| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded macro XIP_OFFSET entirely, stop
using XIP_OFFSET in XIP_FIXUP_OFFSET. Instead, use CONFIG_PHYS_RAM_BASE and
_sdata to do the same thing.
While at it, also add a description for XIP_FIXUP_OFFSET.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/dba0409518b14ee83b346e099b1f7f934daf7b74.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
On XIP kernel, the name "va_kernel_pa_offset" is misleading: unlike
"normal" kernel, it is not the virtual-physical address offset of kernel
mapping, it is the offset of kernel mapping's first virtual address to
first physical address in DRAM, which is not meaningful because the
kernel's first physical address is not in DRAM.
For XIP kernel, there are 2 different offsets because the read-only part of
the kernel resides in ROM while the rest is in RAM. The offset to ROM is in
kernel_map.va_kernel_xip_pa_offset, while the offset to RAM is not stored
anywhere: it is calculated on-the-fly.
Remove this confusing "va_kernel_pa_offset" and add
"va_kernel_xip_data_pa_offset" as its replacement. This new variable is the
offset of virtual mapping of the kernel's data portion to the corresponding
physical addresses.
With the introduction of this new variable, also rename
va_kernel_xip_pa_offset -> va_kernel_xip_text_pa_offset to make it clear
that this one is about the .text section.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/84e5d005c1386d88d7b2531e0b6707ec5352ee54.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The crash utility uses va_kernel_pa_offset to translate virtual addresses.
This is incorrect in the case of XIP kernel, because va_kernel_pa_offset is
not the virtual-physical address offset (yes, the name is misleading; this
variable will be removed for XIP in a following commit).
Stop exporting this variable for XIP kernel. The replacement is to be
determined, note it as a TODO for now.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/8f8760d3f9a11af4ea0acbc247e4f49ff5d317e9.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The XIP_FIXUP macro is used to fix addresses early during boot before MMU:
generated code "thinks" the data section is in ROM while it is actually in
RAM. So this macro corrects the addresses in the data section.
This macro determines if the address needs to be fixed by checking if it is
within the range starting from ROM address up to the size of (2 *
XIP_OFFSET).
This means if the kernel size is bigger than (2 * XIP_OFFSET), some
addresses would not be fixed up.
XIP kernel can still work if the above scenario does not happen. But this
macro is obviously incorrect.
Rewrite this macro to only fix up addresses within the data section.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/95f50a4ec8204ec4fcbf2a80c9addea0e0609e3b.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Merge ACPI and irqchip updates related to external interrupt controller
support on RISC-V:
- Add ACPI device enumeration support for interrupt controller probing
including taking dependencies into account (Sunil V L).
- Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L).
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L).
* acpi-riscv:
irqchip/sifive-plic: Add ACPI support
irqchip/riscv-aplic: Add ACPI support
irqchip/riscv-imsic: Add ACPI support
irqchip/riscv-imsic-state: Create separate function for DT
irqchip/riscv-intc: Add ACPI support for AIA
ACPI: RISC-V: Implement function to add implicit dependencies
ACPI: RISC-V: Initialize GSI mapping structures
ACPI: RISC-V: Implement function to reorder irqchip probe entries
ACPI: RISC-V: Implement PCI related functionality
ACPI: pci_link: Clear the dependencies after probe
ACPI: bus: Add RINTC IRQ model for RISC-V
ACPI: scan: Define weak function to populate dependencies
ACPI: scan: Add RISC-V interrupt controllers to honor list
ACPI: scan: Refactor dependency creation
ACPI: bus: Add acpi_riscv_init() function
ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe
arm64: PCI: Migrate ACPI related functions to pci-acpi.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/defconfig
RISC-V config for v6.12
Two patches, enabling clock and pinctrl support in defconfig for Sopghgo
devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: defconfig: Enable pinctrl support for CV18XX Series SoC
riscv: defconfig: sophgo: enable clks for sg2042
Link: https://lore.kernel.org/r/20240910-annex-ravage-07d63041a7c5@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc fixes for v6.11-final
StarFive:
A fix to return one of the clocks on the JH7110 from 1 GHz to 1.5 GHz
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.11-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
Link: https://lore.kernel.org/r/20240909-hybrid-groovy-601a33b5b309@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The icache will be flushed in switch_to() if force_icache_flush is true,
or in flush_icache_deferred() if icache_stale_mask is set. Between
setting force_icache_flush to false and calculating the new
icache_stale_mask, preemption needs to be disabled. There are two
reasons for this:
1. If CPU migration happens between force_icache_flush = false, and the
icache_stale_mask is set, an icache flush will not be emitted.
2. smp_processor_id() is used in set_icache_stale_mask() to mark the
current CPU as not needing another flush since a flush will have
happened either by userspace or by the kernel when performing the
migration. smp_processor_id() is currently called twice with preemption
enabled which causes a race condition. It allows
icache_stale_mask to be populated with inconsistent CPU ids.
Resolve these two issues by setting the icache_stale_mask before setting
force_icache_flush to false, and using get_cpu()/put_cpu() to obtain the
smp_processor_id().
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 6b9391b581fd ("riscv: Include riscv_set_icache_flush_ctx prctl")
Link: https://lore.kernel.org/r/20240903-fix_fencei_optimization-v2-1-8025f20171fc@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Enable pinctrl driver for the whole CV18XX series.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
PLL0 rate to 1.5GHz
CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz.
But now PLL0 rate is 1GHz and the cpu frequency loads become
250/333/500/1000MHz in fact.
The PLL0 rate should be default set to 1.5GHz and set the
cpu_core rate to 500MHz in safe.
Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC")
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
soc/dt
RISC-V Devicetrees for v6.12
Sopgho:
Added DMA controller for CV18XX.
Added I2C, MMC, GPIO and onboard MCU (HWMON) for SG2042.
Enable SDHCI0 for HuashanPi (using cv1812h).
Some minor changes about dt-bindings for Sipeed LicheeRV Nano board
(using SG2002, and SG2002 is the new codename of CV181xC).
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux:
dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatibles
dt-bindings: interrupt-controller: Add SOPHGO SG2002 plic
riscv: dts: sophgo: Add mcu device for Milk-V Pioneer
riscv: sophgo: dts: add gpio controllers for SG2042 SoC
riscv: sophgo: dts: add mmc controllers for SG2042 SoC
riscv: dts: sophgo: Add i2c device support for sg2042
riscv: dts: sophgo: Use common "interrupt-parent" for all peripherals for sg2042
riscv: dts: sophgo: Add sdhci0 configuration for Huashan Pi
riscv: dts: sophgo: cv18xx: add DMA controller
Link: https://lore.kernel.org/r/MA0P287MB28228F4FC59B057DF57D9A11FE9C2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rename the per-CPU hooks used to enable virtualization in hardware to
align with the KVM-wide helpers in kvm_main.c, and to better capture that
the callbacks are invoked on every online CPU.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240830043600.127750-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Every architecture that supports NUMA defines node_data in the same way:
struct pglist_data *node_data[MAX_NUMNODES];
No reason to keep multiple copies of this definition and its forward
declarations, especially when such forward declaration is the only thing
in include/asm/mmzone.h for many architectures.
Add definition and declaration of node_data to generic code and drop
architecture-specific versions.
Link: https://lkml.kernel.org/r/20240807064110.1003856-8-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
RISCV_ALTERNATIVE_EARLY will issue sbi_ecall() very early in the boot
process, before the first memory mapping is setup so we can't have any
instrumentation happening here.
In addition, when the kernel is relocatable, we must also not issue any
relocation this early since they would have been patched virtually only.
So, instead of disabling instrumentation for the whole kernel/sbi.c file
and compiling it with -fno-pie, simply move __sbi_ecall() and
__sbi_base_ecall() into their own file where this is fixed.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-riscv/20240813-pony-truck-3e7a83e9759e@spud/
Reported-by: syzbot+cfbcb82adf6d7279fd35@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-riscv/00000000000065062c061fcec37b@google.com/
Fixes: 1745cfafebdf ("riscv: don't use global static vars to store alternative data")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240829165048.49756-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It makes no sense to restrict physical memory size because of linear
mapping size constraints when there is no linear mapping, so only do
that when mmu is enabled.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-riscv/CAMuHMdW0bnJt5GMRtOZGkTiM7GK4UaLJCDMF_Ouq++fnDKi3_A@mail.gmail.com/
Fixes: 3b6564427aea ("riscv: Fix linear mapping checks for non-contiguous memory regions")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240827065230.145021-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
A recent change to gcc flags rv64iv as no longer valid:
cc1: sorry, unimplemented: Currently the 'V' implementation
requires the 'M' extension
and as a result vector support is disabled. Fix this by adding m
to our toolchain vector detection code.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Fixes: fa8e7cce55da ("riscv: Enable Vector code to be built")
Link: https://lore.kernel.org/r/20240819001131.1738806-1-antonb@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a missing license to vmalloc.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240729-riscv_fence_license-v1-2-7d5648069640@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a missing license to fence.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240729-riscv_fence_license-v1-1-7d5648069640@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
T-HEAD Devicetrees for v6.12
Add SPI controller node to th1520.dtsi and enable spi0 on the BeagleV
Ahead and LicheePi 4A.
The TH1520 AP_SYS clock driver landed in v6.11 so convert multiple
peripherals like mmc and uart from fixed clocks to the clock controller.
All of these patches have been successfully tested in the latest
linux-next releases.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.12' of https://github.com/pdp7/linux:
riscv: dts: thead: change TH1520 SPI node to use clock controller
riscv: dts: thead: add clock to TH1520 gpio nodes
riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller
riscv: dts: thead: change TH1520 mmc nodes to use clock controller
riscv: dts: thead: change TH1520 uart nodes to use clock controller
riscv: dts: thead: Add TH1520 AP_SUBSYS clock controller
riscv: dts: thead: add basic spi node
Link: https://lore.kernel.org/r/ZsWs8QiVruMXjzPc@x1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Image.* targets existed for other compressors already. Bootloader
support is needed for decompression.
This is for CONFIG_EFI_ZBOOT=n. With CONFIG_EFI_ZBOOT=y, XZ was already
available.
Comparision with Linux 6.10 RV64GC tinyconfig (in KiB):
1027 Image
594 Image.gz
541 Image.zst
510 Image.lzma
474 Image.xz
Link: https://lkml.kernel.org/r/20240721133633.47721-17-lasse.collin@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rui Li <me@lirui.org>
Cc: Sam James <sam@gentoo.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add mcu device and thermal zones node for Milk-V Pioneer.
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB4953C675C28B35723E87A36BBB822@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add support for the GPIO controller of Sophgo SG2042.
SG2042 uses IP from Synopsys DesignWare APB GPIO and has
three GPIO controllers.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/20240819080851.1954691-1-unicornxw@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
|
|
SG2042 has two MMC controller, one for emmc, another for sd-card.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/03ac9ec9c23bbe4c3b30271e76537bdbe5638665.1722847198.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
|
|
The i2c ip of sg2042 is a standard Synopsys i2c ip, which is already
supported by the mainline kernel.
Add i2c device node for sg2042.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB49530E59974AF0FCA4FAB6DBBBB72@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
As all peripherals of sg2042 share the same "interrupt-parent",
there is no need to use peripherals specific "interrupt-parent".
Define "interrupt-parent" in the SoC level.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB49531F6DFD2F116207C1397DBBB72@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add configuration for sdhci0 for Huashan Pi to support sd card.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB49538AC83C5DB314D10F7186BBA92@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add DMA controller dt node for CV18XX/SG200x.
Link: https://lore.kernel.org/r/IA1PR20MB4953BD73E12B8A1CDBD9E1A3BB042@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
raw_copy_{to,from}_user() do not call access_ok(), so this code allowed
userspace to access any virtual memory address.
Cc: stable@vger.kernel.org
Fixes: 7c83232161f6 ("riscv: add support for misaligned trap handling in S-mode")
Fixes: 441381506ba7 ("riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240815005714.1163136-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The hint address should not forcefully restrict the addresses returned
by mmap as this causes mmap to report ENOMEM when there is memory still
available.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: b5b4287accd7 ("riscv: mm: Use hint address in mmap if available")
Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Closes: https://lore.kernel.org/linux-kernel/ZbxTNjQPFKBatMq+@ghost/T/#mccb1890466bf5a488c9ce7441e57e42271895765
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-3-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The RINTC subtype structure in MADT also has information about other
interrupt controllers. Save this information and provide interfaces to
retrieve them when required by corresponding drivers.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-14-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
RISC-V has PLIC and APLIC in MADT as well as namespace devices.
Initialize the list of those structures using MADT and namespace devices
to create mapping between the ACPI handle and the GSI ranges. This will
be used later to add dependencies.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-12-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace the dummy implementation for PCI related functions with actual
implementation. This needs ECAM and MCFG CONFIG options to be enabled
for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-10-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Enable clk generators for sg2042 due to many peripherals rely on
these clocks.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The csr_fun defines a count parameter which defines the total number
CSRs emulated in KVM starting from the base. This value should be
equal to total number of counters possible for trap/emulation (32).
Fixes: a9ac6c37521f ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-2-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, KVM traps & emulates PMU counter access only if SBI PMU
is available as the guest can only configure/read PMU counters via
SBI only. However, if SBI PMU is not enabled in the host, the
guest will fallback to the legacy PMU which will try to access
cycle/instret and result in an illegal instruction trap which
is not desired.
KVM can allow dummy emulation of cycle/instret only for the guest
if SBI PMU is not enabled in the host. The dummy emulation will
still return zero as we don't to expose the host counter values
from a guest using legacy PMU.
Fixes: a9ac6c37521f ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-1-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
With the latest Linux-6.11-rc3, the below NULL pointer crash is observed
when SBI PMU snapshot is enabled for the guest and the guest is forcefully
powered-off.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508
Oops [#1]
Modules linked in: kvm
CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3
Hardware name: riscv-virtio,qemu (DT)
epc : __kvm_write_guest_page+0x94/0xa6 [kvm]
ra : __kvm_write_guest_page+0x54/0xa6 [kvm]
epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0
gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000
t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0
s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086
a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0
a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc
s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000
s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000
s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001
s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3
t5 : ffffffff814126e0 t6 : ffffffff81412700
status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d
[<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm]
[<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm]
[<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm]
[<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm]
[<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm]
[<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm]
[<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm]
[<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm]
[<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm]
[<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm]
[<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm]
Clearly, the kvm_vcpu_write_guest() function is crashing because it is
being called from kvm_pmu_clear_snapshot_area() upon guest tear down.
To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to
not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because
the guest is anyway being tore down.
The kvm_pmu_clear_snapshot_area() is also called when guest changes
PMU snapshot area of a VCPU but even in this case the previous PMU
snaphsot area must not be zeroed-out because the guest might have
reclaimed the pervious PMU snapshot area for some other purpose.
Fixes: c2f41ddbcdd7 ("RISC-V: KVM: Implement SBI PMU Snapshot feature")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240815170907.2792229-1-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When forwarding SBI calls to userspace ensure sbiret.error is
initialized to SBI_ERR_NOT_SUPPORTED first, in case userspace
neglects to set it to anything. If userspace neglects it then we
can't be sure it did anything else either, so we just report it
didn't do or try anything. Just init sbiret.value to zero, which is
the preferred value to return when nothing special is specified.
KVM was already initializing both sbiret.error and sbiret.value, but
the values used appear to come from a copy+paste of the __sbi_ecall()
implementation, i.e. a0 and a1, which don't apply prior to the call
being executed, nor at all when forwarding to userspace.
Fixes: dea8ee31a039 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807154943.150540-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Evan Green <evan@rivosinc.com> says:
The CPUPERF0 hwprobe key was documented and identified in code as
a bitmask value, but its contents were an enum. This produced
incorrect behavior in conjunction with the WHICH_CPUS hwprobe flag.
The first patch in this series fixes the bitmask/enum problem by
creating a new hwprobe key that returns the same data, but is
properly described as a value instead of a bitmask. The second patch
renames the value definitions in preparation for adding vector misaligned
access info. As of this version, the old defines are kept in place to
maintain source compatibility with older userspace programs.
* b4-shazam-merge:
RISC-V: hwprobe: Add SCALAR to misaligned perf defines
RISC-V: hwprobe: Add MISALIGNED_PERF key
Link: https://lore.kernel.org/r/20240809214444.3257596-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The out-of-bounds access is reported by UBSAN:
[ 0.000000] UBSAN: array-index-out-of-bounds in ../arch/riscv/kernel/vendor_extensions.c:41:66
[ 0.000000] index -1 is out of range for type 'riscv_isavendorinfo [32]'
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.11.0-rc2ubuntu-defconfig #2
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff94e078ba>] dump_backtrace+0x32/0x40
[ 0.000000] [<ffffffff95c83c1a>] show_stack+0x38/0x44
[ 0.000000] [<ffffffff95c94614>] dump_stack_lvl+0x70/0x9c
[ 0.000000] [<ffffffff95c94658>] dump_stack+0x18/0x20
[ 0.000000] [<ffffffff95c8bbb2>] ubsan_epilogue+0x10/0x46
[ 0.000000] [<ffffffff95485a82>] __ubsan_handle_out_of_bounds+0x94/0x9c
[ 0.000000] [<ffffffff94e09442>] __riscv_isa_vendor_extension_available+0x90/0x92
[ 0.000000] [<ffffffff94e043b6>] riscv_cpufeature_patch_func+0xc4/0x148
[ 0.000000] [<ffffffff94e035f8>] _apply_alternatives+0x42/0x50
[ 0.000000] [<ffffffff95e04196>] apply_boot_alternatives+0x3c/0x100
[ 0.000000] [<ffffffff95e05b52>] setup_arch+0x85a/0x8bc
[ 0.000000] [<ffffffff95e00ca0>] start_kernel+0xa4/0xfb6
The dereferencing using cpu should actually not happen, so remove it.
Fixes: 23c996fc2bc1 ("riscv: Extend cpufeature.c to detect vendor extensions")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240814192619.276794-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently x86, ARM and ARM64 support generic CPU vulnerabilites, but
RISC-V not, such as:
# cd /sys/devices/system/cpu/vulnerabilities/
x86:
# cat spec_store_bypass
Mitigation: Speculative Store Bypass disabled via prctl and seccomp
# cat meltdown
Not affected
ARM64:
# cat spec_store_bypass
Mitigation: Speculative Store Bypass disabled via prctl and seccomp
# cat meltdown
Mitigation: PTI
RISC-V:
# cat /sys/devices/system/cpu/vulnerabilities
# ... No such file or directory
As SiFive RISC-V Core IP offerings are not affected by Meltdown and
Spectre, it can use the default weak function as below:
# cat spec_store_bypass
Not affected
# cat meltdown
Not affected
Link: https://www.sifive.cn/blog/sifive-statement-on-meltdown-and-spectre
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240703022732.2068316-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Runs on the kernel with CONFIG_RISCV_ALTERNATIVE enabled:
kexec -sl vmlinux
Error:
kexec_image: Unknown rela relocation: 34
kexec_image: Error loading purgatory ret=-8
and
kexec_image: Unknown rela relocation: 38
kexec_image: Error loading purgatory ret=-8
The purgatory code uses the 16-bit addition and subtraction relocation
type, but not handled, resulting in kexec_file_load failure.
So add handle to arch_kexec_apply_relocations_add().
Tested on RISC-V64 Qemu-virt, issue fixed.
Co-developed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Ying Sun <sunying@isrc.iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240711083236.2859632-1-sunying@isrc.iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In preparation for misaligned vector performance hwprobe keys, rename
the hwprobe key values associated with misaligned scalar accesses to
include the term SCALAR. Leave the old defines in place to maintain
source compatibility.
This change is intended to be a functional no-op.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISCV_HWPROBE_KEY_CPUPERF_0 was mistakenly flagged as a bitmask in
hwprobe_key_is_bitmask(), when in reality it was an enum value. This
causes problems when used in conjunction with RISCV_HWPROBE_WHICH_CPUS,
since SLOW, FAST, and EMULATED have values whose bits overlap with
each other. If the caller asked for the set of CPUs that was SLOW or
EMULATED, the returned set would also include CPUs that were FAST.
Introduce a new hwprobe key, RISCV_HWPROBE_KEY_MISALIGNED_PERF, which
returns the same values in response to a direct query (with no flags),
but is properly handled as an enumerated value. As a result, SLOW,
FAST, and EMULATED are all correctly treated as distinct values under
the new key when queried with the WHICH_CPUS flag.
Leave the old key in place to avoid disturbing applications which may
have already come to rely on the key, with or without its broken
behavior with respect to the WHICH_CPUS flag.
Fixes: e178bf146e4b ("RISC-V: hwprobe: Introduce which-cpus flag")
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-2-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: eabd9db64ea8 ("ACPI: RISCV: Add NUMA support based on SRAT and SLIT")
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/0d362a8ae50558b95685da4c821b2ae9e8cf78be.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With XIP kernel, kernel_map.size is set to be only the size of data part of
the kernel. This is inconsistent with "normal" kernel, who sets it to be
the size of the entire kernel.
More importantly, XIP kernel fails to boot if CONFIG_DEBUG_VIRTUAL is
enabled, because there are checks on virtual addresses with the assumption
that kernel_map.size is the size of the entire kernel (these checks are in
arch/riscv/mm/physaddr.c).
Change XIP's kernel_map.size to be the size of the entire kernel.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240508191917.2892064-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Otherwise when the tracer changes syscall number to -1, the kernel fails
to initialize a0 with -ENOSYS and subsequently fails to return the error
code of the failed syscall to userspace. For example, it will break
strace syscall tampering.
Fixes: 52449c17bdd1 ("riscv: entry: set a0 = -ENOSYS only when syscall != -1")
Reported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com>
Link: https://lore.kernel.org/r/20240627142338.5114-2-CoelacanthusHex@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Change the clock property in the TH1520 SPI controller node to a clock
provided by AP_SYS clock controller.
Remove spi_clk fixed clock reference from BeagleV Ahead and LPI4a dts.
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|