aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-11-23Merge tag 'ux500-dts-for-v5.11-1' of ↵Arnd Bergmann8-16/+29
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS updates for the v5.11 kernels: - Rename the DSI controllers to match the preferred schema. - Pull down the SDI2 feedback clock on the Skomer. - Add proper supplies to the MaxToch touchscreen on the Golden. * tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500-golden: Add proper supplies to touchscreen ARM: dts: ux500: skomer: Pull down SDI2 FBCLK ARM: dts: ux500: Rename DSI controller nodes Link: https://lore.kernel.org/r/CACRpkdY_M4xj++QhRPqX6N3x9YmFNJkz70DnvBj7Ai-dOtCJSQ@mail.gmail.com Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-23ARM: dts: add Nuvoton NPCM730 device treeTomer Maimon1-0/+44
Add Nuvoton NPCM730 SoC device tree. The Nuvoton NPCN730 SoC is a part of the Nuvoton NPCM7xx SoCs family. Signed-off-by: Tomer Maimon <[email protected]> Reviewed-by: Benjamin Fair <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-23Merge tag 'samsung-dt-5.11' of ↵Arnd Bergmann52-265/+526
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.11 1. Many cleanups of DTS and alignments to dtschema. Most of them do not have any functional effect except passing dtschema checks or dtc W=2 builds. 2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two ports, missing supply to the USB over-current and VBUS control pins and finally missing pin configuration for these pins. 3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of using interrupts. 4. Correct the usage of "opp-shared" properties which lead to disabling the bus frequency and voltage scaling. 5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards. 6. Enable dual-role USB on Odroid U3+ board. 7. Add Ethernet description in multiple Odroid DTS allowing also easy MAC address filling by bootloader. 8. Add Ethernet to Artik 5 (Exynos3250) board. 9. Add interconnect properties to Exynos4412 to fix old Mixer issues. * tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits) ARM: dts: exynos: use hyphens in MFC reserved memory node names ARM: dts: exynos: use hyphens in Exynos5 node names ARM: dts: exynos: use generic name for max77693 motor in Midas ARM: dts: exynos: use hyphens in Exynos4 node names ARM: dts: exynos: use hyphens in Exynos3250 node names ARM: dts: exynos: Add interconnects to Exynos4412 mixer ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes ARM: dts: exynos: Add Ethernet to Artik 5 board ARM: dts: exynos: Add a placeholder for a MAC address ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2 ARM: dts: exynos: Add Ethernet interface description for Odroid U3 ARM: dts: exynos: Add Ethernet interface description for Odroid XU ARM: dts: exynos: Add Ethernet interface description for Odroid XU3 Lite ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boards ARM: dts: s5pv210: adjust node names to DT spec ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards ARM: dts: exynos: adjust node names to DT spec in Odroid XU ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards ARM: dts: exynos: remove redundant status=okay in Exynos4412 boards ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-23Merge tag 'renesas-arm-dt-for-v5.11-tag1' of ↵Arnd Bergmann2-0/+321
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.11 - Touch screen and OV5640 camera support for the iWave RainboW Qseven board (G21D), and its camera expansion board, - Support for the AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2 boards, - SPI (MSIOF) support for the R-Car M3-W+ SoC, - Digital Radio Interface (DRIF) support for the R-Car M3-N SoC, - Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo, - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404 arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling arm64: dts: renesas: r8a77965: Add DRIF support arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances arm64: dts: renesas: r8a77961: Add MSIOF nodes arm64: dts: renesas: Align GPIO hog names with dtschema ARM: dts: r8a7742-iwg21d-q7: Add LCD support Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-23Merge tag 'renesas-arm-defconfig-for-v5.11-tag1' of ↵Arnd Bergmann1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v5.11 - Enable support for the new R-Car V3U SoC in the arm64 defconfig, - Refresh shmobile_defconfig for v5.10-rc1. * tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable R8A779A0 SoC ARM: shmobile: defconfig: Refresh for v5.10-rc1 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-23ARM: dts: ux500-golden: Add proper supplies to touchscreenLinus Walleij1-2/+5
This sets up the Atmel maXTouch touchscreen to use proper VDDA and VDD supplies as now supported by bindings and driver. Cc: Stephan Gerhold <[email protected]> Cc: Nick Reitemeyer <[email protected]> Cc: Nick Dyer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2020-11-23ARM: irqstat: Get rid of duplicated declarationThomas Gleixner2-8/+5
irq_cpustat_t is exactly the same as the asm-generic one. Define ack_bad_irq so the generic header does not emit the generic version of it. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Frederic Weisbecker <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: Stop using __raw_*() I/O accessorsGeert Uytterhoeven5-18/+18
There is no reason to keep on using the __raw_{read,write}l() I/O accessors in Renesas ARM platform code. Switch to using the plain {read,write}l() I/O accessors, to have a chance that this works on big-endian. Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: sh73a0: Remove obsolete static mappingGeert Uytterhoeven1-19/+0
There are no more users of the statically mapped IOMEM region on SH-Mobile AG5. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: sh73a0: Use ioremap() to map SMP registersGeert Uytterhoeven1-11/+22
Replace using the legacy IOMEM() macro to map various registers related to secondary CPU bringup by ioremap(). Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: sh73a0: Use ioremap() to map L2C registersGeert Uytterhoeven1-1/+1
Replace using the legacy IOMEM() macro to map the L2C registers by ioremap(). Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: r8a7779: Remove obsolete static mappingsGeert Uytterhoeven1-24/+0
There are no more users of the statically mapped IOMEM regions on R-Car H1. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: r8a7779: Use ioremap() to map SMP registersGeert Uytterhoeven1-3/+9
Replace using the legacy IOMEM() macro to map the ARM Reset Vector Address Register (AVECR) by ioremap(). Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: r8a7779: Use ioremap() to map INTC2 registersGeert Uytterhoeven1-14/+20
Replace using the legacy IOMEM() macro to map various registers related to INTC2 configuration by ioremap(). Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23ARM: shmobile: r8a7778: Introduce HPBREG_BASEGeert Uytterhoeven1-1/+3
Replace the hardcoded address of the HPB Register block by a macro. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-22Merge tag 'efi-urgent-for-v5.10-rc3' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Borislav Petkov: "Forwarded EFI fixes from Ard Biesheuvel: - fix memory leak in efivarfs driver - fix HYP mode issue in 32-bit ARM version of the EFI stub when built in Thumb2 mode - avoid leaking EFI pgd pages on allocation failure" * tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Free efi_pgd with free_pages() efivarfs: fix memory leak in efivarfs_create() efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
2020-11-22ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 NoteMartin Jücker1-1/+1
The reset GPIO logic of the Atmel maxtouch driver was changed to be active low at around the same time P4 Note device tree was accepted into the kernel. Adjust the configuration so that the touchscreen is in a usable state. Signed-off-by: Martin Jücker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-21ARM: dts: keystone-k2g-evm: add HDMI and analog audio dataPeter Ujfalusi1-0/+112
The board is using McASP2 for both analog (tlv320aic3106) and HDMI (SiI9022) audio. 12.288MHz oscillator provides the MCLK for both aic3106 and SiI9022. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]>
2020-11-20Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/nextFlorian Fainelli3-2/+4
- Maxime introduces a quirk to avoid EMI between WiFi and HDMI@1440p on RPi4b. - Pavel fixes dwc2's fifo size to properly support isochronous transfers. Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20ARM: dts: NSP: Provide defaults ports container nodeFlorian Fainelli6-15/+4
Provide an empty 'ports' container node with the correct #address-cells and #size-cells properties. This silences the following warning: arch/arm/boot/dts/bcm958522er.dt.yaml: ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed: 'ports' is a required property 'ethernet-ports' is a required property From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20ARM: dts: NSP: Add a SRAB compatible string for each boardFlorian Fainelli3-0/+12
Provide a valid compatible string for the Ethernet switch node based on the board including the switch. This allows us to have sane defaults and silences the following warnings: arch/arm/boot/dts/bcm958522er.dt.yaml: ethernet-switch@36000: compatible: 'oneOf' conditional failed, one must be fixed: ['brcm,bcm5301x-srab'] is too short 'brcm,bcm5325' was expected 'brcm,bcm53115' was expected 'brcm,bcm53125' was expected 'brcm,bcm53128' was expected 'brcm,bcm5365' was expected 'brcm,bcm5395' was expected 'brcm,bcm5389' was expected 'brcm,bcm5397' was expected 'brcm,bcm5398' was expected 'brcm,bcm11360-srab' was expected 'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab', 'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab', 'brcm,bcm53019-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab', 'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab', 'brcm,bcm58311-srab', 'brcm,bcm58313-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab', 'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab', 'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch', 'brcm,bcm6328-switch', 'brcm,bcm6368-switch'] From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20ARM: dts: NSP: Fix Ethernet switch SGMII register nameFlorian Fainelli1-1/+1
The register name should be "sgmii_config", not "sgmii", this is not a functional change since no code is currently looking for that register by name (or at all). Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20ARM: dts: NSP: Update ethernet switch node nameFlorian Fainelli1-1/+1
Update the switch unit name from srab to ethernet-switch, allowing us to fix warnings such as: CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: srab@18007000: $nodename:0: 'srab@18007000' does not match '^(ethernet-)?switch(@.*)?$' From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20ARM: dts: BCM5301X: Provide defaults ports container nodeFlorian Fainelli12-33/+4
Provide an empty 'ports' container node with the correct #address-cells and #size-cells properties. This silences the following warning: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed: 'ports' is a required property 'ethernet-ports' is a required property From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Acked-by: Rafał Miłecki <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20ARM: dts: BCM5301X: Add a default compatible for switch nodeFlorian Fainelli3-1/+9
Provide a default compatible string which is based on the 53011 SRAB compatible by default. The 4709 and 47094 default to the 53012 SRAB compatible. This allows us to have sane defaults and silences the following warnings: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one must be fixed: ['brcm,bcm5301x-srab'] is too short 'brcm,bcm5325' was expected 'brcm,bcm53115' was expected 'brcm,bcm53125' was expected 'brcm,bcm53128' was expected 'brcm,bcm5365' was expected 'brcm,bcm5395' was expected 'brcm,bcm5389' was expected 'brcm,bcm5397' was expected 'brcm,bcm5398' was expected 'brcm,bcm11360-srab' was expected 'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab', 'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab', 'brcm,bcm53019-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab', 'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab', 'brcm,bcm58311-srab', 'brcm,bcm58313-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab', 'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab', 'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab'] 'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch', 'brcm,bcm6328-switch', 'brcm,bcm6368-switch'] From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Acked-by: Rafał Miłecki <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20ARM: dts: BCM5301X: Update Ethernet switch node nameFlorian Fainelli1-1/+1
Update the switch unit name from srab to ethernet-switch, allowing us to fix warnings such as: CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: srab@18007000: $nodename:0: 'srab@18007000' does not match '^(ethernet-)?switch(@.*)?$' From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-20arm: Enable seccomp architecture trackingKees Cook2-1/+11
To enable seccomp constant action bitmaps, we need to have a static mapping to the audit architecture and system call table size. Add these for arm. Signed-off-by: Kees Cook <[email protected]>
2020-11-20ARM: dts: sun8i: v3s: fix GIC node memory rangeIcenowy Zheng1-1/+1
Currently the GIC node in V3s DTSI follows some old DT examples, and being broken. This leads a warning at boot. Fix this. Fixes: f989086ccbc6 ("ARM: dts: sunxi: add dtsi file for V3s SoC") Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-20ARM: dts: bcm283x: increase dwc2's RX FIFO sizePavel Hofman2-2/+2
The previous version of the dwc2 overlay set the RX FIFO size to 256 4-byte words. This is not enough for 1024 bytes of the largest isochronous high speed packet allowed, because it doesn't take into account extra space needed by dwc2. RX FIFO's size is calculated based on the following (in 4byte words): - 13 locations for SETUP packets 5*n + 8 for Slave and Buffer DMA mode where n is number of control endpoints which is 1 on the bcm283x core - 1 location for Global OUT NAK - 2 * 257 locations for status information and the received packet. Typically two spaces are recommended so that when the previous packet is being transferred to AHB, the USB can receive the subsequent packet. - 10 * 1 location for transfer complete status for last packet of each endpoint. The bcm283x core has 5 IN and 5 OUT EPs - 10 * 1 additional location for EPDisable status for each endpoint - 5 * 2 additional locations are recommended for each OUT endpoint Total is 558 locations. Signed-off-by: Phil Elwell <[email protected]> Signed-off-by: Pavel Hofman <[email protected]> Signed-off-by: Nicolas Saenz Julienne <[email protected]> Link: https://lore.kernel.org/r/[email protected]/
2020-11-20ARM: dts: rpi-4: disable wifi frequenciesMaxime Ripard1-0/+2
The RPi4 WiFi chip and HDMI outputs have some frequency overlap with crosstalk around 2.4GHz. Let's mark it as such so we can use some evasive maneuvers. Signed-off-by: Maxime Ripard <[email protected]> Signed-off-by: Nicolas Saenz Julienne <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers9-9/+9
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Acked-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-11-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski22-50/+55
Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-19ARM: dts: Configure power domain for omap5 dssTony Lindgren1-0/+1
This allows shutting down dss domain when the screen blanks. Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: dts: omap5: add remaining PRM instancesTero Kristo1-0/+57
Add remaining PRM instances for the omap5 SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: OMAP2+: Drop legacy platform data for dra7 gpmcTony Lindgren2-64/+33
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Roger Quadros <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: dts: Configure interconnect target module for dra7 ivaTony Lindgren2-0/+41
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Cc: Suman Anna <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: dts: dra7: add remaining PRM instancesTero Kristo1-0/+76
Add remaining PRM instances for the dra7 SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: OMAP2+: Drop legacy platform data for omap4 gpmcTony Lindgren2-61/+33
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Roger Quadros <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: OMAP2+: Drop legacy platform data for omap4 ivaTony Lindgren2-74/+26
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Suman Anna <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: dts: Configure power domain for omap4 dspTony Lindgren1-0/+1
This allows shutting down the dsp domain when not in use. Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: dts: Configure power domain for omap4 dssTony Lindgren1-0/+7
This allows shutting down dss domain when the screen blanks. Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: dts: omap4: add remaining PRM instancesTero Kristo1-0/+63
Add remaining PRM instances for the omap4 SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: dts: aspeed: ast2600evb: Add MAC0Joel Stanley1-0/+20
MAC0 was not functional in the AST2600A0 SoC. This has been resolved with the A1, so allow use of this port on EVBs with the A1 and subsequent revisions. A0 EVBs will still boot with this change, but the first Ethernet device will not be functional. Signed-off-by: Joel Stanley <[email protected]>
2020-11-19ARM: dts: aspeed: rainier: Don't shout addressesAndrew Jeffery1-2/+2
Make them lowercase. Signed-off-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-19ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restrictedEddie James1-0/+6
Some of the FSI-attached SPI controllers can't use the loop command due to security requirements. Indicate this in the devicetree with the restricted compatible string. Signed-off-by: Eddie James <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-19ARM: OMAP1: clock: Use IS_ERR_OR_NULL() to clean codeTang Bin1-7/+7
Use IS_ERR_OR_NULL() to make the code cleaner. Signed-off-by: Zhang Shengju <[email protected]> Signed-off-by: Tang Bin <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: OMAP2+: Remove redundant null check before ↵Xu Wang1-4/+2
clk_prepare_enable/clk_disable_unprepare Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by: Xu Wang <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: OMAP2+: Remove redundant assignment to variable retJing Xiangfeng1-3/+2
The variable ret has been initialized with '-ENOMEM'. The assignment in the if branch is redundant. So remove it. Signed-off-by: Jing Xiangfeng <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: OMAP2+: Fix kfree NULL pointer in omap2xxx_clkt_vps_initYouling Tang1-4/+1
The returns pointer is NULL when kzalloc fails to apply for space, so fix kfree NULL pointer. Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-19ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_initYouling Tang1-0/+6
If the clk_register fails, we should free hw before function returns to prevent memleak. Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.