aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/include
AgeCommit message (Collapse)AuthorFilesLines
2020-09-02powerpc/pseries: explicitly reschedule during drmem_lmb list traversalNathan Lynch1-1/+17
The drmem lmb list can have hundreds of thousands of entries, and unfortunately lookups take the form of linear searches. As long as this is the case, traversals have the potential to monopolize the CPU and provoke lockup reports, workqueue stalls, and the like unless they explicitly yield. Rather than placing cond_resched() calls within various for_each_drmem_lmb() loop blocks in the code, put it in the iteration expression of the loop macro itself so users can't omit it. Introduce a drmem_lmb_next() iteration helper function which calls cond_resched() at a regular interval during array traversal. Each iteration of the loop in DLPAR code paths can involve around ten RTAS calls which can each take up to 250us, so this ensures the check is performed at worst every few milliseconds. Fixes: 6c6ea53725b3 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format") Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-02powerpc: Drop _nmask_and_or_msr()Christophe Leroy1-1/+0
_nmask_and_or_msr() is only used at two places to set MSR_IP. The SYNC is unnecessary as the users are not PowerPC 601. Can be easily writen in C. Do it, and drop _nmask_and_or_msr() Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/c2d2b8dfb8dd677026b26dffc8d31070c38a6b89.1597388079.git.christophe.leroy@csgroup.eu
2020-09-02powerpc/perf: consolidate GPCI hcall structs into asm/hvcall.hScott Cheloha1-0/+36
The H_GetPerformanceCounterInfo (GPCI) hypercall input/output structs are useful to modules outside of perf/, so move them into asm/hvcall.h to live alongside the other powerpc hypercall structs. Leave the perf-specific GPCI stuff in perf/hv-gpci.h. Signed-off-by: Scott Cheloha <[email protected]> Acked-by: Nathan Lynch <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-02powerpc: drop hard_reset_now() and poweroff_now() declarationChristophe Leroy1-2/+0
Those function have never existed. Drop their declaration. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/edcdd72a36495d25213c0256c8022367458e0d19.1596716418.git.christophe.leroy@csgroup.eu
2020-09-02powerpc/fpu: Drop cvt_fd() and cvt_df()Christophe Leroy1-2/+0
Those two functions have been unused since commit identified below. Drop them. Fixes: 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/d5641ada199b8dd2af16ad00a66084cf974f2704.1596716418.git.christophe.leroy@csgroup.eu
2020-09-02powerpc/irq: Drop forward declaration of struct irqactionChristophe Leroy1-1/+0
Since the commit identified below, the forward declaration of struct irqaction is useless. Drop it. Fixes: b709c0832824 ("ppc64: move stack switching up in interrupt processing") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/e0bcdabac45fcd26c02d7df273bd4a5827c6033d.1596716375.git.christophe.leroy@csgroup.eu
2020-09-02powerpc/hwirq: Remove stale forward irq_chip declarationChristophe Leroy1-6/+0
Since commit identified below, the forward declaration of struct irq_chip is useless (was struct hw_interrupt_type at that time) Remove it, together with the associated comment. Fixes: c0ad90a32fb6 ("[PATCH] genirq: add ->retrigger() irq op to consolidate hw_irq_resend()") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/fbe58d27cf128d5fe581e4510ded8701858f268e.1596716328.git.christophe.leroy@csgroup.eu
2020-08-30Merge tag 'locking-urgent-2020-08-30' of ↵Linus Torvalds1-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of fixes for lockdep, tracing and RCU: - Prevent recursion by using raw_cpu_* operations - Fixup the interrupt state in the cpu idle code to be consistent - Push rcu_idle_enter/exit() invocations deeper into the idle path so that the lock operations are inside the RCU watching sections - Move trace_cpu_idle() into generic code so it's called before RCU goes idle. - Handle raw_local_irq* vs. local_irq* operations correctly - Move the tracepoints out from under the lockdep recursion handling which turned out to be fragile and inconsistent" * tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep,trace: Expose tracepoints lockdep: Only trace IRQ edges mips: Implement arch_irqs_disabled() arm64: Implement arch_irqs_disabled() nds32: Implement arch_irqs_disabled() locking/lockdep: Cleanup x86/entry: Remove unused THUNKs cpuidle: Move trace_cpu_idle() into generic code cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic sched,idle,rcu: Push rcu_idle deeper into the idle path cpuidle: Fixup IRQ state lockdep: Use raw_cpu_*() for per-cpu variables
2020-08-30Merge tag 'powerpc-5.9-4' of ↵Linus Torvalds5-15/+38
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Revert our removal of PROT_SAO, at least one user expressed an interest in using it on Power9. Instead don't allow it to be used in guests unless enabled explicitly at compile time. - A fix for a crash introduced by a recent change to FP handling. - Revert a change to our idle code that left Power10 with no idle support. - One minor fix for the new scv system call path to set PPR. - Fix a crash in our "generic" PMU if branch stack events were enabled. - A fix for the IMC PMU, to correctly identify host kernel samples. - The ADB_PMU powermac code was found to be incompatible with VMAP_STACK, so make them incompatible in Kconfig until the code can be fixed. - A build fix in drivers/video/fbdev/controlfb.c, and a documentation fix. Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy, Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin, Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan Srinivasan. * tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check" powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc powerpc/perf: Fix crashes with generic_compat_pmu & BHRB powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode powerpc/64s: scv entry should set PPR Documentation/powerpc: fix malformed table in syscall64-abi video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n selftests/powerpc: Update PROT_SAO test to skip ISA 3.1 powerpc/64s: Disallow PROT_SAO in LPARs by default Revert "powerpc/64s: Remove PROT_SAO support"
2020-08-28powerpc/book3s64/radix: Fix boot failure with large amount of guest memoryAneesh Kumar K.V1-5/+5
If the hypervisor doesn't support hugepages, the kernel ends up allocating a large number of page table pages. The early page table allocation was wrongly setting the max memblock limit to ppc64_rma_size with radix translation which resulted in boot failure as shown below. Kernel panic - not syncing: early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2 Call Trace: [c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable) [c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418 [c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec [c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4 [c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c [c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170 This was because the kernel was checking for the radix feature before we enable the feature via mmu_features. This resulted in the kernel using hash restrictions on radix. Rework the early init code such that the kernel boot with memblock restrictions as imposed by hash. At that point, the kernel still hasn't finalized the translation the kernel will end up using. We have three different ways of detecting radix. 1. dt_cpu_ftrs_scan -> used only in case of PowerNV 2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan 3. CAS -> Where we negotiate with hypervisor about the supported translation. We look at 1 or 2 early in the boot and after that, we look at the CAS vector to finalize the translation the kernel will use. We also support a kernel command line option (disable_radix) to switch to hash. Update the memblock limit after mmu_early_init_devtree() if the kernel is going to use radix translation. This forces some of the memblock allocations we do before mmu_early_init_devtree() to be within the RMA limit. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Reported-by: Shirisha Ganta <[email protected]> Signed-off-by: Aneesh Kumar K.V <[email protected]> Reviewed-by: Hari Bathini <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-26lockdep: Only trace IRQ edgesNicholas Piggin1-7/+4
Problem: raw_local_irq_save(); // software state on local_irq_save(); // software state off ... local_irq_restore(); // software state still off, because we don't enable IRQs raw_local_irq_restore(); // software state still off, *whoopsie* existing instances: - lock_acquire() raw_local_irq_save() __lock_acquire() arch_spin_lock(&graph_lock) pv_wait() := kvm_wait() (same or worse for Xen/HyperV) local_irq_save() - trace_clock_global() raw_local_irq_save() arch_spin_lock() pv_wait() := kvm_wait() local_irq_save() - apic_retrigger_irq() raw_local_irq_save() apic->send_IPI() := default_send_IPI_single_phys() local_irq_save() Possible solutions: A) make it work by enabling the tracing inside raw_*() B) make it work by keeping tracing disabled inside raw_*() C) call it broken and clean it up now Now, given that the only reason to use the raw_* variant is because you don't want tracing. Therefore A) seems like a weird option (although it can be done). C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just because there is one raw user, this strips the validation/tracing off for all the other users. So we pick B) and declare any code that ends up doing: raw_local_irq_save() local_irq_save() lockdep_assert_irqs_disabled(); broken. AFAICT this problem has existed forever, the only reason it came up is because commit: 859d069ee1dd ("lockdep: Prepare for NMI IRQ state tracking") changed IRQ tracing vs lockdep recursion and the first instance is fairly common, the other cases hardly ever happen. Signed-off-by: Nicholas Piggin <[email protected]> [rewrote changelog] Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Tested-by: Marco Elver <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-08-25powerpc/nx: Don't pack struct coprocessor_request_blockOliver O'Halloran1-2/+4
Building with W=1 results in the following warning: In file included from arch/powerpc/platforms/powernv/vas-fault.c:16: ./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned] 159 | } __packed; | ^ ./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned] ./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned] ./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned] cc1: all warnings being treated as errors This happens because coprocessor_request_block includes several sub-structures with an alignment specified using the __aligned(XX) attribute. The problem comes from coprocessor_request_block having the __packed attribute. Packing the structure causes the preferred alignment of the nested structures to be ignored and we get the warnings as a result. This isn't a problem in practice since the struct is defined with explicit padding in the form of reserved fields, but we'd like to get rid of the spurious warnings. The simplest solution is to remove the packed attribute and use a BUILD_BUG_ON() to ensure the struct is the correct (expected by HW) size compile time. Also add a __aligned(128) to the request block structure since Book4 for P8 suggests the HW requires it to be aligned to a 128 byte boundary. There's a similar requirement for P9 since the COPY and PASTE instructions used to invoke VAS/NX accelerators operates on a cache line boundary. Signed-off-by: Oliver O'Halloran <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-25ocxl: Remove custom service to allocate interruptsFrederic Barrat1-3/+0
We now allocate interrupts through xive directly. Signed-off-by: Frederic Barrat <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-24powerpc/64s: Disallow PROT_SAO in LPARs by defaultShawn Anastasio1-2/+7
Since migration of guests using SAO to ISA 3.1 hosts may cause issues, disable PROT_SAO in LPARs by default and introduce a new Kconfig option PPC_PROT_SAO_LPAR to allow users to enable it if desired. Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-24Revert "powerpc/64s: Remove PROT_SAO support"Shawn Anastasio5-15/+33
This reverts commit 5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05. Since PROT_SAO can still be useful for certain classes of software, reintroduce it. Concerns about guest migration for LPARs using SAO will be addressed next. Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-23Merge tag 'powerpc-5.9-3' of ↵Linus Torvalds7-3/+48
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
2020-08-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+2
Pull kvm fixes from Paolo Bonzini: - PAE and PKU bugfixes for x86 - selftests fix for new binutils - MMU notifier fix for arm64 * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set KVM: Pass MMU notifier range flags to kvm_unmap_hva_range() kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode KVM: x86: fix access code passed to gva_to_gpa selftests: kvm: Use a shorter encoding to clear RAX
2020-08-21KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()Will Deacon1-1/+2
The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Suzuki K Poulose <[email protected]> Cc: James Morse <[email protected]> Signed-off-by: Will Deacon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-08-20ppc: propagate the calling conventions change down to ↵Al Viro1-4/+2
csum_partial_copy_generic() ... and get rid of the pointless fallback in the wrappers. On error it used to zero the unwritten area and calculate the csum of the entire thing. Not wanting to do it in assembler part had been very reasonable; doing that in the first place, OTOH... In case of an error the caller discards the data we'd copied, along with whatever checksum it might've had. Signed-off-by: Al Viro <[email protected]>
2020-08-20saner calling conventions for csum_and_copy_..._user()Al Viro1-2/+2
All callers of these primitives will * discard anything we might've copied in case of error * ignore the csum value in case of error * always pass 0xffffffff as the initial sum, so the resulting csum value (in case of success, that is) will never be 0. That suggest the following calling conventions: * don't pass err_ptr - just return 0 on error. * don't bother with zeroing destination, etc. in case of error * don't pass the initial sum - just use 0xffffffff. This commit does the minimal conversion in the instances of csum_and_copy_...(); the changes of actual asm code behind them are done later in the series. Note that this asm code is often shared with csum_partial_copy_nocheck(); the difference is that csum_partial_copy_nocheck() passes 0 for initial sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are free to pass 0xffffffff in all cases and subsequent patches will use that freedom without any special comments. A part that could be split off: parisc and uml/i386 claimed to have csum_and_copy_to_user() instances of their own, but those were identical to the generic one, so we simply drop them. Not sure if it's worth a separate commit... Signed-off-by: Al Viro <[email protected]>
2020-08-20csum_partial_copy_nocheck(): drop the last argumentAl Viro1-2/+2
It's always 0. Note that we theoretically could use ~0U as well - result will be the same modulo 0xffff, _if_ the damn thing did the right thing for any value of initial sum; later we'll make use of that when convenient. However, unlike csum_and_copy_..._user(), there are instances that did not work for arbitrary initial sums; c6x is one such. Signed-off-by: Al Viro <[email protected]>
2020-08-20unify generic instances of csum_partial_copy_nocheck()Al Viro1-0/+1
quite a few architectures have the same csum_partial_copy_nocheck() - simply memcpy() the data and then return the csum of the copy. hexagon, parisc, ia64, s390, um: explicitly spelled out that way. arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32, nios2, openrisc, riscv, unicore32: end up picking the same thing spelled out in lib/checksum.h (with varying amounts of perversions along the way). everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc, sh, sparc, x86, xtensa) have non-generic variants. For all except c6x the declaration is in their asm/checksum.h. c6x uses the wrapper from asm-generic/checksum.h that would normally lead to the lib/checksum.h instance, but in case of c6x we end up using an asm function from arch/c6x instead. Screw that mess - have architectures with private instances define _HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY *not* defined. Signed-off-by: Al Viro <[email protected]>
2020-08-18powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32Christophe Leroy1-1/+8
On BOOK3S_32, when we have modules and strict kernel RWX, modules are not in vmalloc space but in a dedicated segment that is below PAGE_OFFSET. So KASAN_SHADOW_START must take it into account. MODULES_VADDR can't be used because it is not defined yet in kasan.h Fixes: 6ca055322da8 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/6eddca2d5611fd57312a88eae31278c87a8fc99d.1596641224.git.christophe.leroy@csgroup.eu
2020-08-17powerpc/fixmap: Fix the size of the early debug areaChristophe Leroy1-1/+1
Commit ("03fd42d458fb powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") reworked the setup of the early debug area and mistakenly replaced 128 * 1024 by SZ_128. Change to SZ_128K to restore the original 128 kbytes size of the area. Fixes: 03fd42d458fb ("powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/996184974d674ff984643778cf1cdd7fe58cc065.1597644194.git.christophe.leroy@csgroup.eu
2020-08-17powerpc/kernel: Cleanup machine check function declarationsMadhavan Srinivasan2-0/+12
__machine_check_early_realmode_p*() are currently declared as extern in cputable.c and because of this when compiled with "C=1" (which enables semantic checker) produces these warnings. CHECK arch/powerpc/kernel/mce_power.c arch/powerpc/kernel/mce_power.c:709:6: warning: symbol '__machine_check_early_realmode_p7' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:717:6: warning: symbol '__machine_check_early_realmode_p8' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:722:6: warning: symbol '__machine_check_early_realmode_p9' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:740:6: warning: symbol '__machine_check_early_realmode_p10' was not declared. Should it be static? Patch here moves the declaration to asm/mce.h and includes the same in cputable.c Fixes: ae744f3432d3 ("powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8") Fixes: 7b9f71f974a1 ("powerpc/64s: POWER9 machine check handler") Signed-off-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17powerpc/perf: Add extended regs support for power10 platformAthira Rajeev1-0/+6
Include capability flag PERF_PMU_CAP_EXTENDED_REGS for power10 and expose MMCR3, SIER2, SIER3 registers as part of extended regs. Also introduce PERF_REG_PMU_MASK_31 to define extended mask value at runtime for power10. Suggested-by: Ryan Grimm <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Tested-by: Nageswara R Sastry <[email protected]> Reviewed-by: Kajol Jain <[email protected]> Reviewed-and-tested-by: Ravi Bangoria <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17powerpc/perf: Add support for outputting extended regs in perf intr_regsAnju T Sudhakar3-1/+21
Add support for perf extended register capability in powerpc. The capability flag PERF_PMU_CAP_EXTENDED_REGS, is used to indicate the PMU which support extended registers. The generic code define the mask of extended registers as 0 for non supported architectures. Patch adds extended regs support for power9 platform by exposing MMCR0, MMCR1 and MMCR2 registers. REG_RESERVED mask needs update to include extended regs. PERF_REG_EXTENDED_MASK, contains mask value of the supported registers, is defined at runtime in the kernel based on platform since the supported registers may differ from one processor version to another and hence the MASK value. With the patch: available registers: r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 r26 r27 r28 r29 r30 r31 nip msr orig_r3 ctr link xer ccr softe trap dar dsisr sier mmcra mmcr0 mmcr1 mmcr2 PERF_RECORD_SAMPLE(IP, 0x1): 4784/4784: 0 period: 1 addr: 0 ... intr regs: mask 0xffffffffffff ABI 64-bit .... r0 0xc00000000012b77c .... r1 0xc000003fe5e03930 .... r2 0xc000000001b0e000 .... r3 0xc000003fdcddf800 .... r4 0xc000003fc7880000 .... r5 0x9c422724be .... r6 0xc000003fe5e03908 .... r7 0xffffff63bddc8706 .... r8 0x9e4 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0xc0000000001299c0 .... r13 0xc000003ffffc4800 .... r14 0x0 .... r15 0x7fffdd8b8b00 .... r16 0x0 .... r17 0x7fffdd8be6b8 .... r18 0x7e7076607730 .... r19 0x2f .... r20 0xc00000001fc26c68 .... r21 0xc0002041e4227e00 .... r22 0xc00000002018fb60 .... r23 0x1 .... r24 0xc000003ffec4d900 .... r25 0x80000000 .... r26 0x0 .... r27 0x1 .... r28 0x1 .... r29 0xc000000001be1260 .... r30 0x6008010 .... r31 0xc000003ffebb7218 .... nip 0xc00000000012b910 .... msr 0x9000000000009033 .... orig_r3 0xc00000000012b86c .... ctr 0xc0000000001299c0 .... link 0xc00000000012b77c .... xer 0x0 .... ccr 0x28002222 .... softe 0x1 .... trap 0xf00 .... dar 0x0 .... dsisr 0x80000000000 .... sier 0x0 .... mmcra 0x80000000000 .... mmcr0 0x82008090 .... mmcr1 0x1e000000 .... mmcr2 0x0 ... thread: perf:4784 Signed-off-by: Anju T Sudhakar <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Tested-by: Nageswara R Sastry <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> Reviewed-by: Kajol Jain <[email protected]> Reviewed-and-tested-by: Ravi Bangoria <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-2/+18
Pull more KVM updates from Paolo Bonzini: "PPC: - Improvements and bugfixes for secure VM support, giving reduced startup time and memory hotplug support. - Locking fixes in nested KVM code - Increase number of guests supported by HV KVM to 4094 - Preliminary POWER10 support ARM: - Split the VHE and nVHE hypervisor code bases, build the EL2 code separately, allowing for the VHE code to now be built with instrumentation - Level-based TLB invalidation support - Restructure of the vcpu register storage to accomodate the NV code - Pointer Authentication available for guests on nVHE hosts - Simplification of the system register table parsing - MMU cleanups and fixes - A number of post-32bit cleanups and other fixes MIPS: - compilation fixes x86: - bugfixes - support for the SERIALIZE instruction" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits) KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanup x86/kvm/hyper-v: Synic default SCONTROL MSR needs to be enabled MIPS: KVM: Convert a fallthrough comment to fallthrough MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64 x86: Expose SERIALIZE for supported cpuid KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabled KVM: arm64: Move S1PTW S2 fault logic out of io_mem_abort() KVM: arm64: Don't skip cache maintenance for read-only memslots KVM: arm64: Handle data and instruction external aborts the same way KVM: arm64: Rename kvm_vcpu_dabt_isextabt() KVM: arm: Add trace name for ARM_NISV KVM: arm64: Ensure that all nVHE hyp code is in .hyp.text KVM: arm64: Substitute RANDOMIZE_BASE for HARDEN_EL2_VECTORS KVM: arm64: Make nVHE ASLR conditional on RANDOMIZE_BASE KVM: PPC: Book3S HV: Rework secure mem slot dropping KVM: PPC: Book3S HV: Move kvmppc_svm_page_out up KVM: PPC: Book3S HV: Migrate hot plugged memory KVM: PPC: Book3S HV: In H_SVM_INIT_DONE, migrate remaining normal-GFNs to secure-GFNs KVM: PPC: Book3S HV: Track the state GFNs associated with secure VMs KVM: PPC: Book3S HV: Disable page merging in H_SVM_INIT_START ...
2020-08-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+1
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <[email protected]>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ...
2020-08-12uaccess: remove segment_eqChristoph Hellwig1-2/+1
segment_eq is only used to implement uaccess_kernel. Just open code uaccess_kernel in the arch uaccess headers and remove one layer of indirection. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Linus Torvalds <[email protected]> Acked-by: Greentime Hu <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Cc: Nick Hu <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Palmer Dabbelt <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-08-11Merge tag 'iommu-updates-v5.9' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Remove of the dev->archdata.iommu (or similar) pointers from most architectures. Only Sparc is left, but this is private to Sparc as their drivers don't use the IOMMU-API. - ARM-SMMU updates from Will Deacon: - Support for SMMU-500 implementation in Marvell Armada-AP806 SoC - Support for SMMU-500 implementation in NVIDIA Tegra194 SoC - DT compatible string updates - Remove unused IOMMU_SYS_CACHE_ONLY flag - Move ARM-SMMU drivers into their own subdirectory - Intel VT-d updates from Lu Baolu: - Misc tweaks and fixes for vSVA - Report/response page request events - Cleanups - Move the Kconfig and Makefile bits for the AMD and Intel drivers into their respective subdirectory. - MT6779 IOMMU Support - Support for new chipsets in the Renesas IOMMU driver - Other misc cleanups and fixes (e.g. to improve compile test coverage) * tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits) iommu/amd: Move Kconfig and Makefile bits down into amd directory iommu/vt-d: Move Kconfig and Makefile bits down into intel directory iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu iommu: Add gfp parameter to io_pgtable_ops->map() iommu: Mark __iommu_map_sg() as static iommu/vt-d: Rename intel-pasid.h to pasid.h iommu/vt-d: Add page response ops support iommu/vt-d: Report page request faults for guest SVA iommu/vt-d: Add a helper to get svm and sdev for pasid iommu/vt-d: Refactor device_to_iommu() helper iommu/vt-d: Disable multiple GPASID-dev bind iommu/vt-d: Warn on out-of-range invalidation address iommu/vt-d: Fix devTLB flush for vSVA iommu/vt-d: Handle non-page aligned address iommu/vt-d: Fix PASID devTLB invalidation iommu/vt-d: Remove global page support in devTLB flush iommu/vt-d: Enforce PASID devTLB field mask iommu: Make some functions static iommu/amd: Remove double zero check ...
2020-08-09Merge tag 'kvm-ppc-next-5.9-1' of ↵Paolo Bonzini3-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next-5.6 PPC KVM update for 5.9 - Improvements and bug-fixes for secure VM support, giving reduced startup time and memory hotplug support. - Locking fixes in nested KVM code - Increase number of guests supported by HV KVM to 4094 - Preliminary POWER10 support
2020-08-07Merge branch 'work.fdpic' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fdpick coredump update from Al Viro: "Switches fdpic coredumps away from original aout dumping primitives to the same kind of regset use as regular elf coredumps do" * 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [elf-fdpic] switch coredump to regsets [elf-fdpic] use elf_dump_thread_status() for the dumper thread as well [elf-fdpic] move allocation of elf_thread_status into elf_dump_thread_status() [elf-fdpic] coredump: don't bother with cyclic list for per-thread objects kill elf_fpxregs_t take fdpic-related parts of elf_prstatus out unexport linux/elfcore.h
2020-08-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+0
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <[email protected]>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...
2020-08-07mm: remove unneeded includes of <asm/pgalloc.h>Mike Rapoport1-1/+0
Patch series "mm: cleanup usage of <asm/pgalloc.h>" Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in <asm-generic/pgalloc.h> and enable use of the generic functions where appropriate. In addition, functions declared and defined in <asm/pgalloc.h> headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the <asm/pgalloc.h> included all over the place. The first patch in this series removes unneeded includes of <asm/pgalloc.h> In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases <asm/pgalloc.h> header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in <asm/pgalloc.h> and do not require that header. As for the other header files that used to include <asm/pgalloc.h>, it is possible to move that include into the .c file that actually uses symbols from <asm/pgalloc.h> and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [[email protected]: fix powerpc warning] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Pekka Enberg <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> [m68k] Cc: Abdul Haleem <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Max Filippov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Satheesh Rajendran <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Stephen Rothwell <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Matthew Wilcox <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-08-07Merge tag 'powerpc-5.9-1' of ↵Linus Torvalds86-946/+1522
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for (optionally) using queued spinlocks & rwlocks. - Support for a new faster system call ABI using the scv instruction on Power9 or later. - Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on Power10 and future processors, leaving us with no way to implement the functionality it requests. This risks breaking userspace, though we believe it is unused in practice. - A bug fix for, and then the removal of, our custom stack expansion checking. We now allow stack expansion up to the rlimit, like other architectures. - Remove the remnants of our (previously disabled) topology update code, which tried to react to NUMA layout changes on virtualised systems, but was prone to crashes and other problems. - Add PMU support for Power10 CPUs. - A change to our signal trampoline so that we don't unbalance the link stack (branch return predictor) in the signal delivery path. - Lots of other cleanups, refactorings, smaller features and so on as usual. Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong, YueHaibing. * tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits) selftests/powerpc: Fix pkey syscall redefinitions powerpc: Fix circular dependency between percpu.h and mmu.h powerpc/powernv/sriov: Fix use of uninitialised variable selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs powerpc/40x: Fix assembler warning about r0 powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric powerpc/papr_scm: Fetch nvdimm performance stats from PHYP cpuidle: pseries: Fixup exit latency for CEDE(0) cpuidle: pseries: Add function to parse extended CEDE records cpuidle: pseries: Set the latency-hint before entering CEDE selftests/powerpc: Fix online CPU selection powerpc/perf: Consolidate perf_callchain_user_[64|32]() powerpc/pseries/hotplug-cpu: Remove double free in error path powerpc/pseries/mobility: Add pr_debug() for device tree changes powerpc/pseries/mobility: Set pr_fmt() powerpc/cacheinfo: Warn if cache object chain becomes unordered powerpc/cacheinfo: Improve diagnostics about malformed cache lists powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages powerpc/cacheinfo: Set pr_fmt() powerpc: fix function annotations to avoid section mismatch warnings with gcc-10 ...
2020-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
Pull KVM updates from Paolo Bonzini: "s390: - implement diag318 x86: - Report last CPU for debugging - Emulate smaller MAXPHYADDR in the guest than in the host - .noinstr and tracing fixes from Thomas - nested SVM page table switching optimization and fixes Generic: - Unify shadow MMU cache data structures across architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) KVM: SVM: Fix sev_pin_memory() error handling KVM: LAPIC: Set the TDCR settable bits KVM: x86: Specify max TDP level via kvm_configure_mmu() KVM: x86/mmu: Rename max_page_level to max_huge_page_level KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch KVM: x86: Pull the PGD's level from the MMU instead of recalculating it KVM: VMX: Make vmx_load_mmu_pgd() static KVM: x86/mmu: Add separate helper for shadow NPT root page role calc KVM: VMX: Drop a duplicate declaration of construct_eptp() KVM: nSVM: Correctly set the shadow NPT root level in its MMU role KVM: Using macros instead of magic values MIPS: KVM: Fix build error caused by 'kvm_run' cleanup KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support KVM: VMX: optimize #PF injection when MAXPHYADDR does not match KVM: VMX: Add guest physical address check in EPT violation and misconfig KVM: VMX: introduce vmx_need_pf_intercept KVM: x86: update exception bitmap on CPUID changes KVM: x86: rename update_bp_intercept to update_exception_bitmap ...
2020-08-04Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-5/+0
Pull dma-mapping updates from Christoph Hellwig: - make support for dma_ops optional - move more code out of line - add generic support for a dma_ops bypass mode - misc cleanups * tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping: dma-contiguous: cleanup dma_alloc_contiguous dma-debug: use named initializers for dir2name powerpc: use the generic dma_ops_bypass mode dma-mapping: add a dma_ops_bypass flag to struct device dma-mapping: make support for dma ops optional dma-mapping: inline the fast path dma-direct calls dma-mapping: move the remaining DMA API calls out of line
2020-08-04powerpc: Fix circular dependency between percpu.h and mmu.hMichael Ellerman1-2/+2
Recently random.h started including percpu.h (see commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity")), which broke corenet64_smp_defconfig: In file included from /linux/arch/powerpc/include/asm/paca.h:18, from /linux/arch/powerpc/include/asm/percpu.h:13, from /linux/include/linux/random.h:14, from /linux/lib/uuid.c:14: /linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx' 139 | DECLARE_PER_CPU(int, next_tlbcam_idx); This is due to a circular header dependency: asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which includes asm/mmu.h Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it. We can fix it by moving the include of paca.h below the include of asm-generic/percpu.h. This moves the include of paca.h out of the #ifdef __powerpc64__, but that is OK because paca.h is almost entirely inside #ifdef CONFIG_PPC64 anyway. It also moves the include of paca.h out of the #ifdef CONFIG_SMP, which could possibly break something, but seems to have no ill effects. Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Cc: [email protected] # v5.8 Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-07-31powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metricVaibhav Jain1-0/+9
We add support for reporting 'fuel-gauge' NVDIMM metric via PAPR_PDSM_HEALTH pdsm payload. 'fuel-gauge' metric indicates the usage life remaining of a papr-scm compatible NVDIMM. PHYP exposes this metric via the H_SCM_PERFORMANCE_STATS. The metric value is returned from the pdsm by extending the return payload 'struct nd_papr_pdsm_health' without breaking the ABI. A new field 'dimm_fuel_gauge' to hold the metric value is introduced at the end of the payload struct and its presence is indicated by by extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID. The patch introduces a new function papr_pdsm_fuel_gauge() that is called from papr_pdsm_health(). If fetching NVDIMM performance stats is supported then 'papr_pdsm_fuel_gauge()' allocated an output buffer large enough to hold the performance stat and passes it to drc_pmem_query_stats() that issues the HCALL to PHYP. The return value of the stat is then populated in the 'struct nd_papr_pdsm_health.dimm_fuel_gauge' field with extension flag 'PDSM_DIMM_HEALTH_RUN_GAUGE_VALID' set in 'struct nd_papr_pdsm_health.extension_flags' Signed-off-by: Vaibhav Jain <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-07-29Merge branch 'locking/header'Peter Zijlstra1-2/+0
2020-07-29locking/atomic: Move ATOMIC_INIT into linux/types.hHerbert Xu1-2/+0
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h. This allows users of atomic_t to use ATOMIC_INIT without having to include atomic.h as that way may lead to header loops. Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Waiman Long <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-07-29powerpc/kexec_file: Prepare elfcore header for crashing kernelHari Bathini1-0/+6
Prepare elf headers for the crashing kernel's core file using crash_prepare_elf64_headers() and pass on this info to kdump kernel by updating its command line with elfcorehdr parameter. Also, add elfcorehdr location to reserve map to avoid it from being stomped on while booting. Signed-off-by: Hari Bathini <[email protected]> Tested-by: Pingfan Liu <[email protected]> Reviewed-by: Thiago Jung Bauermann <[email protected]> [mpe: Ensure cmdline is nul terminated] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/159602298855.575379.15819225623219909517.stgit@hbathini
2020-07-29powerpc/kexec_file: Setup backup region for kdump kernelHari Bathini2-0/+26
Though kdump kernel boots from loaded address, the first 64KB of it is copied down to real 0. So, setup a backup region and let purgatory copy the first 64KB of crashed kernel into this backup region before booting into kdump kernel. Update reserve map with backup region and crashed kernel's memory to avoid kdump kernel from accidentially using that memory. Signed-off-by: Hari Bathini <[email protected]> Reviewed-by: Thiago Jung Bauermann <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/159602294718.575379.16216507537038008623.stgit@hbathini
2020-07-29powerpc/drmem: Make LMB walk a bit more flexibleHari Bathini1-4/+5
Currently, numa & prom are the only users of drmem LMB walk code. Loading kdump with kexec_file also needs to walk the drmem LMBs to setup the usable memory ranges for kdump kernel. But there are couple of issues in using the code as is. One, walk_drmem_lmb() code is built into the .init section currently, while kexec_file needs it later. Two, there is no scope to pass data to the callback function for processing and/or erroring out on certain conditions. Fix that by, moving drmem LMB walk code out of .init section, adding scope to pass data to the callback function and bailing out when an error is encountered in the callback function. Signed-off-by: Hari Bathini <[email protected]> Tested-by: Pingfan Liu <[email protected]> Reviewed-by: Thiago Jung Bauermann <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
2020-07-29powerpc/kexec_file: Avoid stomping memory used by special regionsHari Bathini2-2/+19
crashkernel region could have an overlap with special memory regions like OPAL, RTAS, TCE table & such. These regions are referred to as excluded memory ranges. Setup these ranges during image probe in order to avoid them while finding the buffer for different kdump segments. Override arch_kexec_locate_mem_hole() to locate a memory hole taking these ranges into account. Signed-off-by: Hari Bathini <[email protected]> Reviewed-by: Thiago Jung Bauermann <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/159602281047.575379.6636807148335160795.stgit@hbathini
2020-07-29powerpc/kexec_file: Add helper functions for getting memory rangesHari Bathini1-0/+11
In kexec case, the kernel to be loaded uses the same memory layout as the running kernel. So, passing on the DT of the running kernel would be good enough. But in case of kdump, different memory ranges are needed to manage loading the kdump kernel, booting into it and exporting the elfcore of the crashing kernel. The ranges are exclude memory ranges, usable memory ranges, reserved memory ranges and crash memory ranges. Exclude memory ranges specify the list of memory ranges to avoid while loading kdump segments. Usable memory ranges list the memory ranges that could be used for booting kdump kernel. Reserved memory ranges list the memory regions for the loading kernel's reserve map. Crash memory ranges list the memory ranges to be exported as the crashing kernel's elfcore. Add helper functions for setting up the above mentioned memory ranges. This helpers facilitate in understanding the subsequent changes better and make it easy to setup the different memory ranges listed above, as and when appropriate. Signed-off-by: Hari Bathini <[email protected]> Tested-by: Pingfan Liu <[email protected]> Reviewed-by: Thiago Jung Bauermann <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/159602279194.575379.8526552316948643550.stgit@hbathini
2020-07-29powerpc/kexec_file: Mark PPC64 specific codeHari Bathini1-0/+9
Some of the kexec_file_load code isn't PPC64 specific. Move PPC64 specific code from kexec/file_load.c to kexec/file_load_64.c. Also, rename purgatory/trampoline.S to purgatory/trampoline_64.S in the same spirit. No functional changes. Signed-off-by: Hari Bathini <[email protected]> Tested-by: Pingfan Liu <[email protected]> Reviewed-by: Laurent Dufour <[email protected]> Reviewed-by: Thiago Jung Bauermann <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/159602276920.575379.10390965946438306388.stgit@hbathini
2020-07-29powerpc/64s: Move HMI IRQ stat from percpu variable to paca.Mahesh Salgaonkar2-1/+1
With the proposed change in percpu bootmem allocator to use page mapping [1], the percpu first chunk memory area can come from vmalloc ranges. This makes the HMI (Hypervisor Maintenance Interrupt) handler crash the kernel whenever percpu variable is accessed in real mode. This patch fixes this issue by moving the HMI IRQ stat inside paca for safe access in realmode. [1] https://lore.kernel.org/linuxppc-dev/[email protected]/ Suggested-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Mahesh Salgaonkar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/159290806973.3642154.5244613424529764050.stgit@jupiter
2020-07-29ocxl: Remove unnecessary externsAlastair D'Silva1-21/+19
Function declarations don't need externs, remove the existing ones so they are consistent with newer code Signed-off-by: Alastair D'Silva <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Acked-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.