aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/powernv
AgeCommit message (Collapse)AuthorFilesLines
2019-08-22powerpc/eeh: Refactor around eeh_probe_devices()Sam Bobroff1-3/+1
Now that EEH support for all devices (on PowerNV and pSeries) is provided by the pcibios bus add device hooks, eeh_probe_devices() and eeh_addr_cache_build() are redundant and can be removed. Move the EEH enabled message into it's own function so that it can be called from multiple places. Note that previously on pSeries, useless EEH sysfs files were created for some devices that did not have EEH support and this change prevents them from being created. Signed-off-by: Sam Bobroff <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/33b0a6339d5ac88693de092d6fba984f2a5add66.1565930772.git.sbobroff@linux.ibm.com
2019-08-22powerpc/eeh: EEH for pSeries hot plugSam Bobroff1-12/+27
On PowerNV and pSeries, devices currently acquire EEH support from several different places: Boot-time devices from eeh_probe_devices() and eeh_addr_cache_build(), Virtual Function devices from the pcibios bus add device hooks and hot plugged devices from pci_hp_add_devices() (with other platforms using other methods as well). Unfortunately, pSeries machines currently discover hot plugged devices using pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do not receive EEH support. Rather than adding another case for pci_rescan_bus(), this change widens the scope of the pcibios bus add device hooks so that they can handle all devices. As a side effect this also supports devices discovered after manually rescanning via /sys/bus/pci/rescan. Note that on PowerNV, this change allows the EEH subsystem to become enabled after boot as long as it has not been forced off, which was not previously possible (it was already possible on pSeries). Signed-off-by: Sam Bobroff <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/72ae8ae9c54097158894a52de23690448de38ea9.1565930772.git.sbobroff@linux.ibm.com
2019-08-22powerpc/eeh: Improve debug messages around device additionSam Bobroff1-4/+10
Also remove useless comment. Signed-off-by: Sam Bobroff <[email protected]> Reviewed-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/59db84f4bf94718a12f206bc923ac797d47e4cc1.1565930772.git.sbobroff@linux.ibm.com
2019-08-19powerpc/powernv/ioda2: Create bigger default window with 64k IOMMU pagesAlexey Kardashevskiy1-7/+35
At the moment we create a small window only for 32bit devices, the window maps 0..2GB of the PCI space only. For other devices we either use a sketchy bypass or hardware bypass but the former can only work if the amount of RAM is no bigger than the device's DMA mask and the latter requires devices to support at least 59bit DMA. This extends the default DMA window to the maximum size possible to allow a wider DMA mask than just 32bit. The default window size is now limited by the the iommu_table::it_map allocation bitmap which is a contiguous array, 1 bit per an IOMMU page. This increases the default IOMMU page size from hard coded 4K to the system page size to allow wider DMA masks. This increases the level number to not exceed the max order allocation limit per TCE level. By the same time, this keeps minimal levels number as 2 in order to save memory. As the extended window now overlaps the 32bit MMIO region, this adds an area reservation to iommu_init_table(). After this change the default window size is 0x80000000000==1<<43 so devices limited to DMA mask smaller than the amount of system RAM can still use more than just 2GB of memory for DMA. This is an optimization and not a bug fix for DMA API usage. With the on-demand allocation of indirect TCE table levels enabled and 2 levels, the first TCE level size is just 1<<ceil((log2(0x7ffffffffff+1)-16)/2)=16384 TCEs or 2 system pages. Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-19powerpc/powernv/ioda2: Allocate TCE table levels on demand for default DMA ↵Alexey Kardashevskiy2-11/+11
window We allocate only the first level of multilevel TCE tables for KVM already (alloc_userspace_copy==true), and the rest is allocated on demand. This is not enabled though for bare metal. This removes the KVM limitation (implicit, via the alloc_userspace_copy parameter) and always allocates just the first level. The on-demand allocation of missing levels is already implemented. As from now on DMA map might happen with disabled interrupts, this allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1]. In practice just a single page is allocated there so chances for failure are quite low. To save time when creating a new clean table, this skips non-allocated indirect TCE entries in pnv_tce_free just like we already do in the VFIO IOMMU TCE driver. This changes the default level number from 1 to 2 to reduce the amount of memory required for the default 32bit DMA window at the boot time. The default window size is up to 2GB which requires 4MB of TCEs which is unlikely to be used entirely or at all as most devices these days are 64bit capable so by switching to 2 levels by default we save 4032KB of RAM per a device. While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace can trigger this path via VFIO, see the failure and try creating a table again with different parameters which might succeed. [1]: === BUG: sleeping function called from invalid context at mm/page_alloc.c:4596 in_atomic(): 1, irqs_disabled(): 1, pid: 1038, name: scsi_eh_1 2 locks held by scsi_eh_1/1038: #0: 000000005efd659a (&host->eh_mutex){+.+.}, at: ata_eh_acquire+0x34/0x80 #1: 0000000006cf56a6 (&(&host->lock)->rlock){....}, at: ata_exec_internal_sg+0xb0/0x5c0 irq event stamp: 500 hardirqs last enabled at (499): [<c000000000cb8a74>] _raw_spin_unlock_irqrestore+0x94/0xd0 hardirqs last disabled at (500): [<c000000000cb85c4>] _raw_spin_lock_irqsave+0x44/0x120 softirqs last enabled at (0): [<c000000000101120>] copy_process.isra.4.part.5+0x640/0x1a80 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 73 PID: 1038 Comm: scsi_eh_1 Not tainted 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Call Trace: [c000003d064cef50] [c000000000c8e6c4] dump_stack+0xe8/0x164 (unreliable) [c000003d064cefa0] [c00000000014ed78] ___might_sleep+0x2f8/0x310 [c000003d064cf020] [c0000000003ca084] __alloc_pages_nodemask+0x2a4/0x1560 [c000003d064cf220] [c0000000000c2530] pnv_alloc_tce_level.isra.0+0x90/0x130 [c000003d064cf290] [c0000000000c2888] pnv_tce+0x128/0x3b0 [c000003d064cf360] [c0000000000c2c00] pnv_tce_build+0xb0/0xf0 [c000003d064cf3c0] [c0000000000bbd9c] pnv_ioda2_tce_build+0x3c/0xb0 [c000003d064cf400] [c00000000004cfe0] ppc_iommu_map_sg+0x210/0x550 [c000003d064cf510] [c00000000004b7a4] dma_iommu_map_sg+0x74/0xb0 [c000003d064cf530] [c000000000863944] ata_qc_issue+0x134/0x470 [c000003d064cf5b0] [c000000000863ec4] ata_exec_internal_sg+0x244/0x5c0 [c000003d064cf700] [c0000000008642d0] ata_exec_internal+0x90/0xe0 [c000003d064cf780] [c0000000008650ac] ata_dev_read_id+0x2ec/0x640 [c000003d064cf8d0] [c000000000878e28] ata_eh_recover+0x948/0x16d0 [c000003d064cfa10] [c00000000087d760] sata_pmp_error_handler+0x480/0xbf0 [c000003d064cfbc0] [c000000000884624] ahci_error_handler+0x74/0xe0 [c000003d064cfbf0] [c000000000879fa8] ata_scsi_port_error_handler+0x2d8/0x7c0 [c000003d064cfca0] [c00000000087a544] ata_scsi_error+0xb4/0x100 [c000003d064cfd00] [c000000000802450] scsi_error_handler+0x120/0x510 [c000003d064cfdb0] [c000000000140c48] kthread+0x1b8/0x1c0 [c000003d064cfe20] [c00000000000bd8c] ret_from_kernel_thread+0x5c/0x70 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) irq event stamp: 2305 ======================================================== hardirqs last enabled at (2305): [<c00000000000e4c8>] fast_exc_return_irq+0x28/0x34 hardirqs last disabled at (2303): [<c000000000cb9fd0>] __do_softirq+0x4a0/0x654 WARNING: possible irq lock inversion dependency detected 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G W softirqs last enabled at (2304): [<c000000000cba054>] __do_softirq+0x524/0x654 softirqs last disabled at (2297): [<c00000000010f278>] irq_exit+0x128/0x180 -------------------------------------------------------- swapper/0/0 just changed the state of lock: 0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120 but this lock took another, HARDIRQ-unsafe lock in the past: (fs_reclaim){+.+.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); local_irq_disable(); lock(&(&host->lock)->rlock); lock(fs_reclaim); <Interrupt> lock(&(&host->lock)->rlock); *** DEADLOCK *** no locks held by swapper/0/0. the shortest dependencies between 2nd lock and 1st lock: -> (fs_reclaim){+.+.} ops: 167579 { HARDIRQ-ON-W at: lock_acquire+0xf8/0x2a0 fs_reclaim_acquire.part.23+0x44/0x60 kmem_cache_alloc_node_trace+0x80/0x590 alloc_desc+0x64/0x270 __irq_alloc_descs+0x2e4/0x3a0 irq_domain_alloc_descs+0xb0/0x150 irq_create_mapping+0x168/0x2c0 xics_smp_probe+0x2c/0x98 pnv_smp_probe+0x40/0x9c smp_prepare_cpus+0x524/0x6c4 kernel_init_freeable+0x1b4/0x650 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x70 SOFTIRQ-ON-W at: lock_acquire+0xf8/0x2a0 fs_reclaim_acquire.part.23+0x44/0x60 kmem_cache_alloc_node_trace+0x80/0x590 alloc_desc+0x64/0x270 __irq_alloc_descs+0x2e4/0x3a0 irq_domain_alloc_descs+0xb0/0x150 irq_create_mapping+0x168/0x2c0 xics_smp_probe+0x2c/0x98 pnv_smp_probe+0x40/0x9c smp_prepare_cpus+0x524/0x6c4 kernel_init_freeable+0x1b4/0x650 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x70 INITIAL USE at: lock_acquire+0xf8/0x2a0 fs_reclaim_acquire.part.23+0x44/0x60 kmem_cache_alloc_node_trace+0x80/0x590 alloc_desc+0x64/0x270 __irq_alloc_descs+0x2e4/0x3a0 irq_domain_alloc_descs+0xb0/0x150 irq_create_mapping+0x168/0x2c0 xics_smp_probe+0x2c/0x98 pnv_smp_probe+0x40/0x9c smp_prepare_cpus+0x524/0x6c4 kernel_init_freeable+0x1b4/0x650 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x70 } === Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: Alistair Popple <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-19powerpc/powernv/ioda: Fix race in TCE level allocationAlexey Kardashevskiy1-5/+13
pnv_tce() returns a pointer to a TCE entry and originally a TCE table would be pre-allocated. For the default case of 2GB window the table needs only a single level and that is fine. However if more levels are requested, it is possible to get a race when 2 threads want a pointer to a TCE entry from the same page of TCEs. This adds cmpxchg to handle the race. Note that once TCE is non-zero, it cannot become zero again. Fixes: a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand") CC: [email protected] # v4.19+ Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-05powerpc/powernv: Restrict OPAL symbol map to only be readable by rootAndrew Donnellan1-4/+7
Currently the OPAL symbol map is globally readable, which seems bad as it contains physical addresses. Restrict it to root. Fixes: c8742f85125d ("powerpc/powernv: Expose OPAL firmware symbol map") Cc: [email protected] # v3.19+ Suggested-by: Michael Ellerman <[email protected]> Signed-off-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-05powerpc/powernv: Fix checkpatch warnings in opal-xscom.cAndrew Donnellan1-4/+4
Signed-off-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-05powerpc/powernv: Get rid of old scom_controller abstractionAndrew Donnellan4-351/+142
Once upon a time, the SCOM access code was used by the WSP platform as well as powernv. Thus it made sense to have a generic SCOM access interface to abstract between different platforms. Now that it's just powernv, with no other platforms currently on the horizon, let's rip out scom_controller and make everything much simpler and more direct. While we're here, fix up the comment block at the top. Signed-off-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-05powerpc/powernv: Remove dead SCOM access codeAndrew Donnellan2-94/+0
Nothing is using scom_map_device() or scom_find_parent(). Remove them. Also don't export scom_controller, there are no other users of it. Signed-off-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-05powerpc/powernv: Move SCOM access code into powernv platformAndrew Donnellan5-3/+378
The powernv platform is the only one that directly accesses SCOMs. Move the support code to platforms/powernv, and get rid of the PPC_SCOM Kconfig option, as SCOM support is always selected when compiling for powernv. This also means that the Kconfig item for CONFIG_SCOM_DEBUGFS will show up in menuconfig in the platform menu, rather than at the root, which is a much better location. Signed-off-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-07-18mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of ↵David Hildenbrand1-12/+11
pfns walk_memory_range() was once used to iterate over sections. Now, it iterates over memory blocks. Rename the function, fixup the documentation. Also, pass start+size instead of PFNs, which is what most callers already have at hand. (we'll rework link_mem_sections() most probably soon) Follow-up patches will rework, simplify, and move walk_memory_blocks() to drivers/base/memory.c. Note: walk_memory_blocks() only works correctly right now if the start_pfn is aligned to a section start. This is the case right now, but we'll generalize the function in a follow up patch so the semantics match the documentation. [[email protected]: remove unused variable] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: David Hildenbrand <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Len Brown <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Rashmica Gupta <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Michael Neuling <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Wei Yang <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Qian Cai <[email protected]> Cc: Arun KS <[email protected]> Cc: Nick Desaulniers <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-07-13Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds11-764/+87
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
2019-07-12powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.Athira Rajeev1-1/+1
commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") reimplemented book3S code to pltform/powernv/idle.c. But when doing so missed to add the per-thread LDBAR update in the core_woken path of the power9_idle_stop(). Patch fixes the same. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: [email protected] # v5.2+ Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Reviewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-07-03powerpc/powernv-eeh: Consisely desribe what this file doesStewart Smith1-3/+1
If the previous comment made sense, continue debugging or call your doctor immediately. Signed-off-by: Stewart Smith <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-07-03powerpc/powernv: Fix stale iommu table base after VFIOAlexey Kardashevskiy1-0/+10
The powernv platform uses @dma_iommu_ops for non-bypass DMA. These ops need an iommu_table pointer which is stored in dev->archdata.iommu_table_base. It is initialized during pcibios_setup_device() which handles boot time devices. However when a device is taken from the system in order to pass it through, the default IOMMU table is destroyed but the pointer in a device is not updated; also when a device is returned back to the system, a new table pointer is not stored in dev->archdata.iommu_table_base either. So when a just returned device tries using IOMMU, it crashes on accessing stale iommu_table or its members. This calls set_iommu_table_base() when the default window is created. Note it used to be there before but was wrongly removed (see "fixes"). It did not appear before as these days most devices simply use bypass. This adds set_iommu_table_base(NULL) when a device is taken from the system to make it clear that IOMMU DMA cannot be used past that point. Fixes: c4e9d3c1e65a ("powerpc/powernv/pseries: Rework device adding to IOMMU groups") Cc: [email protected] # v5.0+ Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-07-03powerpc/64s: Rename PPC_INVALIDATE_ERAT to PPC_ISA_3_0_INVALIDATE_ERATNicholas Piggin1-1/+1
This makes it clear to the caller that it can only be used on POWER9 and later CPUs. Signed-off-by: Nicholas Piggin <[email protected]> [mpe: Use "ISA_3_0" rather than "ARCH_300"] Signed-off-by: Michael Ellerman <[email protected]>
2019-07-01powerpc/powernv: remove the unused vas_win_paste_addr and vas_win_id functionsChristoph Hellwig2-39/+0
These two function have never been used anywhere in the kernel tree since they were added to the kernel. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-07-01powerpc/powernv: remove unused NPU DMA codeChristoph Hellwig1-556/+0
None of these routines were ever used anywhere in the kernel tree since they were added to the kernel. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-07-01powerpc/powernv: remove the unused tunneling exportsChristoph Hellwig3-73/+3
These have been unused anywhere in the kernel tree ever since they've been added to the kernel. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-07-01powerpc/powernv: remove the unused pnv_pci_set_p2p functionChristoph Hellwig3-80/+0
This function has never been used anywhere in the kernel tree since it was added to the tree. We also now have proper PCIe P2P APIs in the core kernel, and any new P2P support should be using those. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-06-19powerpc/64s: Fix misleading SPR and timebase informationShaokun Zhang1-2/+2
pr_info shows SPR and timebase as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: Michael Ellerman <[email protected]> Cc: Nicholas Piggin <[email protected]> Signed-off-by: Shaokun Zhang <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-06-02Merge tag 'powerpc-5.2-3' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A minor fix to our IMC PMU code to print a less confusing error message when the driver can't initialise properly. A fix for a bug where a user requesting an unsupported branch sampling filter can corrupt PMU state, preventing the PMU from counting properly. And finally a fix for a bug in our support for kexec_file_load(), which prevented loading a kernel and initramfs. Most versions of kexec don't yet use kexec_file_load(). Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi Bangoria, Thiago Jung Bauermann" * tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load() powerpc/perf: Fix MMCRA corruption by bhrb_filter powerpc/powernv: Return for invalid IMC domain
2019-06-02powerpc/powernv/npu: Fix reference leakGreg Kurz1-1/+14
Since 902bdc57451c, get_pci_dev() calls pci_get_domain_bus_and_slot(). This has the effect of incrementing the reference count of the PCI device, as explained in drivers/pci/search.c: * Given a PCI domain, bus, and slot/function number, the desired PCI * device is located in the list of PCI devices. If the device is * found, its reference count is increased and this function returns a * pointer to its data structure. The caller must decrement the * reference count by calling pci_dev_put(). If no device is found, * %NULL is returned. Nothing was done to call pci_dev_put() and the reference count of GPU and NPU PCI devices rockets up. A natural way to fix this would be to teach the callers about the change, so that they call pci_dev_put() when done with the pointer. This turns out to be quite intrusive, as it affects many paths in npu-dma.c, pci-ioda.c and vfio_pci_nvlink2.c. Also, the issue appeared in 4.16 and some affected code got moved around since then: it would be problematic to backport the fix to stable releases. All that code never cared for reference counting anyway. Call pci_dev_put() from get_pci_dev() to revert to the previous behavior. Fixes: 902bdc57451c ("powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn") Cc: [email protected] # v4.16 Signed-off-by: Greg Kurz <[email protected]> Reviewed-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-06-02powerpc/powernv: Show checkstop reason for NPU2 HMIsFrederic Barrat1-0/+40
If the kernel is notified of an HMI caused by the NPU2, it's currently not being recognized and it logs the default message: Unknown Malfunction Alert of type 3 The NPU on Power 9 has 3 Fault Isolation Registers, so that's a lot of possible causes, but we should at least log that it's an NPU problem and report which FIR and which bit were raised if opal gave us the information. Signed-off-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-06-02powerpc/powernv: Update firmware archaeology around OPAL_HANDLE_HMIStewart Smith1-8/+15
The first machines to ship with OPAL firmware all got firmware updates that have the new call, but just in case someone is foolish enough to believe the first 4 months of firmware is the best, we keep this code around. Comment is updated to not refer to late 2014 as recent or the future. Signed-off-by: Stewart Smith <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Richard Fontana <[email protected]> Reviewed-by: Steve Winslow <[email protected]> Reviewed-by: Alexios Zavras <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Richard Fontana <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner3-42/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Richard Fontana <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner34-170/+34
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Richard Fontana <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-22powerpc/powernv: Return for invalid IMC domainAnju T Sudhakar1-0/+4
Currently init_imc_pmu() can fail either because we try to register an IMC unit with an invalid domain (i.e an IMC node not supported by the kernel) or something went wrong while registering a valid IMC unit. In both the cases kernel provides a 'Register failed' error message. For example when trace-imc node is not supported by the kernel, but skiboot advertises a trace-imc node we print: IMC Unknown Device type IMC PMU (null) Register failed To avoid confusion just print the unknown device type message, before attempting PMU registration, so the second message isn't printed. Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device") Reported-by: Pavaman Subramaniyam <[email protected]> Signed-off-by: Anju T Sudhakar <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> [mpe: Reword change log a bit] Signed-off-by: Michael Ellerman <[email protected]>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-13/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Jilayne Lovejoy <[email protected]> Reviewed-by: Steve Winslow <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-14Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds1-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
2019-05-03powerpc/perf: Trace imc events detection and cpuhotplugAnju T Sudhakar1-0/+3
Patch detects trace-imc events, does memory initilizations for each online cpu, and registers cpuhotplug call-backs. Signed-off-by: Anju T Sudhakar <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-05-03powerpc/perf: Fix loop exit condition in nest_imc_event_initAnju T Sudhakar1-1/+1
The data structure (i.e struct imc_mem_info) to hold the memory address information for nest imc units is allocated based on the number of nodes in the system. nest_imc_event_init() traverse this struct array to calculate the memory base address for the event-cpu. If we fail to find a match for the event cpu's chip-id in imc_mem_info struct array, then the do-while loop will iterate until we crash. Fix this by changing the loop exit condition based on the number of non zero vbase elements in the array, since the allocation is done for nr_chips + 1. Reported-by: Dan Carpenter <[email protected]> Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support") Signed-off-by: Anju T Sudhakar <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-05-03powerpc/powernv/ioda2: Add __printf format/argument verificationJoe Perches2-15/+18
Fix fallout too. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-05-03powerpc/hmi: Fix kernel hang when TB is in error state.Mahesh Salgaonkar3-1/+26
On TOD/TB errors timebase register stops/freezes until HMI error recovery gets TOD/TB back into running state. On successful recovery, TB starts running again and udelay() that relies on TB value continues to function properly. But in case when HMI fails to recover from TOD/TB errors, the TB register stay freezed. With TB not running the __delay() function keeps looping and never return. If __delay() is called while in panic path then system hangs and never reboots after panic. Signed-off-by: Mahesh Salgaonkar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-05-01powerpc/powernv/mce: Print correct severity for MCE error.Mahesh Salgaonkar1-1/+1
Currently all machine check errors are printed as severe errors which isn't correct. Print soft errors as warning instead of severe errors. Signed-off-by: Mahesh Salgaonkar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-04-30powerpc/powernv/ioda: Handle failures correctly in ↵Alexey Kardashevskiy1-2/+2
pnv_pci_ioda_iommu_bypass_supported() When the return value type was changed from int to bool, few places were left unchanged, this fixes them. We did not hit these failures as the first one is not happening at all and the second one is little more likely to happen if the user switches a 33..58bit DMA capable device between the VFIO and vendor drivers and there are not so many of these. Fixes: 2d6ad41b2c21 ("powerpc/powernv: use the generic iommu bypass code") Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-04-30Merge branch 'topic/ppc-kvm' into nextMichael Ellerman3-174/+733
Merge our topic branch shared with KVM. In particular this includes the rewrite of the idle code into C.
2019-04-30powerpc/powernv/idle: Restore AMR/UAMOR/AMOR/IAMR after idleMichael Ellerman1-6/+46
This is an implementation of commits 53a712bae5dd ("powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle") and a3f3072db6ca ("powerpc/powernv/idle: Restore IAMR after idle") using the new C-based idle code. Signed-off-by: Nicholas Piggin <[email protected]> [mpe: Extract from Nick's patch] Signed-off-by: Michael Ellerman <[email protected]>
2019-04-30powerpc/64s: Reimplement book3s idle code in CNicholas Piggin2-174/+690
Reimplement Book3S idle code in C, moving POWER7/8/9 implementation speific HV idle code to the powernv platform code. Book3S assembly stubs are kept in common code and used only to save the stack frame and non-volatile GPRs before executing architected idle instructions, and restoring the stack and reloading GPRs then returning to C after waking from idle. The complex logic dealing with threads and subcores, locking, SPRs, HMIs, timebase resync, etc., is all done in C which makes it more maintainable. This is not a strict translation to C code, there are some significant differences: - Idle wakeup no longer uses the ->cpu_restore call to reinit SPRs, but saves and restores them itself. - The optimisation where EC=ESL=0 idle modes did not have to save GPRs or change MSR is restored, because it's now simple to do. ESL=1 sleeps that do not lose GPRs can use this optimization too. - KVM secondary entry and cede is now more of a call/return style rather than branchy. nap_state_lost is not required because KVM always returns via NVGPR restoring path. - KVM secondary wakeup from offline sequence is moved entirely into the offline wakeup, which avoids a hwsync in the normal idle wakeup path. Performance measured with context switch ping-pong on different threads or cores, is possibly improved a small amount, 1-3% depending on stop state and core vs thread test for shallow states. Deep states it's in the noise compared with other latencies. KVM improvements: - Idle sleepers now always return to caller rather than branch out to KVM first. - This allows optimisations like very fast return to caller when no state has been lost. - KVM no longer requires nap_state_lost because it controls NVGPR save/restore itself on the way in and out. - The heavy idle wakeup KVM request check can be moved out of the normal host idle code and into the not-performance-critical offline code. - KVM nap code now returns from where it is called, which makes the flow a bit easier to follow. Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Nicholas Piggin <[email protected]> [mpe: Squash the KVM changes in] Signed-off-by: Michael Ellerman <[email protected]>
2019-04-29powerpc/powernv/npu: Use pci_dev_id() helperHeiner Kallweit1-8/+6
Use new helper pci_dev_id() to simplify the code. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Alexey Kardashevskiy <[email protected]>
2019-04-20powerpc/powernv: Squash sparse warnings in opal-call.cAndrew Donnellan1-0/+2
sparse complains a lot about opal-call.c: arch/powerpc/platforms/powernv/opal-call.c:128:1: warning: symbol 'opal_invalid_call' was not declared. Should it be static? arch/powerpc/platforms/powernv/opal-call.c:129:1: warning: symbol 'opal_console_write' was not declared. Should it be static? arch/powerpc/platforms/powernv/opal-call.c:130:1: warning: symbol 'opal_console_read' was not declared. Should it be static? Those symbols are forward declared in opal.h, but we can't include that because the function signatures in opal.h are different. So instead, just add an extra forward declaration to the OPAL_CALL macro to shut sparse up. Signed-off-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-04-11powerpc/xive: add OPAL extensions for the XIVE native exploitation supportCédric Le Goater1-0/+3
The support for XIVE native exploitation mode in Linux/KVM needs a couple more OPAL calls to get and set the state of the XIVE internal structures being used by a sPAPR guest. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: David Gibson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-03-16Merge tag 'powerpc-5.1-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix to prevent runtime allocation of 16GB pages when running in a VM (as opposed to bare metal), because it doesn't work. A small fix to our recently added KCOV support to exempt some more code from being instrumented. Plus a few minor build fixes, a small dead code removal and a defconfig update. Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy, Jason Yan, Joel Stanley, Mahesh Salgaonkar, Mathieu Malaterre" * tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Include <asm/nmi.h> header file to fix a warning powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS powerpc/mm: Disable kcov for SLB routines powerpc: remove dead code in head_fsl_booke.S powerpc/configs: Sync skiroot defconfig powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration
2019-03-13powerpc/powernv: Fix compile without CONFIG_TRACEPOINTSAlexey Kardashevskiy1-0/+1
The functions returns s64 but the return statement is missing. This adds the missing return statement. Fixes: 75d9fc7fd94e ("powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C") Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport2-0/+11
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [[email protected]: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [[email protected]: fix xtensa printk warning] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Anders Roxell <[email protected]> Reviewed-by: Guo Ren <[email protected]> [c-sky] Acked-by: Paul Burton <[email protected]> [MIPS] Acked-by: Heiko Carstens <[email protected]> [s390] Reviewed-by: Juergen Gross <[email protected]> [Xen] Reviewed-by: Geert Uytterhoeven <[email protected]> [m68k] Acked-by: Max Filippov <[email protected]> [xtensa] Cc: Catalin Marinas <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Dennis Zhou <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Rob Herring <[email protected]> Cc: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-03-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+1
Merge more updates from Andrew Morton: - some of the rest of MM - various misc things - dynamic-debug updates - checkpatch - some epoll speedups - autofs - rapidio - lib/, lib/lzo/ updates * emailed patches from Andrew Morton <[email protected]>: (83 commits) samples/mic/mpssd/mpssd.h: remove duplicate header kernel/fork.c: remove duplicated include include/linux/relay.h: fix percpu annotation in struct rchan arch/nios2/mm/fault.c: remove duplicate include unicore32: stop printing the virtual memory layout MAINTAINERS: fix GTA02 entry and mark as orphan mm: create the new vm_fault_t type arm, s390, unicore32: remove oneliner wrappers for memblock_alloc() arch: simplify several early memory allocations openrisc: simplify pte_alloc_one_kernel() sh: prefer memblock APIs returning virtual address microblaze: prefer memblock API returning virtual address powerpc: prefer memblock APIs returning virtual address lib/lzo: separate lzo-rle from lzo lib/lzo: implement run-length encoding lib/lzo: fast 8-byte copy on arm64 lib/lzo: 64-bit CTZ on arm64 lib/lzo: tidy-up ifdefs ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size ipc: annotate implicit fall through ...
Powered by cgit, Gruvboxed by Blaster4385.