aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)AuthorFilesLines
2023-04-20powerpc/64: vmlinux support building with PCREL addresingNicholas Piggin8-25/+121
PC-Relative or PCREL addressing is an extension to the ELF ABI which uses Power ISA v3.1 PC-relative instructions to calculate addresses, rather than the traditional TOC scheme. Add an option to build vmlinux using pcrel addressing. Modules continue to use TOC addressing. - TOC address helpers and r2 are poisoned with -1 when running vmlinux. r2 could be used for something useful once things are ironed out. - Assembly must call C functions with @notoc annotation, or the linker complains aobut a missing nop after the call. This is done with the CFUNC macro introduced earlier. - Boot: with the exception of prom_init, the execution branches to the kernel virtual address early in boot, before any addresses are generated, which ensures 34-bit pcrel addressing does not miss the high PAGE_OFFSET bits. TOC relative addressing has a similar requirement. prom_init does not go to the virtual address and its addresses should not carry over to the post-prom kernel. - Ftrace trampolines are converted from TOC addressing to pcrel addressing, including module ftrace trampolines that currently use the kernel TOC to find ftrace target functions. - BPF function prologue and function calling generation are converted from TOC to pcrel. - copypage_64.S has an interesting problem, prefixed instructions have alignment restrictions so the linker can add padding, which makes the assembler treat the difference between two local labels as non-constant even if alignment is arranged so padding is not required. This may need toolchain help to solve nicely, for now move the prefix instruction out of the alternate patch section to work around it. This reduces kernel text size by about 6%. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-20powerpc: add CFUNC assembly label annotationNicholas Piggin5-78/+82
This macro is to be used in assembly where C functions are called. pcrel addressing mode requires branches to functions with a localentry value of 1 to have either a trailing nop or @notoc. This macro permits the latter without changing callers. Signed-off-by: Nicholas Piggin <[email protected]> [mpe: Add dummy definitions to fix selftests build] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-20powerpc/64: Add support to build with prefixed instructionsNicholas Piggin1-0/+2
Add an option to build kernel and module with prefixed instructions if the CPU and toolchain support it. This is not related to kernel support for userspace execution of prefixed instructions. Building with prefixed instructions breaks some extended inline asm memory addressing, for example it will provide immediates that exceed the range of simple load/store displacement. Whether this is a toolchain or a kernel asm problem remains to be seen. For now, these are replaced with simpler and less efficient direct register addressing when compiling with prefixed. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-20powerpc/64s: Run at the kernel virtual address earlier in bootNicholas Piggin1-38/+44
This mostly consolidates the Book3E and Book3S behaviour in boot WRT executing from the physical or virtual address. Book3E sets up kernel virtual linear map in start_initialization_book3e and runs from the virtual linear alias after that. This change makes Book3S begin to execute from the virtual alias at the same point. Book3S can not use its MMU for that at this point, but when the MMU is disabled, the virtual linear address correctly aliases to physical memory because the top bits of the address are ignored with MMU disabled. Secondaries execute from the virtual address similarly early. This reduces the differences between subarchs, but the main motivation was to enable the PC-relative addressing ABI for Book3S, where pointer calculations must execute from the virtual address or the top bits of the pointer will be lost. This is similar to the requirement the TOC relative addressing already has that the TOC pointer use its virtual address. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-20powerpc/64: Move initial base and TOC pointer calculationNicholas Piggin1-9/+22
A later change moves the non-prom case to run at the virtual address earlier, which calls for virtual TOC and kernel base. Split these two calculations for prom and non-prom to make that change simpler. Signed-off-by: Nicholas Piggin <[email protected]> [mpe: Retain relative_toc call for start_initialization_book3e] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-14cpu: Mark panic_smp_self_stop() __noreturnJosh Poimboeuf1-1/+1
In preparation for improving objtool's handling of weak noreturn functions, mark panic_smp_self_stop() __noreturn. Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/92d76ab5c8bf660f04fdcd3da1084519212de248.1681342859.git.jpoimboe@kernel.org
2023-04-11powerpc/32: Include thread_info.h in head_booke.hNathan Chancellor1-0/+1
When building with W=1 after commit 80b6093b55e3 ("kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds"), the following warning occurs. In file included from arch/powerpc/kvm/bookehv_interrupts.S:26: arch/powerpc/kvm/../kernel/head_booke.h:20:6: warning: "THREAD_SHIFT" is not defined, evaluates to 0 [-Wundef] 20 | #if (THREAD_SHIFT < 15) | ^~~~~~~~~~~~ THREAD_SHIFT is defined in thread_info.h but it is not directly included in head_booke.h, so it is possible for THREAD_SHIFT to be undefined. Add the include to ensure that THREAD_SHIFT is always defined. Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/[email protected]/ Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Masahiro Yamada <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc: copy_thread don't set PPR in user interrupt frame regsNicholas Piggin1-5/+0
syscalls do not set the PPR field in their interrupt frame and return from syscall always sets the default PPR for userspace, so setting the value in the ret_from_fork frame is not necessary and mildly inconsistent. Remove it. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc: copy_thread don't set _TIF_RESTOREALLNicholas Piggin2-2/+5
In the kernel user thread path, don't set _TIF_RESTOREALL because the thread is required to call kernel_execve() before it returns, which will set _TIF_RESTOREALL if necessary via start_thread(). Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc: differentiate kthread from user kernel thread startNicholas Piggin3-6/+39
Kernel created user threads start similarly to kernel threads in that they call a kernel function after first returning from _switch, so they share ret_from_kernel_thread for this. Kernel threads never return from that function though, whereas user threads often do (although some don't, e.g., IO threads). Split these startup functions in two, and catch kernel threads that improperly return from their function. This is intended to make the complicated code a little bit easier to understand. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc: copy_thread differentiate kthreads and user mode threadsNicholas Piggin1-36/+62
When copy_thread is given a kernel function to run in arg->fn, this does not necessarily mean it is a kernel thread. User threads can be created this way (e.g., kernel_init, see also x86's copy_thread()). These threads run a kernel function which may call kernel_execve() and return, which returns like a userspace exec(2) syscall. Kernel threads are to be differentiated with PF_KTHREAD, will always have arg->fn set, and should never return from that function, instead calling kthread_exit() to exit. Create separate paths for the kthread and user kernel thread creation logic. The kthread path will never exit and does not require a user interrupt frame, so it gets a minimal stack frame. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc/64: ret_from_fork avoid restoring regs twiceNicholas Piggin1-2/+2
If the system call return path always restores NVGPRs then there is no need for ret_from_fork to do it. The HANDLER_RESTORE_NVGPRS does the right thing for this. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc: use switch frame for ret_from_kernel_thread parametersNicholas Piggin3-6/+9
The kernel thread path in copy_thread creates a user interrupt frame on stack and stores the function and arg parameters there, and ret_from_kernel_thread loads them. This is a slightly confusing way to overload that frame. Non-volatile registers are loaded from the switch frame, so the parameters can be stored there. The user interrupt frame is now only used by user threads when they return to user. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc: copy_thread make ret_from_fork register setup consistentNicholas Piggin2-4/+1
The ret_from_fork code for 64e and 32-bit set r3 for syscall_exit_prepare the same way that 64s does, so there should be no need to special-case them in copy_thread. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-11powerpc: copy_thread remove unused pkey codeNicholas Piggin1-11/+1
The pkey registers (AMR, IAMR) do not get loaded from the switch frame so it is pointless to save anything there. Remove the dead code. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-04PCI: Introduce pci_dev_for_each_resource()Mika Westerberg1-10/+11
Instead of open-coding it everywhere introduce a tiny helper that can be used to iterate over each resource of a PCI device, and convert the most obvious users into it. While at it drop doubled empty line before pdev_sort_resources(). No functional changes intended. Suggested-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mika Westerberg <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Krzysztof Wilczyński <[email protected]>
2023-04-04powerpc/isa-bridge: Remove open coded "ranges" parsingRob Herring1-129/+37
"ranges" is a standard property with common parsing functions. Users shouldn't be implementing their own parsing of it. Reimplement the ISA brige "ranges" parsing using the common ranges iterator functions. The common routines are flexible enough to work on PCI and non-PCI to ISA bridges, so refactor pci_process_ISA_OF_ranges() and isa_bridge_init_non_pci() into a single implementation. Signed-off-by: Rob Herring <[email protected]> [mpe: Unsplit some strings and use pr_xxx()] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-04-03Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman2-2/+13
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-04-02Merge tag 'powerpc-6.3-4' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y) - Fix oops when a PF_IO_WORKER thread tries to core dump - Don't try to reconfigure VAS when it's disabled Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and Russell Currey. * tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled powerpc: Don't try to copy PPR for task with NULL pt_regs powerpc/64s: Fix __pte_needs_flush() false positive warning
2023-03-30powerpc: Use of_property_read_bool() for boolean propertiesRob Herring2-2/+2
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-30powerpc: Use of_property_present() for testing DT property presenceRob Herring1-4/+4
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <[email protected]> [mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-30powerpc/rtas: lockdep annotationsNathan Lynch1-10/+23
Add lockdep annotations for the following properties that must hold: * Any error log retrieval must be atomically coupled with the prior RTAS call, without a window for another RTAS call to occur before the error log can be retrieved. * All users of the core rtas_args parameter block must hold rtas_lock. Move the definitions of rtas_lock and rtas_args up in the file so that __do_enter_rtas_trace() can refer to them. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-30powerpc/rtas: fix miswording in rtas_function kerneldocNathan Lynch1-1/+1
The 'filter' member is a pointer, not a bool; fix the wording accordingly. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-30powerpc/rtas: rtas_call_unlocked() kerneldocNathan Lynch1-0/+17
Add documentation for rtas_call_unlocked(), including details on how it differs from rtas_call(). Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-30powerpc/rtas: use memmove for potentially overlapping buffer copyNathan Lynch1-1/+1
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which can happen during boot before slab is up. Full context which may not be obvious from the diff: if (altbuf) { buf = altbuf; } else { buf = rtas_err_buf; if (slab_is_available()) buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); } if (buf) memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); This was found by inspection and I'm not aware of it causing problems in practice. It appears to have been introduced by commit 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the old ppc64 version of this code did not have this problem. Use memmove() instead. Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel") Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-28lazy tlb: introduce lazy tlb mm refcount helper functionsNicholas Piggin1-1/+1
Add explicit _lazy_tlb annotated functions for lazy tlb mm refcounting. This makes the lazy tlb mm references more obvious, and allows the refcounting scheme to be modified in later changes. There is no functional change with this patch. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Nicholas Piggin <[email protected]> Acked-by: Linus Torvalds <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nadav Amit <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-03-28powerpc: Don't try to copy PPR for task with NULL pt_regsJens Axboe1-0/+6
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which from my (arguably very short) checking is not commonly done for other archs. This is fine, except when PF_IO_WORKER's have been created and the task does something that causes a coredump to be generated. Then we get this crash: Kernel attempted to read user page (160) - exploit attempt? (uid: 1000) BUG: Kernel NULL pointer dereference on read at 0x00000160 Faulting instruction address: 0xc0000000000c3a60 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0 REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8 ... NIP memcpy_power7+0x200/0x7d0 LR ppr_get+0x64/0xb0 Call Trace: ppr_get+0x40/0xb0 (unreliable) __regset_get+0x180/0x1f0 regset_get_alloc+0x64/0x90 elf_core_dump+0xb98/0x1b60 do_coredump+0x1c34/0x24a0 get_signal+0x71c/0x1410 do_notify_resume+0x140/0x6f0 interrupt_exit_user_prepare_main+0x29c/0x320 interrupt_exit_user_prepare+0x6c/0xa0 interrupt_return_srr_user+0x8/0x138 Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL pt_regs. Check for a valid pt_regs in both ppc_get/ppr_set, and return an error if not set. The actual error value doesn't seem to be important here, so just pick -EINVAL. Fixes: fa439810cc1b ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR") Cc: [email protected] # v4.8+ Signed-off-by: Jens Axboe <[email protected]> [mpe: Trim oops in change log, add Fixes & Cc stable] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-24treewide: Trace IPIs sent via smp_send_reschedule()Valentin Schneider1-2/+4
To be able to trace invocations of smp_send_reschedule(), rename the arch-specific definitions of it to arch_smp_send_reschedule() and wrap it into an smp_send_reschedule() that contains a tracepoint. Changes to include the declaration of the tracepoint were driven by the following coccinelle script: @func_use@ @@ smp_send_reschedule(...); @include@ @@ #include <trace/events/ipi.h> @no_include depends on func_use && !include@ @@ #include <...> + + #include <trace/events/ipi.h> [csky bits] [riscv bits] Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Guo Ren <[email protected]> Acked-by: Palmer Dabbelt <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-23kasan, powerpc: don't rename memintrinsics if compiler adds prefixesMarco Elver1-2/+7
With appropriate compiler support [1], KASAN builds use __asan prefixed meminstrinsics, and KASAN no longer overrides memcpy/memset/memmove. If compiler support is detected (CC_HAS_KASAN_MEMINTRINSIC_PREFIX), define memintrinsics normally (do not prefix '__'). On powerpc, KASAN is the only user of __mem functions, which are used to define instrumented memintrinsics. Alias the normal versions for KASAN to use in its implementation. Link: https://lore.kernel.org/all/[email protected]/ [1] Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Marco Elver <[email protected]> Reported-by: kernel test robot <[email protected]> Acked-by: Michael Ellerman <[email protected]> [powerpc] Cc: Alexander Potapenko <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Daniel Axtens <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Liam R. Howlett <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Vincenzo Frascino <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-03-21vdso: Improve cmd_vdso_check to check all dynamic relocationsFangrui Song1-1/+1
The actual intention is that no dynamic relocation exists in the VDSO. For this the VDSO build validates that the resulting .so file does not have any relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture, which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative relocations too. However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If a port fails to determine the exact .rel[a].dyn size, the trailing zeros become R_*_NONE relocations. E.g. ld's powerpc port recently fixed https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are generally a no-op in the dynamic loaders. So just ignore them. Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting .so file does not contain any R_* relocation entries except R_*_NONE. Signed-off-by: Fangrui Song <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Vincenzo Frascino <[email protected]> # for aarch64 Reviewed-by: Christophe Leroy <[email protected]> Reviewed-by: Vincenzo Frascino <[email protected]> # for vDSO, aarch64 Acked-by: Michael Ellerman <[email protected]> (powerpc) Link: https://lore.kernel.org/r/[email protected]
2023-03-17powerpc/sysfs: move to use bus_get_dev_root()Greg Kroah-Hartman1-2/+12
Direct access to the struct bus_type dev_root pointer is going away soon so replace that with a call to bus_get_dev_root() instead, which is what it is there for. Cc: Michael Ellerman <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Andrew Morton <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-16powerpc: Simplify sysctl registration for powersave_nap_ctl_tableLuis Chamberlain1-9/+1
There is no need to declare an extra tables to just create directory, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-16powerpc: Make generic_calibrate_decr() the defaultChristophe Leroy1-1/+5
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never checked so it must be non null on all platforms. Most platforms define generic_calibrate_decr() as their ppc_md.calibrate_decr(). Have time_init() call generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL, and remove default assignment from all machines. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-15powerpc/machdep: Define 'compatible' property in ppc_md and use itChristophe Leroy1-6/+7
Most probe functions do nothing else than checking whether the machine is compatible to a given string. Define that string in ppc_md structure and check it directly from probe_machine() instead of using ppc_md.probe() for that. Keep checking in ppc_md.probe() only for more complex probing. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-15powerpc: Fix a kernel-doc warningBo Liu1-1/+1
The current code provokes a kernel-doc warnings: arch/powerpc/kernel/process.c:1606: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Signed-off-by: Bo Liu <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2023-03-15powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domainsAlexey Kardashevskiy1-2/+146
Up until now PPC64 managed to avoid using iommu_ops. The VFIO driver uses a SPAPR TCE sub-driver and all iommu_ops uses were kept in the Type1 VFIO driver. Recent development added 2 uses of iommu_ops to the generic VFIO which broke POWER: - a coherency capability check; - blocking IOMMU domain - iommu_group_dma_owner_claimed()/... This adds a simple iommu_ops which reports support for cache coherency and provides a basic support for blocking domains. No other domain types are implemented so the default domain is NULL. Since now iommu_ops controls the group ownership, this takes it out of VFIO. This adds an IOMMU device into a pci_controller (=PHB) and registers it in the IOMMU subsystem, iommu_ops is registered at this point. This setup is done in postcore_initcall_sync. This replaces iommu_group_add_device() with iommu_probe_device() as the former misses necessary steps in connecting PCI devices to IOMMU devices. This adds a comment about why explicit iommu_probe_device() is still needed. The previous discussion is here: https://lore.kernel.org/r/[email protected]/ https://lore.kernel.org/r/[email protected]/ Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence") Fixes: 70693f470848 ("vfio: Set DMA ownership for VFIO devices") Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> Acked-by: Alex Williamson <[email protected]> [mpe: Fix CONFIG_IOMMU_API=n build] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/2000135730.16998523.1678123860135.JavaMail.zimbra@raptorengineeringinc.com
2023-03-14powerpc/pci_64: Init pcibios subsys a bit laterAlexey Kardashevskiy1-1/+1
Subsequent patches are going to add dependency/use of iommu_ops which is initialized in subsys_initcall as well. This moves pciobios_init() to the next initcall level. This should not cause behavioral change. Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/12303156.16998521.1678123842049.JavaMail.zimbra@raptorengineeringinc.com
2023-03-14powerpc/iommu: Add "borrowing" iommu_table_group_opsAlexey Kardashevskiy1-4/+94
PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows for PEs: control the ownership, create/set/unset a table the hardware for dynamic DMA windows (DDW). VFIO uses the API to implement support on POWER. So far only PowerNV IODA2 (POWER8 and newer machines) implemented this and other cases (POWER7 or nested KVM) did not and instead reused existing iommu_table structs. This means 1) no DDW 2) ownership transfer is done directly in the VFIO SPAPR TCE driver. Soon POWER is going to get its own iommu_ops and ownership control is going to move there. This implements spapr_tce_table_group_ops which borrows iommu_table tables. The upside is that VFIO needs to know less about POWER. The new ops returns the existing table from create_table() and only checks if the same window is already set. This is only going to work if the default DMA window starts table_group.tce32_start and as big as pe->table_group.tce32_size (not the case for IODA2+ PowerNV). This changes iommu_table_group_ops::take_ownership() to return an error if borrowing a table failed. This should not cause any visible change in behavior for PowerNV. pSeries was not that well tested/supported anyway. Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> Acked-by: Alex Williamson <[email protected]> [mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
2023-03-09module: replace module_layout with module_memorySong Liu1-4/+3
module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Christophe Leroy <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Reviewed-by: Luis Chamberlain <[email protected]> Signed-off-by: Luis Chamberlain <[email protected]>
2023-03-08sched/idle: Mark arch_cpu_idle_dead() __noreturnJosh Poimboeuf1-1/+1
Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead() return"), in Xen, when a previously offlined CPU was brought back online, it unexpectedly resumed execution where it left off in the middle of the idle loop. There were some hacks to make that work, but the behavior was surprising as do_idle() doesn't expect an offlined CPU to return from the dead (in arch_cpu_idle_dead()). Now that Xen has been fixed, and the arch-specific implementations of arch_cpu_idle_dead() also don't return, give it a __noreturn attribute. This will cause the compiler to complain if an arch-specific implementation might return. It also improves code generation for both caller and callee. Also fixes the following warning: vmlinux.o: warning: objtool: do_idle+0x25f: unreachable instruction Reported-by: Paul E. McKenney <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Link: https://lore.kernel.org/r/60d527353da8c99d4cf13b6473131d46719ed16d.1676358308.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <[email protected]>
2023-03-04Merge tag 'powerpc-6.3-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Drop orphaned VAS MAINTAINERS entry - Fix build errors with clang and KCSAN - Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together with recordmcount Thanks to Nathan Chancellor. * tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Avoid dead code/data elimination when using recordmcount powerpc/vmlinux.lds: Add .text.asan/tsan sections powerpc: Drop orphaned VAS MAINTAINERS entry
2023-02-28powerpc/vmlinux.lds: Add .text.asan/tsan sectionsMichael Ellerman1-0/+1
When KASAN/KCSAN are enabled clang generates .text.asan/tsan sections. Because they are not mentioned in the linker script warnings are generated, and when orphan handling is set to error that becomes a build error, eg: ld.lld: error: vmlinux.a(init/main.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor' ld.lld: error: vmlinux.a(init/version.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor' Fix it by adding the sections to our linker script, similar to the generic change made in 848378812e40 ("vmlinux.lds.h: Handle clang's module.{c,d}tor sections"). Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-26Merge tag 'kbuild-v6.3' of ↵Linus Torvalds2-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Change V=1 option to print both short log and full command log - Allow V=1 and V=2 to be combined as V=12 - Make W=1 detect wrong .gitignore files - Tree-wide cleanups for unused command line arguments passed to Clang - Stop using -Qunused-arguments with Clang - Make scripts/setlocalversion handle only correct release tags instead of any arbitrary annotated tag - Create Debian and RPM source packages without cleaning the source tree - Various cleanups for packaging * tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits) kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install docs: kbuild: remove description of KBUILD_LDS_MODULE .gitattributes: use 'dts' diff driver for *.dtso files kbuild: deb-pkg: improve the usability of source package kbuild: deb-pkg: fix binary-arch and clean in debian/rules kbuild: tar-pkg: use tar rules in scripts/Makefile.package kbuild: make perf-tar*-src-pkg work without relying on git kbuild: deb-pkg: switch over to source format 3.0 (quilt) kbuild: deb-pkg: make .orig tarball a hard link if possible kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile kbuild: srcrpm-pkg: create source package without cleaning kbuild: rpm-pkg: build binary packages from source rpm kbuild: deb-pkg: create source package without cleaning kbuild: add a tool to list files ignored by git Documentation/llvm: add Chimera Linux, Google and Meta datacenters setlocalversion: use only the correct release tag for git-describe setlocalversion: clean up the construction of version output .gitignore: ignore *.cover and *.mbx kbuild: remove --include-dir MAKEFLAG from top Makefile kbuild: fix trivial typo in comment ...
2023-02-25Merge tag 'powerpc-6.3-1' of ↵Linus Torvalds24-429/+1168
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for configuring secure boot with user-defined keys on PowerVM LPARs - Simplify the replay of soft-masked IRQs by making it non-recursive - Add support for KCSAN on 64-bit Book3S - Improvements to the API & code which interacts with RTAS (pseries firmware) - Change 32-bit powermac to assign PCI bus numbers per domain by default - Some improvements to the 32-bit BPF JIT - Various other small features and fixes Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar Kuppusamy. * tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits) powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot powerpc/e500: Add missing prototype for 'relocate_init' powerpc/64: Fix unannotated intra-function call warning powerpc/epapr: Don't use wrteei on non booke powerpc: Pass correct CPU reference to assembler powerpc/mm: Rearrange if-else block to avoid clang warning powerpc/nohash: Fix build with llvm-as powerpc/nohash: Fix build error with binutils >= 2.38 powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags macintosh: windfarm: Use unsigned type for 1-bit bitfields powerpc/kexec_file: print error string on usable memory property update failure powerpc/machdep: warn when machine_is() used too early powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500 powerpc/eeh: Set channel state after notifying the drivers selftests/powerpc: Fix incorrect kernel headers search path powerpc/rtas: arch-wide function token lookup conversions powerpc/rtas: introduce rtas_function_token() API powerpc/pseries/lpar: convert to papr_sysparm API powerpc/pseries/hv-24x7: convert to papr_sysparm API ...
2023-02-23Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-20Merge tag 'sched-core-2023-02-20' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Improve the scalability of the CFS bandwidth unthrottling logic with large number of CPUs. - Fix & rework various cpuidle routines, simplify interaction with the generic scheduler code. Add __cpuidle methods as noinstr to objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks. - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query previously issued registrations. - Limit scheduler slice duration to the sysctl_sched_latency period, to improve scheduling granularity with a large number of SCHED_IDLE tasks. - Debuggability enhancement on sys_exit(): warn about disabled IRQs, but also enable them to prevent a cascade of followup problems and repeat warnings. - Fix the rescheduling logic in prio_changed_dl(). - Micro-optimize cpufreq and sched-util methods. - Micro-optimize ttwu_runnable() - Micro-optimize the idle-scanning in update_numa_stats(), select_idle_capacity() and steal_cookie_task(). - Update the RSEQ code & self-tests - Constify various scheduler methods - Remove unused methods - Refine __init tags - Documentation updates - Misc other cleanups, fixes * tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits) sched/rt: pick_next_rt_entity(): check list_entry sched/deadline: Add more reschedule cases to prio_changed_dl() sched/fair: sanitize vruntime of entity being placed sched/fair: Remove capacity inversion detection sched/fair: unlink misfit task from cpu overutilized objtool: mem*() are not uaccess safe cpuidle: Fix poll_idle() noinstr annotation sched/clock: Make local_clock() noinstr sched/clock/x86: Mark sched_clock() noinstr x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read() x86/atomics: Always inline arch_atomic64*() cpuidle: tracing, preempt: Squash _rcuidle tracing cpuidle: tracing: Warn about !rcu_is_watching() cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG cpuidle: drivers: firmware: psci: Dont instrument suspend code KVM: selftests: Fix build of rseq test exit: Detect and fix irq disabled state in oops cpuidle, arm64: Fix the ARM64 cpuidle logic cpuidle: mvebu: Fix duplicate flags assignment sched/fair: Limit sched slice duration ...
2023-02-17powerpc/64: Fix unannotated intra-function call warningSathvika Vasireddy1-1/+2
objtool throws the following warning: arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x6128: unannotated intra-function call Fix the warning by annotating start_initialization_book3s symbol with the SYM_FUNC_START_LOCAL and SYM_FUNC_END macros. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Sathvika Vasireddy <[email protected]> Fixes: 58f24eea5278 ("powerpc/64s: Refactor initialisation after prom") Suggested-by: Josh Poimboeuf <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-17powerpc/epapr: Don't use wrteei on non bookeChristophe Leroy1-0/+6
wrteei is only for booke. Use the standard mfmsr/ori/mtmsr when non booke. Reported-by: Jan-Benedict Glaw <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/b29c7f1727433b003eae050e44072741c8ac223b.1671475543.git.christophe.leroy@csgroup.eu
2023-02-15powerpc/eeh: Set channel state after notifying the driversGanesh Goudar1-2/+2
When a PCI error is encountered 6th time in an hour we set the channel state to perm_failure and notify the driver about the permanent failure. However, after upstream commit 38ddc011478e ("powerpc/eeh: Make permanently failed devices non-actionable"), EEH handler stops calling any routine once the device is marked as permanent failure. This issue can lead to fatal consequences like kernel hang with certain PCI devices. Following log is observed with lpfc driver, with and without this change, Without this change kernel hangs, If PCI error is encountered 6 times for a device in an hour. Without the change EEH: Beginning: 'error_detected(permanent failure)' PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1) PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1) EEH: Finished:'error_detected(permanent failure)' With the change EEH: Beginning: 'error_detected(permanent failure)' EEH: Invoking lpfc->error_detected(permanent failure) EEH: lpfc driver reports: 'disconnect' EEH: Invoking lpfc->error_detected(permanent failure) EEH: lpfc driver reports: 'disconnect' EEH: Finished:'error_detected(permanent failure)' To fix the issue, set channel state to permanent failure after notifying the drivers. Fixes: 38ddc011478e ("powerpc/eeh: Make permanently failed devices non-actionable") Suggested-by: Mahesh Salgaonkar <[email protected]> Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-13powerpc/rtas: arch-wide function token lookup conversionsNathan Lynch6-72/+68
With the tokens for all implemented RTAS functions now available via rtas_function_token(), which is optimal and safe for arbitrary contexts, there is no need to use rtas_token() or cache its result. Most conversions are trivial, but a few are worth describing in more detail: * Error injection token comparisons for lockdown purposes are consolidated into a simple predicate: token_is_restricted_errinjct(). * A couple of special cases in block_rtas_call() do not use rtas_token() but perform string comparisons against names in the function table. These are converted to compare against token values instead, which is logically equivalent but less expensive. * The lookup for the ibm,os-term token can be deferred until needed, instead of caching it at boot to avoid device tree traversal during panic. * Since rtas_function_token() accesses a read-only data structure without taking any locks, xmon's lookup of set-indicator can be performed as needed instead of cached at startup. Signed-off-by: Nathan Lynch <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.