| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Split up the logic so that we have one branch that handles setting up a
segmented window and another that handles setting up single PE windows for
each VF.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
I want to refactor the loop this code is currently inside of. Hoist it on
out.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove the IODA2 PHB checks. We already assume IODA2 in several places so
there's not much point in wrapping most of the setup and teardown process
in an if block.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently the iov->pe_num_map[] does one of two things depending on
whether single PE mode is being used or not. When it is, this contains an
array which maps a vf_index to the corresponding PE number. When single PE
mode is not being used this contains a scalar which is the base PE for the
set of enabled VFs (for for VFn is base + n).
The array was necessary because when calling pnv_ioda_alloc_pe() there is
no guarantee that the allocated PEs would be contigious. We can now
allocate contigious blocks of PEs so this is no longer an issue. This
allows us to drop the if (single_mode) {} .. else {} block scattered
through the SR-IOV code which is a nice clean up.
This also fixes a bug in pnv_pci_sriov_disable() which is the non-atomic
bitmap_clear() to manipulate the PE allocation map. Other users of the map
assume it will be accessed with atomic ops.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Rework the PE allocation logic to allow allocating blocks of PEs rather
than individually. We'll use this to allocate contigious blocks of PEs for
the SR-IOVs.
This patch also adds code to pnv_ioda_alloc_pe() and pnv_ioda_reserve_pe() to
use the existing, but unused, phb->pe_alloc_mutex. Currently these functions
use atomic bit ops to release a currently allocated PE number. However,
the pnv_ioda_alloc_pe() wants to have exclusive access to the bit map while
scanning for hole large enough to accomodate the allocation size.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The sequence required to use the single PE BAR mode is kinda janky and
requires a little explanation. The API was designed with P7-IOC style
windows where the setup process is something like:
1. Configure the window start / end address
2. Enable the window
3. Map the segments of each window to the PE
For Single PE BARs the process is:
1. Set the PE for segment zero on a disabled window
2. Set the range
3. Enable the window
Move the OPAL calls into their own helper functions where the quirks can be
contained.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
No need for the multi-dimensional arrays, just use a bitmap.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This prevents SR-IOV being used by making the SR-IOV BAR resources
unallocatable. Rename it to reflect what it actually does.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
SR-IOV support on PowerNV is a byzantine maze of hooks. I have no idea
how anyone is supposed to know how it works except through a lot of
stuffering. Write up some docs about the overall story to help out
the next sucker^Wperson who needs to tinker with it.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
pci-ioda.c is getting a bit unwieldly due to the amount of stuff jammed in
there. The SR-IOV support can be extracted easily enough and is mostly
standalone, so move it into a separate file.
This patch also moves the PowerNV SR-IOV specific fields from pci_dn and
moves them into a platform specific structure. I'm not sure how they ended
up in there in the first place, but leaking platform specifics into common
code has proven to be a terrible idea so far so lets stop doing that.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
We pre-configure the m64 window for IODA1 as a 1-1 segment-PE mapping,
similar to PHB3. Currently the actual mapping of segments occurs in
pnv_ioda_pick_m64_pe(), but we can move it into pnv_ioda1_init_m64() and
drop the IODA1 specific code paths in the PE setup / teardown.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There's an optimisation in the PE setup which skips performing DMA
setup for a PE if we only have bridges in a PE. The assumption being
that only "real" devices will DMA to system memory, which is probably
fair. However, if we start off with only bridge devices in a PE then
add a non-bridge device the new device won't be able to use DMA because
we never configured it.
Fix this (admittedly pretty weird) edge case by tracking whether we've done
the DMA setup for the PE or not. If a non-bridge device is added to the PE
(via rescan or hotplug, or whatever) we can set up DMA on demand.
This also means the only remaining user of the old "DMA Weight" code is
the IODA1 DMA setup code that it was originally added for, which is good.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently we have these two functions:
pnv_pci_ioda2_release_dma_pe(), and
pnv_pci_ioda2_release_pe_dma()
The first is used when tearing down VF PEs and the other is used for normal
devices. There's very little difference between the two though. The latter
(non-VF) will skip a call to pnv_pci_ioda2_unset_window() unless
CONFIG_IOMMU_API=y is set. There's no real point in doing this so fold the
two together.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a helper to go from a pci_bus structure to the pnv_phb that hosts
that bus. There's a lot of instances of the following pattern:
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
Without any other uses of the pci_controller inside the function. This
is hard to read since it requires you to memorise the contents of the
private data fields and kind of error prone since it involves blindly
assigning a void pointer. Add a helper to make it more concise and
explicit.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The EEH core has a concept of a "PE tree" to support PowerNV. The PE tree
follows the PCI bus structures because a reset asserted on an upstream
bridge will be propagated to the downstream bridges. On pseries there's a
1-1 correspondence between what the guest sees are a PHB and a PE so the
"tree" is really just a single node.
Current the EEH core is reponsible for setting up this PE tree which it
does by traversing the pci_dn tree. The structure of the pci_dn tree
matches the bus tree on PowerNV which leads to the PE tree being "correct"
this setup method doesn't make a whole lot of sense and it's actively
confusing for the pseries case where it doesn't really do anything.
We want to remove the dependence on pci_dn anyway so this patch move
choosing where to insert a new PE into the platform code rather than
being part of the generic EEH code. For PowerNV this simplifies the
tree building logic and removes the use of pci_dn. For pseries we
keep the existing logic. I'm not really convinced it does anything
due to the 1-1 PE-to-PHB correspondence so every device under that
PHB should be in the same PE, but I'd rather not remove it entirely
until we've had a chance to look at it more deeply.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The naming of eeh_{add_to|remove_from}_parent_pe() doesn't really reflect
what they actually do. If the PE referred to be edev->pe_config_addr
already exists under that PHB then the edev is added to that PE. However,
if the PE doesn't exist the a new one is created for the edev.
The bulk of the implementation of eeh_add_to_parent_pe() covers that
second case. Similarly, most of eeh_remove_from_parent_pe() is
determining when it's safe to delete a PE.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The edev->class_code field is never referenced anywhere except for the
platform specific probe functions. The same information is available in
the pci_dev for PowerNV and in the pci_dn on pseries so we can remove
the field.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There's a bunch of strange things about this code. First up is that none of
the fields being written to are functional for a VF. The SR-IOV
specification lists then as "Reserved, but OS should preserve" so writing
new values to them doesn't do anything and is clearly wrong from a
correctness perspective.
However, since VFs are designed to be managed by the OS there is an
argument to be made that we should be saving and restoring some parts of
config space. We already sort of do that by saving the first 64 bytes of
config space in the eeh_dev (see eeh_dev->config_space[]). This is
inadequate since it doesn't even consider saving and restoring the PCI
capability structures. However, this is a problem with EEH in general and
that needs to be fixed for non-VF devices too.
There's no real reason to keep around this around so delete it.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This is used in precisely one place which is in pseries specific platform
code. There's no need to have the callback in eeh_ops since the platform
chooses the EEH PE addresses anyway. The PowerNV implementation has always
been a stub too so remove it.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The pci_dn->pe_number field is mainly used to track the IODA PE number of a
device on PowerNV. At some point it grew a user in the pseries SR-IOV
support which muddies the waters a bit, so remove it.
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This function is a one line wrapper around eeh_phb_pe_create() and despite
the name it doesn't create any eeh_dev structures. Replace it with direct
calls to eeh_phb_pe_create() since that does what it says on the tin
and removes a layer of indirection.
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.
Signed-off-by: Ravi Bangoria <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
From Nick's cover letter:
Linux powerpc new system call instruction and ABI
System Call Vectored (scv) ABI
==============================
The scv instruction is introduced with POWER9 / ISA3, it comes with an
rfscv counter-part. The benefit of these instructions is
performance (trading slower SRR0/1 with faster LR/CTR registers, and
entering the kernel with MSR[EE] and MSR[RI] left enabled, which can
reduce MSR updates. The scv instruction has 128 levels (not enough to
cover the Linux system call space).
Assignment and advertisement
----------------------------
The proposal is to assign scv levels conservatively, and advertise
them with HWCAP feature bits as we add support for more.
Linux has not enabled FSCR[SCV] yet, so executing the scv instruction
will cause the kernel to log a "SCV facility unavilable" message, and
deliver a SIGILL with ILL_ILLOPC to the process. Linux has defined a
HWCAP2 bit PPC_FEATURE2_SCV for SCV support, but does not set it.
This change allocates the zero level ('scv 0'), advertised with
PPC_FEATURE2_SCV, which will be used to provide normal Linux system
calls (equivalent to 'sc').
Attempting to execute scv with other levels will cause a SIGILL to be
delivered the same as before, but will not log a "SCV facility
unavailable" message (because the processor facility is enabled).
Calling convention
------------------
The proposal is for scv 0 to provide the standard Linux system call
ABI with the following differences from sc convention[1]:
- LR is to be volatile across scv calls. This is necessary because the
scv instruction clobbers LR. From previous discussion, this should
be possible to deal with in GCC clobbers and CFI.
- cr1 and cr5-cr7 are volatile. This matches the C ABI and would allow
the kernel system call exit to avoid restoring the volatile cr
registers (although we probably still would anyway to avoid
information leaks).
- Error handling: The consensus among kernel, glibc, and musl is to
move to using negative return values in r3 rather than CR0[SO]=1 to
indicate error, which matches most other architectures, and is
closer to a function call.
Notes
-----
- r0,r4-r8 are documented as volatile in the ABI, but the kernel patch
as submitted currently preserves them. This is to leave room for
deciding which way to go with these. Some small benefit was found by
preserving them[1] but I'm not convinced it's worth deviating from
the C function call ABI just for this. Release code should follow
the ABI.
Previous discussions:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208691.html
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209268.html
[1] https://github.com/torvalds/linux/blob/master/Documentation/powerpc/syscall64-abi.rst
[2] https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209263.html
|
|
POWER9 onwards the support for the registers HID1, HID4, HID5 has been
receded.
Although mfspr on the above registers worked in Power9, In Power10
simulator is unrecognized. Moving their assignment under the
check for machines lower than Power9
Signed-off-by: Pratik Rajesh Sampat <[email protected]>
Reviewed-by: Gautham R. Shenoy <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Replace the variable name from using "pnv_first_spr_loss_level" to
"deep_spr_loss_state".
pnv_first_spr_loss_level is supposed to be the earliest state that
has OPAL_PM_LOSE_FULL_CONTEXT set, in other places the kernel uses the
"deep" states as terminology. Hence renaming the variable to be coherent
to its semantics.
Signed-off-by: Pratik Rajesh Sampat <[email protected]>
Acked-by: Gautham R. Shenoy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The POWER9 idle driver contains implementation-specific details that
means it is not suitable to run on any processor that implements ISA
v3.0 (e.g., POWER10), so only init the driver when running on a
POWER9.
Signed-off-by: Pratik Rajesh Sampat <[email protected]>
[mpe: Use updated change log from Nick]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Both the ->dump method and snprintf return an int. So switch to an
int and properly handle errors from ->dump.
Fixes: 5456ffdee666 ("powerpc/spufs: simplify spufs core dumping")
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Several device drivers hit EEH(Extended Error handling) when
triggering kdump on Pseries PowerVM. This patch implemented a reset of
the PHBs in pci general code when triggering kdump. PHB reset stop all
PCI transactions from normal kernel. We have tested the patch in
several enviroments:
- direct slot adapters
- adapters under the switch
- a VF adapter in PowerVM
- a VF adapter/adapter in KVM guest.
Signed-off-by: Wen Xiong <[email protected]>
[mpe: Fix broken whitespace, subject & SOB formatting]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for the scv instruction on POWER9 and later CPUs.
For now this implements the zeroth scv vector 'scv 0', as identical to
'sc' system calls, with the exception that LR is not preserved, nor
are volatile CR registers, and error is not indicated with CR0[SO],
but by returning a negative errno.
rfscv is implemented to return from scv type system calls. It can not
be used to return from sc system calls because those are defined to
preserve LR.
getpid syscall throughput on POWER9 is improved by 26% (428 to 318
cycles), largely due to reducing mtmsr and mtspr.
Signed-off-by: Nicholas Piggin <[email protected]>
[mpe: Fix ppc64e build]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
PowerISA v3.1 has few updates for the Branch History Rolling
Buffer(BHRB).
BHRB disable is controlled via Monitor Mode Control Register A (MMCRA)
bit, namely "BHRB Recording Disable (BHRBRD)". This field controls
whether BHRB entries are written when BHRB recording is enabled by
other bits. This patch implements support for this BHRB disable bit.
By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to
this bit will have BHRB enabled. This addresses backward
compatibility (for older OS), since this bit will be cleared and
hardware will be writing to BHRB by default.
This patch addresses changes to set MMCRA (BHRBRD) at boot for
power10 (there by the core will run faster) and enable this feature
only on runtime ie, on explicit need from user. Also save/restore
MMCRA in the restore path of state-loss idle state to make sure we
keep BHRB disabled if it was not enabled on request at runtime.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently the spu coredump code triggers an RCU warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-01755-g7cd49f0b7ec7 #1 Not tainted
-----------------------------
include/linux/fdtable.h:95 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by spu-coredump/1343:
#0: c0000007fa22f430 (sb_writers#2){.+.+}-{0:0}, at: .do_coredump+0x1010/0x13c8
stack backtrace:
CPU: 0 PID: 1343 Comm: spu-coredump Not tainted 5.7.0-rc3-01755-g7cd49f0b7ec7 #1
Call Trace:
.dump_stack+0xec/0x15c (unreliable)
.lockdep_rcu_suspicious+0x120/0x144
.coredump_next_context+0x148/0x158
.spufs_coredump_extra_notes_size+0x54/0x190
.elf_coredump_extra_notes_size+0x34/0x50
.elf_core_dump+0xe48/0x19d0
.do_coredump+0xe50/0x13c8
.get_signal+0x864/0xd88
.do_notify_resume+0x158/0x3c8
.interrupt_exit_user_prepare+0x19c/0x208
interrupt_return+0x14/0x1c0
This comes from fcheck_files() via fcheck().
It's pretty clearly documented that fcheck() must be wrapped with
rcu_read_lock(), adding that fixes the RCU warning.
hch points out that once we've released the RCU read lock the file may
be closed and freed, which would leave us with a pointer to a freed
spu_context.
To avoid that, take a reference to the spu_context while we hold the
RCU read lock, and drop that reference later once we're done with the
context.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Subscribe to the MCE notification and add the physical address which
generated a memory error to nvdimm bad range.
Signed-off-by: Santosh Sivaraj <[email protected]>
Reviewed-by: Mahesh Salgaonkar <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To enable memory unplug without splitting kernel page table
mapping, we force the max mapping size to the LMB size. LMB
size is the unit in which hypervisor will do memory add/remove
operation.
Pseries systems supports max LMB size of 256MB. Hence on pseries,
we now end up mapping memory with 2M page size instead of 1G. To improve
that we want hypervisor to hint the kernel about the hotplug
memory range. That was added that as part of
commit b6eca183e23e ("powerpc/kernel: Enables memory
hot-remove after reboot on pseries guests")
But PowerVM doesn't provide that hint yet. Once we get PowerVM
updated, we can then force the 2M mapping only to hot-pluggable
memory region using memblock_is_hotpluggable(). Till then
let's depend on LMB size for finding the mapping page size
for linear range.
With this change KVM guest will also be doing linear mapping with
2M page size.
The actual TLB benefit of mapping guest page table entries with
hugepage size can only be materialized if the partition scoped
entries are also using the same or higher page size. A guest using
1G hugetlbfs backing guest memory can have a performance impact with
the above change.
Signed-off-by: Bharata B Rao <[email protected]>
Signed-off-by: Aneesh Kumar K.V <[email protected]>
[mpe: Fold in fix from Aneesh spotted by [email protected]]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Merge our fixes branch, primarily to bring in the ebb selftests build
fix and the pkey fix, which is a dependency for some future work.
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <[email protected]> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <[email protected]> # IB
Acked-by: Kalle Valo <[email protected]> # wireless drivers
Reviewed-by: Chao Yu <[email protected]> # erofs
Signed-off-by: Kees Cook <[email protected]>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Booting with a 4GB LMB size causes us to panic:
qemu-system-ppc64: OS terminated: OS panic:
Memory block size not suitable: 0x0
Fix pseries_memory_block_size() to handle 64 bit LMBs.
Cc: [email protected]
Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
pseries_update_drconf_memory() runs from a DT notifier in response to
an update to the ibm,dynamic-memory property of the
/ibm,dynamic-reconfiguration-memory node. This property is an older
less compact format than the ibm,dynamic-memory-v2 property used in
most currently supported firmwares. There has never been an equivalent
function for the v2 property.
pseries_update_drconf_memory() compares the 'assigned' flag for each
LMB in the old vs new properties and adds or removes the block
accordingly. However it appears to be of no actual utility:
* Partition suspension and PRRNs are specified only to change LMBs'
NUMA affinity information. This notifier should be a no-op for those
scenarios since the assigned flags should not change.
* The memory hotplug/DLPAR path has a hack which short-circuits
execution of the notifier:
dlpar_memory()
...
rtas_hp_event = true;
drmem_update_dt()
of_update_property()
pseries_memory_notifier()
pseries_update_drconf_memory()
if (rtas_hp_event) return;
So this code only makes sense as a relic of the time when more of the
DLPAR workflow took place in user space. I don't see a purpose for it
now.
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
dlpar_cpu_readd() is unused now.
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
dlpar_memory() no longer has any callers which pass
PSERIES_HP_ELOG_ACTION_READD. Remove this case and the corresponding
unreachable code.
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
pseries_devicetree_update() is no longer called with PRRN_SCOPE. The
purpose of prrn_update_node() was to remove and then add back a LMB
whose NUMA assignment had changed. This has never been reliable, and
this codepath has been default-disabled for several releases. Remove
prrn_update_node().
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
These APIs have become no-ops, so remove them and all call sites.
Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
timed_topology_update is a no-op now, so remove it and all call sites.
Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit 120496ac2d2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit 9fb603050ffd ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit dfd718a2ed1f ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This effectively reverts commit 3aa565f53c39 ("powerpc/pseries: Add
hooks to put the CPU into an appropriate offline state"), which added
an offline mode for CPUs which uses the H_CEDE hcall instead of the
architected stop-self RTAS function in order to facilitate "folding"
of dedicated mode processors on PowerVM platforms to achieve energy
savings. This has been the default offline mode since its
introduction.
There's nothing about stop-self that would prevent the hypervisor from
achieving the energy savings available via H_CEDE, so the original
premise of this change appears to be flawed.
I also have encountered the claim that the transition to and from
ceded state is much faster than stop-self/start-cpu. Certainly we
would not want to use stop-self as an *idle* mode. That is what H_CEDE
is for. However, this difference is insignificant in the context of
Linux CPU hotplug, where the latency of an offline or online operation
on current systems is on the order of 100ms, mainly attributable to
all the various subsystems' cpuhp callbacks.
The cede offline mode also prevents accurate accounting, as discussed
before:
https://lore.kernel.org/linuxppc-dev/[email protected]/
Unconditionally use stop-self to offline processor threads. This is
the architected method for offlining CPUs on PAPR systems.
The "cede_offline" boot parameter is rendered obsolete.
Removing this code enables the removal of the partition suspend code
which temporarily onlines all present CPUs.
Fixes: 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state")
Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Gautham R. Shenoy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
With kernel now supporting new pmem flush/sync instructions, we can now
enable the kernel to initialize the device. On P10 these devices would
appear with a new compatible string. For PAPR device we have
compatible "ibm,pmemory-v2"
and for OF pmem device we have
compatible "pmem-region-v2"
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|