aboutsummaryrefslogtreecommitdiff
path: root/arch/parisc/mm/fault.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-08-12mm/parisc: use general page fault accountingPeter Xu1-5/+3
Use the general page fault accounting by passing regs into handle_mm_fault(). It naturally solve the issue of multiple page fault accounting when page fault retry happened. Add the missing PERF_COUNT_SW_PAGE_FAULTS perf events too. Note, the other two perf events (PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]) were done in handle_mm_fault(). Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: Helge Deller <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-08-12mm: do page fault accounting in handle_mm_faultPeter Xu1-1/+1
Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Albert Ou <[email protected]> Cc: Alexander Gordeev <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Dave Hansen <[email protected]> Cc: David S. Miller <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Gerald Schaefer <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: John Hubbard <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: "Luck, Tony" <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Stefan Kristiansson <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mmap locking API: convert mmap_sem API commentsMichel Lespinasse1-1/+1
Convert comments that reference old mmap_sem APIs to reference corresponding new mmap locking APIs instead. Signed-off-by: Michel Lespinasse <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Reviewed-by: Davidlohr Bueso <[email protected]> Reviewed-by: Daniel Jordan <[email protected]> Cc: David Rientjes <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Laurent Dufour <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ying Han <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse1-4/+4
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Daniel Jordan <[email protected]> Reviewed-by: Laurent Dufour <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: David Rientjes <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ying Han <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-02mm: allow VM_FAULT_RETRY for multiple timesPeter Xu1-3/+1
The idea comes from a discussion between Linus and Andrea [1]. Before this patch we only allow a page fault to retry once. We achieved this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing handle_mm_fault() the second time. This was majorly used to avoid unexpected starvation of the system by looping over forever to handle the page fault on a single page. However that should hardly happen, and after all for each code path to return a VM_FAULT_RETRY we'll first wait for a condition (during which time we should possibly yield the cpu) to happen before VM_FAULT_RETRY is really returned. This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY flag when we receive VM_FAULT_RETRY. It means that the page fault handler now can retry the page fault for multiple times if necessary without the need to generate another page fault event. Meanwhile we still keep the FAULT_FLAG_TRIED flag so page fault handler can still identify whether a page fault is the first attempt or not. Then we'll have these combinations of fault flags (only considering ALLOW_RETRY flag and TRIED flag): - ALLOW_RETRY and !TRIED: this means the page fault allows to retry, and this is the first try - ALLOW_RETRY and TRIED: this means the page fault allows to retry, and this is not the first try - !ALLOW_RETRY and !TRIED: this means the page fault does not allow to retry at all - !ALLOW_RETRY and TRIED: this is forbidden and should never be used In existing code we have multiple places that has taken special care of the first condition above by checking against (fault_flags & FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect the first retry of a page fault by checking against both (fault_flags & FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now even the 2nd try will have the ALLOW_RETRY set, then use that helper in all existing special paths. One example is in __lock_page_or_retry(), now we'll drop the mmap_sem only in the first attempt of page fault and we'll keep it in follow up retries, so old locking behavior will be retained. This will be a nice enhancement for current code [2] at the same time a supporting material for the future userfaultfd-writeprotect work, since in that work there will always be an explicit userfault writeprotect retry for protected pages, and if that cannot resolve the page fault (e.g., when userfaultfd-writeprotect is used in conjunction with swapped pages) then we'll possibly need a 3rd retry of the page fault. It might also benefit other potential users who will have similar requirement like userfault write-protection. GUP code is not touched yet and will be covered in follow up patch. Please read the thread below for more information. [1] https://lore.kernel.org/lkml/[email protected]/ [2] https://lore.kernel.org/lkml/[email protected]/ Suggested-by: Linus Torvalds <[email protected]> Suggested-by: Andrea Arcangeli <[email protected]> Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Brian Geffon <[email protected]> Cc: Bobby Powers <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Denis Plotnikov <[email protected]> Cc: "Dr . David Alan Gilbert" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Martin Cracauer <[email protected]> Cc: Marty McFadden <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Maya Gokhale <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Emelyanov <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-02mm: introduce FAULT_FLAG_DEFAULTPeter Xu1-1/+1
Although there're tons of arch-specific page fault handlers, most of them are still sharing the same initial value of the page fault flags. Say, merely all of the page fault handlers would allow the fault to be retried, and they also allow the fault to respond to SIGKILL. Let's define a default value for the fault flags to replace those initial page fault flags that were copied over. With this, it'll be far easier to introduce new fault flag that can be used by all the architectures instead of touching all the archs. Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Brian Geffon <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Bobby Powers <[email protected]> Cc: Denis Plotnikov <[email protected]> Cc: "Dr . David Alan Gilbert" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Martin Cracauer <[email protected]> Cc: Marty McFadden <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Maya Gokhale <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Emelyanov <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-02mm: introduce fault_signal_pending()Peter Xu1-1/+1
For most architectures, we've got a quick path to detect fatal signal after a handle_mm_fault(). Introduce a helper for that quick path. It cleans the current codes a bit so we don't need to duplicate the same check across archs. More importantly, this will be an unified place that we handle the signal immediately right after an interrupted page fault, so it'll be much easier for us if we want to change the behavior of handling signals later on for all the archs. Note that currently only part of the archs are using this new helper, because some archs have their own way to handle signals. In the follow up patches, we'll try to apply this helper to all the rest of archs. Another note is that the "regs" parameter in the new helper is not used yet. It'll be used very soon. Now we kept it in this patch only to avoid touching all the archs again in the follow up patches. [[email protected]: fix sparse warnings] Link: http://lkml.kernel.org/r/20200311145921.GD479302@xz-x1 Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Brian Geffon <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Bobby Powers <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Denis Plotnikov <[email protected]> Cc: "Dr . David Alan Gilbert" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Martin Cracauer <[email protected]> Cc: Marty McFadden <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Maya Gokhale <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Emelyanov <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2019-07-31parisc: Mark expected switch fall-throughs in fault.cHelge Deller1-0/+1
Fix a fall-through warning in fault.c. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller <[email protected]>
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman1-1/+1
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <[email protected]>
2019-05-27signal: Remove task parameter from force_sig_mceerrEric W. Biederman1-1/+1
All of the callers pass current into force_sig_mceer so remove the task parameter to make this obvious. This also makes it clear that force_sig_mceerr passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <[email protected]>
2018-08-17mm: convert return type of handle_mm_fault() caller to vm_fault_tSouptick Joarder1-1/+1
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") In this patch all the caller of handle_mm_fault() are changed to return vm_fault_t type. Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Tony Luck <[email protected]> Cc: Matt Turner <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Russell King <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Michal Simek <[email protected]> Cc: James Hogan <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: David S. Miller <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: "Levin, Alexander (Sasha Levin)" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-04-25signal/parisc: Use force_sig_fault where appropriateEric W. Biederman1-15/+10
Filling in struct siginfo before calling force_sig_info a tedious and error prone process, where once in a great while the wrong fields are filled out, and siginfo has been inconsistently cleared. Simplify this process by using the helper force_sig_fault. Which takes as a parameters all of the information it needs, ensures all of the fiddly bits of filling in struct siginfo are done properly and then calls force_sig_info. In short about a 5 line reduction in code for every time force_sig_info is called, which makes the calling function clearer. Cc: James Bottomley <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Acked-by: Helge Deller <[email protected]> # parisc Signed-off-by: "Eric W. Biederman" <[email protected]>
2018-04-25signal/parisc: Use force_sig_mceerr where appropriateEric W. Biederman1-15/+15
In do_page_fault where an mceerr is generated stop and call force_sig_mceerr. Keeping the mcerr handling logic out of the force_sig_info call below. This ensures that only and always in the mcerr case is lsb interesting. This ensures setting set si_lsb in the future won't accidentally stomp another siginfo field in the non mcerr case. Cc: James Bottomley <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Acked-by: Helge Deller <[email protected]> # parisc Signed-off-by: "Eric W. Biederman" <[email protected]>
2018-04-25signal: Ensure every siginfo we send has all bits initializedEric W. Biederman1-0/+1
Call clear_siginfo to ensure every stack allocated siginfo is properly initialized before being passed to the signal sending functions. Note: It is not safe to depend on C initializers to initialize struct siginfo on the stack because C is allowed to skip holes when initializing a structure. The initialization of struct siginfo in tracehook_report_syscall_exit was moved from the helper user_single_step_siginfo into tracehook_report_syscall_exit itself, to make it clear that the local variable siginfo gets fully initialized. In a few cases the scope of struct siginfo has been reduced to make it clear that siginfo siginfo is not used on other paths in the function in which it is declared. Instances of using memset to initialize siginfo have been replaced with calls clear_siginfo for clarity. Signed-off-by: "Eric W. Biederman" <[email protected]>
2017-09-22parisc: Add HWPOISON page fault handler codeHelge Deller1-4/+29
Commit 24587380f61d ("parisc: Add MADV_HWPOISON and MADV_SOFT_OFFLINE") added the necessary constants to handle hardware-poisoning. Those were needed to support the page deallocation feature from firmware. But I completely missed to add the relevant fault handler code. This now showed up when I ran the madvise07 testcase from the Linux Test Project, which failed with a kernel BUG at arch/parisc/mm/fault.c:320. With this patch the parisc kernel now behaves like other platforms and gives the same kernel syslog warnings when poisoning pages. Signed-off-by: Helge Deller <[email protected]>
2017-07-02parisc: Report SIGSEGV instead of SIGBUS when running out of stackHelge Deller1-1/+1
When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Cc: [email protected] Signed-off-by: Helge Deller <[email protected]>
2017-06-09parisc: Avoid zeroing gr[0] in fixup_exception()Helge Deller1-0/+1
Register gr[0] holds the PSW in interrupt context. It's absolutely unlikely that the compiler will use register zero in a get_user() call, but better BUG on such a case in fixup_exception() anyway. Signed-off-by: Helge Deller <[email protected]>
2017-05-10parisc: Drop per_cpu uaccess related exception_data structHelge Deller1-9/+0
The last users have been migrated off by commits d19f5e41b344 ("parisc: Clean up fixup routines for get_user()/put_user()") and 554bfeceb8a2 ("parisc: Fix access fault handling in pa_memcpy()"). Signed-off-by: Helge Deller <[email protected]>
2017-03-29parisc: Clean up fixup routines for get_user()/put_user()Helge Deller1-0/+17
Al Viro noticed that userspace accesses via get_user()/put_user() can be simplified a lot with regard to usage of the exception handling. This patch implements a fixup routine for get_user() and put_user() in such that the exception handler will automatically load -EFAULT into the register %r8 (the error value) in case on a fault on userspace. Additionally the fixup routine will zero the target register on fault in case of a get_user() call. The target register is extracted out of the faulting assembly instruction. This patch brings a few benefits over the old implementation: 1. Exception handling gets much cleaner, easier and smaller in size. 2. Helper functions like fixup_get_user_skip_1 (all of fixup.S) can be dropped. 3. No need to hardcode %r9 as target register for get_user() any longer. This helps the compiler register allocator and thus creates less assembler statements. 4. No dependency on the exception_data contents any longer. 5. Nested faults will be handled cleanly. Reported-by: Al Viro <[email protected]> Cc: <[email protected]> # v4.9+ Signed-off-by: Helge Deller <[email protected]>
2017-03-03Merge branch 'parisc-4.11-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes and cleanups from Helge Deller: "Nothing really important in this patchset: fix resource leaks in error paths, coding style cleanups and code removal" * 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Remove flush_user_dcache_range and flush_user_icache_range parisc: fix a printk parisc: ccio-dma: Handle return NULL error from ioremap_nocache parisc: Define access_ok() as macro parisc: eisa: Fix resource leaks in error paths parisc: eisa: Remove coding style errors
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-02-25parisc: fix a printkDan Carpenter1-2/+2
We want to do a pr_cont() here and not a pr_warn(). Fixes: b391667eb45a ("parisc: Report trap type as human readable string") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2017-01-02parisc: Add line-break when printing segfault infoHelge Deller1-1/+1
Add a leading line break else printed line gets too long. Signed-off-by: Helge Deller <[email protected]> Cc: <[email protected]> # v4.9
2016-10-11parisc: Show trap name in kernel crashHelge Deller1-6/+11
Show the real trap name when the kernel crashes. Signed-off-by: Helge Deller <[email protected]>
2016-10-08parisc: Migrate exception table users off module.h and onto extable.hPaul Gortmaker1-1/+1
This file was only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile this file. Cc: "James E.J. Bottomley" <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2016-09-24parisc: Report trap type as human readable stringHelge Deller1-1/+47
When faulting on some trap, the kernel currently reports in dmesg: do_page_fault() command='perl' type=6 address=0xbe400403 in libcrypt-2.24.so[f9086000+9000] vm_start = 0x00922000, vm_end = 0x00aed000 With this change the trap type additionally gets reported as human readable string which makes it simpler to recognize the type of problem: do_page_fault() command='perl' type=6 address=0xbe400403 in libcrypt-2.24.so[f9086000+9000] trap #6: Instruction TLB miss fault, vm_start = 0x00922000, vm_end = 0x00aed000 Signed-off-by: Helge Deller <[email protected]>
2016-07-26mm: do not pass mm_struct into handle_mm_faultKirill A. Shutemov1-1/+1
We always have vma->vm_mm around. Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-04-08parisc: Unbreak handling exceptions from kernel modulesHelge Deller1-0/+1
Handling exceptions from modules never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. When a module triggers an exception in get_user() we need to load the main kernel dp value before accessing the exception_data structure, and afterwards restore the original dp value of the module on exit. Noticed-by: Mikulas Patocka <[email protected]> Signed-off-by: Helge Deller <[email protected]> Cc: [email protected]
2016-03-23parisc: Use generic extable search and sort routinesHelge Deller1-7/+2
Switch to the generic extable search and sort routines which were introduced with commit a272858 from Ard Biesheuvel. This saves quite some memory in the vmlinux binary with the 64bit kernel. Signed-off-by: Helge Deller <[email protected]>
2015-09-08parisc: Additionally check for in_atomic() in page fault handlerHelge Deller1-1/+1
Craig Estey noticed that we didn't checked for in_atomic() in our page fault handler like other architectures. This commit adds this check by using faulthandler_disabled() which includes a check for pagefault_disabled() and in_atomic(). Reported-by: Craig Estey <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2015-05-19mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in ↵David Hildenbrand1-2/+2
the handler Introduce faulthandler_disabled() and use it to check for irq context and disabled pagefaults (via pagefault_disable()) in the pagefault handlers. Please note that we keep the in_atomic() checks in place - to detect whether in irq context (in which case preemption is always properly disabled). In contrast, preempt_disable() should never be used to disable pagefaults. With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt counter, and therefore the result of in_atomic() differs. We validate that condition by using might_fault() checks when calling might_sleep(). Therefore, add a comment to faulthandler_disabled(), describing why this is needed. faulthandler_disabled() and pagefault_disable() are defined in linux/uaccess.h, so let's properly add that include to all relevant files. This patch is based on a patch from Thomas Gleixner. Reviewed-and-tested-by: Thomas Gleixner <[email protected]> Signed-off-by: David Hildenbrand <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-01-29vm: add VM_FAULT_SIGSEGV handling supportLinus Torvalds1-0/+2
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai <[email protected]> Tested-by: Jan Engelhardt <[email protected]> Acked-by: Heiko Carstens <[email protected]> # "s390 still compiles and boots" Cc: [email protected] Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2014-05-20Merge branch 'parisc-3.15-4' of ↵Linus Torvalds1-14/+30
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "There are two patches in here: The first patch greatly improves latency and corrects the memory ordering in our light-weight atomic locking syscall. The second patch ratelimits printing of userspace segfaults in the same way as it's done on other platforms. This fixes a possible DOS on parisc since it prevents the syslog to grow too fast. For example, when the debian acl2 package was built on our debian buildd servers, this package produced lots of gigabytes in syslog in very short time and thus filled our harddisks, which then turned the server nearly completely unaccessible and unresponsive" * 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Improve LWS-CAS performance parisc: ratelimit userspace segfault printing
2014-05-15parisc: ratelimit userspace segfault printingHelge Deller1-14/+30
Ratelimit printing of userspace segfaults and make it runtime configurable via the /proc/sys/debug/exception-trace variable. This should resolve syslog from growing way too fast and thus prevents possible system service attacks. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # 3.13+
2014-04-03parisc: Replace __get_cpu_var uses for address calculationChristoph Lameter1-1/+1
Convert to the use of this_cpu_ptr(). Cc: "James E.J. Bottomley" <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Signed-off-by: Christoph Lameter <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2013-11-19parisc: improve SIGBUS/SIGSEGV error reportingHelge Deller1-2/+20
This patch fixes most of the Linux Test Project testcases, e.g. fstat05. Signed-off-by: Helge Deller <[email protected]>
2013-11-07parisc: signal fixup - SIGBUS vs. SIGSEGVHelge Deller1-4/+14
Clean up code to send correct signal on invalid memory accesses: Send SIGBUS instead of SIGSEGV for memory accesses outside of mmap'ed areas This fixes the mmap13 testcase from the Linux Test Project. Signed-off-by: Helge Deller <[email protected]>
2013-11-07parisc: provide macro to create exception table entriesHelge Deller1-0/+6
Provide a macro ASM_EXCEPTIONTABLE_ENTRY() to create exception table entries and convert all open-coded places to use that macro. This patch is a first step toward creating a exception table which only holds 32bit pointers even on a 64bit kernel. That way in my own kernel I was able to reduce the in-kernel exception table from 44kB to 22kB. Signed-off-by: Helge Deller <[email protected]>
2013-10-13parisc: optimize variable initialization in do_page_faultJohn David Anglin1-5/+10
The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: John David Anglin <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2013-09-30arch/parisc/mm/fault.c: fix uninitialized variable usageFelipe Pena1-2/+3
The FAULT_FLAG_WRITE flag has been set based on uninitialized variable. Fixes a regression added by commit 759496ba6407 ("arch: mm: pass userspace fault flag to generic fault handler") Signed-off-by: Felipe Pena <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Helge Deller <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-09-12arch: mm: pass userspace fault flag to generic fault handlerJohannes Weiner1-2/+5
Unlike global OOM handling, memory cgroup code will invoke the OOM killer in any OOM situation because it has no way of telling faults occuring in kernel context - which could be handled more gracefully - from user-triggered faults. Pass a flag that identifies faults originating in user space from the architecture-specific fault handlers to generic code so that memcg OOM handling can be improved. Signed-off-by: Johannes Weiner <[email protected]> Reviewed-by: Michal Hocko <[email protected]> Cc: David Rientjes <[email protected]> Cc: KAMEZAWA Hiroyuki <[email protected]> Cc: azurIt <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-02-20parisc/mm/fault.c: Port OOM changes to do_page_faultKautuk Consul1-5/+25
Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to parisc. Signed-off-by: Kautuk Consul <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2010-05-30parisc: invoke oom-killer from page faultNick Piggin1-4/+3
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: [email protected] Cc: [email protected] Signed-off-by: Nick Piggin <[email protected]> Acked-by: David Rientjes <[email protected]> Signed-off-by: Kyle McMartin <[email protected]>
2009-07-03parisc: remove CVS keywordsAlexander Beregalov1-2/+1
Signed-off-by: Alexander Beregalov <[email protected]> Acked-by: Matthew Wilcox <[email protected]> Acked-by: Grant Grundler <[email protected]> Signed-off-by: Kyle McMartin <[email protected]>
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds1-1/+1
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <[email protected]>
2009-01-05parisc: fix kernel crash (protection id trap) when compiling ruby1.9Kyle McMartin1-27/+31
On Wed, Dec 17, 2008 at 11:46:05PM +0100, Helge Deller wrote: > Honestly, I can't decide whether to apply this. It really should never happen in the kernel, since the kernel can guarantee it won't get the access rights failure (highest privilege level, and can set %sr and %protid to whatever it wants.) It really genuinely is a bug that probably should panic the kernel. The only precedent I can easily see is x86 fixing up a bad iret with a general protection fault, which is more or less analogous to code 27 here. On the other hand, taking the exception on a userspace access really isn't all that critical, and there's fundamentally little reason for the kernel not to SIGSEGV the process, and continue... Argh. (btw, I've instrumented my do_sys_poll with a pile of assertions that %cr8 << 1 == %sr3 == current->mm.context... let's see if where we're getting corrupted is deterministic, though, I would guess that it won't be.) Signed-off-by: Kyle McMartin <[email protected]>
2007-10-19Use helpers to obtain task pid in printks (arch code)Alexey Dobriyan1-1/+1
One of the easiest things to isolate is the pid printed in kernel log. There was a patch, that made this for arch-independent code, this one makes so for arch/xxx files. It took some time to cross-compile it, but hopefully these are all the printks in arch code. Signed-off-by: Alexey Dobriyan <[email protected]> Signed-off-by: Pavel Emelyanov <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2007-10-16During VM oom condition, kill all threads in process groupWill Schmidt1-1/+1
We have had complaints where a threaded application is left in a bad state after one of it's threads is killed when we hit a VM: out_of_memory condition. Killing just one of the process threads can leave the application in a bad state, whereas killing the entire process group would allow for the application to restart, or be otherwise handled, and makes it very obvious that something has gone wrong. This change allows the entire process group to be taken down, rather than just the one thread. Signed-off-by: Will Schmidt <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Russell King <[email protected]> Cc: Ian Molton <[email protected]> Cc: Haavard Skinnemoen <[email protected]> Cc: Mikael Starvik <[email protected]> Cc: David Howells <[email protected]> Cc: Andi Kleen <[email protected]> Cc: "Luck, Tony" <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Roman Zippel <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Kyle McMartin <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Kazumoto Kojima <[email protected]> Cc: Richard Curnow <[email protected]> Cc: William Lee Irwin III <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Chris Zankel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2007-07-19mm: fault feedback #2Nick Piggin1-11/+12
This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [[email protected]: fix alpha build] [[email protected]: fix s390 build] [[email protected]: fix sparc build] [[email protected]: fix sparc64 build] [[email protected]: fix ia64 build] Signed-off-by: Nick Piggin <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Russell King <[email protected]> Cc: Ian Molton <[email protected]> Cc: Bryan Wu <[email protected]> Cc: Mikael Starvik <[email protected]> Cc: David Howells <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: "Luck, Tony" <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Roman Zippel <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Kazumoto Kojima <[email protected]> Cc: Richard Curnow <[email protected]> Cc: William Lee Irwin III <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jeff Dike <[email protected]> Cc: Paolo 'Blaisorblade' Giarrusso <[email protected]> Cc: Miles Bader <[email protected]> Cc: Chris Zankel <[email protected]> Acked-by: Kyle McMartin <[email protected]> Acked-by: Haavard Skinnemoen <[email protected]> Acked-by: Ralf Baechle <[email protected]> Acked-by: Andi Kleen <[email protected]> Signed-off-by: Andrew Morton <[email protected]> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <[email protected]>