| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2019-08-16 | ia64: remove support for machvecs | Christoph Hellwig | 1 | -1/+0 | |
| The only thing remaining of the machvecs is a few checks if we are running on an SGI UV system. Replace those with the existing is_uv_system() check that has been rewritten to simply check the OEM ID directly. That leaves us with a generic kernel that is as fast as the previous DIG/ZX1/UV kernels, but can support all hardware. Support for UV and the HP SBA IOMMU is now optional based on new config options. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Tony Luck <[email protected]> | |||||
| 2019-05-21 | treewide: Add SPDX license identifier for more missed files | Thomas Gleixner | 1 | -0/+1 | |
| Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> | |||||
| 2018-10-31 | mm: remove include/linux/bootmem.h | Mike Rapoport | 1 | -1/+1 | |
| Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [[email protected]: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Burton <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Serge Semin <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> | |||||
| 2018-06-12 | treewide: kmalloc() -> kmalloc_array() | Kees Cook | 1 | -1/+2 | |
| The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]> | |||||
| 2013-03-19 | Remove cast for kmalloc return value | Zhang Yanfei | 1 | -1/+1 | |
| remove cast for kmalloc return value. Signed-off-by: Zhang Yanfei <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2012-09-21 | userns: On ia64 deal with current_uid and current_gid being kuid and kgid | Eric W. Biederman | 1 | -1/+2 | |
| These ia64 uses of current_uid and current_gid slipped through the cracks when I was converting everything to kuids and kgids convert them now. Cc: Tony Luck <[email protected]> Cc: Fenghua Yu <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]> | |||||
| 2012-03-28 | Disintegrate asm/system.h for IA64 | David Howells | 1 | -1/+0 | |
| Disintegrate asm/system.h for IA64. Signed-off-by: David Howells <[email protected]> Acked-by: Tony Luck <[email protected]> cc: [email protected] | |||||
| 2010-03-30 | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵ | Tejun Heo | 1 | -0/+1 | |
| implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <[email protected]> Guess-its-ok-by: Christoph Lameter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Lee Schermerhorn <[email protected]> | |||||
| 2008-11-14 | CRED: Wrap task credential accesses in the IA64 arch | David Howells | 1 | -1/+1 | |
| Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <[email protected]> Reviewed-by: James Morris <[email protected]> Acked-by: Serge Hallyn <[email protected]> Cc: Tony Luck <[email protected]> Cc: [email protected] Signed-off-by: James Morris <[email protected]> | |||||
| 2008-02-04 | [IA64] mca style cleanup | Hidetoshi Seto | 1 | -1/+1 | |
| Unified changelog, 80 columns rule, and address form fix. Signed-off-by: Hidetoshi Seto <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2007-05-11 | [IA64] spelling fixes: arch/ia64/ | Simon Arlott | 1 | -2/+2 | |
| Spelling and apostrophe fixes in arch/ia64/. Signed-off-by: Simon Arlott <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2007-05-08 | header cleaning: don't include smp_lock.h when not used | Randy Dunlap | 1 | -1/+0 | |
| Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> | |||||
| 2007-03-08 | [IA64] Cache error recovery | Russ Anderson | 1 | -21/+11 | |
| Similar to memory error recovery, when a cache error is consumed by a user process terminate the user instead of crashing the system. Signed-off-by: Russ Anderson ([email protected]) Acked-by: Hidetoshi Seto <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2007-03-08 | [IA64] Proper handling of TLB errors from duplicate itr.d dropins | Russ Anderson | 1 | -0/+33 | |
| Jack Steiner noticed that duplicate TLB DTC entries do not cause a linux panic. See discussion: http://www.gelato.unsw.edu.au/archives/linux-ia64/0307/6108.html The current TLB recovery code is recovering from the duplicate itr.d dropins, masking the underlying problem. This change modifies the MCA recovery code to look for the TLB check signature of the duplicate TLB entry and panic in that case. Signed-off-by: Russ Anderson ([email protected]) Signed-off-by: Tony Luck <[email protected]> | |||||
| 2006-10-31 | [IA64] MCA recovery: Montecito support | Russ Anderson | 1 | -27/+68 | |
| The information in MCA records is filled in slightly differently on Montecito than on Madison/McKinley. Usually, the cache check and bus check target identifiers have the same address. On Montecito the cache check and bus check target identifiers can be different if a corrected error (ie SBE or unconsumed poison data) was encountered and then an uncorrected error (ie DBE) was consumed. In that case, the cache check target identifier is the physical address of the DBE (that caused the MCA to surface) while the bus check target identifier is the physical address of the SBE. This patch correctly finds the target identifier that triggered the MCA. If there are multiple valid cache target identifiers in the same error record then use the one with the lowest cache level. Signed-off-by: Russ Anderson ([email protected]) Signed-off-by: Tony Luck <[email protected]> | |||||
| 2006-09-26 | [IA64] printing support for MCA/INIT | Hidetoshi Seto | 1 | -18/+36 | |
| Printing message to console from MCA/INIT handler is useful, however doing oops_in_progress = 1 in them exactly makes something in kernel wrong. Especially it sounds ugly if system goes wrong after returning from recoverable MCA. This patch adds ia64_mca_printk() function that collects messages into temporary-not-so-large message buffer during in MCA/INIT environment and print them out later, after returning to normal context or when handlers determine to down the system. Also this print function is exported for use in extensional MCA handler. It would be useful to describe detail about recovery. NOTE: I don't think it is sane thing if temporary message buffer is enlarged enough to hold whole stack dumps from INIT, so buffering is disabled during stack dump from INIT-monarch (= default_monarch_init_process). please fix it in future. Signed-off-by: Hidetoshi Seto <[email protected]> Acked-by: Russ Anderson <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2006-06-30 | Remove obsolete #include <linux/config.h> | Jörn Engel | 1 | -1/+0 | |
| Signed-off-by: Jörn Engel <[email protected]> Signed-off-by: Adrian Bunk <[email protected]> | |||||
| 2006-04-27 | [IA64] Add mca recovery failure messages | Russ Anderson | 1 | -18/+36 | |
| When the mca recovery code encounters a condition that makes the MCA non-recoverable, print the reason it could not recover. This will make it easier to identify why the recovery code did not recover. Signed-off-by: Russ Anderson <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2006-03-24 | [IA64] MCA recovery: kernel context recovery table | Russ Anderson | 1 | -7/+15 | |
| Memory errors encountered by user applications may surface when the CPU is running in kernel context. The current code will not attempt recovery if the MCA surfaces in kernel context (privilage mode 0). This patch adds a check for cases where the user initiated the load that surfaces in kernel interrupt code. An example is a user process lauching a load from memory and the data in memory had bad ECC. Before the bad data gets to the CPU register, and interrupt comes in. The code jumps to the IVT interrupt entry point and begins execution in kernel context. The process of saving the user registers (SAVE_REST) causes the bad data to be loaded into a CPU register, triggering the MCA. The MCA surfaces in kernel context, even though the load was initiated from user context. As suggested by David and Tony, this patch uses an exception table like approach, puting the tagged recovery addresses in a searchable table. One difference from the exception table is that MCAs do not surface in precise places (such as with a TLB miss), so instead of tagging specific instructions, address ranges are registers. A single macro is used to do the tagging, with the input parameter being the label of the starting address and the macro being the ending address. This limits clutter in the code. This patch only tags one spot, the interrupt ivt entry. Testing showed that spot to be a "heavy hitter" with MCAs surfacing while saving user registers. Other spots can be added as needed by adding a single macro. Signed-off-by: Russ Anderson ([email protected]) Signed-off-by: Tony Luck <[email protected]> | |||||
| 2006-03-07 | [IA64] mca recovery return value when no bus check | Russ Anderson | 1 | -2/+7 | |
| When there is no bus check, the return code should be failure, not success. Signed-off-by: Russ Anderson ([email protected]) Signed-off-by: Tony Luck <[email protected]> | |||||
| 2006-03-07 | [IA64] Increase severity of MCA recovery messages | Russ Anderson | 1 | -3/+4 | |
| The MCA recovery messages are currently KERN_DEBUG, so they don't show up in /var/log/messages (by default). Increase the severity to KERN_ERR, for the initial message (and also add the physical address to this message). Leave the successful isolation message as KERN_DEBUG, but increase the severity when isolation fails to KERN_CRIT. [Russ' patch made these all KERN_CRIT] Signed-off-by: Russ Anderson ([email protected]) Signed-off-by: Tony Luck <[email protected]> | |||||
| 2006-02-09 | [IA64] mca_drv: Add minstate validation | Hidetoshi Seto | 1 | -0/+3 | |
| MCA driver can cause panic if kernel gets a state info with no minstate. This patch adds minstate validation before handling it. Signed-off-by: Hidetoshi Seto <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-11-10 | Pull mca-check-psp into release branch | Tony Luck | 1 | -4/+13 | |
| 2005-11-08 | [IA64] MCA recovery: Bump reference count on bad pages | Russ Anderson | 1 | -0/+1 | |
| When a page has a memory uncorrectable ECC error, the recovery code wants to prevent the page from being reused. This change bumps the reference count to prevent the page from getting back on the free list. Signed-off-by: Russ Anderson ([email protected]) Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-11-08 | [IA64] MCA recovery: pfn_valid() needs a pfn | Russ Anderson | 1 | -1/+1 | |
| paddr needs to be shifted by PAGE_SHIFT to be valid input for pfn_valid(). Signed-off-by: Russ Anderson <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-11-08 | [IA64] MCA recovery based on PSP bits | Russ Anderson | 1 | -4/+13 | |
| The determination of whether an MCA is recoverable or not must be based on the bits set in the PSP (Processor State Parameter). The specific bits are shown in the Intel IA-64 Architecture Software Developer's Manual, Vol 2, Table 11-6 Software Recovery Bits in Processor State Parameter. Those bits should be consistent across the entire IA-64 family of processors. Signed-off-by: Russ Anderson <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-09-22 | [IA64] MCA recovery verify pfn_valid | Hidetoshi Seto | 1 | -6/+15 | |
| Verify the pfn is valid before calling pfn_to_page(), and cut isolation message if nothing was done. Signed-off-by: Hidetoshi Seto <[email protected]> Acked-by: Russ Anderson <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-09-16 | [IA64] mca_drv cleanup | Hidetoshi Seto | 1 | -45/+69 | |
| There were some trailing white spaces, long lines, brackets in weird style etc. This patch cleans them up. Signed-off-by: Hidetoshi Seto <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-09-11 | [PATCH] MCA/INIT: use per cpu stacks | Keith Owens | 1 | -20/+17 | |
| The bulk of the change. Use per cpu MCA/INIT stacks. Change the SAL to OS state (sos) to be per process. Do all the assembler work on the MCA/INIT stacks, leaving the original stack alone. Pass per cpu state data to the C handlers for MCA and INIT, which also means changing the mca_drv interfaces slightly. Lots of verification on whether the original stack is usable before converting it to a sleeping process. Signed-off-by: Keith Owens <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-05-03 | [IA64] MCA recovery improvements | Russ Anderson | 1 | -2/+2 | |
| Jack Steiner uncovered some opportunities for improvement in the MCA recovery code. 1) Set bsp to save registers on the kernel stack. 2) Disable interrupts while in the MCA recovery code. 3) Change the way the user process is killed, to avoid a panic in schedule. Testing shows that these changes make the recovery code much more reliable with the 2.6.12 kernel. Signed-off-by: Russ Anderson <[email protected]> Signed-off-by: Tony Luck <[email protected]> | |||||
| 2005-04-16 | Linux-2.6.12-rc2 | Linus Torvalds | 1 | -0/+639 | |
| Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! | |||||