aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/dec
AgeCommit message (Collapse)AuthorFilesLines
2013-09-13MIPS: DECstation I/O ASIC DMA interrupt handling fixMaciej W. Rozycki1-0/+8
This change complements commit d0da7c002f7b2a93582187a9e3f73891a01d8ee4 and brings clear_ioasic_irq back, renaming it to clear_ioasic_dma_irq at the same time, to make I/O ASIC DMA interrupts functional. Unlike ordinary I/O ASIC interrupts DMA interrupts need to be deasserted by software by writing 0 to the respective bit in I/O ASIC's System Interrupt Register (SIR), similarly to how CP0.Cause.IP0 and CP0.Cause.IP1 bits are handled in the CPU (the difference is SIR DMA interrupt bits are R/W0C so there's no need for an RMW cycle). Otherwise the handler is reentered over and over again. The only current user is the DEC LANCE Ethernet driver and its extremely uncommon DMA memory error handler that does not care when exactly the interrupt is cleared. Anticipating the use of DMA interrupts by the Zilog SCC driver this change however exports clear_ioasic_dma_irq for device drivers to choose the right application-specific sequence to clear the request explicitly rather than calling it implicitly in the .irq_eoi handler of `struct irq_chip'. Previously these interrupts were cleared in the .end handler of the said structure, before it was removed. Signed-off-by: Maciej W. Rozycki <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5826/ Signed-off-by: Ralf Baechle <[email protected]>
2013-09-13MIPS: DECstation HRT initialization rearrangementMaciej W. Rozycki1-3/+19
Not all I/O ASIC versions have the free-running counter implemented, an early revision used in the 5000/1xx models aka 3MIN and 4MIN did not have it. Therefore we cannot unconditionally use it as a clock source. Fortunately if not implemented its register slot has a fixed value so it is enough if we check for the value at the end of the calibration period being the same as at the beginning. This also means we need to look for another high-precision clock source on the systems affected. The 5000/1xx can have an R4000SC processor installed where the CP0 Count register can be used as a clock source. Unfortunately all the R4k DECstations suffer from the missed timer interrupt on CP0 Count reads erratum, so we cannot use the CP0 timer as a clock source and a clock event both at a time. However we never need an R4k clock event device because all DECstations have a DS1287A RTC chip whose periodic interrupt can be used as a clock source. This gives us the following four configuration possibilities for I/O ASIC DECstations: 1. No I/O ASIC counter and no CP0 timer, e.g. R3k 5000/1xx (3MIN). 2. No I/O ASIC counter but the CP0 timer, i.e. R4k 5000/150 (4MIN). 3. The I/O ASIC counter but no CP0 timer, e.g. R3k 5000/240 (3MAX+). 4. The I/O ASIC counter and the CP0 timer, e.g. R4k 5000/260 (4MAX+). For #1 and #2 this change stops the I/O ASIC free-running counter from being installed as a clock source of a 0Hz frequency. For #2 it also arranges for the CP0 timer to be used as a clock source rather than a clock event device, because having an accurate wall clock is more important than a high-precision interval timer. For #3 there is no change. For #4 the change makes the I/O ASIC free-running counter installed as a clock source so that the CP0 timer can be used as a clock event device. Unfortunately the use of the CP0 timer as a clock event device relies on a succesful completion of c0_compare_interrupt. That never happens, because while waiting for a CP0 Compare interrupt to happen the function spins in a loop reading the CP0 Count register. This makes the CP0 Count erratum trigger reliably causing the interrupt waited for to be lost in all cases. As a result #4 resorts to using the CP0 timer as a clock source as well, just as #2. However we want to keep this separate arrangement in case (hope) c0_compare_interrupt is eventually rewritten such that it avoids the erratum. Signed-off-by: Maciej W. Rozycki <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5825/ Signed-off-by: Ralf Baechle <[email protected]>
2013-09-05MIPS: DECstation HRT calibration bug fixesMaciej W. Rozycki1-2/+3
This change corrects DECstation HRT calibration, by removing the following bugs: 1. Calibration period selection -- HZ / 10 has been chosen, however on DECstation computers, HZ never divides by 10, as the choice for HZ is among 128, 256 and 1024. The choice therefore results in a systematic calibration error, e.g. 6.25% for the usual choice of 128 for HZ: 128 / 10 * 10 = 120 (128 - 120) / 128 -> 6.25% The change therefore makes calibration use HZ / 8 that is always accurate for the HZ values available, getting rid of the systematic error. 2. Calibration starting point synchronisation -- the duration of a number of intervals between DS1287A periodic interrupt assertions is measured, however code does not ensure at the beginning that the interrupt has not been previously asserted. This results in a variable error of e.g. up to another 6.25% for the period of HZ / 8 (8.(3)% with the original HZ / 10 period) and the usual choice of 128 for HZ: 1 / 16 -> 6.25% 1 / 12 -> 8.(3)% The change therefore adds an initial call to ds1287_timer_state that clears any previous periodic interrupt pending. The same issue applies to both I/O ASIC counter and R4k CP0 timer calibration on DECstation systems as similar code is used in both cases and both pieces of code are covered by this fix. On an R3400 test system used this fix results in a change of the I/O ASIC clock frequency reported from values like: I/O ASIC clock frequency 23185830Hz to: I/O ASIC clock frequency 24999288Hz removing the miscalculation by 6.25% from the systematic error and (for the individual sample provided) a further 1.00% from the variable error, accordingly. The nominal I/O ASIC clock frequency is 25MHz on this system. Here's another result, with the fix applied, from a system that has both HRTs available (using an R4400 at 60MHz nominal): MIPS counter frequency 59999328Hz I/O ASIC clock frequency 24999432Hz Signed-off-by: Maciej W. Rozycki <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5807/ Signed-off-by: Ralf Baechle <[email protected]>
2013-06-18MIPS: DEC: remove unbuildable promcon.cPaul Bolle2-55/+0
promcon.o is built if CONFIG_PROM_CONSOLE is set. But there's no Kconfig symbol PROM_CONSOLE, so promcon.c is unbuildable. Remove it. Signed-off-by: Paul Bolle <[email protected]> Acked-by: Maciej W. Rozycki <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/5344/ Signed-off-by: Ralf Baechle <[email protected]>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle8-60/+60
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <[email protected]>
2012-07-23MIPS: DEC: use IS_ENABLED()Florian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/3333/ Signed-off-by: Ralf Baechle <[email protected]>
2012-03-28Disintegrate asm/system.h for MIPSDavid Howells4-4/+1
Disintegrate asm/system.h for MIPS. Signed-off-by: David Howells <[email protected]> Acked-by: Ralf Baechle <[email protected]> cc: [email protected]
2011-12-07MIPS: irq: Remove IRQF_DISABLEDYong Zhang1-1/+0
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. [[email protected]: Fixed up conflicts in arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and arch/mips/kernel/perf_event.c.] Signed-off-by: Yong Zhang <[email protected]> To: [email protected] Cc: [email protected] [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2835/ Signed-off-by: Ralf Baechle <[email protected]>
2011-09-21MIPS: Mark cascade and low level interrupts IRQF_NO_THREADWu Zhangjin1-0/+4
Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: Wu Zhangjin <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner2-3/+3
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-25MIPS: DEC: Convert to new irq_chip functionsThomas Gleixner2-59/+24
Signed-off-by: Thomas Gleixner <[email protected]> To: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2178/ Signed-off-by: Ralf Baechle <[email protected]>
2011-01-13set_rtc_mmss: show warning message only onceStephen Hemminger1-1/+1
Occasionally the system gets into a state where the CMOS clock has gotten slightly ahead of current time and the periodic update of RTC fails. The message is a nuisance and repeats spamming the log. See: http://www.ntp.org/ntpfaq/NTP-s-trbl-spec.htm#Q-LINUX-SET-RTC-MMSS Rather than just removing the message, make it show only once and reduce severity since it indicates a normal and non urgent condition. Signed-off-by: Stephen Hemminger <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: David Howells <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflagsLinus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags: Fix IRQ flag handling naming MIPS: Add missing #inclusions of <linux/irq.h> smc91x: Add missing #inclusion of <linux/irq.h> Drop a couple of unnecessary asm/system.h inclusions SH: Add missing consts to sys_execve() declaration Blackfin: Rename IRQ flags handling functions Blackfin: Add missing dep to asm/irqflags.h Blackfin: Rename DES PC2() symbol to avoid collision Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header Blackfin: Split PLL code from mach-specific cdef headers
2010-10-19MIPS: Repair Kbuild make clean breakage.David Daney1-1/+1
When running make clean, Kbuild doesn't process the .config file, so nothing generates a platform-y variable. We can get it to descend into the platform directories by setting $(obj-). The dec Platform file was unconditionally setting platform-, obliterating its previous contents and preventing some directories from being cleaned. This is change to an append operation '+=' to allow cavium-octeon to be cleaned. Signed-off-by: David Daney <[email protected]> Cc: Sam Ravnborg <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/1718/ Signed-off-by: Ralf Baechle <[email protected]>
2010-10-07MIPS: Add missing #inclusions of <linux/irq.h>David Howells1-0/+1
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <[email protected]> Acked-by: Ralf Baechle <[email protected]>
2010-08-05MIPS: DECstation: Migrate to new platform makefile style.Ralf Baechle2-2/+8
Signed-off-by: Ralf Baechle <[email protected]>
2010-08-05MIPS: DECstation: Checkpatch cleanupAndrea Gelmini1-2/+1
arch/mips/dec/promcon.c:37: ERROR: that open brace { should be on the previous line Signed-off-by: Andrea Gelmini <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/1270/ Signed-off-by: Ralf Baechle <[email protected]>
2010-02-27MIPS: DEC: Convert KN01 lock to raw spinlock.Ralf Baechle1-5/+5
Signed-off-by: Ralf Baechle <[email protected]>
2010-02-27MIPS: Make various locks static.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <[email protected]>
2010-02-27MIPS: Nuke trailing blank linesRalf Baechle1-1/+0
Recent git versions now warn about those and they've always been a bit of an annoyance. Signed-off-by: Ralf Baechle <[email protected]>
2009-09-18Merge branch 'timers-for-linus' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (34 commits) time: Prevent 32 bit overflow with set_normalized_timespec() clocksource: Delay clocksource down rating to late boot clocksource: clocksource_select must be called with mutex locked clocksource: Resolve cpu hotplug dead lock with TSC unstable, fix crash timers: Drop a function prototype clocksource: Resolve cpu hotplug dead lock with TSC unstable timer.c: Fix S/390 comments timekeeping: Fix invalid getboottime() value timekeeping: Fix up read_persistent_clock() breakage on sh timekeeping: Increase granularity of read_persistent_clock(), build fix time: Introduce CLOCK_REALTIME_COARSE x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown clocksource: Avoid clocksource watchdog circular locking dependency clocksource: Protect the watchdog rating changes with clocksource_mutex clocksource: Call clocksource_change_rating() outside of watchdog_lock timekeeping: Introduce read_boot_clock timekeeping: Increase granularity of read_persistent_clock() timekeeping: Update clocksource with stop_machine timekeeping: Add timekeeper read_clock helper functions timekeeping: Move NTP adjusted clock multiplier to struct timekeeper ... Fix trivial conflict due to MIPS lemote -> loongson renaming.
2009-09-17MIPS: Remove useless zero initializations.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <[email protected]>
2009-08-15timekeeping: Increase granularity of read_persistent_clock()Martin Schwidefsky1-2/+3
The persistent clock of some architectures (e.g. s390) have a better granularity than seconds. To reduce the delta between the host clock and the guest clock in a virtualized system change the read_persistent_clock function to return a struct timespec. Signed-off-by: Martin Schwidefsky <[email protected]> Cc: Ingo Molnar <[email protected]> Acked-by: John Stultz <[email protected]> Cc: Daniel Walker <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2009-08-03MIPS: Eleminate filenames from commentsRalf Baechle9-18/+0
They tend to get not updated when files are moved around or copied and lack any obvious use. While at it zap some only too obvious comments and as per Shinya's suggestion, add a copyright header to extable.c. Signed-off-by: Ralf Baechle <[email protected]> Acked-by: Shinya Kuribayashi <[email protected]> Acked-by: Thadeu Lima de Souza Cascardo <[email protected]>
2008-10-20mips: use bcd2bin/bin2bcdAdrian Bunk1-9/+9
Changes mips to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <[email protected]> Cc: Ralf Baechle <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-04-28[MIPS] DS1287: Add clockevent driverYoichi Yuasa1-47/+22
Signed-off-by: Yoichi Yuasa <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2008-04-28[MIPS] add DECstation I/O ASIC clocksourceYoichi Yuasa1-1/+1
Add DECstation I/O ASIC clocksource Signed-off-by: Yoichi Yuasa <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2008-01-29[MIPS] time: remove unused mips_timer_state()Yoichi Yuasa1-1/+0
Signed-off-by: Yoichi Yuasa <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-10-11[MIPS] Allow hardwiring of the CPU type to a single type for optimization.Ralf Baechle3-6/+6
This saves a few k on systems which only ever ship with a single CPU type. Signed-off-by: Ralf Baechle <[email protected]>
2007-10-11[MIPS] Deforest the function pointer jungle in the time code.Ralf Baechle2-12/+4
Hard to follow who is pointing what to where and why so it's simply getting in the way of the time code renovation. Signed-off-by: Ralf Baechle <[email protected]>
2007-10-11[MIPS] ARC: Get rid of mips_machgroupRalf Baechle1-3/+0
This has not been any serious user of this ill conceived thing since the original invention in like '95. Signed-off-by: Ralf Baechle <[email protected]>
2007-10-11[MIPS] dec/time.c: Remove no longer needed inclusion of <asm/div64.h>.Maciej W. Rozycki1-1/+0
Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-09-19[MIPS] DEC: Initialise ioasic_ssr_lockMaciej W. Rozycki1-1/+1
Fix the definition of the ioasic_ssr_lock spinlock to include a proper initialisation. Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-07-31[MIPS] Use -Werror on subdirectories which build cleanly.Ralf Baechle1-0/+2
Signed-off-by: Ralf Baechle <[email protected]>
2007-07-10[MIPS] DECstation: Optimised early printk()Maciej W. Rozycki2-6/+29
This is an optimised implementation of early printk() for the DECstation. After the recent conversion to a MIPS-specific generic routine using a character-by-character output the performance dropped significantly. This change reverts to the previous speed -- even at 9600 bps of the serial console the difference is visible with a naked eye; I presume for a framebuffer it is even worse (it may depend on exactly which one is used though). Additionally the change includes a fix for a problem that the old implementation had -- the format used would not actually limit the length of the string output. This new implementation uses a local buffer to deal with it -- even with this additional copying it is much faster than the generic function. Plus this driver is registered much earlier than the generic one, allowing one to see critical messages, such as one about an incorrect CPU setting used, that are produced beforehand. :-) Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-07-10[MIPS] Transform old-style macros to newer "__noreturn"Robert P. J. Day2-6/+6
Convert old/obsolete NORET_TYPE and ATTRIB_NORET macros to use the newer standard of "__noreturn" as defined in compiler-gcc.h. Signed-off-by: Robert P. J. Day <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-03-09[MIPS] DEC: Remove call to register_prom_console.Ralf Baechle1-3/+0
Register_prom_console was removed when mips was converted to early printk. Signed-off-by: Ralf Baechle <[email protected]>
2007-03-04[MIPS] Fix and cleanup the mess that a dozen prom_printf variants are.Ralf Baechle1-33/+5
early_printk is a so much saner thing. Signed-off-by: Ralf Baechle <[email protected]>
2007-03-04[MIPS] DEC: Remove redeclarations of mips_machgroup and mips_machtype.Ralf Baechle1-3/+0
Signed-off-by: Ralf Baechle <[email protected]>
2007-02-26[MIPS] Kill redundant EXTRA_AFLAGSAtsushi Nemoto2-4/+0
Many Makefiles in arch/mips have EXTRA_AFLAGS := $(CFLAGS) line. This is redundant while AFLAGS contains $(cflags-y) and any options only listed in CFLAGS (not in cflags-y) should be unnecessary for asm sources. Signed-off-by: Atsushi Nemoto <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-02-13[MIPS] DECstation: Fix irq handlingAtsushi Nemoto1-4/+0
When I post a patch (commit f431baa55abf8adeed0c718b51deacbc151f58f1), I just tried to not change behavior of existing codes, but it seems dec/int-handler.S had been broken since its previous commit 937a801576f954bd030d7c4a5a94571710d87c0b. The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so dec's plat_irq_dispatch should not do it, and there is no need to adjust RA. Signed-off-by: Atsushi Nemoto <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-02-09[TC] TURBOchannel support for the DECstationMaciej W. Rozycki4-0/+101
This is the platform-specific part of TURBOchannel bus support for the DECstation. It implements determining whether the bus is actually there, getting bus parameters, IRQ assignments for devices and protected accesses to possibly unoccupied slots that may trigger bus error exceptions. Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-02-06[MIPS] use name instead of typename for each irq_chipAtsushi Nemoto2-3/+3
The "typename" field was obsoleted by the "name" field. Signed-off-by: Atsushi Nemoto <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-02-06[MIPS] prom_free_prom_memory cleanupAtsushi Nemoto1-14/+3
Current prom_free_prom_memory() implementations are almost same as free_init_pages(), or no-op. Make free_init_pages() extern (again) and make prom_free_prom_memory() use it. Signed-off-by: Atsushi Nemoto <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-02-06[MIPS] Define MIPS_CPU_IRQ_BASE in generic headerAtsushi Nemoto1-6/+6
The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2007-01-24[MIPS] Fix reported amount of freed memory - it's in kB not bytesThiemo Seufer1-1/+1
While at it, change message on DEC for consistency. Signed-off-by: Thiemo Seufer <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2006-12-06[MIPS] *-berr: Header inclusions for DEC bus error handlersMaciej W. Rozycki2-0/+3
A fixup to add missing header inclusions for bus error handlers for DECstation system after the recent switch to get_irq_regs(). Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2006-12-06[MIPS] Compile __do_IRQ() when really neededFranck Bui-Huu2-8/+0
__do_IRQ() is needed only by irq handlers that can't use default handlers defined in kernel/irq/chip.c. For others platforms there's no need to compile this function since it won't be used. For those platforms this patch defines GENERIC_HARDIRQS_NO__DO_IRQ symbol which is used exactly for this purpose. Futhermore for platforms which do not use __do_IRQ(), end() method which is part of the 'irq_chip' structure is not used. This patch simply removes this method in this case. Signed-off-by: Franck Bui-Huu <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2006-12-06[MIPS] Do not use handle_level_irq for ioasic_dma_irq_type.Atsushi Nemoto1-2/+1
Signed-off-by: Atsushi Nemoto <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
2006-11-30[MIPS] mips HPT cleanup: make clocksource_mips publicAtsushi Nemoto1-2/+2
Make clocksource_mips public and get rid of mips_hpt_read, mips_hpt_mask. Signed-off-by: Atsushi Nemoto <[email protected]> Signed-off-by: Ralf Baechle <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.