aboutsummaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)AuthorFilesLines
2020-07-13m68k: mac: Fix IOP status/control register writesFinn Thain1-9/+3
When writing values to the IOP status/control register make sure those values do not have any extraneous bits that will clear interrupt flags. To place the SCC IOP into bypass mode would be desirable but this is not achieved by writing IOP_DMAINACTIVE | IOP_RUN | IOP_AUTOINC | IOP_BYPASS to the control register. Drop this ineffective register write. Remove the flawed and unused iop_bypass() function. Make use of the unused iop_stop() function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Cc: Joshua Thompson <[email protected]> Link: https://lore.kernel.org/r/09bcb7359a1719a18b551ee515da3c4c3cf709e6.1590880333.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-13m68k: mac: Don't send IOP message until channel is idleFinn Thain1-6/+3
In the following sequence of calls, iop_do_send() gets called when the "send" channel is not in the IOP_MSG_IDLE state: iop_ism_irq() iop_handle_send() (msg->handler)() iop_send_message() iop_do_send() Avoid this by testing the channel state before calling iop_do_send(). When sending, and iop_send_queue is empty, call iop_do_send() because the channel is idle. If iop_send_queue is not empty, iop_do_send() will get called later by iop_handle_send(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Cc: Joshua Thompson <[email protected]> Link: https://lore.kernel.org/r/6d667c39e53865661fa5a48f16829d18ed8abe54.1590880333.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-13m68k: atari: Annotate dummy read in ROM port IO code as __maybe_unusedMichael Schmitz1-3/+3
The Atari ROM port IO code uses dummy variables to implement writes (not supported by the hardware) as reads that encode the write data in part of the address. The value read from the ROM port in this operation is discarded. Annotate dummy variables as __maybe_unused to avoid a compiler warning with W=1. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Michael Schmitz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-13m68k: Use sizeof_field() helperGustavo A. R. Silva1-16/+16
Make use of the sizeof_field() helper instead of an open-coded version. Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200527133942.GA10408@embeddedor Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-13m68k: Pass -D options to KBUILD_CPPFLAGS instead of KBUILD_{A,C}FLAGSMasahiro Yamada1-3/+2
Precisely, -D is a preprocessor option. KBUILD_CPPFLAGS is passed for compiling .c and .S files too. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Greg Ungerer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-13m68k: Optimize cc-option calls for cpuflags-yMasahiro Yamada1-21/+24
arch/m68k/Makefile computes lots of unneeded cc-option calls. For example, if CONFIG_M5441x is not defined, there is not point in evaluating the following compiler flag. cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e) The result is set to cpuflags-, then thrown away. The right hand side of ':=' is immediately expanded. Hence, all of the 16 calls for cc-option are evaluated. This is expensive since cc-option invokes the compiler. This occurs even if you are not attempting to build anything, like 'make ARCH=m68k help'. Use '=' to expand the value _lazily_. The evaluation for cc-option is delayed until $(cpuflags-y) is expanded. So, the cc-option test happens just once at most. This commit mimics tune-y of arch/arm/Makefile. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Greg Ungerer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-13m68k: sun3: Descend to prom from arch/m68k/sun3Masahiro Yamada2-2/+2
Move prom/ to the more relevant Makefile. Signed-off-by: Masahiro Yamada <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-13m68k: Add arch/m68k/KbuildMasahiro Yamada2-19/+20
Use the standard obj-y form to specify the sub-directories under arch/m68k/. No functional change intended. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Greg Ungerer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-04arch: rename copy_thread_tls() back to copy_thread()Christian Brauner1-3/+2
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls() back simply copy_thread(). It's a simpler name, and doesn't imply that only tls is copied here. This finishes an outstanding chunk of internal process creation work since we've added clone3(). Cc: [email protected] Acked-by: Thomas Bogendoerfer <[email protected]>A Acked-by: Stafford Horne <[email protected]> Acked-by: Greentime Hu <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]>A Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2020-07-04arch: remove HAVE_COPY_THREAD_TLSChristian Brauner1-1/+0
All architectures support copy_thread_tls() now, so remove the legacy copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone uses the same process creation calling convention based on copy_thread_tls() and struct kernel_clone_args. This will make it easier to maintain the core process creation code under kernel/, simplifies the callpaths and makes the identical for all architectures. Cc: [email protected] Acked-by: Thomas Bogendoerfer <[email protected]> Acked-by: Greentime Hu <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2020-07-01block: move ->make_request_fn to struct block_device_operationsChristoph Hellwig1-2/+3
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-07-01nfblock: stop using ->queuedataChristoph Hellwig1-2/+1
Instead of setting up the queuedata as well just use one private data field. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-06-29m68k: mm: fix node memblock initAngelo Dureghello1-1/+1
After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was hanging silently. memblock_add() seems not appropriate, since using MAX_NUMNODES as node id, while memblock_add_node() sets up memory for node id 0. Signed-off-by: Angelo Dureghello <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Greg Ungerer <[email protected]>
2020-06-29m68k: nommu: register start of the memory with memblockMike Rapoport1-1/+2
The m68k nommu setup code didn't register the beginning of the physical memory with memblock because it was anyway occupied by the kernel. However, commit fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes") changed zones initialization to use memblock.memory to detect the zone extents and this caused inconsistency between zone PFNs and the actual PFNs: BUG: Bad page state in process swapper pfn:20165 page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000 page dumped because: nonzero mapcount CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1 Stack from 404c9ebc: 404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4 00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21 00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000 00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001 400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04 41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff Call Trace: [<40088470>] 0x40088470 [<40088504>] 0x40088504 [<40088a12>] 0x40088a12 [<402ca000>] 0x402ca000 [<400a0934>] 0x400a0934 Adjust the memory registration with memblock to include the beginning of the physical memory and make sure that the area occupied by the kernel is marked as reserved. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Greg Ungerer <[email protected]>
2020-06-22fork: fold legacy_clone_args_valid() into _do_fork()Christian Brauner1-3/+0
This separate helper only existed to guarantee the mutual exclusivity of CLONE_PIDFD and CLONE_PARENT_SETTID for legacy clone since CLONE_PIDFD abuses the parent_tid field to return the pidfd. But we can actually handle this uniformely thus removing the helper. For legacy clone we can detect that CLONE_PIDFD is specified in conjunction with CLONE_PARENT_SETTID because they will share the same memory which is invalid and for clone3() setting the separate pidfd and parent_tid fields to the same memory is bogus as well. So fold that helper directly into _do_fork() by detecting this case. Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Al Viro <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: "Peter Zijlstra (Intel)" <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>
2020-06-17arch: wire-up close_range()Christian Brauner1-0/+1
This wires up the close_range() syscall into all arches at once. Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Reviewed-by: Oleg Nesterov <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Acked-by: Michael Ellerman <[email protected]> (powerpc) Cc: Jann Horn <[email protected]> Cc: David Howells <[email protected]> Cc: Dmitry V. Levin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Al Viro <[email protected]> Cc: Florian Weimer <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected]
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds4-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada3-7/+7
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <[email protected]>
2020-06-11Merge tag 'm68knommu-for-v5.8' of ↵Linus Torvalds3-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: - casting clean up in the user access macros - memory leak on error case fix for PCI probing - update of a defconfig * tag 'm68knommu-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k,nommu: fix implicit cast from __user in __{get,put}_user_asm() m68k,nommu: add missing __user in uaccess' __ptr() macro m68k: Drop CONFIG_MTD_M25P80 in stmark2_defconfig m68k/PCI: Fix a memory leak in an error handling path
2020-06-11kbuild: fix broken builds because of GZIP,BZIP2,LZOP variablesDenis Efremov1-4/+4
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp. GZIP, BZIP2, LZOP env variables are reserved by the tools. The original attempt to redefine them internally doesn't work in makefiles/scripts intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in broken builds. There can be other broken build commands because of this, so the universal solution is to use non-reserved env variables for the compression tools. Fixes: 8dfb61dcbace ("kbuild: add variables for compression tools") Signed-off-by: Denis Efremov <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-09mmap locking API: convert mmap_sem API commentsMichel Lespinasse1-1/+1
Convert comments that reference old mmap_sem APIs to reference corresponding new mmap locking APIs instead. Signed-off-by: Michel Lespinasse <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Reviewed-by: Davidlohr Bueso <[email protected]> Reviewed-by: Daniel Jordan <[email protected]> Cc: David Rientjes <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Laurent Dufour <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ying Han <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse2-11/+11
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Daniel Jordan <[email protected]> Reviewed-by: Laurent Dufour <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: David Rientjes <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ying Han <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: consolidate pte_index() and pte_offset_*() definitionsMike Rapoport5-75/+10
All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [[email protected]: v2] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: update] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: update] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: fix x86 warning] [[email protected]: fix powerpc build] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: pgtable: add shortcuts for accessing kernel PMD and PTEMike Rapoport1-22/+4
The powerpc 32-bit implementation of pgtable has nice shortcuts for accessing kernel PMD and PTE for a given virtual address. Make these helpers available for all architectures. [[email protected]: microblaze: fix page table traversal in setup_rt_frame()] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: s/pmd_ptr_k/pmd_off_k/ in various powerpc places] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09m68k/mm: move {cache,nocahe}_page() definitions close to their userMike Rapoport3-84/+43
The cache_page() and nocache_page() functions are only used by the motorola MMU variant for setting caching attributes for the page table pages. Move the definitions of these functions from arch/m68k/include/asm/motorola_pgtable.h closer to their usage in arch/m68k/mm/motorola.c and drop unused definition in arch/m68k/include/asm/mcf_pgtable.h. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Greg Ungerer <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09m68k/mm/motorola: move comment about page table allocation funcitonsMike Rapoport2-6/+6
The comment about page table allocation functions resides in include/asm/motorola_pgtable.h while the functions live in include/asm/motorola_pgaloc.h. Move the comment close to the code. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport3-3/+3
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport6-7/+4
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport24-24/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09kernel: rename show_stack_loglvl() => show_stack()Dmitry Safonov1-8/+3
Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-09m68k: add show_stack_loglvl()Dmitry Safonov1-5/+11
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/[email protected]/T/#u Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-08module: move the set_fs hack for flush_icache_range to m68kChristoph Hellwig1-0/+4
flush_icache_range generally operates on kernel addresses, but for some reason m68k needed a set_fs override. Move that into the m68k code insted of keeping it in the module loader. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Jessica Yu <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Song Liu <[email protected]> Cc: Yonghong Song <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-08m68k: implement flush_icache_user_rangeChristoph Hellwig2-1/+8
Rename the current flush_icache_range to flush_icache_user_range as per commit ae92ef8a4424 ("PATCH] flush icache in correct context") there seems to be an assumption that it operates on user addresses. Add a flush_icache_range around it that for now is a no-op. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-08mm: rename flush_icache_user_range to flush_icache_user_pageChristoph Hellwig2-3/+3
The function currently known as flush_icache_user_range only operates on a single page. Rename it to flush_icache_user_page as we'll need the name flush_icache_user_range for something else soon. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Stefan Kristiansson <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Albert Ou <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-08m68knommu: use asm-generic/cacheflush.hChristoph Hellwig1-17/+2
m68knommu needs almost no cache flushing routines of its own. Rely on asm-generic/cacheflush.h for the defaults. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Greg Ungerer <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-06Merge tag 'kbuild-v5.8' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
2020-06-06kbuild: add variables for compression toolsDenis Efremov1-4/+4
Allow user to use alternative implementations of compression tools, such as pigz, pbzip2, pxz. For example, multi-threaded tools to speed up the build: $ make GZIP=pigz BZIP2=pbzip2 Variables _GZIP, _BZIP2, _LZOP are used internally because original env vars are reserved by the tools. The use of GZIP in gzip tool is obsolete since 2015. However, alternative implementations (e.g., pigz) still rely on it. BZIP2, BZIP, LZOP vars are not obsolescent. The credit goes to @grsecurity. As a sidenote, for multi-threaded lzma, xz compression one can use: $ export XZ_OPT="--threads=0" Signed-off-by: Denis Efremov <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-06-03m68k: mm: simplify detection of memory zone boundariesMike Rapoport2-13/+8
free_area_init() only requires the definition of maximal PFN for each of the supported zone rater than calculation of actual zone sizes and the sizes of the holes between the zones. After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP the free_area_init() is available to all architectures. Using this function instead of free_area_init_node() simplifies the zone detection. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Hoan Tran <[email protected]> [arm64] Cc: Baoquan He <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-03mm: free_area_init: use maximal zone PFNs rather than zone sizesMike Rapoport2-9/+6
Currently, architectures that use free_area_init() to initialize memory map and node and zone structures need to calculate zone and hole sizes. We can use free_area_init_nodes() instead and let it detect the zone boundaries while the architectures will only have to supply the possible limits for the zones. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Hoan Tran <[email protected]> [arm64] Reviewed-by: Baoquan He <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-03mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP optionMike Rapoport1-2/+2
CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Hoan Tran <[email protected]> [arm64] Acked-by: Catalin Marinas <[email protected]> [arm64] Cc: Baoquan He <[email protected]> Cc: Brian Cain <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-06-02Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-13/+14
Pull block driver updates from Jens Axboe: "On top of the core changes, here are the block driver changes for this merge window: - NVMe changes: - NVMe over Fibre Channel protocol updates, which also reach over to drivers/scsi/lpfc (James Smart) - namespace revalidation support on the target (Anthony Iliopoulos) - gcc zero length array fix (Arnd Bergmann) - nvmet cleanups (Chaitanya Kulkarni) - misc cleanups and fixes (me, Keith Busch, Sagi Grimberg) - use a SRQ per completion vector (Max Gurtovoy) - fix handling of runtime changes to the queue count (Weiping Zhang) - t10 protection information support for nvme-rdma and nvmet-rdma (Israel Rukshin and Max Gurtovoy) - target side AEN improvements (Chaitanya Kulkarni) - various fixes and minor improvements all over, icluding the nvme part of the lpfc driver" - Floppy code cleanup series (Willy, Denis) - Floppy contention fix (Jiri) - Loop CONFIGURE support (Martijn) - bcache fixes/improvements (Coly, Joe, Colin) - q->queuedata cleanups (Christoph) - Get rid of ioctl_by_bdev (Christoph, Stefan) - md/raid5 allocation fixes (Coly) - zero length array fixes (Gustavo) - swim3 task state fix (Xu)" * tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits) bcache: configure the asynchronous registertion to be experimental bcache: asynchronous devices registration bcache: fix refcount underflow in bcache_device_free() bcache: Convert pr_<level> uses to a more typical style bcache: remove redundant variables i and n lpfc: Fix return value in __lpfc_nvme_ls_abort lpfc: fix axchg pointer reference after free and double frees lpfc: Fix pointer checks and comments in LS receive refactoring nvme: set dma alignment to qword nvmet: cleanups the loop in nvmet_async_events_process nvmet: fix memory leak when removing namespaces and controllers concurrently nvmet-rdma: add metadata/T10-PI support nvmet: add metadata support for block devices nvmet: add metadata/T10-PI support nvme: add Metadata Capabilities enumerations nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len nvmet: rename nvmet_rw_len to nvmet_rw_data_len nvmet: add metadata characteristics for a namespace nvme-rdma: add metadata/T10-PI support nvme-rdma: introduce nvme_rdma_sgl structure ...
2020-06-02Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds4-3/+74
Pull MMC updates from Ulf Hansson: "MMC core: - Enable erase/discard/trim support for all (e)MMC/SD hosts - Export information through sysfs about enhanced RPMB support (eMMC v5.1+) - Align the initialization commands for SDIO cards - Fix SDIO initialization to prevent memory leaks and NULL pointer errors - Do not export undefined MMC_NAME/MODALIAS for SDIO cards - Export device/vendor field from common CIS for SDIO cards - Move SDIO IDs from functional drivers to the common SDIO header - Introduce the ->request_atomic() host ops MMC host: - Improve support for HW busy signaling for several hosts - Converting some DT bindings to the json-schema - meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller - meson-mx-sdio: Run a soft reset to recover from timeout/CRC error - mmci: Convert to use mmc_regulator_set_vqmmc() - mmci_stm32_sdmmc: Fix a couple of DMA bugs - mmci_stm32_sdmmc: Fix power on issue - renesas,mmcif,sdhci: Document r8a7742 DT bindings - renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions - renesas_sdhi: Improvements to the TAP selection - renesas_sdhi/tmio: Further fixup runtime PM management at ->remove() - sdhci: Introduce ops to dump vendor specific registers - sdhci-cadence: Fix PHY write sequence - sdhci-esdhc-imx: Improve tunings - sdhci-esdhc-imx: Enable GPIO card detect as system wakeup - sdhci-esdhc-imx: Add HS400 support for i.MX6SLL - sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller - m68k: mcf5441x: Add platform data to enable esdhc mmc controller - sdhci-msm: Improve HS400 tuning - sdhci-msm: Dump vendor specific registers at error - sdhci-msm: Add support for DLL/DDR properties provided from DT - sdhci-msm: Add support for the sm8250 variant - sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate() - sdhci-of-arasan: Add support for Intel Keem Bay variant - sdhci-of-arasan: Add support for Xilinx Versal SD variant - sdhci-of-dwcmshc: Add support for system suspend/resume - sdhci-of-dwcmshc: Fix UHS signaling support - sdhci-of-esdhc: Fix tuning for eMMC HS400 mode - sdhci-pci-gli: Add Genesys Logic GL9763E support - sdhci-sprd: Add support for the ->request_atomic() ops - sdhci-tegra: Avoid reading autocal timeout values when not applicable MEMSTICK: - Minor trivial update" * tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits) dt-bindings: mmc: Convert sdhci-pxa to json-schema mmc: sdhci-msm: Clear tuning done flag while hs400 tuning mmc: core: Export device/vendor ids from Common CIS for SDIO cards mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards mmc: sdhci-of-at91: fix CALCR register being rewritten mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning mmc: sdhci-esdhc-imx: fix the mask for tuning start point mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin mmc: mmci_sdmmc: fix DMA API warning max segment size mmc: mmci_sdmmc: fix DMA API warning overlapping mappings mmc: sdhci-of-arasan: Add support for Intel Keem Bay dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay mmc: sdhci-cadence: fix PHY write mmc: sdio: Sort all SDIO IDs in common include file mmc: sdio: Fix Cypress SDIO IDs macros in common include file mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file mmc: sdio: Move SDIO IDs from ath10k driver to common include file mmc: sdio: Move SDIO IDs from ath6kl driver to common include file mmc: sdio: Move SDIO IDs from smssdio driver to common include file mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file ...
2020-06-01Merge branch 'from-miklos' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Assorted patches from Miklos. An interesting part here is /proc/mounts stuff..." The "/proc/mounts stuff" is using a cursor for keeeping the location data while traversing the mount listing. Also probably worth noting is the addition of faccessat2(), which takes an additional set of flags to specify how the lookup is done (AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH). * 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: add faccessat2 syscall vfs: don't parse "silent" option vfs: don't parse "posixacl" option vfs: don't parse forbidden flags statx: add mount_root statx: add mount ID statx: don't clear STATX_ATIME on SB_RDONLY uapi: deprecate STATX_ALL utimensat: AT_EMPTY_PATH support vfs: split out access_override_creds() proc/mounts: add cursor aio: fix async fsync creds vfs: allow unprivileged whiteout creation
2020-06-01Merge branch 'uaccess.csum' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess/csum updates from Al Viro: "Regularize the sitation with uaccess checksum primitives: - fold csum_partial_... into csum_and_copy_..._user() - on x86 collapse several access_ok()/stac()/clac() into user_access_begin()/user_access_end()" * 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: default csum_and_copy_to_user(): don't bother with access_ok() take the dummy csum_and_copy_from_user() into net/checksum.h arm: switch to csum_and_copy_from_user() sh32: convert to csum_and_copy_from_user() m68k: convert to csum_and_copy_from_user() xtensa: switch to providing csum_and_copy_from_user() sparc: switch to providing csum_and_copy_from_user() parisc: turn csum_partial_copy_from_user() into csum_and_copy_from_user() alpha: turn csum_partial_copy_from_user() into csum_and_copy_from_user() ia64: turn csum_partial_copy_from_user() into csum_and_copy_from_user() ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user() x86: switch 32bit csum_and_copy_to_user() to user_access_{begin,end}() x86: switch both 32bit and 64bit to providing csum_and_copy_from_user() x86_64: csum_..._copy_..._user(): switch to unsafe_..._user() get rid of csum_partial_copy_to_user()
2020-06-01Merge tag 'm68k-for-v5.8-tag1' of ↵Linus Torvalds19-60/+102
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - several Mac fixes - defconfig updates - minor cleanups and fixes * tag 'm68k-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: tools: Replace zero-length array with flexible-array member m68k: Add missing __user annotation in get_user() m68k: mac: Avoid stuck ISM IOP interrupt on Quadra 900/950 m68k: mac: Remove misleading comment m68k: mac: Don't call via_flush_cache() on Mac IIfx m68k: defconfig: Update defconfigs for v5.7-rc1 m68k: amiga: config: Replace zero-length array with flexible-array member m68k: amiga: config: Mark expected switch fall-through
2020-05-30m68k,nommu: fix implicit cast from __user in __{get,put}_user_asm()Luc Van Oostenryck1-2/+2
The assembly for __get_user_asm() & __put_user_asm() uses memcpy() when the size is 8. However, the pointer is always a __user one while memcpy() expects a plain one and so this cast creates a lot of warnings when using Sparse. So, fix this by adding a cast to 'void __force *' at memcpy()'s argument. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Greg Ungerer <[email protected]>
2020-05-30m68k,nommu: add missing __user in uaccess' __ptr() macroLuc Van Oostenryck1-1/+1
The assembly for __get_user() & __put_user() uses a macro, __ptr(), to cast the pointer to 'unsigned long *' but the pointer is always a __user one and so this cast creates a lot of warnings when using Sparse. So, change to the cast to 'unsigned long __user *'. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Greg Ungerer <[email protected]>
2020-05-30m68k: Drop CONFIG_MTD_M25P80 in stmark2_defconfigBin Meng1-1/+0
Drop CONFIG_MTD_M25P80 that was removed in commit b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Signed-off-by: Bin Meng <[email protected]> Signed-off-by: Greg Ungerer <[email protected]>
2020-05-29m68k: convert to csum_and_copy_from_user()Al Viro2-3/+4
trivial access_ok() there... Signed-off-by: Al Viro <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.