aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2020-06-25MIPS: ingenic: gcw0: Fix HP detection GPIO.João H. Spies1-1/+1
Previously marked as active high, but is in reality active low. Cc: [email protected] Fixes: b1bfdb660516 ("MIPS: ingenic: DTS: Update GCW0 support") Signed-off-by: João H. Spies <[email protected]> Tested-by: Paul Cercueil <[email protected]> Reviewed-by: Paul Cercueil <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-06-24MIPS: dts: ocelot: describe the load/save GPIOQuentin Schulz1-1/+11
This patch adds a description of the load/save GPIN pin, used in the VSC8584 PHY for timestamping operations. The related pinctrl description is also added. Signed-off-by: Quentin Schulz <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+2
Pull kvm fixes from Paolo Bonzini: "All bugfixes except for a couple cleanup patches" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling KVM: X86: Fix MSR range of APIC registers in X2APIC mode KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL KVM: nVMX: Plumb L2 GPA through to PML emulation KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic() KVM: LAPIC: ensure APIC map is up to date on concurrent update requests kvm: lapic: fix broken vcpu hotplug Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU" KVM: VMX: Add helpers to identify interrupt type from intr_info kvm/svm: disable KCSAN for svm_vcpu_run() KVM: MIPS: Fix a build error for !CPU_LOONGSON64
2020-06-22MIPS: Loongson-2EF: disable fix-loongson3-llsc in compilerLichao Liu1-0/+22
Firstly, Loongson-2EF support ll/sc instructions, but doesn't need fix-loongson3-llsc compile option. Secondly, fix-loongson3-llsc will cause kernel startup fail at futex_init, because compiler will add 'sync' before 'll', which will affect __ex_table. futex_init will pass NULL uaddr parameter to futex_atomic_cmpxchg_inatomic. futex_atomic_cmpxchg_inatomic will access uaddr directly, which will cause page fault exception, the exception should be handled by __ex_table's nextinsn if the exception insn exsit in __ex_table. Because __ex_table is affected by compiler, the exception can not be handled, and futex_atomic_cmpxchg_inatomic will crash. Error code as below: __ex_table.insn = 1b, which is 'sync' compiled with fix-loongson3-llsc, but the actual exception instrction is ll. So, do_page_fault will not find the correct inst in __ex_table, and can not handle this exception. "1: "user_ll("%1", "%3")" \n" " bne %1, %z4, 3f \n" " .set pop \n" " move $1, %z5 \n" " .set "MIPS_ISA_ARCH_LEVEL" \n" "2: "user_sc("$1", "%2")" \n" " beqz $1, 1b \n" "3: " __SYNC_ELSE(full, loongson3_war, __WEAK_LLSC_MB) "\n" " .insn \n" " .set pop \n" " .section .fixup,\"ax\" \n" "4: li %0, %6 \n" " j 3b \n" " .previous \n" " .section __ex_table,\"a\" \n" " "__UA_ADDR "\t1b, 4b \n" " "__UA_ADDR "\t2b, 4b \n" " .previous Signed-off-by: Lichao Liu <[email protected]> Reviewed-by: Jiaxun Yang <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-06-19USB: OTG: rename product list of devicesGreg Kroah-Hartman2-2/+2
Rename the list of specific devices that an OTG device could support to make it more obvious as to what this list is for and what it is doing. Also rename the configuration option to make it more obvious as well. Cc: Thomas Bogendoerfer <[email protected]> Cc: Paul Burton <[email protected]> Cc: "Diego Elio Pettenò" <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Jiaxun Yang <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: "Philippe Mathieu-Daudé" <[email protected]> Cc: Alan Stern <[email protected]> Cc: Eugeniu Rosca <[email protected]> Cc: Qi Zhou <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Hardik Gajjar <[email protected]> Cc: Harry Pan <[email protected]> Cc: David Heinzelmann <[email protected]> Cc: Nishad Kamdar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-06-19USB: rename USB OTG hub configuration optionGreg Kroah-Hartman1-1/+1
The USB OTG code has the ability to disable external hubs, but the configuration option for it is oddly named. Rename it to be more obvious as to what it does. Cc: Thomas Bogendoerfer <[email protected]> Cc: Bin Liu <[email protected]> Cc: Paul Cercueil <[email protected]> Cc: Alan Stern <[email protected]> Cc: Eugeniu Rosca <[email protected]> Cc: Kai-Heng Feng <[email protected]> Cc: David Heinzelmann <[email protected]> Cc: "Lee, Chiasheng" <[email protected]> Cc: Keiya Nobuta <[email protected]> Cc: Hardik Gajjar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig1-3/+3
Better describe what these functions do. Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-06-17arch: wire-up close_range()Christian Brauner3-0/+3
This wires up the close_range() syscall into all arches at once. Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Reviewed-by: Oleg Nesterov <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Acked-by: Michael Ellerman <[email protected]> (powerpc) Cc: Jann Horn <[email protected]> Cc: David Howells <[email protected]> Cc: Dmitry V. Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Al Viro <[email protected]> Cc: Florian Weimer <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected]
2020-06-15MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias namesMartin Blumenstingl1-4/+4
The dt-bindings for the GSWIP describe that the node should be named "switch". Use the same name in sysctrl.c so the GSWIP driver can actually find the "gphy0" and "gphy1" clocks. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Cc: [email protected] Signed-off-by: Martin Blumenstingl <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-06-15MIPS: BCM63xx: add endif commentsÁlvaro Fernández Rojas1-18/+15
There are plenty of ifdefs in board_bcm963xx.c without endif comments. Let's make the code easier to follow by adding proper comments. Signed-off-by: Álvaro Fernández Rojas <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-06-15KVM: MIPS: Fix a build error for !CPU_LOONGSON64Huacai Chen1-0/+2
During the KVM merging progress, a CONFIG_CPU_LOONGSON64 guard in commit 7f2a83f1c2a941ebfee53 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3") is missing by accident. So add it to avoid building error. Fixes: 7f2a83f1c2a941ebfee53 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3") Reported-by: kernel test robot <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds2-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2-9/+9
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <[email protected]>
2020-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds17-167/+1086
Pull more KVM updates from Paolo Bonzini: "The guest side of the asynchronous page fault work has been delayed to 5.9 in order to sync with Thomas's interrupt entry rework, but here's the rest of the KVM updates for this merge window. MIPS: - Loongson port PPC: - Fixes ARM: - Fixes x86: - KVM_SET_USER_MEMORY_REGION optimizations - Fixes - Selftest fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits) KVM: x86: do not pass poisoned hva to __kvm_set_memory_region KVM: selftests: fix sync_with_host() in smm_test KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected KVM: async_pf: Cleanup kvm_setup_async_pf() kvm: i8254: remove redundant assignment to pointer s KVM: x86: respect singlestep when emulating instruction KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check KVM: nVMX: Consult only the "basic" exit reason when routing nested exit KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts KVM: arm64: Remove host_cpu_context member from vcpu structure KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr KVM: arm64: Handle PtrAuth traps early KVM: x86: Unexport x86_fpu_cache and make it static KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K KVM: arm64: Save the host's PtrAuth keys in non-preemptible context KVM: arm64: Stop save/restoring ACTLR_EL1 KVM: arm64: Add emulation for 32bit guests accessing ACTLR2 ...
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds2-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-09mmap locking API: convert mmap_sem API commentsMichel Lespinasse1-1/+1
Convert comments that reference old mmap_sem APIs to reference corresponding new mmap locking APIs instead. Signed-off-by: Michel Lespinasse <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Reviewed-by: Davidlohr Bueso <[email protected]> Reviewed-by: Daniel Jordan <[email protected]> Cc: David Rientjes <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Laurent Dufour <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ying Han <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mmap locking API: convert mmap_sem call sites missed by coccinelleMichel Lespinasse1-5/+5
Convert the last few remaining mmap_sem rwsem calls to use the new mmap locking API. These were missed by coccinelle for some reason (I think coccinelle does not support some of the preprocessor constructs in these files ?) [[email protected]: convert linux-next leftovers] [[email protected]: more linux-next leftovers] [[email protected]: more linux-next leftovers] Signed-off-by: Michel Lespinasse <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Daniel Jordan <[email protected]> Reviewed-by: Laurent Dufour <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: David Rientjes <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ying Han <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse2-4/+4
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Daniel Jordan <[email protected]> Reviewed-by: Laurent Dufour <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: David Rientjes <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ying Han <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: consolidate pte_index() and pte_offset_*() definitionsMike Rapoport4-65/+11
All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [[email protected]: v2] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: update] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: update] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: fix x86 warning] [[email protected]: fix powerpc build] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: pgtable: add shortcuts for accessing kernel PMD and PTEMike Rapoport5-28/+7
The powerpc 32-bit implementation of pgtable has nice shortcuts for accessing kernel PMD and PTE for a given virtual address. Make these helpers available for all architectures. [[email protected]: microblaze: fix page table traversal in setup_rt_frame()] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: s/pmd_ptr_k/pmd_off_k/ in various powerpc places] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport4-4/+4
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport5-6/+4
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport29-29/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09kernel: rename show_stack_loglvl() => show_stack()Dmitry Safonov1-7/+1
Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mips: add show_stack_loglvl()Dmitry Safonov1-17/+24
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/[email protected]/T/#u Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: James Hogan <[email protected]> Cc: Paul Burton <[email protected]> Cc: Ralf Baechle <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09kallsyms/printk: add loglvl to print_ip_sym()Dmitry Safonov1-2/+2
Patch series "Add log level to show_stack()", v3. Add log level argument to show_stack(). Done in three stages: 1. Introducing show_stack_loglvl() for every architecture 2. Migrating old users with an explicit log level 3. Renaming show_stack_loglvl() into show_stack() Justification: - It's a design mistake to move a business-logic decision into platform realization detail. - I have currently two patches sets that would benefit from this work: Removing console_loglevel jumps in sysrq driver [1] Hung task warning before panic [2] - suggested by Tetsuo (but he probably didn't realise what it would involve). - While doing (1), (2) the backtraces were adjusted to headers and other messages for each situation - so there won't be a situation when the backtrace is printed, but the headers are missing because they have lesser log level (or the reverse). - As the result in (2) plays with console_loglevel for kdb are removed. The least important for upstream, but maybe still worth to note that every company I've worked in so far had an off-list patch to print backtrace with the needed log level (but only for the architecture they cared about). If you have other ideas how you will benefit from show_stack() with a log level - please, reply to this cover letter. See also discussion on v1: https://lore.kernel.org/linux-riscv/[email protected]/ This patch (of 50): print_ip_sym() needs to have a log level parameter to comply with other parts being printed. Otherwise, half of the expected backtrace would be printed and other may be missing with some logging level. The following callee(s) are using now the adjusted log level: - microblaze/unwind: the same level as headers & userspace unwind. Note that pr_debug()'s there are for debugging the unwinder itself. - nds32/traps: symbol addresses are printed with the same log level as backtrace headers. - lockdep: ip for locking issues is printed with the same log level as other part of the warning. - sched: ip where preemption was disabled is printed as error like the rest part of the message. - ftrace: bug reports are now consistent in the log level being used. Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Cc: Albert Ou <[email protected]> Cc: Ben Segall <[email protected]> Cc: Dietmar Eggemann <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Hogan <[email protected]> Cc: Juri Lelli <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Burton <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vincent Guittot <[email protected]> Cc: Will Deacon <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Russell King <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: Mark Salter <[email protected]> Cc: Guo Ren <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Brian Cain <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Tony Luck <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Stefan Kristiansson <[email protected]> Cc: Helge Deller <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Rich Felker <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Anton Ivanov <[email protected]> Cc: Jeff Dike <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Max Filippov <[email protected]> Cc: Len Brown <[email protected]> Cc: Pavel Machek <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Douglas Anderson <[email protected]> Cc: Jason Wessel <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-07Merge tag 'tty-5.8-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the tty and serial driver updates for 5.8-rc1 Nothing huge at all, just a lot of little serial driver fixes, updates for new devices and features, and other small things. Full details are in the shortlog. All of these have been in linux-next with no issues for a while" * tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits) tty: serial: qcom_geni_serial: Add 51.2MHz frequency support tty: serial: imx: clear Ageing Timer Interrupt in handler serial: 8250_fintek: Add F81966 Support sc16is7xx: Add flag to activate IrDA mode dt-bindings: sc16is7xx: Add flag to activate IrDA mode serial: 8250: Support rs485 bus termination GPIO serial: 8520_port: Fix function param documentation dt-bindings: serial: Add binding for rs485 bus termination GPIO vt: keyboard: avoid signed integer overflow in k_ascii serial: 8250: Enable 16550A variants by default on non-x86 tty: hvc_console, fix crashes on parallel open/close serial: imx: Initialize lock for non-registered console sc16is7xx: Read the LSR register for basic device presence check sc16is7xx: Allow sharing the IRQ line sc16is7xx: Use threaded IRQ sc16is7xx: Always use falling edge IRQ tty: n_gsm: Fix bogus i++ in gsm_data_kick tty: n_gsm: Remove unnecessary test in gsm_print_packet() serial: stm32: add no_console_suspend support tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP ...
2020-06-04kmap: consolidate kmap_prot definitionsIra Weiny1-2/+0
Most architectures define kmap_prot to be PAGE_KERNEL. Let sparc and xtensa define there own and define PAGE_KERNEL as the default if not overridden. [[email protected]: coding style fixes] Suggested-by: Christoph Hellwig <[email protected]> Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Al Viro <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian König <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Max Filippov <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04arch/kmap: define kmap_atomic_prot() for all arch'sIra Weiny1-3/+3
To support kmap_atomic_prot(), all architectures need to support protections passed to their kmap_atomic_high() function. Pass protections into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to match. Then define kmap_atomic_prot() as a core function which calls kmap_atomic_high_prot() when needed. Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with the default kmap_prot exported by the architectures. Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian König <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Max Filippov <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04arch/kmap: don't hard code kmap_prot valuesIra Weiny1-1/+1
To support kmap_atomic_prot() on all architectures each arch must support protections passed in to them. Change csky, mips, nds32 and xtensa to use their global constant kmap_prot rather than a hard coded value which was equal. Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian König <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Max Filippov <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04arch/kunmap_atomic: consolidate duplicate codeIra Weiny3-11/+5
Every single architecture (including !CONFIG_HIGHMEM) calls... pagefault_enable(); preempt_enable(); ... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro. While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent. [[email protected]: don't enable pagefault/preempt twice] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: coding style fixes] Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian König <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Max Filippov <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Guenter Roeck <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04arch/kmap_atomic: consolidate duplicate codeIra Weiny3-18/+3
Every arch has the same code to ensure atomic operations and a check for !HIGHMEM page. Remove the duplicate code by defining a core kmap_atomic() which only calls the arch specific kmap_atomic_high() when the page is high memory. [[email protected]: coding style fixes] Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian König <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Max Filippov <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04arch/kunmap: remove duplicate kunmap implementationsIra Weiny2-12/+0
All architectures do exactly the same thing for kunmap(); remove all the duplicate definitions and lift the call to the core. This also has the benefit of changing kmap_unmap() on a number of architectures to be an inline call rather than an actual function. [[email protected]: fix CONFIG_HIGHMEM=n build on various architectures] Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian König <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Max Filippov <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04arch/kmap: remove redundant arch specific kmapsIra Weiny2-13/+5
The kmap code for all the architectures is almost 100% identical. Lift the common code to the core. Use ARCH_HAS_KMAP_FLUSH_TLB to indicate if an arch defines kmap_flush_tlb() and call if if needed. This also has the benefit of changing kmap() on a number of architectures to be an inline call rather than an actual function. Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian König <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Max Filippov <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04arch/kmap: remove BUG_ON()Ira Weiny1-1/+1
Patch series "Remove duplicated kmap code", v3. The kmap infrastructure has been copied almost verbatim to every architecture. This series consolidates obvious duplicated code by defining core functions which call into the architectures only when needed. Some of the k[un]map_atomic() implementations have some similarities but the similarities were not sufficient to warrant further changes. In addition we remove a duplicate implementation of kmap() in DRM. This patch (of 15): Replace the use of BUG_ON(in_interrupt()) in the kmap() and kunmap() in favor of might_sleep(). Besides the benefits of might_sleep(), this normalizes the implementations such that they can be made generic in subsequent patches. Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Dan Williams <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Cc: Christian König <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Helge Deller <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Max Filippov <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-04KVM: MIPS: Enable KVM support for Loongson-3Huacai Chen3-1/+3
This patch enable KVM support for Loongson-3 by selecting HAVE_KVM, but only enable KVM/VZ on Loongson-3A R4+ (because VZ of early processors are incomplete). Besides, Loongson-3 support SMP guests, so we clear the linked load bit of LLAddr in kvm_vz_vcpu_load() if the guest has more than one VCPUs. Acked-by: Thomas Bogendoerfer <[email protected]> Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Add more MMIO load/store instructions emulationHuacai Chen1-10/+470
This patch add more MMIO load/store instructions emulation, which can be observed in QXL and some other device drivers: 1, LWL, LWR, LDW, LDR, SWL, SWR, SDL and SDR for all MIPS; 2, GSLBX, GSLHX, GSLWX, GSLDX, GSSBX, GSSHX, GSSWX and GSSDX for Loongson-3. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Add CONFIG6 and DIAG registers emulationHuacai Chen4-1/+113
Loongson-3 has CONFIG6 and DIAG registers which need to be emulated. CONFIG6 is mostly used to enable/disable FTLB and SFB, while DIAG is mostly used to flush BTB, ITLB, DTLB, VTLB and FTLB. Acked-by: Thomas Bogendoerfer <[email protected]> Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Add CPUCFG emulation for Loongson-3Huacai Chen4-0/+92
Loongson-3 overrides lwc2 instructions to implement CPUCFG and CSR read/write functions. These instructions all cause guest exit so CSR doesn't benifit KVM guest (and there are always legacy methods to provide the same functions as CSR). So, we only emulate CPUCFG and let it return a reduced feature list (which means the virtual CPU doesn't have any other advanced features, including CSR) in KVM. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Add Loongson-3 Virtual IPI interrupt supportHuacai Chen5-1/+277
This patch add Loongson-3 Virtual IPI interrupt support in the kernel. The current implementation of IPI emulation in QEMU is based on GIC for MIPS, but Loongson-3 doesn't use GIC. Furthermore, IPI emulation in QEMU is too expensive for performance (because of too many context switches between Host and Guest). With current solution, the IPI delay may even cause RCU stall warnings in a multi-core Guest. So, we design a faster solution that emulate IPI interrupt in kernel (only used by Loongson-3 now). Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Add more types of virtual interruptsHuacai Chen4-133/+67
In current implementation, MIPS KVM uses IP2, IP3, IP4 and IP7 for external interrupt, two kinds of IPIs and timer interrupt respectively, but Loongson-3 based machines prefer to use IP2, IP3, IP6 and IP7 for two kinds of external interrupts, IPI and timer interrupt. So we define two priority-irq mapping tables: kvm_loongson3_priority_to_irq[] for Loongson-3, and kvm_default_priority_to_irq[] for others. The virtual interrupt infrastructure is updated to deliver all types of interrupts from IP2, IP3, IP4, IP6 and IP7. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Let indexed cacheops cause guest exit on Loongson-3Huacai Chen1-2/+6
Loongson-3's indexed cache operations need a node-id in the address, but in KVM guest the node-id may be incorrect. So, let indexed cache operations cause guest exit on Loongson-3. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Use root tlb to control guest's CCA for Loongson-3Huacai Chen1-0/+6
KVM guest has two levels of address translation: guest tlb translates GVA to GPA, and root tlb translates GPA to HPA. By default guest's CCA is controlled by guest tlb, but Loongson-3 maintains all cache coherency by hardware (including multi-core coherency and I/O DMA coherency) so it prefers all guest mappings be cacheable mappings. Thus, we use root tlb to control guest's CCA for Loongson-3. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Introduce and use cpu_guest_has_ldpteHuacai Chen3-14/+19
Loongson-3 has lddir/ldpte instructions and their related CP0 registers are the same as HTW. So we introduce a cpu_guest_has_ldpte flag and use it to indicate whether we need to save/restore HTW related CP0 registers (PWBase, PWSize, PWField and PWCtl). Acked-by: Thomas Bogendoerfer <[email protected]> Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Use lddir/ldpte instructions to lookup gpa_mm.pgdHuacai Chen1-1/+18
Loongson-3 can use lddir/ldpte instuctions to accelerate page table walking, so use them to lookup gpa_mm.pgd. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Add EVENTFD support which is needed by VHOSTHuacai Chen4-1/+8
Add EVENTFD support for KVM/MIPS, which is needed by VHOST. Tested on Loongson-3 platform. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Increase KVM_MAX_VCPUS and KVM_USER_MEM_SLOTS to 16Huacai Chen1-2/+2
Loongson-3 based machines can have as many as 16 CPUs, and so does memory slots, so increase KVM_MAX_VCPUS and KVM_USER_MEM_SLOTS to 16. Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Co-developed-by: Jiaxun Yang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Fix VPN2_MASK definition for variable cpu_vmbitsXing Li1-0/+4
If a CPU support more than 32bit vmbits (which is true for 64bit CPUs), VPN2_MASK set to fixed 0xffffe000 will lead to a wrong EntryHi in some functions such as _kvm_mips_host_tlb_inv(). The cpu_vmbits definition of 32bit CPU in cpu-features.h is 31, so we still use the old definition. Cc: Stable <[email protected]> Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Xing Li <[email protected]> [Huacai: Improve commit messages] Signed-off-by: Huacai Chen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-04KVM: MIPS: Define KVM_ENTRYHI_ASID to cpu_asid_mask(&boot_cpu_data)Xing Li1-1/+1
The code in decode_config4() of arch/mips/kernel/cpu-probe.c asid_mask = MIPS_ENTRYHI_ASID; if (config4 & MIPS_CONF4_AE) asid_mask |= MIPS_ENTRYHI_ASIDX; set_cpu_asid_mask(c, asid_mask); set asid_mask to cpuinfo->asid_mask. So in order to support variable ASID_MASK, KVM_ENTRYHI_ASID should also be changed to cpu_asid_mask(&boot_cpu_data). Cc: Stable <[email protected]> #4.9+ Reviewed-by: Aleksandar Markovic <[email protected]> Signed-off-by: Xing Li <[email protected]> [Huacai: Change current_cpu_data to boot_cpu_data for optimization] Signed-off-by: Huacai Chen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds6-16/+4
Merge more updates from Andrew Morton: "More mm/ work, plenty more to come Subsystems affected by this patch series: slub, memcg, gup, kasan, pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs, thp, mmap, kconfig" * akpm: (131 commits) arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined riscv: support DEBUG_WX mm: add DEBUG_WX support drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid() powerpc/mm: drop platform defined pmd_mknotpresent() mm: thp: don't need to drain lru cache when splitting and mlocking THP hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs sparc32: register memory occupied by kernel as memblock.memory include/linux/memblock.h: fix minor typo and unclear comment mm, mempolicy: fix up gup usage in lookup_node tools/vm/page_owner_sort.c: filter out unneeded line mm: swap: memcg: fix memcg stats for huge pages mm: swap: fix vmstats for huge pages mm: vmscan: limit the range of LRU type balancing mm: vmscan: reclaim writepage is IO cost mm: vmscan: determine anon/file pressure balance at the reclaim root mm: balance LRU lists based on relative thrashing mm: only count actual rotations as LRU reclaim cost ...
Powered by cgit, Gruvboxed by Blaster4385.