aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)AuthorFilesLines
2021-05-04Merge branch 'stable/for-linus-5.13' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Christoph Hellwig has taken a cleaver and trimmed off the not-needed code and nicely folded duplicate code in the generic framework. This lays the groundwork for more work to add extra DMA-backend-ish in the future. Along with that some bug-fixes to make this a nice working package" * 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: don't override user specified size in swiotlb_adjust_size swiotlb: Fix the type of index swiotlb: Make SWIOTLB_NO_FORCE perform no allocation ARM: Qualify enabling of swiotlb_init() swiotlb: remove swiotlb_nr_tbl swiotlb: dynamically allocate io_tlb_default_mem swiotlb: move global variables into a new io_tlb_mem structure xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup xen-swiotlb: split xen_swiotlb_init swiotlb: lift the double initialization protection from xen-swiotlb xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs xen-swiotlb: remove xen_set_nslabs xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer swiotlb: split swiotlb_tbl_sync_single swiotlb: move orig addr and size validation into swiotlb_bounce swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single powerpc/svm: stop using io_tlb_start
2021-05-04powerpc/powernv/memtrace: Fix dcache flushingSandipan Das1-2/+2
Trace memory is cleared and the corresponding dcache lines are flushed after allocation. However, this should not be done using the PFN. This adds the missing conversion to virtual address. Fixes: 2ac02e5ecec0 ("powerpc/mm: Remove dcache flush from memory remove.") Signed-off-by: Sandipan Das <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-05-02powerpc/powernv: remove the nvlink supportChristoph Hellwig7-937/+8
This code was only used by the vfio-nvlink2 code, which itself had no proper use. Drop this huge chunk of code build into every powernv or generic build. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-30Merge tag 'powerpc-5.13-1' of ↵Linus Torvalds28-54/+207
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Enable KFENCE for 32-bit. - Implement EBPF for 32-bit. - Convert 32-bit to do interrupt entry/exit in C. - Convert 64-bit BookE to do interrupt entry/exit in C. - Changes to our signal handling code to use user_access_begin/end() more extensively. - Add support for time namespaces (CONFIG_TIME_NS) - A series of fixes that allow us to reenable STRICT_KERNEL_RWX. - Other smaller features, fixes & cleanups. Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior, Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, and Zhang Yunkai. * tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits) powerpc/signal32: Fix erroneous SIGSEGV on RT signal return powerpc: Avoid clang uninitialized warning in __get_user_size_allowed powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n powerpc/kasan: Fix shadow start address with modules powerpc/kernel/iommu: Use largepool as a last resort when !largealloc powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants" powerpc/iommu: Annotate nested lock for lockdep powerpc/iommu: Do not immediately panic when failed IOMMU table allocation powerpc/iommu: Allocate it_map by vmalloc selftests/powerpc: remove unneeded semicolon powerpc/64s: remove unneeded semicolon powerpc/eeh: remove unneeded semicolon powerpc/selftests: Add selftest to test concurrent perf/ptrace events powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR powerpc/selftests/perf-hwbreak: Coalesce event creation code powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR powerpc/configs: Add IBMVNIC to some 64-bit configs selftests/powerpc: Add uaccess flush test ...
2021-04-27Merge branch 'work.coredump' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull coredump updates from Al Viro: "Just a couple of patches this cycle: use of seek + write instead of expanding truncate and minor header cleanup" * 'work.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: coredump.h: move CONFIG_COREDUMP-only stuff inside the ifdef coredump: don't bother with do_truncate()
2021-04-27Merge branch 'work.inode-type-fixes' of ↵Linus Torvalds1-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode type handling updates from Al Viro: "We should never change the type bits of ->i_mode or the method tables (->i_op and ->i_fop) of a live inode. Unfortunately, not all filesystems took care to prevent that" * 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: spufs: fix bogosity in S_ISGID handling 9p: missing chunk of "fs/9p: Don't update file type when updating file attributes" openpromfs: don't do unlock_new_inode() until the new inode is set up hostfs_mknod(): don't bother with init_special_inode() cifs: have cifs_fattr_to_inode() refuse to change type on live inode cifs: have ->mkdir() handle race with another client sanely do_cifs_create(): don't set ->i_mode of something we had not created gfs2: be careful with inode refresh ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap... vboxsf: don't allow to change the inode type afs: Fix updating of i_mode due to 3rd party change ceph: don't allow type or device number to change on non-I_NEW inodes ceph: fix up error handling with snapdirs new helper: inode_wrong_type()
2021-04-27powerpc/papr_scm: Mark nvdimm as unarmed if needed during probeVaibhav Jain1-0/+9
In case an nvdimm is found to be unarmed during probe then set its NDD_UNARMED flag before nvdimm_create(). This would enforce a read-only access to the ndimm region. Presently even if an nvdimm is unarmed its not marked as read-only on ppc64 guests. The patch updates papr_scm_nvdimm_init() to force query of nvdimm health via __drc_pmem_query_health() and if nvdimm is found to be unarmed then set the nvdimm flag ND_UNARMED for nvdimm_create(). Signed-off-by: Vaibhav Jain <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-23powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-23powerpc/iommu: Do not immediately panic when failed IOMMU table allocationAlexey Kardashevskiy4-12/+20
Most platforms allocate IOMMU table structures (specifically it_map) at the boot time and when this fails - it is a valid reason for panic(). However the powernv platform allocates it_map after a device is returned to the host OS after being passed through and this happens long after the host OS booted. It is quite possible to trigger the it_map allocation panic() and kill the host even though it is not necessary - the host OS can still use the DMA bypass mode (requires a tiny fraction of it_map's memory) and even if that fails, the host OS is runnnable as it was without the device for which allocating it_map causes the panic. Instead of immediately crashing in a powernv/ioda2 system, this prints an error and continues. All other platforms still call panic(). Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: David Gibson <[email protected]> Reviewed-by: Leonardo Bras <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-23powerpc/64s: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./arch/powerpc/platforms/powernv/setup.c:160:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-23powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')Christophe Leroy1-1/+1
AS arch/powerpc/platforms/52xx/lite5200_sleep.o arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages: arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression In the following code, 'addi' is wrong, has to be 'add' /* local udelay in sram is needed */ udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */ mullw r12, r12, r11 mftb r13 /* start */ addi r12, r13, r12 /* end */ Fixes: ee983079ce04 ("[POWERPC] MPC5200 low power mode") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/cb4cec9131c8577803367f1699209a7e104cec2a.1619025821.git.christophe.leroy@csgroup.eu
2021-04-22powerpc: make ALTIVEC select PPC_FPURandy Dunlap1-0/+1
On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled, there are build errors: drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration] enable_kernel_fp(); ../arch/powerpc/lib/sstep.c: In function 'do_vec_load': ../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration] 637 | put_vr(rn, &u.v); | ^~~~~~ ../arch/powerpc/lib/sstep.c: In function 'do_vec_store': ../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration] 660 | get_vr(rn, &u.v); | ^~~~~~ In theory ALTIVEC is independent of PPC_FPU but in practice nobody is going to build such a machine, so make ALTIVEC require PPC_FPU by selecting it. Reported-by: kernel test robot <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-21powerpc/pseries/iommu: Fix window size for direct mapping with pmemLeonardo Bras1-1/+1
As of today, if the DDW is big enough to fit (1 << MAX_PHYSMEM_BITS) it's possible to use direct DMA mapping even with pmem region. But, if that happens, the window size (len) is set to (MAX_PHYSMEM_BITS - page_shift) instead of MAX_PHYSMEM_BITS, causing a pagesize times smaller DDW to be created, being insufficient for correct usage. Fix this so the correct window size is used in this case. Fixes: bf6e2d562bbc4 ("powerpc/dma: Fallback to dma_ops when persistent memory present") Signed-off-by: Leonardo Bras <[email protected]> Reviewed-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-20powerpc/pseries: Stop calling printk in rtas_stop_self()Michael Ellerman1-3/+0
RCU complains about us calling printk() from an offline CPU: ============================= WARNING: suspicious RCU usage 5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted ----------------------------- kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1 Call Trace: dump_stack+0xec/0x144 (unreliable) lockdep_rcu_suspicious+0x124/0x144 __lock_acquire+0x1098/0x28b0 lock_acquire+0x128/0x600 _raw_spin_lock_irqsave+0x6c/0xc0 down_trylock+0x2c/0x70 __down_trylock_console_sem+0x60/0x140 vprintk_emit+0x1a8/0x4b0 vprintk_func+0xcc/0x200 printk+0x40/0x54 pseries_cpu_offline_self+0xc0/0x120 arch_cpu_idle_dead+0x54/0x70 do_idle+0x174/0x4a0 cpu_startup_entry+0x38/0x40 rest_init+0x268/0x388 start_kernel+0x748/0x790 start_here_common+0x1c/0x614 Which happens because by the time we get to rtas_stop_self() we are already offline. In addition the message can be spammy, and is not that helpful for users, so remove it. Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-20powerpc/pseries: Add shutdown() to vio_driver and vio_busTyrel Datwyler1-0/+16
Currently, neither the vio_bus or vio_driver structures provide support for a shutdown() routine. Add support for shutdown() by allowing drivers to provide a implementation via function pointer in their vio_driver struct and provide a proper implementation in the driver template for the vio_bus that calls a vio drivers shutdown() if defined. In the case that no shutdown() is defined by a vio driver and a kexec is in progress we implement a big hammer that calls remove() to ensure no further DMA for the devices is possible. Signed-off-by: Tyrel Datwyler <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-20powerpc/pseries: Set UNISOLATE on dlpar_cpu_remove() failureDaniel Henrique Barboza1-1/+9
The RTAS set-indicator call, when attempting to UNISOLATE a DRC that is already UNISOLATED or CONFIGURED, returns RTAS_OK and does nothing else for both QEMU and phyp. This gives us an opportunity to use this behavior to signal the hypervisor layer when an error during device removal happens, allowing it to do a proper error handling, while not breaking QEMU/phyp implementations that don't have this support. This patch introduces this idea by unisolating all CPU DRCs that failed to be removed by dlpar_cpu_remove_by_index(), when handling the PSERIES_HP_ELOG_ID_DRC_INDEX event. This is being done for this event only because its the only CPU removal event QEMU uses, and there's no need at this moment to add this mechanism for phyp only code. Signed-off-by: Daniel Henrique Barboza <[email protected]> Reviewed-by: David Gibson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-20powerpc/pseries: Introduce dlpar_unisolate_drc()Daniel Henrique Barboza2-0/+15
Next patch will execute a set-indicator call in hotplug-cpu.c. Create a dlpar_unisolate_drc() helper to avoid spreading more rtas_set_indicator() calls outside of dlpar.c. Signed-off-by: Daniel Henrique Barboza <[email protected]> Reviewed-by: David Gibson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-20powerpc/pseries/mce: Fix a typo in error type assignmentGanesh Goudar1-1/+1
The error type is ICACHE not DCACHE, for case MCE_ERROR_TYPE_ICACHE. Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-16powerpc/pseries: extract host bridge from pci_bus prior to bus removalTyrel Datwyler1-1/+3
The pci_bus->bridge reference may no longer be valid after pci_bus_remove() resulting in passing a bad value to device_unregister() for the associated bridge device. Store the host_bridge reference in a separate variable prior to pci_bus_remove(). Fixes: 7340056567e3 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal") Signed-off-by: Tyrel Datwyler <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-16powerpc/papr_scm: Fix build error due to wrong printf specifierMichael Ellerman1-1/+1
When I changed the rc variable to be long rather than int64_t I neglected to update the printk(), leading to a build break: arch/powerpc/platforms/pseries/papr_scm.c: In function 'papr_scm_pmem_flush': arch/powerpc/platforms/pseries/papr_scm.c:144:26: warning: format '%lld' expects argument of type 'long long int', but argument 3 has type 'long int' [-Wformat=] Fixes: 75b7c05ebf90 ("powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-14powerpc/fadump: make symbol 'rtas_fadump_set_regval' staticPu Lehui1-1/+1
Fix sparse warnings: arch/powerpc/platforms/pseries/rtas-fadump.c:250:6: warning: symbol 'rtas_fadump_set_regval' was not declared. Should it be static? Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-14powerpc/powernv: make symbol 'mpipl_kobj' staticBixuan Cui1-1/+1
The sparse tool complains as follows: arch/powerpc/platforms/powernv/opal-core.c:74:16: warning: symbol 'mpipl_kobj' was not declared. This symbol is not used outside of opal-core.c, so marks it static. Reported-by: Hulk Robot <[email protected]> Signed-off-by: Bixuan Cui <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-14powerpc/pseries/pmem: Make symbol 'drc_pmem_match' staticBixuan Cui1-1/+1
The sparse tool complains as follows: arch/powerpc/platforms/pseries/pmem.c:142:27: warning: symbol 'drc_pmem_match' was not declared. Should it be static? This symbol is not used outside of pmem.c, so this commit marks it static. Reported-by: Hulk Robot <[email protected]> Signed-off-by: Bixuan Cui <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-14powerpc/pseries: Make symbol '__pcpu_scope_hcall_stats' staticBixuan Cui1-1/+1
The sparse tool complains as follows: arch/powerpc/platforms/pseries/hvCall_inst.c:29:1: warning: symbol '__pcpu_scope_hcall_stats' was not declared. Should it be static? This symbol is not used outside of hvCall_inst.c, so this commit marks it static. Reported-by: Hulk Robot <[email protected]> Signed-off-by: Bixuan Cui <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-14powerpc/iommu: Enable remaining IOMMU Pagesizes present in LoPARLeonardo Bras1-7/+30
According to LoPAR, ibm,query-pe-dma-window output named "IO Page Sizes" will let the OS know all possible pagesizes that can be used for creating a new DDW. Currently Linux will only try using 3 of the 8 available options: 4K, 64K and 16M. According to LoPAR, Hypervisor may also offer 32M, 64M, 128M, 256M and 16G. Enabling bigger pages would be interesting for direct mapping systems with a lot of RAM, while using less TCE entries. Signed-off-by: Leonardo Bras <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-14powerpc/syscalls: switch to generic syscalltbl.shMasahiro Yamada1-1/+1
Many architectures duplicate similar shell scripts. This commit converts powerpc to use scripts/syscalltbl.sh. This also unifies syscall_table_32.h and syscall_table_c32.h. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-14powerpc/papr_scm: Implement support for H_SCM_FLUSH hcallShivaprasad G Bhat1-0/+39
Add support for ND_REGION_ASYNC capability if the device tree indicates 'ibm,hcall-flush-required' property in the NVDIMM node. Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor. If the flush request failed, the hypervisor is expected to to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call. This patch prevents mmap of namespaces with MAP_SYNC flag if the nvdimm requires an explicit flush[1]. References: [1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c Signed-off-by: Shivaprasad G Bhat <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> [mpe: Use unsigned long / long instead of uint64_t/int64_t] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
2021-04-08powerpc/pseries: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-08powerpc/powernv/memtrace: Allow mmaping trace buffersJordan Niethe1-1/+17
Let the memory removed from the linear mapping to be used for the trace buffers be mmaped. This is a useful way of providing cache-inhibited memory for the alignment_handler selftest. Signed-off-by: Jordan Niethe <[email protected]> [mpe: make memtrace_mmap() static as noticed by [email protected]] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-08powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp()Michael Ellerman1-1/+3
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes the key in bits 9-13, but currently we always set those bits to zero. In the past that hasn't been a problem because we always used key 0 for the kernel, and updateboltedpp() is only used for kernel mappings. However since commit d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation") we are now inadvertently changing the key (to zero) when we call plpar_pte_protect(). That hasn't broken anything because updateboltedpp() is only used for STRICT_KERNEL_RWX, which is currently disabled on 64s due to other bugs. But we want to fix that, so first we need to pass the key correctly to plpar_pte_protect(). We can't pass our newpp value directly in, we have to convert it into the form expected by the hcall. The hcall we're using here is H_PROTECT, which is specified in section 14.5.4.1.6 of LoPAPR v1.1. It takes a `flags` parameter, and the description for flags says: * flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO option: CMO Option flags as defined in Table 189‚ If you then go to the start of the parent section, 14.5.4.1, on page 405, it says: Register Linkage (For hcall() tokens 0x04 - 0x18) * On Call * R3 function call token * R4 flags (see Table 178‚ “Page Frame Table Access flags field definition‚” on page 401) Then you have to go to section 14.5.3, and on page 394 there is a list of hcalls and their tokens (table 176), and there you can see that H_PROTECT == 0x18. Finally you can look at table 178, on page 401, where it specifies the layout of the bits for the key: Bit Function ----------------- 50-54 | key0-key4 Those are big-endian bit numbers, converting to normal bit numbers you get bits 9-13, or 0x3e00. In the kernel we have: #define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000) #define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00) So the LO bits of newpp are already in the right place, and the HI bits need to be shifted down by 48. Fixes: d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation") Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-31powerpc/pseries: Only register vio drivers if vio bus existsMichael Ellerman1-0/+4
The vio bus is a fake bus, which we use on pseries LPARs (guests) to discover devices provided by the hypervisor. There's no need or sense in creating the vio bus on bare metal systems. Which is why commit 4336b9337824 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific") made the initialisation of the vio bus only happen in LPARs. However as a result of that commit we now see errors at boot on bare metal systems: Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized. Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized. This happens because those drivers are built-in, and are calling vio_register_driver(). It in turn calls driver_register() with a reference to vio_bus_type, but we haven't registered vio_bus_type with the driver core. Fix it by also guarding vio_register_driver() with a check to see if we are on pseries. Fixes: 4336b9337824 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific") Reported-by: Paul Menzel <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Tested-by: Paul Menzel <[email protected]> Reviewed-by: Tyrel Datwyler <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-29powerpc/powernv: Remove unneeded variable: "rc"dingsenjie1-4/+1
Remove unneeded variable: "rc". Signed-off-by: dingsenjie <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-29powerpc/pseries/hotplug-cpu: Show 'last online CPU' error in dlpar_cpu_offline()Daniel Henrique Barboza1-0/+14
One of the reasons that dlpar_cpu_offline can fail is when attempting to offline the last online CPU of the kernel. This can be observed in a pseries QEMU guest that has hotplugged CPUs. If the user offlines all other CPUs of the guest, and a hotplugged CPU is now the last online CPU, trying to reclaim it will fail. The current error message in this situation returns rc with -EBUSY and a generic explanation, e.g.: pseries-hotplug-cpu: Failed to offline CPU PowerPC,POWER9, rc: -16 EBUSY can be caused by other conditions, such as cpu_hotplug_disable being true. Throwing a more specific error message for this case, instead of just "Failed to offline CPU", makes it clearer that the error is in fact a known error situation instead of other generic/unknown cause. This patch adds a 'last online' check in dlpar_cpu_offline() to catch the 'last online CPU' offline error, eturning a more informative error message: pseries-hotplug-cpu: Unable to remove last online CPU PowerPC,POWER9 Signed-off-by: Daniel Henrique Barboza <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-29powerpc/embedded6xx: Remove CONFIG_MV64X60Christophe Leroy1-5/+0
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") moved the last selector of CONFIG_MV64X60. As it is not a user selectable config, it can be removed. Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Wolfram Sang <[email protected]> # for I2C Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/19e57d16692dcd1ca67ba880d7273a57fab416aa.1616085654.git.christophe.leroy@csgroup.eu
2021-03-29powerpc/book3s64/kuap: Move Kconfig varriables to BOOK3S_64Aneesh Kumar K.V1-2/+2
With below two commits: commit c91435d95c49 ("powerpc/book3s64/hash/kuep: Enable KUEP on hash") commit b2ff33a10c8b ("powerpc/book3s64/hash/kuap: Enable kuap on hash") the kernel now supports kuap/kuep with hash translation. Hence select the Kconfig even when radix is disabled. Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-29powerpc/pci: fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Fix the following coccicheck warning: ./arch/powerpc/platforms/maple/pci.c:37:16-17: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/1615793724-97015-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-03-26powerpc/pseries: export LPAR security flavor in lparcfgLaurent Dufour3-0/+10
This is helpful to read the security flavor from inside the LPAR. In /sys/kernel/debug/powerpc/security_features it can be seen if mitigations are on or off but not the level set through the ASMI menu. Furthermore, reporting it through /proc/powerpc/lparcfg allows an easy processing by the lparstat command [1]. Export it like this in /proc/powerpc/lparcfg: $ grep security_flavor /proc/powerpc/lparcfg security_flavor=1 Value follows what is documented on the IBM support page [2]: 0 Speculative execution fully enabled 1 Speculative execution controls to mitigate user-to-kernel attacks 2 Speculative execution controls to mitigate user-to-kernel and user-to-user side-channel attacks [1] https://groups.google.com/g/powerpc-utils-devel/c/NaKXvdyl_UI/m/wa2stpIDAQAJ [2] https://www.ibm.com/support/pages/node/715841 Signed-off-by: Laurent Dufour <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-26powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECTAneesh Kumar K.V1-1/+2
H_PROTECT expects the flag value to include flags: AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags This patch updates hpte_updatepp() to fetch the storage key value from the linux page table and use the same in H_PROTECT hcall. native_hpte_updatepp() is not updated because the kernel doesn't clear the existing storage key value there. The kernel also doesn't use hpte_updatepp() callback for updating storage keys. This fixes the below kernel crash observed with KUAP enabled. BUG: Unable to handle kernel data access on write at 0xc009fffffc440000 Faulting instruction address: 0xc0000000000b7030 Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100 Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ... CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0 ... NIP memset+0x68/0x104 LR pcpu_alloc+0x54c/0xb50 Call Trace: pcpu_alloc+0x55c/0xb50 (unreliable) blk_stat_alloc_callback+0x94/0x150 blk_mq_init_allocated_queue+0x64/0x560 blk_mq_init_queue+0x54/0xb0 scsi_mq_alloc_queue+0x30/0xa0 scsi_alloc_sdev+0x1cc/0x300 scsi_probe_and_add_lun+0xb50/0x1020 __scsi_scan_target+0x17c/0x790 scsi_scan_channel+0x90/0xe0 scsi_scan_host_selected+0x148/0x1f0 do_scan_async+0x2c/0x2a0 async_run_entry_fn+0x78/0x220 process_one_work+0x264/0x540 worker_thread+0xa8/0x600 kthread+0x190/0x1a0 ret_from_kernel_thread+0x5c/0x6c With KUAP enabled the kernel uses storage key 3 for all its translations. But as shown by the debug print, in this specific case we have the hash page table entry created with key value 0. Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194 and DSISR indicates a key fault. This can happen due to parallel fault on the same EA by different CPUs: CPU 0 CPU 1 fault on X H_PAGE_BUSY set fault on X finish fault handling and clear H_PAGE_BUSY check for H_PAGE_BUSY continue with fault handling. This implies CPU1 will end up calling hpte_updatepp for address X and the kernel updated the hash pte entry with key 0 Fixes: d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation") Reported-by: Murilo Opsfelder Araujo <[email protected]> Signed-off-by: Aneesh Kumar K.V <[email protected]> Debugged-by: Michael Ellerman <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-24powerpc/pseries: Move hvc_vio_init_early() prototype to shared locationLee Jones2-3/+1
Fixes the following W=1 kernel build warning(s): drivers/tty/hvc/hvc_vio.c:385:13: warning: no previous prototype for ‘hvc_vio_init_early’ 385 | void __init hvc_vio_init_early(void) | ^~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-24powerpc/chrp: Make hydra_init() staticGeert Uytterhoeven1-2/+1
Commit 407d418f2fd4c20a ("powerpc/chrp: Move PHB discovery") moved the sole call to hydra_init() to the source file where it is defined, so it can be made static. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-23powerpc/pseries/mobility: handle premature return from H_JOINNathan Lynch1-1/+25
The pseries join/suspend sequence in its current form was written with the assumption that it was the only user of H_PROD and that it needn't handle spurious successful returns from H_JOIN. That's wrong; powerpc's paravirt spinlock code uses H_PROD, and CPUs entering do_join() can be woken prematurely from H_JOIN with a status of H_SUCCESS as a result. This causes all CPUs to exit the sequence early, preventing suspend from occurring at all. Add a 'done' boolean flag to the pseries_suspend_info struct, and have the waking thread set it before waking the other threads. Threads which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still unset. Fixes: 9327dc0aeef3 ("powerpc/pseries/mobility: use stop_machine for join/suspend") Signed-off-by: Nathan Lynch <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-23powerpc/pseries/mobility: use struct for shared stateNathan Lynch1-3/+19
The atomic_t counter is the only shared state for the join/suspend sequence so far, but that will change. Contain it in a struct (pseries_suspend_info), and document its intended use. No functional change. Signed-off-by: Nathan Lynch <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-17powerpc/svm: stop using io_tlb_startChristoph Hellwig1-3/+3
Use the local variable that is passed to swiotlb_init_with_tbl for freeing the memory in the failure case to isolate the code a little better from swiotlb internals. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2021-03-12spufs: fix bogosity in S_ISGID handlingAl Viro1-8/+2
clearing everything *except* S_ISGID (including the S_IFDIR, among other things) is wrong. Just use init_inode_owner() and be done with that... Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Al Viro <[email protected]>
2021-03-08coredump: don't bother with do_truncate()Al Viro1-2/+1
have dump_skip() just remember how much needs to be skipped, leave actual seeks/writing zeroes to the next dump_emit() or the end of coredump output, whichever comes first. And instead of playing with do_truncate() in the end, just write one NUL at the end of the last gap (if any). Signed-off-by: Al Viro <[email protected]>
2021-03-02vio: make remove callback return voidUwe Kleine-König1-4/+3
The driver core ignores the return value of struct bus_type::remove() because there is only little that can be done. To simplify the quest to make this function return void, let struct vio_driver::remove() return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea. Note there are two nominally different implementations for a vio bus: one in arch/sparc/kernel/vio.c and the other in arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc one. Before this patch for a device that was bound to a driver without a remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device core still considers the device unbound after vio_bus_remove() returns calling this unconditionally is the consistent behaviour which is implemented here. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Tyrel Datwyler <[email protected]> Acked-by: Lijun Pan <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> [mpe: Drop unneeded hvcs_remove() forward declaration, squash in change from sfr to drop ibmvnic_remove() forward declaration] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-01powerpc/pseries: Don't enforce MSI affinity with kdumpGreg Kurz1-2/+23
Depending on the number of online CPUs in the original kernel, it is likely for CPU #0 to be offline in a kdump kernel. The associated IRQs in the affinity mappings provided by irq_create_affinity_masks() are thus not started by irq_startup(), as per-design with managed IRQs. This can be a problem with multi-queue block devices driven by blk-mq : such a non-started IRQ is very likely paired with the single queue enforced by blk-mq during kdump (see blk_mq_alloc_tag_set()). This causes the device to remain silent and likely hangs the guest at some point. This is a regression caused by commit 9ea69a55b3b9 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()"). Note that this only happens with the XIVE interrupt controller because XICS has a workaround to bypass affinity, which is activated during kdump with the "noirqdistrib" kernel parameter. The issue comes from a combination of factors: - discrepancy between the number of queues detected by the multi-queue block driver, that was used to create the MSI vectors, and the single queue mode enforced later on by blk-mq because of kdump (i.e. keeping all queues fixes the issue) - CPU#0 offline (i.e. kdump always succeed with CPU#0) Given that I couldn't reproduce on x86, which seems to always have CPU#0 online even during kdump, I'm not sure where this should be fixed. Hence going for another approach : fine-grained affinity is for performance and we don't really care about that during kdump. Simply revert to the previous working behavior of ignoring affinity masks in this case only. Fixes: 9ea69a55b3b9 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()") Cc: [email protected] # v5.10+ Signed-off-by: Greg Kurz <[email protected]> Reviewed-by: Laurent Vivier <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-02-23Merge tag 'idmapped-mounts-v5.12' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull idmapped mounts from Christian Brauner: "This introduces idmapped mounts which has been in the making for some time. Simply put, different mounts can expose the same file or directory with different ownership. This initial implementation comes with ports for fat, ext4 and with Christoph's port for xfs with more filesystems being actively worked on by independent people and maintainers. Idmapping mounts handle a wide range of long standing use-cases. Here are just a few: - Idmapped mounts make it possible to easily share files between multiple users or multiple machines especially in complex scenarios. For example, idmapped mounts will be used in the implementation of portable home directories in systemd-homed.service(8) where they allow users to move their home directory to an external storage device and use it on multiple computers where they are assigned different uids and gids. This effectively makes it possible to assign random uids and gids at login time. - It is possible to share files from the host with unprivileged containers without having to change ownership permanently through chown(2). - It is possible to idmap a container's rootfs and without having to mangle every file. For example, Chromebooks use it to share the user's Download folder with their unprivileged containers in their Linux subsystem. - It is possible to share files between containers with non-overlapping idmappings. - Filesystem that lack a proper concept of ownership such as fat can use idmapped mounts to implement discretionary access (DAC) permission checking. - They allow users to efficiently changing ownership on a per-mount basis without having to (recursively) chown(2) all files. In contrast to chown (2) changing ownership of large sets of files is instantenous with idmapped mounts. This is especially useful when ownership of a whole root filesystem of a virtual machine or container is changed. With idmapped mounts a single syscall mount_setattr syscall will be sufficient to change the ownership of all files. - Idmapped mounts always take the current ownership into account as idmappings specify what a given uid or gid is supposed to be mapped to. This contrasts with the chown(2) syscall which cannot by itself take the current ownership of the files it changes into account. It simply changes the ownership to the specified uid and gid. This is especially problematic when recursively chown(2)ing a large set of files which is commong with the aforementioned portable home directory and container and vm scenario. - Idmapped mounts allow to change ownership locally, restricting it to specific mounts, and temporarily as the ownership changes only apply as long as the mount exists. Several userspace projects have either already put up patches and pull-requests for this feature or will do so should you decide to pull this: - systemd: In a wide variety of scenarios but especially right away in their implementation of portable home directories. https://systemd.io/HOME_DIRECTORY/ - container runtimes: containerd, runC, LXD:To share data between host and unprivileged containers, unprivileged and privileged containers, etc. The pull request for idmapped mounts support in containerd, the default Kubernetes runtime is already up for quite a while now: https://github.com/containerd/containerd/pull/4734 - The virtio-fs developers and several users have expressed interest in using this feature with virtual machines once virtio-fs is ported. - ChromeOS: Sharing host-directories with unprivileged containers. I've tightly synced with all those projects and all of those listed here have also expressed their need/desire for this feature on the mailing list. For more info on how people use this there's a bunch of talks about this too. Here's just two recent ones: https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf https://fosdem.org/2021/schedule/event/containers_idmap/ This comes with an extensive xfstests suite covering both ext4 and xfs: https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts It covers truncation, creation, opening, xattrs, vfscaps, setid execution, setgid inheritance and more both with idmapped and non-idmapped mounts. It already helped to discover an unrelated xfs setgid inheritance bug which has since been fixed in mainline. It will be sent for inclusion with the xfstests project should you decide to merge this. In order to support per-mount idmappings vfsmounts are marked with user namespaces. The idmapping of the user namespace will be used to map the ids of vfs objects when they are accessed through that mount. By default all vfsmounts are marked with the initial user namespace. The initial user namespace is used to indicate that a mount is not idmapped. All operations behave as before and this is verified in the testsuite. Based on prior discussions we want to attach the whole user namespace and not just a dedicated idmapping struct. This allows us to reuse all the helpers that already exist for dealing with idmappings instead of introducing a whole new range of helpers. In addition, if we decide in the future that we are confident enough to enable unprivileged users to setup idmapped mounts the permission checking can take into account whether the caller is privileged in the user namespace the mount is currently marked with. The user namespace the mount will be marked with can be specified by passing a file descriptor refering to the user namespace as an argument to the new mount_setattr() syscall together with the new MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern of extensibility. The following conditions must be met in order to create an idmapped mount: - The caller must currently have the CAP_SYS_ADMIN capability in the user namespace the underlying filesystem has been mounted in. - The underlying filesystem must support idmapped mounts. - The mount must not already be idmapped. This also implies that the idmapping of a mount cannot be altered once it has been idmapped. - The mount must be a detached/anonymous mount, i.e. it must have been created by calling open_tree() with the OPEN_TREE_CLONE flag and it must not already have been visible in the filesystem. The last two points guarantee easier semantics for userspace and the kernel and make the implementation significantly simpler. By default vfsmounts are marked with the initial user namespace and no behavioral or performance changes are observed. The manpage with a detailed description can be found here: https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8 In order to support idmapped mounts, filesystems need to be changed and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The patches to convert individual filesystem are not very large or complicated overall as can be seen from the included fat, ext4, and xfs ports. Patches for other filesystems are actively worked on and will be sent out separately. The xfstestsuite can be used to verify that port has been done correctly. The mount_setattr() syscall is motivated independent of the idmapped mounts patches and it's been around since July 2019. One of the most valuable features of the new mount api is the ability to perform mounts based on file descriptors only. Together with the lookup restrictions available in the openat2() RESOLVE_* flag namespace which we added in v5.6 this is the first time we are close to hardened and race-free (e.g. symlinks) mounting and path resolution. While userspace has started porting to the new mount api to mount proper filesystems and create new bind-mounts it is currently not possible to change mount options of an already existing bind mount in the new mount api since the mount_setattr() syscall is missing. With the addition of the mount_setattr() syscall we remove this last restriction and userspace can now fully port to the new mount api, covering every use-case the old mount api could. We also add the crucial ability to recursively change mount options for a whole mount tree, both removing and adding mount options at the same time. This syscall has been requested multiple times by various people and projects. There is a simple tool available at https://github.com/brauner/mount-idmapped that allows to create idmapped mounts so people can play with this patch series. I'll add support for the regular mount binary should you decide to pull this in the following weeks: Here's an example to a simple idmapped mount of another user's home directory: u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt u1001@f2-vm:/$ ls -al /home/ubuntu/ total 28 drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 . drwxr-xr-x 4 root root 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ ls -al /mnt/ total 28 drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 . drwxr-xr-x 29 root root 4096 Oct 28 22:01 .. -rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile -rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ touch /mnt/my-file u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file u1001@f2-vm:/$ ls -al /mnt/my-file -rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file u1001@f2-vm:/$ ls -al /home/ubuntu/my-file -rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file u1001@f2-vm:/$ getfacl /mnt/my-file getfacl: Removing leading '/' from absolute path names # file: mnt/my-file # owner: u1001 # group: u1001 user::rw- user:u1001:rwx group::rw- mask::rwx other::r-- u1001@f2-vm:/$ getfacl /home/ubuntu/my-file getfacl: Removing leading '/' from absolute path names # file: home/ubuntu/my-file # owner: ubuntu # group: ubuntu user::rw- user:ubuntu:rwx group::rw- mask::rwx other::r--" * tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits) xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl xfs: support idmapped mounts ext4: support idmapped mounts fat: handle idmapped mounts tests: add mount_setattr() selftests fs: introduce MOUNT_ATTR_IDMAP fs: add mount_setattr() fs: add attr_flags_to_mnt_flags helper fs: split out functions to hold writers namespace: only take read lock in do_reconfigure_mnt() mount: make {lock,unlock}_mount_hash() static namespace: take lock_mount_hash() directly when changing flags nfs: do not export idmapped mounts overlayfs: do not mount on top of idmapped mounts ecryptfs: do not mount on top of idmapped mounts ima: handle idmapped mounts apparmor: handle idmapped mounts fs: make helpers idmap mount aware exec: handle idmapped mounts would_dump: handle idmapped mounts ...
2021-02-23Merge tag 'modules-for-v5.12' of ↵Linus Torvalds1-22/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export types were introduced between 2006 - 2008. All the of the unused symbols have been long removed and gpl future symbols were converted to gpl quite a long time ago, and I don't believe these export types have been used ever since. So, I think it should be safe to retire those export types now (Christoph Hellwig) - Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig) - Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as it is the only caller (Christoph Hellwig) - Unexport find_module() and module_mutex and fix the last module callers to not rely on these anymore. Make module_mutex internal to the module loader (Christoph Hellwig) - Harden ELF checks on module load and validate ELF structures before checking the module signature (Frank van der Linden) - Fix undefined symbol warning for clang (Fangrui Song) - Fix smatch warning (Dan Carpenter) * tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: potential uninitialized return in module_kallsyms_on_each_symbol() module: remove EXPORT_UNUSED_SYMBOL* module: remove EXPORT_SYMBOL_GPL_FUTURE module: move struct symsearch to module.c module: pass struct find_symbol_args to find_symbol module: merge each_symbol_section into find_symbol module: remove each_symbol_in_section module: mark module_mutex static kallsyms: only build {,module_}kallsyms_on_each_symbol when required kallsyms: refactor {,module_}kallsyms_on_each_symbol module: use RCU to synchronize find_module module: unexport find_module and module_mutex drm: remove drm_fb_helper_modinit powerpc/powernv: remove get_cxl_module module: harden ELF info handling module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
2021-02-22Merge tag 'powerpc-5.12-1' of ↵Linus Torvalds58-158/+207
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A large series adding wrappers for our interrupt handlers, so that irq/nmi/user tracking can be isolated in the wrappers rather than spread in each handler. - Conversion of the 32-bit syscall handling into C. - A series from Nick to streamline our TLB flushing when using the Radix MMU. - Switch to using queued spinlocks by default for 64-bit server CPUs. - A rework of our PCI probing so that it happens later in boot, when more generic infrastructure is available. - Two small fixes to allow 32-bit little-endian processes to run on 64-bit kernels. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun. * tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits) powerpc/perf: Adds support for programming of Thresholding in P10 powerpc/pci: Remove unimplemented prototypes powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user() powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size() powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user() powerpc/64: Fix stack trace not displaying final frame powerpc/time: Remove get_tbl() powerpc/time: Avoid using get_tbl() spi: mpc52xx: Avoid using get_tbl() powerpc/syscall: Avoid storing 'current' in another pointer powerpc/32: Handle bookE debugging in C in syscall entry/exit powerpc/syscall: Do not check unsupported scv vector on PPC32 powerpc/32: Remove the counter in global_dbcr0 powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry powerpc/syscall: implement system call entry/exit logic in C for PPC32 powerpc/32: Always save non volatile GPRs at syscall entry powerpc/syscall: Change condition to check MSR_RI powerpc/syscall: Save r3 in regs->orig_r3 powerpc/syscall: Use is_compat_task() powerpc/syscall: Make interrupt.c buildable on PPC32 ...
Powered by cgit, Gruvboxed by Blaster4385.