aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2020-09-17KVM: PPC: Book3S HV: Do not allocate HPT for a nested guestFabiano Rosas1-0/+6
The current nested KVM code does not support HPT guests. This is informed/enforced in some ways: - Hosts < P9 will not be able to enable the nested HV feature; - The nested hypervisor MMU capabilities will not contain KVM_CAP_PPC_MMU_HASH_V3; - QEMU reflects the MMU capabilities in the 'ibm,arch-vec-5-platform-support' device-tree property; - The nested guest, at 'prom_parse_mmu_model' ignores the 'disable_radix' kernel command line option if HPT is not supported; - The KVM_PPC_CONFIGURE_V3_MMU ioctl will fail if trying to use HPT. There is, however, still a way to start a HPT guest by using max-compat-cpu=power8 at the QEMU machine options. This leads to the guest being set to use hash after QEMU calls the KVM_PPC_ALLOCATE_HTAB ioctl. With the guest set to hash, the nested hypervisor goes through the entry path that has no knowledge of nesting (kvmppc_run_vcpu) and crashes when it tries to execute an hypervisor-privileged (mtspr HDEC) instruction at __kvmppc_vcore_entry: root@L1:~ $ qemu-system-ppc64 -machine pseries,max-cpu-compat=power8 ... <snip> [ 538.543303] CPU: 83 PID: 25185 Comm: CPU 0/KVM Not tainted 5.9.0-rc4 #1 [ 538.543355] NIP: c00800000753f388 LR: c00800000753f368 CTR: c0000000001e5ec0 [ 538.543417] REGS: c0000013e91e33b0 TRAP: 0700 Not tainted (5.9.0-rc4) [ 538.543470] MSR: 8000000002843033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 22422882 XER: 20040000 [ 538.543546] CFAR: c00800000753f4b0 IRQMASK: 3 GPR00: c0080000075397a0 c0000013e91e3640 c00800000755e600 0000000080000000 GPR04: 0000000000000000 c0000013eab19800 c000001394de0000 00000043a054db72 GPR08: 00000000003b1652 0000000000000000 0000000000000000 c0080000075502e0 GPR12: c0000000001e5ec0 c0000007ffa74200 c0000013eab19800 0000000000000008 GPR16: 0000000000000000 c00000139676c6c0 c000000001d23948 c0000013e91e38b8 GPR20: 0000000000000053 0000000000000000 0000000000000001 0000000000000000 GPR24: 0000000000000001 0000000000000001 0000000000000000 0000000000000001 GPR28: 0000000000000001 0000000000000053 c0000013eab19800 0000000000000001 [ 538.544067] NIP [c00800000753f388] __kvmppc_vcore_entry+0x90/0x104 [kvm_hv] [ 538.544121] LR [c00800000753f368] __kvmppc_vcore_entry+0x70/0x104 [kvm_hv] [ 538.544173] Call Trace: [ 538.544196] [c0000013e91e3640] [c0000013e91e3680] 0xc0000013e91e3680 (unreliable) [ 538.544260] [c0000013e91e3820] [c0080000075397a0] kvmppc_run_core+0xbc8/0x19d0 [kvm_hv] [ 538.544325] [c0000013e91e39e0] [c00800000753d99c] kvmppc_vcpu_run_hv+0x404/0xc00 [kvm_hv] [ 538.544394] [c0000013e91e3ad0] [c0080000072da4fc] kvmppc_vcpu_run+0x34/0x48 [kvm] [ 538.544472] [c0000013e91e3af0] [c0080000072d61b8] kvm_arch_vcpu_ioctl_run+0x310/0x420 [kvm] [ 538.544539] [c0000013e91e3b80] [c0080000072c7450] kvm_vcpu_ioctl+0x298/0x778 [kvm] [ 538.544605] [c0000013e91e3ce0] [c0000000004b8c2c] sys_ioctl+0x1dc/0xc90 [ 538.544662] [c0000013e91e3dc0] [c00000000002f9a4] system_call_exception+0xe4/0x1c0 [ 538.544726] [c0000013e91e3e20] [c00000000000d140] system_call_common+0xf0/0x27c [ 538.544787] Instruction dump: [ 538.544821] f86d1098 60000000 60000000 48000099 e8ad0fe8 e8c500a0 e9264140 75290002 [ 538.544886] 7d1602a6 7cec42a6 40820008 7d0807b4 <7d164ba6> 7d083a14 f90d10a0 480104fd [ 538.544953] ---[ end trace 74423e2b948c2e0c ]--- This patch makes the KVM_PPC_ALLOCATE_HTAB ioctl fail when running in the nested hypervisor, causing QEMU to abort. Reported-by: Satheesh Rajendran <[email protected]> Signed-off-by: Fabiano Rosas <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Reviewed-by: David Gibson <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2020-09-17KVM: PPC: Don't return -ENOTSUPP to userspace in ioctlsGreg Kurz2-5/+5
ENOTSUPP is a linux only thingy, the value of which is unknown to userspace, not to be confused with ENOTSUP which linux maps to EOPNOTSUPP, as permitted by POSIX [1]: [EOPNOTSUPP] Operation not supported on socket. The type of socket (address family or protocol) does not support the requested operation. A conforming implementation may assign the same values for [EOPNOTSUPP] and [ENOTSUP]. Return -EOPNOTSUPP instead of -ENOTSUPP for the following ioctls: - KVM_GET_FPU for Book3s and BookE - KVM_SET_FPU for Book3s and BookE - KVM_GET_DIRTY_LOG for BookE This doesn't affect QEMU which doesn't call the KVM_GET_FPU and KVM_SET_FPU ioctls on POWER anyway since they are not supported, and _buggily_ ignores anything but -EPERM for KVM_GET_DIRTY_LOG. [1] https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html Signed-off-by: Greg Kurz <[email protected]> Acked-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2020-09-16PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectableThomas Gleixner1-0/+1
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture requires them or not. Architectures which are fully utilizing hierarchical irq domains should never call into that code. It's not only architectures which depend on that by implementing one or more of the weak functions, there is also a bunch of drivers which relies on the weak functions which invoke msi_controller::setup_irq[s] and msi_controller::teardown_irq. Make the architectures and drivers which rely on them select them in Kconfig and if not selected replace them by stub functions which emit a warning and fail the PCI/MSI interrupt allocation. Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Implement cpu_to_coregroup_idSrikar Dronamraju1-0/+20
Lookup the coregroup id from the associativity array. If unable to detect the coregroup id, fallback on the core id. This way, ensure sched_domain degenerates and an extra sched domain is not created. Ideally this function should have been implemented in arch/powerpc/kernel/smp.c. However if its implemented in mm/numa.c, we don't need to find the primary domain again. If the device-tree mentions more than one coregroup, then kernel implements only the last or the smallest coregroup, which currently corresponds to the penultimate domain in the device-tree. Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Create coregroup domainSrikar Dronamraju3-1/+68
Add percpu coregroup maps and masks to create coregroup domain. If a coregroup doesn't exist, the coregroup domain will be degenerated in favour of SMT/CACHE domain. Do note this patch is only creating stubs for cpu_to_coregroup_id. The actual cpu_to_coregroup_id implementation would be in a subsequent patch. Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Allocate cpumask only after searching thread groupSrikar Dronamraju1-4/+3
If allocated earlier and the search fails, then cpu_l1_cache_map cpumask is unnecessarily cleared. However cpu_l1_cache_map can be allocated / cleared after we search thread group. Please note CONFIG_CPUMASK_OFFSTACK is not set on Powerpc. Hence cpumask allocated by zalloc_cpumask_var_node is never freed. Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/numa: Detect support for coregroupSrikar Dronamraju3-13/+23
Add support for grouping cores based on the device-tree classification. - The last domain in the associativity domains always refers to the core. - If primary reference domain happens to be the penultimate domain in the associativity domains device-tree property, then there are no coregroups. However if its not a penultimate domain, then there are coregroups. There can be more than one coregroup. For now we would be interested in the last or the smallest coregroups, i.e one sub-group per DIE. Currently there are no firmwares that are exposing this grouping. Hence allow the basis for grouping to be abstract. Once the firmware starts using this grouping, code would be added to detect the type of grouping and adjust the sd domain flags accordingly. Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Optimize start_secondarySrikar Dronamraju1-6/+11
In start_secondary, even if shared_cache was already set, system does a redundant match for cpumask. This redundant check can be removed by checking if shared_cache is already set. While here, localize the sibling_mask variable to within the if condition. Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Dont assume l2-cache to be superset of siblingSrikar Dronamraju1-14/+29
Current code assumes that cpumask of cpus sharing a l2-cache mask will always be a superset of cpu_sibling_mask. Lets stop that assumption. cpu_l2_cache_mask is a superset of cpu_sibling_mask if and only if shared_caches is set. Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Move topology fixups into a new functionSrikar Dronamraju1-6/+11
Move topology fixup based on the platform attributes into its own function which is called just before set_sched_topology. Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Move powerpc_topology aboveSrikar Dronamraju1-52/+52
Just moving the powerpc_topology description above. This will help in using functions in this file and avoid declarations. No other functional changes Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Merge Power9 topology with Power topologySrikar Dronamraju1-22/+3
A new sched_domain_topology_level was added just for Power9. However the same can be achieved by merging powerpc_topology with power9_topology and makes the code more simpler especially when adding a new sched domain. Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/smp: Fix a warning under !NEED_MULTIPLE_NODESSrikar Dronamraju1-0/+2
Fix a build warning in a non CONFIG_NEED_MULTIPLE_NODES "error: _numa_cpu_lookup_table_ undeclared" Signed-off-by: Srikar Dronamraju <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/numa: Offline memoryless cpuless node 0Srikar Dronamraju1-0/+10
Currently Linux kernel with CONFIG_NUMA on a system with multiple possible nodes, marks node 0 as online at boot. However in practice, there are systems which have node 0 as memoryless and cpuless. This can cause numa_balancing to be enabled on systems with only one node with memory and CPUs. The existence of this dummy node which is cpuless and memoryless node can confuse users/scripts looking at output of lscpu / numactl. By marking, node 0 as offline, lets stop assuming that node 0 is always online. If node 0 has CPU or memory that are online, node 0 will again be set as online. v5.8 available: 2 nodes (0,2) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 2 cpus: 0 1 2 3 4 5 6 7 node 2 size: 32625 MB node 2 free: 31490 MB node distances: node 0 2 0: 10 20 2: 20 10 proc and sys files ------------------ /sys/devices/system/node/online: 0,2 /proc/sys/kernel/numa_balancing: 1 /sys/devices/system/node/has_cpu: 2 /sys/devices/system/node/has_memory: 2 /sys/devices/system/node/has_normal_memory: 2 /sys/devices/system/node/possible: 0-31 v5.8 + patch ------------------ available: 1 nodes (2) node 2 cpus: 0 1 2 3 4 5 6 7 node 2 size: 32625 MB node 2 free: 31487 MB node distances: node 2 2: 10 proc and sys files ------------------ /sys/devices/system/node/online: 2 /proc/sys/kernel/numa_balancing: 0 /sys/devices/system/node/has_cpu: 2 /sys/devices/system/node/has_memory: 2 /sys/devices/system/node/has_normal_memory: 2 /sys/devices/system/node/possible: 0-31 Example of a node with online CPUs/memory on node 0. (Same o/p with and without patch) numactl -H available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 node 0 size: 32482 MB node 0 free: 22994 MB node 1 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 node 1 size: 0 MB node 1 free: 0 MB node 2 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 node 2 size: 0 MB node 2 free: 0 MB node 3 cpus: 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 node 3 size: 0 MB node 3 free: 0 MB node distances: node 0 1 2 3 0: 10 20 40 40 1: 20 10 40 40 2: 40 40 10 20 3: 40 40 20 10 Note: On Powerpc, cpu_to_node of possible but not present cpus would previously return 0. Hence this commit depends on commit ("powerpc/numa: Set numa_node for all possible cpus") and commit ("powerpc/numa: Prefer node id queried from vphn"). Without the 2 commits, Powerpc system might crash. 1. User space applications like Numactl, lscpu, that parse the sysfs tend to believe there is an extra online node. This tends to confuse users and applications. Other user space applications start believing that system was not able to use all the resources (i.e missing resources) or the system was not setup correctly. 2. Also existence of dummy node also leads to inconsistent information. The number of online nodes is inconsistent with the information in the device-tree and resource-dump 3. When the dummy node is present, single node non-Numa systems end up showing up as NUMA systems and numa_balancing gets enabled. This will mean we take the hit from the unnecessary numa hinting faults. Signed-off-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/numa: Prefer node id queried from vphnSrikar Dronamraju1-9/+10
Node id queried from the static device tree may not be correct. For example: it may always show 0 on a shared processor. Hence prefer the node id queried from vphn and fallback on the device tree based node id if vphn query fails. Signed-off-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/numa: Set numa_node for all possible cpusSrikar Dronamraju1-1/+15
A Powerpc system with multiple possible nodes and with CONFIG_NUMA enabled always used to have a node 0, even if node 0 does not any cpus or memory attached to it. As per PAPR, node affinity of a cpu is only available once its present / online. For all cpus that are possible but not present, cpu_to_node() would point to node 0. To ensure a cpuless, memoryless dummy node is not online, powerpc need to make sure all possible but not present cpu_to_node are set to a proper node. Signed-off-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/numa: Restrict possible nodes based on platformSrikar Dronamraju1-3/+12
As per draft LoPAPR (Revision 2.9_pre7), section B.5.3 "Run Time Abstraction Services (RTAS) Node" available at: https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200611.pdf ... there are 2 device tree properties: "ibm,max-associativity-domains" which defines the maximum number of domains that the firmware i.e PowerVM can support. and: "ibm,current-associativity-domains" which defines the maximum number of domains that the current platform can support. The value of "ibm,max-associativity-domains" is always greater than or equal to "ibm,current-associativity-domains" property. If the latter property is not available, use "ibm,max-associativity-domain" as a fallback. In this yet to be released LoPAPR, "ibm,current-associativity-domains" is mentioned in page 833 / B.5.3 which is covered under under "Appendix B. System Binding" section Currently powerpc uses the "ibm,max-associativity-domains" property while setting the possible number of nodes. This is currently set at 32. However the possible number of nodes for a platform may be significantly less. Hence set the possible number of nodes based on "ibm,current-associativity-domains" property. Nathan Lynch had raised a valid concern that post LPM (Live Partition Migration), a user could DLPAR add processors and memory after LPM with "new" associativity properties: https://lore.kernel.org/linuxppc-dev/[email protected]/t/#u He also pointed out that "ibm,max-associativity-domains" has the same contents on all currently available PowerVM systems, unlike "ibm,current-associativity-domains" and hence may be better able to handle the new NUMA associativity properties. However with the recent commit dbce45628085 ("powerpc/numa: Limit possible nodes to within num_possible_nodes"), all new NUMA associativity properties are capped to initially set nr_node_ids. Hence this commit should be safe with any new DLPAR add post LPM. $ lsprop /proc/device-tree/rtas/ibm,*associ*-domains /proc/device-tree/rtas/ibm,current-associativity-domains 00000005 00000001 00000002 00000002 00000002 00000010 /proc/device-tree/rtas/ibm,max-associativity-domains 00000005 00000001 00000008 00000020 00000020 00000100 $ cat /sys/devices/system/node/possible ##Before patch 0-31 $ cat /sys/devices/system/node/possible ##After patch 0-1 Note the maximum nodes this platform can support is only 2 but the possible nodes is set to 32. This is important because lot of kernel and user space code allocate structures for all possible nodes leading to a lot of memory that is allocated but not used. I ran a simple experiment to create and destroy 100 memory cgroups on boot on a 8 node machine (Power8 Alpine). Before patch: free -k at boot total used free shared buff/cache available Mem: 523498176 4106816 518820608 22272 570752 516606720 Swap: 4194240 0 4194240 free -k after creating 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4628416 518246464 22336 623296 516058688 Swap: 4194240 0 4194240 free -k after destroying 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4697408 518173760 22400 627008 515987904 Swap: 4194240 0 4194240 After patch: free -k at boot total used free shared buff/cache available Mem: 523498176 3969472 518933888 22272 594816 516731776 Swap: 4194240 0 4194240 free -k after creating 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4181888 518676096 22208 640192 516496448 Swap: 4194240 0 4194240 free -k after destroying 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4232320 518619904 22272 645952 516443264 Swap: 4194240 0 4194240 Observations: Fixed kernel takes 137344 kb (4106816-3969472) less to boot. Fixed kernel takes 309184 kb (4628416-4181888-137344) less to create 100 memcgs. Signed-off-by: Srikar Dronamraju <[email protected]> [mpe: Reformat change log a bit for readability] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/topology: Override cpu_smt_maskSrikar Dronamraju2-1/+13
On Power9, a pair of SMT4 cores can be presented by the firmware as a SMT8 core for backward compatibility reasons, with the fusion of two SMT4 cores. Powerpc allows LPARs to be live migrated from Power8 to Power9. Existing software developed/configured for Power8, expects to see a SMT8 core. In order to maintain userspace backward compatibility (with Power8 chips in case of Power9) in enterprise Linux systems, the topology_sibling_cpumask has to be set to SMT8 core. cpu_smt_mask() should generally point to the cpu mask of the SMT4 core. Hence override the default cpu_smt_mask() to be powerpc specific allowing for better scheduling behaviour on Power. schbench (latency measured in usecs, so lesser is better) Without patch With patch Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 34 50.0000th: 38 75.0000th: 47 75.0000th: 52 90.0000th: 54 90.0000th: 60 95.0000th: 57 95.0000th: 64 *99.0000th: 62 *99.0000th: 72 99.5000th: 65 99.5000th: 75 99.9000th: 76 99.9000th: 3452 min=0, max=9205 min=0, max=9344 schbench (With Cede disabled) Without patch With patch Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 20 50.0000th: 21 75.0000th: 28 75.0000th: 29 90.0000th: 33 90.0000th: 34 95.0000th: 35 95.0000th: 37 *99.0000th: 40 *99.0000th: 40 99.5000th: 48 99.5000th: 42 99.9000th: 94 99.9000th: 79 min=0, max=791 min=0, max=791 perf bench sched pipe usec/ops : lesser is better Without patch N Min Max Median Avg Stddev 101 5.095113 5.595269 5.204842 5.2298776 0.10762713 5.10 - 5.15 : ################################################## 23% (24) 5.15 - 5.20 : ############################################# 21% (22) 5.20 - 5.25 : ################################################## 23% (24) 5.25 - 5.30 : ######################### 11% (12) 5.30 - 5.35 : ########## 4% (5) 5.35 - 5.40 : ######## 3% (4) 5.40 - 5.45 : ######## 3% (4) 5.45 - 5.50 : #### 1% (2) 5.50 - 5.55 : ## 0% (1) 5.55 - 5.60 : #### 1% (2) With patch N Min Max Median Avg Stddev 101 5.134675 8.524719 5.207658 5.2780985 0.34911969 5.1 - 5.5 : ################################################## 94% (95) 5.5 - 5.8 : ## 3% (4) 5.8 - 6.2 : 0% (1) 6.2 - 6.5 : 6.5 - 6.8 : 6.8 - 7.2 : 7.2 - 7.5 : 7.5 - 7.8 : 7.8 - 8.2 : 8.2 - 8.5 : perf bench sched pipe (cede disabled) usec/ops : lesser is better Without patch N Min Max Median Avg Stddev 101 7.884227 12.576538 7.956474 8.0170722 0.46159054 7.9 - 8.4 : ################################################## 99% (100) 8.4 - 8.8 : 8.8 - 9.3 : 9.3 - 9.8 : 9.8 - 10.2 : 10.2 - 10.7 : 10.7 - 11.2 : 11.2 - 11.6 : 11.6 - 12.1 : 12.1 - 12.6 : With patch N Min Max Median Avg Stddev 101 7.956021 8.217284 8.015615 8.0283866 0.049844967 7.96 - 7.98 : ###################### 12% (13) 7.98 - 8.01 : ################################################## 28% (29) 8.01 - 8.03 : #################################### 20% (21) 8.03 - 8.06 : ######################### 14% (15) 8.06 - 8.09 : ###################### 12% (13) 8.09 - 8.11 : ###### 3% (4) 8.11 - 8.14 : ### 1% (2) 8.14 - 8.17 : ### 1% (2) 8.17 - 8.19 : 8.19 - 8.22 : # 0% (1) Observations: With the patch, the initial run/iteration takes a slight longer time. This can be attributed to the fact that now we pick a CPU from a idle core which could be sleep mode. Once we remove the cede, state the numbers improve in favour of the patch. ebizzy: transactions per second (higher is better) without patch N Min Max Median Avg Stddev 100 1018433 1304470 1193208 1182315.7 60018.733 1018433 - 1047037 : ###### 3% (3) 1047037 - 1075640 : ######## 4% (4) 1075640 - 1104244 : ######## 4% (4) 1104244 - 1132848 : ############### 7% (7) 1132848 - 1161452 : #################################### 17% (17) 1161452 - 1190055 : ########################## 12% (12) 1190055 - 1218659 : ############################################# 21% (21) 1218659 - 1247263 : ################################################## 23% (23) 1247263 - 1275866 : ######## 4% (4) 1275866 - 1304470 : ######## 4% (4) with patch N Min Max Median Avg Stddev 100 967014 1292938 1208819 1185281.8 69815.851 967014 - 999606 : ## 1% (1) 999606 - 1032199 : ## 1% (1) 1032199 - 1064791 : ############ 6% (6) 1064791 - 1097384 : ########## 5% (5) 1097384 - 1129976 : ################## 9% (9) 1129976 - 1162568 : #################### 10% (10) 1162568 - 1195161 : ########################## 13% (13) 1195161 - 1227753 : ############################################ 22% (22) 1227753 - 1260346 : ################################################## 25% (25) 1260346 - 1292938 : ############## 7% (7) Observations: Not much changes, ebizzy is not much impacted. Signed-off-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/papr_scm: Fix warning triggered by perf_stats_show()Vaibhav Jain1-2/+3
A warning is reported by the kernel in case perf_stats_show() returns an error code. The warning is of the form below: papr_scm ibm,persistent-memory:ibm,pmemory@44100001: Failed to query performance stats, Err:-10 dev_attr_show: perf_stats_show+0x0/0x1c0 [papr_scm] returned bad count fill_read_buffer: dev_attr_show+0x0/0xb0 returned bad count On investigation it looks like that the compiler is silently truncating the return value of drc_pmem_query_stats() from 'long' to 'int', since the variable used to store the return code 'rc' is an 'int'. This truncated value is then returned back as a 'ssize_t' back from perf_stats_show() to 'dev_attr_show()' which thinks of it as a large unsigned number and triggers this warning.. To fix this we update the type of variable 'rc' from 'int' to 'ssize_t' that prevents the compiler from truncating the return value of drc_pmem_query_stats() and returning correct signed value back from perf_stats_show(). Fixes: 2d02bf835e57 ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP") Signed-off-by: Vaibhav Jain <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mmNicholas Piggin2-20/+16
Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of a process under certain conditions. One of the assumptions is that mm_users would not be incremented via a reference outside the process context with mmget_not_zero() then go on to kthread_use_mm() via that reference. That invariant was broken by io_uring code (see previous sparc64 fix), but I'll point Fixes: to the original powerpc commit because we are changing that assumption going forward, so this will make backports match up. Fix this by no longer relying on that assumption, but by having each CPU check the mm is not being used, and clearing their own bit from the mask only if it hasn't been switched-to by the time the IPI is processed. This relies on commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm switch sequences. Fixes: 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") Signed-off-by: Nicholas Piggin <[email protected]> Reviewed-by: Michael Ellerman <[email protected]> Depends-on: 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate") Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16powerpc: select ARCH_WANT_IRQS_OFF_ACTIVATE_MMNicholas Piggin2-1/+2
powerpc uses IPIs in some situations to switch a kernel thread away from a lazy tlb mm, which is subject to the TLB flushing race described in the changelog introducing ARCH_WANT_IRQS_OFF_ACTIVATE_MM. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-15powerpc/pci: unmap legacy INTx interrupts when a PHB is removedCédric Le Goater2-0/+120
When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed. To solve this problem, we introduce a PPC platform specific pcibios_remove_bus() routine which clears all interrupt mappings when the bus is removed. This also clears the associated page table entries of the ESB pages when using XIVE. For this purpose, we record the logical interrupt numbers of the mapped interrupt under the PHB structure and let pcibios_remove_bus() do the clean up. Since some PCI adapters, like GPUs, use the "interrupt-map" property to describe interrupt mappings other than the legacy INTx interrupts, we can not restrict the size of the mapping array to PCI_NUM_INTX. The number of interrupt mappings is computed from the "interrupt-map" property and the mapping array is allocated accordingly. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-15powerpc/powernv/idle: add a basic stop 0-3 driver for POWER10Nicholas Piggin4-96/+211
This driver does not restore stop > 3 state, so it limits itself to states which do not lose full state or TB. The POWER10 SPRs are sufficiently different from P9 that it seems easier to split out the P10 code. The POWER10 deep sleep code (e.g., the BHRB restore) has been taken out, but it can be re-added when stop > 3 support is added. Signed-off-by: Nicholas Piggin <[email protected]> Tested-by: Pratik Rajesh Sampat<[email protected]> Tested-by: Vaidyanathan Srinivasan <[email protected]> Reviewed-by: Pratik Rajesh Sampat<[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-15powerepc/book3s64/hash: Align start/end address correctly with bolt mappingAneesh Kumar K.V2-3/+10
This ensures we don't do a partial mapping of memory. With nvdimm, when creating namespaces with size not aligned to 16MB, the kernel ends up partially mapping the pages. This can result in kernel adding multiple hash page table entries for the same range. A new namespace will result in create_section_mapping() with start and end overlapping an already existing bolted hash page table entry. commit: 6acd7d5ef264 ("libnvdimm/namespace: Enforce memremap_compat_align()") made sure that we always create namespaces aligned to 16MB. But we can do better by avoiding mapping pages that are not aligned. This helps to catch access to these partially mapped pages early. Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-15powerpc/ps3: make two symbols staticJason Yan1-2/+2
This addresses the following sparse warning: arch/powerpc/platforms/ps3/spu.c:451:33: warning: symbol 'spu_management_ps3_ops' was not declared. Should it be static? arch/powerpc/platforms/ps3/spu.c:592:28: warning: symbol 'spu_priv1_ps3_ops' was not declared. Should it be static? Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-15powerpc/kasan: Fix CONFIG_KASAN_VMALLOC for 8xxChristophe Leroy1-3/+9
Before the commit identified below, pages tables allocation was performed after the allocation of final shadow area for linear memory. But that commit switched the order, leading to page tables being already allocated at the time 8xx kasan_init_shadow_8M() is called. Due to this, kasan_init_shadow_8M() doesn't map the needed shadow entries because there are already page tables. kasan_init_shadow_8M() installs huge PMD entries instead of page tables. We could at that time free the page tables, but there is no point in creating page tables that get freed before being used. Only book3s/32 hash needs early allocation of page tables. For other variants, we can keep the initial order and create remaining page tables after the allocation of final shadow memory for linear mem. Move back the allocation of shadow page tables for CONFIG_KASAN_VMALLOC into kasan_init() after the loop which creates final shadow memory for linear mem. Fixes: 41ea93cf7ba4 ("powerpc/kasan: Fix shadow pages allocation failure") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/8ae4554357da4882612644a74387ae05525b2aaa.1599800716.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/powermac: Fix low_sleep_handler with KUAP and KUEPChristophe Leroy2-9/+2
low_sleep_handler() has an hardcoded restore of segment registers that doesn't take KUAP and KUEP into account. Use head_32's load_segment_registers() routine instead. Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection") Fixes: 31ed2b13c48d ("powerpc/32s: Implement Kernel Userspace Execution Prevention.") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/21b05f7298c1b18f73e6e5b4cd5005aafa24b6da.1599820109.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Remove useless #ifdef CONFIG_PPC_FPUChristophe Leroy1-5/+4
Add a stub for __giveup_fpu() when CONFIG_PPC_FPU is not selected, as done for CONFIG_SPE and CONFIG_ALTIVEC. This allows to remove some #ifdef CONFIG_PPC_FPU. Also change one to IS_ENABLED(). Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/69c8b7954ceeccc6b849e52e1fa41b3a0f10f6c1.1597643221.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Remove useless #ifdef CONFIG_SPEChristophe Leroy2-14/+8
cpu_has_feature(CPU_FTR_SPE) returns false when CONFIG_SPE is not set. There is no need to enclose the test in an #ifdef CONFIG_SPE. Remove it. CPU_FTR_SPE only exists on 32 bits. Define it as 0 on 64 bits. We have a couple of places like: #ifdef CONFIG_SPE if (cpu_has_feature(CPU_FTR_SPE)) { do_something_that_requires_CONFIG_SPE } else { return -EINVAL; } #else return -EINVAL; #endif Replace them by a cleaner version: if (cpu_has_feature(CPU_FTR_SPE)) { #ifdef CONFIG_SPE do_something_that_requires_CONFIG_SPE #endif } else { return -EINVAL; } When CONFIG_SPE is not set, this resolves to an unconditional return of -EINVAL Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/698df8387555765b70ea42e4a7fa48141c309c1f.1597643221.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Remove useless #ifdef CONFIG_ALTIVECChristophe Leroy1-4/+0
cpu_has_feature(CPU_FTR_ALTIVEC) returns false when CONFIG_ALTIVEC is not set. There is no need to enclose the test in an #ifdef CONFIG_ALTIVEC. Remove it. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/03ba6b52344ca7c336df2bc6e3d31d736c804ae2.1597643221.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Remove useless #ifdef CONFIG_VSXChristophe Leroy1-12/+1
cpu_has_feature(CPU_FTR_VSX) returns false when CONFIG_VSX is not set. There is no need to enclose the test in an #ifdef CONFIG_VSX. Remove it. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/0eb61cf0dc66d781d47deb2228498cd61d03a754.1597643221.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Tag an #endif to help locate the matching #ifdef.Christophe Leroy1-1/+1
That #endif is more than 100 lines after the matching #ifdef, and there are several #ifdef/#else/#endif inbetween. Tag it as /* CONFIG_PPC_BOOK3S_64 */ to help locate the matching #ifdef. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/3612a8f8aaca16de3fc414a7e66293319d6e213c.1597643147.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Replace #ifdef CONFIG_KALLSYMS by IS_ENABLED()Christophe Leroy1-4/+4
The #ifdef CONFIG_KALLSYMS encloses some printk which can compile in all cases. Replace by IS_ENABLED(). Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/2d89732a9062b2cf2651728804e4b8f6c9b9358e.1597643164.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Replace an #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) ↵Christophe Leroy1-6/+7
by IS_ENABLED() The #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) encloses some printk which can be compiled in all cases. Replace by IS_ENABLED(). Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/a1b6ef3d657c8f249193442f56868fc358ea5b6c.1597643160.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Replace an #ifdef CONFIG_PPC_BOOK3S_64 by IS_ENABLED()Christophe Leroy1-3/+1
This #ifdef CONFIG_PPC_BOOK3S_64 calls preload_new_slb_context() when radix is not enabled. radix_enabled() is always defined, and the prototype for preload_new_slb_context() is always present, so the #ifdef is unneeded. Replace it by IS_ENABLED(). Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/d31506ca9bac9def68cf7424eded63fdc4fb6660.1597643167.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/process: Replace an #ifdef CONFIG_PPC_47x by IS_ENABLED()Christophe Leroy1-3/+2
isync() is always defined, no need for an #ifdef. Replace it by IS_ENABLED(CONFIG_PPC_47x). Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/ac8da0e3baa91dda805e1e492fd65aecd90c1fb5.1597643156.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/32: Fix vmap stack - Properly set r1 before activating MMUChristophe Leroy1-14/+29
We need r1 to be properly set before activating MMU, otherwise any new exception taken while saving registers into the stack in exception prologs will use the user stack, which is wrong and will even lockup or crash when KUAP is selected. Do that by switching the meaning of r11 and r1 until we have saved r1 to the stack: copy r1 into r11 and setup the new stack pointer in r1. To avoid complicating and impacting all generic and specific prolog code (and more), copy back r1 into r11 once r11 is save onto the stack. We could get rid of copying r1 back and forth at the cost of rewriting everything to use r1 instead of r11 all the way when CONFIG_VMAP_STACK is set, but the effort is probably not worth it. Fixes: 028474876f47 ("powerpc/32: prepare for CONFIG_VMAP_STACK") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/8f85e8752ac5af602db7237ef53d634f4f3d3892.1599486108.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/32: Fix vmap stack - Do not activate MMU before reading task structChristophe Leroy2-31/+6
We need r1 to be properly set before activating MMU, so reading task_struct->stack must be done with MMU off. This means we need an additional register to play with MSR bits while r11 now points to the stack. For that, move r10 back to CR (As is already done for hash MMU) and use r10. We still don't have r1 correct yet when we activate MMU. It is done in following patch. Fixes: 028474876f47 ("powerpc/32: prepare for CONFIG_VMAP_STACK") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/a027d447022a006c9c4958ac734128e577a3c5c1.1599486108.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/uaccess: Remove __put_user_asm() and __put_user_asm2()Christophe Leroy1-36/+5
__put_user_asm() and __put_user_asm2() are not used anymore. Remove them. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/d66c4a372738d2fbd81f433ca86e4295871ace6a.1599216721.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/uaccess: Switch __patch_instruction() to __put_user_asm_goto()Christophe Leroy1-10/+7
__patch_instruction() is the only user of __put_user_asm() outside of asm/uaccess.h Switch to the new __put_user_asm_goto() to enable retirement of __put_user_asm() in a later patch. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/b9745b122f4a9ae72cef445c61320022ab8b77b7.1599216721.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/uaccess: Switch __put_user_size_allowed() to __put_user_asm_goto()Christophe Leroy1-7/+7
__put_user_asm_goto() provides more flexibility to GCC and avoids using a local variable to tell if the write succeeded or not. GCC can then avoid implementing a cmp in the fast path. See the difference for a small function like the PPC64 version of save_general_regs() in arch/powerpc/kernel/signal_32.c: Before the patch (unreachable nop removed): 0000000000000c10 <.save_general_regs>: c10: 39 20 00 2c li r9,44 c14: 39 40 00 00 li r10,0 c18: 7d 29 03 a6 mtctr r9 c1c: 38 c0 00 00 li r6,0 c20: 48 00 00 14 b c34 <.save_general_regs+0x24> c30: 42 40 00 40 bdz c70 <.save_general_regs+0x60> c34: 28 2a 00 27 cmpldi r10,39 c38: 7c c8 33 78 mr r8,r6 c3c: 79 47 1f 24 rldicr r7,r10,3,60 c40: 39 20 00 01 li r9,1 c44: 41 82 00 0c beq c50 <.save_general_regs+0x40> c48: 7d 23 38 2a ldx r9,r3,r7 c4c: 79 29 00 20 clrldi r9,r9,32 c50: 91 24 00 00 stw r9,0(r4) c54: 2c 28 00 00 cmpdi r8,0 c58: 39 4a 00 01 addi r10,r10,1 c5c: 38 84 00 04 addi r4,r4,4 c60: 41 82 ff d0 beq c30 <.save_general_regs+0x20> c64: 38 60 ff f2 li r3,-14 c68: 4e 80 00 20 blr c70: 38 60 00 00 li r3,0 c74: 4e 80 00 20 blr 0000000000000000 <.fixup>: cc: 39 00 ff f2 li r8,-14 d0: 48 00 00 00 b d0 <.fixup+0xd0> d0: R_PPC64_REL24 .text+0xc54 After the patch: 0000000000001490 <.save_general_regs>: 1490: 39 20 00 2c li r9,44 1494: 39 40 00 00 li r10,0 1498: 7d 29 03 a6 mtctr r9 149c: 60 00 00 00 nop 14a0: 28 2a 00 27 cmpldi r10,39 14a4: 79 48 1f 24 rldicr r8,r10,3,60 14a8: 39 20 00 01 li r9,1 14ac: 41 82 00 0c beq 14b8 <.save_general_regs+0x28> 14b0: 7d 23 40 2a ldx r9,r3,r8 14b4: 79 29 00 20 clrldi r9,r9,32 14b8: 91 24 00 00 stw r9,0(r4) 14bc: 39 4a 00 01 addi r10,r10,1 14c0: 38 84 00 04 addi r4,r4,4 14c4: 42 00 ff dc bdnz 14a0 <.save_general_regs+0x10> 14c8: 38 60 00 00 li r3,0 14cc: 4e 80 00 20 blr 14d0: 38 60 ff f2 li r3,-14 14d4: 4e 80 00 20 blr Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/94ba5a5138f99522e1562dbcdb38d31aa790dc89.1599216721.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/uaccess: Add pre-update addressing to __put_user_asm_goto()Christophe Leroy1-1/+1
Enable pre-update addressing mode in __put_user_asm_goto() Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/346f65d677adb11865f7762c25a1ca3c64404ba5.1599216023.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/8xx: Support 16k hugepages with 4k pagesChristophe Leroy5-5/+22
The 8xx has 4 page sizes: 4k, 16k, 512k and 8M 4k and 16k can be selected at build time as standard page sizes, and 512k and 8M are hugepages. When 4k standard pages are selected, 16k pages are not available. Allow 16k pages as hugepages when 4k pages are used. To allow that, implement arch_make_huge_pte() which receives the necessary arguments to allow setting the PTE in accordance with the page size: - 512 k pages must have _PAGE_HUGE and _PAGE_SPS. They are set by pte_mkhuge(). arch_make_huge_pte() does nothing. - 16 k pages must have only _PAGE_SPS. arch_make_huge_pte() clears _PAGE_HUGE. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/a518abc29266a708dfbccc8fce9ae6694fe4c2c6.1598862623.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/8xx: Refactor calculation of number of entries per PTE in page tablesChristophe Leroy2-8/+16
On 8xx, the number of entries occupied by a PTE in the page tables depends on the size of the page. At the time being, this calculation is done in two places: in pte_update() and in set_huge_pte_at() Refactor this calculation into a helper called number_of_cells_per_pte(). For the time being, the val param is unused. It will be used by following patch. Instead of opencoding is_hugepd(), use hugepd_ok() with a forward declaration. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/f6ea2483c2c389567b007945948f704d18cfaeea.1598862623.git.christophe.leroy@csgroup.eu
2020-09-15powerpc: Fix random segfault when freeing hugetlb rangeChristophe Leroy1-2/+16
The following random segfault is observed from time to time with map_hugetlb selftest: root@localhost:~# ./map_hugetlb 1 19 524288 kB hugepages Mapping 1 Mbytes Segmentation fault [ 31.219972] map_hugetlb[365]: segfault (11) at 117 nip 77974f8c lr 779a6834 code 1 in ld-2.23.so[77966000+21000] [ 31.220192] map_hugetlb[365]: code: 9421ffc0 480318d1 93410028 90010044 9361002c 93810030 93a10034 93c10038 [ 31.220307] map_hugetlb[365]: code: 93e1003c 93210024 8123007c 81430038 <80e90004> 814a0004 7f443a14 813a0004 [ 31.221911] BUG: Bad rss-counter state mm:(ptrval) type:MM_FILEPAGES val:33 [ 31.229362] BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:5 This fault is due to hugetlb_free_pgd_range() freeing page tables that are also used by regular pages. As explain in the comment at the beginning of hugetlb_free_pgd_range(), the verification done in free_pgd_range() on floor and ceiling is not done here, which means hugetlb_free_pte_range() can free outside the expected range. As the verification cannot be done in hugetlb_free_pgd_range(), it must be done in hugetlb_free_pte_range(). Fixes: b250c8c08c79 ("powerpc/8xx: Manage 512k huge pages as standard pages.") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/f0cb2a5477cd87d1eaadb128042e20aeb2bc2859.1598860677.git.christophe.leroy@csgroup.eu
2020-09-15powerpc/tau: Disable TAU between measurementsFinn Thain2-48/+26
Enabling CONFIG_TAU_INT causes random crashes: Unrecoverable exception 1700 at c0009414 (msr=1000) Oops: Unrecoverable exception, sig: 6 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5 NIP: c0009414 LR: c0009414 CTR: c00116fc REGS: c0799eb8 TRAP: 1700 Not tainted (5.7.0-pmac-00043-gd5f545e1a8593) MSR: 00001000 <ME> CR: 22000228 XER: 00000100 GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032 GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04 GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c LR [c0009414] arch_cpu_idle+0x24/0x6c Call Trace: [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6 ---[ end trace 3a0c9b5cb216db6b ]--- Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au
2020-09-15powerpc/tau: Check processor type before enabling TAU interruptFinn Thain2-22/+16
According to Freescale's documentation, MPC74XX processors have an erratum that prevents the TAU interrupt from working, so don't try to use it when running on those processors. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/c281611544768e758bd58fe812cf702a5bd2d042.1599260540.git.fthain@telegraphics.com.au
2020-09-15powerpc/tau: Remove duplicated set_thresholds() callFinn Thain1-5/+0
The commentary at the call site seems to disagree with the code. The conditional prevents calling set_thresholds() via the exception handler, which appears to crash. Perhaps that's because it immediately triggers another TAU exception. Anyway, calling set_thresholds() from TAUupdate() is redundant because tau_timeout() does so. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/d7c7ee33232cf72a6a6bbb6ef05838b2e2b113c0.1599260540.git.fthain@telegraphics.com.au
2020-09-15powerpc/tau: Convert from timer to workqueueFinn Thain1-20/+18
Since commit 19dbdcb8039cf ("smp: Warn on function calls from softirq context") the Thermal Assist Unit driver causes a warning like the following when CONFIG_SMP is enabled. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/smp.c:428 smp_call_function_many_cond+0xf4/0x38c Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac #3 NIP: c00b37a8 LR: c00b3abc CTR: c001218c REGS: c0799c60 TRAP: 0700 Not tainted (5.7.0-pmac) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000224 XER: 00000000 GPR00: c00b3abc c0799d18 c076e300 c079ef5c c0011fec 00000000 00000000 00000000 GPR08: 00000100 00000100 00008000 ffffffff 42000224 00000000 c079d040 c079d044 GPR16: 00000001 00000000 00000004 c0799da0 c079f054 c07a0000 c07a0000 00000000 GPR24: c0011fec 00000000 c079ef5c c079ef5c 00000000 00000000 00000000 00000000 NIP [c00b37a8] smp_call_function_many_cond+0xf4/0x38c LR [c00b3abc] on_each_cpu+0x38/0x68 Call Trace: [c0799d18] [ffffffff] 0xffffffff (unreliable) [c0799d68] [c00b3abc] on_each_cpu+0x38/0x68 [c0799d88] [c0096704] call_timer_fn.isra.26+0x20/0x7c [c0799d98] [c0096b40] run_timer_softirq+0x1d4/0x3fc [c0799df8] [c05b4368] __do_softirq+0x118/0x240 [c0799e58] [c0039c44] irq_exit+0xc4/0xcc [c0799e68] [c000ade8] timer_interrupt+0x1b0/0x230 [c0799ea8] [c0013520] ret_from_except+0x0/0x14 --- interrupt: 901 at arch_cpu_idle+0x24/0x6c LR = arch_cpu_idle+0x24/0x6c [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba8] cpu_startup_entry+0x24/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: 8129f204 2f890000 40beff98 3d20c07a 8929eec4 2f890000 40beff88 0fe00000 81220000 552805de 550802ef 4182ff84 <0fe00000> 3860ffff 7f65db78 7f44d378 ---[ end trace 34a886e47819c2eb ]--- Don't call on_each_cpu() from a timer callback, call it from a worker thread instead. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/bb61650bea4f4c91fb8e24b9a6f130a1438651a7.1599260540.git.fthain@telegraphics.com.au
2020-09-15powerpc/tau: Use appropriate temperature sample intervalFinn Thain2-9/+5
According to the MPC750 Users Manual, the SITV value in Thermal Management Register 3 is 13 bits long. The present code calculates the SITV value as 60 * 500 cycles. This would overflow to give 10 us on a 500 MHz CPU rather than the intended 60 us. (But according to the Microprocessor Datasheet, there is also a factor of 266 that has to be applied to this value on certain parts i.e. speed sort above 266 MHz.) Always use the maximum cycle count, as recommended by the Datasheet. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au
Powered by cgit, Gruvboxed by Blaster4385.