aboutsummaryrefslogtreecommitdiff
path: root/arch/microblaze
AgeCommit message (Collapse)AuthorFilesLines
2013-04-29mm/microblaze: use free_highmem_page() to free highmem pages into buddy systemJiang Liu1-5/+1
Use helper function free_highmem_page() to free highmem pages into the buddy system. Signed-off-by: Jiang Liu <[email protected]> Cc: Michal Simek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-04-29mm/microblaze: use common help functions to free reserved pagesJiang Liu2-27/+2
Use common help functions to free reserved pages. Signed-off-by: Jiang Liu <[email protected]> Cc: Michal Simek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-04-17idle: Remove GENERIC_IDLE_LOOP config switchThomas Gleixner1-1/+0
All archs are converted over. Remove the config switch and the fallback code. Signed-off-by: Thomas Gleixner <[email protected]>
2013-04-16Remove GENERIC_GPIO config optionAlexandre Courbot1-3/+0
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Grant Likely <[email protected]>
2013-04-08microblaze: Use generic idle loopThomas Gleixner3-56/+2
The microblaze idle loop provides a polling and a non polling version, which are suprisingly both polling, just with slightly different instrumentation. Remove them and use the generic poller. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Rusty Russell <[email protected]> Cc: Paul McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Reviewed-by: Cc: Srivatsa S. Bhat <[email protected]> Cc: Magnus Damm <[email protected]> Cc: Michal Simek <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2013-04-08arch: Consolidate tsk_is_polling()Thomas Gleixner1-1/+0
Move it to a common place. Preparatory patch for implementing set/clear for the idle need_resched poll implementation. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Rusty Russell <[email protected]> Cc: Paul McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Reviewed-by: Cc: Srivatsa S. Bhat <[email protected]> Cc: Magnus Damm <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2013-04-08arch: Cleanup enable/disable_hltThomas Gleixner2-14/+0
enable/disable_hlt() does not need to be exported and can be killed on architectures which do not use it at all. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Rusty Russell <[email protected]> Cc: Paul McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Reviewed-by: Cc: Srivatsa S. Bhat <[email protected]> Cc: Magnus Damm <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2013-03-20memblock: Kill ARCH_POPULATES_NODE_MAP once morePaul Bolle1-3/+0
The Kconfig symbol ARCH_POPULATES_NODE_MAP was killed in v3.3. After that it popped up again in microblaze and metag. Nobody noticed, probably because these Kconfig symbols are entirely unused and these architectures both select HAVE_MEMBLOCK_NODE_MAP. Anyhow, these two entries can also be killed. Signed-off-by: Paul Bolle <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: James Hogan <[email protected]>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell1-1/+1
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-03-03consolidate cond_syscall and SYSCALL_ALIAS declarationsAl Viro1-8/+0
take them to asm/linkage.h, with default in linux/linkage.h Signed-off-by: Al Viro <[email protected]>
2013-02-27arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell1-0/+1
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <[email protected]> Reviewed-by: James Hogan <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: H Hartley Sweeten <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: James Bottomley <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-02-26Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds46-327/+295
Pull microblaze update from Michal Simek: "Microblaze changes. After my discussion with Arnd I have also added there asm-generic io patch which is Acked by him and Geert." * 'next' of git://git.monstr.eu/linux-2.6-microblaze: asm-generic: io: Fix ioread16/32be and iowrite16/32be microblaze: Do not use module.h in files which are not modules microblaze: Fix coding style issues microblaze: Add missing return from debugfs_tlb microblaze: Makefile clean microblaze: Add .gitignore entries for auto-generated files microblaze: Fix strncpy_from_user macro
2013-02-25Merge tag 'pm+acpi-fixes-3.9-rc1' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Fixes for blackfin and microblaze build problems introduced by the removal of global pm_idle. From Lars-Peter Clausen. - OPP core build fix from Shawn Guo. - Error condition check fix for the new imx6q-cpufreq driver from Wei Yongjun. - Fix for an AER driver crash related to the lack of APEI initialization for acpi=off. From Rafael J Wysocki. - Fix for a USB breakage on Thinkpad T430 related to ACPI power resources and PCI wakeup from Rafael J. Wysocki. * tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Take unusual configurations of power resources into account imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe() PM / OPP: fix condition for empty of_init_opp_table() ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off microblaze idle: Fix compile error blackfin idle: Fix compile error
2013-02-23Merge branch 'for-linus' of ↵Linus Torvalds5-80/+54
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
2013-02-23microblaze idle: Fix compile errorLars-Peter Clausen1-4/+1
Commit def8203 ("microblaze idle: delete pm_idle") introduced the following compile error: arch/microblaze/kernel/process.c: In function 'cpu_idle': arch/microblaze/kernel/process.c:100: error: 'idle' undeclared (first use in this function) arch/microblaze/kernel/process.c:100: error: (Each undeclared identifier is reported only once arch/microblaze/kernel/process.c:100: error: for each function it appears in.) arch/microblaze/kernel/process.c:106: error: implicit declaration of function 'idle' This patch fixes it. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-17microblaze idle: delete pm_idleLen Brown1-3/+0
pm_idle on microblaze served no purpose. Signed-off-by: Len Brown <[email protected]> Cc: [email protected]
2013-02-14burying unused conditionalsAl Viro2-3/+0
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
2013-02-12microblaze: Do not use module.h in files which are not modulesMichal Simek23-22/+23
Based on the patch: "lib: reduce the use of module.h wherever possible" (sha1: 8bc3bcc93a2b4e47d5d410146f6546bca6171663) fix all microblaze files which are not modules. Signed-off-by: Michal Simek <[email protected]>
2013-02-12microblaze: Fix coding style issuesMichal Simek32-294/+259
Fix coding style issues reported by checkpatch.pl. Signed-off-by: Michal Simek <[email protected]>
2013-02-12microblaze: Add missing return from debugfs_tlbMichal Simek1-0/+2
Function must return any value. Signed-off-by: Michal Simek <[email protected]>
2013-02-12microblaze: Makefile cleanJason Wu1-6/+3
Remove unnecessary variables Signed-off-by: Jason Wu <[email protected]> Acked-by: Michal Simek <[email protected]>
2013-02-12microblaze: Add .gitignore entries for auto-generated filesLars-Peter Clausen2-0/+4
Add .gitignore entries for files which are generated during the build process. Signed-off-by: Lars-Peter Clausen <[email protected]>
2013-02-12microblaze: Fix strncpy_from_user macroMichal Simek1-5/+4
Problem happens when len in strncpy_from_user is setup and passing string has len-1 chars + \0 terminated character. In this case was returned incorrect length of the string. It should always retunrs the length of the string (not including the trailing NULL). Signed-off-by: Michal Simek <[email protected]>
2013-02-03microblaze: remove debris in ptrace.cAl Viro1-23/+0
Signed-off-by: Al Viro <[email protected]>
2013-02-03microblaze: Move restart allowed out of blockMichal Simek1-1/+1
Better not to break block which do work together. Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Al Viro <[email protected]>
2013-02-03microblaze: fix handling of multiple pending signalsAl Viro2-29/+42
We need to keep building sigframes until no pending signals remain. Wrap do_notify_resume() calls into loops; do _not_ allow syscall restart logics to trigger after the first iteration. Incidentally, comments about pending signals that should (somehow) be in r18 are pure BS. Doesn't work that way and cannot work that way, sorry... Signed-off-by: Al Viro <[email protected]>
2013-02-03microblaze: fix the horror with restarts of sigreturn()Al Viro2-2/+7
solution a-la arm one - pick a callee-saved register (r30), set it non-zero when entering a syscall, have sigreturn wrapper zero it out and pass the value in it to do_notify_resume() as "in_syscall" (actually, "restarts allowed") argument. Note that we don't give a damn about ret_from_fork() - return value is not restart-worthy anyway. Possible remaining bug: on !MMU we still have _debug_exception() restartable. If it hits with -ERESTART_... accidentally in r3, fun happens. MMU does _not_ have _debug_exception() restartable. If that's decided to be a bug (as I strongly suspect it to be), we'll just need to replace setting r30 to 1 with setting r30 to 0 in !MMU _debug_exception(). Up to microblaze maintainers... [folded a fix from Michal] Signed-off-by: Al Viro <[email protected]>
2013-02-03microblaze: evict the check for kernel_mode(regs) from do_notify_resume()Al Viro2-9/+3
Only one caller hasn't done it in assembler - work_pending on !MMU. Everything else can't reach do_notify_resume() if we are returning to kernel mode, so move that check to that sole caller and make do_notify_resume() reachable only when returning to userland. Signed-off-by: Al Viro <[email protected]>
2013-02-03microblaze: switch to generic sigaltstackAl Viro2-15/+3
Signed-off-by: Al Viro <[email protected]>
2013-01-17arch/microblaze/platform: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Acked-by: Michal Simek <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-01-07Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds8-56/+90
Pull microblaze update from Michal Simek: "This fixes noMMU kernel and I have also added defconfig updates which fix issue with one external dependency and enable all xilinx device drivers for 0-day testing system. Additionally wire up finit_module system call, and do highmem fixup and pci warnings reported by the 0-day testing system" * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Update microblaze defconfigs microblaze: Fix pci compilation and sparse warnings microblaze: Add finit_module syscall microblaze: Kill __kmap_atomic() microblaze: Change section flags for noMMU microblaze: Microblaze wants sys_fork for noMMU too
2013-01-04microblaze: Update microblaze defconfigsMichal Simek2-45/+80
The main reason is 0-day testing system which can directly use these defconfigs for testing. Enable support for all xilinx drivers which Microblaze can use and disable dependency on external rootfs.cpio. There is only one exception which is axi ethernet driver which still uses NO_IRQ which is not defined for Microblaze. Signed-off-by: Michal Simek <[email protected]>
2013-01-04microblaze: Fix pci compilation and sparse warningsMichal Simek1-6/+5
Warning log: CHECK arch/microblaze/pci/pci-common.c arch/microblaze/pci/pci-common.c:290:14: warning: Using plain integer as NULL pointer arch/microblaze/pci/pci-common.c:1127:6: warning: symbol 'pcibios_allocate_bus_resources' was not declared. Should it be static? arch/microblaze/pci/pci-common.c:1436:61: warning: incorrect type in argument 3 (different base types) arch/microblaze/pci/pci-common.c:1436:61: expected unsigned int [unsigned] [usertype] offset arch/microblaze/pci/pci-common.c:1436:61: got void [noderef] <asn:2>* CC arch/microblaze/pci/pci-common.o arch/microblaze/pci/pci-common.c: In function 'pci_proc_domain': arch/microblaze/pci/pci-common.c:825:25: warning: unused variable 'hose' [-Wunused-variable] arch/microblaze/pci/pci-common.c: In function 'pcibios_allocate_bus_resources': arch/microblaze/pci/pci-common.c:1182:1: warning: label 'clear_resource' defined but not used [-Wunused-label] arch/microblaze/pci/pci-common.c: In function 'pcibios_setup_phb_resources': arch/microblaze/pci/pci-common.c:1436:2: warning: passing argument 3 of 'pci_add_resource_offset' makes integer from pointer without a cast [enabled by default] include/linux/pci.h:999:6: note: expected 'resource_size_t' but argument is of type 'void *' Signed-off-by: Michal Simek <[email protected]>
2013-01-03ARCH: drivers remove __dev* attributes.Greg Kroah-Hartman1-14/+14
This fixes up all of the smaller arches that had __dev* markings for their platform-specific drivers. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Haavard Skinnemoen <[email protected]> Cc: Hans-Christian Egtvedt <[email protected]> Cc: Mike Frysinger <[email protected]> Cc: Mikael Starvik <[email protected]> Cc: Jesper Nilsson <[email protected]> Cc: David Howells <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Michal Simek <[email protected]> Cc: Koichi Yasutake <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Helge Deller <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Chen Liqin <[email protected]> Cc: Lennox Wu <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Chris Metcalf <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Bob Liu <[email protected]> Cc: Srinivas Kandagatla <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Myron Stowe <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jesse Barnes <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: Yinghai Lu <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Grant Likely <[email protected]> Cc: "Srivatsa S. Bhat" <[email protected]> Cc: Mark Salter <[email protected]> Cc: Yong Zhang <[email protected]> Cc: Michael Holzheu <[email protected]> Cc: Cornelia Huck <[email protected]> Cc: Jan Glauber <[email protected]> Cc: Wei Yongjun <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-01-03microblaze: Add finit_module syscallMichal Simek2-1/+3
Add finit_module syscall to the syscall list. Signed-off-by: Michal Simek <[email protected]>
2013-01-03microblaze: Kill __kmap_atomic()Michal Simek1-1/+1
This should be the part of this patch: "highmem: kill all __kmap_atomic()" (sha1: a24401bcf4a67c8fe17e649e74eeb09b08b79ef5) Signed-off-by: Michal Simek <[email protected]>
2013-01-03microblaze: Change section flags for noMMUMichal Simek1-1/+1
All files which uses user unified macros from uaccess.h (get_user/put_user/clear_user/copy_tofrom_user/ strnlen_user and strncpy_user) generate this warning messages: Assembler messages: Warning: ignoring changed section attributes for .discard Setting up discard executable section flang for __EX_TABLE_SECTION macro removed all these warnings. Signed-off-by: Michal Simek <[email protected]>
2013-01-03microblaze: Microblaze wants sys_fork for noMMU tooMichal Simek1-2/+0
The patch "generic sys_fork / sys_vfork / sys_clone" (sha1: d2125043aebf7f53cd1c72115c17b01d0bc06ce1) introduced generic sys_fork with implementation for noMMU which returns EINVAL for noMMU. and the patch "microblaze: switch to generic fork/vfork/clone" (sha1: f3268edbe6fe0ce56e62c6d6b14640aeb04864b7) enable sys_fork only for MMU which is causing compilation failure on noMMU system. Signed-off-by: Michal Simek <[email protected]>
2012-12-20Merge branch 'for-linus' of ↵Linus Torvalds3-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "sigaltstack infrastructure + conversion for x86, alpha and um, COMPAT_SYSCALL_DEFINE infrastructure. Note that there are several conflicts between "unify SS_ONSTACK/SS_DISABLE definitions" and UAPI patches in mainline; resolution is trivial - just remove definitions of SS_ONSTACK and SS_DISABLED from arch/*/uapi/asm/signal.h; they are all identical and include/uapi/linux/signal.h contains the unified variant." Fixed up conflicts as per Al. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: alpha: switch to generic sigaltstack new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those generic compat_sys_sigaltstack() introduce generic sys_sigaltstack(), switch x86 and um to it new helper: compat_user_stack_pointer() new helper: restore_altstack() unify SS_ONSTACK/SS_DISABLE definitions new helper: current_user_stack_pointer() missing user_stack_pointer() instances Bury the conditionals from kernel_thread/kernel_execve series COMPAT_SYSCALL_DEFINE: infrastructure
2012-12-20Merge tag 'iommu-updates-v3.8' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "A few new features this merge-window. The most important one is probably, that dma-debug now warns if a dma-handle is not checked with dma_mapping_error by the device driver. This requires minor changes to some architectures which make use of dma-debug. Most of these changes have the respective Acks by the Arch-Maintainers. Besides that there are updates to the AMD IOMMU driver for refactor the IOMMU-Groups support and to make sure it does not trigger a hardware erratum. The OMAP changes (for which I pulled in a branch from Tony Lindgren's tree) have a conflict in linux-next with the arm-soc tree. The conflict is in the file arch/arm/mach-omap2/clock44xx_data.c which is deleted in the arm-soc tree. It is safe to delete the file too so solve the conflict. Similar changes are done in the arm-soc tree in the common clock framework migration. A missing hunk from the patch in the IOMMU tree will be submitted as a seperate patch when the merge-window is closed." * tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (29 commits) ARM: dma-mapping: support debug_dma_mapping_error ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks iommu/omap: Adapt to runtime pm iommu/omap: Migrate to hwmod framework iommu/omap: Keep mmu enabled when requested iommu/omap: Remove redundant clock handling on ISR iommu/amd: Remove obsolete comment iommu/amd: Don't use 512GB pages iommu/tegra: smmu: Move bus_set_iommu after probe for multi arch iommu/tegra: gart: Move bus_set_iommu after probe for multi arch iommu/tegra: smmu: Remove unnecessary PTC/TLB flush all tile: dma_debug: add debug_dma_mapping_error support sh: dma_debug: add debug_dma_mapping_error support powerpc: dma_debug: add debug_dma_mapping_error support mips: dma_debug: add debug_dma_mapping_error support microblaze: dma-mapping: support debug_dma_mapping_error ia64: dma_debug: add debug_dma_mapping_error support c6x: dma_debug: add debug_dma_mapping_error support ARM64: dma_debug: add debug_dma_mapping_error support intel-iommu: Prevent devices with RMRRs from being placed into SI Domain ...
2012-12-19missing user_stack_pointer() instancesAl Viro1-0/+1
for the architectures that have usp in pt_regs and do not have user_stack_pointer() already defined. Signed-off-by: Al Viro <[email protected]>
2012-12-19Bury the conditionals from kernel_thread/kernel_execve seriesAl Viro2-3/+0
All architectures have CONFIG_GENERIC_KERNEL_THREAD CONFIG_GENERIC_KERNEL_EXECVE __ARCH_WANT_SYS_EXECVE None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers of kernel_execve() (which is a trivial wrapper for do_execve() now) left. Kill the conditionals and make both callers use do_execve(). Signed-off-by: Al Viro <[email protected]>
2012-12-16Merge branches 'iommu/fixes', 'dma-debug', 'x86/amd', 'x86/vt-d', ↵Joerg Roedel1-0/+2
'arm/tegra' and 'arm/omap' into next
2012-12-13microblaze: signal: Declare do_notify_resumeMichal Simek2-1/+3
Fix sparse warning by declaration do_notify_resume function called from entry.S. Warning: arch/microblaze/kernel/signal.c:357:6: warning: symbol 'do_notify_resume' was not declared. Should it be static? Signed-off-by: Michal Simek <[email protected]>
2012-12-13microblaze: lib: Add lib function declarationsMichal Simek1-0/+7
Function declarations fix these sparse warnings: arch/microblaze/lib/ashldi3.c:5:11: warning: symbol '__ashldi3' was not declared. Should it be static? arch/microblaze/lib/muldi3.c:50:8: warning: symbol '__muldi3' was not declared. Should it be static? arch/microblaze/lib/cmpdi2.c:5:11: warning: symbol '__cmpdi2' was not declared. Should it be static? arch/microblaze/lib/lshrdi3.c:5:11: warning: symbol '__lshrdi3' was not declared. Should it be static? arch/microblaze/lib/ashrdi3.c:5:11: warning: symbol '__ashrdi3' was not declared. Should it be static? arch/microblaze/lib/ucmpdi2.c:5:11: warning: symbol '__ucmpdi2' was not declared. Should it be static? Signed-off-by: Michal Simek <[email protected]>
2012-12-13microblaze: lib: Remove helper macrosMichal Simek1-16/+12
Remove these gcc types and use standard types. Signed-off-by: Michal Simek <[email protected]>
2012-12-13microblaze: Add static qualifiersMichal Simek2-3/+3
Adding static to internal variables and functions. Sparse warnings: arch/microblaze/kernel/prom.c:55:6: warning: symbol 'stdout' was not declared. Should it be static? arch/microblaze/kernel/prom.c:57:12: warning: symbol 'early_init_dt_scan_chosen_serial' was not declared. Should it be static? CC arch/microblaze/kernel/prom.o arch/microblaze/kernel/intc.c:102:5: warning: symbol 'xintc_map' was not declared. Should it be static? CC arch/microblaze/kernel/intc.o Signed-off-by: Michal Simek <[email protected]>
2012-12-13microblaze: Wire-up new system call kcmpMichal Simek2-1/+3
Wire-up kcmp syscall. Signed-off-by: Michal Simek <[email protected]>
2012-12-13microblaze: Fix intc_enable_or_unmask functionMichal Simek1-1/+2
Intc_enable_or_unmask() is called at the last stage of handle_level_irq(). This function enables the irq first (Write INTC.SIE) and clear ISR next (Write INTC.IAR). This would create problems that processor will get into a new interrupt as soon as SIE is written because the previous level interrupt has been captured by INTC. If the description bring some puzzles, here is the details of how interrupt is handled for MicroBlaze after Interrupt signal is detected: 1. disable INTC (INTC.CIE = 1) 2. Acknowledge INTC (INTC.IAR = 1) 3. gets into interrupt source's handler, for example, timer's handler 4. Timer is interrupt handler acknowledge Timer Interrupt Status (Timer.TCSR0[23] = 1), and return 5. Enable INTC (INTC.SIE = 1) 6. Acknowledge INTC (INTC.IAR = 1) INTC continue to capture source inputs even if INTC is disabled (INTC.IER == 1). So between the gap of step 2 and step 3, the level interrupt from source makes INTC captures a new interrupt and thus the INTC.ISR = 1 during step 3, 4, and 5. When INTC is enabled in step 5, INTC's interrupt output will go high immediately. In summary, the driver should issue step 6 before step 5. Signed-off-by: Michal Simek <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.