| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The core RTAS support code and its clients perform two types of lookup
for RTAS firmware function information.
First, mapping a known function name to a token. The typical use case
invokes rtas_token() to retrieve the token value to pass to
rtas_call(). rtas_token() relies on of_get_property(), which performs
a linear search of the /rtas node's property list under a lock with
IRQs disabled.
Second, and less common: given a token value, looking up some
information about the function. The primary example is the sys_rtas
filter path, which linearly scans a small table to match the token to
a rtas_filter struct. Another use case to come is RTAS entry/exit
tracepoints, which will require efficient lookup of function names
from token values. Currently there is no general API for this.
We need something much like the existing rtas_filters table, but more
general and organized to facilitate efficient lookups.
Introduce:
* A new rtas_function type, aggregating function name, token,
and filter. Other function characteristics could be added in the
future.
* An array of rtas_function, where each element corresponds to a known
RTAS function. All information in the table is static save the token
values, which are derived from the device tree at boot. The array is
sorted by function name to allow binary search.
* A named constant for each known RTAS function, used to index the
function array. These also will be used in a client-facing API to be
added later.
* An xarray that maps valid tokens to rtas_function objects.
Fold the existing rtas_filter table into the new rtas_function array,
with the appropriate adjustments to block_rtas_call(). Remove
now-redundant fields from struct rtas_filter. Preserve the function of
the CONFIG_CPU_BIG_ENDIAN guard in the current filter table by
introducing a per-function flag that is set for the function entries
related to pseries LPAR migration. These have never had working users
via sys_rtas on ppc64le; see commit de0f7349a0dd ("powerpc/rtas:
prevent suspend-related sys_rtas use on LE").
Convert rtas_token() to use a lockless binary search on the function
table. Fall back to the old behavior for lookups against names that
are not known to be RTAS functions, but issue a warning. rtas_token()
is for function names; it is not a general facility for accessing
arbitrary properties of the /rtas node. All known misuses of
rtas_token() have been converted to more appropriate of_ APIs in
preceding changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-8-26929c8cce78@linux.ibm.com
|
|
Some RTAS functions that have work area parameters impose alignment
requirements on the work area passed to them by the OS. Examples
include:
- ibm,configure-connector
- ibm,update-nodes
- ibm,update-properties
4KB is the greatest alignment required by PAPR for such
buffers. rtas_data_buf used to have a __page_aligned attribute in the
arch/ppc64 days, but that was changed to __cacheline_aligned for
unknown reasons by commit 033ef338b6e0 ("powerpc: Merge rtas.c into
arch/powerpc/kernel"). That works out to 128-byte alignment
on ppc64, which isn't right.
This was found by inspection and I'm not aware of any real problems
caused by this. Either current RTAS implementations don't enforce the
alignment constraints, or rtas_data_buf is always being placed at a
4KB boundary by accident (or both, perhaps).
Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment
appropriate for all users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-6-26929c8cce78@linux.ibm.com
|
|
Some code that runs early in boot calls RTAS functions that can return
-2 or 990x statuses, which mean the caller should retry. An example is
pSeries_cmo_feature_init(), which invokes ibm,get-system-parameter but
treats these benign statuses as errors instead of retrying.
pSeries_cmo_feature_init() and similar code should be made to retry
until they succeed or receive a real error, using the usual pattern:
do {
rc = rtas_call(token, etc...);
} while (rtas_busy_delay(rc));
But rtas_busy_delay() will perform a timed sleep on any 990x
status. This isn't safe so early in boot, before the CPU scheduler and
timer subsystem have initialized.
The -2 RTAS status is much more likely to occur during single-threaded
boot than 990x in practice, at least on PowerVM. This is because -2
usually means that RTAS made progress but exhausted its self-imposed
timeslice, while 990x is associated with concurrent requests from the
OS causing internal contention. Regardless, according to the language
in PAPR, the OS should be prepared to handle either type of status at
any time.
Add a fallback path to rtas_busy_delay() to handle this as safely as
possible, performing a small delay on 990x. Include a counter to
detect retry loops that aren't making progress and bail out. Add __ref
to rtas_busy_delay() since it now conditionally calls an __init
function.
This was found by inspection and I'm not aware of any real
failures. However, the implementation of rtas_busy_delay() before
commit 38f7b7067dae ("powerpc/rtas: rtas_busy_delay() improvements")
was not susceptible to this problem, so let's treat this as a
regression.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 38f7b7067dae ("powerpc/rtas: rtas_busy_delay() improvements")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-1-26929c8cce78@linux.ibm.com
|
|
Before interacting with the PLPKS, we ask the hypervisor to generate a
password for the current boot, which is then required for most further
PLPKS operations.
If we kexec into a new kernel, the new kernel will try and fail to
generate a new password, as the password has already been set.
Pass the password through to the new kernel via the device tree, in
/chosen/ibm,plpks-pw. Check for the presence of this property before
trying to generate a new password - if it exists, use the existing
password and remove it from the device tree.
This only works with the kexec_file_load() syscall, not the older
kexec_load() syscall, however if you're using Secure Boot then you want
to be using kexec_file_load() anyway.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-24-ajd@linux.ibm.com
|
|
If attempting to read the size or data attributes of a non-existent
variable (which will be possible after a later patch to expose the PLPKS
via the secvar interface), don't spam the kernel log with error messages.
Only print errors for return codes that aren't ENOENT.
Reported-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-14-ajd@linux.ibm.com
|
|
Due to sysfs constraints, when writing to a variable, we can only handle
writes of up to PAGE_SIZE.
It's possible that the maximum object size is larger than PAGE_SIZE, in
which case, print a warning on boot so that the user is aware.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-13-ajd@linux.ibm.com
|
|
Currently, the list of variables is populated by calling
secvar_ops->get_next() repeatedly, which is explicitly modelled on the
OPAL API (including the keylen parameter).
For the upcoming PLPKS backend, we have a static list of variable names.
It is messy to fit that into get_next(), so instead, let the backend put
a NULL-terminated array of variable names into secvar_ops->var_names,
which will be used if get_next() is undefined.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-12-ajd@linux.ibm.com
|
|
The forthcoming pseries consumer of the secvar API wants to expose a
number of config variables. Allowing secvar implementations to provide
their own sysfs attributes makes it easy for consumers to expose what
they need to.
This is not being used by the OPAL secvar implementation at present, and
the config directory will not be created if no attributes are set.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-11-ajd@linux.ibm.com
|
|
Remove unnecessary prefixes from error messages in secvar_sysfs_init()
(the file defines pr_fmt, so putting "secvar:" in every message is
unnecessary). Make capitalisation and punctuation more consistent.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-10-ajd@linux.ibm.com
|
|
Currently the max object size is handled in the core secvar code with an
entirely OPAL-specific implementation, so create a new max_size() op and
move the existing implementation into the powernv platform. Should be
no functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-9-ajd@linux.ibm.com
|
|
The code that handles the format string in secvar-sysfs.c is entirely
OPAL specific, so create a new "format" op in secvar_operations to make
the secvar code more generic. No functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-8-ajd@linux.ibm.com
|
|
The secvar format string and object size sysfs files are both ASCII
text, and should use sysfs_emit(). No functional change.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-7-ajd@linux.ibm.com
|
|
The secvar code only supports one consumer at a time.
Multiple consumers aren't possible at this point in time, but we'd want
it to be obvious if it ever could happen.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-6-ajd@linux.ibm.com
|
|
There's no reason for secvar_operations to use uint64_t vs the more
common kernel type u64.
The types are compatible, but they require different printk format
strings which can lead to confusion.
Change all the secvar related routines to use u64.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-5-ajd@linux.ibm.com
|
|
secvar_ops->get_next() returns -ENOENT when there are no more variables
to return, which is expected behaviour.
Fix this by returning 0 if get_next() returns -ENOENT.
This fixes an issue introduced in commit bd5d9c743d38 ("powerpc: expose
secure variables to userspace via sysfs"), but the return code of
secvar_sysfs_load() was never checked so this issue never mattered.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-4-ajd@linux.ibm.com
|
|
Merge our fixes branch to bring in some changes that conflict with
upcoming next content.
|
|
Instrumented memory accesses provided by KCSAN will access core-local
memories (which will save and restore IRQs) as well as restoring IRQs
directly. Avoid recursive instrumentation by applying __no_kcsan
annotation to IRQ restore routines.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
[mpe: Resolve merge conflict with IRQ replay recursion changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-5-rmclure@linux.ibm.com
|
|
In order for KCSAN to increase its likelihood of observing a data race,
it sets a watchpoint on memory accesses and stalls, allowing for
detection of conflicting accesses by other kernel threads or interrupts.
Stalls are implemented by injecting a call to udelay in instrumented code.
To prevent recursive instrumentation, exclude udelay from being instrumented.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-3-rmclure@linux.ibm.com
|
|
Exclude various incompatible compilation units from KCSAN
instrumentation.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-2-rmclure@linux.ibm.com
|
|
allocated
Stack validation in early boot can just bail out of checking alternate
stacks if they are not validated yet. Checking against a NULL stack
could cause NULLish pointer values to be considered valid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-5-npiggin@gmail.com
|
|
The early paca and boot cpuid dance is complicated and currently does
not quite work as expected for boot cpuid != 0 cases.
early_init_devtree() currently allocates the paca_ptrs and boot cpuid
paca, but until that returns and early_setup() calls setup_paca(), this
thread is currently still executing with smp_processor_id() == 0.
One problem this causes is the paca_ptrs[smp_processor_id()] pointer is
poisoned, so valid_emergency_stack() (any backtrace) and any similar
users will crash.
Another is that the hardware id which is set here will not be returned
by get_hard_smp_processor_id(smp_processor_id()), but it would work
correctly for boot_cpuid == 0, which could lead to difficult to
reproduce or find bugs. The hard id does not seem to be used by the rest
of early_init_devtree(), it just looks like all this code might have
been put here to allocate somewhere to store boot CPU hardware id while
scanning the devtree.
Rearrange things so the hwid is put in a global variable like
boot_cpuid, and do all the paca allocation and boot paca setup in the
64-bit early_setup() after we have everything ready to go.
The paca_ptrs[0] re-poisoning code in early_setup does not seem to have
ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid
is not 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com
|
|
powerpc/64 can boot on a non-zero SMP processor id. Initially, the boot
CPU is said to be "assumed to be 0" until early_init_devtree() discovers
the id from the device tree. That is not a good description because the
assumption can be wrong and that has to be handled, the better
description is that 0 is used as a placeholder, and things are fixed
after the real id is discovered.
smp_processor_id() is set to the boot cpuid, but task_cpu(current) is
not, which causes the smp_processor_id() == task_cpu(current) invariant
to be broken until init_idle() in sched_init().
This is quite fragile and could lead to subtle bugs in future. One bug
is that validate_sp_size uses task_cpu() to get the process stack, so
any stack trace from the booting CPU between early_init_devtree()
and sched_init() will have problems. Early on paca_ptrs[0] will be
poisoned, so that can cause machine checks dereferencing that memory
in real mode. Later, validating the current stack pointer against the
idle task of a different secondary will probably cause no stack trace
to be printed.
Fix this by setting thread_info->cpu right after smp_processor_id() is
set to the boot cpuid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix SMP=n build as reported by sfr]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-3-npiggin@gmail.com
|
|
As the earlier comment explains, __secondary_hold_spinloop does not have
to be accessed at its virtual address, slightly simplifying code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-4-npiggin@gmail.com
|
|
Move some basic Book3S initialisation after prom to a function similar
to what Book3E looks like. Book3E returns from this function at the
virtual address mapping, and Book3S will do the same in a later change,
so making them look similar helps with that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-3-npiggin@gmail.com
|
|
That test was introducted in 2006 by
commit 00ae36de49cc ("[POWERPC] Better check in show_instructions").
At that time, there was no BPF progs.
As seen in message of commit 89d21e259a94 ("powerpc/bpf/32: Fix Oops
on tail call tests"), when a page fault occurs in test_bpf.ko for
instance, the code is dumped as XXXXXXXXs. Allthough
__kernel_text_address() checks is_bpf_text_address(), it seems it is
not enough.
Today, show_instructions() uses get_kernel_nofault() to read the code,
so there is no real need for additional verifications.
ARM64 and x86 don't do any additional check before dumping
instructions. Do the same and remove __kernel_text_address()
in show_instructions().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4fd69ef7945518c3e27f96b95046a5c1468d35bf.1675245773.git.christophe.leroy@csgroup.eu
|
|
For all unrecoverable errors we are missing to log the
error, Since machine_check_log_err() is not getting called
for unrecoverable errors. machine_check_log_err() is called
from deferred handler, To run deferred handlers we have to do
irq work raise from the exception handler.
For recoverable errors exception vector code takes care of
running deferred handlers.
For unrecoverable errors raise irq work in save_mce_event(),
So that we log the error from MCE deferred handler.
Log without this change
MCE: CPU27: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU27: PID: 10580 Comm: inject-ra-err NIP: [0000000010000df4]
MCE: CPU27: Initiator CPU
MCE: CPU27: Unknown
Log with this change
MCE: CPU24: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU24: PID: 1589811 Comm: inject-ra-err NIP: [0000000010000e48]
MCE: CPU24: Initiator CPU
MCE: CPU24: Unknown
RTAS: event: 5, Type: Platform Error (224), Severity: 3
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230201095933.129482-1-ganeshgr@linux.ibm.com
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org
|
|
The "pci-OF-bus-map" property was declared deprecated in 2006 [1] and to
the best of everyone's knowledge is not used by anything anymore [2].
The creation of the property was disabled on powermac (arch/powerpc) in
2005 by commit 35499c0195e4 ("powerpc: Merge in 64-bit powermac
support."). But it is still created by default on CHRP.
On powermac the actual map (pci_to_OF_bus_map) is still used by default,
even though the device tree property is not created.
Add an option to enable/disable use of the pci_to_OF_bus_map, and
creation of the property (on CHRP).
Disabling the option allows enabling CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
which allows "normal" bus numbering and more than 256 buses, like 64-bit
and other architectures.
Mark the new option as default n, the intention is that the option and
the code will be removed in a future release.
[1]: https://lore.kernel.org/linuxppc-dev/1148016268.13249.14.camel@localhost.localdomain/
[2]: https://lore.kernel.org/all/575f239205e8635add81c9f902b7d9db7beb83ea.camel@kernel.crashing.org/
Signed-off-by: Pali Rohár <pali@kernel.org>
[mpe: Reword commit & help text, shrink option name, rework to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206113902.1857123-1-mpe@ellerman.id.au
|
|
The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.
Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c.
Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com
|
|
Interrupt entry sets the soft mask to IRQS_ALL_DISABLED to match the
hard irq disabled state. So when should_hard_irq_enable() returns true
because we want PMI interrupts in irq handlers, MSR[EE] is enabled but
PMIs just get soft-masked. Fix this by clearing IRQS_PMI_DISABLED before
enabling MSR[EE].
This also tidies some of the warnings, no need to duplicate them in
both should_hard_irq_enable() and do_hard_irq_enable().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121100156.2824054-1-npiggin@gmail.com
|
|
Interrupt handlers called by soft-pending irq replay code can run
softirqs, softirq replay enables and disables local irqs, which allows
interrupts to come in including soft-masked interrupts, and it can
cause pending irqs to be replayed again. That makes the soft irq replay
state machine and possible races more complicated and fragile than it
needs to be.
Use irq_enter/irq_exit around irq replay to prevent softirqs running
while interrupts are being replayed. Softirqs will now be run at the
irq_exit() call after all the irq replaying is done. This prevents irqs
being replayed while irqs are being replayed, and should hopefully make
things simpler and easier to think about and debug.
A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt
handlers hard-enabling EE while pending irqs are being replayed, because
that causes new pending irqs to arrive which is also a complexity. This
means pending irqs won't be profiled quite so well because perf irqs
can't be taken.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121102618.2824429-1-npiggin@gmail.com
|
|
At the time commit f97bb36f705d ("powerpc/rtas: Turn rtas lock into a
raw spinlock") was written, the spinlock lockup detection code called
__delay(), which will not make progress if the timebase is not
advancing. Since the interprocessor timebase synchronization sequence
for chrp, cell, and some now-unsupported Power models can temporarily
freeze the timebase through an RTAS function (freeze-time-base), the
lock that serializes most RTAS calls was converted to arch_spinlock_t
to prevent kernel hangs in the lockup detection code.
However, commit bc88c10d7e69 ("locking/spinlock/debug: Remove spinlock
lockup detection code") removed that inconvenient property from the
lock debug code several years ago. So now it should be safe to
reintroduce generic locks into the RTAS support code, primarily to
increase lockdep coverage.
Making rtas_lock a spinlock_t would violate lock type nesting rules
because it can be acquired while holding raw locks, e.g. pci_lock and
irq_desc->lock. So convert it to raw_spinlock_t. There's no apparent
reason not to upgrade timebase_lock as well.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-5-nathanl@linux.ibm.com
|
|
Only code internal to the RTAS subsystem needs access to the central
lock and parameter block. Remove these from the globally visible
'rtas' struct and make them file-static in rtas.c.
Some changed lines in rtas_call() lack appropriate spacing around
operators and cause checkpatch errors; fix these as well.
Suggested-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-4-nathanl@linux.ibm.com
|
|
The first symbol exports of RTAS functions and data came with the (now
removed) scanlog driver in 2003:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb
At the time this was applied, EXPORT_SYMBOL_GPL() was very new, and
the exports of rtas_call() etc have remained non-GPL. As new APIs have
been added to the RTAS subsystem, their symbol exports have followed
the convention set by existing code.
However, the historical evidence is that RTAS function exports have been
added over time only to satisfy the needs of in-kernel users, and these
clients must have fairly intimate knowledge of how the APIs work to use
them safely. No out of tree users are known, and future ones seem
unlikely.
Arguably the default for RTAS symbols should have become
EXPORT_SYMBOL_GPL once it was available. Let's make it so now, and
exceptions can be evaluated as needed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-3-nathanl@linux.ibm.com
|
|
Some RTAS symbols are never used by modular code, drop their exports.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127111231.84294-1-mpe@ellerman.id.au
|
|
No modular code needs access to the 'rtas' struct, so remove the
symbol export.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-2-nathanl@linux.ibm.com
|
|
objtool throws the following warning:
arch/powerpc/kernel/head_85xx.o: warning: objtool: .head.text+0x1a6c:
unannotated intra-function call
Fix the warning by annotating KernelSPE symbol with SYM_FUNC_START_LOCAL
and SYM_FUNC_END macros.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230128124138.1066176-1-sv@linux.ibm.com
|
|
When a module with a livepatched function is unloaded and then reloaded,
klp attempts to dynamically re-patch it. On ppc64, that fails with the
following error:
module_64: livepatch_nfsd: Expected nop after call, got e8410018 at e_show+0x60/0x548 [livepatch_nfsd]
livepatch: failed to initialize patch 'livepatch_nfsd' for module 'nfsd' (-8)
livepatch: patch 'livepatch_nfsd' failed for module 'nfsd', refusing to load module 'nfsd'
The error happens because the restore r2 instruction had already
previously been written into the klp module's replacement function when
the original function was patched the first time. So the instruction
wasn't a nop as expected.
When the restore r2 instruction has already been patched in, detect that
and skip the warning and the instruction write.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2f6329ffd9674df6ff57e03edeb2ca54414770ab.1674617130.git.jpoimboe@kernel.org
|
|
restore_r2() returns 1 on success, which is surprising for a non-boolean
function. Change it to return 0 on success and -errno on error to match
kernel coding convention.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/15baf76c271a0ae09f7b8556e50f2b4251e7049d.1674617130.git.jpoimboe@kernel.org
|
|
Although the powerpc linker script mentions .comment in the DISCARD
section, that has never actually caused it to be discarded, because the
earlier ELF_DETAILS macro (previously STABS_DEBUG) explicitly includes
.comment.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro. With binutils < 2.36 that causes the DISCARD directives later in
the script to be applied earlier, causing .comment to actually be
discarded.
It's confusing to explicitly include and discard .comment, and even more
so if the behaviour depends on the toolchain version. So don't discard
.comment in order to maintain the existing behaviour in all cases.
Fixes: 83a092cf95f2 ("powerpc: Link warning for orphan sections")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-3-mpe@ellerman.id.au
|
|
Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).
However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:
ld: warning: discarding dynamic section .rela.init.rodata
Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE
is disabled.
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-2-mpe@ellerman.id.au
|
|
The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.
That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:
'.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
discarded section '.exit.text' of crypto/algboss.o
'.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
discarded section '.exit.text' of drivers/nvdimm/core.o
Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.
1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-1-mpe@ellerman.id.au
|
|
The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
|
|
Because endlessly repeating:
set_memory_ro()
set_memory_x()
is getting tedious.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y1jek64pXOsougmz@hirez.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- A ptrace API cleanup series from Sergey Shtylyov
- Fixes and cleanups for kexec from ye xingchen
- nilfs2 updates from Ryusuke Konishi
- squashfs feature work from Xiaoming Ni: permit configuration of the
filesystem's compression concurrency from the mount command line
- A series from Akinobu Mita which addresses bound checking errors when
writing to debugfs files
- A series from Yang Yingliang to address rapidio memory leaks
- A series from Zheng Yejian to address possible overflow errors in
encode_comp_t()
- And a whole shower of singleton patches all over the place
* tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits)
ipc: fix memory leak in init_mqueue_fs()
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
rapidio: devices: fix missing put_device in mport_cdev_open
kcov: fix spelling typos in comments
hfs: Fix OOB Write in hfs_asc2mac
hfs: fix OOB Read in __hfs_brec_find
relay: fix type mismatch when allocating memory in relay_create_buf()
ocfs2: always read both high and low parts of dinode link count
io-mapping: move some code within the include guarded section
kernel: kcsan: kcsan_test: build without structleak plugin
mailmap: update email for Iskren Chernev
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
rapidio: fix possible UAF when kfifo_alloc() fails
relay: use strscpy() is more robust and safer
cpumask: limit visibility of FORCE_NR_CPUS
acct: fix potential integer overflow in encode_comp_t()
acct: fix accuracy loss for input value of encode_comp_t()
linux/init.h: include <linux/build_bug.h> and <linux/stringify.h>
rapidio: rio: fix possible name leak in rio_register_mport()
rapidio: fix possible name leaks when rio_add_device() fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
|
|
Merge the powerpc objtool support, which we were keeping in a topic
branch in case of any merge conflicts.
|