aboutsummaryrefslogtreecommitdiff
path: root/arch/csky/abiv1
AgeCommit message (Collapse)AuthorFilesLines
2019-04-22csky: Use va_pa_offset instead of phys_offsetGuo Ren1-2/+2
The name of phys_offset is so common for global export and it may conflict with some local name. So change phys_offset to va_pa_offset which also used by riscv. Also use __pa() and __va() instead of using phys_offset directly. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Support vmlinux bootup with MMU offGuo Ren1-12/+17
Modify SETUP_MMU macro to fit on both MMU-on or MMU-off enviornment and vmlinux could bootup from MMU off enviornment for some cases. Unify the style of _start and _start_smp_secondary in head.S to make head.S looks more concise and easy to understand. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Add perf_arch_fetch_caller_regs supportMao Han1-0/+1
In trace events as tracepoints context are not able to be retrieve with task_pt_regs. Without arch caller regs support the pt_regs context will be all zero, perf can not parsing the callchain and resolving the symbols correctly, some time will even get into deadlock while handling the page fault, eg: perf kmem —page record ls Changelog - Add test case cmd in comment - Use regs_fp(regs) which is defined in abi/regdef.h Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-04-22csky: Support dynamic start physical addressGuo Ren2-2/+37
Before this patch csky-linux need CONFIG_RAM_BASE to determine start physical address. Now we use phys_offset variable to replace the macro of PHYS_OFFSET and we setup phys_offset with real physical address which is determined during startup in head.S. With this patch we needn't re-compile kernel for different start physical address. ie: 0x0 / 0xc0000000 start physical address could use the same vmlinux, be care different start address must be 512MB aligned. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Reconstruct signal processingGuo Ren2-7/+2
Linux kernel has provided some apis for arch signal's implementation. For example: restore_saved_sigmask() set_current_blocked() restore_altstack() But in last version of csky signal.c didn't use them and some codes are confusing, so reconstruct signal.c with reference to riscv's code. Now csky signal.c implementation are very close to riscv and we can get the following benefits: - Clear code structure - The signal code of riscv and csky can be reviewed together - Promoting the unification of arch's signal implementation Also modified the related code in entry.S Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky: Use in_syscall & forget_syscall instead of r11_sigGuo Ren1-2/+0
We could use regs->sr 16-24 bits to detect syscall: VEC_TRAP0 and r11_sig is no necessary for current implementation. In this patch, we implement the in_syscall and forget_syscall which are inspired from arm & nds32, but csky pt_regs has no syscall_num element and we just set zero to regs->sr's vector-bits-field instead. For ret_from_fork, current task was forked from parent which is in syscall progress and its regs->sr has been already setted with VEC_TRAP0. See: arch/csky/kernel/process.c: copy_thread() Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-04-22csky: Update syscall_trace_enter/exit implementationGuo Ren1-0/+4
Previous syscall_trace implementation couldn't support AUDITSYSCALL and SYSCALL_TRACEPOINTS. Now we redesign it to support audit_syscall and syscall_tracepoints just like other archs'. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Dmitry V. Levin <ldv@altlinux.org> Cc: Arnd Bergmann <arnd@arndb.de>
2019-01-05Merge tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linuxLinus Torvalds2-0/+18
Pull arch/csky updates from Guo Ren: "Here are three main features (cpu_hotplug, basic ftrace, basic perf) and some bugfixes: Features: - Add CPU-hotplug support for SMP - Add ftrace with function trace and function graph trace - Add Perf support - Add EM_CSKY_OLD 39 - optimize kernel panic print. - remove syscall_exit_work Bugfixes: - fix abiv2 mmap(... O_SYNC) failure - fix gdb coredump error - remove vdsp implement for kernel - fix qemu failure to bootup sometimes - fix ftrace call-graph panic - fix device tree node reference leak - remove meaningless header-y - fix save hi,lo,dspcr regs in switch_stack - remove unused members in processor.h" * tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linux: csky: Add perf support for C-SKY csky: Add EM_CSKY_OLD 39 clocksource/drivers/c-sky: fixup ftrace call-graph panic csky: ftrace call graph supported. csky: basic ftrace supported csky: remove unused members in processor.h csky: optimize kernel panic print. csky: stacktrace supported. csky: CPU-hotplug supported for SMP clocksource/drivers/c-sky: fixup qemu fail to bootup sometimes. csky: fixup save hi,lo,dspcr regs in switch_stack. csky: remove syscall_exit_work csky: fixup remove vdsp implement for kernel. csky: bugfix gdb coredump error. csky: fixup abiv2 mmap(... O_SYNC) failed. csky: define syscall_get_arch() elf-em.h: add EM_CSKY csky: remove meaningless header-y csky: Don't leak device tree node reference
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds1-2/+2
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-31csky: fixup save hi,lo,dspcr regs in switch_stack.Guo Ren1-0/+17
HI, LO, DSPCR registers are 807/810 related regs and no need for 610/860. All of the regs must be saved in pt_regs and switch_stack. This patch fixup saving dspcr reg in switch_stack and pt_regs. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-31csky: fixup abiv2 mmap(... O_SYNC) failed.Guo Ren1-0/+1
Glibc function mmap(... O_SYNC) will make page to _PAGE_UNCACHE + _PAGE_SO and strong-order page couldn't support unalignment access. So remove _PAGE_SO from _PAGE_UNCACHE, also sync abiv1 with the macro of _PAGE_SO. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Liu Renwei <Renwei.Liu@verisilicon.com> Tested-by: Yuan Qiyun <qiyun_yuan@c-sky.com>
2018-10-26csky: Misc headersGuo Ren2-0/+53
This patch adds csky registers' definition, bitops, byteorder, asm-offsets codes. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-26csky: Library functionsGuo Ren6-0/+428
This patch adds string optimize codes and some auxiliary codes. Signed-off-by: Chen Linfei <linfei_chen@c-sky.com> Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-26csky: ELF and module probeGuo Ren1-0/+26
This patch adds ELF definition and module relocate codes. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-26csky: VDSO and rt_sigreturnGuo Ren1-0/+17
This patch adds files related to VDSO and our VDSO only support rt_sigreturn. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: MMU and page table managementGuo Ren4-0/+205
This patch adds files related to memory management and here is our memory-layout: Fixmap : 0xffc02000 – 0xfffff000 (4 MB - 12KB) Pkmap : 0xff800000 – 0xffc00000 (4 MB) Vmalloc : 0xf0200000 – 0xff000000 (238 MB) Lowmem : 0x80000000 – 0xc0000000 (1GB) abiv1 CPU (CK610) is VIPT cache and it doesn't support highmem. abiv2 CPUs are all PIPT cache and they could support highmem. Lowmem is directly mapped by msa0 & msa1 reg, and we needn't setup memory page table for it. Link:https://lore.kernel.org/lkml/20180518215548.GH17671@n2100.armlinux.org.uk/ Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Christoph Hellwig <hch@infradead.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: Cache and TLB routinesGuo Ren2-0/+101
This patch adds cache and tlb sync codes for abiv1 & abiv2. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: Exception handling and mm-faultGuo Ren2-0/+486
This patch adds exception handling code, cpuinfo and mm-fault code. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2018-10-25csky: Build infrastructureGuo Ren1-0/+8
This patch adds Makefile, Kconfig for build infrastructure. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Acked-by: Arnd Bergmann <arnd@arndb.de>