| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
uprobes expects is_trap_insn() to return true for any trap instructions,
not just the one used for installing uprobe. The current default
implementation only returns true for 16-bit c.ebreak if C extension is
enabled. This can confuse uprobes if a 32-bit ebreak generates a trap
exception from userspace: uprobes asks is_trap_insn() who says there is no
trap, so uprobes assume a probe was there before but has been removed, and
return to the trap instruction. This causes an infinite loop of entering
and exiting trap handler.
Instead of using the default implementation, implement this function
speficially for riscv with checks for both ebreak and c.ebreak.
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Nam Cao <[email protected]>
Tested-by: Björn Töpel <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
If misaligned_access_speed percpu var isn't so called "HWPROBE
MISALIGNED UNKNOWN", it means the probe has happened(this is possible
for example, hotplug off then hotplug on one cpu), and the percpu var
has been set, don't probe again in this case.
Signed-off-by: Jisheng Zhang <[email protected]>
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
In the current riscv implementation, blocking syscalls like read() may
not correctly restart after being interrupted by ptrace. This problem
arises when the syscall restart process in arch_do_signal_or_restart()
is bypassed due to changes to the regs->cause register, such as an
ebreak instruction.
Steps to reproduce:
1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT.
2. Backup original registers and instruction at new_pc.
3. Change pc to new_pc, and inject an instruction (like ebreak) to this
address.
4. Resume with PTRACE_CONT and wait for the process to stop again after
executing ebreak.
5. Restore original registers and instructions, and detach from the
tracee process.
6. Now the read() syscall in tracee will return -1 with errno set to
ERESTARTSYS.
Specifically, during an interrupt, the regs->cause changes from
EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is
inaccessible via ptrace so we cannot restore it. This alteration breaks
the syscall restart condition and ends the read() syscall with an
ERESTARTSYS error. According to include/linux/errno.h, it should never
be seen by user programs. X86 can avoid this issue as it checks the
syscall condition using a register (orig_ax) exposed to user space.
Arm64 handles syscall restart before calling get_signal, where it could
be paused and inspected by ptrace/debugger.
This patch adjusts the riscv implementation to arm64 style, which also
checks syscall using a kernel register (syscallno). It ensures the
syscall restart process is not bypassed when changes to the cause
register occur, providing more consistent behavior across various
architectures.
For a simplified reproduction program, feel free to visit:
https://github.com/ancientmodern/riscv-ptrace-bug-demo.
Signed-off-by: Haorong Lu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Clément Léger <[email protected]> says:
Since commit 61cadb9 ("Provide new description of misaligned load/store
behavior compatible with privileged architecture.") in the RISC-V ISA
manual, it is stated that misaligned load/store might not be supported.
However, the RISC-V kernel uABI describes that misaligned accesses are
supported. In order to support that, this series adds support for S-mode
handling of misaligned accesses as well support for prctl(PR_UNALIGN).
Handling misaligned access in kernel allows for a finer grain control
of the misaligned accesses behavior, and thanks to the prctl() call,
can allow disabling misaligned access emulation to generate SIGBUS. User
space can then optimize its software by removing such access based on
SIGBUS generation.
This series is useful when using a SBI implementation that does not
handle misaligned traps as well as detecting misaligned accesses
generated by userspace application using the prctrl(PR_SET_UNALIGN)
feature.
This series can be tested using the spike simulator[1] and a modified
openSBI version[2] which allows to always delegate misaligned load/store to
S-mode. A test[3] that exercise various instructions/registers can be
executed to verify the unaligned access support.
[1] https://github.com/riscv-software-src/riscv-isa-sim
[2] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned
[3] https://github.com/clementleger/unaligned_test
* b4-shazam-merge:
riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN
riscv: report misaligned accesses emulation to hwprobe
riscv: annotate check_unaligned_access_boot_cpu() with __init
riscv: add support for sysctl unaligned_enabled control
riscv: add floating point insn support to misaligned access emulation
riscv: report perf event for misaligned fault
riscv: add support for misaligned trap handling in S-mode
riscv: remove unused functions in traps_misaligned.c
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
|
A hwprobe pair key is signed, but the hwprobe vDSO function was
only checking that the upper bound was valid. In order to help
avoid this type of problem in the future, and in anticipation of
this check becoming more complicated with sparse keys, introduce
and use a "key is valid" predicate function for the check.
Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Sami Tolvanen <[email protected]> says:
This series adds Shadow Call Stack (SCS) support for RISC-V. SCS
uses compiler instrumentation to store return addresses in a
separate shadow stack to protect them against accidental or
malicious overwrites. More information about SCS can be found
here:
https://clang.llvm.org/docs/ShadowCallStack.html
Patch 1 is from Deepak, and it simplifies VMAP_STACK overflow
handling by adding support for accessing per-CPU variables
directly in assembly. The patch is included in this series to
make IRQ stack switching cleaner with SCS, and I've simply
rebased it and fixed a couple of minor issues. Patch 2 uses this
functionality to clean up the stack switching by moving duplicate
code into a single function. On RISC-V, the compiler uses the
gp register for storing the current shadow call stack pointer,
which is incompatible with global pointer relaxation. Patch 3
moves global pointer loading into a macro that can be easily
disabled with SCS. Patch 4 implements SCS register loading and
switching, and allows the feature to be enabled, and patch 5 adds
separate per-CPU IRQ shadow call stacks when CONFIG_IRQ_STACKS is
enabled. Patch 6 fixes the backward-edge CFI test in lkdtm for
RISC-V.
Note that this series requires Clang 17. Earlier Clang versions
support SCS on RISC-V, but use the x18 register instead of gp,
which isn't ideal. gcc has SCS support for arm64, but I'm not
aware of plans to support RISC-V. Once the Zicfiss extension is
ratified, it's probably preferable to use hardware-backed shadow
stacks instead of SCS on hardware that supports the extension,
and we may want to consider implementing CONFIG_DYNAMIC_SCS to
patch between the implementation at runtime (similarly to the
arm64 implementation, which switches to SCS when hardware PAC
support isn't available).
* b4-shazam-merge:
lkdtm: Fix CFI_BACKWARD on RISC-V
riscv: Use separate IRQ shadow call stacks
riscv: Implement Shadow Call Stack
riscv: Move global pointer loading to a macro
riscv: Deduplicate IRQ stack switching
riscv: VMAP_STACK overflow detection thread-safe
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
|
Now that trap support is ready to handle misalignment errors in S-mode,
allow the user to control the behavior of misaligned accesses using
prctl(PR_SET_UNALIGN). Add an align_ctl flag in thread_struct which
will be used to determine if we should SIGBUS the process or not on
such fault.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
hwprobe provides a way to report if misaligned access are emulated. In
order to correctly populate that feature, we can check if it actually
traps when doing a misaligned access. This can be checked using an
exception table entry which will actually be used when a misaligned
access is done from kernel mode.
Signed-off-by: Clément Léger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
This function is solely called as an initcall, thus annotate it with
__init.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
This sysctl tuning option allows the user to disable misaligned access
handling globally on the system. This will also be used by misaligned
detection code to temporarily disable misaligned access handling.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
This support is partially based of openSBI misaligned emulation floating
point instruction support. It provides support for the existing
floating point instructions (both for 32/64 bits as well as compressed
ones). Since floating point registers are not part of the pt_regs
struct, we need to modify them directly using some assembly. We also
dirty the pt_regs status in case we modify them to be sure context
switch will save FP state. With this support, Linux is on par with
openSBI support.
Signed-off-by: Clément Léger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Add missing calls to account for misaligned fault event using
perf_sw_event().
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Misalignment trap handling is only supported for M-mode and uses direct
accesses to user memory. In S-mode, when handling usermode fault, this
requires to use the get_user()/put_user() accessors. Implement
load_u8(), store_u8() and get_insn() using these accessors for
userspace and direct text access for kernel.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Replace macros by the only two function calls that are done from this
file, store_u8() and load_u8().
Signed-off-by: Clément Léger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Sunil V L <[email protected]> says:
This series is a set of patches which were originally part of RFC v1 series
[1] to add ACPI support in RISC-V interrupt controllers. Since these
patches are independent of the interrupt controllers, creating this new
series which helps to merge instead of waiting for big series.
This set of patches primarily adds support below ECR [2] which is approved
by the ASWG and adds below features.
- Get CBO block sizes from RHCT on ACPI based systems.
Additionally, the series contains a patch to improve acpi_os_ioremap().
[1] - https://lore.kernel.org/lkml/[email protected]/
[2] - https://drive.google.com/file/d/1sKbOa8m1UZw1JkquZYe3F1zQBN1xXsaf/view?usp=sharing
* b4-shazam-merge:
RISC-V: cacheflush: Initialize CBO variables on ACPI systems
RISC-V: ACPI: RHCT: Add function to get CBO block sizes
RISC-V: ACPI: Update the return value of acpi_get_rhct()
RISC-V: ACPI: Enhance acpi_os_ioremap with MMIO remapping
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The interrupt entries are expected to be in the .irqentry.text section.
For example, for kprobes to work properly, exception code cannot be
probed; this is ensured by blacklisting addresses in the .irqentry.text
section.
Fixes: 7db91e57a0ac ("RISC-V: Task implementation")
Signed-off-by: Nam Cao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Extensions prefixed with "Su" won't corrupt the workaround in many
cases. The only exception is when the first multi-letter extension in the
ISA string begins with "Su" and is not prefixed with an underscore.
For instance, following ISA string can confuse this QEMU workaround.
* "rv64imacsuclic" (RV64I + M + A + C + "Suclic")
However, this case is very unlikely because extensions prefixed by either
"Z", "Sm" or "Ss" will most likely precede first.
For instance, the "Suclic" extension (draft as of now) will be placed after
related "Smclic" and "Ssclic" extensions. It's also highly likely that
other unprivileged extensions like "Zba" will precede.
It's also possible to suppress the issue in the QEMU workaround with an
underscore. Following ISA string won't confuse the QEMU workaround.
* "rv64imac_suclic" (RV64I + M + A + C + delimited "Suclic")
This fix is to tell kernel developers the nature of this workaround
precisely. There are some "Su*" extensions to be ratified but don't worry
about this workaround too much.
This commit comes with other minor editorial fixes (for minor wording and
spacing issues, without changing the meaning).
Signed-off-by: Tsukasa OI <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/8a127608cf6194a6d288289f2520bd1744b81437.1690350252.git.research_trasio@irq.a4lg.com
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Andrew Jones <[email protected]> says:
In order for usermode to issue cbo.zero, it needs privilege granted to
issue the extension instruction (patch 2) and to know that the extension
is available and its block size (patch 3). Patch 1 could be separate from
this series (it just fixes up some error messages), patches 4-5 convert
the hwprobe selftest to a statically-linked, TAP test and patch 6 adds a
new hwprobe test for the new information as well as testing CBO
instructions can or cannot be issued as appropriate.
* b4-shazam-merge:
RISC-V: selftests: Add CBO tests
RISC-V: selftests: Convert hwprobe test to kselftest API
RISC-V: selftests: Statically link hwprobe test
RISC-V: hwprobe: Expose Zicboz extension and its block size
RISC-V: Enable cbo.zero in usermode
RISC-V: Make zicbom/zicboz errors consistent
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Song Shuai <[email protected]> says:
This series contains a cleanup for riscv_kexec_relocate() and two fixups
for KEXEC_FILE and had passed the basic kexec test in my 64bit Qemu-virt.
You can use this kexec-tools[3] to test the kexec-file-syscall and these patches.
riscv: kexec: Cleanup riscv_kexec_relocate (patch1)
==================================================
For readability and simplicity, cleanup the riscv_kexec_relocate code:
- Re-sort the first 4 `mv` instructions against `riscv_kexec_method()`
- Eliminate registers for debugging (s9,s10,s11) and storing const-value (s5,s6)
- Replace `jalr` with `jr` for no-link jump
riscv: kexec: Align the kexeced kernel entry (patch2)
==================================================
The current riscv boot protocol requires 2MB alignment for RV64
and 4MB alignment for RV32.
In KEXEC_FILE path, the elf_find_pbase() function should align
the kexeced kernel entry according to the requirement, otherwise
the kexeced kernel would silently BUG at the setup_vm().
riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS (patch3)
==================================================
With CONFIG_RELOCATABLE enabled, KBUILD_CFLAGS had a -fPIE option
and then the purgatory/string.o was built to reference _ctype symbol
via R_RISCV_GOT_HI20 relocations which can't be handled by purgatory.
As a consequence, the kernel failed kexec_load_file() with:
[ 880.386562] kexec_image: The entry point of kernel at 0x80200000
[ 880.388650] kexec_image: Unknown rela relocation: 20
[ 880.389173] kexec_image: Error loading purgatory ret=-8
So remove the -fPIE option for PURGATORY_CFLAGS to generate
R_RISCV_PCREL_HI20 relocations type making puragtory work as it was.
arch/riscv/kernel/elf_kexec.c | 8 ++++-
arch/riscv/kernel/kexec_relocate.S | 52 +++++++++++++-----------------
arch/riscv/purgatory/Makefile | 4 +++
3 files changed, 34 insertions(+), 30 deletions(-)
* b4-shazam-merge:
riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS
riscv: kexec: Align the kexeced kernel entry
riscv: kexec: Cleanup riscv_kexec_relocate
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
KVM/riscv changes for 6.7
- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests
|
|
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Sven Schnelle <[email protected]> # s390
Reviewed-by: Nicolas Schier <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Acked-by: Helge Deller <[email protected]> # parisc
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]>
|
|
When both CONFIG_IRQ_STACKS and SCS are enabled, also use a separate
per-CPU shadow call stack.
Signed-off-by: Sami Tolvanen <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Implement CONFIG_SHADOW_CALL_STACK for RISC-V. When enabled, the
compiler injects instructions to all non-leaf C functions to
store the return address to the shadow stack and unconditionally
load it again before returning, which makes it harder to corrupt
the return address through a stack overflow, for example.
The active shadow call stack pointer is stored in the gp
register, which makes SCS incompatible with gp relaxation. Use
--no-relax-gp to ensure gp relaxation is disabled and disable
global pointer loading. Add SCS pointers to struct thread_info,
implement SCS initialization, and task switching
Signed-off-by: Sami Tolvanen <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
In Clang 17, -fsanitize=shadow-call-stack uses the newly declared
platform register gp for storing shadow call stack pointers. As
this is obviously incompatible with gp relaxation, in preparation
for CONFIG_SHADOW_CALL_STACK support, move global pointer loading
to a single macro, which we can cleanly disable when SCS is used
instead.
Link: https://reviews.llvm.org/rGaa1d2693c256
Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a484e843e6eeb51f0cb7b8819e50da6d2444d769
Signed-off-by: Sami Tolvanen <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
With CONFIG_IRQ_STACKS, we switch to a separate per-CPU IRQ stack
before calling handle_riscv_irq or __do_softirq. We currently
have duplicate inline assembly snippets for stack switching in
both code paths. Now that we can access per-CPU variables in
assembly, implement call_on_irq_stack in assembly, and use that
instead of redundant inline assembly.
Signed-off-by: Sami Tolvanen <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added
support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to
`shadow_stack` temporarily before switching finally to per-cpu
`overflow_stack`.
If two CPUs/harts are racing and end up in over flowing kernel stack, one
or both will end up corrupting each other state because `shadow_stack` is
not per-cpu. This patch optimizes per-cpu overflow stack switch by
directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`.
Following are the changes in this patch
- Defines an asm macro to obtain per-cpu symbols in destination
register.
- In entry.S, when overflow is detected, per-cpu overflow stack is
located using per-cpu asm macro. Computing per-cpu symbol requires
a temporary register. x31 is saved away into CSR_SCRATCH
(CSR_SCRATCH is anyways zero since we're in kernel).
Please see Links for additional relevant disccussion and alternative
solution.
Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT`
Kernel crash log below
Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT
Task stack: [0xff20000010a98000..0xff20000010a9c000]
Overflow stack: [0xff600001f7d98370..0xff600001f7d99370]
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
epc : __memset+0x60/0xfc
ra : recursive_loop+0x48/0xc6 [lkdtm]
epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80
gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88
t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0
s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000
a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000
a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff
s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90
s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684
s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10
s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4
t5 : ffffffff815dbab8 t6 : ff20000010a9bb48
status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f
Kernel panic - not syncing: Kernel stack overflow
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006754>] dump_backtrace+0x30/0x38
[<ffffffff808de798>] show_stack+0x40/0x4c
[<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c
[<ffffffff808ea2d8>] dump_stack+0x18/0x20
[<ffffffff808dec06>] panic+0x126/0x2fe
[<ffffffff800065ea>] walk_stackframe+0x0/0xf0
[<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm]
SMP: stopping secondary CPUs
---[ end Kernel panic - not syncing: Kernel stack overflow ]---
Cc: Guo Ren <[email protected]>
Cc: Jisheng Zhang <[email protected]>
Link: https://lore.kernel.org/linux-riscv/Y347B0x4VUNOd6V7@xhacker/T/#t
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Deepak Gupta <[email protected]>
Co-developed-by: Sami Tolvanen <[email protected]>
Signed-off-by: Sami Tolvanen <[email protected]>
Acked-by: Guo Ren <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Enhance the acpi_os_ioremap() to support opregions in MMIO space. Also,
have strict checks using EFI memory map to allow remapping the RAM similar
to arm64.
Signed-off-by: Sunil V L <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
After the vga console no longer relies on global screen_info, there are
only two remaining use cases:
- on the x86 architecture, it is used for multiple boot methods
(bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer
settings to a number of device drivers.
- on other architectures, it is only used as part of the EFI stub,
and only for the three sysfb framebuffers (simpledrm, simplefb, efifb).
Remove the duplicate data structure definitions by moving it into the
efi-init.c file that sets it up initially for the EFI case, leaving x86
as an exception that retains its own definition for non-EFI boots.
The added #ifdefs here are optional, I added them to further limit the
reach of screen_info to configurations that have at least one of the
users enabled.
Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Helge Deller <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
On non-x86 architectures, the screen_info variable is generally only
used for the VGA console where supported, and in some cases the EFI
framebuffer or vga16fb.
Now that we have a definite list of which architectures actually use it
for what, use consistent #ifdef checks so the global variable is only
defined when it is actually used on those architectures.
Loongarch and riscv have no support for vgacon or vga16fb, but
they support EFI firmware, so only that needs to be checked, and the
initialization can be removed because that is handled by EFI.
IA64 has both vgacon and EFI, though EFI apparently never uses
a framebuffer here.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Khalid Aziz <[email protected]>
Acked-by: Helge Deller <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If configuration options SOFTIRQ_ON_OWN_STACK and PREEMPT_RT
are enabled simultaneously under RISC-V architecture,
it will result in a compilation failure:
arch/riscv/kernel/irq.c:64:6: error: redefinition of 'do_softirq_own_stack'
64 | void do_softirq_own_stack(void)
| ^~~~~~~~~~~~~~~~~~~~
In file included from ./arch/riscv/include/generated/asm/softirq_stack.h:1,
from arch/riscv/kernel/irq.c:15:
./include/asm-generic/softirq_stack.h:8:20: note: previous definition of 'do_softirq_own_stack' was here
8 | static inline void do_softirq_own_stack(void)
| ^~~~~~~~~~~~~~~~~~~~
After changing CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK to CONFIG_SOFTIRQ_ON_OWN_STACK,
compilation can be successful.
Fixes: dd69d07a5a6c ("riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK")
Reviewed-by: Guo Ren <[email protected]>
Signed-off-by: Jiexun Wang <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
When testing on risc-v QEMU environment with "crashkernel="
parameter enabled, a problem occurred with the following
message:
[ 0.000000] crashkernel low memory reserved: 0xf8000000 - 0x100000000 (128 MB)
[ 0.000000] crashkernel reserved: 0x0000000177e00000 - 0x0000000277e00000 (4096 MB)
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:779 __insert_resource+0x8e/0xd0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc2-next-20230920 #1
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] epc : __insert_resource+0x8e/0xd0
[ 0.000000] ra : insert_resource+0x28/0x4e
[ 0.000000] epc : ffffffff80017344 ra : ffffffff8001742e sp : ffffffff81203db0
[ 0.000000] gp : ffffffff812ece98 tp : ffffffff8120dac0 t0 : ff600001f7ff2b00
[ 0.000000] t1 : 0000000000000000 t2 : 3428203030303030 s0 : ffffffff81203dc0
[ 0.000000] s1 : ffffffff81211e18 a0 : ffffffff81211e18 a1 : ffffffff81289380
[ 0.000000] a2 : 0000000277dfffff a3 : 0000000177e00000 a4 : 0000000177e00000
[ 0.000000] a5 : ffffffff81289380 a6 : 0000000277dfffff a7 : 0000000000000078
[ 0.000000] s2 : ffffffff81289380 s3 : ffffffff80a0bac8 s4 : ff600001f7ff2880
[ 0.000000] s5 : 0000000000000280 s6 : 8000000a00006800 s7 : 000000000000007f
[ 0.000000] s8 : 0000000080017038 s9 : 0000000080038ea0 s10: 0000000000000000
[ 0.000000] s11: 0000000000000000 t3 : ffffffff80a0bc00 t4 : ffffffff80a0bc00
[ 0.000000] t5 : ffffffff80a0bbd0 t6 : ffffffff80a0bc00
[ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 0.000000] [<ffffffff80017344>] __insert_resource+0x8e/0xd0
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Failed to add a Crash kernel resource at 177e00000
The crashkernel memory has been allocated successfully, whereas
it failed to insert into iomem_resource. This is due to the
unique reserving logic in risc-v arch specific code, i.e.
crashk_res/crashk_low_res will be added into iomem_resource
later in init_resources(), which is not aligned with current
unified reserving logic in reserve_crashkernel_{generic,low}()
and therefore leads to the failure of crashkernel reservation.
Removing the arch specific code within #ifdef CONFIG_KEXEC_CORE
in init_resources() to fix above problem.
Fixes: 31549153088e ("riscv: kdump: use generic interface to simplify crashkernel reservation")
Signed-off-by: Chen Jiahao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The RISC-V integer conditional (Zicond) operation extension defines
standard conditional arithmetic and conditional-select/move operations
which are inspired from the XVentanaCondOps extension. In fact, QEMU
RISC-V also has support for emulating Zicond extension.
Let us detect Zicond extension from ISA string available through
DT or ACPI.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Extend the ISA string parsing to detect the Smstateen extension. If the
extension is enabled then access to certain 'state' such as AIA CSRs in
VS mode is controlled by *stateen0 registers.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The alternative stack checking in get_sigframe introduced by the Vector
support is not needed and has a problem. It is not needed as we have
already validate it at the beginning of the function if we are already
on an altstack. If not, the size of an altstack is always validated at
its allocation stage with sigaltstack_size_valid().
Besides, we must only regard the size of an altstack if the handler of a
signal is registered with SA_ONSTACK. So, blindly checking overflow of
an altstack if sas_ss_size not equals to zero will check against wrong
signal handlers if only a subset of signals are registered with
SA_ONSTACK.
Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector")
Reported-by: Prashanth Swaminathan <[email protected]>
Signed-off-by: Andy Chiu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel element from riscv_v_default_vstate_table. This removal
is safe because register_sysctl implicitly uses ARRAY_SIZE() in addition
to checking for the sentinel.
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Expose Zicboz through hwprobe and also provide a key to extract its
respective block size. Opportunistically add a macro and apply it to
current extensions in order to avoid duplicating code.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
When Zicboz is present, enable its instruction (cbo.zero) in
usermode by setting its respective senvcfg bit. We don't bother
trying to set this bit per-task, which would also require an
interface for tasks to request enabling and/or disabling. Instead,
permanently set the bit for each hart which has the extension when
bringing it online.
This patch also introduces riscv_cpu_has_extension_[un]likely()
functions to check a specific hart's ISA bitmap for extensions.
Prior to checking the specific hart's bitmap in these functions
we try the bitmap which represents the LCD of extensions, but only
when we know it will use its optimized, alternatives path by gating
its call on CONFIG_RISCV_ALTERNATIVE. When alternatives are used, the
compiler ensures that the invocation of the LCD search becomes a
constant true or false. When it's true, even the new functions will
completely vanish from their callsites. OTOH, when the LCD check is
false, we need to do a search of the hart's ISA bitmap. Had we also
checked the LCD bitmap without the use of alternatives, then we would
have ended up with two bitmap searches instead of one.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
commit c818fea83de4 ("riscv: say disabling zicbom if no or bad
riscv,cbom-block-size found") improved the error messages for
zicbom but zicboz was missed since its patches were in flight
at the same time. Get 'em now.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
RISC-V software breakpoint trap handlers are used for {k,u}probes.
When trapping from kernelmode, only the kernelmode handlers should be
considered. Vice versa, only usermode handlers for usermode
traps. This is not the case on RISC-V, which can trigger a bug if a
userspace process uses uprobes, and a WARN() is triggered from
kernelmode (which is implemented via {c.,}ebreak).
The kernel will trap on the kernelmode {c.,}ebreak, look for uprobes
handlers, realize incorrectly that uprobes need to be handled, and
exit the trap handler early. The trap returns to re-executing the
{c.,}ebreak, and enter an infinite trap-loop.
The issue was found running the BPF selftest [1].
Fix this issue by only considering the swbp/ss handlers for
kernel/usermode respectively. Also, move CONFIG ifdeffery from traps.c
to the asm/{k,u}probes.h headers.
Note that linux/uprobes.h only include asm/uprobes.h if CONFIG_UPROBES
is defined, which is why asm/uprobes.h needs to be unconditionally
included in traps.c
Link: https://lore.kernel.org/linux-riscv/[email protected]/ # [1]
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Nam Cao <[email protected]>
Tested-by: Puranjay Mohan <[email protected]>
Signed-off-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The current riscv boot protocol requires 2MB alignment for RV64
and 4MB alignment for RV32.
In KEXEC_FILE path, the elf_find_pbase() function should align
the kexeced kernel entry according to the requirement, otherwise
the kexeced kernel would silently BUG at the setup_vm().
Fixes: 8acea455fafa ("RISC-V: Support for kexec_file on panic")
Signed-off-by: Song Shuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
For readability and simplicity, cleanup the riscv_kexec_relocate code:
- Re-sort the first 4 `mv` instructions against `riscv_kexec_method()`
- Eliminate registers for debugging (s9,s10,s11) and storing const-value (s5,s6)
- Replace `jalr` with `jr` for no-link jump
I tested this on Qemu virt machine and works as it was.
Signed-off-by: Song Shuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The current riscv boot protocol requires 2MB alignment for RV64
and 4MB alignment for RV32.
In KEXEC_FILE path, the elf_find_pbase() function should align
the kexeced kernel entry according to the requirement, otherwise
the kexeced kernel would silently BUG at the setup_vm().
Fixes: 8acea455fafa ("RISC-V: Support for kexec_file on panic")
Signed-off-by: Song Shuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Puranjay Mohan <[email protected]> says:
Here is some data to prove the V2 fixes the problem:
Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m47.562s
user 0m24.145s
sys 6m37.064s
With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m29.472s
user 0m25.865s
sys 6m18.401s
BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.
Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.
I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.
This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.
======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================
Test setup:
===========
Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1
To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.
The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.
The script was run with following perf command:
./run.sh "perf stat -a \
-e iTLB-load-misses \
-e dTLB-load-misses \
-e dTLB-store-misses \
-e instructions \
--timeout 60000"
The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.
The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.
Results
=======
Before enabling prog pack allocator:
------------------------------------
Performance counter stats for 'system wide':
4939048 iTLB-load-misses
5468689 dTLB-load-misses
465234 dTLB-store-misses
1441082097998 instructions
60.045791200 seconds time elapsed
After enabling prog pack allocator:
-----------------------------------
Performance counter stats for 'system wide':
3430035 iTLB-load-misses
5008745 dTLB-load-misses
409944 dTLB-store-misses
1441535637988 instructions
60.046296600 seconds time elapsed
Improvements in metrics
=======================
It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.
--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------
I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.
This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs
[1] https://lore.kernel.org/bpf/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
[3] https://lore.kernel.org/all/[email protected]/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards
* b4-shazam-merge:
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Alexandre Ghiti <[email protected]> says:
The following KASLR implementation allows to randomize the kernel mapping:
- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
hence the patch 3 factorizes KASLR related functions for riscv to take
advantage.
The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.
* b4-shazam-merge:
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|