aboutsummaryrefslogtreecommitdiff
path: root/arch/openrisc
AgeCommit message (Collapse)AuthorFilesLines
2017-03-28openrisc: switch to generic extable.hAl Viro2-17/+2
Signed-off-by: Al Viro <[email protected]>
2017-03-28new helper: uaccess_kernel()Al Viro1-1/+1
Signed-off-by: Al Viro <[email protected]>
2017-03-16openrisc: Export symbols needed by modulesStafford Horne2-0/+5
This was detected by allmodconfig, errors reported: ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined! ERROR: "__ucmpdi2" [lib/842/842_decompress.ko] undefined! ERROR: "empty_zero_page" [fs/nfs/objlayout/objlayoutdriver.ko] undefined! ERROR: "empty_zero_page" [fs/exofs/exofs.ko] undefined! ERROR: "empty_zero_page" [fs/crypto/fscrypto.ko] undefined! ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined! ERROR: "pm_power_off" [drivers/regulator/act8865-regulator.ko] undefined! ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined! ERROR: "__clear_user" [drivers/md/dm-mod.ko] undefined! ERROR: "__clear_user" [net/netfilter/x_tables.ko] undefined! Signed-off-by: Stafford Horne <[email protected]>
2017-03-16openrisc: fix issue handling 8 byte get_user callsStafford Horne1-1/+1
Was getting the following error with allmodconfig: ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined! This was simply a missing break statement, causing an unwanted fall through. Signed-off-by: Stafford Horne <[email protected]>
2017-03-16openrisc: xchg: fix `computed is not used` warningStafford Horne1-2/+6
When building allmodconfig this warning shows. fs/ocfs2/file.c: In function 'ocfs2_file_write_iter': ./arch/openrisc/include/asm/cmpxchg.h:81:3: warning: value computed is not used [-Wunused-value] ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), sizeof(*(ptr)))) ^ Applying the same patch logic that was done to the cmpxchg macro. Signed-off-by: Stafford Horne <[email protected]>
2017-03-09arch, mm: convert all architectures to use 5level-fixup.hKirill A. Shutemov1-0/+1
If an architecture uses 4level-fixup.h we don't need to do anything as it includes 5level-fixup.h. If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK before inclusion of the header. It makes asm-generic code to use 5level-fixup.h. If an architecture has 4-level paging or folds levels on its own, include 5level-fixup.h directly. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-05uaccess: drop duplicate includes from asm/uaccess.hAl Viro1-2/+0
Signed-off-by: Al Viro <[email protected]>
2017-03-05uaccess: move VERIFY_{READ,WRITE} definitions to linux/uaccess.hAl Viro1-3/+0
Signed-off-by: Al Viro <[email protected]>
2017-03-02sched/headers: Prepare to move kstack_end() from <linux/sched.h> to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> But first update the usage sites with the new header dependency. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-02-27scripts/spelling.txt: add "efective" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: efective||effective While we are here, fix the "addres" as well in the touched line in arch/openrisc/kernel/entry.S. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-27scripts/spelling.txt: add "aligment" pattern and fix typo instancesMasahiro Yamada3-7/+7
Fix typos and add the following to the scripts/spelling.txt: aligment||alignment I did not touch the "N_BYTE_ALIGMENT" macro in drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable impact. I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because it is surrounded by #if 0 ... #endif. It is surely safe and I confirmed "_alignment_handler" is correct. I also fixed the "controler" I found in the same hunk in arch/openrisc/kernel/head.S. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-27kprobes: move kprobe declarations to asm-generic/kprobes.hLuis R. Rodriguez1-0/+1
Often all is needed is these small helpers, instead of compiler.h or a full kprobes.h. This is important for asm helpers, in fact even some asm/kprobes.h make use of these helpers... instead just keep a generic asm file with helpers useful for asm code with the least amount of clutter as possible. Likewise we need now to also address what to do about this file for both when architectures have CONFIG_HAVE_KPROBES, and when they do not. Then for when architectures have CONFIG_HAVE_KPROBES but have disabled CONFIG_KPROBES. Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES, this means most architecture code cannot include asm/kprobes.h safely. Correct this and add guards for architectures missing them. Additionally provide architectures that not have kprobes support with the default asm-generic solution. This lets us force asm/kprobes.h on the header include/linux/kprobes.h always, but most importantly we can now safely include just asm/kprobes.h on architecture code without bringing the full kitchen sink of header files. Two architectures already provided a guard against CONFIG_KPROBES on its kprobes.h: sh, arch. The rest of the architectures needed gaurds added. We avoid including any not-needed headers on asm/kprobes.h unless kprobes have been enabled. In a subsequent atomic change we can try now to remove compiler.h from include/linux/kprobes.h. During this sweep I've also identified a few architectures defining a common macro needed for both kprobes and ftrace, that of the definition of the breakput instruction up. Some refer to this as BREAKPOINT_INSTRUCTION. This must be kept outside of the #ifdef CONFIG_KPROBES guard. [[email protected]: fix arm64 build] Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com [[email protected]: fixup for kprobes declarations moving] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Luis R. Rodriguez <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Ananth N Mavinakayanahalli <[email protected]> Cc: Anil S Keshavamurthy <[email protected]> Cc: David S. Miller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Steven Rostedt <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-25Merge tag 'for-next-dma_ops' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-24Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds23-187/+1058
Pull OpenRISC updates from Stafford Horne: "Highlights include: - optimized memset and memcpy routines, ~20% boot time saving - support for cpu idling - adding support for l.swa and l.lwa atomic operations (in spec from 2014) - use atomics to implement: bitops, cmpxchg, futex - the atomics are in preparation for SMP support" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits) openrisc: head: Init r0 to 0 on start openrisc: Export ioremap symbols used by modules arch/openrisc/lib/memcpy.c: use correct OR1200 option openrisc: head: Remove unused strings openrisc: head: Move init strings to rodata section openrisc: entry: Fix delay slot detection openrisc: entry: Whitespace and comment cleanups scripts/checkstack.pl: Add openrisc support MAINTAINERS: Add the openrisc official repository openrisc: Add .gitignore openrisc: Add optimized memcpy routine openrisc: Add optimized memset openrisc: Initial support for the idle state openrisc: Fix the bitmask for the unit present register openrisc: remove unnecessary stddef.h include openrisc: add futex_atomic_* implementations openrisc: add optimized atomic operations openrisc: add cmpxchg and xchg implementations openrisc: add atomic bitops openrisc: add l.lwa/l.swa emulation ...
2017-02-25openrisc: head: Init r0 to 0 on startStafford Horne1-1/+4
Originally openrisc spec 0 specified that r0 would be wired to ground. This is no longer the case. r0 is not guaranteed to be 0 at init, so we need to initialize it to 0 before using it. Also, if we are clearing r0 we cant use r0 to clear itself. Change the the CLEAR_GPR macro to use movhi for clearing. Reported-by: Jakob Viketoft <[email protected]> Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: Export ioremap symbols used by modulesStafford Horne1-0/+2
Noticed this when building with allyesconfig. Got build failures due to iounmap and __ioremap symbols missing. This patch exports them so modules can use them. This is inline with other architectures. Signed-off-by: Stafford Horne <[email protected]>
2017-02-25arch/openrisc/lib/memcpy.c: use correct OR1200 optionValentin Rothberg1-1/+1
The Kconfig option for OR12000 is OR1K_1200. Signed-off-by: Valentin Rothberg <[email protected]> Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: head: Remove unused stringsStafford Horne1-11/+0
These string definitions are no longer used removed them. Noticed this while working on a CONFIG_DEBUG_INFO build issue. Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: head: Move init strings to rodata sectionStafford Horne1-0/+1
The strings used during the head/init phase of openrisc bootup were stored in the executable section of the binary. This causes compilation to fail when using CONFIG_DEBUG_INFO with error: Error: unaligned opcodes detected in executable segment Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: entry: Fix delay slot detectionStafford Horne1-2/+2
Use execption SR stored in pt_regs for detection, the current SR is not correct as the handler is running after return from exception. Also, The code that checks for a delay slot uses a flag bitmask and then wants to check if the result is not zero. The test it implemented was wrong. Correct it by changing the test to check result against non zero. Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: entry: Whitespace and comment cleanupsStafford Horne1-20/+18
Cleanups to whitespace and add some comments. Reading through the delay slot logic I noticed some things: - Delay slot instructions were not indented - Some comments are not lined up - Use tabs and spaces consistent with other code No functional change Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: Add .gitignoreStafford Horne1-0/+1
This helps to suppress the vmlinux.lds file. Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: Add optimized memcpy routineStafford Horne4-2/+128
The generic memcpy routine provided in kernel does only byte copies. Using word copies we can lower boot time and cycles spend in memcpy quite significantly. Booting on my de0 nano I see boot times go from 7.2 to 5.6 seconds. The avg cycles in memcpy during boot go from 6467 to 1887. I tested several algorithms (see code in previous patch mails) The implementations I tested and avg cycles: - Word Copies + Loop Unrolls + Non Aligned 1882 - Word Copies + Loop Unrolls 1887 - Word Copies 2441 - Byte Copies + Loop Unrolls 6467 - Byte Copies 7600 In the end I ended up going with Word Copies + Loop Unrolls as it provides best tradeoff between simplicity and boot speedups. Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: Add optimized memsetOlof Kindgren4-1/+107
This adds a hand-optimized assembler version of memset and sets __HAVE_ARCH_MEMSET to use this version instead of the generic C routine Signed-off-by: Olof Kindgren <[email protected]> Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: Initial support for the idle stateSebastian Macke1-0/+11
This patch adds basic support for the idle state of the cpu. The patch overrides the regular idle function, enables the interupts, checks for the power management unit and enables the cpu doze mode if available. Signed-off-by: Sebastian Macke <[email protected]> [[email protected]: Fixed checkpatch, blankline after declarations] Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: Fix the bitmask for the unit present registerSebastian Macke1-2/+2
The bits were swapped, as per spec and processor implementation the power management present bit is 9 and PIC bit is 8. This patch brings the definitions into spec. Signed-off-by: Sebastian Macke <[email protected]> [[email protected]: Added commit body] Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: remove unnecessary stddef.h includeStefan Kristiansson1-1/+0
This causes the build to fail when building with the or1k-musl-linux- toolchain and it is not needed. Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: add futex_atomic_* implementationsStefan Kristiansson2-1/+135
Support for the futex_atomic_* operations by using the load-link/store-conditional l.lwa/l.swa instructions. Most openrisc cores provide these instructions now if not available, emulation is provided. Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666] Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: add optimized atomic operationsStefan Kristiansson2-1/+126
Using the l.lwa and l.swa atomic instruction pair. Most openrisc processor cores provide these instructions now. If the instructions are not available emulation is provided. Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666] [[email protected]: expand to implement all ops suggested by Peter Zijlstra https://lkml.org/lkml/2017/2/20/317] Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: add cmpxchg and xchg implementationsStefan Kristiansson2-2/+83
Optimized version that make use of the l.lwa and l.swa atomic instruction pair. Most openrisc cores provide these instructions now, if not available emulation is provided. Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666] [[email protected]: fixed unused calculated value compiler warning in define cmpxchg] Signed-off-by: Stafford Horne <[email protected]>
2017-02-25openrisc: add atomic bitopsStefan Kristiansson2-1/+124
This utilize the load-link/store-conditional l.lwa and l.swa instructions to implement the atomic bitops. When those instructions are not available emulation is provided. Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: remove OPENRISC_HAVE_INST_LWA_SWA config suggesed by Alan Cox https://lkml.org/lkml/2014/7/23/666, implement test_and_change_bit] Signed-off-by: Stafford Horne <[email protected]>
2017-02-21Merge tag 'extable-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull exception table module split from Paul Gortmaker: "Final extable.h related changes. This completes the separation of exception table content from the module.h header file. This is achieved with the final commit that removes the one line back compatible change that sourced extable.h into the module.h file. The commits are unchanged since January, with the exception of a couple Acks that came in for the last two commits a bit later. The changes have been in linux-next for quite some time[1] and have got widespread arch coverage via toolchains I have and also from additional ones the kbuild bot has. Maintaners of the various arch were Cc'd during the postings to lkml[2] and informed that the intention was to take the remaining arch specific changes and lump them together with the final two non-arch specific changes and submit for this merge window. The ia64 diffstat stands out and probably warrants a mention. In an earlier review, Al Viro made a valid comment that the original header separation of content left something to be desired, and that it get fixed as a part of this change, hence the larger diffstat" * tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits) module.h: remove extable.h include now users have migrated core: migrate exception table users off module.h and onto extable.h cris: migrate exception table users off module.h and onto extable.h hexagon: migrate exception table users off module.h and onto extable.h microblaze: migrate exception table users off module.h and onto extable.h unicore32: migrate exception table users off module.h and onto extable.h score: migrate exception table users off module.h and onto extable.h metag: migrate exception table users off module.h and onto extable.h arc: migrate exception table users off module.h and onto extable.h nios2: migrate exception table users off module.h and onto extable.h sparc: migrate exception table users onto extable.h openrisc: migrate exception table users off module.h and onto extable.h frv: migrate exception table users off module.h and onto extable.h sh: migrate exception table users off module.h and onto extable.h xtensa: migrate exception table users off module.h and onto extable.h mn10300: migrate exception table users off module.h and onto extable.h alpha: migrate exception table users off module.h and onto extable.h arm: migrate exception table users off module.h and onto extable.h m32r: migrate exception table users off module.h and onto extable.h ia64: ensure exception table search users include extable.h ...
2017-02-06openrisc: add l.lwa/l.swa emulationStefan Kristiansson3-2/+206
This adds an emulation layer for implementations that lack the l.lwa and l.swa instructions. It handles these instructions both in kernel space and user space. Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: Added delay slot pc adjust logic] Signed-off-by: Stafford Horne <[email protected]>
2017-02-06openrisc: head: refactor out tlb flush into it's own functionStefan Kristiansson1-16/+22
This brings it inline with the other setup oprations done like the cache enables _ic_enable and _dc_enable. Also, this is going to make it easier to initialize additional cpu's when smp is introduced. Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: Added commit body] Signed-off-by: Stafford Horne <[email protected]>
2017-02-06openrisc: head: use THREAD_SIZE instead of magic constantStefan Kristiansson1-1/+3
The stack size was hard coded to 0x2000, use the standard THREAD_SIZE definition loaded from thread_info.h. Signed-off-by: Stefan Kristiansson <[email protected]> [[email protected]: Added body to the commit message] Signed-off-by: Stafford Horne <[email protected]>
2017-02-06openrisc: tlb miss handler optimizationsStefan Kristiansson1-95/+46
By slightly reorganizing the code, the number of registers used in the tlb miss handlers can be reduced by two, thus removing the need to save them to memory. Also, some dead and commented out code is removed. No functional change. Signed-off-by: Stefan Kristiansson <[email protected]> Signed-off-by: Jonas Bonn <[email protected]> Signed-off-by: Stafford Horne <[email protected]>
2017-02-06openrisc: add cache way information to cpuinfoStefan Kristiansson2-31/+38
Motivation for this is to be able to print the way information properly in print_cpuinfo(), instead of hardcoding it to one. Signed-off-by: Stefan Kristiansson <[email protected]> Signed-off-by: Jonas Bonn <[email protected]> [[email protected] fixed conflict with show_cpuinfo change] Signed-off-by: Stafford Horne <[email protected]>
2017-02-06openrisc: use SPARSE_IRQJonas Bonn2-0/+2
The sparse IRQ framework is preferred nowadays so switch over to it. Signed-off-by: Jonas Bonn <[email protected]> Signed-off-by: Stafford Horne <[email protected]>
2017-02-01sched/cputime: Remove generic asm headersFrederic Weisbecker1-1/+0
cputime_t is now only used by two architectures: * powerpc (when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y) * s390 And since the core doesn't use it anymore, we don't need any arch support from the others. So we can remove their stub implementations. A final cleanup would be to provide an efficient pure arch implementation of cputime_to_nsec() for s390 and powerpc and finally remove include/linux/cputime.h . Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Stanislaw Gruszka <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Wanpeng Li <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-01-26openrisc: migrate exception table users off module.h and onto extable.hPaul Gortmaker2-2/+2
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Reported-by: kbuild test robot <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Stefan Kristiansson <[email protected]> Cc: Stafford Horne <[email protected]> Cc: [email protected] Signed-off-by: Paul Gortmaker <[email protected]>
2017-01-24treewide: Consolidate get_dma_ops() implementationsBart Van Assche1-1/+1
Introduce a new architecture-specific get_arch_dma_ops() function that takes a struct bus_type * argument. Add get_dma_ops() in <linux/dma-mapping.h>. Signed-off-by: Bart Van Assche <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Juergen Gross <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Russell King <[email protected]> Cc: [email protected] Signed-off-by: Doug Ledford <[email protected]>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche2-3/+3
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Juergen Gross <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Russell King <[email protected]> Cc: [email protected] Signed-off-by: Doug Ledford <[email protected]>
2017-01-02openrisc: Add _text symbol to fix ksym build errorStafford Horne1-0/+2
The build robot reports: .tmp_kallsyms1.o: In function `kallsyms_relative_base': >> (.rodata+0x8a18): undefined reference to `_text' This is when using 'make alldefconfig'. Adding this _text symbol to mark the start of the kernel as in other architecture fixes this. Signed-off-by: Stafford Horne <[email protected]> Acked-by: Jonas Bonn <[email protected]>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-2/+2
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: John Stultz <[email protected]>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds5-5/+5
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-12-14arch/openrisc: add option to skip DMA sync as a part of mappingAlexander Duyck1-0/+3
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Alexander Duyck <[email protected]> Cc: Jonas Bonn <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.