aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/kernel
AgeCommit message (Collapse)AuthorFilesLines
2017-05-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-2/+12
Pull KVM updates from Paolo Bonzini: "ARM: - HYP mode stub supports kexec/kdump on 32-bit - improved PMU support - virtual interrupt controller performance improvements - support for userspace virtual interrupt controller (slower, but necessary for KVM on the weird Broadcom SoCs used by the Raspberry Pi 3) MIPS: - basic support for hardware virtualization (ImgTec P5600/P6600/I6400 and Cavium Octeon III) PPC: - in-kernel acceleration for VFIO s390: - support for guests without storage keys - adapter interruption suppression x86: - usual range of nVMX improvements, notably nested EPT support for accessed and dirty bits - emulation of CPL3 CPUID faulting generic: - first part of VCPU thread request API - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits) kvm: nVMX: Don't validate disabled secondary controls KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick Revert "KVM: Support vCPU-based gfn->hva cache" tools/kvm: fix top level makefile KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING KVM: Documentation: remove VM mmap documentation kvm: nVMX: Remove superfluous VMX instruction fault checks KVM: x86: fix emulation of RSM and IRET instructions KVM: mark requests that need synchronization KVM: return if kvm_vcpu_wake_up() did wake up the VCPU KVM: add explicit barrier to kvm_vcpu_kick KVM: perform a wake_up in kvm_make_all_cpus_request KVM: mark requests that do not need a wakeup KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up KVM: x86: always use kvm_make_request instead of set_bit KVM: add kvm_{test,clear}_request to replace {test,clear}_bit s390: kvm: Cpu model support for msa6, msa7 and msa8 KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK kvm: better MWAIT emulation for guests KVM: x86: virtualize cpuid faulting ...
2017-05-01Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - unwinder fixes and enhancements - improve ftrace interaction with the unwinder - optimize the code footprint of WARN() and related debugging constructs - ... plus misc updates, cleanups and fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/unwind: Dump all stacks in unwind_dump() x86/unwind: Silence more entry-code related warnings x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder x86/unwind: Remove unused 'sp' parameter in unwind_dump() x86/unwind: Prepend hex mask value with '0x' in unwind_dump() x86/unwind: Properly zero-pad 32-bit values in unwind_dump() x86/unwind: Ensure stack pointer is aligned debug: Avoid setting BUGFLAG_WARNING twice x86/unwind: Silence entry-related warnings x86/unwind: Read stack return address in update_stack_state() x86/unwind: Move common code into update_stack_state() debug: Fix __bug_table[] in arch linker scripts debug: Add _ONCE() logic to report_bug() x86/debug: Define BUG() again for !CONFIG_BUG x86/debug: Implement __WARN() using UD0 x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set x86/ftrace: Clean up ftrace_regs_caller x86/ftrace: Add stack frame pointer to ftrace_caller x86/ftrace: Move the ftrace specific code out of entry_32.S ...
2017-05-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds5-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement delivers: - more year 2038 rework - a massive rework of the arm achitected timer - preparatory patches to allow NTP correction of clock event devices to avoid early expiry - the usual pile of fixes and enhancements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) timer/sysclt: Restrict timer migration sysctl values to 0 and 1 arm64/arch_timer: Mark errata handlers as __maybe_unused Clocksource/mips-gic: Remove redundant non devicetree init MIPS/Malta: Probe gic-timer via devicetree clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver clocksource: arm_arch_timer: add GTDT support for memory-mapped timer acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource: arm_arch_timer: simplify ACPI support code. acpi/arm64: Add GTDT table parse driver clocksource: arm_arch_timer: split MMIO timer probing. clocksource: arm_arch_timer: add structs to describe MMIO timer clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call clocksource: arm_arch_timer: refactor arch_timer_needs_probing clocksource: arm_arch_timer: split dt-only rate handling x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks um/time: Set ->min_delta_ticks and ->max_delta_ticks tile/time: Set ->min_delta_ticks and ->max_delta_ticks score/time: Set ->min_delta_ticks and ->max_delta_ticks ...
2017-05-01Merge branch 'work.uaccess' of ↵Linus Torvalds3-18/+18
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess unification updates from Al Viro: "This is the uaccess unification pile. It's _not_ the end of uaccess work, but the next batch of that will go into the next cycle. This one mostly takes copy_from_user() and friends out of arch/* and gets the zero-padding behaviour in sync for all architectures. Dealing with the nocache/writethrough mess is for the next cycle; fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am sold on access_ok() in there, BTW; just not in this pile), same for reducing __copy_... callsites, strn*... stuff, etc. - there will be a pile about as large as this one in the next merge window. This one sat in -next for weeks. -3KLoC" * 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits) HAVE_ARCH_HARDENED_USERCOPY is unconditional now CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now m32r: switch to RAW_COPY_USER hexagon: switch to RAW_COPY_USER microblaze: switch to RAW_COPY_USER get rid of padding, switch to RAW_COPY_USER ia64: get rid of copy_in_user() ia64: sanitize __access_ok() ia64: get rid of 'segment' argument of __do_{get,put}_user() ia64: get rid of 'segment' argument of __{get,put}_user_check() ia64: add extable.h powerpc: get rid of zeroing, switch to RAW_COPY_USER esas2r: don't open-code memdup_user() alpha: fix stack smashing in old_adjtimex(2) don't open-code kernel_setsockopt() mips: switch to RAW_COPY_USER mips: get rid of tail-zeroing in primitives mips: make copy_from_user() zero tail explicitly mips: clean and reorder the forest of macros... mips: consolidate __invoke_... wrappers ...
2017-04-14MIPS: clockevent drivers: Set ->min_delta_ticks and ->max_delta_ticksNicolai Stange5-0/+10
In preparation for making the clockevents core NTP correction aware, all clockevent device drivers must set ->min_delta_ticks and ->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a clockevent device's rate is going to change dynamically and thus, the ratio of ns to ticks ceases to stay invariant. Make the MIPS arch's clockevent drivers initialize these fields properly. This patch alone doesn't introduce any change in functionality as the clockevents core still looks exclusively at the (untouched) ->min_delta_ns and ->max_delta_ns. As soon as this has changed, a followup patch will purge the initialization of ->min_delta_ns and ->max_delta_ns from these drivers. Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: John Crispin <john@phrozen.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-04-13Merge branch '4.11-fixes' into mips-for-linux-nextRalf Baechle6-24/+42
2017-04-12MIPS: Stengthen IPI IRQ domain sanity checkPaul Burton1-8/+12
Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced a sanity check that an IPI IRQ domain can be found during boot, in order to ensure that IPIs are able to be set up in systems using such domains. However it was added at a point where systems may have used an IPI IRQ domain in some situations but not others, and we could not know which were the case until runtime, so commit 578bffc82ec5 ("MIPS: Don't BUG_ON when no IPI domain is found") made that check simply skip IPI init if no domain were found in order to fix the boot for systems such as QEMU Malta. We now use IPI IRQ domains for the MIPS CPU interrupt controller, which means systems which make use of IPI IRQ domains will always do so when running on multiple CPUs. As a result we now strengthen the sanity check to ensure that an IPI IRQ domain is found when multiple CPUs are present in the system. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain supportPaul Burton1-45/+4
Remove the smp-mt IPI code that supported single-core multithreaded systems and instead make use of the IPI IRQ domain support provided by the MIPS CPU interrupt controller driver. This removes some less than nice code, the horrible split between arch & board code and the duplication that led to within board code. The lantiq portion of this patch has only been compile tested. Malta has been tested & is functional. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15837/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: KGDB: Use kernel context for sleeping threadsJames Hogan1-15/+33
KGDB is a kernel debug stub and it can't be used to debug userland as it can only safely access kernel memory. On MIPS however KGDB has always got the register state of sleeping processes from the userland register context at the beginning of the kernel stack. This is meaningless for kernel threads (which never enter userland), and for user threads it prevents the user seeing what it is doing while in the kernel: (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () 2 Thread 1 (init) 0x000000007705c4b4 in ?? () 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Get the register state instead from the (partial) kernel register context stored in the task's thread_struct for resume() to restore. All threads now correctly appear to be in context_switch(): (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 2 Thread 1 (init) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Call clobbered registers which aren't saved and exception registers (BadVAddr & Cause) which can't be easily determined without stack unwinding are reported as 0. The PC is taken from the return address, such that the state presented matches that found immediately after returning from resume(). Fixes: 8854700115ec ("[MIPS] kgdb: add arch support for the kernel's kgdb core") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15829/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: smp-cps: Fix potentially uninitialised value of coreMatt Redfearn1-2/+1
Turning on DEBUG in smp-cps.c, or compiling the kernel with CONFIG_DYNAMIC_DEBUG enabled results the build error: arch/mips/kernel/smp-cps.c: In function 'play_dead': ./include/linux/dynamic_debug.h:126:3: error: 'core' may be used uninitialized in this function [-Werror=maybe-uninitialized] Fix this by always initialising the variable. Fixes: 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processors") Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: KASLR: Add missing header filesMatt Redfearn1-1/+1
After the split of linux/sched.h, KASLR stopped building. Fix this by including the correct header file for init_thread_union Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Steven J. Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15849/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: Avoid BUG warning in arch_check_elfJames Cowgill1-1/+1
arch_check_elf contains a usage of current_cpu_data that will call smp_processor_id() with preemption enabled and therefore triggers a "BUG: using smp_processor_id() in preemptible" warning when an fpxx executable is loaded. As a follow-up to commit b244614a60ab ("MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by using raw_current_cpu_data instead. The rationale quoted from the previous commit: "It is assumed throughout the kernel that if any CPU has an FPU, then all CPUs would have an FPU as well, so it is safe to perform the check with preemption enabled - change the code to use raw_ variant of the check to avoid the warning." Fixes: 46490b572544 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> CC: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15951/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: Opt into HAVE_COPY_THREAD_TLSJames Cowgill1-3/+3
This the mips version of commit c1bd55f922a2d ("x86: opt into HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit"). Simply use the tls system call argument instead of extracting the tls argument by magic from the pt_regs structure. See commit 3033f14ab78c3 ("clone: support passing tls argument via C rather than pt_regs magic") for more background. Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: Remove dead define of ST_OFFMatt Redfearn1-6/+0
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed the last usage of the macro ST_OFF. Remove the dead code. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15898/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-12MIPS: Use common outgoing-CPU-notification codeMarcin Nowakowski1-4/+3
Replace the open-coded CPU-offline notification with common code. In particular avoid calling scheduler code using RCU from an offline CPU that RCU is ignoring. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15921/ Patchwork: https://patchwork.linux-mips.org/patch/15953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10MIPS: cevt-r4k: Fix out-of-bounds array accessJames Hogan1-1/+1
calculate_min_delta() may incorrectly access a 4th element of buf2[] which only has 3 elements. This may trigger undefined behaviour and has been reported to cause strange crashes in start_kernel() sometime after timer initialization when built with GCC 5.3, possibly due to register/stack corruption: sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns CPU 0 Unable to handle kernel paging request at virtual address ffffb0aa, epc == 8067daa8, ra == 8067da84 Oops[#1]: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #51 task: 8065e3e0 task.stack: 80644000 $ 0 : 00000000 00000001 00000000 00000000 $ 4 : 8065b4d0 00000000 805d0000 00000010 $ 8 : 00000010 80321400 fffff000 812de408 $12 : 00000000 00000000 00000000 ffffffff $16 : 00000002 ffffffff 80660000 806a666c $20 : 806c0000 00000000 00000000 00000000 $24 : 00000000 00000010 $28 : 80644000 80645ed0 00000000 8067da84 Hi : 00000000 Lo : 00000000 epc : 8067daa8 start_kernel+0x33c/0x500 ra : 8067da84 start_kernel+0x318/0x500 Status: 11000402 KERNEL EXL Cause : 4080040c (ExcCode 03) BadVA : ffffb0aa PrId : 0501992c (MIPS 1004Kc) Modules linked in: Process swapper/0 (pid: 0, threadinfo=80644000, task=8065e3e0, tls=00000000) Call Trace: [<8067daa8>] start_kernel+0x33c/0x500 Code: 24050240 0c0131f9 24849c64 <a200b0a8> 41606020 000000c0 0c1a45e6 00000000 0c1a5f44 UBSAN also detects the same issue: ================================================================ UBSAN: Undefined behaviour in arch/mips/kernel/cevt-r4k.c:85:41 load of address 80647e4c with insufficient space for an object of type 'unsigned int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #47 Call Trace: [<80028f70>] show_stack+0x88/0xa4 [<80312654>] dump_stack+0x84/0xc0 [<8034163c>] ubsan_epilogue+0x14/0x50 [<803417d8>] __ubsan_handle_type_mismatch+0x160/0x168 [<8002dab0>] r4k_clockevent_init+0x544/0x764 [<80684d34>] time_init+0x18/0x90 [<8067fa5c>] start_kernel+0x2f0/0x500 ================================================================= buf2[] is intentionally only 3 elements so that the last element is the median once 5 samples have been inserted, so explicitly prevent the possibility of comparing against the 4th element rather than extending the array. Fixes: 1fa405552e33f2 ("MIPS: cevt-r4k: Dynamically calculate min_delta_ns") Reported-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Rabin Vincent <rabinv@axis.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.7.x- Patchwork: https://patchwork.linux-mips.org/patch/15892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10MIPS: perf: fix deadlockRabin Vincent1-4/+5
mipsxx_pmu_handle_shared_irq() calls irq_work_run() while holding the pmuint_rwlock for read. irq_work_run() can, via perf_pending_event(), call try_to_wake_up() which can try to take rq->lock. However, perf can also call perf_pmu_enable() (and thus take the pmuint_rwlock for write) while holding the rq->lock, from finish_task_switch() via perf_event_context_sched_in(). This leads to an ABBA deadlock: PID: 3855 TASK: 8f7ce288 CPU: 2 COMMAND: "process" #0 [89c39ac8] __delay at 803b5be4 #1 [89c39ac8] do_raw_spin_lock at 8008fdcc #2 [89c39af8] try_to_wake_up at 8006e47c #3 [89c39b38] pollwake at 8018eab0 #4 [89c39b68] __wake_up_common at 800879f4 #5 [89c39b98] __wake_up at 800880e4 #6 [89c39bc8] perf_event_wakeup at 8012109c #7 [89c39be8] perf_pending_event at 80121184 #8 [89c39c08] irq_work_run_list at 801151f0 #9 [89c39c38] irq_work_run at 80115274 #10 [89c39c50] mipsxx_pmu_handle_shared_irq at 8002cc7c PID: 1481 TASK: 8eaac6a8 CPU: 3 COMMAND: "process" #0 [8de7f900] do_raw_write_lock at 800900e0 #1 [8de7f918] perf_event_context_sched_in at 80122310 #2 [8de7f938] __perf_event_task_sched_in at 80122608 #3 [8de7f958] finish_task_switch at 8006b8a4 #4 [8de7f998] __schedule at 805e4dc4 #5 [8de7f9f8] schedule at 805e5558 #6 [8de7fa10] schedule_hrtimeout_range_clock at 805e9984 #7 [8de7fa70] poll_schedule_timeout at 8018e8f8 #8 [8de7fa88] do_select at 8018f338 #9 [8de7fd88] core_sys_select at 8018f5cc #10 [8de7fee0] sys_select at 8018f854 #11 [8de7ff28] syscall_common at 80028fc8 The lock seems to be there to protect the hardware counters so there is no need to hold it across irq_work_run(). Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs countersAleksandar Markovic1-0/+2
Add missing clearing of BLTZALL and BGEZALL emulation counters in function mipsr2_stats_clear_show(). Previously, it was not possible to reset BLTZALL and BGEZALL emulation counters - their value remained the same even after explicit request via debugfs. As far as other related counters are concerned, they all seem to be properly cleared. This change affects debugfs operation only, core R2 emulation functionality is not affected. Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: james.hogan@imgtec.com Cc: leonid.yegoshin@imgtec.com Cc: douglas.leung@imgtec.com Cc: petar.jovanovic@imgtec.com Cc: miodrag.dinic@imgtec.com Cc: goran.ferenc@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15517/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identificationLeonid Yegoshin1-2/+12
Fix the problem of inaccurate identification of instructions BLEZL and BGTZL in R2 emulation code by making sure all necessary encoding specifications are met. Previously, certain R6 instructions could be identified as BLEZL or BGTZL. R2 emulation routine didn't take into account that both BLEZL and BGTZL instructions require their rt field (bits 20 to 16 of instruction encoding) to be 0, and that, at same time, if the value in that field is not 0, the encoding may represent a legitimate MIPS R6 instruction. This means that a problem could occur after emulation optimization, when emulation routine tried to pipeline emulation, picked up a next candidate, and subsequently misrecognized an R6 instruction as BLEZL or BGTZL. It should be said that for single pass strategy, the problem does not happen because CPU doesn't trap on branch-compacts which share opcode space with BLEZL/BGTZL (but have rt field != 0, of course). Signed-off-by: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtech.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtech.com> Reported-by: Douglas Leung <douglas.leung@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: james.hogan@imgtec.com Cc: petar.jovanovic@imgtec.com Cc: goran.ferenc@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15456/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10MIPS: Enable GENERIC_CPU_AUTOPROBEMarcin Nowakowski1-0/+7
Add missing macros and methods that are required by CONFIG_GENERIC_CPU_AUTOPROBE: MAX_CPU_FEATURES, cpu_have_feature(), cpu_feature(). Also set a default elf platform as currently it is not set for most MIPS platforms resulting in incorrectly specified modalias values in cpu autoprobe ("cpu:type:(null):feature:..."). Export 'elf_hwcap' symbol so that it can be accessed from modules that use module_cpu_feature_match() Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15395/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds10-28/+66
Pull MIPS fixes from Ralf Baechle: "Lantiq: - Fix adding xbar resoures causing a panic Loongson3: - Some Loongson 3A don't identify themselves as having an FTLB so hardwire that knowledge into CPU probing. - Handle Loongson 3 TLB peculiarities in the fast path of the RDHWR emulation. - Fix invalid FTLB entries with huge page on VTLB+FTLB platforms - Add missing calculation of S-cache and V-cache cache-way size Ralink: - Fix typos in rt3883 pinctrl data Generic: - Force o32 fp64 support on 32bit MIPS64r6 kernels - Yet another build fix after the linux/sched.h changes - Wire up statx system call - Fix stack unwinding after introduction of IRQ stack - Fix spinlock code to build even for microMIPS with recent binutils SMP-CPS: - Fix retrieval of VPE mask on big endian CPUs" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: IRQ Stack: Unwind IRQ stack onto task stack MIPS: c-r4k: Fix Loongson-3's vcache/scache waysize calculation MIPS: Flush wrong invalid FTLB entry for huge page MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3 MIPS: Add MIPS_CPU_FTLB for Loongson-3A R2 MIPS: Lantiq: fix missing xbar kernel panic MIPS: smp-cps: Fix retrieval of VPE mask on big endian CPUs MIPS: Wire up statx system call MIPS: Include asm/ptrace.h now linux/sched.h doesn't MIPS: ralink: Fix typos in rt3883 pinctrl MIPS: End spinlocks with .insn MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels
2017-04-06mips: sanitize __access_ok()Al Viro2-13/+13
for one thing, the last argument is always __access_mask and had been such since 2.4.0-test3pre8; for another, it can bloody well be a static inline - -O2 or -Os, __builtin_constant_p() propagates through static inline calls. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-06Merge commit 'fc69910f329d' into uaccess.mipsAl Viro2-0/+2
backmerge of a build fix from mainline
2017-04-03debug: Fix __bug_table[] in arch linker scriptsPeter Zijlstra1-0/+1
The kbuild test robot reported this build failure on a number of architectures: > make.cross ARCH=arm > lib/lib.a(bug.o): In function `find_bug': > >> lib/bug.c:135: undefined reference to `__start___bug_table' > >> lib/bug.c:135: undefined reference to `__stop___bug_table' Caused by: 19d436268dde ("debug: Add _ONCE() logic to report_bug()") Which moved the BUG_TABLE from RO_DATA_SECTION() to RW_DATA_SECTION(), but a number of architectures don't use RW_DATA_SECTION(), so they ended up with no __bug_table[] ... Ideally all those would use RW_DATA_SECTION() in their linker scripts, but that's for another day. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: kbuild-all@01.org Cc: tipbuild@zytor.com Link: http://lkml.kernel.org/r/20170330154927.o6qmgfp4bdhrajbm@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-29Merge branch 'regset' (PTRACE_SETREGSET data leakage)Linus Torvalds1-1/+2
Merge PTRACE_SETREGSET leakage fixes from Dave Martin: "This series is the collection of fixes I proposed on this topic, that have not yet appeared upstream or in the stable branches, The issue can leak kernel stack, but doesn't appear to allow userspace to attack the kernel directly. The affected architectures are c6x, h8300, metag, mips and sparc. [ Mark Salter points out that c6x has no MMU or other mechanism to prevent userspace access to kernel code or data on c6x, but it doesn't hurt to clean that case up too. ] The bugs arise from use of user_regset_copyin(). Users of user_regset_copyin() can work in one of two ways: 1) Copy directly to thread_struct or equivalent. (This seems to be the design assumption of the regset API, and is the most common approach.) 2) Copy to a local variable and then transfer to thread_struct. (A significant minority of cases.) Buggy code typically involves approach 2" * emailed patches from Dave Martin <Dave.Martin@arm.com>: sparc/ptrace: Preserve previous registers for short regset write mips/ptrace: Preserve previous registers for short regset write metag/ptrace: Reject partial NT_METAG_RPIPE writes metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS metag/ptrace: Preserve previous registers for short regset write h8300/ptrace: Fix incorrect register transfer count c6x/ptrace: Remove useless PTRACE_SETREGSET implementation
2017-03-29mips/ptrace: Preserve previous registers for short regset writeDave Martin1-1/+2
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-28new helper: uaccess_kernel()Al Viro1-5/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28KVM: MIPS: Implement VZ supportJames Hogan1-0/+1
Add the main support for the MIPS Virtualization ASE (A.K.A. VZ) to MIPS KVM. The bulk of this work is in vz.c, with various new state and definitions elsewhere. Enough is implemented to be able to run on a minimal VZ core. Further patches will fill out support for guest features which are optional or can be disabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-doc@vger.kernel.org
2017-03-28MIPS: Probe guest MVHJames Hogan1-1/+4
Probe for availablility of M{T,F}HC0 instructions used with e.g. XPA in the VZ guest context, and make it available via cpu_guest_has_mvh. This will be helpful in properly emulating the MAAR registers in KVM for MIPS VZ. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-28MIPS: Probe guest CP0_UserLocalJames Hogan1-1/+5
Probe for presence of guest CP0_UserLocal register and expose via cpu_guest_has_userlocal. This register is optional pre-r6, so this will allow KVM to only save/restore/expose the guest CP0_UserLocal register if it exists. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-28MIPS: Add defs & probing of UFRJames Hogan1-0/+2
Add definitions and probing of the UFR bit in Config5. This bit allows user mode control of the FR bit (floating point register mode). It is present if the UFRP bit is set in the floating point implementation register. This is a capability KVM may want to expose to guest kernels, even though Linux is unlikely to ever use it due to the implications for multi-threaded programs. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-22MIPS: IRQ Stack: Unwind IRQ stack onto task stackMatt Redfearn3-20/+45
When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3Huacai Chen2-6/+15
Loongson-3's micro TLB (ITLB) is not strictly a subset of JTLB. That means: when a JTLB entry is replaced by hardware, there may be an old valid entry exists in ITLB. So, a TLB miss exception may occur while handle_ri_rdhwr() is running because it try to access EPC's content. However, handle_ri_rdhwr() doesn't clear EXL, which makes a TLB Refill exception be treated as a TLB Invalid exception and tlbp may fail. In this case, if FTLB (which is usually set-associative instead of set- associative) is enabled, a tlbp failure will cause an invalid tlbwi, which will hang the whole system. This patch rename handle_ri_rdhwr_vivt to handle_ri_rdhwr_tlbp and use it for Loongson-3. It try to solve the same problem described as below, but more straightforwards. https://patchwork.linux-mips.org/patch/12591/ I think Loongson-2 has the same problem, but it has no FTLB, so we just keep it as is. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Rui Wang <wangr@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15753/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21MIPS: Add MIPS_CPU_FTLB for Loongson-3A R2Huacai Chen1-1/+1
Loongson-3A R2 and newer CPU have FTLB, but Config0.MT is 1, so add MIPS_CPU_FTLB to the CPU options. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21MIPS: smp-cps: Fix retrieval of VPE mask on big endian CPUsMatt Redfearn1-1/+1
The vpe_mask member of struct core_boot_config is of type atomic_t, which is a 32bit type. In cps-vec.S this member was being retrieved by a PTR_L macro, which on 64bit systems is a 64bit load. On little endian systems this is OK, since the double word that is retrieved will have the required less significant word in the correct position. However, on big endian systems the less significant word of the load is retrieved from address+4, and the more significant from address+0. The destination register therefore ends up with the required word in the more significant word e.g. when starting the second VP of a big endian 64bit system, the load PTR_L ta2, COREBOOTCFG_VPEMASK(a0) ends up setting register ta2 to 0x0000000300000000 When this value is written to the CPC it is ignored, since it is invalid to write anything larger than 4 bits. This results in any VP other than VP0 in a core failing to start in 64bit big endian systems. Change the load to a 32bit load word instruction to fix the bug. Fixes: f12401d7219f ("MIPS: smp-cps: Pull boot config retrieval out of mips_cps_boot_vpes") Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15787/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-08MIPS: Wire up statx system callJames Hogan4-0/+4
Wire up the statx system call for MIPS, which was introduced in commit a528d35e8bfc ("statx: Add a system call to make enhanced file info available"). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15387/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-08MIPS: Add missing include filesArnd Bergmann2-0/+2
After the split of linux/sched.h, several platforms in arch/mips stopped building. Add the respective additional #include statements to fix the problem I first tried adding these into asm/processor.h, but ran into circular header dependencies with that which I could not figure out. The commit I listed as causing the problem is the branch merge, as there is likely a combination of multiple patches in that branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org Fixes: 1827adb11ad2 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-03sched/headers: Move task-stack related APIs from <linux/sched.h> to ↵Ingo Molnar1-1/+1
<linux/sched/task_stack.h> Split out the task->stack related functionality, which is not really part of the core scheduler APIs. Only keep task_thread_info() because it's used by sched.h. Update the code that uses those facilities. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-03sched/headers: Move task->mm handling methods to <linux/sched/mm.h>Ingo Molnar1-1/+1
Move the following task->mm helper APIs into a new header file, <linux/sched/mm.h>, to further reduce the size and complexity of <linux/sched.h>. Here are how the APIs are used in various kernel files: # mm_alloc(): arch/arm/mach-rpc/ecard.c fs/exec.c include/linux/sched/mm.h kernel/fork.c # __mmdrop(): arch/arc/include/asm/mmu_context.h include/linux/sched/mm.h kernel/fork.c # mmdrop(): arch/arm/mach-rpc/ecard.c arch/m68k/sun3/mmu_emu.c arch/x86/mm/tlb.c drivers/gpu/drm/amd/amdkfd/kfd_process.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/hw/hfi1/file_ops.c drivers/vfio/vfio_iommu_spapr_tce.c fs/exec.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/mmu_notifier.h include/linux/sched/mm.h kernel/fork.c kernel/futex.c kernel/sched/core.c mm/khugepaged.c mm/ksm.c mm/mmu_context.c mm/mmu_notifier.c mm/oom_kill.c virt/kvm/kvm_main.c # mmdrop_async_fn(): include/linux/sched/mm.h # mmdrop_async(): include/linux/sched/mm.h kernel/fork.c # mmget_not_zero(): fs/userfaultfd.c include/linux/sched/mm.h mm/oom_kill.c # mmput(): arch/arc/include/asm/mmu_context.h arch/arc/kernel/troubleshoot.c arch/frv/mm/mmu-context.c arch/powerpc/platforms/cell/spufs/context.c arch/sparc/include/asm/mmu_context_32.h drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/core/uverbs_main.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/exec.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/events/uprobes.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/oom_kill.c mm/process_vm_access.c mm/rmap.c mm/swapfile.c mm/util.c virt/kvm/async_pf.c # mmput_async(): include/linux/sched/mm.h kernel/fork.c mm/oom_kill.c # get_task_mm(): arch/arc/kernel/troubleshoot.c arch/powerpc/platforms/cell/spufs/context.c drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/util.c # mm_access(): fs/proc/base.c include/linux/sched/mm.h kernel/fork.c mm/process_vm_access.c # mm_release(): arch/arc/include/asm/mmu_context.h fs/exec.c include/linux/sched/mm.h include/uapi/linux/sched.h kernel/exit.c kernel/fork.c Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove the <linux/mm_types.h> dependency from ↵Ingo Molnar1-1/+1
<linux/sched.h> Update code that relied on sched.h including various MM types for them. This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar7-0/+7
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/hotplug.h> We are going to split <linux/sched/hotplug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/hotplug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar3-0/+3
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-0/+2
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-1/+2
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27mm: add new mmgrab() helperVegard Nossum1-1/+1
Apart from adding the helper function itself, the rest of the kernel is converted mechanically using: git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/' git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. (Michal Hocko provided most of the kerneldoc comment.) Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24userfaultfd: non-cooperative: add event for memory unmapsMike Rapoport1-1/+1
When a non-cooperative userfaultfd monitor copies pages in the background, it may encounter regions that were already unmapped. Addition of UFFD_EVENT_UNMAP allows the uffd monitor to track precisely changes in the virtual memory layout. Since there might be different uffd contexts for the affected VMAs, we first should create a temporary representation for the unmap event for each uffd context and then notify them one by one to the appropriate userfault file descriptors. The event notification occurs after the mmap_sem has been released. [arnd@arndb.de: fix nommu build] Link: http://lkml.kernel.org/r/20170203165141.3665284-1-arnd@arndb.de [mhocko@suse.com: fix nommu build] Link: http://lkml.kernel.org/r/20170202091503.GA22823@dhcp22.suse.cz Link: http://lkml.kernel.org/r/1485542673-24387-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-21Merge tag 'mips_4.11' of ↵Linus Torvalds30-321/+648
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "Here's the main MIPS pull request for 4.11. It contains a few new features such as IRQ stacks, cacheinfo support, and KASLR for Octeon CPUs, and a variety of smaller improvements and fixes including devicetree additions, kexec cleanups, microMIPS stack unwinding fixes, and a bunch of build fixes to clean up continuous integration builds. Its all been in linux-next for at least a couple of days, most of it far longer. Miscellaneous: - Add IRQ stacks - Add cacheinfo support - Add "uzImage.bin" zboot target - Unify performance counter definitions - Export various (mainly assembly) symbols alongside their definitions - Audit and remove unnecessary uses of module.h kexec & kdump: - Lots of improvements and fixes - Add correct copy_regs implementations - Add debug logging of new kernel information Security: - Use Makefile.postlink to insert relocations into vmlinux - Provide plat_post_relocation hook (used for Octeon KASLR) - Add support for tuning mmap randomisation - Relocate DTB microMIPS: - A load of unwind fixes - Add some missing .insn to fix link errors MIPSr6: - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6 - Allow pre-r6 emulation on SMP MIPSr6 kernels Cache management: - Treat physically indexed dcache as non-aliasing - Add return errors to protected cache ops for KVM - CM3: Ensure L1 & L2 cache ECC checking matches - CM3: Indicate inclusive caches - I6400: Treat dcache as physically indexed Memory management: - Ensure bootmem doesn't corrupt reserved memory - Export some TLB exception generation functions for KVM OF: - NULL check initial_boot_params before use in of_scan_flat_dt() - Fix unaligned access in of_alias_scan() SMP: - CPS: Don't BUG if a CPU fails to start Other fixes: - Fix longstanding 64-bit IP checksum carry bug - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE, CPU_FREQ_STAT,SCSI_DH changes - Disable certain builtin compiler options, stack-check (whole kernel), asynchronous-unwind-tables (VDSO). - A bunch of build fixes from kernelci.org testing - Various other minor cleanups & corrections BMIPS: - Migrate interrupts during bmips_cpu_disable - BCM47xx: Add Luxul devices - BCM47xx: Fix Asus WL-500W button inversion - BCM7xxx: Add SPI device nodes Generic (multiplatform): - Add kexec DTB passing - Fix big endian - Add cpp_its_S in ksym_dep_filter to silence build warning IP22: - Reformat inline assembler code to modern standards - Fix binutils 2.25 build error IP27: - Fix duplicate CAC_BASE definition build error - Disable qlge driver to workaround broken compiler Lantiq: - Refresh defconfig and activate more drivers - Lock DMA register access - Fix cascading IRQ setup - Fix build of VPE loader - xway: Fix ethernet packet header corruption over reboot Loongson1 - Add watchdog support - 1B: Reduce DEFAULT_MEMSIZE to 64MB - 1B: Change OSC clock name to match rest of kernel - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB Octeon: - Add KASLR support - Support Octeon III USB controller - Fix large copy_from_user corner case - Enable devtmpfs in defconfig Netlogic: - Fix non-default XLR build error due to netlogic,xlp-pic code - Fix assembler warning from smpboot.S pic32mzda: - Fix linker error when early printk is disabled Pistachio: - Add base device tree - Add Ci40 "Marduk" device tree Ralink: - Support raw appended DTB - Add missing I2C & I2S clocks - Add missing pinmux and fix pinmux function name typo - Add missing clk_round_rate() - Clean up prom_init() - MT7621: Set SoC type - MT7621: Support highmem TXx9: - Modernize printing of kernel messages and resolve KERN_CONT fallout - 7segled: use permission-specific DEVICE_ATTR variants XilFPGA: - Add IRQ controller and UART IRQ - Add AXI I2C and emaclite to DT & defconfig" * tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits) MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables MIPS: BCM47XX: Fix button inversion for Asus WL-500W MIPS: DTS: Add img directory to Makefile MIPS: ip27: Disable qlge driver in defconfig MIPS: pic32mzda: Fix linker error for pic32_get_pbclk() MIPS: Lantiq: Keep ethernet enabled during boot MIPS: OCTEON: Fix copy_from_user fault handling for large buffers MIPS: Fix special case in 64 bit IP checksumming. MIPS: OCTEON: Enable DEVTMPFS MIPS: lantiq: Set physical_memsize MIPS: sysmips: Remove duplicated include from syscall.c Kbuild: Add cpp_its_S in ksym_dep_filter MIPS: Audit and remove any unnecessary uses of module.h MIPS: Unify perf counter register definitions MIPS: Disable stack checks on MIPS kernels MIPS: OCTEON: Platform support for OCTEON III USB controller MIPS: Lantiq: Fix cascaded IRQ setup MIPS: sync-r4k: Fix KERN_CONT fallout MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch MIPS: Fix distclean with Makefile.postlink ...
Powered by cgit, Gruvboxed by Blaster4385.