aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev/fsl_soc.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-08-10powerpc/cpm1: link to CONFIG_CPM1 instead of CONFIG_8xxChristophe Leroy1-1/+1
To remain consistent with what is done with CPM2, let's link CPM1 related parts to CONFIG_CPM1 instead of CONFIG_8xx When something depends on both CPM1 and CPM2 we associate it with CONFIG_CPM Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2016-11-23powerpc/fsl_soc: improve and simplify get_baudrateHeiner Kallweit1-8/+2
Use of_property_read_u32 instead of the generic of_get_property to simplify the code. In addition move the declaration of fs_baudrate into get_baudrate because it's private to this function. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Scott Wood <[email protected]>
2016-11-23powerpc/fsl_soc: improve and simplify get_brgfreqHeiner Kallweit1-17/+7
Use of_property_read_u32 instead of the generic of_get_property to simplify the code. In addition move the declaration of brgfreq into get_brgfreq because it's private to this function. Signed-off-by: Heiner Kallweit <[email protected]> [scottwood: minor whitespace fixes] Signed-off-by: Scott Wood <[email protected]>
2016-11-23powerpc/fsl_soc: improve and simplify fsl_get_sys_freqHeiner Kallweit1-10/+4
Use of_property_read_u32 instead of the generic of_get_property to simplify the code. In addition move the declaration of sysfreq into fsl_get_sys_freq because it's private to this function. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Scott Wood <[email protected]>
2016-09-25powerpc: Convert fsl_rstcr_restart to a reset handlerAndrey Smirnov1-13/+20
Convert fsl_rstcr_restart into a function to be registered with register_reset_handler(). Signed-off-by: Andrey Smirnov <[email protected]> [scottwood: Converted mvme7100 as well] Signed-off-by: Scott Wood <[email protected]>
2016-07-14powerpc: Make ppc_md.{halt, restart} __noreturnDaniel Axtens1-3/+5
powernv marks it's halt and restart calls as __noreturn. However, ppc_md does not have this annotation. Add the annotation to ppc_md, and then to every halt/restart function that is missing it. Additionally, I have verified that all of these functions do not return. Occasionally I have added a spin loop to be sure. Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2014-11-10powerpc/fsl: fsl_soc: delete unneeded test before of_node_putJulia Lawall1-2/+1
Of_node_put supports NULL as its argument, so the initial test is not necessary. Suggested by Uwe Kleine-König. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ -if (e) of_node_put(e); // </smpl> Signed-off-by: Julia Lawall <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2014-11-03powerpc: Convert power off logic to pm_power_offAlexander Graf1-1/+1
The generic Linux framework to power off the machine is a function pointer called pm_power_off. The trick about this pointer is that device drivers can potentially implement it rather than board files. Today on powerpc we set pm_power_off to invoke our generic full machine power off logic which then calls ppc_md.power_off to invoke machine specific power off. However, when we want to add a power off GPIO via the "gpio-poweroff" driver, this card house falls apart. That driver only registers itself if pm_power_off is NULL to ensure it doesn't override board specific logic. However, since we always set pm_power_off to the generic power off logic (which will just not power off the machine if no ppc_md.power_off call is implemented), we can't implement power off via the generic GPIO power off driver. To fix this up, let's get rid of the ppc_md.power_off logic and just always use pm_power_off as was intended. Then individual drivers such as the GPIO power off driver can implement power off logic via that function pointer. With this patch set applied and a few patches on top of QEMU that implement a power off GPIO on the virt e500 machine, I can successfully turn off my virtual machine after halt. Signed-off-by: Alexander Graf <[email protected]> [mpe: Squash into one patch and update changelog based on cover letter] Signed-off-by: Michael Ellerman <[email protected]>
2014-05-22powerpc/fsl: fsl_soc: remove 'fixed-link' parsing codeFlorian Fainelli1-32/+0
Parsing and registration of fixed PHY devices was needed with the use of of_phy_connect_fixed_link() because this function was using the designated PHY address identifier (first cell of the property) as the address to bind the PHY on the emulated bus. Since commit 3be2a49e5c08d268f8af0dd4fe89a24ea8cdc339 ("of: provide a binding for fixed link PHYs") a new pair of functions has been introduced which allows for dynamic address allocation of these fixed PHY devices, but also parses the old 'fixed-link' 5-digit property. Registration of fixed PHY early in platform code was needed because we could not issue a fixed MDIO bus re-scan within network drivers. The fixed PHYs had to be registered before the network drivers would call of_phy_connect_fixed_link(). All of these caveats are solved now, such that we can safely remove of_add_fixed_phys() now. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-12powerpc/fsl: fsl_soc: sparse fixesKim Phillips1-2/+2
arch/powerpc/sysdev/fsl_soc.c:70:67: warning: incorrect type in argument 2 (different base types) arch/powerpc/sysdev/fsl_soc.c:70:67: expected restricted __be32 const [usertype] *addr arch/powerpc/sysdev/fsl_soc.c:70:67: got unsigned int const [usertype] * Signed-off-by: Kim Phillips <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2012-10-05powerpc/fsl-soc: use CONFIG_EPAPR_PARAVIRT for hcallsScott Wood1-0/+2
Signed-off-by: Scott Wood <[email protected]> Signed-off-by: Stuart Yoder <[email protected]> Signed-off-by: Alexander Graf <[email protected]>
2012-03-28Disintegrate asm/system.h for PowerPCDavid Howells1-1/+0
Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> cc: [email protected]
2011-10-31powerpc: various straight conversions from module.h --> export.hPaul Gortmaker1-1/+1
All these files were including module.h just for the basic EXPORT_SYMBOL infrastructure. We can shift them off to the export.h header which is a way smaller footprint and thus realize some compile time gains. Signed-off-by: Paul Gortmaker <[email protected]>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: David Miller <[email protected]> Cc: Eric Dumazet <[email protected]> Acked-by: Mike Frysinger <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-06-27powerpc: add Freescale hypervisor partition control functionsTimur Tabi1-0/+27
Add functions to restart and halt the current partition when running under the Freescale hypervisor. These functions should be assigned to various function pointers of the ppc_md structure during the .probe() function for the board: ppc_md.restart = fsl_hv_restart; ppc_md.power_off = fsl_hv_halt; ppc_md.halt = fsl_hv_halt; Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds1-163/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits) USB: mct_u232: fix broken close USB: gadget: amd5536udc.c: fix error path USB: imx21-hcd - fix off by one resource size calculation usb: gadget: fix Kconfig warning usb: r8a66597-udc: Add processing when USB was removed. mxc_udc: add workaround for ENGcm09152 for i.MX35 USB: ftdi_sio: add device ids for ScienceScope USB: musb: AM35x: Workaround for fifo read issue USB: musb: add musb support for AM35x USB: AM35x: Add musb support usb: Fix linker errors with CONFIG_PM=n USB: ohci-sh - use resource_size instead of defining its own resource_len macro USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro USB: xhci: Fix compile error when CONFIG_PM=n USB: accept some invalid ep0-maxpacket values USB: xHCI: PCI power management implementation USB: xHCI: bus power management implementation USB: xHCI: port remote wakeup implementation USB: xHCI: port power management implementation ... Manually fix up (non-data) conflict: the SCSI merge gad renamed the 'hw_sector_size' member to 'physical_block_size', and the USB tree brought a new use of it.
2010-10-22USB: add platform glue driver for FSL USB DR controllerAnatolij Gustschin1-163/+0
Replace FSL USB platform code by simple platform driver for creation of FSL USB platform devices. The driver creates platform devices based on the information from USB nodes in the flat device tree. This is the replacement for old arch fsl_soc usb code removed by this patch. The driver uses usual of-style binding, available EHCI-HCD and UDC drivers can be bound to the created devices. The new of-style driver additionaly instantiates USB OTG platform device, as the appropriate USB OTG driver will be added soon. Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-10-14powerpc/fsl_soc: Search all global-utilities nodes for rstccrMatthew McClintock1-7/+13
The first global-utilities node might not contain the rstcr property, so we should search all the nodes Signed-off-by: Matthew McClintock <[email protected]> Acked-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2009-11-20powerpc/85xx: Kconfig cleanupKumar Gala1-1/+1
Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ based chips. Signed-off-by: Kumar Gala <[email protected]>
2009-08-24powerpc/85xx: issue fsl_soc reboot warning only when applicablePaul Gortmaker1-2/+4
Some CPU, like the MPC8560 don't have a RSTCR in the Global Utilities Block. These boards will implement their own reboot call, and not use this code, so we should only warn about the absence of the GUTS RSTCR when the default reboot code is used. Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2009-05-19powerpc/fsl: use of_iomap() for rstcr mappingKumar Gala1-10/+4
The rstcr register mapping code was written sometime ago before of_iomap() existed. We can use it and clean up the code a bit and get rid of one user of get_immrbase() in the process. Signed-off-by: Kumar Gala <[email protected]>
2009-05-08powerpc/fsl_soc: Remove mpc83xx_wdt_init, againAnton Vorontsov1-46/+0
commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver"), possibly due merge issues, reintroduced completely unneded mpc83xx_wdt_init call, which I removed some time ago in commit 20d38e01d48019c578ab0ec1464454c0 ("powerpc/fsl_soc: remove mpc83xx_wdt code"). Remove it once again. Signed-off-by: Anton Vorontsov <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2009-04-01powerpc/fsl_soc: isolate legacy fsl_spi support to mpc832x_rdb boardsAnton Vorontsov1-107/+0
The advantages of this: - Don't encourage legacy support; - Less external symbols, less code to compile-in for !MPC832x_RDB platforms. Signed-off-by: Anton Vorontsov <[email protected]> Cc: David Brownell <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-04-01spi_mpc83xx: rework chip selects handlingAnton Vorontsov1-8/+6
The main purpose of this patch is to pass 'struct spi_device' to the chip select handling routines. This is needed so that we could implement full-fledged OpenFirmware support for this driver. While at it, also: - Replace two {de,activate}_cs routines by single cs_contol(). - Don't duplicate platform data callbacks in mpc83xx_spi struct. Signed-off-by: Anton Vorontsov <[email protected]> Cc: David Brownell <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-03-09powerpc/83xx: Do not configure or probe disabled FSL DR USB controllersAnton Vorontsov1-0/+4
On MPC837X CPUs Dual-Role USB isn't always available (for example DR USB pins can be muxed away to eSDHC). U-Boot adds status = "disabled" property into the DR USB nodes to indicate that we must not try to configure or probe Dual-Role USB, otherwise we'll break eSDHC support on targets with MPC837X CPUs. Signed-off-by: Anton Vorontsov <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-12-16gianfar: Convert gianfar to an of_platform_driverAndy Fleming1-213/+28
Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2008-10-31gianfar: Fix race in TBI/SerDes configurationTrent Piepho1-0/+26
The init_phy() function attaches to the PHY, then configures the SerDes<->TBI link (in SGMII mode). The TBI is on the MDIO bus with the PHY (sort of) and is accessed via the gianfar's MDIO registers, using the functions gfar_local_mdio_read/write(), which don't do any locking. The previously attached PHY will start a work-queue on a timer, and probably an irq handler as well, which will talk to the PHY and thus use the MDIO bus. This uses phy_read/write(), which have locking, but not against the gfar_local_mdio versions. The result is that PHY code will try to use the MDIO bus at the same time as the SerDes setup code, corrupting the transfers. Setting up the SerDes before attaching to the PHY will insure that there is no race between the SerDes code and *our* PHY, but doesn't fix everything. Typically the PHYs for all gianfar devices are on the same MDIO bus, which is associated with the first gianfar device. This means that the first gianfar's SerDes code could corrupt the MDIO transfers for a different gianfar's PHY. The lock used by phy_read/write() is contained in the mii_bus structure, which is pointed to by the PHY. This is difficult to access from the gianfar drivers, as there is no link between a gianfar device and the mii_bus which shares the same MDIO registers. As far as the device layer and drivers are concerned they are two unrelated devices (which happen to share registers). Generally all gianfar devices' PHYs will be on the bus associated with the first gianfar. But this might not be the case, so simply locking the gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup code is going to use. We solve this by having the code that creates the gianfar platform device look in the device tree for an mdio device that shares the gianfar's registers. If one is found the ID of its platform device is saved in the gianfar's platform data. A new function in the gianfar mii code, gfar_get_miibus(), can use the bus ID to search through the platform devices for a gianfar_mdio device with the right ID. The platform device's driver data is the mii_bus structure, which the SerDes setup code can use to lock the current bus. Signed-off-by: Trent Piepho <[email protected]> CC: Andy Fleming <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2008-10-13powerpc: remove support for bootmem-allocated memory for the DIU driverTimur Tabi1-37/+1
Early versions of the Freescale DIU framebuffer driver depended on a bootmem allocation of memory for the video buffer. The need for this feature was removed in commit 6b51d51a, so now we can remove the platform-specific code that allocated that memory. Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-09-29powerpc/fsl_soc: remove mpc83xx_wdt codeAnton Vorontsov1-47/+0
mpc83xx_wdt is the OF driver now, so we don't need fsl_soc constructor. Signed-off-by: Anton Vorontsov <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-07-16gianfar: Add magic packet and suspend/resume support.Scott Wood1-0/+3
Signed-off-by: Scott Wood <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-07-16powerpc: Add support for multiple gfar mdio interfacesAndy Fleming1-46/+38
The old code assumed there was only one, but the 8572 actually has 3. Also, our usual id, 0xe0024520, gets resolved to -1 somewhere, and this was preventing the multiple buses from having different ids. So we only keep the low 20 bits, which have the interesting info, anyway. Signed-off-by: Andy Fleming <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-07-16powerpc/fsl_soc: gianfar: don't probe disabled devicesAnton Vorontsov1-0/+3
Freescale ships MPC8315E-RDB boards in two variants: 1. With TSEC1 ethernet support and USB UTMI PHY; 2. Without TSEC1 support, but with USB ULPI PHY in addition. For the second case U-Boot will add status = "disabled"; property into the TSEC1 node, so Linux should not try to probe it. Signed-off-by: Anton Vorontsov <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-07-12powerpc/i2c: Convert i2c-mpc into an of_platform driverJon Smirl1-133/+0
Convert i2c-mpc to an of_platform driver. Utilize the code in drivers/of-i2c.c to make i2c modules dynamically loadable by the device tree. Signed-off-by: Jon Smirl <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2008-06-09Merge branch 'merge'Paul Mackerras1-1/+1
Conflicts: arch/powerpc/sysdev/fsl_soc.c
2008-06-06rtc-ds1374: rename device to just "ds1374"Jean Delvare1-1/+1
Change the name of the device from "rtc-ds1374" to just "ds1374", to match what all other RTC drivers do. I seem to remember that this name was chosen to avoid possible confusion with an older ds1374 driver, but that driver was removed 3 months ago. Signed-off-by: Jean Delvare <[email protected]> Signed-off-by: Alessandro Zummo <[email protected]> Acked-by: Kumar Gala <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: David Brownell <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-06-02[POWERPC] fsl: Update fsl_soc to use cell-index property of I2C nodesTimur Tabi1-2/+8
Currently, fsl_i2c_of_init() uses the order of the I2C adapter nodes in the device tree to enumerate the I2C adapters. Instead, let's check for the cell-index property and use it if it exists. This is handy for device drivers that need to identify the I2C adapters by specific numbers. The Freescale MPC8610 ASoC V2 sound drivers are an example. Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-06-02[POWERPC] fsl: Add CS4270 i2c data to fsl_soc.cTimur Tabi1-0/+1
The i2c_devices[] array in fsl_soc.c lists all the I2C nodes that are supported on Freescale boards. Add an entry for the Cirrus Logic CS4270 so that a new-style CS4270 driver will work. Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-06-02[POWERPC] fsl: Add warning for unrecognized I2C nodes in the device treeTimur Tabi1-0/+4
Update of_find_i2c_driver in fsl_soc.c to display a warning message if an I2C node in the device tree isn't found in the i2c_devices[] array. Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Remove unsupported wakeup sources [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static [POWERPC] PS3: Add time include to lpm [POWERPC] Fix slb.c compile warnings [POWERPC] Xilinx: Fix compile warnings [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c [RAPIDIO] fix current kernel-doc notation [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot Fix a potential issue in mpc52xx uart driver [POWERPC] mpc5200: Allow for fixed speed MII configurations [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-01[POWERPC] Squash build warning for print of resource_size_t in fsl_soc.cBecky Bruce1-2/+2
When resource_size_t is larger than an int, the current code generates a build warning. Kill it. Signed-off-by: Becky Bruce <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-04-29i2c: Convert most new-style drivers to use module aliasingJean Delvare1-15/+12
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <[email protected]> Cc: Jon Smirl <[email protected]> Cc: Jochen Friedrich <[email protected]>
2008-04-28powerpc: Add DIU platform code for MPC8610HPCDYork Sun1-0/+41
Add platform code to support Freescale DIU. The platform code includes framebuffer memory allocation, pixel format, monitor port, etc. Signed-off-by: York Sun <[email protected]> Signed-off-by: Timur Tabi <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: "Antonino A. Daplas" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-04-21Merge branch 'master' of ↵Linus Torvalds1-579/+32
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits) [POWERPC] Fix compile breakage for 64-bit UP configs [POWERPC] Define copy_siginfo_from_user32 [POWERPC] Add compat handler for PTRACE_GETSIGINFO [POWERPC] i2c: Fix build breakage introduced by OF helpers [POWERPC] Optimize fls64() on 64-bit processors [POWERPC] irqtrace support for 64-bit powerpc [POWERPC] Stacktrace support for lockdep [POWERPC] Move stackframe definitions to common header [POWERPC] Fix device-tree locking vs. interrupts [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const [POWERPC] Remove unused __max_memory variable [POWERPC] Simplify xics direct/lpar irq_host setup [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ() [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade() [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c [POWERPC] Use asm-generic/bitops/find.h in bitops.h [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup [POWERPC] 85xx: Fix the size of qe muram for MPC8568E [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier. [POWERPC] 86xx: mark functions static, other minor cleanups ...
2008-04-17[POWERPC] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.Scott Wood1-38/+32
Signed-off-by: Scott Wood <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-04-17[POWERPC] CPM: Always use new binding.Scott Wood1-541/+0
The kconfig entry can go away once arch/ppc and references to the config in drivers are removed. Signed-off-by: Scott Wood <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-04-16phy: Change mii_bus id field to a stringAndy Fleming1-2/+3
Having the id field be an int was making more complex bus topologies excessively difficult. For now, just convert it to a string, and change all instances of "bus->id = val" to snprintf(id, MII_BUS_ID_LEN, "%x", val). Signed-off-by: Andy Fleming <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2008-02-05[POWERPC] FSL: fix mpc83xx_spi device registrationKim Phillips1-1/+1
calling platform_device_register after platform_device_alloc causes this: kobject (c3841a70): tried to init an initialized object, something is seriously wrong. Call Trace: [c381fe20] [c0007bb8] show_stack+0x3c/0x194 (unreliable) [c381fe50] [c01322a8] kobject_init+0xb8/0xbc [c381fe60] [c01591cc] device_initialize+0x30/0x9c [c381fe80] [c015ee34] platform_device_register+0x1c/0x34 [c381fea0] [c02f1fe0] of_fsl_spi_probe+0x21c/0x22c [c381ff30] [c02f2044] fsl_spi_init+0x54/0x160 [c381ff60] [c02f3924] __machine_initcall_mpc832x_rdb_mpc832x_spi_init+0x120/0x138 [c381ff70] [c02e61b4] kernel_init+0x98/0x284 [c381fff0] [c000f740] kernel_thread+0x44/0x60 fixed by calling platform_device_add (second half of platform_device_register) instead. Signed-off-by: Kim Phillips <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-01-28[POWERPC] fsl_spi: stop using device_type = "spi"Anton Vorontsov1-38/+60
Also: - rename "fsl_spi" to "fsl,spi"; - add and use cell-index property, if found; - split probing code out of fsl_spi_init, thus we can call it for legacy device_type probing and new "compatible" probing. Signed-off-by: Anton Vorontsov <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2008-01-28spi_mpc83xx: use brg-frequency for SPI in QEAnton Vorontsov1-13/+33
In case of QE we can use brg-frequency (which is qeclk/2). Thus no need to divide sysclk in the spi_mpc83xx. This patch also adds code to use get_brgfreq() on QE chips. Signed-off-by: Anton Vorontsov <[email protected]> Acked-by: David Brownell <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.