| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A collection of MIPS fixes:
- Fill the struct cacheinfo shared_cpu_map field with sensible
values, notably avoiding issues with perf which was unhappy in the
absence of these values.
- A boot fix for Loongson 2E & 2F machines which was fallout from
some refactoring performed this cycle.
- A Kconfig dependency fix for the Loongson CPU HWMon driver.
- A couple of VDSO fixes, ensuring gettimeofday() behaves
appropriately for kernel configurations that don't include support
for a clocksource the VDSO can use & fixing the calling convention
for the n32 & n64 VDSOs which would previously clobber the $gp/$28
register.
- A build fix for vmlinuz compressed images which were
inappropriately building with -fsanitize-coverage despite not being
part of the kernel proper, then failing to link due to the missing
__sanitizer_cov_trace_pc() function.
- A couple of eBPF JIT fixes, including disabling it for MIPS32 due
to a large number of issues with the code generated there &
reflecting ISA dependencies in Kconfig to enforce that systems
which don't support the JIT must include the interpreter"
* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Avoid VDSO ABI breakage due to global register variable
MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
MIPS: BPF: Disable MIPS32 eBPF JIT
MIPS: Prevent link failure with kcov instrumentation
MIPS: Kconfig: Use correct form for 'depends on'
mips: Fix gettimeofday() in the vdso library
MIPS: Fix boot on Fuloong2 systems
mips: cacheinfo: report shared CPU map
|
|
It is completely wrong to check for compile-time MIPS ISA revision in
the body of bpf_int_jit_compile() as it may lead to get MIPS JIT fully
omitted by the CC while the rest system will think that the JIT is
actually present and works [1].
We can check if the selected CPU really supports MIPS eBPF JIT at
configure time and avoid such situations when kernel can be built
without both JIT and interpreter, but with CONFIG_BPF_SYSCALL=y.
[1] https://lore.kernel.org/linux-mips/[email protected]/
Fixes: 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.")
Cc: <[email protected]> # v5.2+
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Hassan Naveed <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <[email protected]>
Signed-off-by: Paul Chaignon <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Armijn Hemel <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Pull MIPS updates from Paul Burton:
- A set of memblock initialization improvements thanks to Serge Semin,
tidying up after our conversion from bootmem to memblock back in
v4.20.
- Our eBPF JIT the previously supported only MIPS64r2 through MIPS64r5
is improved to also support MIPS64r6. Support for MIPS32 systems is
introduced, with the caveat that it only works for programs that
don't use 64 bit registers or operations - those will bail out & need
to be interpreted.
- Improvements to the allocation & configuration of our exception
vector that should fix issues seen on some platforms using recent
versions of U-Boot.
- Some minor improvements to code generated for jump labels, along with
enabling them by default for generic kernels.
* tag 'mips_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (27 commits)
mips: Manually call fdt_init_reserved_mem() method
mips: Make sure dt memory regions are valid
mips: Perform early low memory test
mips: Dump memblock regions for debugging
mips: Add reserve-nomap memory type support
mips: Use memblock to reserve the __nosave memory range
mips: Discard post-CMA-init foreach loop
mips: Reserve memory for the kernel image resources
MIPS: Remove duplicate EBase configuration
MIPS: Sync icache for whole exception vector
MIPS: Always allocate exception vector for MIPSr2+
MIPS: Use memblock_phys_alloc() for exception vector
mips: Combine memblock init and memory reservation loops
mips: Discard rudiments from bootmem_init
mips: Make sure kernel .bss exists in boot mem pool
mips: vdso: drop unnecessary cc-ldoption
Revert "MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices"
MIPS: generic: Enable CONFIG_JUMP_LABEL
MIPS: jump_label: Use compact branches for >= r6
MIPS: jump_label: Remove redundant nops
...
|
|
Fix sparse warning:
arch/mips/net/ebpf_jit.c:196:5: warning:
symbol 'ebpf_to_mips_reg' was not declared. Should it be static?
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently MIPS32 supports a JIT for classic BPF only, not extended BPF.
This patch adds JIT support for extended BPF on MIPS32, so code is
actually JIT'ed instead of being only interpreted. Instructions with
64-bit operands are not supported at this point.
We can delete classic BPF because the kernel will translate classic BPF
programs into extended BPF and JIT them, eliminating the need for
classic BPF.
Signed-off-by: Hassan Naveed <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: open list:MIPS <[email protected]>
Cc: open list <[email protected]>
|
|
Currently eBPF support is available on MIPS64R2 only. Use MIPS64R6
variants of instructions like multiply, divide, movn, movz so eBPF
can run on the newer ISA. Also, we only need to check ISA revision
before JIT'ing code, because we know the CPU is running a 64-bit
kernel because eBPF JIT is only included in kernels with CONFIG_64BIT=y
due to Kconfig dependencies.
Signed-off-by: Hassan Naveed <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: open list:MIPS <[email protected]>
Cc: open list <[email protected]>
|
|
The MIPS eBPF JIT calls flush_icache_range() in order to ensure the
icache observes the code that we just wrote. Unfortunately it gets the
end address calculation wrong due to some bad pointer arithmetic.
The struct jit_ctx target field is of type pointer to u32, and as such
adding one to it will increment the address being pointed to by 4 bytes.
Therefore in order to find the address of the end of the code we simply
need to add the number of 4 byte instructions emitted, but we mistakenly
add the number of instructions multiplied by 4. This results in the call
to flush_icache_range() operating on a memory region 4x larger than
intended, which is always wasteful and can cause crashes if we overrun
into an unmapped page.
Fix this by correcting the pointer arithmetic to remove the bogus
multiplication, and use braces to remove the need for a set of brackets
whilst also making it obvious that the target field is a pointer.
Signed-off-by: Paul Burton <[email protected]>
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v4.13+
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
REG_32BIT_ZERO_EX and REG_64BIT are always handled in exactly the same
way, and reg_val_propagate_range() never actually sets any register to
type REG_32BIT_ZERO_EX.
Remove the redundant & unused REG_32BIT_ZERO_EX.
Signed-off-by: Paul Burton <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.
This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:
test_bpf: #65 ALU64_MOV_X:
dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)
Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.
We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.
Signed-off-by: Paul Burton <[email protected]>
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc: [email protected] # v4.13+
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Jitting of BPF_K is supported already, but not BPF_X. This patch complete
the support for the latter on both MIPS and microMIPS.
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Acked-by: Paul Burton <[email protected]>
Signed-off-by: Jiong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The ool_skb_header_pointer() and size_to_len() is unused same as
tmp_offset, therefore remove all of them.
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from mips64 JIT.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The verifier in both cBPF and eBPF reject div/mod by 0 imm,
so this can never load. Remove emitting such test and reject
it from being JITed instead (the latter is actually also not
needed, but given practice in sparc64, ppc64 today, so
doesn't hurt to add it here either).
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: David Daney <[email protected]>
Reviewed-by: David Daney <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from mips64 JIT.
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: David Daney <[email protected]>
Reviewed-by: David Daney <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
global bpf_jit_enable variable is tested multiple times in JITs,
blinding and verifier core. The malicious root can try to toggle
it while loading the programs. This race condition was accounted
for and there should be no issues, but it's safer to avoid
this race condition.
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Fix a typo in build_one_insn().
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Signed-off-by: Wei Yongjun <[email protected]>
Cc: <[email protected]> # 4.13+
Patchwork: https://patchwork.linux-mips.org/patch/17491/
Signed-off-by: James Hogan <[email protected]>
|
|
Compiling ebpf_jit.c with gcc 4.9 results in a (likely spurious)
compiler warning, as gcc has detected that the variable "target" may be
used uninitialised. Since -Werror is active, this is treated as an error
and causes a kernel build failure whenever CONFIG_MIPS_EBPF_JIT is
enabled.
arch/mips/net/ebpf_jit.c: In function 'build_one_insn':
arch/mips/net/ebpf_jit.c:1118:80: error: 'target' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
emit_instr(ctx, j, target);
^
cc1: all warnings being treated as errors
Fix this by initialising "target" to 0. If it really is used
uninitialised this would result in a jump to 0 and a detectable run time
failure.
Signed-off-by: Matt Redfearn <[email protected]>
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc: James Hogan <[email protected]>
Cc: David Daney <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # v4.13+
Patchwork: https://patchwork.linux-mips.org/patch/17375/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
There is a missing break causing a fall-through and setting
ctx.use_bbit_insns to the wrong value. Fix this by adding the
missing break.
Detected with cppcheck:
"Variable 'ctx.use_bbit_insns' is reassigned a value before the old
one has been used. 'break;' missing?"
Fixes: 8d8d18c3283f ("MIPS,bpf: Fix using smp_processor_id() in preemptible splat.")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: David Daney <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The code looks a little cleaner if we replace BPF_OP(insn->code) with
the local variable bpf_op. Caching the value this way also saves 300
bytes (about 1%) in the code size of the JIT.
Signed-off-by: David Daney <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: David Daney <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If the kernel is configured with preemption enabled we were getting
warning stack traces for use of current_cpu_type().
Fix by moving the test between preempt_disable()/preempt_enable() and
caching the results of the CPU type tests for use during code
generation.
Signed-off-by: David Daney <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Inexplicably, commit f381bf6d82f0 ("MIPS: Add support for eBPF JIT.")
lost a file somewhere on its path to Linus' tree. Add back the
missing ebpf_jit.c so that we can build with CONFIG_BPF_JIT selected.
This version of ebpf_jit.c is identical to the original except for two
minor change need to resolve conflicts with changes merged from the
BPF branch:
A) Set prog->jited_len = image_size;
B) Use BPF_TAIL_CALL instead of BPF_CALL | BPF_X
Fixes: f381bf6d82f0 ("MIPS: Add support for eBPF JIT.")
Signed-off-by: David Daney <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|