| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While building we are getting warnings:
arch/m32r/mm/init.c:63:17: warning: unused variable 'low'
arch/m32r/mm/init.c:62:17: warning: unused variable 'max_dma'
max_dma and low are only used if CONFIG_MMU is defined. Lets declare
the variables inside the #ifdef.
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
the handler
Introduce faulthandler_disabled() and use it to check for irq context and
disabled pagefaults (via pagefault_disable()) in the pagefault handlers.
Please note that we keep the in_atomic() checks in place - to detect
whether in irq context (in which case preemption is always properly
disabled).
In contrast, preempt_disable() should never be used to disable pagefaults.
With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt
counter, and therefore the result of in_atomic() differs.
We validate that condition by using might_fault() checks when calling
might_sleep().
Therefore, add a comment to faulthandler_disabled(), describing why this
is needed.
faulthandler_disabled() and pagefault_disable() are defined in
linux/uaccess.h, so let's properly add that include to all relevant files.
This patch is based on a patch from Thomas Gleixner.
Reviewed-and-tested-by: Thomas Gleixner <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.
That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works. However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.
In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV. And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.
However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space. And user space really
expected SIGSEGV, not SIGBUS.
To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it. They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.
This is the mindless minimal patch to do this. A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.
Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.
Reported-and-tested-by: Takashi Iwai <[email protected]>
Tested-by: Jan Engelhardt <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # "s390 still compiles and boots"
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.
Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.
Signed-off-by: Johannes Weiner <[email protected]>
Reviewed-by: Michal Hocko <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: KAMEZAWA Hiroyuki <[email protected]>
Cc: azurIt <[email protected]>
Cc: KOSAKI Motohiro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Prepare for killing free_all_bootmem_node() by using free_all_bootmem().
Signed-off-by: Jiang Liu <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Prepare for removing num_physpages and simplify mem_init().
Signed-off-by: Jiang Liu <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Concentrate code to modify totalram_pages into the mm core, so the arch
memory initialized code doesn't need to take care of it. With these
changes applied, only following functions from mm core modify global
variable totalram_pages: free_bootmem_late(), free_all_bootmem(),
free_all_bootmem_node(), adjust_managed_page_count().
With this patch applied, it will be much more easier for us to keep
totalram_pages and zone->managed_pages in consistence.
Signed-off-by: Jiang Liu <[email protected]>
Acked-by: David Howells <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jeremy Fitzhardinge <[email protected]>
Cc: Jianguo Wu <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Kamezawa Hiroyuki <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Tang Chen <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wen Congyang <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Address more review comments from last round of code review.
1) Enhance free_reserved_area() to support poisoning freed memory with
pattern '0'. This could be used to get rid of poison_init_mem()
on ARM64.
2) A previous patch has disabled memory poison for initmem on s390
by mistake, so restore to the original behavior.
3) Remove redundant PAGE_ALIGN() when calling free_reserved_area().
Signed-off-by: Jiang Liu <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: David Howells <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jeremy Fitzhardinge <[email protected]>
Cc: Jianguo Wu <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Kamezawa Hiroyuki <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Tang Chen <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wen Congyang <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Change signature of free_reserved_area() according to Russell King's
suggestion to fix following build warnings:
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default]
free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL);
^
In file included from include/linux/mman.h:4:0,
from arch/arm/mm/init.c:15:
include/linux/mm.h:1301:22: note: expected 'long unsigned int' but argument is of type 'void *'
extern unsigned long free_reserved_area(unsigned long start, unsigned long end,
mm/page_alloc.c: In function 'free_reserved_area':
>> mm/page_alloc.c:5134:3: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default]
In file included from arch/mips/include/asm/page.h:49:0,
from include/linux/mmzone.h:20,
from include/linux/gfp.h:4,
from include/linux/mm.h:8,
from mm/page_alloc.c:18:
arch/mips/include/asm/io.h:119:29: note: expected 'const volatile void *' but argument is of type 'long unsigned int'
mm/page_alloc.c: In function 'free_area_init_nodes':
mm/page_alloc.c:5030:34: warning: array subscript is below array bounds [-Warray-bounds]
Also address some minor code review comments.
Signed-off-by: Jiang Liu <[email protected]>
Reported-by: Arnd Bergmann <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: David Howells <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jeremy Fitzhardinge <[email protected]>
Cc: Jianguo Wu <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Kamezawa Hiroyuki <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Tang Chen <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wen Congyang <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use common help functions to free reserved pages.
Also include <asm/sections.h> to avoid local declarations.
Signed-off-by: Jiang Liu <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Disintegrate asm/system.h for M32R.
Signed-off-by: David Howells <[email protected]>
cc: [email protected]
|
|
For m32r, N_NORMAL_MEMORY represents all nodes that have present memory
since it does not support HIGHMEM. This patch sets the bit at the time
the node is initialized.
If N_NORMAL_MEMORY is not accurate, slub may encounter errors since it
uses this nodemask to setup per-cache kmem_cache_node data structures.
Signed-off-by: David Rientjes <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fold all the mmu_gather rework patches into one for submission
Signed-off-by: Peter Zijlstra <[email protected]>
Reported-by: Hugh Dickins <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: David Miller <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Russell King <[email protected]>
Cc: Paul Mundt <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: KAMEZAWA Hiroyuki <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: KOSAKI Motohiro <[email protected]>
Cc: Nick Piggin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page
fault") , we want to call the architecture independent oom killer when
getting an unexplained OOM from handle_mm_fault, rather than simply
killing current.
Signed-off-by: Nick Piggin <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <[email protected]>
Guess-its-ok-by: Christoph Lameter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lee Schermerhorn <[email protected]>
|
|
On VIVT ARM, when we have multiple shared mappings of the same file
in the same MM, we need to ensure that we have coherency across all
copies. We do this via make_coherent() by making the pages
uncacheable.
This used to work fine, until we allowed highmem with highpte - we
now have a page table which is mapped as required, and is not available
for modification via update_mmu_cache().
Ralf Beache suggested getting rid of the PTE value passed to
update_mmu_cache():
On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables
to construct a pointer to the pte again. Passing a pte_t * is much
more elegant. Maybe we might even replace the pte argument with the
pte_t?
Ben Herrenschmidt would also like the pte pointer for PowerPC:
Passing the ptep in there is exactly what I want. I want that
-instead- of the PTE value, because I have issue on some ppc cases,
for I$/D$ coherency, where set_pte_at() may decide to mask out the
_PAGE_EXEC.
So, pass in the mapped page table pointer into update_mmu_cache(), and
remove the PTE value, updating all implementations and call sites to
suit.
Includes a fix from Stephen Rothwell:
sparc: fix fallout from update_mmu_cache API change
Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Russell King <[email protected]>
|
|
In case CONFIG_DISCONTIGMEM is set, the memory size of system was
always determined by CONFIG_MEMORY_SIZE and was not changeable.
This patch fixes set_memory() of arch/m32r/mm/discontig.c so that
we can specify memory size by the "mem=<size>" kernel parameter.
Signed-off-by: Hirokazu Takata <[email protected]>
|
|
Fix pmd_bad check code of tme_handler (TLB Miss Exception handler).
The correct _KERNPG_TABLE value is not 0x263(=611) but 0x163.
Signed-off-by: Hirokazu Takata <[email protected]>
|
|
Commit 96177299416dbccb73b54e6b344260154a445375 ("Drop free_pages()")
modified nr_free_pages() to return 'unsigned long' instead of 'unsigned
int'. This made the casts to 'unsigned long' in most callers superfluous,
so remove them.
[[email protected]: coding-style fixes]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Christoph Lameter <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Acked-by: Russell King <[email protected]>
Acked-by: David S. Miller <[email protected]>
Acked-by: Kyle McMartin <[email protected]>
Acked-by: WANG Cong <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Haavard Skinnemoen <[email protected]>
Cc: Mikael Starvik <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: David Howells <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Paul Mundt <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Michal Simek <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault(). All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.
Signed-off-by: Linus Torvalds <[email protected]>
|
|
ALLOC_WMARK_MIN, ALLOC_WMARK_LOW and ALLOC_WMARK_HIGH determin whether
pages_min, pages_low or pages_high is used as the zone watermark when
allocating the pages. Two branches in the allocator hotpath determine
which watermark to use.
This patch uses the flags as an array index into a watermark array that is
indexed with WMARK_* defines accessed via helpers. All call sites that
use zone->pages_* are updated to use the helpers for accessing the values
and the array offsets for setting.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Christoph Lameter <[email protected]>
Cc: KOSAKI Motohiro <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Nick Piggin <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Lee Schermerhorn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
PFN_PHYS, as its name suggests, turns a pfn into a physical address.
However, it is a macro which just operates on its argument without
modifying its type. pfns are typed unsigned long, but an unsigned
long may not be long enough to hold a physical address (32-bit systems
with more than 32 bits of physcial address).
Make sure we cast to phys_addr_t to return a complete result.
Signed-off-by: Jeremy Fitzhardinge <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Remove arch-specific show_mem() in favor of the generic version.
This also removes the following redundant information display:
- free swap pages, printed by show_swap_cache_info()
- pages in swapcache, printed by show_swap_cache_info()
where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: Johannes Weiner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Almost all users of this field need a PFN instead of a physical address,
so replace node_boot_start with node_min_pfn.
[[email protected]: fix spurious BUG_ON() in mark_bootmem()]
Signed-off-by: Johannes Weiner <[email protected]>
Cc: <[email protected]>
Signed-off-by: Lee Schermerhorn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
free_area_init_node() gets passed in the node id as well as the node
descriptor. This is redundant as the function can trivially get the node
descriptor itself by means of NODE_DATA() and the node's id.
I checked all the users and NODE_DATA() seems to be usable everywhere
from where this function is called.
Signed-off-by: Johannes Weiner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are a lot of places that define either a single bootmem descriptor or an
array of them. Use only one central array with MAX_NUMNODES items instead.
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Ralf Baechle <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Russell King <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Kyle McMartin <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Paul Mundt <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Andy Whitcroft <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patchset adds a flags variable to reserve_bootmem() and uses the
BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions
between crashkernel area and already used memory.
This patch:
Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE.
If that flag is set, the function returns with -EBUSY if the memory already
has been reserved in the past. This is to avoid conflicts.
Because that code runs before SMP initialisation, there's no race condition
inside reserve_bootmem_core().
[[email protected]: coding-style fixes]
[[email protected]: fix powerpc build]
Signed-off-by: Bernhard Walle <[email protected]>
Cc: <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Vivek Goyal <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
is_init() is an ambiguous name for the pid==1 check. Split it into
is_global_init() and is_container_init().
A cgroup init has it's tsk->pid == 1.
A global init also has it's tsk->pid == 1 and it's active pid namespace
is the init_pid_ns. But rather than check the active pid namespace,
compare the task structure with 'init_pid_ns.child_reaper', which is
initialized during boot to the /sbin/init process and never changes.
Changelog:
2.6.22-rc4-mm2-pidns1:
- Use 'init_pid_ns.child_reaper' to determine if a given task is the
global init (/sbin/init) process. This would improve performance
and remove dependence on the task_pid().
2.6.21-mm2-pidns2:
- [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc,
ppc,avr32}/traps.c for the _exception() call to is_global_init().
This way, we kill only the cgroup if the cgroup's init has a
bug rather than force a kernel panic.
[[email protected]: fix comment]
[[email protected]: Use is_global_init() in arch/m32r/mm/fault.c]
[[email protected]: kernel/pid.c: remove unused exports]
[[email protected]: Fix capability.c to work with threaded init]
Signed-off-by: Serge E. Hallyn <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Acked-by: Pavel Emelianov <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Cedric Le Goater <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Herbert Poetzel <[email protected]>
Cc: Kirill Korotaev <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We have had complaints where a threaded application is left in a bad state
after one of it's threads is killed when we hit a VM: out_of_memory
condition.
Killing just one of the process threads can leave the application in a bad
state, whereas killing the entire process group would allow for the
application to restart, or be otherwise handled, and makes it very obvious
that something has gone wrong.
This change allows the entire process group to be taken down, rather
than just the one thread.
Signed-off-by: Will Schmidt <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Russell King <[email protected]>
Cc: Ian Molton <[email protected]>
Cc: Haavard Skinnemoen <[email protected]>
Cc: Mikael Starvik <[email protected]>
Cc: David Howells <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Roman Zippel <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Kyle McMartin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Paul Mundt <[email protected]>
Cc: Kazumoto Kojima <[email protected]>
Cc: Richard Curnow <[email protected]>
Cc: William Lee Irwin III <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Chris Zankel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer. This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).
[[email protected]: fix alpha build]
[[email protected]: fix s390 build]
[[email protected]: fix sparc build]
[[email protected]: fix sparc64 build]
[[email protected]: fix ia64 build]
Signed-off-by: Nick Piggin <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Russell King <[email protected]>
Cc: Ian Molton <[email protected]>
Cc: Bryan Wu <[email protected]>
Cc: Mikael Starvik <[email protected]>
Cc: David Howells <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Roman Zippel <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Paul Mundt <[email protected]>
Cc: Kazumoto Kojima <[email protected]>
Cc: Richard Curnow <[email protected]>
Cc: William Lee Irwin III <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Paolo 'Blaisorblade' Giarrusso <[email protected]>
Cc: Miles Bader <[email protected]>
Cc: Chris Zankel <[email protected]>
Acked-by: Kyle McMartin <[email protected]>
Acked-by: Haavard Skinnemoen <[email protected]>
Acked-by: Ralf Baechle <[email protected]>
Acked-by: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix the tlb-miss handler (tme_handler) to check _PAGE_PRESENT bit
in order to handle file-mapped or swapped-out pages correctly.
This patch is required to fix unexpected page errors for m32r.
Signed-off-by: Hitoshi Yamamoto <[email protected]>
Signed-off-by: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Part of long forgotten patch
http://groups.google.com/group/fa.linux.kernel/msg/e98e941ce1cf29f6?dmode=source
Since then, m32r grabbed two copies.
Leave s390 copy because of important absence of CONFIG_VT, but remove
references to non-existent timerlist_lock. ia64 also loses timerlist_lock.
Signed-off-by: Alexey Dobriyan <[email protected]>
Acked-by: Martin Schwidefsky <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Cosmetic updates and trivial fixes of m32r arch-dependent files.
- Remove RCS ID strings and trailing white lines
- Other misc. cosmetic updates
Signed-off-by: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix do_page_fault and update_mmu_cache.
* Fix do_page_fault (vmalloc_fault:) to pass error_code correctly
to update_mmu_cache by using a thread-fault code for all m32r chips.
* Fix update_mmu_cache for OPSP chip
- #ifdef CONFIG_CHIP_OPSP portion is a workaround of OPSP;
Add a notfound-case operation to update_mmu_cache for OPSP
like other m32r chip.
- Fix pte_data that was not initialized if no entry found.
Signed-off-by: Kazuhiro Inaoka <[email protected]>
Signed-off-by: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Don't mask the lower 12-bit of the page fault address.
In the current m32r kernel implementation, we use an access exception
to detect page faults.
This patch fixes ace_handler (access exception handler) for m32r. In order to
check userspace address in do_page_fault, we have to pass full 32-bit address
to do_page_fault.
Signed-off-by: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After LOADER_TYPE && INITRD_START are true, the short if-condition
for INITRD_START can never be false.
Remove unused code from the else condition.
Signed-off-by: Henry Nestler <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kbuild explicitly includes this at build time.
Signed-off-by: Dave Jones <[email protected]>
|
|
Convert m32r to use generic ioremap_page_range()
Signed-off-by: Haavard Skinnemoen <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This is an updated version of Eric Biederman's is_init() patch.
(http://lkml.org/lkml/2006/2/6/280). It applies cleanly to 2.6.18-rc3 and
replaces a few more instances of ->pid == 1 with is_init().
Further, is_init() checks pid and thus removes dependency on Eric's other
patches for now.
Eric's original description:
There are a lot of places in the kernel where we test for init
because we give it special properties. Most significantly init
must not die. This results in code all over the kernel test
->pid == 1.
Introduce is_init to capture this case.
With multiple pid spaces for all of the cases affected we are
looking for only the first process on the system, not some other
process that has pid == 1.
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Serge Hallyn <[email protected]>
Cc: Cedric Le Goater <[email protected]>
Cc: <[email protected]>
Acked-by: Paul Mackerras <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix array initialization in lots of arches
The number of zones may now be reduced from 4 to 2 for many arches. Fix the
array initialization for the zones array for all architectures so that it is
not initializing a fixed number of elements.
Signed-off-by: Christoph Lameter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Signed-off-by: Jörn Engel <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
Signed-off-by: Adrian Bunk <[email protected]>
|
|
Just about every architecture defines some macros to do operations on pfns.
They're all virtually identical. This patch consolidates all of them.
One minor glitch is that at least i386 uses them in a very skeletal header
file. To keep away from #include dependency hell, I stuck the new
definitions in a new, isolated header.
Of all of the implementations, sh64 is the only one that varied by a bit.
It used some masks to ensure that any sign-extension got ripped away before
the arithmetic is done. This has been posted to that sh64 maintainers and
the development list.
Compiles on x86, x86_64, ia64 and ppc64.
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Because pgdat_list was linked to pgdat_list in *reverse* order, (By default)
some of arch has to sort it by themselves.
for_each_pgdat has gone..for_each_online_pgdat() uses node_online_map, which
doesn't need to be sorted.
This patch removes codes for sorting pgdat.
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Replace for_each_pgdat() with for_each_online_pgdat().
Signed-off-by: KAMEZAWA Hiroyuki <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
set_page_count usage outside mm/ is limited to setting the refcount to 1.
Remove set_page_count from outside mm/, and replace those users with
init_page_count() and set_page_refcounted().
This allows more debug checking, and tighter control on how code is allowed
to play around with page->_count.
Signed-off-by: Nick Piggin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch fixes cache memory parameter setting for the M32104 target. So
far, its performance seemed to have been degraded due to incorrect cache
parameter setting.
* arch/m32r/boot/setup.S: Set SFR(Special Fuction Registers) region
to be non-cachable explicitly.
* arch/m32r/mm/cache.c: Fix cache flushing routines not to switch off
the M32104 cache.
Signed-off-by: Hayato Fujiwara <[email protected]>
Signed-off-by: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch is for supporting a new target platform, Renesas M32104UT
evaluation board.
The M32104UT is an eval board based on an uT-Engine specification. This board
has an MMU-less M32R family processor, M32104.
http://www-wa0.personal-media.co.jp/pmc/archive/te/te_m32104_e.pdf
This board is one of the most popular M32R platform, so we have ported
Linux/M32R to it.
Signed-off-by: Naoto Sugai <[email protected]>
Signed-off-by: Hirokazu Takata <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|