bonzini3-15/+13
HEAD KVM/riscv fixes for 6.0, take #1 - Fix unused variable warnings in vcpu_timer.c - Move extern sbi_ext declarations to a header
2022-08-31riscv: dts: microchip: use an mpfs specific l2 compatibleConor Dooley1-1/+1
PolarFire SoC does not have the same l2 cache controller as the fu540, featuring an extra interrupt. Appease the devicetree checker overlords by adding a PolarFire SoC specific compatible to fix the below sort of warnings: mpfs-polarberry.dtb: cache-controller@2010000: interrupts: [[1], [3], [4], [2]] is too long Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Fixes: 34fc9cc3aebe ("riscv: dts: microchip: correct L2 cache interrupts") Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-26Merge tag 'riscv-for-linus-6.0-rc3' of ↵Linus Torvalds7-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A handful of fixes for the Microchip device trees - A pair of fixes to eliminate build warnings * tag 'riscv-for-linus-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: microchip: mpfs: remove pci axi address translation property riscv: dts: microchip: mpfs: remove bogus card-detect-delay riscv: dts: microchip: mpfs: remove ti,fifo-depth property riscv: dts: microchip: mpfs: fix incorrect pcie child node name riscv: traps: add missing prototype riscv: signal: fix missing prototype warning riscv: dts: microchip: correct L2 cache interrupts
2022-08-25riscv: enable CD-ROM file systems in defconfigHeinrich Schuchardt1-0/+3
CD-ROM images are still commonly used for installer images and other data exchange. These file systems should be supported on RISC-V by default like they are on x86_64. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220812200853.311474-1-heinrich.schuchardt@canonical.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-25Merge branch 'riscv-variable_fixes_without_kvm' of ↵Palmer Dabbelt4-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git into fixes This contains a pair of fixes for build-time warnings. * 'riscv-variable_fixes_without_kvm' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git: riscv: traps: add missing prototype riscv: signal: fix missing prototype warning
2022-08-25Merge tag 'dt-fixes-for-palmer-6.0-rc3' of ↵Palmer Dabbelt3-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git into fixes Microchip RISC-V devicetree fixes for 6.0-rc3 Two sets of fixes this time around: - A fix for the interrupt ordering of the l2-cache controller. If the driver is enabled, it would spam the console /constantly/, rendering the system useless. - General cleanup for some bogus properties in the dt, part of my quest for zero dtbs_check warnings. On that note, the interrupt ordering adds a dtbs_check warning - but I considered that fixing the potentially useless system was more of a priority. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git: riscv: dts: microchip: mpfs: remove pci axi address translation property riscv: dts: microchip: mpfs: remove bogus card-detect-delay riscv: dts: microchip: mpfs: remove ti,fifo-depth property riscv: dts: microchip: mpfs: fix incorrect pcie child node name riscv: dts: microchip: correct L2 cache interrupts
2022-08-23riscv: dts: microchip: mpfs: remove pci axi address translation propertyConor Dooley1-1/+0
An AXI master address translation table property was inadvertently added to the device tree & this was not caught by dtbs_check at the time. Remove the property - it should not be in mpfs.dtsi anyway as it would be more suitable in -fabric.dtsi nor does it actually apply to the version of the reference design we are using for upstream. Link: https://www.microsemi.com/document-portal/doc_download/1245812-polarfire-fpga-and-polarfire-soc-fpga-pci-express-user-guide # Section 1.3.3 Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23riscv: dts: microchip: mpfs: remove bogus card-detect-delayConor Dooley2-2/+0
Recent versions of dt-schema warn about a previously undetected undocumented property: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: mmc@20008000: Unevaluated properties are not allowed ('card-detect-delay' was unexpected) From schema: Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml There are no GPIOs connected to MSSIO6B4 pin K3 so adding the common cd-debounce-delay-ms property makes no sense. The Cadence IP has a register that sets the card detect delay as "DP * tclk". On MPFS, this clock frequency is not configurable (it must be 200 MHz) & the FPGA comes out of reset with this register already set. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23riscv: dts: microchip: mpfs: remove ti,fifo-depth propertyConor Dooley2-4/+0
Recent versions of dt-schema warn about a previously undetected undocument property on the icicle & polarberry devicetrees: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: ethernet@20112000: ethernet-phy@8: Unevaluated properties are not allowed ('ti,fifo-depth' was unexpected) From schema: Documentation/devicetree/bindings/net/cdns,macb.yaml I know what you're thinking, the binding doesn't look to be the problem and I agree. I am not sure why a TI vendor property was ever actually added since it has no meaning... just get rid of it. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23riscv: dts: microchip: mpfs: fix incorrect pcie child node nameConor Dooley1-1/+1
Recent versions of dt-schema complain about the PCIe controller's child node name: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected) From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml Make the dts match the correct property name in the dts. Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-19Merge tag 'riscv-for-linus-6.0-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix to make the ISA extension static keys writable after init. This manifests at least as a crash when loading modules (including KVM). - A fixup for a build warning related to a poorly formed comment in our perf driver. * tag 'riscv-for-linus-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: perf: riscv legacy: fix kerneldoc comment warning riscv: Ensure isa-ext static keys are writable
2022-08-19riscv: kvm: move extern sbi_ext declarations to a headerConor Dooley2-11/+13
Sparse complains about missing statics in the declarations of several variables: arch/riscv/kvm/vcpu_sbi_replace.c:38:37: warning: symbol 'vcpu_sbi_ext_time' was not declared. Should it be static? arch/riscv/kvm/vcpu_sbi_replace.c:73:37: warning: symbol 'vcpu_sbi_ext_ipi' was not declared. Should it be static? arch/riscv/kvm/vcpu_sbi_replace.c:126:37: warning: symbol 'vcpu_sbi_ext_rfence' was not declared. Should it be static? arch/riscv/kvm/vcpu_sbi_replace.c:170:37: warning: symbol 'vcpu_sbi_ext_srst' was not declared. Should it be static? arch/riscv/kvm/vcpu_sbi_base.c:69:37: warning: symbol 'vcpu_sbi_ext_base' was not declared. Should it be static? arch/riscv/kvm/vcpu_sbi_base.c:90:37: warning: symbol 'vcpu_sbi_ext_experimental' was not declared. Should it be static? arch/riscv/kvm/vcpu_sbi_base.c:96:37: warning: symbol 'vcpu_sbi_ext_vendor' was not declared. Should it be static? arch/riscv/kvm/vcpu_sbi_hsm.c:115:37: warning: symbol 'vcpu_sbi_ext_hsm' was not declared. Should it be static? These variables are however used in vcpu_sbi.c where they are declared as extern. Move them to kvm_vcpu_sbi.h which is handily already included by the three other files. Fixes: a046c2d8578c ("RISC-V: KVM: Reorganize SBI code by moving SBI v0.1 to its own file") Fixes: 5f862df5585c ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2") Fixes: 3e1d86569c21 ("RISC-V: KVM: Add SBI HSM extension in KVM") Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-08-19riscv: kvm: vcpu_timer: fix unused variable warningsConor Dooley1-4/+0
In two places, csr is set but never used: arch/riscv/kvm/vcpu_timer.c:302:23: warning: variable 'csr' set but not used [-Wunused-but-set-variable] struct kvm_vcpu_csr *csr; ^ arch/riscv/kvm/vcpu_timer.c:327:23: warning: variable 'csr' set but not used [-Wunused-but-set-variable] struct kvm_vcpu_csr *csr; ^ Remove the variable. Fixes: 8f5cb44b1bae ("RISC-V: KVM: Support sstc extension") Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-08-19KVM: Rename mmu_notifier_* to mmu_invalidate_*Chao Peng1-2/+2
The motivation of this renaming is to make these variables and related helper functions less mmu_notifier bound and can also be used for non mmu_notifier based page invalidation. mmu_invalidate_* was chosen to better describe the purpose of 'invalidating' a page that those variables are used for. - mmu_notifier_seq/range_start/range_end are renamed to mmu_invalidate_seq/range_start/range_end. - mmu_notifier_retry{_hva} helper functions are renamed to mmu_invalidate_retry{_hva}. - mmu_notifier_count is renamed to mmu_invalidate_in_progress to avoid confusion with mn_active_invalidate_count. - While here, also update kvm_inc/dec_notifier_count() to kvm_mmu_invalidate_begin/end() to match the change for mmu_notifier_count. No functional change intended. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-18riscv: traps: add missing prototypeConor Dooley2-1/+4
Sparse complains: arch/riscv/kernel/traps.c:213:6: warning: symbol 'shadow_stack' was not declared. Should it be static? The variable is used in entry.S, so declare shadow_stack there alongside SHADOW_OVERFLOW_STACK_SIZE. Fixes: 31da94c25aea ("riscv: add VMAP_STACK overflow detection") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220814141237.493457-5-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-18riscv: signal: fix missing prototype warningConor Dooley2-0/+13
Fix the warning: arch/riscv/kernel/signal.c:316:27: warning: no previous prototype for function 'do_notify_resume' [-Wmissing-prototypes] asmlinkage __visible void do_notify_resume(struct pt_regs *regs, All other functions in the file are static & none of the existing headers stood out as an obvious location. Create signal.h to hold the declaration. Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220814141237.493457-4-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-17riscv: dts: microchip: correct L2 cache interruptsHeinrich Schuchardt1-1/+1
The "PolarFire SoC MSS Technical Reference Manual" documents the following PLIC interrupts: 1 - L2 Cache Controller Signals when a metadata correction event occurs 2 - L2 Cache Controller Signals when an uncorrectable metadata event occurs 3 - L2 Cache Controller Signals when a data correction event occurs 4 - L2 Cache Controller Signals when an uncorrectable data event occurs This differs from the SiFive FU540 which only has three L2 cache related interrupts. The sequence in the device tree is defined by an enum: enum {         DIR_CORR = 0,         DATA_CORR,         DATA_UNCORR,         DIR_UNCORR, }; So the correct sequence of the L2 cache interrupts is interrupts = <1>, <3>, <4>, <2>; [Conor] This manifests as an unusable system if the l2-cache driver is enabled, as the wrong interrupt gets cleared & the handler prints errors to the console ad infinitum. Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") CC: stable@vger.kernel.org # 5.15: e35b07a7df9b: riscv: dts: microchip: mpfs: Group tuples in interrupt properties Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-16riscv: Ensure isa-ext static keys are writableAndrew Jones1-1/+1
riscv_isa_ext_keys[] is an array of static keys used in the unified ISA extension framework. The keys added to this array may be used anywhere, including in modules. Ensure the keys remain writable by placing them in the data section. The need to change riscv_isa_ext_keys[]'s section was found when the kvm module started failing to load. Commit 8eb060e10185 ("arch/riscv: add Zihintpause support") adds a static branch check for a newly added isa-ext key to cpu_relax(), which kvm uses. Fixes: c360cbec3511 ("riscv: introduce unified static key mechanism for ISA extensions") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Cc: stable@vger.kernel.org Reported-by: Ron Economos <re@w6rz.net> Reported-by: Anup Patel <apatel@ventanamicro.com> Reported-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220816163058.3004536-1-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-15riscv: topology: fix default topology reportingConor Dooley2-2/+3
RISC-V has no sane defaults to fall back on where there is no cpu-map in the devicetree. Without sane defaults, the package, core and thread IDs are all set to -1. This causes user-visible inaccuracies for tools like hwloc/lstopo which rely on the sysfs cpu topology files to detect a system's topology. On a PolarFire SoC, which should have 4 harts with a thread each, lstopo currently reports: Machine (793MB total) Package L#0 NUMANode L#0 (P#0 793MB) Core L#0 L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0) L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1) L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2) L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3) Adding calls to store_cpu_topology() in {boot,smp} hart bringup code results in the correct topolgy being reported: Machine (793MB total) Package L#0 NUMANode L#0 (P#0 793MB) L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0) L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1) L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2) L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3) CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.") Reported-by: Brice Goglin <Brice.Goglin@inria.fr> Link: https://github.com/open-mpi/hwloc/issues/536 Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-15riscv: dts: microchip: add qspi compatible fallbackConor Dooley1-1/+1
The "hard" QSPI peripheral on PolarFire SoC is derived from version 2 of the FPGA IP core. The original binding had no fallback etc, so this device tree is valid as is. There was also no functional driver for the QSPI IP, so no device with a devicetree from a previous mainline release will regress. Link: https://lore.kernel.org/linux-spi/7c9f0d96-2882-964a-cd1f-916ddb3f0410@linaro.org/ Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-08-12Merge tag 'riscv-for-linus-5.20-mw2' of ↵Linus Torvalds42-78/+667
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "There's still a handful of new features in here, but there are a lot of fixes/cleanups as well: - Support for the Zicbom extension for explicit cache-block management, along with the necessary bits to make the non-standard cache management ops on the Allwinner D1 function - Support for the Zihintpause extension, which codifies a go-slow instruction used for cpu_relax() - Support for the Sstc extension for supervisor-mode timer/counter management - Many device tree fixes and cleanups, including a large set for the Canaan device trees - A handful of fixes and cleanups for the PMU driver" * tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits) dt-bindings: gpio: sifive: add gpio-line-names wireguard: selftests: set CONFIG_NONPORTABLE on riscv32 RISC-V: KVM: Support sstc extension RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32 RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details riscv:uprobe fix SR_SPIE set/clear handling dt-bindings: riscv: fix SiFive l2-cache's cache-sets riscv: ensure cpu_ops_sbi is declared RISC-V: cpu_ops_spinwait.c should include head.h RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h> riscv: dts: starfive: correct number of external interrupts riscv: dts: sifive unmatched: Add PWM controlled LEDs riscv/purgatory: Omit use of bin2c riscv/purgatory: hard-code obj-y in Makefile ...
2022-08-12RISC-V: KVM: Support sstc extensionAtish Patra4-7/+153
Sstc extension allows the guest to program the vstimecmp CSR directly instead of making an SBI call to the hypervisor to program the next event. The timer interrupt is also directly injected to the guest by the hardware in this case. To maintain backward compatibility, the hypervisors also update the vstimecmp in an SBI set_time call if the hardware supports it. Thus, the older kernels in guest also take advantage of the sstc extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Powered by cgit, Gruvboxed by Blaster4385.