aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-11-05ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2Łukasz Stelmach1-0/+26
Add Ethernet interface description for Odroid X/X2. Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-05ARM: dts: exynos: Add Ethernet interface description for Odroid U3Łukasz Stelmach1-0/+12
Add Ethernet interface description for Odroid U3. Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-05ARM: dts: exynos: Add Ethernet interface description for Odroid XUŁukasz Stelmach1-0/+15
Add Ethernet interface description for Odroid XU. Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-05ARM: dts: exynos: Add Ethernet interface description for Odroid XU3 LiteŁukasz Stelmach1-0/+22
Add Ethernet interface description for Odroid XU3 Lite. Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-05ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boardsMarek Szyprowski3-1/+18
MicroUSB port on OdroidU3+ boards can operate both as peripheral or as host port. Till now it was configured as pheriperal only port, but it turned out that the DWC2 driver code already handles everything needed to support USB role-switch, so switch it to dual-role (OTG) mode. This has no effect on OdroidU3 (without 'plus') and OdroidX2, which doesn't have USB needed ID pin and VBUS wiring. Those will still operate correctly in pheriperal mode only. Signed-off-by: Marek Szyprowski <[email protected]> Tested-by: Anand Moon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-04USB: serial: keyspan_pda: clean up xircom/entrega supportJohan Hovold4-4/+0
Drop the separate Kconfig symbol for Xircom / Entrega and always include support in the keyspan_pda driver. Note that all configs that enabled CONFIG_USB_SERIAL_XIRCOM also enable CONFIG_USB_SERIAL_KEYSPAN_PDA. Acked-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservationsArd Biesheuvel1-2/+2
free_highpages() iterates over the free memblock regions in high memory, and marks each page as available for the memory management system. Until commit cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") it rounded beginning of each region upwards and end of each region downwards. However, after that commit free_highmem() rounds the beginning and end of each region downwards, and we may end up freeing a page that is memblock_reserve()d, resulting in memory corruption. Restore the original rounding of the region boundaries to avoid freeing reserved pages. Fixes: cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]> Co-developed-by: Mike Rapoport <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Acked-by: Max Filippov <[email protected]>
2020-11-03ARM: dts: imx50-kobo-aura: Add 'grp' suffix to pinctrl node namesJonathan Neuschäfer1-12/+12
i.MX pinctrl group nodes should have names that ends with 'grp'. Reported-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Jonathan Neuschäfer <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-03ARM: dts: imx: add usb aliasPeng Fan7-0/+22
Add usb alias for bootloader searching the controller in correct order. Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-02ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet nodePablo Greco1-1/+1
Ethernet PHY on BananaPi M2 Berry provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller") Signed-off-by: Pablo Greco <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulatorPablo Greco1-5/+5
DCDC1 regulator powers many different subsystems. While some of them can work at 3.0 V, some of them can not. For example, VCC-HDMI can only work between 3.24 V and 3.36 V. According to OS images provided by the board manufacturer this regulator should be set to 3.3 V. Set DCDC1 and DCDC1SW to 3.3 V in order to fix this. Fixes: 23edc168bd98 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Berry") Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller") Signed-off-by: Pablo Greco <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHYPablo Greco1-1/+1
The Ethernet PHY on the Bananapi M1 has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board") Signed-off-by: Pablo Greco <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02arm: dts: sunxi: h3/h5: Add I2S2 nodeMarcus Cooper1-0/+13
Add H3/H5 I2S2 node connected to the HDMI interface. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Marcus Cooper <[email protected]> Signed-off-by: Clément Péron <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionalityKonstantin Aladyshev1-0/+22
Enable the USB 2.0 Virtual Hub Controller and the Video Engine with it's reserved memory region for the implementation of the iKVM functionality in the BMC. Signed-off-by: Konstantin Aladyshev <[email protected]> Reviewed-by: Supreeth Venkatesh <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-02ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3Konstantin Aladyshev1-0/+5
The KCS interface on the LPC channel 3 in the controller is used for the in-band BMC<->BIOS IPMI communication. 0xCA2 is a default host CPU LPC IO address for this interface. Signed-off-by: Konstantin Aladyshev <[email protected]> Reviewed-by: Supreeth Venkatesh <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-02ARM: dts: sun8i-v3s: Add I2C1 PB pins descriptionPaul Kocialkowski1-0/+6
I2C1 can be exposed through PB pins in addition to PE pins on the V3s. Add the device-tree description for these pins. Signed-off-by: Paul Kocialkowski <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02ARM: dts: s3: pinecube: align compatible property to other S3 boardsMatteo Scordino1-1/+1
The compatible string in the Pine64 Pinecube dts diverges from the ones used in other S3 based boards, like the LicheePi and the Elimo Impetus and Initium. Discussion on LKML decided the PineCube should align to the others. Signed-off-by: Matteo Scordino <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsiMatteo Scordino1-0/+5
The Allwinner V3 and S3 can use PG6/7 as RX/TX for UART1. Since no other functions are assigned to those pins, they are a convenient choice for a debugging or application UART. This is specific to V3/S3 as the V3s's non-BGA package did not have those pins. Signed-off-by: Matteo Scordino <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02ARM: sunxi: Add machine match for the Allwinner V3 SoCPaul Kocialkowski1-0/+1
The Allwinner V3 SoC shares the same base as the V3s but comes with extra pins and features available. As a result, it has its dedicated compatible string (already used in device trees), which is added here. Signed-off-by: Paul Kocialkowski <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-02ARM: dts: aspeed: tiogapass: Remove vuartVijay Khemka1-5/+0
Removed vuart for facebook tiogapass platform as it uses uart2 and uart3 pin with aspeed uart routing feature. Signed-off-by: Vijay Khemka <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Fixes: ffdbf494821d ("ARM: dts: aspeed: tiogapass: Enable VUART") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-02ARM: dts: imx6q-prti6q: fix PHY addressOleksij Rempel1-2/+2
Due to bug in the bootloader, the PHY has floating address and may randomly change on each PHY reset. To avoid it, the updated bootloader with the following patch[0] should be used: | ARM: protonic: disable on-die termination to fix PHY bootstrapping | | If on-die termination is enabled, the RXC pin of iMX6 will be pulled | high. Since we already have an 10K pull-down on board, the RXC level on | PHY reset will be ~800mV, which is mostly interpreted as 1. On some | reboots we get 0 instead and kernel can't detect the PHY properly. | | Since the default 0x020e07ac value is 0, it is sufficient to remove this | entry from the affected imxcfg files. | | Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from | 4 to 0. With latest bootloader update, the PHY address will be fixed to "0". [0] https://git.pengutronix.de/cgit/barebox/commit/?id=93f7dcf631edfcda19e7757b28d66017ea274b81 Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board") Signed-off-by: Oleksij Rempel <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-02ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clockingAndrew Lunn1-0/+3
The ZII devel B board has two generations of Marvell Switches. The mv88e6352 supports an MDIO clock of 12MHz. However the older 88e6185 does not like 12MHz, and often fails to probe. Reduce the clock speed to 5MHz, which seems to work reliably. Cc: Chris Healy <[email protected]> Fixes: b955387667ec ("ARM: dts: ZII: update MDIO speed and preamble") Signed-off-by: Andrew Lunn <[email protected]> Reviewed-by: Chris Healy <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-02arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phySergey Matyukevich1-1/+1
Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") fixed micrel phy driver adding proper support for phy modes. Adapt imx6q-udoo board phy settings : explicitly set required delay configuration using "rgmii-id". Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo") Signed-off-by: Sergey Matyukevich <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-01ARM: dts: rockchip: Remove 0 point from brightness-levels on rk3288-veyronAlexandru Stan3-3/+3
The extra 0 only adds one point in the userspace visible range, so this change is almost a noop with the current driver behavior. We don't need the 0% point, userspace seems to handle this just fine because it uses the bl_power property to turn off the display. Furthermore after adding "backlight: pwm_bl: Fix interpolation" patch, the backlight interpolation will work a little differently. So we need to preemptively remove the 0-3 segment since otherwise we would have a 252 long interpolation that would slowly go between 0 and 3, looking really bad in userspace. So it's almost a noop/cleanup now, but it will be required in the future. Signed-off-by: Alexandru Stan <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Acked-by: Daniel Thompson <[email protected]> Link: https://lore.kernel.org/r/20201021220404.v3.1.I96b8d872ec51171f19274e43e96cadc092881271@changeid Signed-off-by: Heiko Stuebner <[email protected]>
2020-10-31ARM: exynos: clear prefetch bits in default l2c_aux_valGuillaume Tucker1-2/+2
Clear the L310_AUX_CTRL_DATA_PREFETCH and L310_AUX_CTRL_INSTR_PREFETCH bits in the l2c_aux_val defaults for Exynos since they can now be set using the standard l2c2x0 devicetree bindings. Signed-off-by: Guillaume Tucker <[email protected]> Link: https://lore.kernel.org/r/e44b5226f3ad1551459830c678ed183762d8e458.1597061474.git.guillaume.tucker@collabora.com Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-31ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driverOleksij Rempel4-8/+8
After this patch we need 2 arguments less for the fsl,stop-mode property: | commit d9b081e3fc4bdc33e672dcb7bb256394909432fc | Author: Marc Kleine-Budde <[email protected]> | Date: Sun Jun 14 21:09:20 2020 +0200 | | can: flexcan: remove ack_grp and ack_bit handling from driver | | Since commit: | | 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment | | the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode | acknowledge and not the acknowledgment on chip level. | | This means the 4th and 5th value of the property "fsl,stop-mode" isn't used | anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver. This patch removes the two last arguments, as they are not needed anymore. Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Joakim Zhang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-30timekeeping: default GENERIC_CLOCKEVENTS to enabledArnd Bergmann1-12/+0
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to require each one to select that symbol manually. Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as a simplification. It should be possible to select both GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now and decide at runtime between the two. For the clockevents arch-support.txt file, this means that additional architectures are marked as TODO when they have at least one machine that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when at least one machine has been converted. This means that both m68k and arm (for riscpc) revert to TODO. At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS rather than leaving it off when not needed. I built an m68k defconfig kernel (using gcc-10.1.0) and found that this would add around 5.5KB in kernel image size: text data bss dec hex filename 3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent 3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent On Arm (MACH_RPC), that difference appears to be twice as large, around 11KB on top of an 6MB vmlinux. Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-30ARM: rpc: use legacy_timer_tickArnd Bergmann4-17/+2
rpc is the only user of the timer_tick() function now, and can just call the newly added generic version instead. Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-30ARM: remove ebsa110 platformArnd Bergmann17-1220/+6
Russell said that he is no longer using this machine, and it seems that nobody else has in a long time, so it's time to say goodbye to it. As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET, there are some follow-up patches to remove that as well. Acked-by: Russell King <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-30Merge tag 'arm-soc-fixes-v5.10-1' of ↵Linus Torvalds10-9/+42
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a fairly large set of bug fixes on top of -rc1, as most of them were ready but didn't quite make it into the last-minute pull requests for the merge window. Allwinner: - fix for incorrect CPU overtemperature limit Amlogic: - multiple smaller DT bugfixes, and missing device nodes Marvell EBU: - add missing aliases for ethernet switch ports on espressobin board Marvell MMP: - DTC warning fix - bugfix for camera interface power-down NXP i.MX: - re-enable the GPIO driver on all defconfigs ST STM32MP1: - fix random crashes from incorrect voltage settings Synaptics Berlin: - enable the correct hardware timer driver Texas Instruments K2G: - fix a boot regression in the power domain code TEE drivers: - fix regression in TEE "login" method SCMI drivers: - multiple code fixes for corner cases in newly added code MAINTAINERS file: - move Kukjin Kim and Sangbeom Kim to credits (used to work on Samsung Exynos) - Masahiro Yamada is stepping down as Uniphier maintainer I did not include a series of patches that work around a regression caused by a bugfix in an ethernet phy driver that resulted in an inadvertent DT binding change. This is still under discussion" * tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: ti: ti_sci_pm_domains: check for proper args count in xlate ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios" ARM: dts: mmp3: Add power domain for the camera arm64: berlin: Select DW_APB_TIMER_OF dt-bindings: sram: sunxi-sram: add V3s compatible string MAINTAINERS: Move Sangbeom Kim to credits MAINTAINERS: Move Kukjin Kim to credits MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default arm64: defconfig: Build in CONFIG_GPIO_MXC by default arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: amlogic: add missing ethernet reset ID firmware: arm_scmi: Fix duplicate workqueue name firmware: arm_scmi: Fix locking in notifications ...
2020-10-30ARM: dts: imx: Fix schema warnings for pwm-ledsAlexander Dahl3-13/+14
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. DTC arch/arm/boot/dts/imx53-ppd.dt.yaml CHECK arch/arm/boot/dts/imx53-ppd.dt.yaml arch/arm/boot/dts/imx53-ppd.dt.yaml: leds-brightness: 'alarm-brightness' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml CHECK arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml CHECK arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml CHECK arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml CHECK arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml: pwmleds: 'blue', 'green', 'red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml Signed-off-by: Alexander Dahl <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-30ARM: dts: imx7s-warp: correct vendor in compatible to Element14Krzysztof Kozlowski1-2/+2
The WaRP7 board (Wearable Development Platform) was apparently made by Element14, not by "Warp". Correct the vendor in compatible to reflect this. The compatibles were not documented in the bindings before. Link: https://www.element14.com/community/docs/DOC-79058 Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-30ARM: dts: imx6sl-warp: correct vendor in compatible to RevoticsKrzysztof Kozlowski1-2/+2
The WaRP board (Wearable Development Platform) was apparently made by Revolution Robotics, Inc (brand: Revotics), not by "Warp". Correct the vendor in compatible to reflect this. The compatibles were not documented in the bindings before. Link: https://revotics.com/warp Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-30ARM: dts: imx6dl: add compatibles for Aristainetos boardsKrzysztof Kozlowski4-4/+4
The Aristainetos and Aristainetos2 boards have only SoC compatible. Cc: Heiko Schocher <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Heiko Schocher <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-30ARM: dts: imx6dl-pico: fix board compatiblesKrzysztof Kozlowski4-4/+4
There are four flavors of TechNexion PICO-IMX6 boards. They have their own DTSes, even though in Dwarf, Nymph and Pi are exactly the same. They also have their own bindings so adjust the compatibles to match the bindings. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-30ARM: imx: Add revision support for i.MX7ULP revision 2.2Anson Huang1-0/+3
On i.MX7ULP revision 2.2, the value is 3, so add support for this revision, otherwise, it will use default revision of 1.0 which is incorrect. Signed-off-by: Anson Huang <[email protected]> Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-29ARM: dts: vf: align watchdog node name with dtschemaKrzysztof Kozlowski1-1/+1
The dtschema expects watchdog device node name to be "watchdog": arch/arm/boot/dts/vf500-colibri-eval-v3.dt.yaml: wdog@4003e000: $nodename:0: 'wdog@4003e000' does not match '^watchdog(@.*|-[0-9a-f])?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-29ARM: dts: imx: align watchdog node name with dtschemaKrzysztof Kozlowski7-9/+10
The dtschema expects watchdog device node name to be "watchdog": arch/arm/boot/dts/imx31-bug.dt.yaml: wdog@53fdc000: $nodename:0: 'wdog@53fdc000' does not match '^watchdog(@.*|-[0-9a-f])?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-29ARM: configs: at91_dt: resync with media changesEugen Hristev1-0/+5
The media tree Kconfig has changed recently, and a lot of modules were built unintentionally, like the dvb frontends and encoders. Resync the defconfig to build the ISI drivers and tested sensors. Signed-off-by: Eugen Hristev <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: s5pv210: adjust node names to DT specKrzysztof Kozlowski4-25/+25
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Exynos542x boardsKrzysztof Kozlowski8-16/+16
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Odroid XUKrzysztof Kozlowski1-1/+1
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boardsKrzysztof Kozlowski6-10/+10
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: remove redundant status=okay in Exynos4412 boardsKrzysztof Kozlowski2-4/+0
New nodes are enabled by default, so status=okay is not needed for them. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boardsKrzysztof Kozlowski9-37/+37
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid familyKrzysztof Kozlowski2-13/+13
Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Exynos4210 boardsKrzysztof Kozlowski4-18/+18
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Exynos3250 boardsKrzysztof Kozlowski3-9/+9
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: dts: at91: at91-sama5d27_som1: fix EEPROM compatibleBartosz Golaszewski1-1/+1
AT24 compatibles require a vendor prefix. Use the default "atmel". Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-28ARM: configs: at91: sama5: resync with media changesEugen Hristev1-0/+9
The media tree Kconfig has changed recently, and a lot of modules were built unintentionally, like the dvb frontends and encoders. Resync the defconfig to build the sama5 drivers and tested sensors. Signed-off-by: Eugen Hristev <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.