| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for reset of secure guest via a new ioctl KVM_PPC_SVM_OFF.
This ioctl will be issued by QEMU during reset and includes the
the following steps:
- Release all device pages of the secure guest.
- Ask UV to terminate the guest via UV_SVM_TERMINATE ucall
- Unpin the VPA pages so that they can be migrated back to secure
side when guest becomes secure again. This is required because
pinned pages can't be migrated.
- Reinit the partition scoped page tables
After these steps, guest is ready to issue UV_ESM call once again
to switch to secure mode.
Signed-off-by: Bharata B Rao <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
[Implementation of uv_svm_terminate() and its call from
guest shutdown path]
Signed-off-by: Ram Pai <[email protected]>
[Unpinning of VPA pages]
Signed-off-by: Paul Mackerras <[email protected]>
|
|
Register the new memslot with UV during plug and unregister
the memslot during unplug. In addition, release all the
device pages during unplug.
Signed-off-by: Bharata B Rao <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
|
|
- After the guest becomes secure, when we handle a page fault of a page
belonging to SVM in HV, send that page to UV via UV_PAGE_IN.
- Whenever a page is unmapped on the HV side, inform UV via UV_PAGE_INVAL.
- Ensure all those routines that walk the secondary page tables of
the guest don't do so in case of secure VM. For secure guest, the
active secondary page tables are in secure memory and the secondary
page tables in HV are freed when guest becomes secure.
Signed-off-by: Bharata B Rao <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
|
|
A pseries guest can be run as secure guest on Ultravisor-enabled
POWER platforms. On such platforms, this driver will be used to manage
the movement of guest pages between the normal memory managed by
hypervisor (HV) and secure memory managed by Ultravisor (UV).
HV is informed about the guest's transition to secure mode via hcalls:
H_SVM_INIT_START: Initiate securing a VM
H_SVM_INIT_DONE: Conclude securing a VM
As part of H_SVM_INIT_START, register all existing memslots with
the UV. H_SVM_INIT_DONE call by UV informs HV that transition of
the guest to secure mode is complete.
These two states (transition to secure mode STARTED and transition
to secure mode COMPLETED) are recorded in kvm->arch.secure_guest.
Setting these states will cause the assembly code that enters the
guest to call the UV_RETURN ucall instead of trying to enter the
guest directly.
Migration of pages betwen normal and secure memory of secure
guest is implemented in H_SVM_PAGE_IN and H_SVM_PAGE_OUT hcalls.
H_SVM_PAGE_IN: Move the content of a normal page to secure page
H_SVM_PAGE_OUT: Move the content of a secure page to normal page
Private ZONE_DEVICE memory equal to the amount of secure memory
available in the platform for running secure guests is created.
Whenever a page belonging to the guest becomes secure, a page from
this private device memory is used to represent and track that secure
page on the HV side. The movement of pages between normal and secure
memory is done via migrate_vma_pages() using UV_PAGE_IN and
UV_PAGE_OUT ucalls.
In order to prevent the device private pages (that correspond to pages
of secure guest) from participating in KSM merging, H_SVM_PAGE_IN
calls ksm_madvise() under read version of mmap_sem. However
ksm_madvise() needs to be under write lock. Hence we call
kvmppc_svm_page_in with mmap_sem held for writing, and it then
downgrades to a read lock after calling ksm_madvise.
[[email protected] - roll in patch "KVM: PPC: Book3S HV: Take write
mmap_sem when calling ksm_madvise"]
Signed-off-by: Bharata B Rao <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
|
|
A new kernel deserves a clean slate. Any pages shared with the hypervisor
is unshared before invoking the new kernel. However there are exceptions.
If the new kernel is invoked to dump the current kernel, or if there is a
explicit request to preserve the state of the current kernel, unsharing
of pages is skipped.
NOTE: While testing crashkernel, make sure at least 256M is reserved for
crashkernel. Otherwise SWIOTLB allocation will fail and crash kernel will
fail to boot.
Signed-off-by: Ram Pai <[email protected]>
Signed-off-by: Thiago Jung Bauermann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
These functions are used when the guest wants to grant the hypervisor
access to certain pages.
Signed-off-by: Ram Pai <[email protected]>
Signed-off-by: Thiago Jung Bauermann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make the Enter-Secure-Mode (ESM) ultravisor call to switch the VM to secure
mode. Pass kernel base address and FDT address so that the Ultravisor is
able to verify the integrity of the VM using information from the ESM blob.
Add "svm=" command line option to turn on switching to secure mode.
Signed-off-by: Ram Pai <[email protected]>
[ andmike: Generate an RTAS os-term hcall when the ESM ucall fails. ]
Signed-off-by: Michael Anderson <[email protected]>
[ bauerman: Cleaned up the code a bit. ]
Signed-off-by: Thiago Jung Bauermann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When an SVM makes an hypercall or incurs some other exception, the
Ultravisor usually forwards (a.k.a. reflects) the exceptions to the
Hypervisor. After processing the exception, Hypervisor uses the
UV_RETURN ultracall to return control back to the SVM.
The expected register state on entry to this ultracall is:
* Non-volatile registers are restored to their original values.
* If returning from an hypercall, register R0 contains the return value
(unlike other ultracalls) and, registers R4 through R12 contain any
output values of the hypercall.
* R3 contains the ultracall number, i.e UV_RETURN.
* If returning with a synthesized interrupt, R2 contains the
synthesized interrupt number.
Thanks to input from Paul Mackerras, Ram Pai and Mike Anderson.
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Claudio Carvalho <[email protected]>
Acked-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When Ultravisor (UV) is enabled, the partition table is stored in secure
memory and can only be accessed via the UV. The Hypervisor (HV) however
maintains a copy of the partition table in normal memory to allow Nest MMU
translations to occur (for normal VMs). The HV copy includes partition
table entries (PATE)s for secure VMs which would currently be unused
(Nest MMU translations cannot access secure memory) but they would be
needed as we add functionality.
This patch adds the UV_WRITE_PATE ucall which is used to update the PATE
for a VM (both normal and secure) when Ultravisor is enabled.
Signed-off-by: Michael Anderson <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Ram Pai <[email protected]>
[ cclaudio: Write the PATE in HV's table before doing that in UV's ]
Signed-off-by: Claudio Carvalho <[email protected]>
Reviewed-by: Ryan Grimm <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The ultracalls (ucalls for short) allow the Secure Virtual Machines
(SVM)s and hypervisor to request services from the ultravisor such as
accessing a register or memory region that can only be accessed when
running in ultravisor-privileged mode.
This patch adds the ucall_norets() ultravisor call handler.
The specific service needed from an ucall is specified in register
R3 (the first parameter to the ucall). Other parameters to the
ucall, if any, are specified in registers R4 through R12.
Return value of all ucalls is in register R3. Other output values
from the ucall, if any, are returned in registers R4 through R12.
Each ucall returns specific error codes, applicable in the context
of the ucall. However, like with the PowerPC Architecture Platform
Reference (PAPR), if no specific error code is defined for a particular
situation, then the ucall will fallback to an erroneous
parameter-position based code. i.e U_PARAMETER, U_P2, U_P3 etc depending
on the ucall parameter that may have caused the error.
Every host kernel (powernv) needs to be able to do ucalls in case it
ends up being run in a machine with ultravisor enabled. Otherwise, the
kernel may crash early in boot trying to access ultravisor resources,
for instance, trying to set the partition table entry 0. Secure guests
also need to be able to do ucalls and its kernel may not have
CONFIG_PPC_POWERNV=y. For that reason, the ucall.S file is placed under
arch/powerpc/kernel.
If ultravisor is not enabled, the ucalls will be redirected to the
hypervisor which must handle/fail the call.
Thanks to inputs from Ram Pai and Michael Anderson.
Signed-off-by: Claudio Carvalho <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|