aboutsummaryrefslogtreecommitdiff
path: root/arch/csky
AgeCommit message (Collapse)AuthorFilesLines
2020-04-02csky: Enable LOCKDEP_SUPPORTGuo Ren2-0/+14
Lockdep is needed by proving the spinlocks and rwlocks. Currently, we only put trace_hardirqs_on/off with csky_irq and ret_from_exception. Signed-off-by: Guo Ren <[email protected]>
2020-04-01csky: Enable the gcov functionMa Jun1-0/+1
Support the gcov function in csky architecture. Signed-off-by: Ma Jun <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-04-01csky: Fixup get wrong psr value from phyical regGuo Ren3-1/+18
We should get psr value from regs->psr in stack, not directly get it from phyiscal register then save the vector number in tsk->trap_no. Signed-off-by: Guo Ren <[email protected]>
2020-03-31csky/ftrace: Fixup ftrace_modify_code deadlock without CPU_HAS_ICACHE_INSGuo Ren2-6/+70
If ICACHE_INS is not supported, we use IPI to sync icache on each core. But ftrace_modify_code is called from stop_machine from default implementation of arch_ftrace_update_code and stop_machine callback is irq_disabled. When you call ipi with irq_disabled, a deadlock will happen. We couldn't use icache_flush with irq_disabled, but startup make_nop is specific case and it needn't ipi other cores. Signed-off-by: Guo Ren <[email protected]>
2020-03-21csky: Remove mm.h from asm/uaccess.hSebastian Andrzej Siewior1-1/+0
The defconfig compiles without linux/mm.h. With mm.h included the include chain leands to: | CC kernel/locking/percpu-rwsem.o | In file included from include/linux/huge_mm.h:8, | from include/linux/mm.h:567, | from arch/csky/include/asm/uaccess.h:, | from include/linux/uaccess.h:11, | from include/linux/sched/task.h:11, | from include/linux/sched/signal.h:9, | from include/linux/rcuwait.h:6, | from include/linux/percpu-rwsem.h:8, | from kernel/locking/percpu-rwsem.c:6: | include/linux/fs.h:1422:29: error: array type has incomplete element type 'struct percpu_rw_semaphore' | 1422 | struct percpu_rw_semaphore rw_sem[SB_FREEZE_LEVELS]; once rcuwait.h includes linux/sched/signal.h. Remove the linux/mm.h include. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-03-08csky: Implement ftrace with regsGuo Ren6-0/+123
This patch implements FTRACE_WITH_REGS for csky, which allows a traced function's arguments (and some other registers) to be captured into a struct pt_regs, allowing these to be inspected and/or modified. Signed-off-by: Guo Ren <[email protected]>
2020-03-08csky: Add support for restartable sequenceGuo Ren3-1/+8
Copied and adapted from vincent's patch, but modified for csky. ref: https://lore.kernel.org/linux-riscv/[email protected]/raw Add calls to rseq_signal_deliver(), rseq_handle_notify_resume() and rseq_syscall() to introduce RSEQ support. 1. Call the rseq_handle_notify_resume() function on return to userspace if TIF_NOTIFY_RESUME thread flag is set. 2. Call the rseq_signal_deliver() function to fixup on the pre-signal frame when a signal is delivered on top of a restartable sequence critical section. 3. Check that system calls are not invoked from within rseq critical sections by invoking rseq_signal() from ret_from_syscall(). With CONFIG_DEBUG_RSEQ, such behavior results in termination of the process with SIGSEGV. Signed-off-by: Guo Ren <[email protected]>
2020-03-08csky: Implement ptrace regs and stack APIGuo Ren3-0/+145
Needed for kprobes support. Copied and adapted from Patrick's patch, but it has been modified for csky's pt_regs. ref: https://lore.kernel.org/linux-riscv/[email protected]/raw Signed-off-by: Guo Ren <[email protected]> Cc: Patrick Staehlin <[email protected]>
2020-03-08csky: Fixup init_fpu compile warning with __initGuo Ren3-6/+5
WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the function csky_start_secondary() to the function .init.text:init_fpu() The function csky_start_secondary() references the function __init init_fpu(). This is often because csky_start_secondary lacks a __init annotation or the annotation of init_fpu is wrong. Reported-by: Lu Chongzhi <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-23csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven1-1/+1
The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Implement copy_thread_tlsGuo Ren2-3/+5
This is required for clone3 which passes the TLS value through a struct rather than a register. Cc: Amanieu d'Antras <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Add PCI supportMaJun3-1/+39
Add the pci related code for csky arch to support basic pci virtual function, such as qemu virt-pci-9pfs. Signed-off-by: MaJun <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Minimize defconfig to support buildroot config.fragmentMa Jun1-7/+0
Some bsp (eg: buildroot) has defconfig.fragment design to add more configs into the defconfig in linux source code tree. For example, we could put different cpu configs into different defconfig.fragments, but they all use the same defconfig in Linux. Signed-off-by: Ma Jun <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Add setup_initrd check codeGuo Ren2-3/+44
We should give some necessary check for initrd just like other architectures and it seems that setup_initrd() could be a common code for all architectures. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Cleanup old Kconfig optionsKrzysztof Kozlowski2-3/+0
CONFIG_CLKSRC_OF is gone since commit bb0eb050a577 ("clocksource/drivers: Rename CLKSRC_OF to TIMER_OF"). The platform already selects TIMER_OF. CONFIG_HAVE_DMA_API_DEBUG is gone since commit 6e88628d03dd ("dma-debug: remove CONFIG_HAVE_DMA_API_DEBUG"). CONFIG_DEFAULT_DEADLINE is gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-21arch/csky: fix some Kconfig typosRandy Dunlap1-1/+1
Fix wording in help text for the CPU_HAS_LDSTEX symbol. Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Guo Ren <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Fixup compile warning for three unimplemented syscallsGuo Ren1-0/+3
Implement fstat64, fstatat64, clone3 syscalls to fixup checksyscalls.sh compile warnings. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Remove unused cache implementationGuo Ren1-15/+1
Only for coding convention, these codes are unnecessary for abiv2. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Fixup ftrace modify panicGuo Ren1-0/+2
During ftrace init, linux will replace all function prologues (call_mcout) with nops, but it need flush_dcache and invalidate_icache to make it work. So flush_cache functions couldn't be nested called by ftrace framework. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Add flush_icache_mm to defer flush icache allGuo Ren7-11/+77
Some CPUs don't support icache.va instruction to maintain the whole smp cores' icache. Using icache.all + IPI casue a lot on performace and using defer mechanism could reduce the number of calling icache _flush_all functions. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Optimize abiv2 copy_to_user_page with VM_EXECGuo Ren1-1/+3
Only when vma is for VM_EXEC, we need sync dcache & icache. eg: - gdb ptrace modify user space instruction code area. Add VM_EXEC condition to reduce unnecessary cache flush. The abiv1 cpus' cache are all VIPT, so we still need to deal with dcache aliasing problem. But there is optimized way to use cache color, just like what's done in arch/csky/abiv1/inc/abi/page.h. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860)Guo Ren2-8/+18
Instead of flushing cache per update_mmu_cache() called, we use flush_dcache_page to reduce the frequency of flashing the cache. As abiv2 cpus are all PIPT for icache & dcache, we needn't handle dcache aliasing problem. But their icache can't snoop dcache, so we still need sync_icache_dcache in update_mmu_cache(). Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Remove unnecessary flush_icache_* implementationGuo Ren3-37/+2
The abiv2 CPUs are all PIPT cache, so there is no need to implement flush_icache_page function. The function flush_icache_user_range hasn't been used, so just remove it. The function flush_cache_range is not necessary for PIPT cache when tlb mapping changed. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Support icache flush without specific instructionsGuo Ren4-8/+31
Some CPUs don't support icache specific instructions to flush icache lines in broadcast way. We use cpu control registers to flush local icache and use IPI to notify other cores. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky/Kconfig: Add Kconfig.platforms to support some driversGuo Ren2-0/+11
Such as snps,dw-apb-ictl Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky/smp: Fixup boot failed when CONFIG_SMPGuo Ren1-1/+1
If we use a non-ipi-support interrupt controller, it will cause panic here. We should let cpu up and work with CONFIG_SMP, when we use a non-ipi intc. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Set regs->usp to kernel sp, when the exception is from kernelGuo Ren3-7/+31
In the past, we didn't care about kernel sp when saving pt_reg. But in some cases, we still need pt_reg->usp to represent the kernel stack before enter exception. For cmpxhg in atomic.S, we need save and restore usp for above. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky/mm: Fixup export invalid_pte_table symbolGuo Ren1-0/+1
There is no present bit in csky pmd hardware, so we need to prepare invalid_pte_table for empty pmd entry and the functions (pmd_none & pmd_present) in pgtable.h need invalid_pte_talbe to get result. If a module use these functions, we need export the symbol for it. Signed-off-by: Guo Ren <[email protected]> Cc: Mo Qihui <[email protected]> Cc: Zhange Jian <[email protected]>
2020-02-21csky: Separate fixaddr_init from highmemGuo Ren7-66/+61
After fixaddr_init is separated from highmem, we could use tcm without highmem selected. (610 (abiv1) don't support highmem, but it could use tcm now.) Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Tightly-Coupled Memory or Sram supportGuo Ren7-1/+304
The implementation are not only used by TCM but also used by sram on SOC bus. It follow existed linux tcm software interface, so that old tcm application codes could be re-used directly. Software interface list in asm/tcm.h: - Variables/Const: __tcmdata, __tcmconst - Functions: __tcmfunc, __tcmlocalfunc - Malloc/Free: tcm_alloc, tcm_free In linux menuconfig: - Choose a TCM contain instrctions + data or separated in ITCM/DTCM. - Determine TCM_BASE (DTCM_BASE) in phyiscal address. - Determine size of TCM or ITCM(DTCM) in page counts. Here is hello tcm example from Documentation/arm/tcm.rst which could be directly used: /* Uninitialized data */ static u32 __tcmdata tcmvar; /* Initialized data */ static u32 __tcmdata tcmassigned = 0x2BADBABEU; /* Constant */ static const u32 __tcmconst tcmconst = 0xCAFEBABEU; static void __tcmlocalfunc tcm_to_tcm(void) { int i; for (i = 0; i < 100; i++) tcmvar ++; } static void __tcmfunc hello_tcm(void) { /* Some abstract code that runs in ITCM */ int i; for (i = 0; i < 100; i++) { tcmvar ++; } tcm_to_tcm(); } static void __init test_tcm(void) { u32 *tcmem; int i; hello_tcm(); printk("Hello TCM executed from ITCM RAM\n"); printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar); tcmvar = 0xDEADBEEFU; printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar); printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned); printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst); /* Allocate some TCM memory from the pool */ tcmem = tcm_alloc(20); if (tcmem) { printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem); tcmem[0] = 0xDEADBEEFU; tcmem[1] = 0x2BADBABEU; tcmem[2] = 0xCAFEBABEU; tcmem[3] = 0xDEADBEEFU; tcmem[4] = 0x2BADBABEU; for (i = 0; i < 5; i++) printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]); tcm_free(tcmem, 20); } } TODO: - Separate fixup mapping from highmem - Support abiv1 Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Initial stack protector supportMao Han3-0/+36
This is a basic -fstack-protector support without per-task canary switching. The protector will report something like when stack corruption is detected: It's tested with strcpy local array overflow in sys_kill and get: stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c TODO: - Support task switch for different cannary Signed-off-by: Mao Han <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-04Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-1/+0
Pull Microblaze update from Michal Simek: - enable CMA - add support for MB v11 - defconfig updates - minor fixes * tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add ID for Microblaze v11 microblaze: Prevent the overflow of the start microblaze: Wire CMA allocator asm-generic: Make dma-contiguous.h a mandatory include/asm header microblaze: Sync defconfig with latest Kconfig layout microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers microblaze: Align comments with register usage
2020-02-04asm-generic: Make dma-contiguous.h a mandatory include/asm headerMichal Simek1-1/+0
dma-continuguous.h is generic for all architectures except arm32 which has its own version. Similar change was done for msi.h by commit a1b39bae16a6 ("asm-generic: Make msi.h a mandatory include/asm header") Suggested-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Acked-by: Paul Walmsley <[email protected]> # for arch/riscv
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2020-01-14arch/csky/setup: Drop dummy_con initializationArvind Sankar1-4/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-12-10mm/vmalloc: Add empty <asm/vmalloc.h> headers and use them from ↵Ingo Molnar1-0/+4
<linux/vmalloc.h> In the x86 MM code we'd like to untangle various types of historic header dependency spaghetti, but for this we'd need to pass to the generic vmalloc code various vmalloc related defines that customarily come via the <asm/page.h> low level arch header. Signed-off-by: Ingo Molnar <[email protected]>
2019-12-08sched/rt, csky: Use CONFIG_PREEMPTIONThomas Gleixner1-2/+2
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code over to use CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Guo Ren <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-11-28Merge branch 'master' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-28Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremapLinus Torvalds4-60/+8
Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ...
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig1-4/+4
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <[email protected]> Suggested-by: Daniel Vetter <[email protected]>
2019-11-12csky: use generic ioremapChristoph Hellwig4-50/+8
Use the generic ioremap_prot and iounmap helpers. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Guo Ren <[email protected]>
2019-11-11csky: remove ioremap_cacheChristoph Hellwig2-9/+0
No driver that can be used on csky uses ioremap_cache, and this interface has been deprecated in favor of memremap. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Guo Ren <[email protected]>
2019-11-11arch: rely on asm-generic/io.h for default ioremap_* definitionsChristoph Hellwig1-1/+0
Various architectures that use asm-generic/io.h still defined their own default versions of ioremap_nocache, ioremap_wt and ioremap_wc that point back to plain ioremap directly or indirectly. Remove these definitions and rely on asm-generic/io.h instead. For this to work the backup ioremap_* defintions needs to be changed to purely cpp macros instea of inlines to cover for architectures like openrisc that only define ioremap after including <asm-generic/io.h>. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]>
2019-11-04vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATAKees Cook1-1/+1
Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie, since it's multiple sections and section flags cannot be applied to the macro.) Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Heiko Carstens <[email protected]> # s390 Acked-by: Geert Uytterhoeven <[email protected]> # m68k Cc: Andy Lutomirski <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Dave Hansen <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Rick Edgecombe <[email protected]> Cc: Segher Boessenkool <[email protected]> Cc: Will Deacon <[email protected]> Cc: x86-ml <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-11-04vmlinux.lds.h: Replace RO_DATA_SECTION with RO_DATAKees Cook1-1/+1
Finish renaming RO_DATA_SECTION to RO_DATA. (Calling this a "section" is a lie, since it's multiple sections and section flags cannot be applied to the macro.) Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Heiko Carstens <[email protected]> # s390 Acked-by: Geert Uytterhoeven <[email protected]> # m68k Cc: Andy Lutomirski <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Dave Hansen <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Rick Edgecombe <[email protected]> Cc: Segher Boessenkool <[email protected]> Cc: Will Deacon <[email protected]> Cc: x86-ml <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-11-04vmlinux.lds.h: Move NOTES into RO_DATAKees Cook1-1/+0
The .notes section should be non-executable read-only data. As such, move it to the RO_DATA macro instead of being per-architecture defined. Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Heiko Carstens <[email protected]> # s390 Cc: Andy Lutomirski <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Dave Hansen <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Rick Edgecombe <[email protected]> Cc: Segher Boessenkool <[email protected]> Cc: Will Deacon <[email protected]> Cc: x86-ml <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-09-30Merge tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds17-212/+291
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
2019-09-30csky: Move static keyword to the front of declarationKrzysztof Wilczynski1-1/+1
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2019-09-30csky: entry: Remove unneeded need_resched() loopValentin Schneider1-4/+0
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Guo Ren <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.