aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2015-12-31ARM: dts: uniphier: fix a typo in comment blockMasahiro Yamada1-1/+1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-31ARM: bcm2835: Add the auxiliary clocks to the device tree.Eric Anholt1-0/+7
These will be used for enabling UART1, SPI1, and SPI2. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-31ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 BEric Anholt3-1/+115
The Pi 2 B ends up like a Pi 1 B+, with the same peripherals and pinout, but the CPU and memory layout changed to use the 2836. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-31ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.Eric Anholt5-2/+4
For Raspberry Pi 2, we want to use the same general pin assignment bits, but need to use bcm2836.dtsi for the CPU instead. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-31ARM: bcm2835: Split the DT for peripherals from the DT for the CPUEric Anholt2-193/+206
The set of peripherals remained constant across bcm2835 (Raspberry Pi 1) and bcm2836 (Raspberry Pi 2), but the CPU was swapped out. Split the files so that we can include just peripheral setup in 2836. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-31ARM: realview: set up cache correctly on the PB11MPCoreLinus Walleij1-0/+13
The L2 cache comes up in a "safe mode" on the PB11MPCore, as it has several issues. This sets it up properly with the right size and associativity, also requiring the outer sync to be disabled for the machine to boot properly. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-31Merge tag 'davinci-for-v4.5/dts' of ↵Arnd Bergmann3-6/+68
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Merge "DaVinci device-tree updates for v4.5" from Sekhar Nori: EDMA device-tree updates including move to new EDMA bindings and EDMA support for MMC/SD and SPI. * tag 'davinci-for-v4.5/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: DTS: da850: Enable DMA for SPI1 ARM: DTS: da850: Add node for mmc1 ARM: DTS: da850: Enable DMA use for MMC0 ARM: DTS: da850: Enable eDMA1 ARM: DTS: da850: Use the new DT bindings for the eDMA3 ARM: DTS: da850: fix edma0 reg space
2015-12-31Merge tag 'omap-for-v4.5/81xx-dts-signed' of ↵Arnd Bergmann11-58/+585
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "reworked dts changes for ti81xx devices and minimal dra62x j5ec-evm support" from Tony Lindgren: Add minimal device tree support for dra62x also known j5eco. It is related to dm814x, just the clocks are a bit different and it has a different set of integrated devices. And let's get some basic dm814x and dra62x devices working as many of the devices are like on am33xx:: - pinctrl using the pinctrl defines as for am33xx - Updated EDMA bindings with support for using exma_xbar - MMC support for dm814x-evm, t410 and dra62x-j5eco-evm - USB support for dm814x-evm, t410 and dra62x-j5eco-evm This branch depends on an earlier omap-for-v4.5/81xx-fixes-signed branch that has dm814x dts fixes interlaced with SoC related fixes to keep things booting. The interlaced SoC and dts fixes were needed because of issues with the device tree defined clocks that just happened to work on bootloader timings for t410 earlier. * tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: Add usb support for j5-eco evm ARM: dts: Add usb support for hp t410 ARM: dts: Add usb support for dm814x-evm ARM: dts: Add usb support for dm814x and dra62x ARM: dts: Enable emmc on hp t410 ARM: dts: Add mmc support for dra62x j5-eco evm ARM: dts: Add mmc support for dm8148-evm ARM: dts: Add mmc device entries for dm814x ARM: dts: Update edma bindings on dm814x to use edma_xbar ARM: dts: Add pinctrl macros for dm814x ARM: dts: Add minimal dra62x j5-eco evm support ARM: dts: Add basic support for dra62x j5-eco SoC ARM: OMAP2+: Remove useless check for legacy booting for dm814x ARM: OMAP2+: Enable GPIO for dm814x ARM: dts: Fix dm814x pinctrl address and mask ARM: dts: Fix dm8148 control modules ranges ARM: OMAP2+: Fix timer entries for dm814x ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting ARM: OMAP2+: Add DPPLS clock manager for dm814x clk: ti: Add few dm814x clock aliases ...
2015-12-24ARM: DTS: da850: Enable DMA for SPI1Peter Ujfalusi1-0/+2
Add the needed bindings so the SPI driver can use DMA with SPI1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Add node for mmc1Peter Ujfalusi1-0/+8
da850 has two MMC controller, MMCSD1 is served by eDMA1 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Enable DMA use for MMC0Peter Ujfalusi1-0/+2
Add the needed bindings for MMC0 in order to be able to utilize the DMA instead of PIO mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Enable eDMA1Peter Ujfalusi3-0/+25
The eDMA1 in da850 has only one TPTC and for example MMC1 is HW events are handled by it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: Use the new DT bindings for the eDMA3Peter Ujfalusi3-5/+29
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-24ARM: DTS: da850: fix edma0 reg spacePeter Ujfalusi1-1/+2
The size of the eDMA0 CC register space is 0x8000 and not 0x10000. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-22ARM: dts: Add usb support for j5-eco evmTony Lindgren1-0/+21
Add usb support for j5-eco evm. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add usb support for hp t410Tony Lindgren1-0/+35
Add usb support for hp t410 and a fixed regulator for the hub power. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add usb support for dm814x-evmTony Lindgren1-0/+24
Add usb support for dm814x-evm Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add usb support for dm814x and dra62xTony Lindgren1-0/+125
The usb is very much like on am33xx, we just put the some of the componends under scm where they belong. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Enable emmc on hp t410Tony Lindgren1-0/+35
There's a 2GB emmc on hp t410 that's wired to the sd_2 interface. Note that we also need to configure the evtmux using edma_xbar for edma channels. Let's use the McASP2 channels like the original kernel seems to be doing, most likely the audio on t410 is different from dm814x-evm. Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add mmc support for dra62x j5-eco evmTony Lindgren1-0/+31
There's mmc interface on j5-eco evm that's wired to the sd_1 interface. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add mmc support for dm8148-evmTony Lindgren1-0/+31
There is a mmc slot on the dm8148-evm that's wired to the sd_1 interface. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add mmc device entries for dm814xTony Lindgren1-0/+31
Add mmc device entries for dm814x. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Update edma bindings on dm814x to use edma_xbarTony Lindgren1-10/+58
The edma is the same as on am33xx, except it has four tptc instances. And we need the edma_xbar for at least mmc3, so let's use the edma_xbar and the new binding as suggested by Peter Ujfalusi <peter.ujfalusi@ti.com>. Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated for ti,edma-memcpy-channels binding] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add pinctrl macros for dm814xTony Lindgren1-1/+1
Let's add the DM814X_IOPAD macro the same way as we have for dm816x and am33xx as this allows comparing the registers with the documentation easily. The pinctrl bits are yet again different on dm814x. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add minimal dra62x j5-eco evm supportTony Lindgren2-1/+30
This allows us to boot dra62x j5-eco evm with NFSroot. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: Add basic support for dra62x j5-eco SoCTony Lindgren2-0/+46
The dra762x j5-eco is similar to dm814x with a bit different clocks and devices. [tony@atomide.com: updated to leave out adpll clock driver references] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22ARM: dts: tango4: Initial device treesMarc Gonzalez4-0/+200
This device tree was tested on a Sigma Designs SMP8758 Vantage-1172 Rev E1 development board. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'sunxi-dt-for-4.5-2' of ↵Olof Johansson9-1/+356
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT patches, round 2 Mostly some audio codec patches to enable it on more boards, and a bunch devices activation (Ethernet, touchscreen, backlights). One more board has been added too. * tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT ARM: dt: sun7i: Enable audio codec on MK808C ARM: sunxi: dt: enable audio codec on mk802 ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'at91-4.5-dt2' of ↵Olof Johansson4-1/+298
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Second batch of DT changes for 4.5: - addition of sound nodes for sama5d2 and the xplained - addition of a new patform by Landis+Gyr: VInCo * tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91/dt: sama5d2 Xplained: add pdmic node ARM: at91/dt: sama5d2: add pdmic node ARM: at91/dt: Add Support for the L+G VInCo platform Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'imx-dt-4.5' of ↵Olof Johansson33-43/+1984
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt The i.MX device tree updates for 4.5: - New boards support: imx51-ts4800, imx6q-novena, CompuLab imx7d SoM/SBC, vf610m4-cosmic - Add ADC device support for imx6ul and imx7d - Remove config space from PCIe controller ranges property for i.MX6 - Add Vivante GPU nodes for i.MX6 - Add DCU, LCD, and SATA devices for LS1021A - A series to update Ventana gw5xxx boards getting HDMI and LVDS to work simultaneously and devices like PWM and SPI added - Quite a few random cleanups and minor updates * tag 'imx-dt-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) ARM: dts: imx7d: sbc-imx7: add basic board support ARM: dts: imx7d: cl-som-imx7: add basic module support ARM: dts: TS-4800: add touchscreen support ARM: dts: ts-4800: Add LCD support ARM: dts: imx6q: add Novena board devicetree: bindings: Add vendor prefix for Kosagi ARM: dts: TS-4800: use weim IP to map the FPGA ARM: dts: TS-4800: drop uart rts/cts pin reservations ARM: dts: imx6: add Vivante GPU nodes ARM: dts: imx28: add alternate auart4 pinmux ARM: dts: ls1021a: add sata node to dts ARM: dts: TS-4800: add basic device tree of: documentation: add bindings documentation for TS-4800 of: add vendor prefix for Technologic Systems ARM: dts: imx7d-sdb: add ADC support ARM: dts: imx7d.dtsi: add ADC support ARM: dts: vf-colibri: add CAN support ARM: mxs: dt: cfa10057: fix backlight PWM ARM: dts: imx6qdl: move GIC to right location in DT ARM: dts: imx6qdl: add IPU aliases ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'omap-for-v4.5/dt-pt2' of ↵Olof Johansson35-148/+626
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of omap device tree changes for v4.5 merge window. This series updates the EDMA bindings based on the various fixes to split EDMA into separate independent devices. It also adds support for more devices on the CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings for qspi for am437x and dra7. There are also few dra7 regulator fixes, and change of gpoi-key,wakeup to wakeup-source. These depend on commit ae0add740cd0 ("dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type") already merged into mainline. * tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9 ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2 ARM: dts: AM4372: add entry for qspi mmap region ARM: dts: DRA7: add entry for qspi mmap region ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support ARM: dts: cm-t335: add support for bluetooth ARM: dts: cm-t335: add support for DVI/LCD ARM: dts: cm-t335: add support for I2C GPIO expander ARM: dts: cm-t335: add support for SBC-T335 ARM: dts: cm-t335: add support for USB0 ARM: dts: omap: replace legacy *,wakeup property with wakeup-source ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property ARM: DTS: am437x: Use the new DT bindings for the eDMA3 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'socfpga_dts_for_v4.5_part_2' of ↵Olof Johansson7-54/+60
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS update for v4.5, part 2 - clean up mcvevk dts file, replace space with tab - Disable SDMMC node in base socfpga.dtsi file * tag 'socfpga_dts_for_v4.5_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: Enable MMC support at correct place in the DT ARM: socfpga: Repair incorrectly applied MCV patch Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'v4.5-rockchip-dts32-2' of ↵Olof Johansson11-59/+1006
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Another new soc - the rk3228 quad-core cortex-a7, a new rk3036 board, support for the efuses on Rockchip socs and some improvements for rk3288 regulators. * tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add the kylin board for rk3036 ARM: dts: rockchip: add the sdio/sdmmc node for rk3036 ARM: dts: rockchip: fix the pinctrl bias settings for rk3036 ARM: dts: rockchip: add eFuse node for rk3188 SoCs ARM: dts: rockchip: add eFuse node for rk3066a SoCs ARM: dts: rockchip: add eFuse config of rk3288 SoC ARM: dts: rockchip: add rk3228-evb board ARM: dts: rockchip: add core rk3228 dtsi clk: rockchip: Add the clock ids of rk3288 eFuses ARM: dts: rockchip: Fix typo in rk3288 sdmmc card detect pin name ARM: dts: rockchip: fix voltage ranges for rk3288-evb-act8846 board ARM: dts: rockchip: move the public part to rk3288-evb common ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846 ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846 clk: rockchip: add dt-binding header for rk3228 clk: rockchip: add id for mipidsi sclk on rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc ↵Olof Johansson4-0/+54
into next/dt Device Tree additions for LPC18xx platform NXP LPC18xx EEPROM support plus board updates for CIAA board and EA4357 Dev kit. * tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc: ARM: dts: lpc4337-ciaa: add i2c0 and devices ARM: dts: lpc4337-ciaa: enable SCT-PWM ARM: dts: lpc4357-ea4357: add mma7455 i2c accelerometer ARM: dts: lpc4357: enable EEPROM memory ARM: dts: lpc18xx: add EEPROM memory node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtOlof Johansson5-1/+178
Add regulators to the scpsys binding. Move the include of the reset contoller to include/dt-bindings/reset. Add basic support for mt2701 SoC and evaluation board. * tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek: dt-bindings: soc: Add supplies for Mediatek SCPSYS unit ARM: mediatek: DT: Move reset controller constants into common location ARM: dts: mediatek: add MT2701 basic support Document: DT: Add bindings for mediatek MT2701 SoC Platform Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson8-3/+445
mvebu dt for 4.5 (part 3) Add dts for the following boards: - Zyxel NSA325 - PogoPlug series 4 Add GPU support for Dove Update boolean property to wakeup source for isil * tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu: ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property ARM: dts: enable GPU for SolidRun's Cubox ARM: dts: dove: add DT GPU support ARM: mvebu: kirkwood: add PogoPlug series 4 device tree ARM: mvebu: add kirkwood compatibles for cloudengine boards ARM: dts: kirkwood: Add DTS for Zyxel NSA325 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'renesas-dt3-for-v4.5' of ↵Olof Johansson14-59/+357
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Third Round of Renesas ARM Based SoC DT Updates for v4.5 * Use SoC-specific usb-dmac and IPMMU compatibility strings * Add internal delay for i2c IPs * Add missing serial devices to r8a7793 * Enable DMA for r8a7793 serial devices * Add serial port config to chosen/stdout-path * Tidyup #sound-dai-cells settings for r8a7798/bockw * Remove deprecated #gpio-range-cells from r8a7793 * Add EtherAVB support to r8a7791 * Add MSIOF support to sh73a0 * tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits) ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings ARM: shmobile: r8a7794: IPMMU compat string SoC part number update ARM: shmobile: r8a7793: IPMMU compat string SoC part number update ARM: shmobile: r8a7791: IPMMU compat string SoC part number update ARM: shmobile: r8a7790: IPMMU compat string SoC part number update ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7793: Describe DMA for the serial ports ARM: shmobile: r8a7793: Add missing serial devices to DT ARM: shmobile: lager dts: Add serial port config to chosen/stdout-path ARM: shmobile: porter dts: Add serial port config to chosen/stdout-path ARM: shmobile: silk dts: Add serial port config to chosen/stdout-path ARM: shmobile: gose dts: Add serial port config to chosen/stdout-path ARM: shmobile: bockw dts: Update console parameters ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-path ARM: shmobile: alt dts: Add serial port config to chosen/stdout-path ARM: shmobile: koelsch dts: Add serial port config to chosen/stdout-path ARM: shmobile: r8a7778: tidyup #sound-dai-cells settings ARM: shmobile: bockw dts: Override #sound-dai-cells to zero ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'qcom-dt-for-4.5' of ↵Olof Johansson15-46/+1132
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM Based Device Tree Updates for v4.5 * Add support for Sony Xperia Z * Updates for Sony Honami board * Updates for APQ8064 generic platform * Updates for MSM8974 generic platform * Add fixed rate oscillators for MSM8960 and APQ8064 * Add documentation for SMSM and SMP2P * Fixup PMIC compat strings * Add support for SMEM, RPM/SMD on APQ8084 * Fixup compat on IFC5640 * tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits) arm: dts: Add support for PMA8084 on APQ8084 arm: dts: Add RPM/SMD support on APQ8084 arm: dts: Add APQ8084 SMEM nodes ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6 arm: dts: qcom: apq8064: Add fixed rate on-board oscillators ARM: dts: qcom: msm8974: Add i2c8 node ARM: dts: qcom: msm8974: Disable wled and move it to honami arm: dts: qcom: Add generic PMIC gpio/MPP compat strings arm: dts: qcom: Add aliases for PMICs arm: dts: qcom: Update ifc6540 compat for qcom boot format arm: dts: qcom: Add board clocks ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node ARM: dts: qcom: apq8064: Declare all pm8921 regulators ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation devicetree: Add hardware rng entry to qcom-apq8064.dtsi ARM: dts: qcom: msm8974-honami: Specify charging parameters ARM: dts: qcom: msm8974-honami: Add uSD slot nodes ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'at91-dt' of ↵Olof Johansson6-9/+327
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt First batch of DT changes for 4.5: - addition of nodes for sama5d2 & sama5d4 - some fixes for i2c hold time, compatible stings - addition of a new patform by DENX: the MA5D4 SoM and EVK * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time ARM: at91/dt: sama5d4: update i2c compatible string ARM: at91/dt: sama5d4 master clock can run at 200MHz now ARM: at91/dt: sama5d2: add watchdog node ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'sunxi-dt-for-4.5' of ↵Olof Johansson23-25/+1536
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.5 Allwinner device-tree related patches for the 4.5 merge window. * Support for the H3 * Addition of the RSB to the relevant devices (sun8i, sun9i) * Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i) * Addition of the DRAM gates for the older SoCs (sun4i, sun7i) * Addition of the audio codec to a bunch of boards * New board: ICNova SWAC * tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (40 commits) ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket) ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver ARM: dts: sun9i: cubieboard4: Enable LEDs ARM: dts: sun7i: Add VE (Video Engine) module clock node ARM: dts: sun4i: Add VE (Video Engine) module clock node ARM: dts: sun8i: Add Orange Pi Plus support ARM: dts: sunxi: Add Allwinner H3 DTSI ARM: dts: sun7i: Add DRAM gates ARM: dts: sun4i: Add DRAM gates ARM: dts: sun9i: Add NMI controller device node ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi ARM: dts: sun9i: optimus: Enable consumer IR receiver ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings ARM: dts: sun9i: optimus: Enable LED3 ARM: dts: sun9i: Add A80 R_PIO pin controller device node ARM: dts: sun9i: Add TODO comments for the main and low power clocks ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx into next/dtOlof Johansson2-5/+7
arm: Xilinx Zynq dt patches for v4.5 - Various small DT changes, GPIO, slcr, cpu label * tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx: ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs. ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property ARM: zynq: DT: Add interrupt-controller property to GPIO Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22ARM: dts: imx7d: sbc-imx7: add basic board supportIlya Ledvich2-0/+43
SBC-iMX7 is a single board computer designed for industrial and embedded applications. It is based on the Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with the CL-SOM-iMX7 System-on-Module providing most of the functions, and SB-SOM-iMX7 carrier board providing additional peripheral functions and connectors. http://www.compulab.co.il/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/ http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic board support, including SD card as a secondary boot and storage device Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-12-22ARM: dts: imx7d: cl-som-imx7: add basic module supportIlya Ledvich2-0/+287
CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on Freescale i.MX7 System-on-Chip family. http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * eMMC * 2x Gigabit Ethernet ports (FEC1 and FEC2) * I2C2 bus * EEPROM * PCA9555 GPIO extender * PMIC * UART1 * USB OTG port Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-12-22ARM: dts: TS-4800: add touchscreen supportDamien Riegel1-0/+6
This commit enables the touchscreen on TS-4800, using the ts4800-ts driver. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: ts-4800: Add LCD supportDamien Riegel1-0/+102
This commit adds LCD support for the TS-4800. The panel is an Okaya RS800480T-7X0WQ and the timings have been extracted from Technologic Systems' tree. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6q: add Novena boardSean Cross2-0/+786
Novena is an open-hardware laptop/desktop/bare board. See http://www.kosagi.com/w/index.php?title=Novena_Main_Page Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: TS-4800: use weim IP to map the FPGADamien Riegel1-21/+39
Previously, the device tree mapped the FPGA like any other IPs inside the SoC, but it is actually mapped through the WEIM (Wireless External Interface Module). This patch updates the device tree to make use of it. About the timings: in the image provided by the manufacturer, only CS0GCR1 is changed. The other values are the default ones, but the WEIM bindings expect them to be all explicitly set in the device tree, so I just put the default values in the dt. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: TS-4800: drop uart rts/cts pin reservationsDamien Riegel1-4/+0
These pins are actually not routed for UARTs, they should not be reserved. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6: add Vivante GPU nodesLucas Stach3-0/+41
This adds the device nodes for 2D, 3D and VG GPU cores. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx28: add alternate auart4 pinmuxMans Rullgard1-0/+11
Add auart4 2-pin configuration on auart0 rts/cts pads. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.