aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/netlogic/common
AgeCommit message (Collapse)AuthorFilesLines
2013-06-13MIPS: Netlogic: Remove workarounds for early SoCsJayachandran C1-22/+1
The XLPs in production do not need these workarounds. Remove the code and the associated ifdef. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5430/ Signed-off-by: Ralf Baechle <[email protected]>
2013-06-13MIPS: Netlogic: use branch instead of jumpJayachandran C2-2/+2
Fix an issue in the reset code. Since this code is copied to the reset vector, using 'j' for looping is not correct. Use relative branch 'b'. Update the usage of 'j' in smpboot.S to be consistent although it is not a bug there. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5427/ Signed-off-by: Ralf Baechle <[email protected]>
2013-06-13MIPS: Netlogic: move cpu_ready array to boot areaJayachandran C3-7/+10
Move the nlm_cpu_ready[] array used by the cpu wakeup code to the boot area, along with rest of the boot parameter code. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5425/ Signed-off-by: Ralf Baechle <[email protected]>
2013-06-13MIPS: Netlogic: Add nlm_get_boot_data() helperJayachandran C1-3/+3
This moves the calculation and casting needed to access the CPU initialization data to a function nlm_get_boot_data() Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5426/ Signed-off-by: Ralf Baechle <[email protected]>
2013-06-13MIPS: Netlogic: Initialization when !CONFIG_SMPJayachandran C2-7/+2
The core initialization and reset vector setup needs to be done even when booting uniprocessor. Move this code from smp.c to setup.c Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5428/ Signed-off-by: Ralf Baechle <[email protected]>
2013-06-13MIPS: Netlogic: Split reset code out of smpboot.SJayachandran C3-187/+251
The reset and core initialization code should be available for uniprocessor as well. This changes is just to take out the code into a different file, without any change to the logic. The change for uniprocessor initialization code is in a later patch. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5423/ Signed-off-by: Ralf Baechle <[email protected]>
2013-06-13MIPS: Netlogic: SWIOTLB dma ops for 32-bit DMAGanesan Ramalingam2-0/+108
Add SWIOTLB config option and related files to Netlogic platform. Some XLP SoC components like the SD/MMC interface cannot do DMA beyond 32-bit physical address. The SD/MMC driver can use memory outside this range for IO, to support this we have to add bounce buffers implemented by SWIOTLB. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Cc: Ganesan Ramalingam <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/5410/ Signed-off-by: Ralf Baechle <[email protected]>
2013-05-08MIPS: Netlogic: print cpumask with cpumask_scnprintfJayachandran C1-9/+12
Use standard function to print cpumask. Also fixup the name of the variable used and make it static. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/5024/ Acked-by: John Crispin <[email protected]>
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle4-29/+82
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-17MIPS: Netlogic: use preset loops per jiffyJayachandran C1-0/+4
Doing calibrate delay on a hardware thread will be inaccurate since it depends on the load on other threads in the core. It will also slow down the boot process when done for 128 hardware threads. Switch to a pre-computed loops per jiffy based on the core frequency. The value is computed based on the core frequency and roughly matches the value calculated by calibrate_delay(). Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4791/ Signed-off-by: John Crispin <[email protected]>
2013-02-17MIPS: Netlogic: Use PIC timer as a clocksourceJayachandran C2-1/+53
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC frequencey. One of these can be used as a clocksource to provide timestamps that is common across cores. This can be used in place of the count/compare clocksource which is per-CPU. On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits of the PIC counter. On XLP, the whole 64-bit can be used. Provide common macros and functions for PIC timer registers on XLR/XLS and XLP, and use them to register a PIC clocksource. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4786/ Signed-off-by: John Crispin <[email protected]>
2013-02-17MIPS: Netlogic: Split XLP L1 i-cache among threadsJayachandran C1-0/+6
Since we now use r4k cache code for Netlogic XLP, it is better to split L1 icache among the active threads, so that threads won't step on each other while flushing icache. The L1 dcache is already split among the threads in the core. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4787/ Signed-off-by: John Crispin <[email protected]>
2013-02-17MIPS: Netlogic: Optimize EIMR/EIRR accesses in 32-bitJayachandran C2-28/+19
Provide functions ack_c0_eirr(), set_c0_eimr(), clear_c0_eimr() and read_c0_eirr_and_eimr() that do the EIMR and EIRR operations and update the interrupt handling code to use these functions. Also, use the EIMR register functions to mask interrupts in the irq code. The 64-bit interrupt request and mask registers (EIRR and EIMR) are accessed when the interrupts are off, and the common operations are to set or clear a bit in these registers. Using the 64-bit c0 access functions for these operations is not optimal in 32-bit, because it will disable/restore interrupts and split/join the 64-bit value during each register access. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4790/ Signed-off-by: John Crispin <[email protected]>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle2-9/+9
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <[email protected]>
2012-11-09MIPS: Netlogic: Support for XLR/XLS Fast Message NetworkGanesan Ramalingam2-5/+7
On XLR/XLS, the cpu cores communicate with fast on-chip devices (e.g. network accelerator, security engine etc.) using the Fast Messaging Network(FMN). The FMN queues and credits needs to be configured and intialized before it can be used. The co-processor 2 on XLR/XLS CPU cores has registers for FMN access, and the XLR/XLS has custom instructions for sending and loading messages. The FMN can deliver also per-cpu interrupts when messages are available at the CPU. This patch adds FMN initialization, adds interrupt setup and handling, and also provides support for sending and receiving FMN messages. Signed-off-by: Ganesan Ramalingam <[email protected]> Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4468 Signed-off-by: John Crispin <[email protected]>
2012-11-09MIPS: Netlogic: PIC IRQ handling update for multi-chipJayachandran C2-75/+102
Create struct nlm_pic_irq for interrupts handled by the PIC. This simplifies IRQ handling for multi-SoC as well as the single SoC cases. Also split the setup of percpu and PIC interrupts so that we can configure the PIC interrupts for every node. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4467 Signed-off-by: John Crispin <[email protected]>
2012-11-09MIPS: Netlogic: Support for multi-chip configurationJayachandran C2-37/+65
Upto 4 Netlogic XLP SoCs can be connected over ICI links to form a coherent multi-node system. Each SoC has its own set of on-chip devices including PIC. To support this, add a per SoC stucture and use it for the PIC and SYS block addresses instead of using global variables. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4469 Signed-off-by: John Crispin <[email protected]>
2012-11-09MIPS: Netlogic: Move from u32 cpumask to cpumask_tJayachandran C1-19/+20
Initial code to support more than 32 cpus. The platform CPU mask is updated from 32-bit mask to cpumask_t. Convert places that use cpu_/cpus_ functions to use cpumask_* functions. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4464 Signed-off-by: John Crispin <[email protected]>
2012-11-09MIPS: Netlogic: Pass cpuid to early_init_secondaryJayachandran C2-2/+4
The cpuid was not passed into early_init_secondary even though the comment indicated that it will be. Fix this. Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4458 Signed-off-by: John Crispin <[email protected]>
2012-11-09MIPS: Netlogic: Enable SUE bit in coresJayachandran C1-1/+1
Enable Speculative Unmap Enable bit, which will enable speculative L2 cache requests for unmapped memory. This should give better performance for kernel code/data which is in KSEG0 Signed-off-by: Jayachandran C <[email protected]> Patchwork: http://patchwork.linux-mips.org/patch/4461 Signed-off-by: John Crispin <[email protected]>
2012-07-24MIPS: Netlogic: early console fixJayachandran C1-1/+1
In prom_putchar(), wait for just the TX empty bit to clear in the UART LSR. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Cc: Florian Fainelli <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/4112/ Signed-off-by: Ralf Baechle <[email protected]>
2012-07-24MIPS: Netlogic: Fix indentation of smpboot.SJayachandran C1-4/+4
[[email protected]: I've folded most segments of this patch into those patches in -next that originally were causing the whitespace damage. This is just what's left over] Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/4094/ Signed-off-by: Ralf Baechle <[email protected]>
2012-07-24MIPS: Netlogic: SMP wakeup code updateJayachandran C1-5/+42
Update for core intialization code. Initialize status register after receiving NMI for CPU wakeup. Add the low level L1D flush code before enabling threads in core. Also convert the ehb to _ehb so that it works under more GCC versions. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/3755/ Patchwork: https://patchwork.linux-mips.org/patch/4095/ Signed-off-by: Ralf Baechle <[email protected]>
2012-07-24MIPS: Netlogic: Update comments in smpboot.SJayachandran C1-48/+58
No change in logic, comments update and whitespace cleanup. * A few comments in the file were in assembler style and the rest int C style, convert all of them to C style. * Mark workarounds for Ax silicon with a macro XLP_AX_WORKAROUND * Whitespace fixes - use tabs consistently * rename __config_lsu macro to xlp_config_lsu Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/3749/ Signed-off-by: Ralf Baechle <[email protected]>
2012-03-29remove references to cpu_*_map in arch/Rusty Russell1-3/+3
This has been obsolescent for a while; time for the final push. In adjacent context, replaced old cpus_* with cpumask_*. Signed-off-by: Rusty Russell <[email protected]> Acked-by: David S. Miller <[email protected]> (arch/sparc) Acked-by: Chris Metcalf <[email protected]> (arch/tile) Cc: [email protected] Cc: Russell King <[email protected]> Cc: [email protected] Cc: Richard Kuo <[email protected]> Cc: [email protected] Cc: Ralf Baechle <[email protected]> Cc: [email protected] Cc: Kyle McMartin <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected]
2012-03-28Disintegrate asm/system.h for MIPSDavid Howells1-1/+0
Disintegrate asm/system.h for MIPS. Signed-off-by: David Howells <[email protected]> Acked-by: Ralf Baechle <[email protected]> cc: [email protected]
2011-12-07MIPS: Netlogic: Mark Netlogic chips as SMT capableHillf Danton1-4/+7
Netlogic XLR chip has multiple cores. Each core includes four integrated hardware threads, and they share L1 data and instruction caches. If the chip is marked to be SMT capable, scheduler then could do more, say, idle load balancing. Changes are now confined only to the code of XLR, and hardware is probed to get core ID for correct setup. [jayachandranc: simplified and adapted for new merged XLR/XLP code] Signed-off-by: Hillf Danton <[email protected]> Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2972/ Signed-off-by: Ralf Baechle <[email protected]>
2011-12-07MIPS: Netlogic: Merge some of XLR/XLP wakup codeJayachandran C3-3/+346
Create a common NMI and reset handler in smpboot.S and use this for both XLR and XLP. In the earlier code, the woken up CPUs would busy wait until released, switch this to wakeup by NMI. The initial wakeup code or XLR and XLP are differ since they are started from different bootloaders (XLP from u-boot and XLR from netlogic bootloader). But in both platforms the woken up CPUs wait and are released by sending an NMI. Add support for starting XLR and XLP in 1/2/4 threads per core. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2970/ Signed-off-by: Ralf Baechle <[email protected]>
2011-12-07MIPS: Netlogic: Add XLP platform files for XLP SoCJayachandran C3-4/+29
- Update common files to support XLP. - Add arch/mips/include/asm/netlogic/xlp-hal for register definitions and access macros - Add arch/mips/netlogic/xlp/ for XLP specific files. Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2967/ Signed-off-by: Ralf Baechle <[email protected]>
2011-12-07MIPS: Netlogic: Move code common with XLP to common/Jayachandran C5-0/+523
- Move code that can be shared with XLP (irq.c, smp.c, time.c and xlr_console.c) to arch/mips/netlogic/common - Add asm/netlogic/haldefs.h and asm/netlogic/common.h for common and io functions shared with XLP - remove type 'nlm_reg_t *' and use uint64_t for mmio offsets - Move XLR specific code in smp.c to xlr/wakeup.c - Move XLR specific PCI code from irq.c to mips/pci/pci-xlr.c - Provide API for pic functions called from common/irq.c Signed-off-by: Jayachandran C <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2964/ Signed-off-by: Ralf Baechle <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.